Skip to main content

TECNOLOGIAS LASER PARA MEJORAR EL RENDIMIENTO DE MATERIALES EN APLICACIONES PARA ENERGIA

PID2020-113034RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Advanced manufacturing of dense ceramic materials using industrially scalable Laser Furnace technology

  • Özçelik, Can
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Martínez Fernández, Elena
  • Özçelik, Bekir
  • Fuente, Germán F. de la
  • Angurel, Luis A.
Resumen del trabajo presentado al E-MRS Spring Meeting, celebrado virtualmente del 30 de mayo al 3 de junio de 2022., Work funded by the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and by Gobierno de Aragón (research group T54_20R). B. O. acknowledges to the Scientific and Technological Research Council of Turkey (TUBITAK) for a grant via 2219-Science Fellowships and Grant Programmes Department, with the project number:1059B192000390., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Electromagnetic modelling in macroscopic superconductivity. Fundamentals and applications

  • Badía-Majós, Antonio
Resumen del trabajo presentado a la XXXVIII Reunión Bienal de la Real Sociedad Española de Física, celebrada en Murcia del 11 al 15 de julio de 2022., PID2020-113034RB-I00, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Laser induced reverse transfer

  • Rey-García, F.
  • Bao, Chenchen
  • Angurel, Luis A.
  • Fuente, Germán F. de la
Resumen del trabajo presentado a la International Conference on Advanced Materials Science and Engineering and High Tech Devices Applications (ICMATSE), celebrada en Ankara (Turkiye) del 27 al 29 de octubre de 2022., Laser irradiation of transparent substrates in front of an absorbing target results in ablation of the target material and the consequent coating on the back of such substrate. The use of pulsed near-IR lasers is reviewed in this talk, with particular attention to coatings or surface modification produced on glass substrates. This method enables the fabrication of thin coatings on glass at low cost and without the need for vacuum or chemicals. It is thus attractive from the environmental and efficiency points of view. This relatively new fabrication method will be briefly presented and overviewed, and a number of examples analyzed in relation to the coatings obtained and types of lasers used., Work funded by EU project SPRINT (H2020-FETOPEN 801464), the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and by Gobierno de Aragón (research group T54_20R), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Laser technologies to fabricate large scale Bi-2212 superconducting plates

  • Özçelik, Can
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Martínez Fernández, Elena
  • Özçelik, Bekir
  • Fuente, Germán F. de la
  • Angurel, Luis A.
Resumen del trabajo presentado a la International Conference on Advanced Materials Science and Engineering and High Tech Devices Applications (ICMATSE), celebrada en Ankara (Turkiye) del 27 al 29 de octubre de 2022., Due to the properties anisotropy exhibited by high temperature (HTc) superconductors, develop adqate processing technologies is a major challenge. Recently, the laser induced solidification techniques have been using to improve the microstructure of HTc superconductors namely, Bi2Sr2CaCu2O8+x (Bi-2212), REBa2Cu3O7-x (RE-123, RE=Y,Gd). Different laser technologies have been used to fabricate well-textured samples and to machine them without generating cracks. Texture has been controlled using a Laser Zone Melting (LZM) technique while the sample is at thigh temperature in a system calle Laser Furnace. This tecniue can be considered as a modification of the laser line scanning protocol. A very flat solidification front has been obtained in samples up to 100 mm wide. We have fabricated Bi-2212 superconducting samples up to 10cm x 10cm size. The flatness reached in the solidification front allows obtaining misorientation angles lower than 15º in the full width of the sample. The transport properties of these superconducting materials have been correlated with the level of texture and the thickness od the tectured region reached during the laser process. It can be argued that the size of the plate samples is adequate to desing several electrical circuits adapted for different applications., Work funded by the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and by Gobierno de Aragón (research group T54_20R). B. O. acknowledges to the Scientific and Technological Research Council of Turkey (TUBITAK) for a grant via 2219-Science Fellowships and Grant Programmes Department, with the project number:1059B192000390., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Laser zone melting process for fabricating MnFe2O4 spinel ferrites

  • Angurel, Luis A.
  • Özçelik, Bekir
  • Amaveda, H.
  • Fuente, Germán F. de la
Resumen del trabajo presentado a la International Conference on Advanced Materials Science and Engineering and High Tech Devices Applications (ICMATSE), celebrada en Ankara (Turkiye) del 27 al 29 de octubre de 2022., The Laser Furnace (LF) technology has been used to produce uniform, dense MnFe2O4 spinel disks from a mixture of Fe and Mn oxides for controlled synthesis of spinel nanoparticles via Laser Ablation. Application of a CO2 laser in Line Scan mode onto a sample with the desired stoichiometry, enabled melt processing above 1580ºC at its outer surface layer. In this process, a combination of a laser system and a continuous roller furnace operating at a maximum volume temperature of 1000ºC is used. Such combination helps avoid excessive thermal stress, crack formation and catastrophic failure of these magnetic ceramic monoliths. Higher energy incubation values yield increased molten volumes and a thicker resolidified surface layer with a dense microstructure. Despite the high solidification rates imposed, MnFe2O4 spinel is the main phase obtained according to X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and magnetization studies. LF processed samples exhibit a reduction of the coercive fields and an increase of the saturation magnetization values, evidence for soft ferromagnetism and characteristic of the magnetic behavior associated with this spinel. This work demonstrates the convenience of the LF method for preparation of uniform, dense targets for Laser Ablation and other evaporation based techniques used in the fabrication of nanoparticles., B. Özçelik acknowledges to the Scientific and Technological Research Council of Turkey (TUBITAK) for a grant via 2219-Science Fellowships and Grant Programmes Department, with the project number:1059B192000390. Work funded by the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and by Gobierno de Aragón (research group T54_20R)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fabrication of spinel ferrite nanoparticles via laser ablation

  • Özçelik, Bekir
  • Amaveda, H.
  • Angurel, Luis A.
  • Fuente, Germán F. de la
Transition metal ferrite ceramics present very interesting magnetic properties, and are presently being considered in nanometric grain sizes for a number of applications in bioscience. Depending on the preferred transition metal for usage, these ferrite ceramics show stable melt behavior. Thus, they become ideal candidate materials for laser melt processing. Laser Zone Melting process provides many advantages, although until recently it was not possible to process large areas under controlled solidification conditions. These are necessary to exert a good degree of microstructure control. An effective solution to achieve a satisfactory directional solidification interface is found using Laser Line Scanning, where an instantaneous melting line is obtained on a substrate with a planar geometry. The resulting sharp melt-solid interface provides controlled microstructures and a stable melt on a moving material. In this particular case, the movable material is the preferred transition metal ferrite ceramic compact. Laser Line Scanning generates a dense compact on the machined surface that may be suitable for the subsequent production of nanoparticles with controlled properties via Laser Ablation. The purpose of present research is to focus on the evaluation of the microstructural and magnetic properties of nanoparticles of Mn ferrite spinel material fabricated via Laser ablation process., B. Özçelik acknowledges to the Scientific and Technological Research Council of Turkey (TUBITAK) for a grant via 2219-Science Fellowships and Grant Programmes Department, with the project number:1059B192000390. Work funded by the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00) and by Gobierno de Aragón (research group T54_20R)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Iridiscencia: Una propiedad para evaluar la calidad en la generación de nanoestructuras superficiales

  • Porta-Velilla, Luis
  • Andrés, Nieves
  • Arroyo, María del Pilar
  • Castro, Miguel
  • Fuente, Germán F. de la
  • Angurel, Luis A.
Resumen del trabajo presentado al XVI Congreso Nacional de Materiales, celebrado en Ciudad Real del 28 de junio al 1 de julio de 2022., Los autores agradecen la financiación de la Agencia Española de Investigación MCIN/AEI/10.13039/501100011033 (proyecto PID2020-113034RB-I00) y del Gobierno de Aragón (Grupo de investigación T54_20R)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modification of superconducting properties in Nb using laser technologies

  • Angurel, Luis A.
  • Badía-Majós, Antonio
  • Martínez Fernández, Elena
  • Fuente, Germán F. de la
  • Fourneau, Emilie
  • Silhanek, Alejandro V.
Resumen del trabajo presentado al International Forum on Applied Superconductiviy and Magnetism (IFASM), celebrado en Australia del 6 al 8 de diciembbre de 2022., Authors gratefully acknowledge the financial support from the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00), and from Gobierno de Aragón (research group T54_20R). Authors also would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., No