Skip to main content

COORDINACION SEGURA DE VEHICULOS AUTONOMOS

PID2020-114244RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A model predictive scheduling strategy for coordinated inland vessel navigation and bridge operation

  • Segovia Castillo, Pablo
  • Puig, Vicenç
  • Reppa, Vasso
Trabajo presentado en la IEEE Conference on Control Technology and Applications (CCTA), celebrada en Bridgetown (Barbados), del 16 al 18 de agosto de 2023, This paper presents the design of a model predictive scheduling strategy to address the inland waterborne transport (IWT) problem considering bridges that must open to enable vessel passage. The main contribution is the formulation of a control-oriented model of the problem, including propositional logic expressions that characterize system behavior and their conversion into (in)equality constraints. The resulting model is embedded into a predictive scheduling approach to determine bridge opening timetables and vessel passage times in a coordinated manner. The effectiveness of the strategy is demonstrated on a realistic case study based on the Rhine-Alpine corridor., This work was supported in part by the Researchlab Autonomous Shipping (RAS) of Delft University of Technology, in part by the project ”Novel inland waterway transport concepts for moving freight effectively (NOVIMOVE)” (this project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 858508), and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Gaussian Sampling Approach to deal with Imbalanced Telemetry Datasets in Industrial Applications

  • Galve, Sergio
  • Puig, Vicenç
  • Vilajosana, Xavi
Trabajo presentado en el 31st Mediterranean Conference on Control and Automation (MED), celebrado en Limassol (Chipre), del 26 al 29 de junio de 2023, Practical implementation of data analytics in industrial environments has always been a problematic area because of data availability and quality. In this paper, a Gaussian sampling methodology is proposed to address the problem of imbalanced telemetry datasets that is one of the root causes that make modelling less reliable. By generating subsets that achieve homogeneous density distributions this problem is addressed. By comparing the impact of this method with the baseline case of random sampling, this paper aims to address this problem and propose a practical solution. A case study based on an industrial cooling device is used to assess and illustrate the proposed approach., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Robust fault detection using zonotopic parameter estimation

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
This paper addresses the system identification problem, as well as its application to robust fault detection, considering parametric uncertainty and using zonotopes. As a result, a Zonotopic Recursive Least Squares (ZRLS) estimator is proposed and compared with the Setmembership (SM) approach when applied to fault detection, taking as a reference the minimum detectable fault generated in the worst-case. To illustrate the effectiveness of the proposed robust parameter estimation and fault detection methodologies, a quadruple tank process is employed., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional De- velopment Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 ), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalo- nia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a FI AGAUR grant (Ref. 2021FI-B1 00097)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A model predictive scheduling strategy for coordinated inland vessel navigation and bridge operation

  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Reppa, Vasso
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the design of a model predictive scheduling strategy to address the inland waterborne transport (IWT) problem considering bridges that must open to enable vessel passage. The main contribution is the formulation of a control-oriented model of the problem, including propositional logic expressions that characterize system behavior and their conversion into (in)equality constraints. The resulting model is embedded into a predictive scheduling approach to determine bridge opening timetables and vessel passage times in a coordinated manner. The effectiveness of the strategy is demonstrated on a realistic case study based on the Rhine-Alpine corridor., This work was supported in part by the Researchlab Autonomous Shipping (RAS) of Delft University of Technology, in part by the project ”Novel inland waterway transport concepts for moving freight effectively (NOVIMOVE)” (this project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 858508), and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Zonotopic-tube-based LPV motion planner for safety coordination of autonomous vehicles

  • Carrizosa Rendón, Álvaro|||0000-0002-5031-8469
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2023 The Authors. This is an open access article under the CC BY-NC-ND license. Peer review under responsibility of International Federation of Automatic Control., In this paper an optimization-based solution to the collision avoidance challenge for autonomous vehicles is proposed. The presented approach consists in an online motion planner designed to define a feasible and efficient path which implicitly guarantees safety manoeuvres in dynamic surroundings. The fact of considering moving obstacles inside the motion planner increases the complexity of the problem while forces it to be executed more frequently as others. To reduce its computational complexity, this approach proposes a two stages translation of the commonly used non-linear optimization-based structure into a QP formulation which can be easily solved. The first stage is based on the use of LPV matrices in the dynamic constraints of the vehicle. The second stage consists in computing linear expressions by set propagation to obtain the set of permitted inputs and reachable states which guarantee safety conditions., This work has been co-financed by the Spanish State Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and MASHED (TED2021-129927B-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Distributed set-based planning in autonomous vehicles

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Stancu, Alexandru
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Autonomous vehicles require sophisticated planning algorithms to navigate safely and efficiently in complex environments. Traditional centralised planning approaches face scalability challenges, especially as the number of agents increases. Distributed planning strategies have emerged as a promising solution to overcome these limitations. This paper presents a novel approach to distributed set-based planning for autonomous vehicles. Each vehicle can autonomously plan its path by leveraging set-based representations of possible trajectories while considering uncertainty and dynamic environment changes. The proposed method enables vehicles to collaborate efficiently while maintaining decentralised decision-making capabilities, thus enhancing scalability and robustness. Furthermore, safe trajectories are derived by contemplating system uncertainties through set theory., This work has been partially founded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Design of shifting output-feedback controllers for LPV systems subject to time-varying saturations

  • Ruiz Royo, Adrián|||0000-0002-0387-4235
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
This paper considers the problem of designing a shifting output-feedback controller for polytopic linear parameter-varying (LPV) systems subject to time-varying saturations. By means of the LPV framework and the use of the Lyapunov theory, the shifting paradigm concept, and the ellipsoidal invariant theory, a linear matrix inequality (LMI)-based methodology for the controller's design is proposed. The resulting gain-scheduled controller holds the control action in the linearity region of the actuators and regulates online the closed-loop convergence taking into account the instantaneous saturation limit values. The proposed approach is validated by means of an illustrative example., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the University of Stavanger through the project IN-12267. A. Ruiz is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, the European Social Fund (ESF) and AGAUR under a FI SDUR grant (ref. 2020 FI-SDUR 00097)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Unknown input observer scheme for open-flow irrigation channels

  • Arango Restrepo, Juan Pablo
  • Conde, Gregory
  • Duviella, Eric
  • Etienne, Lucien
  • Langueh, Kokou
  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Quijano Silva, Nicanor
In agriculture, most of the water is transported by networks of open channel irrigation systems (OCIS). To ensure an optimal operation of this type of systems, it is very important to have accurate monitoring of all the system state variables. In order to perform robust estimation mitigating the effect of unknown user demands, an unknown input observer for one sided Lipschitz (OSL) quadratically inner bounded (QIB) systems is proposed. The proposed UIO scheme is assessed in a case study based on the Corning channel in California that is modelled uisng material and energy balances. The modeling methodology includes inflows and outflows of matter, along with a transition flow which models the effect of potential energy (channel slope) and kinetic energy (velocity in the transport of matter and frictional losses). The objective of this paper is to show that with the UIO for QIB-OSL systems, costs could be reduced in the purchase of sensors, since the observer is capable of reconstructing the upstream heights from the measurements of the downstream heights, which will be subject to noise and unknown inputs (in this case, user demands)., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Distributed lane selection in autonomous platoon coordination

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Stancu, Alexandru
This paper proposes a novel non-linear lane selection algorithm for autonomous vehicles based on the Optimality Condition Decomposition algorithm. An initial algorithm based on mixed integer quadratic programming was studied, which proved untreatable due to its computational complexity, leading to similar formulations that do not require such a nature in their variables. As a result, a cascade strategy combining both distributed local planning and decision-making layers is implemented, leading to promising results. The proposed approach can determine paths that consider individual goals and the environment so that agents can collaborate to establish a formation that re-configures online, allowing vehicles to reach their individual goals., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Behavior-aware online prediction of obstacle occupancy using zonotopes

  • Carrizosa Rendón, Álvaro|||0000-0002-5031-8469
  • Zhou, Jian
  • Frisk, Erik
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Predicting the motion of surrounding vehicles is key to safe autonomous driving, especially in unstructured environments without prior information. This paper proposes a novel online method to accurately predict the occupancy sets of surrounding vehicles based solely on motion observations. The approach is divided into two stages: first, an Extended Kalman Filter and a Linear Programming (LP) problem are used to estimate a compact zonotopic set of control actions; then, a reachability analysis propagates this set to predict future occupancy. The effectiveness of the method has been validated through simulations in an urban environment, showing accurate and compact predictions without relying on prior assumptions or prior training data., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group ref. 2021/SGR/278). J. Zhou and E. Frisk acknowledge the support by Strategic Research Area at Linkoping- ¨ Lund in Information Technology (ELLIIT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Robust unknown Input observer design for uncertain and noisy OSL-QIB nonlinear systems

  • Arango Restrepo, Juan Pablo
  • Etienne, Lucien
  • Duviella, Eric
  • Langueh, Kokou
  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, the problem of designing a robust unknown input observer (RUIO) for quadratically inner bounded (QIB), one-sided Lipschitz (OSL) nonlinear systems in the presence of noise and unknown inputs is addressed. This RUIO is formulated as a convex optimization problem where parameter uncertainty and noise are considered. Sufficient conditions for observer gain synthesis are shown to be equivalent to solving a finite set of Linear Matrix Inequalities (LMIs) and a Linear Matrix Equality (LME). Two illustrative examples, a bioreactor for biomass production from substrate consumption and a robot manipulator, are used to test the effectiveness of the approach in the presence of unknown inputs, parameter uncertainty, and measurement noise., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020- 115905RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Fault prognosis approach using data-driven structurally generated residuals

  • Fang, Xin
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fault prognosis approach using data-driven structurally generated residuals. It assumes that a set of residuals generated using structural analysis (SA) and identified using data-driven approach are available. Residuals are used for fault detection purposes activating fault signals when residual values reach anomalous values. In addition, it is possible to predict future faults by means of the detection of anomalous residual deviations. Once an anomalous change in the residual trend has been detected, it is proceed to estimate when this residual deviation will result in a fault detection and therefore which will be the Remaining Useful Life (RUL) time of the system. For this purpose, the future residual evolution is estimated by means of a regressor function. Nominal and interval parameters of regressor function are estimated with available residual data providing nominal and interval values of the RUL of the system. A brushless direct current (BLDC) motor is used as the application case study to illustrate the performance of proposed approach., This work has been co-financed by the Spanish ResearchAgency (AEI) through the projects SaCoAV (ref. MINECOPID2020-114244RB-I00)andL-BEST(PID2020115905RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A two-level economic health-aware LPV MPC of a wind turbine

  • Khoury, Boutrous
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper considers the possibility of a direct incorporation of wind turbine prognostic information in the framework of model predictive control culminating in a Health Aware MPC design. The wind turbine blades, the chosen component of the study, are subjected to flapwise edge root moment, as a stress component, to acquire important prognostic information of degradation via the well-established stiffness degradation methodology. An optimization problem is solved by considering segmented degradation functions based on accumulated stress values on the blades. A two-level Linear Parameter Varying control scheme is proposed to allow for wind turbine control at different operating regions of wind and also to circumvent non-linearities in the MPC setup. The controller establishes a trade-off between standard wind turbine control objectives and the mitigation of component degradation concerning wind turbine blades. A 5 MW benchmark wind turbine is used as a case study for illustrative purposes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Robust data-driven TS MPC-based reference governor for an autonomous racing vehicle considering battery state of charge

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A reference governor approach based on model predictive control (MPC-RG) for an autonomous racing vehicle is developed in this work. This control strategy avoids constraint violations and includes online health management capabilities by solving a multi-objective optimization problem. In this case, a trade-off between the maximization of the state of charge of the battery and the longitudinal velocity, even the minimization of the control actions variation is carried out. In turn, the invariant zonotopic sets analysis ensures the convergence of states to a stable region. On the other hand, the proposed control scheme also combines a robust states feedback linear quadratic regulator (LQR) with a Kalman filter (KF) estimator to compensate for model uncertainty and exogenous disturbances, as well as, to estimate the unmeasured lateral velocity. Moreover, to represent the non-linear behaviour of the vehicle, a data-driven neuro-fuzzy Takagi-Sugeno (TS) model is employed. The developed approach is tested and evaluated in realistic environments by means of a simulated 1/10 Scale RC car., This work has been co-financed by the Spanish Research Agency (AEI) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A set-based uncertainty quantification of evolving fuzzy models for data-driven prognostics

  • Khoury, Boutrous
  • Bessa, Iury
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
Recent years have seen a great deal of innovation in the field of systems prognostics and health management. However, even with these advancements, some pertinent issues related with uncertainty in remaining useful life predictions are still open for investigation. One such area of interest is on how to account for the distribution of these predictions such that all uncertainty sources are duly captured and represented. Practically, these uncertainty quantification procedures must be computationally feasible for real-life deployment and reflect real-life situations devoid of strong assumptions. This article thus, proposes a data-based prognostics technique that uses a set-based quantification of uncertainty based on the set-membership paradigm, the interval predictor approach. The methodology is applied in the framework of the Evolving Ellipsoidal Fuzzy Information Granule which has recently proven its potency in prognostics applications. As a case study, the method is tested on the prognostics of insulated bipolar transistors utilising an accelerated aging IGBT dataset from the NASA Ames Research Center., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Fault detection using data-driven LPV state estimation based on structural analysis and ANFIS

  • Fang, Xin
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a data-driven fault detection method combining structural analysis (SA) and machine learning data-driven algorithms. Given a graphic (or textual) system description and the available inputs/outputs measurements, the structure of analytical redundancy relations (ARRs) between some inputs and outputs can be determined with the aid of the SA of the system. Then, using a machine learning data-driven approach applied to historical data, analytical relations between inputs and outputs can be obtained. Thereby, instead of finding ARRs from physical mathematical model, ARRs are obtained combining SA and data-driven approaches. In this paper, the adaptive network fuzzy inference system (ANFIS) data-driven approach is used to implement the diagnosis system. Once the ANFIS model has been identified, it is reformulated in linear parameter varying (LPV) form. Then, a fault detection scheme based on a LPV Kalman filter and pole placement method is developed. A well-known case study based on a four-tanks system is used for illustrative purposes., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C2I)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Interval-based fault diagnosis in wind turbines using structural analysis and gaussian process regression*

  • Pérez Pérez, Esvan de Jesús
  • Valencia Palomo, Guillermo
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Santos Ruiz, Ildeberto
  • Guzmán Rabasa, Julio Alberto
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a hybrid fault diagnosis approach for wind turbines that integrates structural analysis through Analytical Redundancy Relations (ARRs) with datadriven modeling using Gaussian Process Regression (GPR). The proposed method leverages the physical structure of the system to define input-output dependencies and trains GPR estimators on fault-free operational data to predict key subsystem outputs. Residuals are computed by comparing sensor measurements with GPR predictions, and faults are detected using a combination of interval-based thresholds and Cumulative Sum (CUSUM) control charts. The proposed approach is validated on a simulated 5-MW wind turbine benchmark model under realistic operating conditions. Various fault scenarios are injected in the pitch actuator, drivetrain, and generator subsystems. Results demonstrate the fault diagnosis accuracy, robustness, and early detection capability across diverse fault types., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 )., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A two-level economic health-aware LPV MPC of a wind turbine

  • Khoury, Boutrous
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper considers the possibility of a direct incorporation of wind turbine prognostic information in the framework of model predictive control culminating in a Health Aware MPC design. The wind turbine blades, the chosen component of the study, are subjected to flapwise edge root moment, as a stress component, to acquire important prognostic information of degradation via the well-established stiffness degradation methodology. An optimization problem is solved by considering segmented degradation functions based on accumulated stress values on the blades. A two-level Linear Parameter Varying control scheme is proposed to allow for wind turbine control at different operating regions of wind and also to circumvent non-linearities in the MPC setup. The controller establishes a trade-off between standard wind turbine control objectives and the mitigation of component degradation concerning wind turbine blades. A 5 MW benchmark wind turbine is used as a case study for illustrative purposes., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A set-based uncertainty quantification of evolving fuzzy models for data-driven prognostics

  • Khoury, Boutrous
  • Bessa, Iury
  • Nejjari Akhi-Elarab, Fatiha
  • Puig Cayuela, Vicenç
Recent years have seen a great deal of innovation in the field of systems prognostics and health management. However, even with these advancements, some pertinent issues related with uncertainty in remaining useful life predictions are still open for investigation. One such area of interest is on how to account for the distribution of these predictions such that all uncertainty sources are duly captured and represented. Practically, these uncertainty quantification procedures must be computationally feasible for real-life deployment and reflect real-life situations devoid of strong assumptions. This article thus, proposes a data-based prognostics technique that uses a set-based quantification of uncertainty based on the set-membership paradigm, the interval predictor approach. The methodology is applied in the framework of the Evolving Ellipsoidal Fuzzy Information Granule which has recently proven its potency in prognostics applications. As a case study, the method is tested on the prognostics of insulated bipolar transistors utilising an accelerated aging IGBT dataset from the NASA Ames Research Center., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Robust data-driven TS MPC-based reference governor for an autonomous racing vehicle considering battery state of charge

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A reference governor approach based on model predictive control (MPC-RG) for an autonomous racing vehicle is developed in this work. This control strategy avoids constraint violations and includes online health management capabilities by solving a multi-objective optimization problem. In this case, a trade-off between the maximization of the state of charge of the battery and the longitudinal velocity, even the minimization of the control actions variation is carried out. In turn, the invariant zonotopic sets analysis ensures the convergence of states to a stable region. On the other hand, the proposed control scheme also combines a robust states feedback linear quadratic regulator (LQR) with a Kalman filter (KF) estimator to compensate for model uncertainty and exogenous disturbances, as well as, to estimate the unmeasured lateral velocity. Moreover, to represent the non-linear behaviour of the vehicle, a data-driven neuro-fuzzy Takagi-Sugeno (TS) model is employed. The developed approach is tested and evaluated in realistic environments by means of a simulated 1/10 Scale RC car., This work has been co-financed by the Spanish Research Agency (AEI) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Behavior-aware online prediction of obstacle occupancy using zonotopes

  • Carrizosa Rendón, Álvaro
  • Zhou, Jian
  • Frisk, Erik
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Predicting the motion of surrounding vehicles is key to safe autonomous driving, especially in unstructured environments without prior information. This paper proposes a novel online method to accurately predict the occupancy sets of surrounding vehicles based solely on motion observations. The approach is divided into two stages: first, an Extended Kalman Filter and a Linear Programming (LP) problem are used to estimate a compact zonotopic set of control actions; then, a reachability analysis propagates this set to predict future occupancy. The effectiveness of the method has been validated through simulations in an urban environment, showing accurate and compact predictions without relying on prior assumptions or prior training data., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group ref. 2021/SGR/278). J. Zhou and E. Frisk acknowledge the support by Strategic Research Area at Linkoping- ¨ Lund in Information Technology (ELLIIT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Unknown input observer scheme for open-flow irrigation channels

  • Arango Restrepo, Juan Pablo
  • Conde, Gregory
  • Duviella, Eric
  • Etienne, Lucien
  • Langueh, Kokou
  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
  • Ocampo-Martínez, Carlos
  • Quijano Silva, Nicanor
In agriculture, most of the water is transported by networks of open channel irrigation systems (OCIS). To ensure an optimal operation of this type of systems, it is very important to have accurate monitoring of all the system state variables. In order to perform robust estimation mitigating the effect of unknown user demands, an unknown input observer for one sided Lipschitz (OSL) quadratically inner bounded (QIB) systems is proposed. The proposed UIO scheme is assessed in a case study based on the Corning channel in California that is modelled uisng material and energy balances. The modeling methodology includes inflows and outflows of matter, along with a transition flow which models the effect of potential energy (channel slope) and kinetic energy (velocity in the transport of matter and frictional losses). The objective of this paper is to show that with the UIO for QIB-OSL systems, costs could be reduced in the purchase of sensors, since the observer is capable of reconstructing the upstream heights from the measurements of the downstream heights, which will be subject to noise and unknown inputs (in this case, user demands)., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Zonotopic-tube-based LPV motion planner for safety coordination of autonomous vehicles

  • Carrizosa Rendón, Álvaro
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2023 The Authors. This is an open access article under the CC BY-NC-ND license. Peer review under responsibility of International Federation of Automatic Control., In this paper an optimization-based solution to the collision avoidance challenge for autonomous vehicles is proposed. The presented approach consists in an online motion planner designed to define a feasible and efficient path which implicitly guarantees safety manoeuvres in dynamic surroundings. The fact of considering moving obstacles inside the motion planner increases the complexity of the problem while forces it to be executed more frequently as others. To reduce its computational complexity, this approach proposes a two stages translation of the commonly used non-linear optimization-based structure into a QP formulation which can be easily solved. The first stage is based on the use of LPV matrices in the dynamic constraints of the vehicle. The second stage consists in computing linear expressions by set propagation to obtain the set of permitted inputs and reachable states which guarantee safety conditions., This work has been co-financed by the Spanish State Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and MASHED (TED2021-129927B-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Distributed set-based planning in autonomous vehicles

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç
  • Stancu, Alexandru
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Autonomous vehicles require sophisticated planning algorithms to navigate safely and efficiently in complex environments. Traditional centralised planning approaches face scalability challenges, especially as the number of agents increases. Distributed planning strategies have emerged as a promising solution to overcome these limitations. This paper presents a novel approach to distributed set-based planning for autonomous vehicles. Each vehicle can autonomously plan its path by leveraging set-based representations of possible trajectories while considering uncertainty and dynamic environment changes. The proposed method enables vehicles to collaborate efficiently while maintaining decentralised decision-making capabilities, thus enhancing scalability and robustness. Furthermore, safe trajectories are derived by contemplating system uncertainties through set theory., This work has been partially founded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Design of shifting output-feedback controllers for LPV systems subject to time-varying saturations

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego Seix, Bernardo
This paper considers the problem of designing a shifting output-feedback controller for polytopic linear parameter-varying (LPV) systems subject to time-varying saturations. By means of the LPV framework and the use of the Lyapunov theory, the shifting paradigm concept, and the ellipsoidal invariant theory, a linear matrix inequality (LMI)-based methodology for the controller's design is proposed. The resulting gain-scheduled controller holds the control action in the linearity region of the actuators and regulates online the closed-loop convergence taking into account the instantaneous saturation limit values. The proposed approach is validated by means of an illustrative example., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the University of Stavanger through the project IN-12267. A. Ruiz is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, the European Social Fund (ESF) and AGAUR under a FI SDUR grant (ref. 2020 FI-SDUR 00097)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Fault prognosis approach using data-driven structurally generated residuals

  • Fang, Xin
  • Blesa Izquierdo, Joaquim
  • Puig Cayuela, Vicenç
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fault prognosis approach using data-driven structurally generated residuals. It assumes that a set of residuals generated using structural analysis (SA) and identified using data-driven approach are available. Residuals are used for fault detection purposes activating fault signals when residual values reach anomalous values. In addition, it is possible to predict future faults by means of the detection of anomalous residual deviations. Once an anomalous change in the residual trend has been detected, it is proceed to estimate when this residual deviation will result in a fault detection and therefore which will be the Remaining Useful Life (RUL) time of the system. For this purpose, the future residual evolution is estimated by means of a regressor function. Nominal and interval parameters of regressor function are estimated with available residual data providing nominal and interval values of the RUL of the system. A brushless direct current (BLDC) motor is used as the application case study to illustrate the performance of proposed approach., This work has been co-financed by the Spanish ResearchAgency (AEI) through the projects SaCoAV (ref. MINECOPID2020-114244RB-I00)andL-BEST(PID2020115905RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Robust fault detection using zonotopic parameter estimation

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
This paper addresses the system identification problem, as well as its application to robust fault detection, considering parametric uncertainty and using zonotopes. As a result, a Zonotopic Recursive Least Squares (ZRLS) estimator is proposed and compared with the Setmembership (SM) approach when applied to fault detection, taking as a reference the minimum detectable fault generated in the worst-case. To illustrate the effectiveness of the proposed robust parameter estimation and fault detection methodologies, a quadruple tank process is employed., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional De- velopment Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 ), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalo- nia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a FI AGAUR grant (Ref. 2021FI-B1 00097)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Robust unknown Input observer design for uncertain and noisy OSL-QIB nonlinear systems

  • Arango Restrepo, Juan Pablo
  • Etienne, Lucien
  • Duviella, Eric
  • Langueh, Kokou
  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, the problem of designing a robust unknown input observer (RUIO) for quadratically inner bounded (QIB), one-sided Lipschitz (OSL) nonlinear systems in the presence of noise and unknown inputs is addressed. This RUIO is formulated as a convex optimization problem where parameter uncertainty and noise are considered. Sufficient conditions for observer gain synthesis are shown to be equivalent to solving a finite set of Linear Matrix Inequalities (LMIs) and a Linear Matrix Equality (LME). Two illustrative examples, a bioreactor for biomass production from substrate consumption and a robot manipulator, are used to test the effectiveness of the approach in the presence of unknown inputs, parameter uncertainty, and measurement noise., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020- 115905RB-C21)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A model predictive scheduling strategy for coordinated inland vessel navigation and bridge operation

  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
  • Reppa, Vasso
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the design of a model predictive scheduling strategy to address the inland waterborne transport (IWT) problem considering bridges that must open to enable vessel passage. The main contribution is the formulation of a control-oriented model of the problem, including propositional logic expressions that characterize system behavior and their conversion into (in)equality constraints. The resulting model is embedded into a predictive scheduling approach to determine bridge opening timetables and vessel passage times in a coordinated manner. The effectiveness of the strategy is demonstrated on a realistic case study based on the Rhine-Alpine corridor., This work was supported in part by the Researchlab Autonomous Shipping (RAS) of Delft University of Technology, in part by the project ”Novel inland waterway transport concepts for moving freight effectively (NOVIMOVE)” (this project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 858508), and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Interval-based fault diagnosis in wind turbines using structural analysis and gaussian process regression*

  • Pérez Pérez, Esvan de Jesús
  • Valencia Palomo, Guillermo
  • Puig Cayuela, Vicenç
  • Santos Ruiz, Ildeberto
  • Guzmán Rabasa, Julio Alberto
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a hybrid fault diagnosis approach for wind turbines that integrates structural analysis through Analytical Redundancy Relations (ARRs) with datadriven modeling using Gaussian Process Regression (GPR). The proposed method leverages the physical structure of the system to define input-output dependencies and trains GPR estimators on fault-free operational data to predict key subsystem outputs. Residuals are computed by comparing sensor measurements with GPR predictions, and faults are detected using a combination of interval-based thresholds and Cumulative Sum (CUSUM) control charts. The proposed approach is validated on a simulated 5-MW wind turbine benchmark model under realistic operating conditions. Various fault scenarios are injected in the pitch actuator, drivetrain, and generator subsystems. Results demonstrate the fault diagnosis accuracy, robustness, and early detection capability across diverse fault types., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 )., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Fault detection using data-driven LPV state estimation based on structural analysis and ANFIS

  • Fang, Xin
  • Blesa Izquierdo, Joaquim
  • Puig Cayuela, Vicenç
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a data-driven fault detection method combining structural analysis (SA) and machine learning data-driven algorithms. Given a graphic (or textual) system description and the available inputs/outputs measurements, the structure of analytical redundancy relations (ARRs) between some inputs and outputs can be determined with the aid of the SA of the system. Then, using a machine learning data-driven approach applied to historical data, analytical relations between inputs and outputs can be obtained. Thereby, instead of finding ARRs from physical mathematical model, ARRs are obtained combining SA and data-driven approaches. In this paper, the adaptive network fuzzy inference system (ANFIS) data-driven approach is used to implement the diagnosis system. Once the ANFIS model has been identified, it is reformulated in linear parameter varying (LPV) form. Then, a fault detection scheme based on a LPV Kalman filter and pole placement method is developed. A well-known case study based on a four-tanks system is used for illustrative purposes., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C2I)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Distributed lane selection in autonomous platoon coordination

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç
  • Stancu, Alexandru
This paper proposes a novel non-linear lane selection algorithm for autonomous vehicles based on the Optimality Condition Decomposition algorithm. An initial algorithm based on mixed integer quadratic programming was studied, which proved untreatable due to its computational complexity, leading to similar formulations that do not require such a nature in their variables. As a result, a cascade strategy combining both distributed local planning and decision-making layers is implemented, leading to promising results. The proposed approach can determine paths that consider individual goals and the environment so that agents can collaborate to establish a formation that re-configures online, allowing vehicles to reach their individual goals., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (author's final draft)