Skip to main content

NEW-GENERATION MICROWAVE PASSIVE COMPONENTS FOR ADVANCED WIRELESS-COMMUNICATIONS/RF-SENSING PLATFORMS

PID2020-116983RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

High-order input-reflectionless quasi-elliptic-type wideband bandpass filter using dual-mode slotline resonator

  • Yang, Li|||0000-0002-1264-4810
  • Psychogiou, Dimitra
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 Asia-Pacific Microwave Conference (APMC), 29 November to 02 December 2022, Yokohama, Japan., A high-order input-reflectionless quasi-elliptic-type wideband bandpass filter (BPF) that exploits a complementary-diplexer-based topology is reported. Firstly, a fourth-order wideband microstrip-to-microstrip vertical transition employing a dual-mode slotline resonator as the reflective-type BPF channel is designed. It features a sharp-rejection BPF response with two close-to-passband transmission zeros (TZs). To attain broadband input-reflectionless behavior, a shunt resistively-terminated microstrip π-shape network is used as the absorptive bandstop-filter (BSF) channel. The RF theoretical operational principle of the conceived broadband BPF is detailed. Compared to prior-art high-order input-/two-port-reflectionless wideband BPFs, the proposed BPF features not only improved passband flatness at the passband edges, but also relatively-high stopband power-attenuation levels and power-absorption ratios. For experimental-validation purposes, a two-layer fourth-order BPF microstrip prototype centered at 1 GHz is developed and tested., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Planar high-order broad-band bandpass filters based on two-stage quadrature couplers and their digital modeling

  • Yang, Li|||0000-0002-1264-4810
  • Martínez Piqueras, Gaspar
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 24th International Microwave and Radar Conference (MIKON), 12-14 September 2022, Gdansk, Poland., Planar two-stage branch-line directional power couplers are applied in this paper to the design of transversalsignal-interference high-order wide-band bandpass filters (BPFs) with very-sharp-rejection characteristics. In comparison with the previously-reported experimental BPF demonstrators of their precursors—i.e., those using transversal filtering sections (TFSs) with one-stage branch-line couplers loaded by longer dissimilar stubs—, an enlarged-bandwidth passband with a higher number of in-band reflection zeros and lower amplitude variation can be obtained. Moreover, multiple transmission zeros (TZs) can be created in the out-of-band region owing to the intrinsic signal-energy cancelation phenomena of the transversal signal-interference philosophy, which result in highselectivity filtering capabilities. As further conceptual understanding of the devised two-stage-coupler signal-interference BPFs, a digital-modeling interpretation for various illustrative synthesis examples is provided. In addition, for experimentalvalidation purposes, single- and two-TFS-based microstrip prototypes of wide-band BPFs centered at 2 GHz are manufactured and characterized. In these circuits, inter-digital-type input/output feeding sections are co-integrated. They allow to extend the lower/upper stopband bandwidths with regard to those inherent to their isolated two-stage-coupler-based TFSs., Agencia Estatal de Investigación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Input-absorptive high-order wideband balun bandpass filters with quasi-elliptic-type response

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 52th European Microwave Conference (EuMC), 27-29 September 2022, Milan, Italy., A class of input-reflectionless high-order wideband balun bandpass filters (BPFs) with quasi-elliptic-type response are reported. They consist of two main circuit parts: 1) a three-port reflective-type high-order balun BPF network and 2) a resistivelyterminated microstrip T-junction that is shunt connected at the unbalanced port. The reflective-type balun BPFs developed with 5th- and 6th-order Chebyshev equal-ripple responses are firstly described. By replacing the last two virtually-short-circuit-ended quarter-wavelength transmission-line (TL) stubs with opencircuit-ended half-wavelength TL stubs, their balun counterparts with two close-to-passband transmission zeros (TZs) are then presented. As design example, a 5th-order input-reflectionless quasi-elliptic-type wideband balun BPF is theoretically discussed. Furthermore, for experimental-validation purposes, a proof-ofconcept two-layer microstrip prototype of 5th-order balun BPF is simulated and tested. Its measured metrics are 2.05-GHz center frequency, 3-dB fractional bandwidth of 63.61% for the two output ports, input-power-matching levels higher than 10 dB, and stopband-power-rejection levels above 26.1 dB from DC to 5 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Multilayered balanced wideband bandpass filter with high filtering selectivity

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), 17-19 Nov. 2021, Peruggia, Italy., A type of multilayered balanced wideband bandpass filter (BPF) with high filtering selectivity is presented. It is composed of two back-to-back cascaded microstrip-tomicrostrip vertical transitions using slotline stepped-impedance resonators (SIRs). Under differential-mode excitation, a sharprejection fifth-order wideband filtering transfer function with two paired close-to-passband transmission zeros can be attained in the proposed balanced BPF. Moreover, high common-mode suppression levels within the differential-mode passband range are achieved. For experimental-demonstration purposes, a microstrip prototype of the devised balanced wideband BPF architecture is developed and tested. It exhibits a measured differential-mode fifth-order high-selectivity wideband filtering response with center frequency of 4.015 GHz, 3-dB fractional bandwidth of 38.06%, and minimum in-band power-insertionloss level of 0.947 dB. The common-mode suppression levels are above 20 dB from 2.075 to 5.588 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Two-layered microstrip diplexer based on high-selectivity wideband bandpass filters

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 IEEE Radio and Wireless Symposium (RWS), 16-19 Jan. 2022, Las Vegas, NV, USA., This paper presents a microstrip diplexer based on two high-selectivity wideband bandpass filters (BPFs) in a twolayered structure. Both the lower and upper channels are designed with third-order microstrip-to-microstrip vertical transitions using open-circuit-ended slotline stepped-impedance resonators (SIRs). Specifically, open-circuit-ended microstrip lines on the top and bottom layers for the lower channel are employed, whereas the upper channel is equipped with short-circuit-ended ones. Thus, owing to the slotline SIRs, two close-to-passband transmission zeros (TZs) leading to sharp-rejection capabilities for both BPF channels are attained. The theoretical foundations and RF operating principles of the devised diplexer are discussed in detail. For practical-validation purposes, a two-layered microstrip wideband diplexer prototype is designed, simulated, and tested. It features two three-pole high-selectivity filtering responses for the measured lower and upper channels that are centered at 1.52 GHz and 2.76 GHz, and exhibit 3-dB fractional bandwidths of 60% and 24.93%, respectively., European Commission, Agencia Estatal de Investigación