Skip to main content

MEJORA DE LA CALIDAD DE POTENCIA EN SISTEMAS DE POTENCIA REMOTOS SIN CONEXION A RED CON ELEVADA PENETRACION DE CONVERTIDORES ELECTRONICOS DE POTENCIA

PID2021-122835OB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Improving voltage ride-through procedures in distributed generation systems by reinforcement learning

  • Fathollahi, Mohana|||0009-0009-5015-743X
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Velasco García, Manel|||0000-0002-0764-3063
  • Martí Colom, Pau|||0000-0002-5189-0782
  • Angulo Bahón, Cecilio|||0000-0001-9589-8199
  • Hampton, Jerrad
During the last two decades, the operation of the electrical grid has undergone significant changes. This evolution is closely tied to the integration of power electronics into distributed generation systems, which led to increased utilization of renewable energy and as a consequence mitigating climate change by lowering emissions. On the other hand, artificial intelligence plays a considerable role in shaping the development and progress of various technologies, such as the electrical grid. This work presents a study for the application of Reinforcement Learning (RL) tools in distributed generation systems. The objective of using RL is to address voltage perturbations in real time. RL will be useful to maximize the resilience of the system in the event of short circuits of a short duration and minimize the risk of disconnect., This article is supported by the ’Siemens Energy AI Chair: Energy Sustainability for a Decarbonized Society 5.0’ (TSI-100930-2023-5), funded by the SEDIA, and co-funded by the European Union-Next Generation EU, and by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/10.13039/501000011033 and FEDER., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Active-power voltage-support for a microgrid under short-circuits, modelled in complex valued domain

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Chico Villegas, José Pascual|||0009-0006-4453-5121
The growing number of electric vehicles (EVs) connected to the grid are a promising potential to support the overall system stability, known as vehicle to grid concept. During grid faults these vehicles can be seen as distributed dispatchable sources that can collaborate to the system restoration. In the case of islanded microgrids under a fault, electric vehicles can provide its stored energy in order to imitate the low voltage ride through protocols (LVRT) that are required to distributed generation systems connected to the main grid. The islanded microgrid tested here is composed of grid-forming voltage sources supplying different loads, some of them EVs. The proposal in this work is that, during a voltage sag caused by an overcurrent in the system, EVs must inject active power to support the voltage, instead of supplying reactive power as LVRT require. The theoretical reasoning of this new approach will be supported by a complete system modelling in the complex valued domain. Selected experimental results demonstrate the effectiveness of the control proposal., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Agrixel. AI-based service standard for agricultural data in agri-food use cases

  • Eeckhout Alsinet, Joan van
  • Dimic, Miona|||0009-0008-1869-3585
  • Angulo Bahón, Cecilio|||0000-0001-9589-8199
We introduce a new interoperable geographic standard called agrixel, which employs a unique and innovative data processing methodology—similar to pixels in computer vision or tokens in language processing—leveraging computational power and machine learning in shared data spaces. Focused on AI-driven services for the agri-food sector and founded in a defined ontology, it offers a service portfolio for the sector itself, its externalities, and the circularity of its products. The agrixel standard ensures findable, accessible, interoperable, and reusable (FAIR) data, compatible with existing solutions. It supports multiple data layers, enabling extensions to externalities, such as carbon footprint, energy use, water management, logistics, and transport—enhancing efficiency in agri-food production and consumption., Joan van Eeckhout and Miona Dimic acknowledge the support of the Spanish Ministry for Digital Transformation and Public Service through the Secretariat of State for Digitalisation and Artificial Intelligence (project Agrixel ES, TSI-100121-2024-019) as part of the “Plan to Promote Sectoral Data Spaces” under the Recovery, Transformation and Resilience Plan, financed by the European Union – NextGenerationEU. Prof. Cecilio Angulo is also acknowledging co-funds from the European Union – NextGenerationEU, through the I+D+i PID2021-122835OBC21 research project ARTIFACTS (MCIN/AEI/10.13039/501000011033) and FEDER “Una manera de hacer Europa”., Peer Reviewed, 2 - Fam zero, 12 - Producció i Consum Responsables, 13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Distributed generator with virtual grid-based remote voltage unbalance compensation and maximum current limiting

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes a control scheme for a distributed generator to eliminate the negative-sequence voltage at a remote point of the power system based on the virtual grid concept. The proposed control includes an additional algorithm for limiting the maximum current of the three-phase inverter. This protects the inverter from overcurrent and thus prevents it from being damaged. The aforementioned properties are achieved through the use of both local voltage and current measurements, as well as the remote negative-sequence voltage, which is received by the communication system. The static and dynamic characteristics of the proposed control are validated by selected experimental results obtained in a laboratory setting. © 2024 IEEE., This publication is part of the project PID2021-1228350BC21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Eurupa"., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Model predictive control for an LCL voltage source inverter with active damping capability and current limitation

  • Chico Villegas, José Pascual|||0009-0006-4453-5121
  • Guzmán Solà, Ramon|||0000-0002-4386-5800
  • García de Vicuña Muñoz de la Nava, José Luis|||0000-0003-2947-849X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Komurcugil, Hasan
This paper presents a model predictive control (MPC) for a grid-connected voltage source inverter (VSI) with current limitation. The control algorithm is performed in the dq frame to obtain the amplitude of the inverter currents. First, a state observer with a reduced model of the converter is used to estimate the inverter current and perform active damping. Then, an MPC algorithm is used to regulate the currents to a desired reference but with the advantage that these currents can be limited to a maximum value by introducing a constraint in the cost function instead of clipping the current of the inverter above a maximum current. This controller has been tested experimentally under a current reference step change and without a physical damping resistor., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A sliding mode control for a grid-connected three-phase voltage source inverter based on a new reference frame

  • Chico Villegas, José Pascual|||0009-0006-4453-5121
  • Guzmán Solà, Ramon|||0000-0002-4386-5800
  • García de Vicuña Muñoz de la Nava, José Luis|||0000-0003-2947-849X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Borrell Sanz, Ángel
This paper presents a switching strategy for a grid-connected voltage source inverter (VSI) using sliding mode control (SMC). The conventional SMC suffers from sliding losses due to the cross-coupling among controllers by the neutral point voltage expression. This issue can be addressed by using the switching technique to obtain the voltage and currents in a new reference frame through a non-linear transformation. In this frame, a decoupled non-linear model of the VSI is derived, and two sliding mode controllers are designed using hysteresis band comparators. The switching strategy not only avoids sliding losses but also increases the control range of the converter by introducing a third harmonic by the control signal. Simulation results using Matlab Simulink are provided to validate the robustness of the proposed controller., This publication is part of the project I+D+i PID2021-122835OB-C21, f inanced by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Distributed generator with virtual grid-based remote voltage unbalance compensation and maximum current limiting

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
  • Castilla Fernández, Miguel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes a control scheme for a distributed generator to eliminate the negative-sequence voltage at a remote point of the power system based on the virtual grid concept. The proposed control includes an additional algorithm for limiting the maximum current of the three-phase inverter. This protects the inverter from overcurrent and thus prevents it from being damaged. The aforementioned properties are achieved through the use of both local voltage and current measurements, as well as the remote negative-sequence voltage, which is received by the communication system. The static and dynamic characteristics of the proposed control are validated by selected experimental results obtained in a laboratory setting. © 2024 IEEE., This publication is part of the project PID2021-1228350BC21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Eurupa"., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Improving voltage ride-through procedures in distributed generation systems by reinforcement learning

  • Fathollahi, Mohana
  • Camacho Santiago, Antonio
  • Velasco García, Manel
  • Martí Colom, Pau
  • Angulo Bahón, Cecilio
  • Hampton, Jerrad
During the last two decades, the operation of the electrical grid has undergone significant changes. This evolution is closely tied to the integration of power electronics into distributed generation systems, which led to increased utilization of renewable energy and as a consequence mitigating climate change by lowering emissions. On the other hand, artificial intelligence plays a considerable role in shaping the development and progress of various technologies, such as the electrical grid. This work presents a study for the application of Reinforcement Learning (RL) tools in distributed generation systems. The objective of using RL is to address voltage perturbations in real time. RL will be useful to maximize the resilience of the system in the event of short circuits of a short duration and minimize the risk of disconnect., This article is supported by the ’Siemens Energy AI Chair: Energy Sustainability for a Decarbonized Society 5.0’ (TSI-100930-2023-5), funded by the SEDIA, and co-funded by the European Union-Next Generation EU, and by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/10.13039/501000011033 and FEDER., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A sliding mode control for a grid-connected three-phase voltage source inverter based on a new reference frame

  • Chico Villegas, José Pascual
  • Guzmán Solà, Ramon
  • García de Vicuña Muñoz de la Nava, José Luis
  • Miret Tomàs, Jaume
  • Castilla Fernández, Miguel
  • Borrell Sanz, Ángel
This paper presents a switching strategy for a grid-connected voltage source inverter (VSI) using sliding mode control (SMC). The conventional SMC suffers from sliding losses due to the cross-coupling among controllers by the neutral point voltage expression. This issue can be addressed by using the switching technique to obtain the voltage and currents in a new reference frame through a non-linear transformation. In this frame, a decoupled non-linear model of the VSI is derived, and two sliding mode controllers are designed using hysteresis band comparators. The switching strategy not only avoids sliding losses but also increases the control range of the converter by introducing a third harmonic by the control signal. Simulation results using Matlab Simulink are provided to validate the robustness of the proposed controller., This publication is part of the project I+D+i PID2021-122835OB-C21, f inanced by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Active-power voltage-support for a microgrid under short-circuits, modelled in complex valued domain

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
  • Chico Villegas, José Pascual
The growing number of electric vehicles (EVs) connected to the grid are a promising potential to support the overall system stability, known as vehicle to grid concept. During grid faults these vehicles can be seen as distributed dispatchable sources that can collaborate to the system restoration. In the case of islanded microgrids under a fault, electric vehicles can provide its stored energy in order to imitate the low voltage ride through protocols (LVRT) that are required to distributed generation systems connected to the main grid. The islanded microgrid tested here is composed of grid-forming voltage sources supplying different loads, some of them EVs. The proposal in this work is that, during a voltage sag caused by an overcurrent in the system, EVs must inject active power to support the voltage, instead of supplying reactive power as LVRT require. The theoretical reasoning of this new approach will be supported by a complete system modelling in the complex valued domain. Selected experimental results demonstrate the effectiveness of the control proposal., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Model predictive control for an LCL voltage source inverter with active damping capability and current limitation

  • Chico Villegas, José Pascual
  • Guzmán Solà, Ramon
  • García de Vicuña Muñoz de la Nava, José Luis
  • Miret Tomàs, Jaume
  • Castilla Fernández, Miguel
  • Komurcugil, Hasan
This paper presents a model predictive control (MPC) for a grid-connected voltage source inverter (VSI) with current limitation. The control algorithm is performed in the dq frame to obtain the amplitude of the inverter currents. First, a state observer with a reduced model of the converter is used to estimate the inverter current and perform active damping. Then, an MPC algorithm is used to regulate the currents to a desired reference but with the advantage that these currents can be limited to a maximum value by introducing a constraint in the cost function instead of clipping the current of the inverter above a maximum current. This controller has been tested experimentally under a current reference step change and without a physical damping resistor., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Agrixel. AI-based service standard for agricultural data in agri-food use cases

  • Eeckhout Alsinet, Joan van
  • Dimic, Miona
  • Angulo Bahón, Cecilio
We introduce a new interoperable geographic standard called agrixel, which employs a unique and innovative data processing methodology—similar to pixels in computer vision or tokens in language processing—leveraging computational power and machine learning in shared data spaces. Focused on AI-driven services for the agri-food sector and founded in a defined ontology, it offers a service portfolio for the sector itself, its externalities, and the circularity of its products. The agrixel standard ensures findable, accessible, interoperable, and reusable (FAIR) data, compatible with existing solutions. It supports multiple data layers, enabling extensions to externalities, such as carbon footprint, energy use, water management, logistics, and transport—enhancing efficiency in agri-food production and consumption., Joan van Eeckhout and Miona Dimic acknowledge the support of the Spanish Ministry for Digital Transformation and Public Service through the Secretariat of State for Digitalisation and Artificial Intelligence (project Agrixel ES, TSI-100121-2024-019) as part of the “Plan to Promote Sectoral Data Spaces” under the Recovery, Transformation and Resilience Plan, financed by the European Union – NextGenerationEU. Prof. Cecilio Angulo is also acknowledging co-funds from the European Union – NextGenerationEU, through the I+D+i PID2021-122835OBC21 research project ARTIFACTS (MCIN/AEI/10.13039/501000011033) and FEDER “Una manera de hacer Europa”., Peer Reviewed, 2 - Fam zero, 12 - Producció i Consum Responsables, 13 - Acció per al Clima, Postprint (published version)