Skip to main content

INTELIGENCIA EMBEBIDA EN SENSORES Y SISTEMAS DE VISION DE BAJO CONSUMO Y OPERACION DE LARGO TERMINO

PID2021-128009OB-C31

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Attention-driven PCM-based In-Memory Computing for Smart Vision Systems

  • Adnan Haidar, Amir Khan, Vasileios Ntinas, Jorge Fernández-Berni, Ricardo Carmona-Galán, Ronald Tetzlaff
This work is funded by BMBF via DAAD project 57616814 (SECAI, School of Embedded Composite AI), and by MCIN/AEI via project SEMIoTICS (PID2021-128009OB-C31), and also by DFG through project Mem2CNN (#441957207) of SPP MemrisTec (#2262). Additional funding is provided by the Ministry for Digital Transformation through grant USECHIP (TSI-069100-2023-001) of PERTE Chip, funded by the Next Generation-EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A Novel 10T SRAM Bit-Cell with High Static Noise Margin and Low Power Consumption for Binary In-Memory Computing

  • Khosravi, H.
  • Carmona-Galán, R.
  • Fernández-Berni, J.
  • Kandalaft, N.
In this paper, a novel 10T SRAM bit-cell with a high read/write static noise margin and low power dissipation is presented to be utilized in binary in-memory computing. The proposed SRAM bit-cell employs a conventional 6T SRAM along with four extra transistors to decouple read and write operation paths and improve the stability of the bit-cell. The two transistors M7 and M8 in the proposed structure act as switches to enable binary operation of the dot product in IMC mode. To conduct a comparative analysis, the various SRAM bit-cell designs were simulated using the Cadence design framework in the 65 nm technology. The proposed SRAM bit-cell not only presents a higher read stability value among the considered cells but also has a proper read delay value. The read noise margin of the proposed circuit is 1.91× as compared to a conventional 6T SRAM bit cell. Furthermore, the read energy of the proposed 10T SRAM has the lowest value of 28 fJ at a supply voltage of 1V compared to all the considered SRAM bit cells., R. Carmona-Galán and J. Fernández-Berni have been supported by Project PID2021-128009OB-C31 funded by MCIN/ AEI /10.13039/501100011033/ and ERDF, a way to make Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hardware-Efficient Random-Modulation ΣΔ ADC for Per-Column CS Generation in Vision Sensor

  • Khan, Amir
  • Fernández-Berni, J.
  • Carmona-Galán, R.
Compressive sensing (CS) encodes multiple projections of a signal. If the signal is an image, each projection is a linear combination of all pixels, which requires a high-resolution analog-to-digital converter (ADC). Σ Δ ADCs have been widely used to digitize compressed samples with practical resolution. In this study, we present the circuit-level implementation of a hardware-efficient random-modulation first-order incremental Σ ΔADC. This ADC can perform random modulation of input signals by ±1 while simultaneously quantizing and averaging the signals. The random modulation takes place directly at the decimation filter without requiring additional circuitry, in contrast to state-of-the-art works. The ADC has been designed for per-column CS realization in a vision sensor featuring a pixel pitch of 4 μm. However, the scheme is general and can be employed in any other relevant CS application. All circuits have been designed using a 110 nm CMOS image sensor technology., This work has been supported by Project SEMIOTICS (PID2021- 128009OB-C31), funded by MCIN/AEI /10.13039/501100011033 and EU “ERDF: A way of making Europe”, and by Grant PRE2019-088478, funded by MCIN/AEI /10.13039/501100011033 and EU “ESF: Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

An Analog-to-Information Architecture for Single-Chip Sensor-Processor Inference System

  • Khan, Amir
  • Fernández-Berni, J.
  • Carmona-Galán, R.
Compressed sensing (CS) establishes that signals fulfilling certain conditions can be sampled at a much lower rate than that defined by the Nyquist-Shannon sampling theorem while still keeping most information. Therefore, the monolithic implementation of CS is notably interesting for different applications. By its very nature, CS encodes global information of the sampled signal and hence compressed samples can be used for inference purposes. Thus, a particular application of CS is the implementation of inference in the compressed domain, i.e., without reconstructing the compressed signal. In this paper, we present an analog-to-information CS-based architecture for on-chip inference. The performance of the proposed architecture has been evaluated using facial recognition as a case study for different scenarios with varying lighting, expression, and occlusion conditions. Different mixed-signal hardware building blocks are also presented. These building blocks have been designed in the 110 nm LFoundry technology., This work has been supported by Project SEMIOTICS (PID2021- 128009OB-C31), funded by MCIN/AEI /10.13039/501100011033 and EU “ERDF: A way of making Europe”, and by Grant PRE2019-088478, funded by MCIN/AEI /10.13039/501100011033 and EU “ESF: Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Accurate Face Recognition on Highly Compressed Samples

  • Khan, Amir
  • Fernández-Berni, J.
  • Carmona-Galán, R.
Compressive sensing is an emerging field for low-dimensional data acquisition. Samples are acquired in the compressed domain and utilized for signal reconstruction or as input features for a classifier. In this work, hardware-aware face recognition using compressed samples was investigated. A linear support vector machine (SVM) classifier was exploited with compressed samples as input features; Faces can be reliably recognized with high average accuracy (up to 99%). To assess the robustness of the proposed scheme, three image datasets covering different facial and illumination conditions were analyzed. Random (binary) and structured (Haar-transform-based) measurement matrices were employed for generating compressed samples. For one of the datasets, Extended Yale B, and using a random binary measurement matrix, the proposed scheme achieved 82% accuracy from as few as 15 compressed samples, which means a 1/20480 sensing ratio. Accuracy and compression are also remarkably high with respect to the state-of-the-art for the other two datasets., This work has been supported by Project SEMIOTICS (PID2021- 128009OB-C31), funded by MCIN/AEI/10.13039/501100011033 and EU ”ERDF: A way of making Europe”, and by Grant PRE2019-088478, funded by MCIN/AEI/10.13039/501100011033 and EU ”ESF: Investing in your future”., Peer reviewed