Skip to main content

HERRAMIENTAS PARA LA OBSERVACION, INTERPRETACION Y MODELACION DE LA INTERACCION Y MOVIMIENTO MULTIFASICO EN MEDIO POROSO APLICADO A LAS INFRAESTRUCTURAS PARA LA ENERGIA Y LA M

PID2022-141429OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Gas transportbehaviourofbentonite/sandmixtures used insealingsystems

  • Mesa Alcantara, Arisleidy
  • Torres Serra, Joel|||0000-0002-2267-4570
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • De La Vaissiere, Remi
  • Talandier, Jean
Bentonite/sand brick mixtures installed at hygroscopic water content are currently considered for use in sealing systems for the deep and long-term disposal of radioactive wastes. The transport mechanisms of gas through bentonite/sand sealing materials at varying saturation levels represent a critical factor in the overall performance and integrity of the sealing system. Hence, several helium gas injection/dissipation tests were performed at constant total vertical stress or constant volume conditions at different dry densities and degrees of saturation of the mixture to understand the complex gas transport processes. The results provided the variation of the effective gas, The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Gas migration in low-permeability clay-based barriers

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
Gas migration in low-permeability materials has become a critical focus in energy and environmental geotechnics, particularly for managing the deep geological disposal of radioactive waste. Such waste can release radionuclides over hundreds of thousands of years, making it vital to understand the long-term processes occurring in repositories. Among these, significant gas volume generation, accumulation, and release are of great concern. While these processes vary depending on waste type and repository design, they must be addressed in all safety assessments. To this end, an experimental program was developed to investigate how excessive gas pressures induce damage in clay-rich geomaterials using materials from artificial (granular bentonite) and natural (argillaceous rock) barriers. Evidence suggests that gas preferentially flows through preferential pathways. Microstructural analyses conducted before and after gas injection provide insights into failure mechanisms, including the pore and fracture network geometric descriptors in intact and damaged materials. The self-sealing capacity of these materials was also evaluated using the same gas injection setup. A resaturation stage assesses water conductivity to quantify the potential loss of its hydraulic barrier function. These findings contribute to the safety case for repositories by improving our understanding of gas-induced damage and the resilience of engineered barriers., The authors acknowledge the financial support from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from the project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Modelling offshore cable-soil interaction during pull-in operations with the material point method (MPM)

  • Maglia Espinàs, Mateu
  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • Hoffmann Jauge, Christian Amadeo
In a context of climate emergency decarbonization of energy is one of the main goals at the global level, and renewable energies are growing in share to substitute energy traditionally coming from hydrocarbons. The offshore environment has traditionally been used by oil and gas extraction industry, and now the accumulated knowledge in this field can be transferred to renewable energies such as offshore wind power plants. Both industries need to transport the energy onshore by pipelines or cables that are usually laid on soil surface relying only on soil bearing capacity to withstand installation and service loads. The assessment of soil reaction to embedment and lateral pipe movement is a key aspect to correctly install and dimension these structures. Material remolding and deformation in cable installation and service can play an important role in soil reaction as occurs in unburied pipe-soil interaction problems. For that reason, including large deformation analysis can have some benefits over classical bearing capacity solutions or standard finite element method (FEM) analysis. In this study, the material point method (MPM) implemented in the open-source code Anura3D, able to simulate large deformations and soil-water-structure interaction, is selected to study pipe/cable-soil interaction. The contact formulation, based on a velocity predictor-corrector scheme is addressed and improved. The numerical approach and its developments are validated against an instrumented centrifuge experiment in which a rigid pipe interacts with saturated sandy soil. The results compared with a current industry procedure known as the “wished-in-place” (WIP) method. This method is based on standard FEM analysis and cannot simulate large deformations or account for material remolding; instead, the deformed geometry is imposed directly. This work shows that MPM is a powerful tool to address problems where large deformation plays an important role., The first author acknowledges the support of Secretariat for Universities and Research of the Generalitat de Catalunya. through the Joan Oró grant (ref. BDNS 657443). The second author thanks the financial support received from the Serra Húnter Program put forward by the Department of Enterprise and Knowledge of the Secretariat for Universities and Research of the Generalitat de Catalunya. The authors acknowledge the financial support of the project PDC2022-133222-I00 and PID2022-141429OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER and Union Europea NextGenerationEU/PRTR. The authors also acknowledge the support of Anura3D MPM Research Community., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Integrated characterisation of bentonite pellet structures for in situ test installation

  • Torres Serra, Joel|||0000-0002-2267-4570
  • Mesa Alcantara, Arisleidy
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
Bentonite pellet-based mixtures are currently investigated as candidate materials in large-scale in situ sealing experiments such as the Vertical SEALing project by the Institute for Radiological protection and Nuclear Safety (IRSN, France) due to their expected gap-filling capacity in engineered barrier systems for the geological disposal of radioactive waste. In the short term, after installation, the hydro-mechanical behaviour of these pellet-based structures is governed by pellet-pellet interactions, which have been characterised experimentally by oedometer compression tests and numerically by discrete-element modelling of single-layered pellet skeleton samples. In this work, we integrate these experimental and numerical tools to characterise the compressibility of three-layered pellet-based structures with axis-oriented arrangements. We validate the simulated deformation of bentonite pellet samples against experimental data and analyse the evolution of the dry density distribution and axial stiffness along the oedometer compression curve. Our integrated approach has implications for the emplacement and monitoring in situ tests on multi-layered pellet-based barrier systems., The authors are grateful for the financial support provided by IRSN (France) through different collaboration agreements with CIMNE (Spain) within the framework of the VSEAL project. The first and third authors also thank project PID2022-141429OB-I00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU and the Spanish Ministry of Universities, who awarded the first author the 2021UPC-MS-67340 ‘Margarita Salas ’ post-doctoral fellowship.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Exploring rate and temperature effects on residual strength. Review and implications for a landslide case study, Exploration des effets de la vitesse et de la température sur la résistance résiduelle. Examen et implications pour une étude de cas de glissement de terrain

  • Pinyol Puigmartí, Núria Mercè|||0000-0002-1878-1365
  • García Núñez, Luis Miguel
  • Lloret Morancho, Antonio|||0000-0001-7991-8487
  • Alvarado, Mauricio
A large landslide immediate to a reservoir, identified in 2006, is the guiding case to discuss its triggering, namely a consequence of fast reservoir drawdown, and its post-failure response. The reactivation of the landslide, twelve years later, allowed the validation of some hypotheses assumed in the first study (2012). The risk of landslide acceleration, for a constant residual friction and an assumed thermal pressurization of the sliding surface, was not realistic since the landslide never accelerated. In recent years, efforts have been addressed to gain further knowledge by developing advanced numerical tools and a better understanding of clay shear strength. The paper presents the developments achieved. The results of a comprehensive experimental program to investigate the effect of shear strain rate and temperature are presented for a variety of soil types. The expected landslide response under rapid drawdown conditions was simulated by a material point method-based numerical tool that handles, in a dynamic formulation, large displacements and soil /rock materials characterized by temperature, strain rate, and strain softening dependence. The risk of landslide acceleration, predicted in the 2012 analysis looks, at present, as a remote event., Acknowledge the support of Ministeri de Ciència i Innovació (MICIN), Agencia Estatal de Investigación (AEI) and el Fons Europeu de Desenvolupament Regional (FEDER) in the framework of the research project PID2022-141429OB-I00. The first author, Associate Professor Serra Húnter, gratefully acknowledges the funding from the Departament de Recerca and Universitats de la Generalitat de Catalunya.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Exploring the role of the granular skeleton on the swelling pressure of heavily compacted bentonite/sand mixtures

  • Torres Serra, Joel|||0000-0002-2267-4570
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Mesa Alcantara, Arisleidy
The contribution of the stiff sand skeleton in compacted bentonite/sand mixture hydration was investigated through experiments and numerical simulations. The final swelling pressure for various bentonite/sand proportions (40/60, 60/40, 100/0) was measured under constant volume and fully saturated conditions. Discrete element modelling was used to reproduce the confining effect of the sand skeleton in mixtures compared to granular bentonite at an equivalent dry density of the bentonite. A good agreement between model results and measurements will enable the identification of the main mechanisms, the roles played by the stiffness of the skeletal and filling components and their critical fractions, which will be relevant for the fabrication of high-density B/S bricks used in large-scale sealing experiments (e.g., the ‘Noyau de SCellement’ NSC Experiment, Bure, France)., The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura|||0000-0003-3800-3007
  • Romero Morales, Enrique Edgar|||0000-0002-4105-8941
  • Levasseur, Séverine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Integrated characterisation of bentonite pellet structures for in situ test installation

  • Torres Serra, Joel
  • Mesa Alcantara, Arisleidy
  • Romero Morales, Enrique Edgar
Bentonite pellet-based mixtures are currently investigated as candidate materials in large-scale in situ sealing experiments such as the Vertical SEALing project by the Institute for Radiological protection and Nuclear Safety (IRSN, France) due to their expected gap-filling capacity in engineered barrier systems for the geological disposal of radioactive waste. In the short term, after installation, the hydro-mechanical behaviour of these pellet-based structures is governed by pellet-pellet interactions, which have been characterised experimentally by oedometer compression tests and numerically by discrete-element modelling of single-layered pellet skeleton samples. In this work, we integrate these experimental and numerical tools to characterise the compressibility of three-layered pellet-based structures with axis-oriented arrangements. We validate the simulated deformation of bentonite pellet samples against experimental data and analyse the evolution of the dry density distribution and axial stiffness along the oedometer compression curve. Our integrated approach has implications for the emplacement and monitoring in situ tests on multi-layered pellet-based barrier systems., The authors are grateful for the financial support provided by IRSN (France) through different collaboration agreements with CIMNE (Spain) within the framework of the VSEAL project. The first and third authors also thank project PID2022-141429OB-I00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU and the Spanish Ministry of Universities, who awarded the first author the 2021UPC-MS-67340 ‘Margarita Salas ’ post-doctoral fellowship., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Gas transport and self-sealing in plastic materials within a multi-scale perspective

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
  • Levasseur, Séverine
This paper investigates, within a multi-scale perspective, the gas transport and self-sealing processes in plastic and low-permeability materials, which is crucial for managing deep geological disposal of radioactive waste. Laboratory gas injection tests revealed that, even at pressures lower than the minor principal stress, gas flowed through the material, inducing stress-dependant pathways that enhanced the gas permeability. However, self-sealing mechanisms, particularly clay mineral swelling during re-saturation, effectively restored the barrier function. Results suggest that despite gas invasion, water permeability post-re-saturation resembles initial levels. Microstructural techniques confirm the closure of fissures post-re-saturation, though some large pores remain. Multi-scale modelling integrating microstructural data with macroscopic properties provides insights into gas transport and self-sealing phenomena., This project has received funding from the ‘European Joint Programme on Radioactive Waste Management (EURAD)’ (2019-2024) WP-Gas ‘Mechanistic understanding of gas transport in clay materials’ under grant agreement No. 847593, from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from INTERMO2 project (PID2022-141429OB-I00) funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Exploring rate and temperature effects on residual strength. Review and implications for a landslide case study, Exploration des effets de la vitesse et de la température sur la résistance résiduelle. Examen et implications pour une étude de cas de glissement de terrain

  • Pinyol Puigmartí, Núria Mercè
  • García Núñez, Luis Miguel
  • Lloret Morancho, Antonio
  • Alvarado, Mauricio
A large landslide immediate to a reservoir, identified in 2006, is the guiding case to discuss its triggering, namely a consequence of fast reservoir drawdown, and its post-failure response. The reactivation of the landslide, twelve years later, allowed the validation of some hypotheses assumed in the first study (2012). The risk of landslide acceleration, for a constant residual friction and an assumed thermal pressurization of the sliding surface, was not realistic since the landslide never accelerated. In recent years, efforts have been addressed to gain further knowledge by developing advanced numerical tools and a better understanding of clay shear strength. The paper presents the developments achieved. The results of a comprehensive experimental program to investigate the effect of shear strain rate and temperature are presented for a variety of soil types. The expected landslide response under rapid drawdown conditions was simulated by a material point method-based numerical tool that handles, in a dynamic formulation, large displacements and soil /rock materials characterized by temperature, strain rate, and strain softening dependence. The risk of landslide acceleration, predicted in the 2012 analysis looks, at present, as a remote event., Acknowledge the support of Ministeri de Ciència i Innovació (MICIN), Agencia Estatal de Investigación (AEI) and el Fons Europeu de Desenvolupament Regional (FEDER) in the framework of the research project PID2022-141429OB-I00. The first author, Associate Professor Serra Húnter, gratefully acknowledges the funding from the Departament de Recerca and Universitats de la Generalitat de Catalunya., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Exploring the role of the granular skeleton on the swelling pressure of heavily compacted bentonite/sand mixtures

  • Torres Serra, Joel
  • Romero Morales, Enrique Edgar
  • Mesa Alcantara, Arisleidy
The contribution of the stiff sand skeleton in compacted bentonite/sand mixture hydration was investigated through experiments and numerical simulations. The final swelling pressure for various bentonite/sand proportions (40/60, 60/40, 100/0) was measured under constant volume and fully saturated conditions. Discrete element modelling was used to reproduce the confining effect of the sand skeleton in mixtures compared to granular bentonite at an equivalent dry density of the bentonite. A good agreement between model results and measurements will enable the identification of the main mechanisms, the roles played by the stiffness of the skeletal and filling components and their critical fractions, which will be relevant for the fabrication of high-density B/S bricks used in large-scale sealing experiments (e.g., the ‘Noyau de SCellement’ NSC Experiment, Bure, France)., The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Gas transportbehaviourofbentonite/sandmixtures used insealingsystems

  • Mesa Alcantara, Arisleidy
  • Torres Serra, Joel
  • Romero Morales, Enrique Edgar
  • De La Vaissiere, Remi
  • Talandier, Jean
Bentonite/sand brick mixtures installed at hygroscopic water content are currently considered for use in sealing systems for the deep and long-term disposal of radioactive wastes. The transport mechanisms of gas through bentonite/sand sealing materials at varying saturation levels represent a critical factor in the overall performance and integrity of the sealing system. Hence, several helium gas injection/dissipation tests were performed at constant total vertical stress or constant volume conditions at different dry densities and degrees of saturation of the mixture to understand the complex gas transport processes. The results provided the variation of the effective gas, The authors are grateful for the financial support provided by Andra through different collaboration agreements with CIMNE and UPC in the framework of the Cigéo project. The second and third authors also thank project PID2022-141429OB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Gas migration in low-permeability clay-based barriers

  • González Blanco, Laura
  • Romero Morales, Enrique Edgar
Gas migration in low-permeability materials has become a critical focus in energy and environmental geotechnics, particularly for managing the deep geological disposal of radioactive waste. Such waste can release radionuclides over hundreds of thousands of years, making it vital to understand the long-term processes occurring in repositories. Among these, significant gas volume generation, accumulation, and release are of great concern. While these processes vary depending on waste type and repository design, they must be addressed in all safety assessments. To this end, an experimental program was developed to investigate how excessive gas pressures induce damage in clay-rich geomaterials using materials from artificial (granular bentonite) and natural (argillaceous rock) barriers. Evidence suggests that gas preferentially flows through preferential pathways. Microstructural analyses conducted before and after gas injection provide insights into failure mechanisms, including the pore and fracture network geometric descriptors in intact and damaged materials. The self-sealing capacity of these materials was also evaluated using the same gas injection setup. A resaturation stage assesses water conductivity to quantify the potential loss of its hydraulic barrier function. These findings contribute to the safety case for repositories by improving our understanding of gas-induced damage and the resilience of engineered barriers., The authors acknowledge the financial support from ONDRAF/NIRAS under contract No. CCHO 2021-0377/00/00 (2021-2024) and from the project PID2022-141429OBI00, funded by the Spanish Ministry of Science/Research Agency MCIN/AEI/10.13039/501100011033/FEDER EU (2023-2027)., Postprint (published version)