Skip to main content

SENSORES DE FIBRA OPTICA BASADOS EN MATERIALES NANOESTRUCTURADOS

TEC2010-17805

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

SnO2 based optical fiber refractometers

  • Sánchez Zábal, Pedro
  • Ruiz Zamarreño, Carlos
  • Hernáez Sáenz de Zaitigui, Miguel
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These resonances shift to the red as a function of the external refractive index, enabling the fabrication of robust and highly reproducible wavelength-based optical fiber refractometers. The obtained SnO2-based refractometer shows an average sensitivity of 7198 nm/refractive index unit (RIU) in the range 1.333-1.420 RIU., This work was supported by the Spanish Ministry of Economy and Competitiveness-FEDER TEC2010-17805 and Government of Navarra research grants. Special thanks to FIDENA for the utilization of the SEM.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Fiber optic ammonia sensor using Bromocresol Green pH indicator

  • Rodríguez Rodríguez, Adolfo Josué
  • May Arrioja, Daniel A.
  • Domínguez Cruz, René
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
We report a fiber optic sensor for low levels of ammonia gas detection based on the use a Bromocresol Green (BCG) pH indicator attached to the optical fiber employing hydrophobic and gas permeable polyurethane film named Tecoflex® as attraping matrix. Highly reproducible and reversible fiber optical sensors have been achieved employing simple and short fabrication processes. The advantage for employ a BCG pH indicator is to take advantage of the basicity of ammonia exhibiting a wide spectral response (500 nm-750 nm) and shows recovery times of less than 15 s. The Tecoflex® film provides additional advantages to be measured to the sensitive area of the sensor, such as operation even in extremely dry environments, efficient transport and prevent leakage or detachment of the BCG pH indicator. The combination of the BCG pH indicator and Tecoflex® film provides a reliable and robust fiber optic ammonia gas sensor., We appreciate the support from the Consejo Nacional de Ciencia y Tecnología (CONACyT) under contract CB-2010/157866. This work was also supported by the Spanish Economy and Competitivity Ministry-FEDER TEC2010-17805
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

D-shape optical fiber refractometer based on TM and TE lossy mode resonances

  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
The fabrication and characterization of an optical fiber refractometer based on Lossy Mode Resonances (LMR) is presented. TiO2/ poly (sodium 4-styrenesulfonate) coatings deposited on side-polished D-shaped optical fibers are used as LMR supporting coatings. LMRs are sensitive to the external medium refractive index and D-shaped optical fibers enable the observation of TE and TM LMR polarizations. These refractometers based on TE and TM LMR showed an average sensitivity of 2737 nm/RIU and 2893 nm/RIU respectively for a surrounding medium refractive index (SMRI) range from 1.35 to 1.41., This work was supported by the Spanish Economy and Competitiveness Ministry-Feder TEC2010-17805 Research Grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Optical fiber refractometers based on indium tin oxide coatings with response in the visible spectral region

  • Ruiz Zamarreño, Carlos
  • López, S.
  • Hernáez Sáenz de Zaitigui, Miguel
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
This work presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings with response in the visible spectral region. ITO thin-films have been sputtered by employing a rotating mechanism that enables the fabrication of smooth homogeneous coatings onto the optical fiber core. The ITO coated optical fiber devices present several resonances in the visible and infra-red region. These resonances show high optical power attenuations (more than 10 dB) in the visible spectral region, which produces changes in the colour of the output visible light. Therefore, since these resonances shift as a function of the surrounding medium refractive index (SMRI), it is feasible to determine the refractive index of the outer medium in contact with the ITO coating by simply monitoring the chromatic coordinates of the visible output light., This work was supported in part by the Spanish Ministry of Education and Science-FEDER TEC2010-17805 and Government of Navarra research grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Fiber-optic lossy mode resonance sensors

  • Arregui San Martín, Francisco Javier
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Goicoechea Fernández, Javier
  • Ruiz Zamarreño, Carlos
  • Elosúa Aguado, César
  • Hernáez Sáenz de Zaitigui, Miguel
  • Rivero Fuente, Pedro J.
  • Socorro Leránoz, Abián Bentor
  • Urrutia Azcona, Aitor
  • Sánchez Zábal, Pedro
  • Zubiate Orzanco, Pablo
  • López Torres, Diego
  • Acha Morrás, Nerea de
  • Matías Maestro, Ignacio
Trabajo presentado a EUROSENSORS 2014, celebrado en Italia del 7 al 10 de septiembre de 2014., In the last 4 years, experimental evidences about the potential use of optical sensors based on Lossy Mode Resonances (LMR) have been presented in the literature. These LMR sensors have some similarities with Surface Plasmon Resonance (SPR) sensors, the gold standard in label-free, real-time biomolecular interaction analysis. In these new LMR sensors, if the non-metallic nanocladding of an optical waveguide fulfills the conditions explained in this work, coupling of light to the cladding modes happens at certain resonance wavelengths, which enables the use of LMR devices as refractometers and opens the door to diverse applications such as in biology and proteomics research. These highly sensitive refractometers have already shown sensitivities higher than 20,000 nm/RIU or 5x10-7 RIU and, given the youth of this field, it is expected to achieve even better values., This work was supported by the Spanish Ministry of Economy and Competitiveness-FEDER TEC2010-17805 and Government of Navarra research grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Optical fiber refractometers based on sputtered indium tin oxide coatings

  • López, S.
  • Ruiz Zamarreño, Carlos
  • Hernáez Sáenz de Zaitigui, Miguel
  • Del Villar, Ignacio
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
This work presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings deposited by sputtering with response in the visible spectral region. ITO thin-films have been sputtered by employing a rotating mechanism that enables the fabrication of smooth and homogeneous coatings onto the optical fiber core. Fabricated ITO coated optical fiber devices present several resonances in the visible and near infrared region. These resonances show high optical power attenuations (more than 10 dB) in the visible spectral region, which produces changes in the colour of the output visible light. Therefore, since these resonances shift as a function of the refractive index (RI) of the surrounding medium it is feasible to determine the RI of the outer medium in contact with the ITO coating by simply monitoring the chromatic coordinates (colour change), x and y, of the visible output light, This work was supported by the Spanish Ministry of Science and Innovation TEC2010-17805.