Skip to main content

SENSORES FOTONICOS BASADOS EN NANOPARTICULAS, NANOFIBRAS Y MATERIALES NANOESTRUCTURADOS

TEC2013-43679-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Lossy mode resonances biosensor for the detection of C-reactive protein

  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
  • Sánchez Zábal, Pedro
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
The fabrication and characterization of optical fiber biosensor based on Lossy Mode Resonances (LMR) to detect C-reactive protein (CRP) are presented. Indium tin oxide (ITO) coatings deposited on side-polished D-shaped optical fibers are used as LMR supporting coatings. The aptamer was immobilized on the ITO film using the Layer-by-Layer (LbL) nano-assembly process. The optical fiber sensor presented shows a high selectivity and low limit detection., This work was supported by a Pre-Doctoral Research Grant of the Public University of Navarra, Spanish Economy and Competitiveness Ministry-Feder TEC2013-43679-R and Fundación CAN2015-70221 Research Grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

D-shape optical fiber pH sensor based on lossy mode resonances (LMRs)

  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
The fabrication and characterization of an optical fiber pH sensor based on Lossy Mode Resonances (LMRs) is presented. PAH/PAA polymeric thin-films fabricated onto side-polished D-shaped optical fibers are used as LMR supporting coatings. The thickness of PAH/PAA coatings can be modified as a function of the external medium pH. As a consequence of this variation, the effective refractive index of the structure will change, producing a shift of the LMR. The fabricated sensor has been used to measure pH from 4.0 to 5.0. This pH sensor showed a sensitivity of 101.3 nm per pH unit, which means a resolution of ~6×10-4 pH units by using a conventional communications Optical Spectrum Analyzer (OSA), which is an improvement over commercial pH sensors., This work was supported by the Spanish Economy and Competitiveness Ministry-Feder TEC2013-43679-R Research Grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

SnO2-MOF-Fabry-Pérot humidity optical sensor system based on Fast Fourier transform technique

  • López Aldaba, Aitor
  • López Torres, Diego
  • Ascorbe Muruzabal, Joaquín
  • Rota Rodrigo, Sergio
  • Elosúa Aguado, César
  • López-Amo Sáinz, Manuel
  • Arregui San Martín, Francisco Javier
  • Corres Sanz, Jesús María
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
In this paper, a new sensor system for relative humidity measurements based on a SnO2 sputtering deposition on a microstructured optical fiber (MOF) low-finesse Fabry-Pérot (FP) sensing head is presented and characterized. The interrogation of the sensing head is carried out by monitoring the Fast Fourier Transform phase variations of the FP interference frequency. This method is low-sensitive to signal amplitude variations and also avoids the necessity of tracking the evolution of peaks and valleys in the spectrum. The sensor is operated within a wide humidity range (20%-90% relative humidity) with a maximum sensitivity achieved of 0.14rad/%. The measurement method uses a commercial optical interrogator as the only active element, this compact solution allows real time analysis of the data., We also thank the Spanish Government projects TEC 2013-47264-C2-2-R, TEC2013-43679-R Innocampus and the INTERREG SUDOE Project SOE3/P2/P714 as well as to the FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

A comparative study between SMS interferometers and lossy mode resonace optical fiber devices for sensing applications

  • Socorro Leránoz, Abián Bentor
  • Hernáez Sáenz de Zaitigui, Miguel
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
Optical fiber sensors are of great interest due to their intrinsic advantages over electronic sensors. In this work, the sensing characteristics of two different and novel optical fiber devices are compared, after simultaneously depositing a thin-film using the layer-by-layer assembly deposition process. The first one is an SMS structure, formed by splicing two single-mode fiber pigtails on both sides of a coreless multimode fiber segment. This structure induces an interferometric phenomenon that generates several attenuation and transmission bands along the spectrum. These bands are sensitive to variations in the surrounding refractive index, although this sensitivity has been enhanced by a TiO2/PSS thin-film. The other device is a 40 mm uncladded segment of a 200 µm-core multimode optical fiber. When coated by a TiO2/PSS thinfilm, part of the light transmitted into the uncladded core is coupled into the thin-film, generating a lossy mode resonance (LMR). The absorption peaks due to these phenomena red-shift as long as the thin-film thickness increases or the external RI becomes higher. The performance of these devices as refractometers and relative humidity sensors are tested. Results show that the LMR-based sensor is more sensitive in both situations, in spite of its lower sensitivity. Particularly, it presents a 7-fold sensitivity enhancement when measuring surrounding medium refractive index changes and a 10-fold sensitivity enhancement when measuring environmental relative humidity. To our knowledge, this is the first time that a comparative study between SMS and LMR sensors is performed., This work was supported by the Spanish Economy and Competitiveness Ministry project FEDER TEC2013-43679-R and by a Public University of Navarra pre-doctoral research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Nanocoated optical fibre for lossy mode resonance (LMR) sensors and filters

  • Del Villar, Ignacio
  • Arregui San Martín, Francisco Javier
  • Corres Sanz, Jesús María
  • Bariáin Aisa, Cándido
  • Goicoechea Fernández, Javier
  • Ruiz Zamarreño, Carlos
  • Elosúa Aguado, César
  • Hernáez Sáenz de Zaitigui, Miguel
  • Rivero Fuente, Pedro J.
  • Socorro Leránoz, Abián Bentor
  • Urrutia Azcona, Aitor
  • Sánchez Zábal, Pedro
  • Zubiate Orzanco, Pablo
  • López Torres, Diego
  • Acha Morrás, Nerea de
  • Ascorbe Muruzabal, Joaquín
  • Matías Maestro, Ignacio
Nanometer scale coatings with a complex refractive index deposited on optical fibre permit to obtain attenuation bands in the transmission spectrum, whose central wavelength coincides with the moment when a mode guided in the optical fibre cladding starts to be guided in the coating. Due to the complex refractive index of the coating, the guided mode is a lossy mode. Consequently, these attenuation bands receive the name of lossy mode resonances. This phenomenon can be used for development of ultra-high sensitivity photonic devices (for detection, among others, of volatile organic compounds, pH and refractive index) or for optical filtering. In this work, rules for adequate design are indicated based on numerical results obtained with FIMMWAVE and on experimental results that corroborate the theoretical predictions., This work was supported in part by the Spanish Ministry of Education and Science-FEDER TEC2013-43679-R.