Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Evaluation of Spread-Spectrum Sequences in Ultrasonic Sonar for Indoor People Localization

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Wright, William M. D.
  • Murano, Santiago Emmanuel Francis
2024 IEEE International Symposium on Medical Measurements and Applications (MeMeA), 26-28 June 2024, Eindhoven, Netherlands., Device-free localization (DFL) systems enable non-intrusive indoor human location without the need to wear a sensor or tag. This can be particularly helpful in healthcare and assisted living applications based on monitoring vulnerable people to improve their quality of life in their own home. For this purpose, this work presents a DFL system based on an ultrasonic asynchronous multistatic sonar, installed on the ceiling, consisting of four transmitters and a receiver that estimates the 3D position of a person's head. The emitted signals propagated through the indoor space are acquired by the receiver, which processes them by means of different proposed methods to estimate the position. Each transmitter emits spread-spectrum signal pulses with good cross-correlation properties, providing an update time of 300 ms and asynchronous operation. Kasami, Zadoff-Chu and orthogonal chirp emission sequences are analyzed by simulation and experimental results. Hence, it can be determined that Zadoff-Chu and chirp stand out due to their performance in terms of Doppler tolerance and accuracy, reaching mean absolute errors of 4.5 cm and 3.5 cm with standard deviations of 0.6 cm and 2 cm, respectively. On the other hand, Zadoff-Chu offers better correlation properties, while chirp provides higher data availability due to its better transducer adaptation., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Preliminary Unknown Appliance Detection using Convolutional Variational Auto-Encoders for AAL

  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Fuentes Jiménez, David|||0000-0001-6424-4782
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Mari, Simone
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2024 IEEE International Conference on Omni-layer Intelligent Systems (COINS), 29-31 July 2024, London, United Kingdom., The healthcare landscape is evolving, emphasising the importance of Active Assisted Living in addressing challenges presented by the ageing population. Integrating Non-Intrusive Load Monitoring provides insights into individual appliance usage patterns without additional sensors, enabling the detection of changes in daily activities that may reflect a person's health status. Within the effectiveness of this approach, adaptability is crucial as households evolve, discerning variations in energy consumption patterns caused by new or replaced electrical devices. For this reason, this work introduces a sophisticated hybrid approach combining deep learning and classic machine learning to classify household electrical loads and detect unknown loads using high-frequency electrical current signal data. Finally, while experimental results highlight areas for improvement, the findings suggest promising applications in household settings, marking a step forward in facing hurdles within the AAL context., Agencia Estatal de investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

An encoder-decoder LSTM network for load forecasting in building power systems

  • Mari, Simone
  • Donato, Patricio
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Fiorucci, Edouardo
2025 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 19-22 May 2025, Chemnitz, Germany., Intelligent energy management systems have become a trending topic in the last decade, due to those challenges associated to climate change or energy shortages, among others. Efficient energy management and energy demand response are often related to the availability of accurate prediction models that may provide the expected energy consumption for a household or building early enough. For that purpose, deep learning and deep neural networks are already a suitable approach to deal with large datasets from a building energy consumption, thus making it feasible the definition and training of data-driven models. In this context, this work describes a novel encoder-decoder network based on LSTM (Long Short-Term Memory) layers that is capable of forecasting the weekly energy consumption of a public building, starting from the actual energy values from the previous week as well as from the information about the work days in that week. The proposal has been successfully validated in the School of Engineering from the National University of Mar Del Plata (Argentina), achieving a mean absolute error of 2.68 kW in the prediction of the active power of the building during a test period of eleven weeks., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

SoC Architecture for High-Frequency Acquisition of Household Electric Signals

  • Navarro Pérez, Víctor Manuel
  • Diego Otón, Laura de|||0000-0002-4939-2987
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Tapiador Luque, Miguel
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2024), 20-23 May 2024, Glasgow, United Kingdom., Accurate monitoring of current and voltage in residential power grids is crucial for effective energy manage-ment and the implementation of smart technologies for non-intrusive monitoring of persons, especially those with cognitive or physical impairments. The emergence of high-speed analog-digital converters (ADCs) and wireless Internet-of-Things (IoT) devices has significantly improved measurement rates and realtime data collection capabilities, but the acquisition rates for the correct recognition of some devices in a non-intrusive load monitoring (NILM) aplication might still be insufficient. In order to address this issue, this work describes a System-on-Chip (SoC) architecture based on a Field-Programmable Gate Array (FPGA) and a dedicated analog conditioning circuit for household elec-tric signal acquisition. The architecture simultaneously captures voltage with a bandwidth ranging from 500 Hz to 100 kHz; and current signals from 300 Hz to 100 kHz. It is based on a Zybo z7-10 development platform along with an AD7476A ADC and a conditioning circuit, which consist of a filtering stage, an isolation transformer and a voltage-level adapter. The system is adequate for realtime household electric signal acquisition and processing, being able to capture high frequency harmonics correctly, while enabling the possible implementation of further processing, such as the integration of artificial neural networks and/or machine learning algorithms for event classification, load identification, and the implementation of an alarm system for behaviour anomalies., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Conditioning stage of a QADA receiver for a large range IR positioning system

  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • García García, Juan Carlos|||0000-0002-9367-9475
2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2024), 20-23 May 2024, Glasgow, United Kingdom., Optical positioning systems in the infrared or visible spectrum find application in the tracking of people or mobile vehicles in indoor spaces. A line of research proposes the use of LED emitters, acting as tags to be positioned, and quadrant receivers (QADA, Quadrant Photodiode Angular Diversity Aperture) located at known positions in the infrastructure. These systems can operate at a measurement rate that can reach some MHz at relatively low cost. Apart from the challenge of high-speed processing, they must also deal with low and changing signal-to-noise ratios (measurements at short and long distances, with different transmitter-receiver angle of view, etc.). This paper deals with the design of the analog conditioning stage of a QADA receiver taking into account that it must operate in a linear area with large dynamic signal margins and provide three outputs, one sum signal and two differential signals, that must be amplified with identical gain, as the performance of the triangulation algorithms used in positioning depends on this. Each signal has a transimpedance amplifier with continuous and low-frequency backlight cancellation. Furthermore, an automatic gain control with a large dynamic range is applied to the sum signal and the gain derived over time is used to manage two variable gain amplifiers for the other two differential signals. Some results are presented that show the performance of the system., Universidad de Alcalá, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Appliance Identification in NILM Applications by means of a Convolutional Auto-Encoder

  • Diego Otón, Laura de|||0000-0002-4939-2987
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 IEEE International Workshop on Metrology for Living Environment (MetroLivEnv), 29-31 May 2023, Milano, Italy., In energy efficiency applications, Non-Intrusive Load Monitoring techniques (NILM) are typically used to deduce which electrical loads are being used in a building at a given time. The identification of household appliances, in particular manually operated ones, is relevant information that can also be applied to infer the routines of tenants in Active and Assisted Living environments (AAL). These tools and applications are becoming increasingly interesting, especially in Western countries, where the ageing population is putting a strain on public social and health services. In this context, this work aims to classify the on/off events of the devices considered in the BLUED database. For this purpose, an architecture is presented, consisting of a Convolutional Auto-Encoder (CAE) followed by a classifier neural network. The CAE is used to implement a dimensionality reduction process after the encoder. Input data are formatted as images, created with extracted sections of the high-frequency electric current signal captured around the switching events. It is noteworthy that this dimensionality reduction also allows a decrease in the computational load of the classifier. Regarding the CAE functionality, the reconstruction error reaches a value of 1.579 · 10−3, whereas in the validation stage a weighted average classification F1-score of 87 % is obtained for the whole architecture., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

An Open-Source VLBI Digital Backend for Low-Cost FPGA-based SoCs

  • Cubero Vacas, Miguel
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • González, Javier
DCIS2024: 39th Conference on Design of Circuits and Integrated Systems. Catania, Italy, November 13-15, 2024., Very Long Baseline Interferometry (VLBI) techniques have become crucial in radio astronomy and geodesy due to the major improvements that they provide to the observations, outcomes, at the expense of requiring a significant computational load to implement the corresponding processing in real time. The devices responsible for these digital signal processing tasks in the application field, mainly based on Field-Programmable Gate Arrays (FPGAs), are known as Digital Backends. Currently, the costs coming from the state-of-the-art digital backends are high and their FPGA designs either require expensive software licenses to be involved, or they are released as proprietary solutions. This work proposes a novel SoC (System-on-Chip) architecture, based on a Xilinx Zynq device, for a digital backend focused on VLBI applications. The architecture is capable of managing the acquisition stage at the required data rates, and packing data in the well-known VDIF format to upload them. By offering a low-cost open-source architecture, it becomes a suitable solution for dissemination purposes, as well as for specific research fields. Furthermore, the system has been successfully validated with its implementation and test in some preliminary experimental setups., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

A configurable CORDIC and PSADIC fusion architecture for nonlinear edge-computing

  • Xie, M.
  • Yu, Ningmei
  • Tian, Dian
  • Zhang, J.
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
2024 9th International Conference on Integrated Circuits and Microsystems (ICICM), 25-27 October 2024, Wuhan, China., The computation of some crucial and nonlinear functions on the edge has to consider the area and latency. The traditional coordinate rotation digital computer (CORDIC) systems are widely used for these key functions, such as the sine, cosine, or the square root. For the co-calculations of the division and the square root, CORDIC requires more iteration cycles and resources, whereas the power series approximate digital computer (PSADIC) approach can half the iteration cycles. In this context, a configurable CORDIC and PSADIC fusion architecture is proposed here for edge-computing. It integrates five modes of CORDIC and PSADIC to calculate some crucial nonlinear functions. Each mode is simulated and verified on software and hardware, achieving the mean relative error distance (MRED) lower than 10−4. Under the TSMC 40nm process, the area of proposed architecture is increased by 18.3% compared to the PSADIC one, but the five modes, including all the calculations from CORDIC and PSADIC, are implemented., Agencia Estatal de Investigación