Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Fine-Scale ocean currents from integrated multi-platform experiments and numerical simulations: contribution to the new SWOT satellite mission. Cruise Plan (FaSt-SWOT, PID2021-122417NB-I00)

  • Pascual, Ananda
  • Mourre, Baptiste
  • Balaguer, Pau
  • Barceló-Llull, Bàrbara
  • Calafat, Noemí
  • Casas, Benjamín
  • Combes, Vincent
  • Cutolo, Eugenio
  • Díaz-Barroso, Lara
  • Fernández, Juan Gabriel
  • Gomez-Navarro, Laura
  • Juzà, Melanie
  • Lizarán, Irene
  • Miralles, Albert
  • Reyes, Emma
  • Rivera, Patricia
  • Rodríguez-Tarry, Daniel
  • Roselló, Pere
  • Rubio, Manuel
  • Sánchez-Román, Antonio
  • Tintoré, Joaquín
  • Verger-Miralles, Elisabet
  • Villoria, Juan Miguel
  • Wirth, Niko
  • Zarokanellos, Nikolaos
Surface Water & Ocean Topography (SWOT) is the first satellite altimetry mission to measure the elevation of nearly all water on Earth’s surface. SWOT will provide high-resolution maps of the water surface topography over the open and coastal oceans, lakes rivers and reservoirs. After two decades of preparation , SWOT was launched on December 2022. For approximately the first 180 days of the mission, SWOT is in a 1-day repeat orbit for cal/val. This document represents the cruise plan of the FaSt-SWOT field campaigns co-led by IMEDEA(CSIC-UIB) and SOCIB as a contribution to the SWOT Science Team and SWOT-AdAC consortium. FaSt-SWOT multi-platform experiments took place in the Balearic Sea in April-May 2023 during the SWOT satellite mission fast-sampling phase. The generals objectives of these experiments were (1) to validate the first observations provided by the new altimeter mission during the calibration/validation phase and (2) to improve the characterization of oceanic fine scales through the combined use of in-situ multi-platform and satellite data in synergy with numerical models and innovative computational techniques. The campaigns have assessed the actual capability to map SSH variability over a range of scales (30-100 km) traditionally not resolved by conventional altimeters. A unique aspect of the FaSt-SWOT experiments is the combination of concurrent multi-scale ship-based instruments, autonomous platforms, and satellite observations with ad hoc modeling simulations, enabling the evaluation of underlying mechanisms. FaSt-SWOT federates two multiplatform in situ experiments, combining glider, drifter, ship observations together with satellite observations and high-resolution data-assimilative numerical simulations. Advanced Observing System Simulation Experiments (OSSEs) and new tools of artificial intelligence have been performed to optimize the sampling strategies. This document includes the plans for the cruises and it will be complemented with the cruise reports., The FaSt-SWOT project is funded by the Spanish Research Agency and the European Regional Development Fund (AEI/FEDER, UE) under Grant Agreement (PID2021-122417NB-I00). The present research is conducted within the framework of the activities of the Spanish Government through the "María de Maeztu Centre of Excellence'' accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). The Spanish Ministry of Science and Innovation, the Regional Government of the Balearic Islands and the Spanish Research Council (CSIC) are acknowledged for their support to the ICTS SOCIB. A. P., B. M. and B. B. L. thank the European Union funding through the EuroSea project an Horizon 2020 research and innovation programme under grant agreement No 862626., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Codes generated to evaluate in situ sampling strategies to reconstruct fine-scale ocean currents in the context of SWOT satellite mission (H2020 EuroSea project)

  • Barceló-Llull, Bàrbara
[Codes generated in Subtask 2.3.1 of the H2020 EuroSea project] H2020 EuroSea project: The H2020 EuroSea project aims at improving and integrating the European Ocean Observing and Forecasting System (see official website: https://eurosea.eu/). It has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 862626). Task 2.3: Task 2.3 has the objective to improve the design of multi-platform experiments aimed to validate the Surface Water and Ocean Topography (SWOT) satellite observations with the goal to optimize the utility of these observing platforms. Observing System Simulation Experiments (OSSEs) have been conducted to evaluate different configurations of the in situ observing system, including rosette and underway CTD, gliders, conventional satellite nadir altimetry and velocities from drifters. High-resolution models have been used to simulate the observations and to represent the “ocean truth”. Several methods of reconstruction have been tested: spatio-temporal optimal interpolation, machine-learning techniques, model data assimilation and the MIOST tool. The planned OSSEs are detailed in this public report Barceló-Llull et al. (2020) and the complete analysis is available here Barceló-Llull et al. (2022). Contributors to Task 2.3 are CSIC (Spain), CLS (France), SOCIB (Spain), IMT-Atlantique (France) and Ocean-Next (France). Subtask 2.3.1: Subtask 2.3.1 aims to evaluate different in situ sampling strategies to reconstruct fine-scale ocean currents (~20 km) in the context of SWOT. An advanced version of the classic optimal interpolation used in field experiments, which considers the spatial and temporal variability of the observations, has been applied to reconstruct different configurations with the objective to evaluate the best sampling strategy to validate SWOT. Where? The analysis focuses on two regions of interest: (i) the western Mediterranean Sea and (ii) the Subpolar North West Atlantic. In the western Mediterranean Sea, the target area is located within a swath of SWOT, while in the North West Atlantic the region of study includes a crossover of SWOT during the fast-sampling phase. [Report with the full analysis] The complete analysis can be found in this report: Barceló-Llull et al. (2022)., Codes The codes are organized into 3 folders: 1_simulate_observations 2_reconstruct_observations_spatiotemporal_OI 3_evaluation Here there is a step-by-step description with the corresponding codes. 1_simulate_observations Objective: Simulate CTD observations from different platforms (rosette, underway CTD, gliders) and ADCP observations to evaluate different in situ sampling strategies (1) Step00a_interpolate_eNATL60_4D_outputs.py Interpolate eNATL60 model outputs onto a regular grid with a horizontal resolution of 1/60º for each time step and at each depth layer. Before starting the interpolation, we mask the 0 unreal values in the original data to exclude them from the interpolation. Then, we save the interpolated model data in a netcdf file for each variable (T, S, U and V), for each region (Atlantic or Mediterranean) and for each period (January or September). We use the interpolated data to extract the corresponding pseudo-observations in Step 2. NOTE: U and V are not zonal and meridional velocities. They are velocities along the original x and y axis. Then, if the objective is to extract ADCP velocity, they need to be rotated. (2) Define sampling strategies: Step01_define_sampling_strategy_CTD_ADCP.py Define sampling strategy with rosette CTD: get (time, lon, lat, dep) of each cast. Valid for reference configuration and configurations 1, 2 and 4. MedSea and Atlantic. Step01_define_sampling_strategy_gliders.py Define sampling strategy with gliders: get (time, lon, lat, dep) of each profile. Valid for configuration 5. MedSea and Atlantic. Step01_define_sampling_strategy_uCTD.py Define sampling strategy with underway CTD: get (time, lon, lat, dep) of each profile. Valid for configuration 3. MedSea and Atlantic. (3) Step02_extract_pseudo-obs_from_models.py Extract pseudo-observations of temperature, salinity and ADCP horizontal velocities. (4) Step03_plot_pseudo-obs.py Plot pseudo-observations. (5) Step31_simulate_pseudo-obs_error.py Simulate random error for CTD and ADCP pseudo-observations, following a Gaussian distribution with a standard deviation defined by the instrumental error. Different (uncorrelated) for each observations. Following Gasparin et al., 2019. Toolbox: EuroSea_toolbox.py 2_reconstruct_observations_spatiotemporal_OI Objective: Reconstruct observations with the spatio-temporal optimal interpolation (1) Step05b_spatio-temporal_optimal_interpolation_T_and_S.py Reconstruct pseudo-observations of T and S applying linear interpolation on the vertical and the spatio-temporal optimal interpolation horizontally. For all configurations, in the Atlantic and Mediterranean, for all models. For T and S: noise-to-signal error 3%, Lx = Ly = 20 km, Lt = 10 days. Not done for U and V but the code is ready. Time of the resulting OI map: central date of each configuration. (2) Step07b_calculate_dh_vgeo_spatio-temporal_OI.py From the reconstructed T and S 3D fields: compute DH, (ug, vg), and Rog. For all configurations, in the Atlantic and Mediterranean, for all models. (3) Step08b_figures_to_check_reconstructed_fields_spatio-temporal_OI.py Plot figures to check reconstructed fields with the spatio-temporal OI. Plot for each configuration: T (with observations) + S (with observations) + dh+vgeo Toolboxes: EuroSea_toolbox.py, deriv_tools.py, Tools_OI.py 3_evaluation Objective: Compare reconstructed fields to the ocean truth and find the best sampling strategies (1) Step00b_interpolate_eNATL60_2D_outputs.py Interpolate eNATL60 2D (surface) fields onto a regular grid. (1) Step09b_extract_reconstructed_data_for_comparison_spatio-temporal_OI.py Extract reconstructed data at the upper layer to do comparisons in Step 12. Save data with the same format as the ocean truth .pkl file. (2) Step09c_figures_reconstructed_fields_all_spatio-temporal_OI.py Reconstructed fields: Plot 1 figure for each region, model and variable, including all configurations. Variables: dh, geostrophic velocity magnitude and geostrophic Ro. For comparison between configurations and with the ocean truth. [Figures published in D2.3] (3) Step10b_extract_model_data_for_figures_spatio-temporal_OI.py Extract 2D model data (ocean truth) within the configuration domain and linearly interpolate model fields to the time of the OI map. Save fields. (4) Step11b_figures_model_SSH_speed_Ro_spatio-temporal_OI.py Ocean truth: Plot 1 figure for each region, model and variable, including all configurations. Variables: SSH, total horizontal velocity magnitude (speed) and Ro computed from total horizontal velocity. For comparison with reconstructed fields. [Figures published in D2.3] (5) Step10c_extract_model_data_for_comparison_spatio-temporal_OI_bigger_domain.py Extract 2D model data within a domain bigger than the corresponding configuration and linearly interpolate model fields to the time of the OI map. Save fields, to be used in Step12f. (6) Step12f_compute_statistics_spatio-temporal_OI_limit_domain.py This codes does: Open reconstructed and model fields (saved in a bigger domain than the corresponding configuration in Step10c). Interpolate model fields (ssh, ut, vt, speed, Ro) onto the reconstruction grid. Limit model and reconstructed data within the configuration 2a domain. Compute DH anomaly and SSH anomaly. Spatial average over configuration 2a domain. Calculate RMSE-based score between reconstructed and model fields. https://github.com/ocean-data-challenges/2020a_SSH_mapping_NATL60/blob/master/notebooks/example_data_eval.ipynb Save RMSE-based score in a .pkl file for each field. Plot table and figure of the RMSE-based score. (Only plot figures for DH and geostrophic velocity magnitude.) (7) Step13a_comparison_statistics_spatio-temporal_OI_best_configurations_ranking_all.py Leaderboard based on the RMSEs calculated in Step12f for the Mediterranean and Atlantic [D2.3]. Toolboxes: EuroSea_toolbox.py, deriv_tools.py, EuroSea – Improving and Integrating European Ocean Observing and Forecasting Systems for Sustainable use of the Oceans 862626., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Sargassum White Paper : Addressing the influxes of the holopelagic Sargassum spp. in the tropical and subtropical Atlantic: Recent scientific insights in their dynamics

  • Cox, Shelly-Ann
  • Speede, Richéda
  • Alleyne, Kristie
  • Oxenford, Hazel A.
  • Tussenbroek, Brigitta I. van
  • Lapointe, Brian
  • Berdalet, Elisa
  • Kershaw, Peter
  • Baker, Alex R.
  • Enevoldsen, Henrik
61 pages, 13 figures, 4 tables, appendixes, For over a decade, countries and territories in the Gulf of Mexico, South Florida, Wider Caribbean and West Africa have experienced an unprecedented Transatlantic Triple Threat, the influxes of holopelagic Sargassum spp., resulting in significant social, economic and environmental impacts. These impacts have caused challenges to already strained climate-sensitive socio-economic and environmental sectors. Emerging impacts recently reported in the energy and water sectors further highlight the need for adaptive management strategies to address this triple threat. The magnitude and complexity of the Sargassum issue has inspired scientists to investigate many aspects associated with this phenomenon, including the source and causes of bloom events. There has been considerable debate about the root cause(s) of unprecedented Sargassum spp. influx events, but it is generally agreed that the post-2011 Sargassum phenomenon in the tropical Atlantic can be considered a ‘wicked problem’. A wicked problem can be defined as a social or cultural problem that is difficult or impossible to solve because of its complex and interconnected nature (Rittel and Webber, 1973). Sargassum influxes are influenced by a complex interplay of both natural and anthropogenic factors, and the social dynamics associated with response planning and management are subject to real-world constraints which hinder (risk-free) attempts to find a solution. [...], This White Paper was funded by UNESCO-IOC and the EU H2020 project ‘EuroSea’ (grant agreement No 862626), With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed