Skip to main content

NUEVA TECNOLOGIA NO INVASIVA PARA INHIBICION DE CRECIMIENTO DE TUMORES SOLIDOS MEDIANTE ULTRASONIDOS DE BAJA INTENSIDAD

PID2021-128985OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis de maestría (MasterThesis)

Síntesis de fosfatos de calcio aplicada a la producción de andamios para la regeneración ósea maxilofacial

  • Carlos Javier Beigveder Núñez
La Hidroxiapatita (HA) es un material biocompatible y bioactivo con capacidad de integrarse en el organismo, promoviendo la formación de nuevo tejido óseo. Debido a su alta resistencia mecánica y baja reactividad, este fosfato cálcico resulta una excelente opción para su uso en implantología odontológica. Conociendo esto, este Trabajo Fin de Máster (TFM) tiene como objetivo general la síntesis de novedosos fosfatos de calcio de Hidroxiapatita (HA) de baja cristalinidad para la producción de andamios para la regeneración ósea maxilofacial. Para ello, se desarrollaron diferentes productos de HA dopadas con iones osteoinductivos de Magnesio para mejorar las propiedades biomecánicas del material, variando la concentración de Calcio y Magnesio mediante un método de vía húmeda, controlando las condiciones de temperatura, pH y tiempos de reacción. Para caracterizar y estudiar las propiedades físicas y químicas de la HA obtenida, se han empleado diferentes técnicas de análisis incluyendo Espectroscopía Infrarroja por Transformada de Fourier, Difracción de Rayos X y Microscopía Electrónica de Barrido, tomándose en cuenta aspectos fundamentales como la estructura molecular y el tamaño de partícula. Una vez caracterizado el producto, se ha combinado junto a un polímero biocompatible como lo es la Policaprolactona (PCL) para la fabricación de un filamento mediante un método de extrusión. Este material, a futuro se empleará para la fabricación de andamios por Fabricación Aditiva (FA) mediante la técnica de Fabricación de Filamento Fundido (FFF). Se encontró que el producto resultante presentaba una distribución homogénea de partículas, con una morfología adecuada y una estructura cristalina bien definida. No obstante, se encontraron fases secundarias, con aparición de grupos fosfatos y la presencia de brusita. Estos hallazgos indican que el material sintetizado tiene una estructura similar a la HA, lo que sugiere propiedades bioactivas y la capacidad de promover la formación de nuevo tejido óseo. Estudios adicionales en ensayos clínicos serían necesarios para comprender mejor las características y la interacción de este material ante tejido vivo., Proyecto PID2021-128985OB-I00 financiado por MICIN/AEI /10.13039/501100011033/ y por FEDER Una manera de hacer Europa, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis de maestría (MasterThesis)

BIOTINTAS HÍBRIDAS PARA BIOIMPRESIÓN DE MODELOS PARA DIFERENTES TEJIDOS

  • Nerea Arina Paños
Proyecto PID2021-128985OB-I00 financiado por MICIN/AEI /10.13039/501100011033/ y por FEDER Una manera de hacer Europa, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis de maestría (MasterThesis)

Bioimpresión 3D de modelos óseos basados en biotintas cargadas con hidroxiapatita

  • Carlos Escudero Rodríguez
The main objective of this study is to create and analyze biological inks containing strontium-containing hydroxyapatite (Sr-HA) for 3D printing of accurate bone models. This study aims to improve both the osteogenic and mechanical properties and cell viability of bioinks, with a view to their future use in bone regeneration. Hydroxyapatite (HA) was prepared through a meticulous controlled precipitation process, then endowed with strontium using specific incorporation methods. FTIR, XRD and TGA were used to analyze the materials, the structure of the HA was confirmed, improvements in its crystallinity and thermal stability were confirmed. The bioinks developed were based on alginate and gelatin gels, incorporating HA and Sr-HA to evaluate their rheological properties and their performance in 3D bioprinting. Viscosity, shear stress, and rotational recovery tests were performed to analyze the viability of these bioinks in the manufacture of scaffolds. The results indicated that the addition of Sr-HA significantly improved the viscosity and structural stability of the bioinks, favoring the printing of accurate and reproducible bone models. The cell viability of the bioprinted models was evaluated by the Alamar Blue assay, demonstrating that bioinks with Sr-HA promoted greater cell proliferation compared to bioinks that did not contain administered Sr, suggesting a more favorable environment for bone regeneration. In conclusion, the combination of hydroxyapatite with strontium and optimized bioinks represents a promising advance in the field of 3D bioprinting for applications in regenerative medicine, offering a potentially effective solution for the repair of complex bone tissues, MCIN/AEI/10.13039/501100011033/FEDER. Una manera de hacer Europa, grant number PID2021-128985OB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis de maestría (MasterThesis)

Influencia de la viscoelasticidad de biotintas en la migración celular

  • Héctor Navas Reig
PID2021-128985OB-I00 funded byMCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis de maestría (MasterThesis)

Estudio de parámetros de printabilidad en biotintas para modelos tisulares impresos en 3D”

  • Adriana Richter Lozada
Este Trabajo Fin de Máster se centra en el análisis y optimización de biotintas para bioimpresión 3D, combinando materiales naturales y sintéticos como poloxámeros, alginato, gelatina, metilcelulosa e hidroxiapatita. El estudio aborda aspectos clave como la caracterización reológica, la evaluación de la printabilidad y la viabilidad celular en modelos tridimensionales, utilizando líneas celulares PANC-1. Se identificaron formulaciones con comportamiento termosensible y capacidad de recuperación estructural tras la extrusión, así como buena fidelidad geométrica y estabilidad durante el cultivo celular. Además, se evaluó el impacto socioeconómico y legal de esta tecnología, analizando su proyección en el ámbito clínico, farmacéutico y de investigación biomédica. Los resultados obtenidos no solo validan la compatibilidad biológica de las biotintas desarrolladas, sino que sientan las bases para futuras aplicaciones funcionales en medicina personalizada, modelos tumorales y generación de tejidos bioimpresos más complejos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis de maestría (MasterThesis)

Strontium-doped apatite enriched bioinks: biological and rheological evaluation of 3D bioprinted constructs

  • Fiona Ye Rojo Acero
Developing adequate bioinks for 3D bioprinting is crucial for the progress in tissue engineering and regenerative medicine. In particular, in the domain of bone tissue engineering, it is essential not only to mimic the mechanical strength and mineral strontiumcontent of bone, but also to provide an osteoconductive environment that facilitates the growth and differentiation of osteoblasts. For this purpose, the main goal of this study is to formulate strontium-doped hydroxyapatite (Sr-OHAp)–enriched bioinks which are suitable for printing and promote cell viability and proliferation in the context of bone regeneration applications. Sr-OHAp particles were synthesized using chemical precipitation and surface adsorption techniques, followed by characterization to confirm their compatibility with extrusion bioprinting. Bioink formulations were prepared using sodium alginate and methyl cellulose, and were optimized for their rheological and printability properties. The rheological assessment revealed that all compositions exhibited shear-thinning and thixotropic behavior, with those containing Sr-OHAp showing enhanced shape fidelity and layer stacking during printing. Cell viability assays conducted with PANC-1 cells demonstrated that the inclusion of Sr-OHAp particles did not compromise cell survival and even improved viability after a period of 7 days. These findings suggest that Sr-OHAp-enriched bioinks are promising candidates for bone tissue engineering, integrating favorable mechanical characteristics with biocompatibility, MCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa., Peer reviewed