Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Development of ceramic-MOF filters from aluminum saline slags for capturing CO2

  • Torrez Herrera, Jonathan Josué
  • Korili, Sophia A.
  • Gil Bravo, Antonio
This study describes the procedures followed to synthesize ceramic-MOF filters using aluminum saline slag wastes. Briefly, the raw aluminum saline slags were washed at 80 ◦C to significantly reduce the saline content and eliminate gases. The pretreated material was mixed with glucose (G/S ratios between 0.2 and 1.6) and acetone by stirring for 4 h. After this time, the resulting solid was dried at 60 ◦C and then at 190 ◦C. During the glucose caramelization step, PegMn400 was also added and the temperature increased to 1200 ◦C. The obtained solid was impregnated with precursor solutions to achieve a supported ZIF-8 MOF. The ceramic-MOF filters were characterized by X-ray diffraction (XRD), N2 adsorption at 77 K, X-ray fluorescence (XRF), scanning electron microscopy (SEM) and transmission electron microscopy (HR-TEM), thereby confirming the presence of a structure that allows dispersion of the synthesized and supported ZIF-8. Finally, the performance of these ceramic-MOF filters as CO2 adsorbents was evaluated in the temperature range 50–300 ◦C, with isosteric heats of 19 kJ/mol being obtained using the Clausius-Clapeyron equation., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (AEI/MINECO) and Government of Navarra through projects PID2020-112656RB-C21 and 0011-3673- 2021-000004. JJTH thanks Universidad Pública de Navarra for a postdoctoral grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Classical and new insights into the methodology for characterizing adsorbents and metal catalysts by chemical adsorption

  • Gil Bravo, Antonio
The adsorption phenomenon has been used extensively to achieve and explain solid-state reactions, control contamination, and purify liquids and gases. This process implies the use of a porous medium or a material with specific adsorption centers where the interactions with the reagents occur. Determination of the properties of adsorbent or catalyst materials that do not contain specific adsorption sites by physical gas adsorption is a well-established procedure in most research and quality-control laboratories. However, characterizing the specific centers by selective adsorption—chemisorption—remains an open question for discussion and study. The specific centers involved are often acidic/basic and metallic; in most cases, reagents are adsorbed and desorbed in these centers, whose determination allows controlling the processes and comparing the materials. The techniques and procedures presented herein facilitate the evaluation and the qualitative and quantitative determination of the surface properties of the materials using chemisorption processes for metallic and acidic/basic sites. The aim of this work is to review these techniques and procedures, including the updates published by several researchers, who mostly strive to explain the results of bifunctional metallic and acid–base catalytic behavior., The author is grateful for financial support from the Spanish Ministry of Science and Innovation (AEI/MINECO) and Government of Navarra through projects PID2020-112656RB-C21 and 0011-3673-2021-000004. Open access funding provided by Universidad Pública de Navarra . AG also thanks Santander Bank for funding via the Research Intensification Program.