Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sunlight-Driven Green Synthesis of Platinum Nanoparticles From Double-Vacancy Halide Perovskite Precursors for Methanol Reforming

  • Chacón-Ruiz, Saray
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Mego, Kevin
  • Ruiz-Campos, Pedro
[EN] The development of synthetic procedures for preparing metal nanoparticles with controlled size using sunlight opens new avenues toward more sustainable methods with lower energy consumption. Herein, we propose the use of double-vacancy halide perovskites as precursors for engineering highly crystalline and small platinum nanoparticles (< 3 nm) under simulated sunlight irradiation, using low concentration of methanol as sacrificial agent at room temperature. The formation of Pt NP was dependent on the methanol concentration impacting in the final Pt particle size distribution and time formation. After purification, this narrow sized Pt NP were employed for the methanol reforming reaction, showing excellent activity after 4 h and high selectivity toward hydrogen production (4.18 mmol & centerdot;h(-1) of H-2), along with other carbon products such as CO (2.26 mmol & centerdot;h(-1)), CH4 (0.54 mmol & centerdot;h(-1)), CO2 (0.28 mmol & centerdot;h(-1)), and C-2 species (0.17 mmol & centerdot;h(-1))., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/ and "FEDER a way of making Europe," and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S). K.M. acknowledges the PRE2022-104119 grant for the project "Catalytic processes: Catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes." S.C.R. is thankful to PR-H2CVAL4-C1-2022-0090 grant funded by Union Europea NextGenerationEU. P.A. received funding from the PID2021-123163OB-I00 grant, and H.G.B. was supported by the RYC2022-037287-I grant and PAID-06-23. We thank to the technical team at the Instituto de Tecnologia Quimica (ITQ) for their support in facilitating the characterizations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laboratory Studies on Underground H2 Storage: Bibliometric Analysis and Review of Current Knowledge

  • Berrezueta Alvarado, Edgar Raúl
  • Kovacs, Timea
  • Herrera-Franco, Gricelda
  • Caicedo Potosí, Jhon
  • Jaya Montalvo, María
  • Ordóñez-Casado, Berta
  • Carrión-Mero, Paúl
  • Carneiro, Júlio
Dentro del número especial "Feature Review Papers in Energy Science and Technology"., [EN] The global demand for energy and the need to mitigate climate change require a shift from traditional fossil fuels to sustainable and renewable energy alternatives. Hydrogen is recognized as a significant component for achieving a carbon-neutral economy. This comprehensive review examines the underground hydrogen storage and, particularly, laboratory-scale studies related to rock–hydrogen interaction, exploring current knowledge. Using bibliometric analysis of data from the Scopus and Web of Science databases, this study reveals an exponential increase in scientific publications post-2015, which accounts for approximately 85.26% of total research output in this field and the relevance of laboratory experiments to understand the physicochemical interactions of hydrogen with geological formations. Processes in underground hydrogen storage are controlled by a set of multi-scale parameters, including solid properties (permeability, porosity, composition, and geomechanical properties) and fluid properties (liquid and gas density, viscosity, etc.), together with fluid–fluid and solid–fluid interactions (controlled by solubility, wettability, chemical reactions, etc.). Laboratory experiments aim to characterize these parameters and their evolution, simulating real-world storage conditions to enhance the reliability and applicability of findings. The review emphasizes the need to expand research efforts globally to comprehensively address the currently existing issues and knowledge gaps., This work was supported by national funds through the national funds through the -Convocatoria de Proyectos Misiones del CDTI, Spain- in the scope of UNDERGY (MIG-20211018) and UES365 (MIG-20201005) Projects; -National Plan Spain- in the scope of ALGEMAR Project (PID2021-123825OB-I00) and H2salt project (PR-H2CVAL4-C1-2022-0072)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Photo-Fermentative Bacteria Used for Hydrogen Production

  • Gupta, Soumya
  • Fernandes, Annabel
  • Lopes, Ana
  • Grasa, Laura
  • Salafranca, Jesús
Photo-fermentation is an efficient hydrogen production pathway in which purple non-sulfur bacteria (PNSB) play an active role and produce hydrogen as a part of their metabolism under optimal conditions. These bacteria work under the influence of light to advance their metabolism and use various substrates, such as simple sugars and volatile fatty acids, to produce hydrogen. This article presents a comparative review of several bacterial strains that have been efficiently used to produce hydrogen by photo-fermentation under different optimized conditions, including the substrate, its concentration, type and capacity of the bioreactor, light sources and intensities, and process conditions to achieve the maximum biohydrogen production rate. The analysis showed that the Rhodopseudomonas palustris is the main bacterium used for hydrogen production, with a maximum hydrogen production rate of 3.2 mM/h using 27.8 mM of glucose in a 165 mL serum bottle and 3.23 mM/h using 50 mM of glycerol at pH 7, followed by Rhodobacter sphaeroides, which gave a hydrogen production rate as high as 8.7 mM/h, using 40 mM of lactic acid, pH 7, and 30 °C temperature in a single-walled glass bioreactor. However, it is not preferred over R. palustris due to its versatile metabolism and ability to use an alternative mode if the conditions are not carefully adjusted, which can be a problem in hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microbes and parameters influencing dark fermentation for hydrogen production

  • Gupta, Soumya
  • Fernandes, Annabel
  • Lopes, Ana
  • Grasa, Laura
  • Salafranca, Jesús
Dark fermentation is a promising method for hydrogen (H2) production utilizing the metabolic pathways of diverse microbial communities. This process can be carried out without the need for light, making it easier and more efficient to operate in different environments and at a lower cost. It also utilizes a wide range of substrates, making it highly adaptable to waste-to-energy applications. Clostridium spp. are particularly favored in this method due to their versatile metabolism, ability to utilize a wide range of substrates, and high H2 yields. Anaerobes and facultative anaerobes are mostly used in studies due to their efficient hydrogenase enzyme activity and metabolic pathways. A pH range of 5.5–6.5 and a temperature of 30–37 °C for mesophiles and 55–60 °C for thermophiles are usually preferred in addition to the other parameters such as hydraulic retention time and substrate used. The highest H2 yield of 9.39 mol H2/mol sucrose consumed was obtained by C. beijerinckii using sucrose as a substrate under batch mode conditions at 37 °C and pH 6–7. The review analyzes different bacterial species and examines the influence of optimized parameters required on H2 yield in different bioreactor operating modes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Performance of a Continuous Dark–Photo Fermentation System to Produce Hydrogen from Simulated Sugar–Rich Processing Wastewater Under Suboptimal pH and Temperature Conditions

  • Gupta, Soumya
  • Fernandes, Annabel
  • Grasa, Laura
  • Rubio, Carlos
  • Salafranca, Jesús
The integration of coupled dark fermentation (DF) and photofermentation (PF) systems represents a promising approach for concurrent H2 production and organic load reduction in carbohydrate–rich wastewater. However, their behavior under non–optimized, continuous industrial operation remains inadequately characterized, hindering practical implementation. This case study evaluated an integrated DF–PF system treating a synthetic sugar mixture mimicking acidic fruit and dairy processing wastewater. The system presented herein (5-L reactors) serves as an initial prototype to facilitate scaling to both pilot (40-L reactors) and, ultimately, industrial (600-L) scales using real effluents within the framework of a research project. The bioreactors were operated continuously with a 10 h hydraulic retention time and an organic loading rate of 2.5 g COD L−1 d−1. The pH and temperature were monitored but intentionally left uncontrolled. The DF stage facilitated by hydrogen–producing bacteria achieved H2 concentrations of up to 57% (v/v) and a maximum production rate of 177 mL H2 L−1 d−1; however, it demonstrated notable process instability due to the absence of controls. In contrast, the PF stage exhibited negligible H2 production (1.8% v/v) attributable to the displacement of Rhodopseudomonas species by microbial competition, thereby functioning predominantly as a polishing step. Overall, the coupled system achieved an average COD removal of 34%, highlighting the functional differentiation between stages and identifying microbial competition as the primary constraint under suboptimal conditions.