Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Advancing electrified CO2 capture: Material design strategies for magnetic adsorption composites

  • Stratil, Oliver
  • Cespedes, Oscar
  • Croquet, Olivier
  • Visart de Bocarmé, Thierry
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This study investigates the design and performance of magnetic adsorption composites (MACs) for application in electrified CO2 capture with temperature swing adsorption from point sources. The MACs were composed of Fe3O4 as magnetic component to act as inductive heating source and zeolite 13× as a CO2 adsorbent. Three MAC configurations were prepared and evaluated under temperature feedback-loop control at different desorption temperatures ranging between 100−150°C: Homogeneous mixture of Fe3O4 and zeolite 13×, a core-shell structure with magnetic Fe3O4 core and zeolite 13× shell, and a mixed bed configuration containing separate heating and adsorbent beads. Resistive wall heated and room-temperature desorption experiments were conducted as references. In average, the heating experiments reached a steady-state effective working capacity after around 20 adsorption-desorption cycles. The homogenous mixture exhibited the most favorable performance, combining fast heating response, stable temperature control, and high CO2 desorption efficiency. When reaching steady state, it achieved 99% desorption within 94s and the highest productivity of 0.52 mgCO2 / gMAC*S with a theoretical regeneration energy of 3.0 MJ/kgCO2 [Formula presented]. The core-shell structure showed limited temperature control due to low heat transfer through the shell, while the mixed bed configuration achieved moderate performance. Compared with column wall heating, inductive heating improved thermal efficiency by delivering heat directly to the adsorbent region. However, efficient coupling of the magnetic field to the magnetic material remains the key challenge for energy efficient induction heated TSA., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Electrifying CO2 temperature swing adsorption: A comparative review of resistive, induction, and microwave heating from material properties to process performance

  • Stratil, Oliver
  • Gonzalez Olmos, Rafael
  • FERNANDEZ, JAVIER
Electrified temperature swing adsorption (eTSA) has emerged as a promising approach for intensified post-combustion CO2 capture by enabling direct heat generation within the adsorption bed and thereby reducing the thermal limitations associated with conventional externally heated TSA systems. This review systematically compares the three main electrified heating approaches currently investigated for post-combustion CO2 capture: Resistive heating (RH), Induction heating (IH), and Microwave heating (MWH). To improve comparability across the fragmented and predominantly laboratory-scale eTSA literature, publications of comparable boundary conditions were analyzed using homogeneous evaluation criteria including working capacity, CO2/N2 selectivity, heating rate, temperature homogeneity, regeneration energy and electrical and thermal energy efficiencies. Among the reviewed adsorbents, physisorbents dominated the current eTSA literature, particularly metal-organic frameworks (MOFs), zeolites, and activated carbons (ACs). Mg-MOF-74 and Mg-Gallate exhibited the highest working capacities, followed by the zeolites 13X and NaUSY, while AC offers direct applicability for RH and MWH because of its conductive and microwave-responsive properties. However, humidity sensitivity remains a major limitation for high adsorption capacity physisorbents. All reviewed electrified heating approaches achieved substantially higher heating rates than conventional conductive wall heating or hot gas purge systems. RH has a potentially very high overall energy efficiency, although homogeneous current distribution remains challenging. IH provides high flexibility in adsorbent selection through magnetic heating additives and offers strong potential for homogeneous internal heating, while efficient magnetic field coupling remains the key challenge for energy-efficient operation. MWH enables extremely rapid heating without necessarily requiring additional heating materials but faces challenges regarding temperature homogeneity and electric-to-thermal energy efficiency. Overall, all electrified approaches still face important scale-up challenges regarding heat and field distribution, and electrical-to-thermal energy efficiency. This review highlights the strong potential of eTSA for flexible and intensified CO2 capture while identifying humidity-tolerant adsorbents, cyclic stability, heat-management optimization, and realistic process-scale evaluation as key priorities for future research and industrial implementation., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Non-thermal plasma CO2 conversion enhanced by CeO2-doped BaTiO3 and internal electrode cooling

  • Stratil, Oliver
  • Pou, Josep Oriol
  • Abad, Manuel David
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This work investigates the combined impact of using cerium oxide (CeO2) as a catalyst and internal electrode cooling on CO2 conversion into CO in a non-thermal plasma reactor packed with barium titanate (BaTiO3). BaTiO3 is successfully modified with CeO2 via a wetness impregnation method, yielding samples with 0%, 3%, 17%, and 57% CeO2 loadings. It is observed that a low CeO2 loading of 3% increased the CO2 conversion and energy efficiency by up to 38% compared to the undoped BaTiO3, while higher loadings (17% and 57%) led to reduced performance. The use of a cooling strategy through the inner electrode, using air convection (passive cooling) or water flow (active cooling), increases both CO2 conversion and energy efficiency by strengthening plasma generation and reducing the recombination of CO and O2. Specifically, conversion increases from 18% without cooling to 36% with passive cooling, and further to 47% when combined with 3% CeO2 doping and active water cooling. In parallel, the energy efficiency increases from 0.3 - 2% (undoped, uncooled) to 0.5 - 16% with 3% CeO2 doping under both passive and active internal cooling., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Advancing electrified CO2 capture: Material design strategies for magnetic adsorption composites

  • Stratil, Oliver
  • Cespedes, Oscar
  • Croquet, Olivier
  • Visart de Bocarmé, Thierry
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This study investigates the design and performance of magnetic adsorption composites (MACs) for application in electrified CO2 capture with temperature swing adsorption from point sources. The MACs were composed of Fe3O4 as magnetic component to act as inductive heating source and zeolite 13× as a CO2 adsorbent. Three MAC configurations were prepared and evaluated under temperature feedback-loop control at different desorption temperatures ranging between 100−150°C: Homogeneous mixture of Fe3O4 and zeolite 13×, a core-shell structure with magnetic Fe3O4 core and zeolite 13× shell, and a mixed bed configuration containing separate heating and adsorbent beads. Resistive wall heated and room-temperature desorption experiments were conducted as references. In average, the heating experiments reached a steady-state effective working capacity after around 20 adsorption-desorption cycles. The homogenous mixture exhibited the most favorable performance, combining fast heating response, stable temperature control, and high CO2 desorption efficiency. When reaching steady state, it achieved 99% desorption within 94s and the highest productivity of 0.52 mgCO2 / gMAC*S with a theoretical regeneration energy of 3.0 MJ/kgCO2 [Formula presented]. The core-shell structure showed limited temperature control due to low heat transfer through the shell, while the mixed bed configuration achieved moderate performance. Compared with column wall heating, inductive heating improved thermal efficiency by delivering heat directly to the adsorbent region. However, efficient coupling of the magnetic field to the magnetic material remains the key challenge for energy efficient induction heated TSA., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Electrifying CO2 temperature swing adsorption: A comparative review of resistive, induction, and microwave heating from material properties to process performance

  • Stratil, Oliver
  • Gonzalez Olmos, Rafael
  • FERNANDEZ, JAVIER
Electrified temperature swing adsorption (eTSA) has emerged as a promising approach for intensified post-combustion CO2 capture by enabling direct heat generation within the adsorption bed and thereby reducing the thermal limitations associated with conventional externally heated TSA systems. This review systematically compares the three main electrified heating approaches currently investigated for post-combustion CO2 capture: Resistive heating (RH), Induction heating (IH), and Microwave heating (MWH). To improve comparability across the fragmented and predominantly laboratory-scale eTSA literature, publications of comparable boundary conditions were analyzed using homogeneous evaluation criteria including working capacity, CO2/N2 selectivity, heating rate, temperature homogeneity, regeneration energy and electrical and thermal energy efficiencies. Among the reviewed adsorbents, physisorbents dominated the current eTSA literature, particularly metal-organic frameworks (MOFs), zeolites, and activated carbons (ACs). Mg-MOF-74 and Mg-Gallate exhibited the highest working capacities, followed by the zeolites 13X and NaUSY, while AC offers direct applicability for RH and MWH because of its conductive and microwave-responsive properties. However, humidity sensitivity remains a major limitation for high adsorption capacity physisorbents. All reviewed electrified heating approaches achieved substantially higher heating rates than conventional conductive wall heating or hot gas purge systems. RH has a potentially very high overall energy efficiency, although homogeneous current distribution remains challenging. IH provides high flexibility in adsorbent selection through magnetic heating additives and offers strong potential for homogeneous internal heating, while efficient magnetic field coupling remains the key challenge for energy-efficient operation. MWH enables extremely rapid heating without necessarily requiring additional heating materials but faces challenges regarding temperature homogeneity and electric-to-thermal energy efficiency. Overall, all electrified approaches still face important scale-up challenges regarding heat and field distribution, and electrical-to-thermal energy efficiency. This review highlights the strong potential of eTSA for flexible and intensified CO2 capture while identifying humidity-tolerant adsorbents, cyclic stability, heat-management optimization, and realistic process-scale evaluation as key priorities for future research and industrial implementation., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Non-thermal plasma CO2 conversion enhanced by CeO2-doped BaTiO3 and internal electrode cooling

  • Stratil, Oliver
  • Pou, Josep Oriol
  • Abad, Manuel David
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This work investigates the combined impact of using cerium oxide (CeO2) as a catalyst and internal electrode cooling on CO2 conversion into CO in a non-thermal plasma reactor packed with barium titanate (BaTiO3). BaTiO3 is successfully modified with CeO2 via a wetness impregnation method, yielding samples with 0%, 3%, 17%, and 57% CeO2 loadings. It is observed that a low CeO2 loading of 3% increased the CO2 conversion and energy efficiency by up to 38% compared to the undoped BaTiO3, while higher loadings (17% and 57%) led to reduced performance. The use of a cooling strategy through the inner electrode, using air convection (passive cooling) or water flow (active cooling), increases both CO2 conversion and energy efficiency by strengthening plasma generation and reducing the recombination of CO and O2. Specifically, conversion increases from 18% without cooling to 36% with passive cooling, and further to 47% when combined with 3% CeO2 doping and active water cooling. In parallel, the energy efficiency increases from 0.3 - 2% (undoped, uncooled) to 0.5 - 16% with 3% CeO2 doping under both passive and active internal cooling., info:eu-repo/semantics/publishedVersion