Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ARCIMBOLDO-LITE: Single-workstation implementation and use

  • Sammito, Massimo
  • Millán, Claudia
  • Frieske, Dawid
  • Rodríguez-Freire, Eloy
  • Borges, Rafael J.
  • Usón, Isabel
© 2015 International Union of Crystallography. ARCIMBOLDO solves the phase problem at resolutions of around 2 Å or better through massive combination of small fragments and density modification. For complex structures, this imposes a need for a powerful grid where calculations can be distributed, but for structures with up to 200 amino acids in the asymmetric unit a single workstation may suffice. The use and performance of the single-workstation implementation, ARCIMBOLDO-LITE, on a pool of test structures with 40-120 amino acids and resolutions between 0.54 and 2.2 Å is described. Inbuilt polyalanine helices and iron cofactors are used as search fragments. ARCIMBOLDO-BORGES can also run on a single workstation to solve structures in this test set using precomputed libraries of local folds. The results of this study have been incorporated into an automated, resolution- and hardware-dependent parameterization. ARCIMBOLDO has been thoroughly rewritten and three binaries are now available: ARCIMBOLDO-LITE, ARCIMBOLDO-SHREDDER and ARCIMBOLDO-BORGES. The programs and libraries can be downloaded from http://chango.ibmb.csic.es/ARCIMBOLDO-LITE., This work was supported by grants BFU2012-35367 and BIO2013-49604-EXP (the Spanish Ministry of Economy and Competitiveness) and Generalitat de Catalunya (2014SGR-997). RJB acknowledges a grant from the Brazilian Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combining phase information in reciprocal space for molecular replacement with partial models

  • Millán, Claudia
  • Sammito, Massimo
  • García Ferrer, Irene
  • Goulas, Theodoros
  • Sheldrick, George M.
  • Usón, Isabel
© 2015 International Union of Crystallography. ARCIMBOLDO allows ab initio phasing of macromolecular structures below atomic resolution by exploiting the location of small model fragments combined with density modification in a multisolution frame. The model fragments can be either secondary-structure elements predicted from the sequence or tertiary-structure fragments. The latter can be derived from libraries of typical local folds or from related structures, such as a low-homology model that is unsuccessful in molecular replacement. In all ARCIMBOLDO applications, fragments are searched for sequentially. Correct partial solutions obtained after each fragment-search stage but lacking the necessary phasing power can, if combined, succeed. Here, an analysis is presented of the clustering of partial solutions in reciprocal space and of its application to a set of different cases. In practice, the task of combining model fragments from an ARCIMBOLDO run requires their referral to a common origin and is complicated by the presence of correct and incorrect solutions as well as by their not being independent. The F-weighted mean phase difference has been used as a figure of merit. Clustering perfect, non-overlapping fragments dismembered from test structures in polar and nonpolar space groups shows that density modification before determining the relative origin shift enhances its discrimination. In the case of nonpolar space groups, clustering of ARCIMBOLDO solutions from secondary-structure models is feasible. The use of partially overlapping search fragments provides a more favourable circumstance and was assessed on a test case. Applying the devised strategy, a previously unknown structure was solved from clustered correct partial solutions., This work was supported by grants BFU2012-35367 and BIO2013-49604-EXP from the Spanish Ministry of Economy and Competitiveness and 2014SGR-997 from Generalitat de Catalunya, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystallographic structure solution, Resolución de estructuras cristalográficas

  • Millán, Claudia
  • Usón, Isabel
© 2015 CSIC. The three-dimensional view of molecules at the atomic level provided by X-ray crystallography is not only extremely informative but is also easily and intuitively understood by humans, who very much rely on their vision. However, unlike microscopy, this technique does not directly yield an image. The structural model cannot be directly calculated from the diffraction data, as only the intensities of scattered beams and not their phases are experimentally accessible. In order to obtain the 3-dimensional structure phases have to be obtained by either additional experimental or computational methods. This is known as the phase problem in crystallography. In this manuscript we provide an overview of major milestones along the quest for the lost phases., This work was supported by grants BFU2012-35367 and BIO2013-49604- EXP (the Spanish MINECO) and Generalitat de Catalunya (2014SGR-997), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vaccinia virus immunomodulator A46: A lipid and protein-binding scaffold for sequestering host TIR-domain proteins

  • Fedosyuk, Sofiya
  • Sammito, Massimo
  • Usón, Isabel
  • Skern, Tim
Vaccinia virus interferes with early events of the activation pathway of the transcriptional factor NF-kB by binding to numerous host TIR-domain containing adaptor proteins. We have previously determined the X-ray structure of the A46 C-terminal domain; however, the structure and function of the A46 N-terminal domain and its relationship to the C-terminal domain have remained unclear. Here, we biophysically characterize residues 1-83 of the N-terminal domain of A46 and present the X-ray structure at 1.55 Å. Crystallographic phases were obtained by a recently developed ab initio method entitled ARCIMBOLDO_BORGES that employs tertiary structure libraries extracted from the Protein Data Bank; data analysis revealed an all β-sheet structure. This is the first such structure solved by this method which should be applicable to any protein composed entirely of β-sheets. The A46(1-83) structure itself is a β-sandwich containing a co-purified molecule of myristic acid inside a hydrophobic pocket and represents a previously unknown lipid-binding fold. Mass spectrometry analysis confirmed the presence of long-chain fatty acids in both N-terminal and full-length A46; mutation of the hydrophobic pocket reduced the lipid content. Using a combination of high resolution X-ray structures of the N-and C-terminal domains and SAXS analysis of full-length protein A46(1-240), we present here a structural model of A46 in a tetrameric assembly. Integrating affinity measurements and structural data, we propose how A46 simultaneously interferes with several TIR-domain containing proteins to inhibit NF-κB activation and postulate that A46 employs a bipartite binding arrangement to sequester the host immune adaptors TRAM and MyD88., TS received Austrian Science Fund (FWF) grants P24038, W1221 and W1258. GAB is a member of Max F. Perutz Laboratories and the Vienna International PostDoctoral Program (VIPS). TKS is a holder of Wellcome Trust grant 097831. IU has Spanish Ministry of Economy and Competitiveness grant BIO2013-49604-EXP., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploiting distant homologues for phasing through the generation of compact fragments, local fold refinement and partial solution combination

  • Millán, Claudia
  • Sammito, Massimo
  • McCoy, Airlie J.
  • Ziem Nascimento, Andrey Fabricio
  • Petrillo, Giovanna
  • Oeffner, Robert D.
  • Domínguez-Gil, Teresa
  • Hermoso, Juan A.
  • Read, Randy J.
  • Usón, Isabel
Macromolecular structures can be solved by molecular replacement provided that suitable search models are available. Models from distant homologues may deviate too much from the target structure to succeed, notwithstanding an overall similar fold or even their featuring areas of very close geometry. Successful methods to make the most of such templates usually rely on the degree of conservation to select and improve search models. ARCIMBOLDO_ SHREDDER uses fragments derived from distant homologues in a brute-force approach driven by the experimental data, instead of by sequence similarity. The new algorithms implemented in ARCIMBOLDO_SHREDDER are described in detail, illustrating its characteristic aspects in the solution of new and test structures. In an advance from the previously published algorithm, which was based on omitting or extracting contiguous polypeptide spans, model generation now uses three-dimensional volumes respecting structural units. The optimal fragment size is estimated from the expected log-likelihood gain (LLG) values computed assuming that a substructure can be found with a level of accuracy near that required for successful extension of the structure, typically below 0.6 A ° root-mean-square deviation (r.m.s.d.) from the target. Better sampling is attempted through model trimming or decomposition into rigid groups and optimization through Phaser’s gyre refinement. Also, after model translation, packing filtering and refinement, models are either disassembled into predetermined rigid groups and refined (gimble refinement) or Phaser’s LLGguided pruning is used to trim the model of residues that are not contributing signal to the LLG at the target r.m.s.d. value. Phase combination among consistent partial solutions is performed in reciprocal space with ALIXE. Finally, density modification and main-chain autotracing in SHELXE serve to expand to the full structure and identify successful solutions. The performance on test data and the solution of new structures are described., MS and CM received financial support from CCP4 for a research stay in the group of RJR. CM is grateful to MINECO for her BES-2015-071397 scholarship associated with the Structural Biology Maria de Maeztu Unit of Excellence. AFZN received a fellowship from Conselho Nacional de Desenvolvimento Cientı´fico e Tecnolo´ gico (CNPq), Brazil. GP acknowledges the Generalitat de Catalunya for an Industrial Doctorate predoctoral fellowship at Biochemize S.L. This work was supported by grants BIO2015-64216-P, BIO2013- 49604-EXP, BFU2014-59389-P and MDM2014-0435-01 from the Spanish Ministry of Economy and Competitiveness and 2014SGR-997 from Generalitat de Catalunya. This research was supported by the Wellcome Trust (Principal Research Fellowship to RJR, grant 082961/Z/07/Z) and by grant BB/ L006014/1 from the BBSRC, UK. The research was facilitated by Wellcome Trust Strategic Award 100140 to the Cambridge Institute for Medical Research. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 635595 (CarbaZymes)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Matrix metalloproteinases outside vertebrates

  • Marino-Puertas, Laura
  • Goulas, Theodoros
  • Gomis-Rüth, F. Xavier
The matrix metalloproteinase (MMP) family belongs to the metzincin clan of zinc-dependent metallopeptidases. Due to their enormous implications in physiology and disease, MMPs have mainly been studied in vertebrates. They are engaged in extracellular protein processing and degradation, and present extensive paralogy, with 23 forms in humans. One characteristic of MMPs is a ~ 165-residue catalytic domain (CD), which has been structurally studied for 14 MMPs from human, mouse, rat, pig and the oral-microbiome bacterium Tannerella forsythia. These studies revealed close overall coincidence and characteristic structural features, which distinguish MMPs from other metzincins and give rise to a sequence pattern for their identification. Here, we reviewed the literature available on MMPs outside vertebrates and performed database searches for potential MMP CDs in invertebrates, plants, fungi, viruses, protists, archaea and bacteria. These and previous results revealed that MMPs are widely present in several copies in Eumetazoa and higher plants (Tracheophyta), but have just token presence in eukaryotic algae. A few dozen sequences were found in Ascomycota (within fungi) and in double-stranded DNA viruses infecting invertebrates (within viruses). In contrast, a few hundred sequences were found in archaea and > 1000 in bacteria, with several copies for some species. Most of the archaeal and bacterial phyla containing potential MMPs are present in human oral and gut microbiomes. Overall, MMP-like sequences are present across all kingdoms of life, but their asymmetric distribution contradicts the vertical descent model from a eubacterial or archaeal ancestor. This article is part of a Special Issue entitled: Matrix Metalloproteinases edited by Rafael Fridman, This study was supported in part by grants from European, Spanish, and Catalan Agencies (grant references FP7-HEALTH-2012-306029-2 “TRIGGER”; BFU2015-64487R, MDM-2014-0435; BIO2013-49320- EXP; BIO2015-64216-P; BIO2013-49604-EXP; and 2014SGR9). The Structural Biology Unit (www.sbu.csic.es) of IBMB is a “María de Maeztu” Unit of Excellence from the Spanish Ministry of Economy, Industry and Competitiveness, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An introduction to experimental phasing of macromolecules illustrated by SHELX; new autotracing features

  • Usón, Isabel
  • Sheldrick, George M.
For the purpose of this article, experimental phasing is understood to mean the determination of macromolecular structures by exploiting small intensity differences of Friedel opposites and possibly of reflections measured at different wavelengths or for heavy-atom derivatives, without the use of specific structural models. The SHELX programs provide a robust and efficient route for routine structure solution by the SAD, MAD and related methods, but involve a number of simplifying assumptions that may limit their applicability in borderline cases. The substructure atoms (i.e. those with significant anomalous scattering) are first located by direct methods, and the experimental data are then used to estimate phase shifts that are added to the substructure phases to obtain starting phases for the native reflections. These are then improved by density modification and, if the resolution of the data and the type of structure permit, polyalanine tracing. A number of extensions to the tracing algorithm are discussed; these are designed to improve its performance at low resolution. Given native data to 2.5 Å resolution or better, a correlation coefficient greater than 25% between the structure factors calculated from such a trace and the native data is usually a good indication that the structure has been solved., We are grateful to the State of Niedersachsen and the Volkswagenstiftung for the award of Niedersachsenprofessur to GMS. IU acknowledges grants BIO2015-64216-P, BIO2013- 49604-EXP and MDM2014-0435 from the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ARCIMBOLDO on coiled coils

  • Caballero, Iracema
  • Sammito, Massimo
  • Millán, Claudia
  • Lebedev, Andrey
  • Soler, Nicolas
  • Usón, Isabel
ARCIMBOLDO solves the phase problem by combining the location of small model fragments using Phaser with density modification and autotracing using SHELXE. Mainly helical structures constitute favourable cases, which can be solved using polyalanine helical fragments as search models. Nevertheless, the solution of coiled-coil structures is often complicated by their anisotropic diffraction and apparent translational noncrystallographic symmetry. Long, straight helices have internal translational symmetry and their alignment in preferential directions gives rise to systematic overlap of Patterson vectors. This situation has to be differentiated from the translational symmetry relating different monomers. ARCIMBOLDO_LITE has been run on single workstations on a test pool of 150 coiled-coil structures with 15–635 amino acids per asymmetric unit and with diffraction data resolutions of between 0.9 and 3.0 Å. The results have been used to identify and address specific issues when solving this class of structures using ARCIMBOLDO. Features from Phaser v.2.7 onwards are essential to correct anisotropy and produce translation solutions that will pass the packing filters. As the resolution becomes worse than 2.3 Å, the helix direction may be reversed in the placed fragments. Differentiation between true solutions and pseudo-solutions, in which helix fragments were correctly positioned but in a reverse orientation, was found to be problematic at resolutions worse than 2.3 Å. Therefore, after every new fragment-placement round, complete or sparse combinations of helices in alternative directions are generated and evaluated. The final solution is once again probed by helix reversal, refinement and extension. To conclude, density modification and SHELXE autotracing incorporating helical constraints is also exploited to extend the resolution limit in the case of coiled coils and to enhance the identification of correct solutions. This study resulted in a specialized mode within ARCIMBOLDO for the solution of coiled-coil structures, which overrides the resolution limit and can be invoked from the command line (keyword coiled_coil) or ARCIMBOLDO_LITE task interface in CCP4i., This work was supported by grants BIO2015-64216-P and BIO2013-49604-EXP and MDM2014-0435 from the Spanish Ministry of Economy and Competitiveness and Generalitat de Catalunya (2014SGR-997). MS and CM thank CCP4 for supporting a one-year research stay at the CIMR in Cambridge., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gyre and gimble: a maximum-likelihood replacement for Patterson correlation refinement

  • McCoy, Airlie J.
  • Oeffner, Robert D.
  • Millán, Claudia
  • Sammito, Massimo
  • Usón, Isabel
  • Read, Randy J.
Descriptions are given of the maximum-likelihood gyre method implemented in Phaser for optimizing the orientation and relative position of rigid-body fragments of a model after the orientation of the model has been identified, but before the model has been positioned in the unit cell, and also the related gimble method for the refinement of rigid-body fragments of the model after positioning. Gyre refinement helps to lower the root-mean-square atomic displacements between model and target molecular-replacement solutions for the test case of antibody Fab(26-10) and improves structure solution with ARCIMBOLDO_SHREDDER., This research was supported by the Wellcome Trust (Principal Research Fellowship to RJR, grant 082961/Z/07/Z) and by grant BB/L006014/1 from the BBSRC, UK. The research was facilitated by Wellcome Trust Strategic Award 100140 to the Cambridge Institute for Medical Research. MS and CM received financial support from CCP4 for a sabbatical in the group of RJR. CM is grateful to MINECO for her BES-2015- 071397 scholarship associated with the Structural Biology Maria de Maeztu Unit of Excellence. IU was supported by grants BIO2015-64216-P, BIO2013-49604-EXP and MDM2014-0435-01 (the Spanish Ministry of Economy and Competitiveness) and Generalitat de Catalunya (2014SGR997)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the application of the expected log-likelihood gain to decision making in molecular replacement

  • Oeffner, Robert D.
  • Afonine, Pavel V.
  • Millán, Claudia
  • Sammito, Massimo
  • Usón, Isabel
  • Read, Randy J.
  • McCoy, Airlie J.
Molecular-replacement phasing of macromolecular crystal structures is often fast, but if a molecular-replacement solution is not immediately obtained the crystallographer must judge whether to pursue molecular replacement or to attempt experimental phasing as the quickest path to structure solution. The introduction of the expected log-likelihood gain [eLLG; McCoy et al. (2017), Proc. Natl Acad. Sci. USA, 114, 3637–3641] has given the crystallographer a powerful new tool to aid in making this decision. The eLLG is the log-likelihood gain on intensity [LLGI; Read & McCoy (2016), Acta Cryst. D72, 375–387] expected from a correctly placed model. It is calculated as a sum over the reflections of a function dependent on the fraction of the scattering for which the model accounts, the estimated model coordinate error and the measurement errors in the data. It is shown how the eLLG may be used to answer the question ‘can I solve my structure by molecular replacement?’. However, this is only the most obvious of the applications of the eLLG. It is also discussed how the eLLG may be used to determine the search order and minimal data requirements for obtaining a molecular-replacement solution using a given model, and for decision making in fragment-based molecular replacement, single-atom molecular replacement and likelihood-guided model pruning., Funding for this research was provided by: Wellcome Trust (grant No. 082961/Z/07/Z to Randy J. Read); BBSRC (grant No. BB/L006014/1 to Randy J. Read; bursary No. BB/L006014/ 1 to Claudia Milla´n, Massimo Sammito); Spanish Ministry of Economy and Competitiveness (grant No. BIO2015-64216-P to Isabel Uso´n; grant No. BIO2013-49604-EXP to Isabel Usón; grant No. MDM2014-0435-01 to Isabel Usón; scholarship No. BES-2015-071397 to Claudia Millán); National Institutes of Health (grant No. P01GM063210 to Randy J. Read)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ALEPH: A Network-oriented approach for the generation of fragment-based libraries and for structure interpretation

  • Medina Bernal, Ana del Rocío
  • Triviño, Josep
  • Borges, Rafael J.
  • Millán, Claudia
  • Usón, Isabel
  • Sammito, Massimo
The analysis of large structural databases reveals general features and relationships among proteins, providing useful insight. A different approach is required to characterize ubiquitous secondary-structure elements, where flexibility is essential in order to capture small local differences. The ALEPH software is optimized for the analysis and the extraction of small protein folds by relying on their geometry rather than on their sequence. The annotation of the structural variability of a given fold provides valuable information for fragment-based molecular-replacement methods, in which testing alternative model hypotheses can succeed in solving difficult structures when no homology models are available or are successful. ARCIMBOLDO_BORGES combines the use of composite secondary-structure elements as a search model with density modification and tracing to reveal the rest of the structure when both steps are successful. This phasing method relies on general fold libraries describing variations around a given pattern of β-sheets and helices extracted using ALEPH. The program introduces characteristic vectors defined from the main-chain atoms as a way to describe the geometrical properties of the structure. ALEPH encodes structural properties in a graph network, the exploration of which allows secondary-structure annotation, decomposition of a structure into small compact folds, generation of libraries of models representing a variation of a given fold and finally superposition of these folds onto a target structure. These functions are available through a graphical interface designed to interactively show the results of structure manipulation, annotation, fold decomposition, clustering and library generation. ALEPH can produce pictures of the graphs, structures and folds for publication purposes., MDS acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 790122. AM and CM wish to thank the Spanish Ministry of Economy and Competitiveness for grants BES-2017-080368 and BES-2015- 071397, respectively. RJB received a fellowship from FAPESP (16/24191-8 and 17/13485-3). This work was supported by grants BIO2015-64216-P, BIO2013-49604-EXP and MDM2014-0435-01 from the Spanish Ministry of Science and Innovation.