Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Methods for the In Vitro Characterization of Nanomedicines—Biological Component Interaction

  • Fornaguera, Cristina
  • Solans, Conxita
The design of colloidal nanosystems intended for biomedical applications, specifically in the field of personalized medicine, has increased notably in the last years. Consequently, a variety of characterization techniques devoted to studying nanomedicine interactions with proteins and cells have been developed, since a deep characterization of nanosystems is required before starting preclinical and clinical studies. In this context, this review aims to summarize the main techniques used to assess the interaction of nanomedicines with biological systems, highlighting their advantages and disadvantages. Testing designed nanomaterials with these techniques is required in order to have more information about their behavior on a physiological environment. Moreover, techniques used to study the interaction of nanomedicines with proteins, such as albumin and fibrinogen, are summarized. These interactions are not desired, since they usually are the first signal to the body for the activation of the immune system, which leads to the clearance of the exogenous components. On the other hand, techniques for studying the cell toxicity of nanosystems are also summarized, since this information is required before starting preclinical steps. The translation of knowledge from novel designed nanosystems at a research laboratory scale to real human therapies is usually a limiting or even a final point due to the lack of systematic studies regarding these two aspects: nanoparticle interaction with biological components and nanoparticle cytotoxicity. In conclusion, this review will be a useful support for those scientists aiming to develop nanosystems for nanomedicine purposes., Financial support from the Spanish Ministry of Economy and Competitivity, MINECO (grant CTQ2014-52687-C-1-P and CTQ2016-80645-R) and Generaltitat de Catalunya (grant 2014-SGR-1655) is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, and CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Personalized nanomedicine: A revolution at the nanoscale

  • Fornaguera, Cristina
  • García-Celma, M. J.
This article belongs to the Special Issue Personalized Nanomedicine., Nanomedicine is an interdisciplinary research field that results from the application of nanotechnology to medicine and has the potential to significantly improve some current treatments Specifically, in the field of personalized medicine, it is expected to have a great impact in the near future due to its multiple advantages, namely its versatility to adapt a drug to a cohort of patients. In the present review, the properties and requirements of pharmaceutical dosage forms at the nanoscale, so-called nanomedicines, are been highlighted. An overview of the main current nanomedicines in pre-clinical and clinical development is presented, detailing the challenges to the personalization of these therapies. Next, the process of development of novel nanomedicines is described, from their design in research labs to their arrival on the market, including considerations for the design of nanomedicines adapted to the requirements of the market to achieve safe, effective, and quality products. Finally, attention is given to the point of view of the pharmaceutical industry including regulation issues applied to the specific case of personalized medicine. The authors expect this review to be a useful overview of the current state of the art of nanomedicine research and industrial production, and the future opportunities of personalized medicine in the upcoming years The authors encourage the development and marketing of novel personalized nanomedicines., C.F. is grateful to MINECO for their “Programa Torres Quevedo” grant. Financial support from Generalitat de Catalunya (grant 2014SGR1655) and MINECO (grant CTQ2016-80645-R) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cubic Liquid Crystalline Structures in Diluted, Concentrated and Highly Concentrated Emulsions for Topical Application: Influence on Drug Release and Human Skin Permeation

  • Arias, Eva María
  • Guiró, Pere
  • Rodríguez-Abreu, Carlos
  • Solans, Conxita
  • Escribano-Ferrer, Elvira
  • García-Celma, M. J.
Novel emulsions with a nanostructured continuous phase have been proposed as controlled drug delivery systems to enhance topical delivery of active ingredients avoiding systemic effects. In this study, oil-in-water (O/W) emulsions with two surfactant/water (S/W) weight ratios of 40:60 and 35:65, and oil concentrations of 10wt% (diluted emulsion), 40wt% (concentrated emulsion) and 85wt% (highly concentrated emulsion) have been investigated to identify the presence of liquid crystalline structures and their influence on drug release and skin permeation. The emulsions have been characterized in terms of visual appearance, rheology and drug release. The presence of cubic liquid crystalline structures in emulsions with S/W 40:60 was confirmed by small angle X-ray scattering (SAXS). Rheology results showed a markedly different behaviour in emulsions with S/W 40:60 compared with nonstructured emulsions. A model drug, diclofenac sodium (DS) was successfully incorporated in the emulsions. DS release was studied with hydrophilic and lipophilic membranes, and the amount of DS in the receptor solution was significantly lower in the formulations containing cubic liquid structures. An in vitro skin permeation study with dermatomed human skin showed that emulsions with a nanostructured continuous phase are suitable formulations for topical delivery with DS retention in skin layers. The results indicate that the amount of drug retained in skin structures may be tuned by modification of liquid crystal concentration and emulsion structure., Characterization has been performed in the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Center (CIBER-BBN). Financial support from Spanish Ministry of Economics and Competitivity, MINECO (Grant CTQ 2016-80645-R) and from the Generalitat de Catalunya (Grant 2017SGR-1778 and DI-060) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation and stabilization of multiple water-in-water-in-water (W/W/W) emulsions

  • Beldengrün, Yoran
  • Dallaris, V.
  • Jaén, C.
  • Protat, R.
  • Miras Hernández, Jonathan
  • Calvo, M.
  • García-Celma, M. J.
  • Esquena, Jordi
Multiple Water-in-Water-in-Water (W/W/W) emulsions were prepared, stabilized and characterized. The main objective was to find a simple and low-cost method for the preparation of W/W/W emulsions. The system composed of gelatin, maltodextrin and water was used, and two different methods were studied for producing multiple emulsions in this system. In the first method, maltodextrin-in-gelatin (M/G) emulsions with small droplet size were formed by pH-induced nucleation of maltodextrin droplets, and afterwards, maltodextrin-in-gelatin-in-maltodextrin (M/G/M) multiple emulsions were obtained by dispersing M/G droplets into maltodextrin solutions. The second method consisted in cooling down gelatin-in-maltodextrin (G/M) emulsions, leading to the spontaneous formation of inner maltodextrin droplets. The latter method allowed producing more homogenous M/G/M multiple emulsion droplets. The colloidal stability of such emulsions greatly improved with the addition of mucin particles, which is a glycoprotein that adsorbs on the G/M interface. Stable M/G/M multiple emulsions have been prepared and characterized by fluorescence optical microscopy, where contrast has been enhanced through covalently labelling the various components with fluorescent dyes. To our knowledge, this is the first report of a simple and cost-effective method for the production of multiple W/W/W emulsions, without using microfluidic techniques. Moreover, the present work also demonstrates that mucin microparticles can be effective stabilizers for protein-in-polysaccharide emulsions, and these dispersions can be easily prepared by phase transition methods., The authors greatly acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness (CTQ2017-84998-P and CTQ2016-80645-R projects) and Marie Sklodowska Curie Initial Training Networks (FP7-PEOPLE-2013-ITN-606713, BIBAFOODS project). Support from Generalitat de Catalunya (2017SGR1778 and TECCIT15-1-0009) and Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), is also acknowledged. The authors also acknowledge the “Grupo de Nanotecnología Farmacéutica”, of the University of Barcelona (UB), in the Faculty of Pharmacy, which forms an Associated Unit to CSIC. Authors are also very grateful to the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER), which provides support to these government programs.Characterization, except Confocal Microscopy, have been performed by the Nanostructured Liquid Characterization Unit, located at the Institute of Advanced Chemistry of Catalonia (IQAC), belonging to the Spanish National Research Council (CSIC) and affiliated to the NANBIOSIS ICTS of the Biomedical Networking Centre (CIBER-BBN), which is financed by Instituto de Salud Carlos III. Laser Confocal Optical Microscopy was performed at the Advanced Optical Microscopy Unit of the Scientific and Technological Centres of University of Barcelona. The authors also greatly thank Carlos Rodríguez-Abreu and Conxita Solans (IQAC-CSIC), and Allan Mackie and Josep Bonet (Universitat Rovira i Virgili, Spain) for very useful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PLGA cationic nanoparticles, obtained from nano-emulsion templating, as potential DNA vaccines

  • Soler Besumbes, Eduard
  • Fornaguera, Cristina
  • Monge, Marta
  • García-Celma, M. J.
  • Carrión, Javier
  • Solans, Conxita
  • Dols-Pérez, Aurora
Polymeric nanoparticles offer advantageous characteristics as gene-delivery vectors such as biocompatibility and biodegradability. With this aim, a smart and innovative strategy was followed here: Cationic PLGA nano-emulsions, prepared by a low energy method, were used as templates to obtain cationic nanoparticles (NPs) able to easily complex with nucleic acids (i.e. plasmid DNA) by electrostatic interactions. The strategy employed to produce stable positively-charged nanoparticles was the use of non-ionic/cationic surfactant mixtures to stabilize template nano-emulsions. This methodology allowed obtaining nanoparticles with reproducible nanometric sizes and positive zeta potential values, appropriate to successfully complex with nucleic acids, resulting in nanometric spherical polyplexes. Nanoparticles, plasmids and polyplexes proved to be biocompatible at the optimal concentration. Therefore, we can conclude that we have designed a novel strategy to efficiently obtain cationic polymeric nanoparticles that can be a promising approach to act as novel non-viral gene-delivery vectors, useful for many applications in gene therapy, such as gene vaccines. © 2019 Elsevier Ltd, Financial support from MINECO (grants CTQ2016-80645-R and CTQ2017-84998-P); Generalitat de Catalunya (grants 2014SGR1655 and 2017SGR1778), and CIBER-BBN are acknowledged. CIBER-BBN is an initiative funded by the Spanish National Plan for Scientific and Technical Research and Innovation 2013–2016, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Dr. Cristina Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012) and to MINECO for their Torres Quevedo Postdoctoral Fellowship(grant PTQ 2015). Authors thank the access to the facilities of TEM-SEM Casanova unit of the Centres Científics i Tecnològics (CCiTUB) of the University of Barcelona (UB) and its staff members for their technical advice., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Short and ultrashort antimicrobial peptides anchored onto soft commercial contact lenses inhibit bacterial adhesion

  • Salvagni, Emiliano
  • García, Clara
  • Manresa, Ángeles
  • Müller-Sánchez, Claudia
  • Reina, Manuel
  • Rodríguez-Abreu, Carlos
  • García-Celma, M. J.
  • Esquena, Jordi
Commercial soft contact lenses were chemically modified to incorporate antibacterial properties. Contact lenses and especially soft contact lenses present a risk of eye microbial infection that eventually may lead to vision loss. This is a significant health issue given the large population of contact lenses wearers worldwide. In order to introduce bactericidal activity in hydrogel contact lenses, one short and one ultrashort antimicrobial peptides, LKKLLKLLKKLLKL (LK) and IRIRIRIR (IR), were selected. These peptides were anchored on the surface of contact lenses using a linker (1,4-butanediol diglycidyl ether) under mild conditions (room temperature, pH = 7.4). Physical and chemical properties of peptide-functionalized contact lenses were investigated through several analytical techniques including wettability, Raman confocal microscopy, fluorescence studies, refractometry and spectrophotometry. These studies demonstrated that contact lens modification occurred at the nanolevel (ng/lens). Bacterial cultures showed that peptide-functionalized contact lenses can drastically reduce bacterial adhesion and viability when exposed to Pseudomonas aeruginosa and Staphylococcus aureus. These systems offer the potential to minimise corneal bacterial infection and represent a suitable platform for future ophthalmic devices., The authors greatly acknowledge financial support from Generalitat de Catalunya (Tecnospring Program, TECSPR14-2-0044, and Consolidated Group 2017SGR1778), and from the Spanish Ministry of Science, Innovation and Universities (CTQ2017-84998-P and CTQ2016-80645-R). The authors are also very grateful to Agencia Estatal de Investigación and to the European Regional Development Fund. Support and collaboration received from the Iberian Nanotechnology Laboratory (Portugal) is acknowledged. The authors also acknowledge the “Grupo de Nanotecnología Farmacéutica”, of the University of Barcelona (UB), in the Faculty of Pharmacy and Food Sciences, which forms an Associated Unit to CSIC. Functionalized contact lenses were developed at the Institute of Advanced Chemistry of Catalonia (IQAC-CSIC), and characterization of contact lenses was carried out at the International Iberian Nanotechnology Laboratory (INL), in Braga, Portugal. The support provided by Yury Kolen'ko (INL) is acknowledged. Inhibition of bacteria was performed at the Section of Microbiology of the Biology, Health and Environment Department of the Faculty of Pharmacy, and cytotoxicity determinations were performed at the CellTec unit of the Faculty of Biology, both in the University of Barcelona. Refractive indices were measured in University of Minho (Braga, Portugal), with guidance from Madalena Lira. Raman Spectroscopy was performed in INL (Braga, Portugal), with assistance by Maria de Fátima Guimarães Cerqueira. Optical microscopy observations were carried out at the Nanostructured Liquid Characterization Unit, in the Institute of Advanced Chemistry of Catalonia (IQAC), of the Spanish National Research Council (CSIC), which is affiliated to the NANBIOSIS ICTS of the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cell penetrating peptide grafting of PLGA nanoparticles to enhance cell uptake

  • Feiner-Gracia, Natalia
  • Dols-Pérez, Aurora
  • Royo, Miriam
  • Solans, Conxita
  • García-Celma, M. J.
  • Fornaguera, Cristina
Polymeric nanoparticles emerged a few decades ago and since then, their use and research has experienced an exponential increase, especially in the biomedical field. Among the methods to prepare polymeric nanoparticles, nano-emulsion templating is advantageous in terms of versatility, robustness, safety and efficiency. The current study represents a proof of concept of the versatility and robustness of this method for the formation of dell penetrating peptide (CPP) – functionalized PLGA nanoparticles able to efficiently cross plasma membrane and release their cargo inside the cell, where most active principles must perform their therapeutic activity. First, PLGA nano-emulsions were prepared by the phase inversion composition method, in mild conditions, required for labile pharmaceutical actives and without the need of purification steps, thus being appropriate for pharmaceutical purposes. Once nanoparticles are formed, they are functionalized, a posteriori, with a model CPP; procedure advantageous to preserve CPP functionality. It is worth noting that these nanoparticles showed smaller sizes than most PLGA nanoparticles reported previously elsewhere, property advantageous in terms of in vivo use. CPP covalent post-attachment promoted efficient nanoparticle uptake allowing them to efficiently cross plasmatic cell membranes, a bottleneck step for many nanosystems. Crossing plasmatic cell membrane was overcome with our CPP-functionalized nanoparticles, as confirmed by confocal microscopy studies. Thus, nanoparticles prepared by nano-emulsion templating can be considered a promising alternative to design novel efficient nanotherapies for multiple therapeutic purposes., Financial support from Spanish Ministry of Economy and Competitivity, MINECO (grant CTQ2014-52687, CTQ2016-80645-R and SAF-2014-60138-R) and Generaltitat de Catalunya (grant 2014-SGR-1655, 2014-SGR-137, and 2017-SGR-1439) is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. C. Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012) and to MINECO for their Postdoctoral Fellowship (grant PTQ2015) and N. Feiner-Gracia is grateful to CIBER-BBN for their starting grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hyaluronan based materials with catanionic sugar-derived surfactants as drug delivery systems

  • Roig-Roig, Ferrán
  • Blanzat, M.
  • Solans, Conxita
  • Esquena, Jordi
  • García-Celma, M. J.
In the present work novel drug delivery systems consisting in highly porous Hyaluronan foams for the administration of a non-steroidal anti-inflammatory drug (NSAID), ketoprofen, have been obtained. A sugar-derived surfactant associated with ketoprofen was prepared and incorporated into the porous hyaluronan materials. The association between a lactose derived surfactant, Lhyd12, and ketoprofen was obtained by acid-base reaction and its physicochemical properties were studied. Tensiometric and dynamic light scattering (DLS) determinations showed the formation of catanionic surfactant aggregates, Lhyd12/ketoprofen, in aqueous solution. Furthermore, the catanionic surfactants allowed greater solubilisation of ketoprofen. Hyaluronan porous materials were developed using butanediol diglycidyl ether as crosslinking agent. The profile release of Lhyd12/ketoprofen from hyaluronan based materials shows differences as a function of the aggregation state of catanionic surfactant., The authors wish to acknowledge the sponsorship of the Spanish Ministry of Economy and Competitivity (CTQ2016-80645-R and CTQ2014-52687-C-1-P) and Generalitat de Catalunya (Grant 2014SGR1655)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of crosslinked alginate on drug release from highly concentrated emulsions

  • Bonilla, Pablo
  • Arias, Eva María
  • Solans, Conxita
  • García-Celma, M. J.
Biocompatible water-in-oil (W/O) and oil-in-water (W/O) highly concentrated emulsions (HIPREs) have been formed at 25 °C, in systems consisting of aqueous component/castor oil derivative surfactant/oil compound. In both kinds of emulsions the concentration of internal phase was 83% and the aqueous component consisted of water, 1% sodium alginate solution or a mixture of sodium alginate solution and calcium chloride solution (crosslinked calcium alginate). Ketoprofen (KP) or clindamycine hydrochloride (CH) were solubilized in both kinds of HIPREs and the influence of the composition of the aqueous phase on drug release was studied. Droplet sizes of the W/O HIPREs formed were in the nanometric range, being smaller than other HIPREs described in the literature. Dynamic viscoelastic measurements showed an increase in the elastic modulus (G’) of the emulsions in the presence of alginate or crosslinked alginate. The influence of the order of incorporation of alginate and calcium chloride on the viscosity was demonstrated, as an indication of crosslinking efficiency. KP release to a PBS receptor solution was slower when crosslinked alginate was formed in the internal phase of W/O HIPREs. In contrast, the influence of crosslinked alginate on the release of CH was negligible and the solubility of the drug in the disperse phase demonstrated to be the main mechanism responsible of CH diffusion. The results obtained suggest that the formation of a crosslinked alginate matrix in the internal phase of HIPREs is a factor that has to be taken into account in the development of controlled drug delivery systems., Financial support from Generalitat de Catalunya (grant 2014SGR1655) and MINECO (grant CTQ2016-80645-R) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of polymer concentration on the properties of nano-emulsions and nanoparticles obtained by a low-energy method

  • Homs, Maria
  • Calderó, Gabriela
  • Monge, Marta
  • Morales, Daniel
  • Solans, Conxita
This study concerns the effect of polymer content on the properties of nano-emulsions formulated by the PIC low-energy method and on the nanoparticles prepared from nano-emulsions by solvent evaporation. The region of nano-emulsion formation, droplet size and stability as a function of polymer content were investigated. Nano-emulsions were formed in a wide range of oil-to-surfactant weight ratios (Ros) and water contents higher than 45%. For nanoparticles, droplet size, stability, encapsulation efficiency, pH, drug release and cytotoxicity effect were evaluated as a function of polymer content. Nano-emulsion droplet size (Rh = 8–75 nm) and nanoparticle size (Rh = 8–55 nm) increase with the polymer content. No desestabilization process such as creaming or sedimentation was observed by light transmittance/backscattering neither in nano-emulsions nor in nanoparticle dispersions. The morphology and size of nano-emulsions and nanoparticles were comfirmed by Cryo-TEM and TEM techniques, respectively. The pH of nanoparticle dispersions was in the range of 5–6.5 during the studied experimental time (7days), an indication of no polymer degradation. Moreover, Dexamethasone (DXM) encapsulated in the polymeric nanoparticles (0.18 wt% DXM in the oil phase of the template nano-emulsion) did not modify the nanoparticle size. No effect of polymer concentration was found in the encapsulation efficiency (close to 90%) of DXM. In vitro drug release studies indicated Fick's diffusion as the main drug release mechanism from the nanoparticle to the receptor solution. DXM loaded and non-loaded nanoparticles showed cell viability higher than 70%. This study reports a promising system to be used as template for polymeric nanoparticle preparation suitable for biomedical applications., Financial support from Spanish Ministry of Economics and Competitivity, MINECO (grants CTQ 2014-52687-C3-1-P and CTQ 2016-80645-R) and Generalitat de Catalunya (grant 2014SGR-1655) is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Versatile Methodology to Encapsulate Gold Nanoparticles in PLGA Nanoparticles Obtained by Nano-Emulsion Templating

  • Fornaguera, Cristina
  • Feiner-Gracia, Natalia
  • Dols-Pérez, Aurora
  • García-Celma, M. J.
  • Solans, Conxita
[Purpose] Gold nanoparticles have been proved useful for many biomedical applications, specifically, for their use as advanced imaging systems. However, they usually present problems related with stability and toxicity., [Methods] In the present work, gold-nanoparticles have been encapsulated in polymeric nanoparticles using a novel methodology based on nano-emulsion templating. Firstly, gold nanoparticles have been transferred from water to ethyl acetate, a solvent classified as class III by the NIH guidelines (low toxic potential). Next, the formation of nano-emulsions loaded with gold nanoparticles has been performed using a low-energy, the phase inversion composition (PIC) emulsification method, followed by solvent evaporation giving rise to polymeric nanoparticles., [Results] Using this methodology, high concentrations of gold nanoparticles (>100 pM) have been encapsulated. Increasing gold nanoparticle concentration, nano-emulsion and nanoparticle sizes increase, resulting in a decrease on the stability. It is noteworthy that the designed nanoparticles did not produce cytotoxicity neither hemolysis at the required concentration., [Conclusions] Therefore, it can be concluded that a novel and very versatile methodology has been developed for the production of polymeric nanoparticles loaded with gold nanoparticles., inancial support from MINECO (grants CTQ2014-52687-C3-1-P and CTQ2016-80645-R); Generalitat de Catalunya (grant 2014-SGR-1655), and CIBER-BBN are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Cristina Fornaguera is grateful to AGAUR for their Predoctoral Fellowship (grant FI-DGR 2012)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Ultrasound-induced microbubble formation in perfluorohexane nanoemulsions for blood brain barrier opening

  • Calderó, Gabriela
  • Rodríguez-Abreu, Carlos
  • González, A.
  • Monge, Marta
  • García-Celma, M. J.
  • Solans, Conxita
Trabajo presentado en la XII Spanish-Portuguese Conference on Controlled Drug Delivery "Tailoring drug delivery system to the patients' needs", celebrada en Coimbra (Portugal), entre el 14 y el 16 de enero de 2018., [Introduction] Recently, it has been shown that microbubbles (MB) can be used to open the blood-brain barrier (BBB) in a noninvasive, reversible and local manner when stimulated by focused ultrasound (FUS) [1]. In this context, perfluorohexane (PFH) nano-emulsions may constitute an advantageous approach. PFH is liquid at body temperature and shows interesting properties such as echogenicity, high oxygen carrying ability and extremely low solubility in aqueous media, including blood [2,3]. The formulation of PFH in O/W nano-emulsions allows intravenous administration and facilitates PFH droplets reaching fine brain capillaries, where they may undergo a phase transition to microbubble formation upon in situ activation with focused ultrasounds (FUS), thus contributing to loosening the tight junctions of brain capillaries endothelial cells. In this study, the incorporation of PFH into polymeric nano-emulsions prepared by a low-energy method has been investigated, as well as its use for the preparation of PFH-loaded nanocapsules as microbubble precursors., [Materials and Methods] MATERIALS: Perfluorohexane (PFH); PLGA (MW ≈ 10.000 g/mol), ethyl acetate, nonionic surfactant (HLB = 15), Apolar Low Density Oil (ALDO), phosphate buffered saline (pH=7.4; 0.16M and 0.33 M). METHODS: Nano-emulsions were prepared by the phase inversion composition (PIC) method. Nanocapsules were obtained from the nano-emulsions by dialysis against PBS. Nano-emulsions and nanocapsules were characterized by Dynamic Light Scattering (DLS), Enhanced Dark Field Microscopy (EDFM), and Transmission Electron Microscopy (TEM). Nano-emulsion stability was assessed by light transmission and backscattering (Turbiscan Lab Expert) at 25ºC. PFH in the nanocapsules was determined by elemental fluor microanalysis and hyperspectral mapper classification of hyperspectral images of NC. Biocompatiblity of the nanocapsules was assessed by means of MTT assay., [Results and Discussion] PFH nano-emulsions were obtained at high oil-to-surfactant ratios with hydrodynamic droplet sizes typically below 300 nm. The incorporation of the PFH in the oil component of the polymeric nano-emulsion dramatically decreases its stability against sedimentation, but this can be improved by the addition of apolar low-density oil. The PFH nanoemulsions were used as templates for the preparation of PFH-loaded polymeric nanocapsules (NC) using a dialysis method. The as-obtained NC show globular shape and sizes below 250 nm by DLS, smaller than the corresponding template nano-emulsion. Successful PFH encapsulation in the NC has been evidenced by VNIR spectral angle mapper classification of hyperspectral images of single NC as well as F elemental microanalysis. Cytotoxicity tests suggest that loading of PFH in the NC does not produce a cytotoxic effect, while ALDO has a negative impact on cell viability. Further, preliminary assays suggest that the as-prepared PFH-loaded NC are promising MB precursors for FUS-assisted BBB opening., [Conclusions] PFH was successfully incorporated in polymeric nano-emulsions (NE) prepared by a PIC method. PFH-loaded NC have been obtained from NE by dialysis. The addition of an apolar low density oil into the oil component of the nanoemulsion improves the stability of the PFH nano-emulsion but has a negative impact on the biocompatibility of the NC. The as prepared PFH-loaded NC are promising MB precursors for FUS-assisted BBB opening., CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011. Financial support from Spanish Ministry of Economics and Competitivity, MINECO (grants CTQ2014-52687-C3-1-P and CTQ 2016-80645-R) and Generalitat de Catalunya (grant 2014SGR-1655) is acknowledged., Peer reviewed