Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Induced damage during STEM-EELS analyses on acrylic-based materials for Stereolithography

  • Valencia Liñán, Luisa María
  • Mata Fernández, María de la
  • Herrera Collado, Miriam
  • Delgado González, Francisco Javier
  • Hernández Saz, Jesús
  • Molina Rubio, Sergio Ignacio
(Scanning) transmission electron microscopy, (S)TEM, offers a powerful characterization tool based on electronmatter interactions, highly valuable in materials science. However, the possible electron beam induced damage during (S)TEM measurements hinders the analysis of soft materials, such as acrylic resins. Importantly, acrylic resins offer an appealing playground for the development of novel composites with customized properties and convenient processing capabilities for 3D-printing technologies, including Stereolithography (SLA). There are several factors preventing the optimal performance of TEM measurements applied to acrylic resins, among which we focus on the quality of the analyzed specimen (i.e., compromise between thickness and robustness, to achieve electron transparency while keeping the material integrity), particularly challenging when working with soft materials; the electrostatic charging/discharging effects, resulting in sample drift and related noise/artefacts; and the radiolysis and knock-on electron-induced damage, which directly degrade the material under study. We explore and compare different methodologies to obtain resin specimens suitable for (S)TEM analysis, employed for the subsequent study of the electron–beam damage induced during STEM-EELS measurements. Furthermore, we propose likely underlying mechanisms explaining the acrylic resin degradation based on the different EELS monitored signals. On one hand, we assess the evolution of the carbon and oxygen content, as well as the material thinning as a function of the accumulated electron dose. On the other hand, we extract meaningful information from the spectral shape of carbon and oxygen K-edges upon increasing electron doses, unraveling likely degradation pathways. The earned understanding on the electron-beam induced damage and the determination of critical doses provide a useful framework for the implementation of (S)TEM techniques as useful tools to help in the smart engineering of acrylic-based composites for SLA.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

STEM Tools for Semiconductor Characterization: Beyond High-Resolution Imaging

  • Mata Fernández, María de la
  • Molina Rubio, Sergio Ignacio
The smart engineering of novel semiconductor devices relies on the development of optimized functional materials suitable for the design of improved systems with advanced capabilities aside from better efficiencies. Thereby, the characterization of these materials at the highest level attainable is crucial for leading a proper understanding of their working principle. Due to the striking effect of atomic features on the behavior of semiconductor quantum- and nanostructures, scanning transmission electron microscopy (STEM) tools have been broadly employed for their characterization. Indeed, STEM provides a manifold characterization tool achieving insights on, not only the atomic structure and chemical composition of the analyzed materials, but also probing internal electric fields, plasmonic oscillations, light emission, band gap determination, electric field measurements, and many other properties. The emergence of new detectors and novel instrumental designs allowing the simultaneous collection of several signals render the perfect playground for the development of highly customized experiments specifically designed for the required analyses. This paper presents some of the most useful STEM techniques and several strategies and methodologies applied to address the specific analysis on semiconductors. STEM imaging, spectroscopies, 4D-STEM (in particular DPC), and in situ STEM are summarized, showing their potential use for the characterization of semiconductor nanostructured materials through recent reported studies., This work has been co-financed by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and the University of the Regional Government of Andalusia. (FEDER-UCA18-106586). Co-funding from Junta de Andalucia (Research group INNANOMAT, ref. TEP-946) and UE is also acknowledged.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Synthesis of Silver Nanocomposites for Stereolithography: In Situ Formation of Nanoparticles

  • Valencia Liñán, Luisa María
  • Mata Fernández, María de la
  • Sanz de León, Alberto
  • Delgado González, Francisco Javier
  • Molina Rubio, Sergio Ignacio
Additive Manufacturing (AM) offers remarkable advantages in relation to traditional methods used to obtain solid structures, such as the capability to obtain customized complex geometries adapted to individual requirements. The design of novel nanocomposites suitable for AM is an excellent strategy to widen the application field of these techniques. In this work, we report on the fabrication of metal/polymer nanocomposites with enhanced optical/electrical behaviour for stereolithography (SLA). In particular, we analyse the in situ generation of Ag nanoparticles (NPs) from Ag precursors (AgNO3 and AgClO4) within acrylic resins via SLA. Transmission electron microscopy (TEM) analysis confirmed the formation of Ag NPs smaller than 5 nm in all nanocomposites, providing optical activity to the materials. A high density of Ag NPs with a good distribution through the material for the larger concentration of AgClO4 precursor tested was observed, in contrast to the isolated agglomerations found when the precursor amount was reduced to 0.1%. A significant reduction in the electrical resistivity up to four orders of magnitude was found for this material compared to the unfilled resin. However, consumption of part of the photoinitiator in the formation process of the Ag NPs contributed to a reduction in the polymerization degree of the resin and, consequently, degraded the mechanical properties of the nanocomposites. Experiments with longer curing times showed that, for the higher AgClO4 concentrations tested, post-curing times of 300 min allowed an 80% degree of polymerization to be achieved. These conditions turned these materials into promising candidates to obtain solid structures with multifunctional properties., This work has been co-financed by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (Ref: FEDER-UCA18-106586). Co-funding from UE and Junta de Andalucia (research group INNANOMAT, ref. TEP946) are also acknowledged. L. M. Valencia thanks FPI UCA Program. A.S. de Leon acknowledges Ministry of Science, Innovation and Universities for his Juan de la Cierva Incorporacion postdoctoral fellowship (IJC2019-041128-I). TEM/STEM measurements were carried out at the DME-SC-ICyT-ELECMI-UCA.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Stereolithography of Semiconductor Silver and Acrylic-Based Nanocomposites

  • Valencia Liñán, Luisa María
  • Herrera Collado, Miriam
  • De la Mata Fernández, María
  • Hernández Saz, Jesús
  • Romero Ocaña, Ismael
  • Delgado González, Francisco Javier
  • Benito, Javier
  • Molina Rubio, Sergio Ignacio
Polymer nanocomposites (PNCs) attract the attention of researchers and industry because of their potential properties in widespread fields. Specifically, electrically conductive and semiconductor PNCs are gaining interest as promising materials for biomedical, optoelectronic and sensing applications, among others. Here, metallic nanoparticles (NPs) are extensively used as nanoadditives to increase the electrical conductivity of mere acrylic resin. As the in situ formation of metallic NPs within the acrylic matrix is hindered by the solubility of the NP precursors, we propose a method to increase the density of Ag NPs by using different intermediate solvents, allowing preparation of Ag/acrylic resin nanocomposites with improved electrical behaviour. We fabricated 3D structures using stereolithography (SLA) by dissolving different quantities of metal precursor (AgClO4) in methanol and in N,N-dimethylformamide (DMF) and adding these solutions to the acrylic resin. The high density of Ag NPs obtained notably increases the electrical conductivity of the nanocomposites, reaching the semiconductor regime. We analysed the effect of the auxiliary solvents during the printing process and the implications on the mechanical properties and the degree of cure of the fabricated nanocomposites. The good quality of the materials prepared by this method turn these nanocomposites into promising candidates for electronic applications.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Printable Graphene Oxide Nanocomposites as Versatile Platforms for Immobilization of Functional Biomolecules

  • Sanz de León, Alberto
  • Mata Fernández, María de la
  • Delgado González, Francisco Javier
  • Molina Rubio, Sergio Ignacio
A series of novel nanocomposites containing graphene oxide (GO) suitable for stereolithography is presented. Different loads of GO are tested, identifying that these materials can be printed with concentrations up to 2.5 wt% GO, presenting improved mechanical properties for concentrations below 1.0 wt% GO. In this range, the nanocomposites exhibit higher strength and toughness when compared to the pristine resin. Microscopic analyses of the material demonstrate that this can be correlated with the good compatibility of GO with the resin, which favors its homogeneous dispersion in the form of flexible nanoplates. After manufacturing, the availability of GO to participate in surface modification reactions with chitosan (CHI) and an alkaline phosphatase (ALP) is evaluated. CHI and ALP are well-known to act as biological cues in biorecognition processes, evidencing that these nanocomposites are suitable as platforms for selective immobilization of functional biomolecules., This work was funded by the Ministry of Science, Innovation and Universities (TEC2017-86102-C2-2-R), the 2014-2020 ERDF Operational Programme and the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (FEDER-UCA18-106586). Co-funding from UE and the research group INNANOMAT (ref. TEP-946) is also acknowledged. A.S.d.L. and M.d.l.M. acknowledge Ministry of Science, Innovation and Universities for their Juan de la Cierva Incorporacion postdoctoral fellowships (IJC2019-041128-I, IJCI-2017-31507). SEM and TEM measurements were carried out at the DME-SC-ICyT-ELECMI-UCA.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Plasmonic Characterization of 3D Printable Metal-Polymer Nanocomposites

  • Mata Fernández, María de la
  • Sanz de León, Alberto
  • Valencia Liñán, Luisa María
  • Molina Rubio, Sergio Ignacio
Plasmonic polymer nanocomposites (i.e., polymer matrices containing plasmonic nanostructures) are appealing candidates for the development of manifold technological devices relying on light-matter interactions, provided that they have inherent properties and processing capabilities. The smart development of plasmonic nanocomposites requires in-depth optical analyses proving the material performance, along with correlative studies guiding the synthesis of tailored materials. Importantly, plasmon resonances emerging from metal nanoparticles affect the macroscopic optical response of the nanocomposite, leading to far- and near-field perturbations useful to address the optical activity of the material. We analyze the plasmonic behavior of two nanocomposites suitable for 3D printing, based on acrylic resin matrices loaded with Au or Ag nanoparticles. We compare experimental and computed UV-vis macroscopic spectra (far-field) with single-particle electron energy loss spectroscopy (EELS) analyses (near-field). We extended the calculations of Au and Ag plasmon-related resonances over different environments and nanoparticle sizes. Discrepancies between UV-vis and EELS are dependent on the interplay between the metal considered, the surrounding media, and the size of the nanoparticles. The study allows comparing in detail the plasmonic performance of Au- and Ag-polymer nanocomposites, whose plasmonic response is better addressed, accounting for their intended applications (i.e., whether they rely on far- or near-field interactions).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Self-Assembly of CsPbBr3Perovskites in Micropatterned Polymeric Surfaces: Toward Luminescent Materials with Self-Cleaning Properties

  • Sanz de León, Alberto
  • Mata Fernández, María de la
  • Sanchez-Alarcon, Ivan R.
  • Abargues, Rafael
  • Molina Rubio, Sergio Ignacio
In this work, we present a series of porous, honeycomb-patterned polymer films containing CsPbBr3 perovskite nanocrystals as light emitters prepared by the breath figure approach. Microscopy analysis of the topography and composition of the material evidence that the CsPbBr3 nanocrystals are homogeneously distributed within the polymer matrix but preferably confined inside the pores due to the fabrication process. The optical properties of the CsPbBr3 nanocrystals remain unaltered after the film formation, proving that they are stable inside the polystyrene matrix, which protects them from degradation by environmental factors. Moreover, these surfaces present highly hydrophobic behavior due to their high porosity and defined micropatterning, which is in agreement with the Cassie-Baxter model. This is evidenced by performing a proof-of-concept coating on top of 3D-printed LED lenses, conferring the material with self-cleaning properties, while the CsPbBr3 nanocrystals embedded inside the polymeric matrix maintain their luminescent behavior., This work was funded by the Ministry of Science, Innovation and Universities (project TEC2017-86102-C2-2-R) and Junta de Andalucía (Research group INNANOMAT, ref. TEP-946) and co-financed by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (ref: FEDER-UCA18-106586). Co-funding from UE is also acknowledged. A.S.d.L. acknowledges the Ministry of Science, Innovation and Universities for his Juan de la Cierva Incorporación postdoctoral fellowship (IJC2019-041128-I). R.A. also acknowledges the support of the Spanish MINECO through projects: Retos-Colaboración 2016 Project Safetag (no. RTC-2016-5197-2) and Retos de la Sociedad Project Nirvana (no. PID2020-119628RB-C31) by MCIN/AEI/10.13039/ 501100011033 and the “Agencia Valenciana de la Innovació” for the Valorització 2018 Project Hidronio (no. INNVAL10/ 18/032) and Valorització 2021 Project CATIOX (no. INNVA1/2021/56). R.A. also thanks the Spanish MINECO for their Ramón y Cajal Fellowship (no. RYC-2015-18349). SEM and TEM measurements were carried out at the DME-SCICyT- ELECMI-UCA.