Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Experimental evaluation of the injection force exerted in intraocular lens delivery with syringe-type injectors

  • Cabeza-Gil, I.
  • Ríos-Ruiz, I.
  • Calvo, B.
The process of intraocular lens (IOL) delivery within the capsular bag during cataract surgery is crucial, as the integrity of the IOL, the injector and the ocular structures should be preserved at all times. This study aims to obtain the main parameters that affect the injection force exerted in the ejection of an intraocular lens (IOL) through syringe-type injectors. For that purpose, ejection tests were carried out in vitro, measuring the resistance force throughout the entire delivery process. The effect of IOL material, haptic design, IOL thickest area and ophthalmic viscosurgical device (OVD) was studied by ejecting seven IOLs with four syringe-type injectors of different sizes, 3.0, 2.2 and 1.8 mm. In all injectors, plate hydrophilic IOLs present the lowest resistance forces; hydrated C-loop hydrophobic IOLs present higher forces and the C-loop hydrophobic IOL in dry conditions presents the highest resistance forces. All IOLs could be properly delivered with an injector size of 2.2 mm, making injector sizes of 3.0 mm outdated. The injector size of 1.8 mm damaged several IOLs. IOL material and cartridge nozzle size were the most influential parameters in IOL delivery. IOL thickest area was also relevant but in a lesser extent whereas IOL haptic design was not as relevant.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mechanical characterisation of hydrophobic and hydrophilic acrylates used in intraocular lenses through depth sensing indentation

  • Cabeza-Gil, I.
  • Calvo, B.
  • Rico, A.
  • Reinhards-Hervás, C.
  • Rodríguez, J.
In this work, the mechanical behaviour of hydrophilic and hydrophobic acrylates has been characterised by depth sensing indentation. Time-dependent behaviour has been studied using load-relaxation tests. Experiments have been simulated with a finite element software using a visco-hyperelastic material model. The parameters of this model have been determined using deep learning techniques. The developed material models have been used to mechanically simulate a standard compression test of a prototype intraocular lens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of material and haptic design on the mechanical stability of intraocular lenses by means of finite-element modeling

  • Remón, L.
  • Siedlecki, D.
  • Cabeza-Gil, I.
  • Calvo, B.
Intraocular lenses (IOLs) are used in the cataract treatment for surgical replacement of the opacified crystalline lens. Before being implanted they have to pass the strict quality control to guarantee a good biomechanical stability inside the capsular bag, avoiding the rotation, and to provide a good optical quality. The goal of this study was to investigate the influence of the material and haptic design on the behavior of the IOLs under dynamic compression condition. For this purpose, the strain-stress characteristics of the hydrophobic and hydrophilic materials were estimated experimentally. Next, these data were used as the input for a finite-element model (FEM) to analyze the stability of different IOL haptic designs, according to the procedure described by the ISO standards. Finally, the simulations of the effect of IOL tilt and decentration on the optical performance were performed in an eye model using a ray-tracing software. The results suggest the major importance of the haptic design rather than the material on the postoperative behavior of an IOL. FEM appears to be a powerful tool for numerical studies of the biomechanical properties of IOLs and it allows one to help in the design phase to the manufacturers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Is location a significant parameter in the layer dependent dissection properties of the aorta?

  • Ríos-Ruiz, Itziar
  • Martínez, Miguel Ángel
  • Peña, Estefanía
Proper characterisation of biological tissue is key to understanding the effect of the biomechanical environment in the physiology and pathology of the cardiovascular system. Aortic dissection in particular is a prevalent and sometimes fatal disease that still lacks a complete comprehension of its progression. Its development and outcome, however, depend on the location in the vessel. Dissection properties of arteries are frequently studied via delamination tests, such as the T-peel test and the mixed-mode peel test. So far, a study that performs both tests throughout different locations of the aorta, as well as dissecting several interfaces, is missing. This makes it difficult to extract conclusions in terms of vessel heterogeneity, as a standardised experimental procedure cannot be assured for different studies in literature. Therefore, both dissection tests have been here performed on healthy porcine aortas, dissecting three interfaces of the vessels, i.e., the intima-media, the media-adventitia and the media within itself, considering different locations of the aorta, the ascending thoracic aorta (ATA), the descending thoracic aorta and the infrarenal abdominal aorta (IAA). Significant differences were found for both, layers and location. In particular, dissection forces in the ATA were the highest and the separation of the intima-media interface required significantly the lowest force. Moreover, dissection in the longitudinal direction of the vessel generally required more force than in the circumferential one. These results emphasise the need to characterise aortic tissue considering the specific location and dissected layer of the vessel.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Role of Mechanical Properties and Structure of Type I Collagen Hydrogels on Colorectal Cancer Cell Migration

  • Castro-Abril, Hector
  • Heras, Jónathan
  • del Barrio, Jesús
  • Paz, Laura
  • Alcaine, Clara
  • Pérez Aliácar, Marina
  • Garzón-Alvarado, Diego
  • Doblaré, Manuel
  • Ochoa, Ignacio
Mechanical interactions between cells and their microenvironment play an important role in determining cell fate, which is particularly relevant in metastasis, a process where cells invade tissue matrices with different mechanical properties. In vitro, type I collagen hydrogels have been commonly used for modeling the microenvironment due to its ubiquity in the human body. In this work, the combined influence of the stiffness of these hydrogels and their ultrastructure on the migration patterns of HCT-116 and HT-29 spheroids are analyzed. For this, six different types of pure type I collagen hydrogels by changing the collagen concentration and the gelation temperature are prepared. The stiffness of each sample is measured and its ultrastructure is characterized. Cell migration studies are then performed by seeding the spheroids in three different spatial conditions. It is shown that changes in the aforementioned parameters lead to differences in the mechanical stiffness of the matrices as well as the ultrastructure. These differences, in turn, lead to distinct cell migration patterns of HCT-116 and HT-29 spheroids in either of the spatial conditions tested. Based on these results, it is concluded that the stiffness and the ultrastructural organization of the matrix can actively modulate cell migration behavior in colorectal cancer spheroids. Las interacciones mecánicas entre las células y su microambiente juegan un papel importante en la determinación del destino celular, lo cual es particularmente relevante en la metástasis, un proceso en el que las células invaden matrices tisulares con diferentes propiedades mecánicas. In vitro, los hidrogeles de colágeno tipo I se han utilizado comúnmente para modelar el microambiente debido a su ubicuidad en el cuerpo humano. En este trabajo se analiza la influencia combinada de la rigidez de estos hidrogeles y su ultraestructura en los patrones de migración de los esferoides HCT-116 y HT-29. Para ello se preparan seis tipos diferentes de hidrogeles de colágeno puro tipo I cambiando la concentración de colágeno y la temperatura de gelificación. Se mide la rigidez de cada muestra y se caracteriza su ultraestructura. Luego se realizan estudios de migración celular sembrando los esferoides en tres condiciones espaciales diferentes. Se muestra que los cambios en los parámetros antes mencionados conducen a diferencias en la rigidez mecánica de las matrices así como en la ultraestructura. Estas diferencias, a su vez, conducen a distintos patrones de migración celular de los esferoides HCT-116 y HT-29 en cualquiera de las condiciones espaciales probadas. Con base en estos resultados, se concluye que la rigidez y la organización ultraestructural de la matriz pueden modular activamente el comportamiento de migración celular en esferoides de cáncer colorrectal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring the muscle architecture effect on the mechanical behaviour of mouse rotator cuff muscles

  • Heras-Sádaba, A.
  • Pérez-Ruiz, A.
  • Martins, P.
  • Ederra, C.
  • Ortiz de Solórzano, C.
  • Abizanda, G.
  • Pons-Villanueva, J.
  • Calvo, B.
  • Grasa, J.
Incorporating detailed muscle architecture aspects into computational models can enable researchers to gain deeper insights into the complexity of muscle function, movement, and performance. In this study, we employed histological, multiphoton image processing, and finite element method techniques to characterise the mechanical dependency on the architectural behaviour of supraspinatus and infraspinatus mouse muscles. While mechanical tests revealed a stiffer passive behaviour in the supraspinatus muscle, the collagen content was found to be two times higher in the infraspinatus. This effect was unveiled by analysing the alignment of fibres during muscle stretch with the 3D models and the parameters obtained in the fitting. Therefore, a strong dependence of muscle behaviour, both active and passive, was found on fibre orientation rather than collagen content.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comprehensive experimental analysis of the local passive response across the healthy porcine left ventricle

  • Laita, Nicolás
  • Aparici-Gil, Alejandro
  • Oliván-Viguera, Aida
  • Pérez-Martínez, Alba
  • Martínez, Miguel Ángel
  • Doblaré, Manuel
  • Peña, Estefanía
This work provides a comprehensive characterization of porcine myocardial tissue, combining true biaxial (TBx), simple triaxial shear (STS) and confined compression (CC) tests to analyze its elastic behavior under cyclic loads. We expanded this study to different zones of the ventricular free wall, providing insights into the local behavior along the longitudinal and radial coordinates. The aging impact was also assessed by comparing two age groups (4 and 8 months). Resulting data showed that the myocardium exhibits a highly nonlinear hyperelastic and incompressible behavior. We observed an anisotropy ratio of 2-2.4 between averaged peak stresses in TBx tests and 1-0.59-0.40 orthotropy ratios for normalised fiber-sheet-normal peak stresses in STS tests. We obtained a highly incompressible response, reaching volumetric pressures of 2-7 MPa for perfused tissue in CC tests, with notable differences when fluid drainage was allowed, suggesting a high permeability. Regional analysis showed reduced stiffness and anisotropy (20-25%) at the apical region compared to the medial, which we attributed to differences in the fiber field dispersion. Compressibility also increased towards the epicardium and apical regions. Regarding age-related variations, 8-month animals showed stiffer response (at least 25% increase), particularly in directions where the mechanical stress is absorbed by collagenous fibers (more than 90%), as supported by a histological analysis. Although compressibility of perfused tissue remained unchanged, permeability significantly reduced in 8-month-old animals. Our findings offer new insights into myocardial properties, emphasizing on local variations, which can help to get a more realistic understanding of cardiac mechanics in this common animal model. Statement of significance: In this work, we conducted a comprehensive analysis of the passive mechanical behavior of porcine myocardial tissue through biaxial, triaxial shear, and confined compression tests. Unlike previous research, we investigated the variation in mechanical response across the left ventricular free wall, conventionally assumed homogeneous, revealing differences in terms of stiffness and compressibility. Additionally, we evaluated age-related effects on mechanical properties by comparing two age groups, observing significant variations in stiffness and permeability. To date, there has been no such in-depth exploration of myocardial elastic response and compressibility considering regional variations along the wall and may contribute to a better understanding of the cardiac tissue’s passive mechanical response.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

From Fiber Architecture to Functional Attachment: A Clinically Relevant, Mechanically Tunable Cardiac Patch

  • Braig, Johannes
  • Kent, Ross
  • Goienetxe, Ainitze Gereka
  • Laita, Nicolás
  • Wu, Ming
  • Martínez, Miguel Ángel
  • Serra, Margarida
  • Janssens, Koen
  • Urtaza, Uzuri
  • Larequi, Eduardo
  • Anaut-Lusar, Ilazki
  • Gillijns, Hilde
  • Algoet, Michiel
  • van Kerkhof, Britt
  • van der Knaap, Maite
  • Cedillo-Servin, Gerardo
  • Castilho, Miguel
  • van Mil, Alain
  • Sluijter, Joost P. G.
  • Malda, Jos
  • Claus, Piet
  • Bovendeerd, Peter H. M.
  • Peña, Estefanía
  • Doblare, Manuel
  • Oosterlinck, Wouter
  • Janssens, Stefan
  • Zaldua, Ane M.
  • Iglesias-García, Olalla
  • Prósper, Felipe
  • Vega, Manuel M. Mazo
  • Groll, Jürgen
  • Jüngst, Tomasz
Contractile engineered cardiac patches hold great potential for treating myocardial infarction, serving as biological ventricular assist devices (BioVADs). However, optimal design and attachment of cardiac patches remain insufficiently explored, although both are essential for the mechanical support of damaged hearts. This study presents a platform for personalized macroscale patches with a multi‐zonal microarchitecture combining a regenerative zone for cell alignment, a stiff force transmission zone for load transfer, and an elastic attachment zone enabling integration. Based on computational modeling, the design is implemented using a custom G‐code generator for melt electrowriting (MEW). Digital image correlation reveals up to a 2.6‐fold strain difference between scaffold zones under physiological deformation, confirming zonal interplay. Biaxial testing with preconditioning shows scaffold mechanics replicating native myocardium properties up to 10% strain. For epicardial suture attachment, a reinforced outline enables shape‐morphing and increases suture retention 2.16‐fold. Dynamic BioVAD cultivation with fibrin‐embedded cardiomyocytes significantly (p = 0.01) improves cell alignment versus controls. Finally, in a porcine myocardial infarction model, the BioVAD achieves complete epicardial attachment and vascular ingrowth within 7 days, compared to partial attachment in controls. This study highlights MEW as a versatile platform for tailoring cardiac scaffold mechanics to support tissue integration and cardiac function.