Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Functional characterization of poly(N-isopropylacrylamide) nanohydrogels for the controlled release of food preservatives

  • Fuciños González, Clara
  • Fuciños González, Juan Pablo
  • Pastrana Castro, Lorenzo Miguel
  • Rúa Rodríguez, María Luisa
In most active packaging systems for food applications, the preservative release is uncontrolled and frequently ineffective due to excessive or insufficient preservative concentration in the food matrix at a particular time. This work was aimed to evaluate the usefulness of pH- and temperature-sensitive poly(N-isopropylacrylamide) nanohydrogels for developing smart delivery systems to release preservatives as a response to environmental triggers. Pimaricin was used as a model preservative. Loading and release efficiencies were studied as a function of incorporation time and nanohydrogels composition, that differed in the cross-linker and acrylic acid content. Pimaricin loading efficiency was not affected by the acrylic acid. However, the cross-linking degree and incorporation time had a great influence. The lower the cross-linker content, the higher the loading efficiency, which in all cases exceeded 70 % at 12 h, approaching 100 % after 60 h of incorporation. No significant differences were observed between loading efficiencies obtained using water or methanol for pimaricin solubilisation. On the other hand, pimaricin release was dependent on the gel collapse, determined by the gel composition. Increasing the cross-linker content enhanced the nanoparticles' rigidity, and inclusion of acrylic acid as comonomer promoted strong electrostatic repulsions among the polymer chains. In both cases, the collapse was hampered, leading to a more hydrated collapsed state that favoured a sustained release of pimaricin. A mathematical model was also developed to predict the pimaricin release as a function of pH, temperature and storage time, allowing to select the most suitable nanohydrogel for a specific food application., Ministerio de Ciencia e Innovación | Ref. MAT 2006- 11662-CO3-CO2-C01, Ministerio de Educación y Ciencia | Ref. MAT 2010-21509-C03-01, Ministerio de Educación y Ciencia | Ref. EUI 2008-00115, Fundação para a Ciência e Tecnologia (FCT, Portugal) | Ref. SFRH/BPD/87910/ 2012
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Temperature- and pH-sensitive nanohydrogels of poly(N-Isopropylacrylamide) for food packaging applications: modelling the swelling-collapse behaviour

  • Fuciños González, Clara
  • Fuciños González, Juan Pablo
  • Míguez Quintas, Martín
  • Katime, Issa
  • Pastrana Castro, Lorenzo Miguel
  • Rúa Rodríguez, María Luisa
Temperature-sensitive poly(N-isopropylacrylamide) (PNIPA) nanohydrogels were synthesized by nanoemulsion polymerization in water-in-oil systems. Several cross-linking degrees and the incorporation of acrylic acid as comonomer at different concentrations were tested to produce nanohydrogels with a wide range of properties. The physicochemical properties of PNIPA nanohydrogels, and their relationship with the swelling-collapse behaviour, were studied to evaluate the suitability of PNIPA nanoparticles as smart delivery systems (for active packaging). The swelling-collapse transition was analyzed by the change in the optical properties of PNIPA nanohydrogels using ultraviolet-visible spectroscopy. The thermodynamic parameters associated with the nanohydrogels collapse were calculated using a mathematical approach based on the van’t Hoff analysis, assuming a two-state equilibrium (swollen to collapsed). A mathematical model is proposed to predict both the thermally induced collapse, and the collapse induced by the simultaneous action of two factors (temperature and pH, or temperature and organic solvent concentration). Finally, van’t Hoff analysis was compared with differential scanning calorimetry. The results obtained allow us to solve the problem of determining the molecular weight of the structural repeating unit in cross-linked NIPA polymers, which, as we show, can be estimated from the ratio of the molar heat capacity (obtained from the van’t Hoff analysis) to the specific heat capacity (obtained from calorimetric measurements), Ministerio de Ciencia e Innovación | Ref. MAT 2010-21509-C03-01, Ministerio de Educación y Ciencia | Ref. EUI 2008-00115, Ministerio de Ciencia e Innovación | Ref. MAT 2006- 11662-CO3-CO2-C01
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Use of poly(N‐isopropylacrylamide) nanohydrogels for the controlled release of pimaricin in active packaging

  • Fuciños González, Clara
  • Pérez Guerra, Nelson
  • Teijón, J.M.
  • Pastrana Castro, Lorenzo Miguel
  • Rua Rodriguez, María Luisa
  • Katime, I.
We propose here a delivery drug‐polymer system using poly(N‐isopropylacrylamide) (PNIPA) nanohydrogels that enables pimaricin to be protected from hostile environments and allows the controlled release of the antifungal through environmental stimuli. We synthesized 2 nanohydrogels, 1 with 100% N‐isopropylacrylamide (PNIPA(5)) and 1 with 80% N‐isopropylacrylamide copolymerized and 20% acrylic acid (PNIPA‐20AA(5)). Both were then, loaded with a pimaricin aqueous solution. The pimaricin release profiles of these 2 nanohydrogels were considerably different: PNIPA(5) released 10% and PNIPA‐20AA(5) released 30% with respect to the free pimaricin release. Moreover, the diffusion experiments showed that pimaricin was released from the PNIPA‐20AA(5) nanohydrogel for up to 3 times longer than free pimaricin. Therefore, incorporating acrylic acid as comonomer into the PNIPA nanohydrogel resulted in a slower but more continuous release of pimaricin. The highest pimaricin levels were reached when the most hydrophilic nanohydrogel was used. The bioassay results showed that the pimaricin‐nanohydrogel system was highly effective in inhibiting the growth of the indicator strain in conditions of thermal abuse. The spoilage in acidified samples stored under fluorescent lighting was reduced by 80.94%± 33.02% in samples treated with a pimaricin‐loaded nanohydrogel, but only by 19.91%± 6.68% in samples treated with free pimaricin. Therefore, 2 conclusions emerge from this study. One is that the nanohydrogel delivery system could impede the degradation of pimaricin. The other is that the inhibitory effect of the antifungal on yeast growth is more pronounced when it is added included into the nanohydrogel to the food, especially in an acidic environment. Practical Application:  This article presents relevant results on the use of nanohydrogels in food packaging. Nanohydrogels could provide protection so that the pimaricin remains active for a longer time. They also allow the controlled release of pimaricin, which thus regulates the unnecessary presence of the antifungal in the food., Ministerio de Educación y Ciencia | Ref. MAT2006-11662-C03-01, Ministerio de Educación y Ciencia | Ref. MAT2006-11662-C03-02, Ministerio de Educación y Ciencia | Ref. MAT2006-11662-C03-03, Ministerio de Ciencia e Innovación | Ref. MAT2010-21509-C03-01, Ministerio de Ciencia e Innovación | Ref. /EUI 2008-00115, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Cheese whey: a cost-effective alternative for hyaluronic acid production by Streptococcus zooepidemicus

  • Rodríguez Amado, Isabel
  • Vázquez Álvarez, José Antonio
  • Pastrana Castro, Lorenzo Miguel
  • Teixeira, José Antonio Couto
This study focuses on the optimisation of cheese whey formulated media for the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Culture media containing whey (W; 2.1 g/L) or whey hydrolysate (WH; 2.4 g/L) gave the highest HA productions. Both W and WH produced high yields on protein consumed, suggesting cheese whey is a good nitrogen source for S. zooepidemicus production of HA. Polysaccharide concentrations of 4.0 g/L and 3.2 g/L were produced in W and WH in a further scale-up to 5 L bioreactors, confirming the suitability of the low-cost nitrogen source. Cheese whey culture media provided high molecular weight (>3000 kDa) HA products. This study revealed replacing the commercial peptone by the low-cost alternative could reduce HA production costs by up to a 70% compared to synthetic media., Ministerio de Ciencia e Innovación | Ref. MAT 2010-21509-C03-01
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Functional characterisation and antimicrobial efficiency assessment of smart nanohydrogels containing natamycin incorporated into polysaccharide-based films

  • Fuciños González, Clara
  • Míguez Quintas, Martín
  • Cerqueira, Miguel Ângelo Parente Ribeiro
  • Costa, Maria J
  • Vicente, António A
  • Rúa Rodríguez, María Luisa
  • Pastrana Castro, Lorenzo Miguel
The potential application of polysaccharide-based films containing smart nanohydrogels for the controlled release of food preservatives is demonstrated here. Smart active packaging is the most promising alternative to traditional packaging as it provides a controlled antimicrobial effect, which allows reducing the amount of preservatives in the food bulk, releasing them only on demand. This work evaluates the usefulness of smart thermosensitive poly(N-isopropylacrylamide) (PNIPA) nanohydrogels with or without acrylic acid (AA) incorporated into polysaccharide-based films (GA) to transport natamycin and release it as a response to environmental triggers. Release kinetics in liquid medium from GA films containing PNIPA/AA nanohydrogels (GA-PNIPA(5) and GA-PNIPA-20AA(5)) presented a characteristic feature regarding the films without nanohydrogels that was the appearance of a lag time in natamycin release, able to reach values of around 35 h. Another important feature of natamycin release kinetics was the fact that the release from GA-PNIPA/AA films only occurred when temperature was increased, so that the natamycin release was restricted to when there is a risk of growth of microorganisms that cause food spoilage or the development of pathogenic microorganisms. Additionally, it could be observed that the relative fraction of natamycin released from GA-PNIPA/AA films was significantly (p < 0.05) higher than that released from GA films loaded with the same amount of free natamycin. It can be hypothesised that the encapsulation of natamycin into nanohydrogels helped it to be released from GA films, creating reservoirs of natamycin into the films and, therefore, facilitating its diffusion through the film matrix when the nanohydrogel collapses. In a solid medium, the low water availability limited natamycin release from GA-PNIPA/AA films restricting the on/off release mechanism of PNIPA/AA nanohydrogels and favouring the hydrophobic interactions between natamycin and polymer chains at high temperatures. Despite the low natamycin release in solid media, antimicrobial efficiency of GA-PNIPA(5) films containing natamycin in acidified agar plates was higher than that obtained with GA films without natamycin and GA films with free natamycin, probably due to the protecting effect against degradation when natamycin was included in the nanohydrogels, allowing its release only when the temperature increased., Fundação para a Ciência e a Tecnologia | Ref. SFRH/BPD/87910/2012, Fundação para a Ciência e a Tecnologia | Ref. SFRH/BPD/72753/ 2010, Fundação para a Ciência e a Tecnologia | Ref. PEst-OE/EQB/LA0023/2013, Ministerio de Ciencia e Innovación | Ref. MAT2010-21509-C03-01.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Evaluation of antimicrobial effectiveness of pimaricin-loaded thermosensitive nanohydrogels in grape juice

  • Fuciños González, Clara
  • Fuciños González, Juan Pablo
  • Fajardo Bernárdez, Paula
  • Rodríguez Amado, Isabel
  • Pastrana Castro, Lorenzo Miguel
  • Rúa Rodríguez, María Luisa
Pimaricin-loaded poly(N-isopropylacrylamide) nanohydrogels with and without acrylic acid, were evaluated as food-spoilage inhibitors in a model system and a real food product: grape juice. Pimaricin was proposed as a non-allergenic alternative to sulphites for protecting juices against recontamination. However, pimaricin may degrade under conditions and treatments (heating, acidification, lighting) commonly applied in producing fresh juices. Nanohydrogel encapsulation may be a feasible procedure to avoid pimaricin degradation, improving its antimicrobial activity. Pimaricin-free nanohydrogels did not affect the growth of the indicator yeast either in the food model system or in grape juice. Conversely, pimaricin-loaded nanohydrogels effectively inhibited the growth of the indicator yeast. In some cases, the inhibition was extended even further than using free pimaricin. For instance, in the food model system, pimaricin-loaded nanohydrogels with acrylic acid (NPPNIPA-20AA(5)) prevented the yeast growth for more than 81 h while free pimaricin was only effective for 12 h. Despite pimaricin-loaded nanohydrogels without acrylic acid (NPPNIPA(5)) were able to reduce maximum yeast growth, as in all treatments with pimaricin, the extent of the inhibitory effect was not significantly (p > 0.05) different to that achieved with free pimaricin. In grape juice, both free pimaricin and NPPNIPA-20AA(5) treatment completely inhibited the growth of the indicator yeast until the end of the bioassay. However, the latter provided similar inhibition levels using a smaller amount of pimaricin due to PNIPA-20AA(5) protection and its controlled release from the nanohydrogel. Therefore, nanohydrogel encapsulation may help to optimise antifungal treatments and decrease the incidence of food allergies., Marie Curie COFUND Post- doctoral Research Fellow, Fundação para a Ciência e a Tecnologia | Ref. SFRH/BPD/87910/ 2012, Ministerio de Ciencia e Innovación | Ref. MAT 2010-21509-C03-01, Ministerio de Ciencia e Innovación | Ref. MAT 2006- 11662-CO3-CO2-C01, Ministerio de Educación y Ciencia | Ref. EUI 2008-00115