Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Visible light activation of gold nanoparticles embedded into titanium dioxide surface in electrospun polymeric coatings

  • Sandúa Fernández, Xabier
  • Rivero Fuente, Pedro J.
  • Calvopiña, Jonathan
  • Rodríguez Trías, Rafael
This work reports the development of a functional photocatalytic coating based on a combination of polymeric electrospun fibres and nanoparticles that is intended to be activated in the visible light range. In this sense, the resulting fibres can act as an effective matrix for the incorporation of titanium dioxide (TiO2) particles, which are covered by gold nanoparticles (AuNPs), in the outer surface of the metal oxide precursor. In the first step of the process, the optical properties of the nanoparticles were determined by UV-Vis spectroscopy. The extension of the visible absorption can be associated to the localized surface plasmon resonance (LSPR) of the metallic AuNPs. In addition, the resultant particle size distribution and average particle diameter was evaluated by dynamic light scattering (DLS) measurements. Furthermore, the phase composition and porosity of the functional particle powder were analysed by an XRD and N2 adsorption test. In the second step, these synthesized particles have been successfully immobilized into a PAA + β-CD electrospun fibre matrix by using the two different deposition methods of dip-coating and solution-casting, respectively. The morphological characterization of the samples was implemented by means of scanning electron microscopy (SEM), showing uniform and homogeneous, free-beaded fibres with a random distribution of the synthesized particles deposited onto the electrospun fibres. Then, the functional coatings were removed from the substrate, and a thermogravimetric (TGA) analysis was carried out for each sample in order to obtain the precursor mass immobilized in the coating. Once the overall mass of precursor was obtained, the percentage of TiO2 particles and AuNPs in the precursor was calculated by using inductively coupled plasma atomic emission spectrometry (ICP-AES). Finally, the photocatalytic activity of both functional solution and electrospun coatings were evaluated in terms of a gradual degradation of rhodamine B (RhB) dye after continuous exposition to a visible-light lamp., This research was funded by the Government of Navarra-Department of Economic Development (PC080/081 GREEN-COPPER).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comparative study in the design of TIO2 assisted photocatalytic coatings monitored by controlling hydrophilic behavior and rhodamine b degradation

  • Sandúa Fernández, Xabier
  • Rivero Fuente, Pedro J.
  • Conde, Ana
  • Esparza Gorráiz, Joseba
  • Rodríguez Trías, Rafael
This work presents a comparative study related to the photocatalytic efficiency associated with wettability measurements and organic dye degradation, as well as other relevant properties (i.e., corrosion resistance, roughness, wettability, and adhesion to a substrate). The photocatalytic precursors are titanium dioxide nanoparticles (TiO2 NPs) which are dispersed onto a polymeric electrospun fiber matrix by using three different deposition techniques such as electrospraying, spraying, and dip-coating, respectively. In this work, the host electrospun matrix is composed of poly(acrylic acid) fibers crosslinked with cyclodextrin (β-CD), which shows a good chemical affinity and stability with the other deposition techniques which are responsible for incorporating the TiO2 NPs. In order to evaluate the efficacy of each coating, the resultant photocatalytic activity has been monitored by two different tests. Firstly, the reduction in the water contact angle is appreciated, and secondly, the degradation of an organic dye (Rhodamine B) is observed under UV irradiation. In addition, the final roughness, adherence, and pitting corrosion potential have also been controlled in order to determine which solution provides the best combination of properties. Finally, the experimental results clearly indicate that the presence of TiO2 NPs deposited by the three techniques is enough to induce a super hydrophilic behavior after UV irradiation. However, there are notable differences in photocatalytic efficiency on the Rhodamine B as a function of the selected deposition technique., This research was funded by the Government of Navarra—Department of Economic Development (PC080/081 GREEN-COPPER).