Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sandwich-Type Zeolite Intergrowths with MFI and the Novel Extra-Large Pore IDM-1 as Ordered End-Members

  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
  • Li, Jian
  • Mayoral, Alvaro
  • Gao, Zihao Rei
  • Camblor, Miguel A.
[EN] Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected high-resolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture., The authors thank funding from the Spanish Ministry of Science, Innovation and Universities, under Projects MAT2015-71117-R (MINECO/FEDER, UE), PID2019105479RB-I00 and RTI2018-101599-B-C22 (MCUI/AEI/ FEDER, UE), the Swedish Research Council (VR), and the Knut and Alice Wallenberg Foundation (KAW). L.A.V. also thanks the Generalitat Valenciana (project PROMETEO/ 2018/024). A.M. acknowledges the Spanish Ministry of Science (RYC2018-024561-I) and the Regional government of Aragon (DGA E13_20R), the National Natural Science Foundation of China (NFSC-21850410448 and NSFC21835002), and the Centre for High-resolution Electron Microscopy (C.EM), supported by SPST of ShanghaiTech University under contract No. EM02161943.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanism of the Low-Temperature Organic Removal from Imidazolium-Containing Zeolites by Ozone Treatment: Fluoride Retention in Double-4-Rings

  • Rei Gao, Zihao
  • Márquez-Álvarez, Carlos
  • Rodríguez-Gómez Balestra, Salvador
  • Yu, Huajian
  • Camblor, Miguel A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] For zeolites synthesized using imidazolium cations, the organic matter can be extracted at very low temperatures (100 °C) using ozone. This is possible for zeolites with 12-ring or larger pores but requires higher temperatures in medium-pore zeolites. The first chemical events in this process occur fast, even at room temperature, and imply the loss of aromaticity likely by the formation of an adduct between ozone and the imidazole ring through carbons C4 and C5. Subsequent rupture of the imidazole ring provides smaller and more flexible fragments that can desorb more readily. This process has been studied experimentally, mainly through infrared spectroscopy, and theoretically by density functional theory. Amazingly, fluoride anions occluded in the small double-four-ring units (d4r) during the synthesis remain inside the cage throughout the whole process when the temperature is not too high (¿150 °C). However, fluoride in larger cages in MFI ends up bonded to silicon in penta or hexacoordinated units, likely out of the cages, after ozone treatment at 150 °C. For several germanosilicate zeolites, the process allows their subsequent degermanation to yield stable high-silica zeolites. Quaternary ammonium cations require harsher conditions that eventually also extract fluoride from zeolite cages, including the d4r unit., Grants PID2019-105479RB-I00, PID2022-138481NB-I00, PID2022-137889OB-I00, TED2021-131223B-I00, PID2021-128141OB-C22, and FJC2018-035697-I were funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. M.A.C. thanks J. C. van der Waals for sharing unpublished information on his pioneering work. H.Y. is grateful to the China Scholarship Council (CSC) for a Ph.D. fellowship. S.R.G.B. also thanks the Consejeria de Universidades, Investigacion e Innovacion, Junta de Andalucia, for the POSTDOC_21_00069 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

2-Isopropyl-1,3-dimethylimidazolium as a versatile structure-directing agent in the synthesis of zeolites

  • Yu, HJ
  • Rojas, A
  • Gao, Zihao
  • Gómez-Hortigüela, L.
  • Li, JA
  • Paillaud, JL
  • Camblor, Miguel A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] Organic structure directing agents with low specificity offer opportunities for zeolite discovery by tweaking other structure-directing factors., The authors thank the Spanish Research Agency, MCIN/AEI/10.13039/501100011033, and the European Union for funding (Projects PID2019-105479RB-I00, PID2019-107968RB-I00, and PID2021-128141OB-C22, FEDER and TED2021-131223B-I00, "NextGenerationEU"/PRTR). H. Y. is grateful to the China Scholarship Council (CSC) for a PhD fellowship. L. A. V. also thanks the Generalitat Valenciana (PROMETEO CIPROM/2021/007).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure–direction towards the new large pore zeolite NUD-3

  • Chen, Fei-Jian
  • Gao, Zihao Rei
  • Li, Jian
  • Gómez-Hortigüela Sainz, Luis
  • Lin, Cong
  • Xu, Le
  • Du, Hong-Bin
  • Márquez Álvarez, Carlos
  • Sun, Junliang
  • Camblor, Miguel Ángel
[EN] The new zeolite NUD-3 possesses a three-dimensional system of large pore channels that is topologically identical to those of ITQ-21 and PKU- 14. However, the three zeolites have distinctly different frameworks: a particular single 4-membered ring inside the denser portion of the zeolite is missing in PKU-14, disordered in ITQ-21 and fully ordered in NUD-3. We document these differences and use molecular simulations to unravel the mechanismbywhich a particular structure directing agent dication, 1,10-(1,2-phenylenebis(methylene))bis(3-methylimidazolium), is able to orient this inner ring., Spanish Ministry of Science Innovation and Universities (MAT2015-71117-R, PID2019-105479RB-I00 and PID2019-107968RB-I00 projects, AEI, Spain and FEDER, EU), the National Natural Science Foundation of China (No. 22071099, 21673115, 21527803, 21871009, and 21601004), top talent cultivation program of Anhui Educational Committee (gxgwfx2018051), and the Swedish Research Council (VR) and the Knut and Alice Wallenberg Foundation (KAW). Synchrotron experiments were performed at beamline BL04 (MSPD) at ALBA Synchrotron with the collaboration of ALBA staff, and special thanks are given to A. Manjo´n for support in collecting the data and for helpful comments and suggestions. Z. R. G. specially thanks Yingxia Wang of Peking University for her kind suggestions and help with this paper. Centro Te´cnico Informa´tico- CSIC is acknowledged for running the calculations, and BIOVIA for providing the computational software. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

HPM-16, a Stable Interrupted Zeolite with a Multidimensional Mixed Medium–Large Pore System Containing Supercages

  • Gao, Zihao Rei
  • Balestra, Salvador R. G.
  • Li, Jian
  • Camblor, Miguel Ángel
[EN] HPM-16 is a highly porous germanosilicate zeolite with an interrupted framework that contains a three-dimensional system of 12+10 10(12) 12+10-membered ring (MR) pores. The 10(12) MR pore in the b direction is a 10 MR pore with long 12 MR stretches forming 30 long tubular supercages. Along one direction the 10 MR pores are fused, meaning that the separation between adjacent pores consists of a single tetrahedron that is, additionally, connected to only three additional tetrahedra (a Q3). These fused pores are thus decorated by T-OH groups along the whole diffusion path, creating a hydrophilic region embedded in an otherwise essentially hydrophobic environment. The structure is built from highly porous 12 12 12 MR uninterrupted layers that are connected to each other through Q3 producing a second system of 10 10 10 MRpores. This zeolite can be extensively degermanated yielding a material with high thermal stability, despite its interrupted nature., The authors are grateful for financial support to the Spanish Ministry of Science Innovation and Universities (MICIU) (PID2019-105479RB-I00 project, AEI, Spain and FEDER, EU). SRGB also thanks MICIU for a Juan de la Cierva- Formación Research Contract (FJC2018-035697-I code reference). Synchrotron experiments were performed at beamline BL04 (MSPD) at the Spanish ALBA Synchrotron with the collaboration of ALBA staff, and special thanks are due to A. Manj n and A. Missiul. Centro T cnico Inform tico-CSIC, Trueno cluster facility of SGAI-CSIC is acknowledged for running the calculations. We also deeply thank C. Márquez- Álvarez for his kind help in characterization. The cRED data were collected at the Electron Microscopy Center (EMC), Department of Materials and Environmental Chemistry (MMK) in Stockholm University with the support of Knut and Alice Wallenberg (KAW) foundation-financed project 3DEM-NATUR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

HPM-14, a new germanosilicate zeolite with Interconnected extra-large pores plus odd-membered and small pores

  • Gao, Zihao Rei
  • Li, Jian
  • Lin, Cong
  • Mayoral, Álvaro
  • Sun, Junliang
  • Camblor, Miguel Ángel
HPM-14 is a new extra-large pore zeolite synthesized using imidazolium-based organic structuredirecting agents, fluoride anions and germanium and silicon as tetrahedral components of the framework. Due to the presence of stacking disorder, the structure elucidation of HPM-14 was challenging, and different techniques were necessary to clarify the details of the structure and to understand the nature of the disorder. The structure has been solved by three-dimensional electron diffraction technique (3D ED) and consists of an intergrowth of two polymorphs possessing a three-dimensional channel system, including an extra-large pore opened through windows made up of sixteen tetrahedral atoms (16-membered ring, 16MR) as well as two additional sets of oddmembered (9MR) and small (8MR) pores. The intergrowth has been studied by scanning transmission electron microscopy (Cs-STEM) and powder X-ray diffraction simulations (DIFFaX), which show a large predominance of the monoclinic polymorph A., The authors acknowledge financial support by the Spanish Ministry of Science, Innovation and Universities (MAT2015-71117-R and PID2019-105479RB-I00 projects, AEI, Spain and FEDER, EU), the National Natural Science Foundation of China (No. 21871009, 21621061, 21527803, 21471009, NFSC-21850410448, NSFC- 21835002), the Swedish Research Council (VR) and the Knut and Alice Wallenberg Foundation (KAW), and the Centre for High-resolution Electron Microscopy (ChEM), supported by SPST of ShanghaiTech University under contract No. EM02161943. A.M. also acknowledges funding by the Spanish Ministry of Science, Innovation and Universities through the Ramon y Cajal Program (RYC2018-024561-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sandwich-type zeolite intergrowths with MFI and the novel extra-large pore IDM-1 as ordered end-members

  • Villaescusa, Luis A.
  • Li, Jian
  • Mayoral, Álvaro
  • Gao, Zihao Rei
  • Camblor, Miguel Ángel
Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected highresolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture., The authors thank funding from the Spanish Ministry of Science, Innovation and Universities, under Projects MAT2015-71117-R (MINECO/FEDER, UE), PID2019-105479RB-I00 and RTI2018-101599-B-C22 (MCUI/AEI/FEDER, UE), the Swedish Research Council (VR), and the Knut and Alice Wallenberg Foundation (KAW). L.A.V. also thanks the Generalitat Valenciana (project PROMETEO/2018/024). A.M. acknowledges the Spanish Ministry of Science (RYC2018-024561-I) and the Regional government of Aragon (DGA E13_20R), the National Natural Science Foundation of China (NFSC-21850410448 and NSFC-21835002), and the Centre for High-resolution Electron Microscopy (CℏEM), supported by SPST of ShanghaiTech University under contract No. EM02161943., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A stable aluminosilicate zeolite with intersecting three-dimensional extra-large pores

  • Lin, Qing-Fang
  • Gao, Zihao Rei
  • Lin, Cong
  • Zhang, Siyao
  • Chen, Junfeng
  • Li, Zhiqiang
  • Liu, Xialong
  • Fan, Wei
  • Li, Jian
  • Chen, Xiaobo
  • Camblor, Miguel Ángel
  • Chen, Fei-Jian
Anyone can then access the published paper FREE OF CHARGE by clicking on this link. Cualquier persona puede acceder al documento publicado de forma GRATUITA, accediendo a través del enlace: https://www.science.org/stoken/author-tokens/ST-242/full, [EN] Zeolites are crystalline porous materials with important industrial applications, including uses in catalytic and adsorption-separation processes. Access into and out of their inner confined space, where adsorption and reactions occur, is limited by their pore apertures. Stable multidimensional zeolites with larger pores able to process larger molecules are in demand in the fine chemical industry and for the oil processing on which the world still relies for fuels. Currently known extra-large-pore zeolites display poor stability and/or lack pore multidimensionality, limiting their usefulness. We report ZEO-1, a robust, fully connected aluminosilicate zeolite with mutually intersecting three-dimensional extra-large plus three-dimensional large pores. ZEO-1 is stable up to 1000°C, has an extraordinary specific surface area (1000 square meters per gram), and shows potential as a catalytic cracking catalys., National Natural Science Foundation of China (grant numbers: 21601004, 21776312, 22078364), the Natural Science Foundation of the Higher Education Institutions of Anhui Province, China (grant numbers: KJ2020A0585), and the Spanish Ministry of Science Innovation and Universities (MICIU) (PID2019-105479RB-I00 project, AEI, Spain and FEDER, EU). The cRED data was collected at the Electron Microscopy Center (EMC), Department of Materials and Environmental Chemistry (MMK) in Stockholm University with the support of the Swedish Research Council (Grant No. 1444205) and the Knut and Alice Wallenberg Foundation (KAW, 2012-0112) through the 3DEM-NATUR project. Use of the Advanced Photon Source at Argonne National Laboratory was supported by the U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. W.F. gratefully acknowledges support from the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division, under Award # DE-SC0019170., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrophobic composite foams based on nanocellulose-sepiolite for oil sorption applications

  • Sanguanwong, Amaret
  • Flood, Adrian E
  • Ogawa, Makoto
  • Martín-Sampedro, Raquel
  • Darder, Margarita
  • Wicklein, Bernd
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
Centro de Investigación Forestal (CIFOR), TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl)-oxidized cellulose nanofibers (CNF) were assembled to fibrous clay sepiolite (SEP) by means of a high shear homogenizer and an ultrasound treatment followed by lyophilization using three different methods: normal freezing, directional freezing, and a sequential combination of both methods. Methyltrimethoxysilane (MTMS) was grafted to the foam surface by the vapor deposition method to introduce hydrophobicity to the resulting materials. Both the SEP addition (for the normal and directional freezing methods) and the refreezing preparation procedure enhanced the compressive strength of the foams, showing compressive moduli in the range from 28 to 103 kPa for foams loaded with 20% w/w sepiolite. Mercury intrusion porosimetry shows that the average pore diameters were in the range of 30-45 µm depending on the freezing method. This large porosity leads to materials with very low apparent density, around 6 mg/cm3, and very high porosity >99.5%. In addition, water contact angle measurement and Fourier-transform infrared spectroscopy (FTIR) were applied to confirm the foam hydrophobicity, which is suitable for use as an oil sorbent. The sorption ability of these composite foams has been tested using olive and motor oils as models of organophilic liquid adsorbates, observing a maximum sorption capacity of 138 and 90 g/g, respectively., This work was supported by Vidyasirimedhi Institute of Science and Technology (VISTEC), and funds (projects: MAT2015-71117-R and PID2019-105479RB-I00) from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU). R. M.-S. acknowledges the MINECO (Spain) for a “Juan de la Cierva-Incorporación” contract (IJCI-2016-28403) and B.W. thanks the AEI for a JIN project (PID2019-107022RJ-I00). Authors thank the Agencia Estatal CSIC (Spain) for supporting the Open Access publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dication Containing Three Aromatic Ring Structure-Directs toward a Chiral Zeolite, Spans Three Cavities, and Effectively Traps Water

  • Gao, Zihao Rei
  • Balestra, Salvador R. G.
  • Gómez-Hortigüela Sainz, Luis
  • Li, Jian
  • Márquez Álvarez, Carlos
  • Camblor, Miguel Ángel
[EN] The chiral zeolite STW has been synthesized using a large dication containing three aromatic rings (two imidazolium moieties plus a benzene one). The integrity of the occluded organics is proven by 1H and 13C liquid NMR of the zeolite dissolved in HF/D2O. Molecular simulations strongly suggest that each aromatic ring is located in a different cavity so that each dication crosses two medium pore 10-membered-ring (MR) windows. This is confirmed by Rietveld refinement against synchrotron powder X-ray diffraction data, which suggests that there is also trapped water in the cavities, explaining a significant excess of H found in this material. The presence of water is very soundly confirmed by Fourier-transform infrared experiments, which also show that this water cannot leave the zeolite even after heating at 180 °C under vacuum. Molecular simulations allow us to conclude that this is due to the blockage of the 10 and 8MR windows by the occluded organics. The peculiar situation of an organic structure-directing agent spanning three cavities has important implications for the structure-direction concept that are briefly discussed. Several chiral derivatives of this dication have also been studied, and their possibility to enantioselectively direct the crystallization of STW has been analyzed., This article is part of projects PID2019-105479RB-I00 and PID2019-107968RB-I00 funded by MCIN/AEI/10.13039/501100011033, Spain. S.R.G.B. was supported by grant FJC2018-035697-I funded by MCIN/AEI/10.13039/501100011033. Centro Técnico Informático-CSIC, Trueno, and CESGA (Supercomputing Center of Galicia) cluster facilities are acknowledged for running the calculations. OpenAccess funding is provided by CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring the properties of nanocellulose-sepiolite hybrid nanopapers by varying the nanocellulose type and clay content

  • Martín-Sampedro, Raquel
  • Eugenio, María E.
  • Ibarra, David
  • Ruiz-Hitzky, Eduardo
  • Aranda, Pilar
  • Darder, Margarita
23 Pág., The development of nanocellulose-clay materials resulted of great relevance, as it opened up the applications of nanocellulose, but it still requires new approaches that could contribute to improve the preparation procedures and the features of this type of biohybrid materials. In this context, nanocellulose-sepiolite (NC-S) biocomposite foams and films have already been successfully tested for some applications. However, the influence of the nanocellulose properties on sepiolite-cellulose interactions, and consequently on the final properties and potential applications of NC-S biohybrid materials, has not been previously studied. To address this knowledge gap, four kinds of nanocelluloses produced from elm biomass (non-chemically pretreated lignocellulose and bleached cellulose nanofibers (LCNFs and CNFs, respectively), TEMPO-oxidized cellulose nanofibers (TOCNFs) and cellulose nanocrystals (CNCs)) were characterized and used to develop NC-S nanopapers. A stronger interaction was found between sepiolite and negatively charged nanocelluloses (TOCNFs and CNCs), improving their thermal stability and mechanical properties by increasing the sepiolite content. Furthermore, the type of nanocellulose and the sepiolite content could be adjusted to tune the flammability, water permeability and mechanical and optical properties of the NC-S nanopapers. Graphical abstract: [Figure not available: see fulltext.], This work was supported by the MCIN/AEI/https://doi.org/10.13039/501100011033 [Spain, project PID2019-105479RB-I00] and by MCIN/AEI/https://doi.org/10.13039/501100011033 and FEDER Una manera de hacer Europa [Spain & EU, projects MAT2015-71117-R and RTI2018-096080-B-C22]; Comunidad de Madrid [Spain, project SUSTEC-CM S2018/EMT-4348]; and MINECO [Spain, grant IJCI-2016-28403]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sustainable Synthesis of Carbon-Clay Nanocomposites

  • Barra, Ana
  • Nunes, Cláudia
  • Ruiz-Hitzky, Eduardo
  • Ferreira, Paula
Carbon nanostructures, such as graphene derivatives, have remarkable mechanical properties, electrical conductivity, and high specific surface areas [...], This work was developed within the scope of the project CICECO—Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020, and LA/P/0006/2020, financed by national funds through the FCT/MEC (PIDDAC). A.B. and P.F. are thankful to FCT for grant SFRH/BD/148856/2019 and the Investigator FCT (IF/00300/2015), respectively. C.N. is grateful to Portuguese national funds (OE), through FCT, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. E.R.-H. gratefully acknowledges the financial support from AEI (Spain) and FEDER (EU) funds (projects MAT2015-71117-R and PID2019-105479RB-I00, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A 3D extra-large-pore zeolite enabled by 1D-to-3Dtopotactic condensation of a chain silicate

  • Li, Jian
  • Gao, Zihao Rei
  • Lin, Qing-Fang
  • Liu, Chenxu
  • Gao, Fangxin
  • Lin, Cong
  • Zhang, Siyao
  • Deng, Hua
  • Mayoral, Álvaro
  • Fan, Wei
  • Luo, Song
  • Chen, Xiaobo
  • He, Hong
  • Camblor, Miguel Ángel
  • Chen, Fei-Jian
  • Yu, Jihong
Anyone can access the published paper FREE OF CHARGE by clicking on this link: [Cualquier persona puede acceder al documento publicado de forma GRATUITA, accediendo a través del enlace], Zeolites are microporous silicates with a large variety of applications as catalysts, adsorbents, and cationexchangers. Stable silica-based zeolites with increased porosity are in demand to allow adsorption andprocessing of large molecules but challenge our synthetic ability. We report a new, highly stable pure silicazeolite called ZEO-3, which has a multidimensional, interconnected system of extra-large pores open throughwindows made by 16 and 14 silicate tetrahedra, the least dense polymorph of silica known so far. This zeolitewas formed by an unprecedented one-dimensional to three-dimensional (1D-to-3D) topotactic condensationof a chain silicate. With a specific surface area of more than 1000 square meters per gram, ZEO-3 showed ahigh performance for volatile organic compound abatement and recovery compared with other zeolites andmetal-organic frameworks., This work was supportedby the his work was supportedby the National Natural Science Foundation of China (grants 22288101, 21920102005, 21835002, 22271115, 21601004,21621001, 21776312, and 22078364), the National Key Researchand Development Program of China (grants 2022YFA1503600 and2021YFA1501202), the 111 Project (grant B17020), the Natural Science Foundation of the Higher Education Institutions of Anhui Province, China (grant KJ2020A0585), and the Spanish Ministry of Science Innovation (grants PID2019-105479RB-I00 project,MCIN/AEI/10.13039/501100011033, and RYC2018-024561-I). ThecRED data were collected at the Electron Microscopy Center (EMC), Department of Materials and Environmental Chemistry(MMK), at Stockholm University with the support of the Knut and Alice Wallenberg Foundation (KAW, 2012-0112) through the 3DEM-NATUR project. Use of the Advanced Photon Source at Argonne National Laboratory was supported by the US Departmentof Energy, Office of Science, Office of Basic Energy Sciences,under contract no. DE-AC02-06CH11357. Additional funding fromthe European Union’s Horizon 2020 research and innovationprogram (grant 823717-ESTEEM3) and the regional governmentof Aragon (grant DGA E13_20R) is also acknowledged.(grants22288101, 21920102005, 21835002, 22271115, 21601004,21621001, 21776312, and 22078364), the National Key Researchand Development Program of China (grants 2022YFA1503600 and2021YFA1501202), the 111 Project (grant B17020), the NaturalScience Foundation of the Higher Education Institutions of AnhuiProvince, China (grant KJ2020A0585), and the Spanish Ministryof Science Innovation (grants PID2019-105479RB-I00 project,MCIN/AEI/10.13039/501100011033, and RYC2018-024561-I). ThecRED data were collected at the Electron Microscopy Center(EMC), Department of Materials and Environmental Chemistry(MMK), at Stockholm University with the support of the Knut andAlice Wallenberg Foundation (KAW, 2012-0112) through the3DEM-NATUR project. Use of the Advanced Photon Source atArgonne National Laboratory was supported by the US Departmentof Energy, Office of Science, Office of Basic Energy Sciences,under contract no. DE-AC02-06CH11357. Additional funding fromthe European Union’s Horizon 2020 research and innovationprogram (grant 823717-ESTEEM3) and the regional governmentof Aragon (grant DGA E13_20R) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Alginate bionanocomposite films containing sepiolite modified with polyphenols from myrtle berries extract

  • Cheikh, Dorsaf
  • Martín-Sampedro, Raquel
  • Hatem Majdoub
  • Darder, Margarita
10 Pág., Alginate nanocomposite films incorporating sepiolite (Sep) modified with myrtle berries extract (MBE) rich in polyphenols were prepared by solution casting method. The effects of different extract concentrations on the film properties were determined by measuring physicochemical, mechanical and antioxidant properties of the films. Fourier transform infrared (FTIR) spectra indicated that strong interactions between the polyphenols present in the MBE and sepiolite were involved in the films. The results suggested that incorporation of Sep-MBE hybrids into the films improved elongation at break, tensile strength, water vapor and UV barrier properties compared to the control film. The antioxidant activity of the films was significantly improved and raised with increasing content of MBE. The release kinetics results of MBE polyphenols from the active films into alcoholic food simulant indicated that the addition of Sep-MBE hybrids to alginate film is able to slow the release of MBE polyphenols. This study revealed the benefits of incorporation of Sep-MBE hybrids into the alginate films and their potential application as active packaging films or coating material., The authors gratefully acknowledge financial support from the Agencia Estatal de Investigación (AEI, Spain) and FEDER (EU) funds (projects: MAT2015-71117-R and PID2019-105479RB-I00). D. C. acknowledges financial support from a grant from the Tunisian Ministry of Higher Education and Scientific Research. R. M.-S. acknowledges the MINECO (Spain) for a “Juan de la Cierva-Incorporación” contract (IJCI-2016-28403)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Allantoin‑zinc layered simple hydroxide biohybrid as antimicrobial active phase in cellulosic bionanocomposites as potential wound dressings

  • Marugan, Esther
  • Rebitski, Ediana P.
  • Darder, Margarita
  • Balestra, Salvador R. G.
  • Del Real Soldevilla, Gustavo
  • Aranda, Pilar
15 Pág., Cellulosic materials loaded with a novel zinc layered simple hydroxide (LSH) with allantoin in its structure (allant-ZnLSH) have been developed for potential application as wound dressings. The allant-ZnLSH biohybrid was synthesized by slow addition of a zinc chloride solution to an aqueous solution of allantoin, while adding a NaOH solution dropwise to maintain a controlled pH. The recovered precipitate was characterized by XRD, FTIR, chemical analysis, and FE-SEM. The allant-ZnLSH material was further incorporated into biopolymeric matrices such as hydroxypropylmethylcellulose (HPMC), carboxymethylcellulose (CMC) and cellulose nanofibers (CNF), because of their biocompatibility and biodegradability. The resulting films presented suitable mechanical properties, with Young's modulus values ranging between 1.3 and 3.9 GPa, as well as appropriate water vapor transmission rates (WVTR) for application in would healing, around 250–630 g/m2 per day. The bionanocomposite films also showed interesting barrier properties against the passage of UV light, while keeping a certain transparency in the visible range that would allow the healing process to be monitored without removing the dressing. Their antibacterial action was evaluated against E. coli and S. aureus in agar plates, showing only antimicrobial activity against the latter. The goal is to develop materials that can exhibit antimicrobial, and skin regenerative properties provided by the presence of zinc ions and allantoin, respectively., Authors acknowledge financial support from the MCIN/AEI/10.13039/501100011033 (Spain, project PID2019-105479RB-I00) and FEDER (EU) funds (project MAT2015-71117-R). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). EPR acknowledges the CNPq (Brazil) for the fellowship 204360/2014-5. S. R. G. B. was supported by grant POSTDOC_21_00069 funded by Consejería de Universidad, Investigación e Innovación, Junta de Andalucı́a (Spain). We are thankful to C3UPO for the HPC facilities provided. Authors also acknowledge Dr. I Sobrados and Dr. V. Díez for valuable technical assistance and discussion in the NMR study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

2-Isopropyl-1,3-dimethylimidazolium as a versatile structure-directing agent in the synthesis of zeolites

  • Yu, Huajian
  • Rojas, Álex
  • Gao, Zihao Rei
  • Gómez-Hortigüela Sainz, Luis
  • Villaescusa, Luis A.
  • Li, Jian
  • Paillaud, Jean-Louis
  • Camblor, Miguel Ángel
[EN] An organic cation lacking specificity in its structure-directing action offers the possibility, through the screening of other structure-directing parameters, to synthesize a variety of zeolites. In this work we show that the organic structure-directing agent 2-isopropyl-1,3-dimethylimidazolium (2iPr13DMI) can produce up to seven different zeolite phases depending on water concentration, the presence of inorganic impurities, crystallization temperature and time, and germanium molar fraction. The obtained phases are very different in terms of pore system, connectivity of the zeolite structure and structural units. At the pure SiO2 side, ZSM-12 and SSZ-35 dominate, with ZSM-12 being favored by the presence of potassium impurities and by less concentrated conditions. The introduction of Ge at low levels favors SSZ-35 over ZSM-12 and as the Ge fraction increases it successively affords CSV, -CLO and two distinct UOS zeolites, HPM-11 and HPM-6. These two zeolites have the same topology but distinct chemical compositions and display powder X-ray diffraction patterns that are much different from each other and from that of as-synthesized IM-16 (UOS reference material). They also show different symmetry at 96 K. Rietveld refinements of the three as-made UOS materials mentioned are provided. HPM-6 and HPM-11 are produced in distinct, non-adjacent crystallization fields. The frequent cocrystallization of the chiral STW zeolite, however, did not afford its synthesis as a pure phase. Molecular mechanics simulations of the location of the organic cation and host–guest interactions fail to explain the observed trends, but also considering the intrinsic stability of the zeolites and the effect of germanium help to rationalize the results. The study is completed by DFT calculations of the NMR chemical shifts of 13C in UOS (helping to understand splittings in the spectrum) and 19F in CSV (supporting the location of fluoride inside the new [4452], which is an incomplete double 4-ring)., The authors thank the Spanish Research Agency, MCIN/AEI/10.13039/501100011033, and the European Union for funding (Projects PID2019-105479RB-I00, PID2019-107968RB-I00, and PID2021-128141OB-C22, FEDER and TED2021-131223B-I00, “NextGenerationEU”/PRTR). H. Y. is grateful to the China Scholarship Council (CSC) for a PhD fellowship. L. A. V. also thanks the Generalitat Valenciana (PROMETEO CIPROM/2021/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

[Dataset] Interchain Expanded Extra-Large Pore Zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel Ángel
Source data for the article entitle "Interchain Expanded Extra-Large Pore Zeolites", Nature 2024, including the detailed structural and physicochemical and chemical characterization of those zeolites, [EN] 1. Description of methods used for collection/generation of data: Diffraction (electron, synchrotron X-ray, neutron). Infrared spectroscopy multinuclear MAS NMR gas adsorption electron paramagnetic resonance DFT calculations Catalytic reaction 2. Methods for processing the data: Those needed depending on the type of data (SHELX, Rietveld refinement, fast Fourier Transform...). Please, check the paper., Spanish Ministry of Science Innovation, PID2019-105479RB-I00, TED2021-131223B-I00 projects, and RYC2018-024561-I and FJC2018-035697-I National Natural Science Foundation of China, 22371121, 22288101, 21920102005, 21835002, 22271115 and 52270111 National Key Research and Development Program of China, 2022YFA1503600, 2021YFA1501202, 2021YFA1501401 the 111 project, B17020 Fundamental Research Funds for the Central Universities of China, 020514380306 Consejería de Universidades, Investigación e Innovación, Junta de Andalucía, POSTDOC_21_00069 Knut and Alice Wallenberg Foundation, KAW, 2012-0112 European Union’s Horizon 2020 research and innovation program, 823717-ESTEEM3 regional government of Aragon, DGA E13_20R China Spallation Neutron Source, P1823060200002, Fig-2.xlsx; Ex-Fig1.xlsx; Ex-Fig. 3.xlsx; Ex-Fig. 6.xlsx; Ex-Fig. 7.xlsx; Ex-Fig. 8.xlsx; Fig-S8.xlsx; Fig-S9.xlss; Fig-S10.xlsx Fig-S11.xlsx Fig-S12.xlsx Fig-S13.xlsx Fig-S14.xlsx Fig-S15.xlsx Fig-S16a.csv Fig-S16b.csv Fig-S17.csv Fig-S18.xlsx; Fig-S19.csv; Fig-S20.xlsx; Fig-S21.xlsx; Fig-S22a.csv; Fig-S22b.csv; Fig-S23.xlsx; Fig-S24.xlsx; Fig-S25.xlsx, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the combined addition of ultrasonicated kraft lignin and montmorillonite on hydroxypropyl methylcellulose bionanocomposites

  • Martín-Sampedro, Raquel
  • Aranda, Pilar
  • Del Real Soldevilla, Gustavo
  • Ruiz-Hitzky, Eduardo
  • Darder, Margarita
17 Pág., Although hydroxypropyl methylcellulose (HPMC) has been proposed as renewable substitute for traditional plastic, its barrier and active properties need to be improved. Thus, the combination of an organic residue such as kraft lignin (0-10% w/w) and a natural clay such as montmorillonite (3% w/w) by application of ultrasound can significantly improve HPMC properties. This is most likely due to the close interaction between lignin and montmorillonite, which leads to delamination of the clay and improves its dispersion within the HPMC matrix. Specifically, the addition of kraft lignin to the bionanocomposite films provided them with UV-shielding, antioxidant capacity and antibacterial activity. The incorporation of 3% montmorillonite resulted in reductions of 65.8% and 11.4% in oxygen (OP) and water vapor permeabilities (WVP), respectively. Moreover, a reduction of 43.8% in WVP was achieved when both lignin (1%) and montmorillonite (3%) were incorporated, observing a synergistic effect. Thus, the HPMC bionanocomposite with 1% lignin and 3% montmorillonite, presented good thermal stability and mechanical strength with significantly improved gas barrier permeability, as well as UV-shielding (maintaining a good transparency), antioxidant and antibacterial activities., This work was supported by the MICIN/AEI doi: 10.13039/501100011033 (Spain) [PID2019-105479RB-I00]; MICIU/AEI (Spain) and FEDER (EU) [MAT2015-71117-R]; MINECO (Spain) [contract IJCI-2016-28403]. Dr Cristina Almansa, from the Technical Research Service of University of Alicante, and Dr Maria del Mar López-González, from ICTP-CSIC, are also acknowledged for their contribution and help in TEM and confocal analysis and in oxygen permeability measurements, respectively. Finally, authors gratefully acknowledge the contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting the interaction, exchange of knowledge and collaborations in the field of lignin valorization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Organic Semiconductor Micro/Nanocrystals for Laser Applications

  • Álvarez Conde, Javier
  • García Frutos, Eva M.
  • Cabanillas, Juan
Organic semiconductor micro/nanocrystals (OSMCs) have attracted great attention due to their numerous advantages such us free grain boundaries, minimal defects and traps, molecular diversity, low cost, flexibility and solution processability. Due to all these characteristics, they are strong candidates for the next generation of electronic and optoelectronic devices. In this review, we present a comprehensive overview of these OSMCs, discussing molecular packing, the methods to control crystallization and their applications to the area of organic solid-state lasers. Special emphasis is given to OSMC lasers which self-assemble into geometrically defined optical resonators owing to their attractive prospects for tuning/control of light emission properties through geometrical resonator design. The most recent developments together with novel strategies for light emission tuning and effective light extraction are presented., We are grateful for support from the Agencia Estatal de Investigación (AEI, Spain) (project PID2019-105479RB-I00). IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, grant SEV-2016-0686). J. C.-G. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (RTI2018-097508- B-I00), and from the Regional Government of Madrid (NMAT2D S2018/NMT4511), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoarchitectonics of lignin-sepiolite bionanocomposite foams for application in environmental remediation

  • Jiménez-López, Brenda Azharel
  • Martín-Sampedro, Raquel
  • Leyva-Ramos, Roberto
  • Darder, Margarita
  • Aranda, Pilar
10 Pág., Innovative bionanocomposite foams based on precipitated Kraft lignin (Lig) and Kraft black liquor (BL) loaded with sepiolite (Sep) were prepared. BL/Sep bionanocomposites were synthesized by emulsion templating and Lig/Sep bionanocomposites were prepared by freeze-drying, resulting in stable and rigid foams. BL/Sep bionanocomposites displayed a closed cell structure, a specific area between 19 and 35 m2/g and macropores of varying sizes. The porosity in this technique is achieved by the mechanical agitation of the emulsion. On the other hand, freeze-dried Lig/Sep bionanocomposites showed open cell morphology with surface areas ranging from 1 to 4 m2/g and uniform macropores due to the ice-templating process. The presence of sepiolite in both types of bionanocomposite foams improved their stiffness, with Young's moduli ranging from 0.21 to 9.6 MPa. The capacity of the foams to adsorb metals, drugs and dyes was evaluated and it was found that the synthesized bionanocomposite foams exhibiting similar adsorption capacities as that reported for lignin. Sepiolite significantly improved the adsorption of Cu(II), Cd(II), acetaminophen (ACT), and methylene blue (MB) in BL/Sep bionanocomposites. Meanwhile, the Lig/Sep bionanocomposites demonstrated superior adsorption capacities for the Cr(VI) anion and aromatic ring compounds, including ACT and MB. In this respect, these lignin-sepiolite foams can be considered as promising materials for the removal of pollutants in aqueous solution., The authors thank the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00 and PID2022-137889OB-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00). B.A.J.L. thanks the CONAHCYT (México) for the Beca mixta program, scholarship No. 291276. We also thank the Interdisciplinary Platforms for Sustainable Plastics towards a Circular Economy (SusPlast), and for Sustainability and Circular Economy (SosEcoCir) of The Spanish National Research Council (CSIC). Finally, authors gratefully acknowledge the contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting the interaction, exchange of knowledge and collaborations in the field of lignin valorization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interchain-expanded extra-large-pore zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel Ángel
Stable aluminosilicate zeolites with extra-large pores that are open through rings of more than 12 tetrahedra could be used to process molecules larger than those currently manageable in zeolite materials. However, until very recently1-3, they proved elusive. In analogy to the interlayer expansion of layered zeolite precursors4,5, we report a strategy that yields thermally and hydrothermally stable silicates by expansion of a one-dimensional silicate chain with an intercalated silylating agent that separates and connects the chains. As a result, zeolites with extra-large pores delimited by 20, 16 and 16 Si tetrahedra along the three crystallographic directions are obtained. The as-made interchain-expanded zeolite contains dangling Si-CH3 groups that, by calcination, connect to each other, resulting in a true, fully connected (except possible defects) three-dimensional zeolite framework with a very low density. Additionally, it features triple four-ring units not seen before in any type of zeolite. The silicate expansion-condensation approach we report may be amenable to further extra-large-pore zeolite formation. Ti can be introduced in this zeolite, leading to a catalyst that is active in liquid-phase alkene oxidations involving bulky molecules, which shows promise in the industrially relevant clean production of propylene oxide using cumene hydroperoxide as an oxidant., Financial support from the Spanish Ministry of Science Innovation (PID2019-105479RB-I00 and TED2021-131223B-I00 Projects, MCIN/AEI/10.13039/501100011033 and grants RYC2018-024561-I and FJC2018-035697-I); the National Natural Science Foundation of China (grants 22371121, 22288101, 21920102005, 21835002, 22271115 and 52270111); the National Key Research and Development Program of China (grants 2022YFA1503600, 2021YFA1501202 and 2021YFA1501401); the 111 Project (grant B17020); the Fundamental Research Funds for the Central Universities of China (grant 020514380306); and the Consejería de Universidades, Investigación e Innovación, Junta de Andalucía (grant POSTDOC_21_00069) is gratefully acknowledged. Continuous rotation electron diffraction data were collected at the Electron Microscopy Center, Department of Materials and Environmental Chemistry at Stockholm University with the support of the Knut and Alice Wallenberg Foundation (grant 2012-0112) through the 3DEM-NATUR Project. We acknowledge the use of instrumentation provided by the National Facility ELECMI (Integrated Infrastructure for Electron Microscopy of Materials) ICTS (Instalación Científico Técnica Singular) node Laboratorio de Microscopías Avanzadas at the University of Zaragoza. Additional funding from the European Union’s Horizon 2020 Research and Innovation Program (grant 823717-ESTEEM3) and the Regional Government of Aragon (grant DGA E13_20R) is also acknowledged. H.Y. is grateful to the China Scholarship Council for a PhD grant. Synchrotron powder X-ray diffraction data experiments were performed at the MSPD (Materials Science Powder Diffraction) beamline bl04 at the ALBA Spanish Synchrotron with the collaboration of the ALBA staff. We thank C3UPO (Centro de Cálculo Científico de la Universidad Pablo de Olavide) for providing high-performance computing facilities and L.-H. He for help with the powder neutron diffractions data collection performed at the general purpose powder diffractometer of China Spallation Neutron Source, Dongguan, China (Project General Purpose Powder Diffractometer, P1823060200002)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silica–Ti3C2Tx MXene Nanoarchitectures with Simultaneous Adsorption and Photothermal Properties

  • Ruiz-Hitzky, Eduardo
  • Ounis, Mabrouka
  • Younes, Mohamed Kadri
  • Pérez-Carvajal, Javier
Layered Ti3C2Tx MXene has been successfully intercalated and exfoliated with the simultaneous generation of a 3D silica network by treating its cationic surfactant intercalation compound (MXene-CTAB) with an alkoxysilane (TMOS), resulting in a MXene–silica nanoarchitecture, which has high porosity and specific surface area, together with the intrinsic properties of MXene (e.g., photothermal response). The ability of these innovative MXene silica materials to induce thermal activation reactions of previously adsorbed compounds is demonstrated here using NIR laser irradiation. For this purpose, the pinacol rearrangement reaction has been selected as a first model example, testing the effectiveness of NIR laser-assisted photothermal irradiation in these processes. This work shows that Ti3C2Tx-based nanoarchitectures open new avenues for applications that rely on the combined properties inherent to their integrated nanocomponents, which could be extended to the broader MXene family., The authors thank the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00 and PID2022-137889OB-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00). J.P.C. acknowledges financial support from RYC2022-037460-I Ramon y Cajal contract project funded by MCIN/AEI/10.13039/501100011033 and FSE+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na-S batteries

  • Tabuyo-Martínez, Marina
  • Wicklein, Bernd
  • Aranda, Pilar
Rechargeable batteries are a major element in the transition to renewable energie systems, but the current lithium-ion battery technology may face limitations in the future concerning the availability of raw materials and socio-economic insecurities. Sodium-sulfur (Na-S) batteries are a promising alternative energy storage device for small- to large-scale applications driven by more favorable environmental and economic perspectives. However, scientific and technological problems are still hindering a commercial breakthrough of these batteries. This review discusses strategies to remedy some of the current drawbacks such as the polysulfide shuttle effect, catastrophic volume expansion, Na dendrite growth, and slow reaction kinetics by nanostructuring both the sulfur cathode and the Na anode. Moreover, a survey of recent patents on room temperature (RT) Na-S batteries revealed that nanostructured sulfur and sodium electrodes are still in the minority, which suggests that much investigation and innovation is needed until RT Na-S batteries can be commercialized. © 2021 Tabuyo-Martinez et al.; licensee Beilstein-Institut. License and terms: see end of document. All Rights Reserved., Financial support from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU) is acknowledged (MAT2015-71117-R and PID2019-105479RB-I00 projects). BW also thanks the MICINN for a JIN contract (PID2019-107022RJ-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modulated Optoelectronic Properties of MOF/CNF Bionanocomposite Films for Bacterial Growth Control under Visible Light

  • Guerrero, Joab D.
  • Martín-Sampedro, Raquel
  • Cuadrado, Ramón
  • Llano, Iván
  • García-Frutos, Eva M.
  • Aranda, Pilar
  • Ibarra, David
  • Eugenio, María E.
  • Vázquez, Luis
  • Pérez-Carvajal, Javier
  • Darder, Margarita
The present work reports an experimental and theoretical investigation of tuning the optoelectronic properties of MIL-125-NH2 nanoparticles by grafting aromatic molecules. The postsynthetic modification of the MOF MIL-125-NH2 with 3,4-dihydroxybenzaldehyde (DBA) resulted in a 23% reduction in the bandgap energy, from 2.71 to 2.08 eV, while increasing the absorbance throughout the visible region of the spectrum, which could be attributed to stabilization due to enol-imine/keto-enamine tautomerism, as supported by DFT theoretical calculations. Pristine and grafted MOFs were assembled into cellulose nanofibers (CNF) for the preparation of functional CNF-based bionanocomposites. The mechanical properties of the films improved, with Young’s modulus increasing from 1.3 GPa in CNF to 7.5 GPa in the film with 20% MOF loading. The potential of the developed materials for photocatalytic antimicrobial therapy was evaluated against Staphylococcus aureus (S. aureus). In vitro tests showed that both bionanocomposite films with pristine and DBA-modified MOF remarkably reduced bacterial growth due to the photocatalytic action of the MOF under visible light. The inhibition values were around 58% and 72%, respectively, while minimal inhibition was observed under dark conditions. These initial results support the potential use of the developed bionanocomposite films as wound dressings., The authors acknowledge financial support from projects funded by AEI, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00, PID2022-137889OB-I00, and PID2022-141965OB-C21) and “ERDF A way of making Europe” (EU, projects PID2022-137889OB-I00 and PID2022-141965OB-C21), and projects TED2021-131223B–I00 and TED2021-132122B–C1 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”. J.P.-C. also acknowledges financial support from RYC2022-037460-I Ramon y Cajal contract, funded by AEI (MCIN/AEI/10.13039/501100011033). R.C. and J.P.-C. thankfully acknowledge RES resources provided by the Barcelona Supercomputing Center (BSC) in MareNostrum5 GPP to QHS-2024-2-0024. J.D.G. acknowledges the PhD fellowship CSIC PRE23_ICMM_111 (AEI, Spain). We also thank the Interdisciplinary Platforms for Sustainable Plastics towards a Circular Economy (SusPlast) and for Sustainability and Circular Economy (SosEcoCir) of the Spanish National Research Council (CSIC). The authors also acknowledge Dr A. Jacas for the design and construction of the irradiation device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Direct hydrothermal synthesis of zeolites and beyond: Interchain expansion and topotactic condensation

  • Yu, Huajian
Tesis doctoral. (2025). Universidad Autónoma de Madrid. Programa de Doctorado en Química Aplicada. Cuevas Rodríguez, Jaime Fernando; tutor., [EN] For conventional hydrothermal synthesis, organic structure-directing agents (OSDA, see below), type and amount of T atoms (i.e., atoms participate as tetrahedra in the zeolite framework), HF contents, water contents, crystallization temperature and time have been investigated in silicates, germanosilicates, aluminosilicates and aluminophosphates syntheses. We have discovered and characterized zeolites HPM-9 (stable low Ge UWY-like structure) and HPM-18 (new structure) by direct synthesis. We also obtained three zeolite precursors (HPM-3, HPM-22 and HPM-23) that give rise to three zeolites (JSN, MTF and HEU, respectively) by topotactic condensation. We studied systematically the calcination parameters after the hydrothermal synthesis, including various temperatures and durations under two types of calcination (in air and N2), as well as a combination of ozone treatment followed by N2 calcination for HPM-3 topotactic condensation. These approaches were applied not only for detemplation but also to promote topotactic condensation. By Interchain expansion, we synthesized two interrupted zeolites ZEO-4A and ZEO-4B using two different silane reagents to silylate and connect ZEO-2 chain precursors and obtained fullyconnected 3D extra-large pore zeolite ZEO-5 (HZF) by topotactic condensation of ZEO-4A and ZEO-4B., [ES] Para la síntesis hidrotérmica convencional, se han investigado los agentes orgánicos directores de estructura (OSDA, véase más adelante), el tipo y la cantidad de átomos T (es decir, átomos que participan como tetraedros en la estructura de la zeolita), el contenido de HF, el contenido de agua, la temperatura y el tiempo de cristalización en síntesis de silicatos, germanosilicatos, aluminosilicatos y aluminofosfatos. Hemos descubierto y caracterizado las zeolitas HPM-9 (estructura estable de bajo contenido en Ge isomórfica a UWY) y HPM-18 (estructura nueva), obtenidas mediante síntesis directa. También hemos obtenido tres precursores de zeolita (HPM-3, HPM-22 y HPM-23) que dan lugar a tres zeolitas (JSN, MTF y HEU, respectivamente) mediante condensación topotáctica. Estudiamos sistematicamente los parametros de calcinacion despues de la sintesis hidrotermal, incluyendo varias temperaturas y duraciones en dos tipos de calcinación (en aire y N2), así como una combinación de tratamiento con ozono seguido de calcinación con N2 para la condensación topotáctica de HPM-3. Estos enfoques se aplicaron no solo para la destemplación, sino también para promover la condensación topotáctica. Para la expansión entre cadenas, sintetizamos dos zeolitas interrumpidas, ZEO-4A y ZEO-4B, utilizando dos reactivos de silano diferentes sobre el silicato en cadena ZEO-2, y obtuvimos la zeolita ZEO-5 (HZF), de poros extragrandes en 3D y totalmente conectada en 3D, mediante condensación topotáctica de ZEO-4A y ZEO-4B., China Scolarship Council y agencia MCIN/AEI/10.13039/501100011033 (PID2022-137889OB-I00, TED2021-131223B-I00, RYC2022-036070-I, PID2019-105479RB-I00, PID2019-107968RB-I00, PID2021-128141OB-C22) Generalitat Valenciana (PROMETEO CIPROM/2021/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Amphotericin B intercalated in layered clays as effective antifungal systems against eumycetoma causative agents

  • Misol, Alexander
  • Sáez, Esther
  • Colom, María Francisca
  • Darder, Margarita
  • Aranda, Pilar
Eumycetoma and other subcutaneous mycosis are severe chronic infections with a high incidence in tropical and subtropical regions, whose current treatment has a low curation rate. In the search for more effective and affordable therapies, hybrid materials based on amphotericin B (AmB), an antifungal drug with a broad spectrum of action, appear promising for localized treatment at the site of infection. In this context, the immobilization of AmB in suitable nanocarriers would be helpful to minimize its adverse side effects and ensure a controlled release over time. For this purpose, montmorillonite (MMT), showing cation exchange capacity, and layered double hydroxides (LDH), with anion exchange capacity, are explored as possible supports, taking advantage of the amphoteric character of AmB. X-ray diffraction (XRD) confirms the intercalation of AmB in both the MMT-based and LDH-based hybrids. The protective effect of the inorganic layers on the encapsulated AmB avoiding its oxidation and agglomeration is also proven. A release study from the different supports is carried out in simulated wound fluid (SWF) and in Sabouraud Dextrose Broth (SDB) growth medium, showing a sustained release for at least 60 days. Furthermore, in vitro tests were carried out against two causative agents of eumycetoma, Aspergillus flavus and Subramaniula thielavioides species. These results confirmed the capacity of the two layered hybrids to inhibit the growth of both fungal strains, with the LDH-based hybrid showing a stronger growth inhibition effect on A. flavus., The authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S and the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00 and PID2022-137889OB-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00), as well as partial financial support by a grant for research projects linked to international development cooperation UMH-GVA (Spain), reference SOLCIF 2022/0005 (COD. 11-134-4-2023-0133)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting through-plane electrical conductivity: chitosan composite films with carbon-sepiolite and multiwalled carbon nanotubes

  • Barra, Ana
  • Ferreira, Nuno M.
  • Poças, Fátima
  • Ruiz-Hitzky, Eduardo
  • Nunes, Cláudia
  • Ferreira, Paula
Flexible and electrically conductive materials are gaining significant attention across various domains, notably in electronics, biomedicine and food industry. One promising strategy involves the integration of electrically conductive nanostructures into a polymeric matrix to fabricate composite materials. However, achieving uniform through-plane electrical conductivity remains a challenge due to the preferential alignment of carbon nanostructures in the in-plane direction. Herein, we report the development of electrically conductive chitosan (CS)-based biocomposite films incorporating a multicomponent filler system. By combining carbon supported on sepiolite clay (CARSEP) with multiwalled carbon nanotubes (MWCNT), it is aimed to facilitate an interconnected distribution in both in-plane and through-plane directions. The optimized film, featuring a CS/CARSEP/MWCNT mass ratio of 50/40/10, exhibited a maximum electrical conductivity of 55.5 S/m and 0.1 S/m in the in-plane and through-plane directions, respectively. Additionally, migration studies demonstrated the absence of harmful compounds upon heating the film up to 60 °C in air, ethanol, or hexane. These findings highlight the potential of these flexible and electrically conductive biocomposite films, primarily composed of biobased materials, for applications requiring through-plane electrical conductivity., This work was developed within the scope of the project CICECO - Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, i3N (LA/P/0037/2020, UIDB/50025/2020 and UIDP/50025/2020), and CBQF (UIDB/50016/2020) financed by national funds through the FCT/MCTES (PIDDAC). AB is thankful to FCT for grant SFRH/BD/148856/2019. CN is grateful to Portuguese national funds (OE), through FCT, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19 (DL 57/2016/CP1482/CT0031). ERH: acknowledge financial support from the MCIN/AEI/10.13039/501100011033 (Spain, project PID2019-105479RB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unusual high fluorescence of a 7,7′-diazaisoindigo derivative: A photophysical study

  • Moral, Mónica
  • García, Rocío
  • Garzón, Andrés
  • García-Frutos, Eva M.
7,7′-Diazaisoindigos are π-conjugated compounds but with poor luminescence properties. Their poor luminescence is generally attributed to the twisting around the central C7–C7′ bond in the excited state which favors non-radiative decay. We have found an unusual high fluorescence quantum yield (ΦF ≈ 15 %) in a N,N‑Octyl-7,7′-diazaisoindigo derivative incorporating two triphenylamine (TPA) subunits at 5,5′-positions (called compound 12). There are very few examples of fluorescent 7,7′-diazaisoindigos have been reported and the emission mechanism is generally associated by the hindering of the rotation around the central C7–C7′ bond. Unexpectedly, 12 also experiences a twisting around the central C7–C7′ bond in the excited state but is highly emissive. The intense fluorescence emission of 12 was attributed to the coexistence of two TPA-7-azaoxindole subunits acting as two fluorophores into a single molecule. The fluorescence emission of 12 is also sensitive to the polarity of the solvent. The intramolecular charge transfer character of the excited state was studied combining spectroscopic and theoretical methods., E.M.G.F acknowledges to the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00, PID2022-137889OB-I00 and TED2021-131223B-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00). This work is supported by ‘Universidad de Castilla-La Mancha’ (project 2022-GRIN-34143) and by the ‘Junta de Comunidades de Castilla-La Mancha’ (project SBPLY/21/180501/000042)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sandwich-type zeolite intergrowths with MFI and the novel extralarge pore IDM-1 as ordered end-members

  • Villaescusa, L. A.
  • Li, Jain.
  • Mayoral, Álvaro
  • Gao, Zihao Rei
  • Camblor, Miguel A.
Stacking faults are two-dimensional planar defects frequently arising in zeolites, modifying their properties and potentially affecting their performance in catalysis and separation applications. In classical zeolite intergrowths, a topologically unique zeolite layer may often pile up after some spatial transformation (lateral translation, rotation, and/or reflection) that may occur in different amounts or directions with about similar probabilities, leading to a difficult to control disorder. Here, we present a new kind of zeolite intergrowth that requires an additional topologically distinct layer rather than a spatial transformation of a unique one. Stacking of the so-called pentasil layers produces the well-known medium pore zeolite MFI. Intercalation in strict alternation of a topologically distinct second layer sandwiched between pentasil layers expands the structure to produce the new extra-large pore IDM-1. Stacking disorder modulates the structural expansion along the stacking direction. The disordered materials have been studied by simulation of the X-ray diffraction patterns using the program DIFFaX and by Cs-corrected high-resolution electron microscopy. We show that disorder does not occur at random but in extended domains and can be controlled all the way from MFI to IDM-1 by just varying the concentration of the synthesis mixture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interchain-expanded extra-large-pore zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez-Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel A.
Stable aluminosilicate zeolites with extra-large pores that are open through rings of more than 12 tetrahedra could be used to process molecules larger than those currently manageable in zeolite materials. However, until very recently1,2,3, they proved elusive. In analogy to the interlayer expansion of layered zeolite precursors4,5, we report a strategy that yields thermally and hydrothermally stable silicates by expansion of a one-dimensional silicate chain with an intercalated silylating agent that separates and connects the chains. As a result, zeolites with extra-large pores delimited by 20, 16 and 16 Si tetrahedra along the three crystallographic directions are obtained. The as-made interchain-expanded zeolite contains dangling Si–CH3 groups that, by calcination, connect to each other, resulting in a true, fully connected (except possible defects) three-dimensional zeolite framework with a very low density. Additionally, it features triple four-ring units not seen before in any type of zeolite. The silicate expansion–condensation approach we report may be amenable to further extra-large-pore zeolite formation. Ti can be introduced in this zeolite, leading to a catalyst that is active in liquid-phase alkene oxidations involving bulky molecules, which shows promise in the industrially relevant clean production of propylene oxide using cumene hydroperoxide as an oxidant