Skip to main content

DINAMICA EN SOLUCIONES ACUOSAS DE POLIMEROS Y BIOPOLIMEROS

PID2019-104650GB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From chemical structure to quantitative polymer properties prediction through convolutional neural networks

  • Miccio, Luis A.
  • Schwartz, Gustavo A.
In this work convolutional-fully connected neural networks were designed and trained to predict the glass transition temperature of polymers based only on their chemical structure. This approach has shown to successfully predict the Tg of unknown polymers with average relative errors as low as 6%. Several networks with different architecture or hiperparameters were successfully trained using a previously studied glass transition temperatures dataset for validation, and then the same method was employed for an extended dataset, with larger Tg dispersion and polymer's structure variability. This approach has shown to be accurate and reliable, and does not require any time consuming or expensive measurements and calculations as inputs. Furthermore, it is expected that this method can be easily extended to predict other properties. The possibility of predicting the properties of polymers not even synthesized will save time and resources for industrial development as well as accelerate the scientific understanding of structure-properties relationships in polymer science., We acknowledge the financial support provided by the Spanish Government "Ministerio de Ciencia e Innovacion" (PID2019-104650 GB-C21) and the Basque Government (IT-1175-19)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Localizing and quantifying the intra-monomer contributions to the glass transition temperature using artificial neural networks

  • Miccio, Luis A.
  • Schwartz, Gustavo A.
We used fully connected artificial neural networks (ANN) to localize and quantify, based on the monomer structure of several polymers, the specific features responsible for their observed glass transition temperatures (T). The use of ANNs allows us not only to successfully predict the T of the polymers but, even more important, to understand what parts of the monomer are mainly contributing to it. For this task, we used the weights of a trained ANN as obtained after fitting the input data (monomer structure) to the corresponding T value. The study was performed for a set of more than 200 atactic acrylates for which typical T defining features were identified. Thus, the ANN is able to recognize the relevance of the backbone stiffness, the length of pending groups or the presence of methyl groups on the value of the glass transition temperature. This approach can be easily extended to many other interesting properties of polymers and it is worth noting that only the monomer chemical structure is needed as input. This method is potentially useful for identifying orthogonal ways of tuning polymer properties during the design and development of new materials and it is expected that it will contribute to a better understanding of the polymer's behavior., We gratefully acknowledge the financial support from the Spanish Government “Ministerio de Ciencia e Innovación” (PID2019-104650GB-C21) and the Basque Government (IT-1175-19). We also acknowledge the support of NVIDIA Corporation with the donation of the Titan V GPU used for this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the microscopic origins of relaxation processes in aqueous peptide solutions undergoing a glass transition

  • Weigler, M.
  • Combarro-Palacios, Izaskun
  • Cerveny, Silvina
  • Vogel, Michael
We combine broadband dielectric spectroscopy (BDS) with 1H and 2H nuclear magnetic resonance (NMR) to study molecular dynamics in mixtures of ϵ-polylysine with H2O or D2O. In BDS, four relaxation processes can be attributed to molecular dynamics. While the fastest process P1 obeys the Arrhenius law, the slowest process P4 shows prominent non-Arrhenius behavior typical of structural α relaxation. For the intermediate processes P2 and P3, the temperature dependence changes at the glass transition temperature Tg. The 1H and 2H NMR results yield insights into the molecular origins of these relaxation phenomena. In these NMR analyses, we exploit, in addition to the isotope selectivity of the method, the possibility to distinguish between various types of motion based on their respective line-shape effects and the capability to single out specific molecular moieties based on different spin-lattice relaxation behaviors. In this way, we reveal that process P1 results from the rotation of side and end groups of the peptide, while process P2 is caused by a reorientation of essentially all water molecules, which are quasi-isotropic and survive well below Tg. As for the peptide backbone dynamics, we find evidence that rotational motion of polar groups is involved in process P3 and that nonpolar regions show a dynamical process, which is located between P3 and P4. Thus, the NMR analyses do not yield evidence for coexisting fast peptide-decoupled and slow peptide-coupled water species, which contribute to BDS processes P2 and P3, respectively, but minor bimodality of water motion may remain undetected. Finally, it is demonstrated that the proton/deuteron exchange needs to be considered when interpreting experimental results for molecular dynamics in aqueous peptide solutions., Financial support through the Grant Nos. Vo-905/8-2, PID2019-104650GB-C21, and LINKB20012 is gratefully acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Dynamics of water in partially crystallized solutions of glass forming materials and polymers: Implications on the behavior of bulk water

  • Cerveny, Silvina
  • Swenson, Jan
There is no simpler compound than water. It is the most copious substance on Earth and the most important constituent for life, as we know. There is also a continuous scientific interest due to its exceptional and infrequent properties, such as a density maximum at 4 ℃ (at atmospheric pressure), a high specific heat capacity, and a low viscosity under high pressure, among other macroscopic properties. The origin of the unusual properties of water is evidenced at lower temperatures in the no man’s land temperature region (235–150 K), where bulk water cannot remain in an amorphous state. Instead, in this region, bulk water crystallizes in a complex phase diagram with more than 16 crystalline phases. Therefore, most of the work done so far on supercooled water focuses on the investigation of the dynamics when crystallization is suppressed using different types of confinements, such as nano-cavities or by mixing water with other solutes (polymers, proteins, or DNA). On the contrary, in this chapter, we will use broadband dielectric spectroscopy to analyze the dynamics of aqueous solutions and confined water when it is partially crystallized, i.e., when liquid water and ice coexist. With this technique, it is possible to obtain information about the molecular relaxations in both amorphous and crystalline phases. We have analyzed the results of this semi-crystalline water and compared them with the response of supercooled water in fully amorphous solutions. Finally, we discuss the implications of these results on the behavior of bulk water., The authors gratefully acknowledge CSIC (i-LINK + program LINKB 20012), Spanish Ministerio de Ciencia, Innovacion y Universidades code: PID2019-104650GB-C21 (MCIU/AEI/FEDER, UE) and the Swedish Research Council (grant no. 2015-05434)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the microscopic origin of the cryoprotective effect in lysine solutions

  • Henao, Andrés
  • Ruiz, Guadalupe N.
  • Steinke, Nicola
  • Cerveny, Silvina
  • Macovez, Roberto
  • Guàrdia, Elvira
  • Busch, Sebastian
  • McLain, Sylvia E.
  • Lorenz, Christian D.
  • Pardo, Luis Carlos
The amino acid lysine has been shown to prevent water crystallization at low temperatures in saturated aqueous solutions [S. Cerveny and J. Swenson, Phys. Chem. Chem. Phys., 2014, 16, 22382–22390]. Here, we investigate two ratios of water and lysine (5.4 water molecules per lysine (saturated) and 11 water molecules per lysine) by means of the complementary use of computer simulations and neutron diffraction. By performing a detailed structural analysis we have been able to explain the anti-freeze properties of lysine by the strong hydrogen bond interactions of interstitial water molecules with lysine that prevent them from forming crystalline seeds. Additional water molecules beyond the 1 : 5.4 proportion are no longer tightly bonded to lysine and therefore are free to form crystals., This work was supported by the Spanish Ministry of Science and Innovation through the project FIS2014-54734-P, MINECO (grants FIS2015-66879-C2-1-P, FIS2017-82625-P and PID2019-104650GB-C21) and by the Generalitat de Catalunya under the projects 2014-SGR-581 and 2017-SGR-042. The UK Science and Technology Facilities Council is gratefully acknowledged for partial financial support and beam time access at the ISIS Facility (RB1220294). A. Henao would like to thank the Thomas Young Centre for the Junior research fellowship supporting a stay with C. D. Lorenz. S. Cerveny thanks CSIC (LINKB20012)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing arsenic adsorption via excellent dispersion of iron oxide nanoparticles inside poly(vinyl alcohol) nanofibers

  • Torasso, Nicolás
  • Vergara-Rubio, Alicia
  • Rivas-Rojas, Patricia
  • Huck-Iriart, Cristián
  • Larrañaga, Aitor
  • Fernández-Cirelli, Alicia
  • Cerveny, Silvina
  • Goyanes, Silvia
Superparamagnetic iron oxide nanoparticles (SPIONs) are great adsorbents of toxic arsenic in water. However, SPIONs efficiency is limited by a tendency towards agglomeration, and an extra filtering process is required in actual applications to avoid possible harmful effects of nanoparticles released to the environment. Here, we show a novel green method to confine and disperse SPIONs (10 nm) inside insoluble electrospun PVA nanofibers (final concentration 0.14 wt. %). We found that the resulting membrane has an enhanced arsenic adsorption capacity (> 52 mg/g) and presents a new adsorption mechanism, involving a high swelling of the superhydrophilic nanofibers before actual solution interchange can occur. A suitable heat treatment provided water insolubility to the membrane while maintaining hydrophilicity and active sites in the SPIONs. We show the excellent dispersion and homogeneous distribution of the SPIONs inside the nanofibers using electron microscopies and scale this analysis to an area of statistical significance via magnetic studies and novel Small and Wide Angle X-Ray Scattering SAXS/WAXS 2D scannings. The production process is environmentally friendly, given that only PVA was used as SPIONs dispersant and no chemicals were added for crosslinking. This work presents a novel material that expands the broad technological applications of both iron oxide nanoparticles and electrospinning, opening a route to new horizons in water purification., We kindly acknowledge the financial support of UBA (UBACYT 2018-2020 No 20020170100381BA), ANPCyT (PICT 2017-2362, PICT 2017-3150) and the Ministerio de Ciencia, Innovación y Universidades code PID2019-104650GB-C21 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mapping chemical structure–glass transition temperature relationship through artificial intelligence

  • Miccio, Luis A.
  • Schwartz, Gustavo A.
Artificial neural networks (ANNs) have been successfully used in the past to predict different properties of polymers based on their chemical structure and to localize and quantify the intramonomer contributions to these properties. In this work, we propose to move forward in order to use the mathematical framework of the ANN for embedding the chemical structure of monomers into a high-dimensional abstract space. This approach allows us not only to accurately predict the glass transition temperature (Tg) of polymers but, even more important, also to encode their chemical structure as m-dimensional vectors in a mathematical space. For this aim, we employed a fully connected neural network trained with a set of more than 200 atactic acrylates that provide the coordinates of the vectorized chemical structures into the m-dimensional space. These data points were then treated with a hierarchical nonparametric clusterization method in order to automatically group similar chemical structures into clusters with alike properties. These clusters were then projected into a human-readable three-dimensional space using principal component analysis. This approach allows us to deal with chemical structures as if they were mathematical entities and therefore to perform quantitative operations, so far hardly imaginable, being essential for both the design of new materials and the understanding of the structure–property relationships., We gratefully acknowledge the financial support from the Spanish Government “Ministerio de Ciencia e Innovación” (PID2019-104650GB-C21) and the Basque Government (IT-1175-19)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Complex networks reveal emergent interdisciplinary knowledge in Wikipedia

  • Schwartz, Gustavo A.
In the last 2 decades, a great amount of work has been done on data mining and knowledge discovery using complex networks. These works have provided insightful information about the structure and evolution of scientific activity, as well as important biomedical discoveries. However, interdisciplinary knowledge discovery, including disciplines other than science, is more complicated to implement because most of the available knowledge is not indexed. Here, a new method is presented for mining Wikipedia to unveil implicit interdisciplinary knowledge to map and understand how different disciplines (art, science, literature) are related to and interact with each other. Furthermore, the formalism of complex networks allows us to characterise both individual and collective behaviour of the different elements (people, ideas, works) within each discipline and among them. The results obtained agree with well-established interdisciplinary knowledge and show the ability of this method to boost quantitative studies. Note that relevant elements in different disciplines that rarely directly refer to each other may nonetheless have many implicit connections that impart them and their relationship with new meaning. Owing to the large number of available works and to the absence of cross-references among different disciplines, tracking these connections can be challenging. This approach aims to bridge this gap between the large amount of reported knowledge and the limited human capacity to find subtle connections and make sense of them., The author acknowledges the financial support from the Spanish Government ‘Ministerio de Ciencia e Innovación’ (PID2019-104650GB-C21) and from the Donostia International Physics Center (Programa Mestizajes), as well as the support of NVIDIA Corporation with the donation of a Quadro RTX 6000 GPU used for this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamics of aqueous peptide solutions in folded and disordered states examined by dynamic light scattering and dielectric spectroscopy

  • Melillo, Jorge H.
  • Gabriel, Jan Philipp
  • Pabst, Florian
  • Blochowicz, Thomas
  • Cerveny, Silvina
Characterizing the segmental dynamics of proteins, and intrinsically disordered proteins in particular, is a challenge in biophysics. In this study, by combining data from broadband dielectric spectroscopy (BDS) and both depolarized (DDLS) and polarized (PDLS) dynamic light scattering, we were able to determine the dynamics of a small peptide [ε-poly(lysine)] in water solutions in two different conformations (pure β-sheet at pH = 10 and a more disordered conformation at pH = 7). We found that the segmental (α-) relaxation, as probed by DDLS, is faster in the disordered state than in the folded conformation. The water dynamics, as detected by BDS, is also faster in the disordered state. In addition, the combination of BDS and DDLS results allows us to confirm the molecular origin of water-related processes observed by BDS. Finally, we discuss the origin of two slow processes (A and B processes) detected by DDLS and PDLS in both conformations and usually observed in other types of water solutions. For fully homogeneous ε-PLL solutions at pH = 10, the A-DLS process is assigned to the diffusion of individual β-sheets. The combination of both techniques opens a route for understanding the dynamics of peptides and other biological solutions., Financial support through the Grant No. PID2019-104650GB-C21 (Spanish Government “Ministerio de Ciencia, Innovacion y Universidades”), LINKB20012 (CSIC), Project No. IT-1175-19 (Basque Government) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Isotope effect on the dynamics of hydrophilic solutions at supercooled temperatures

  • Melillo, Jorge H.
  • Cerveny, Silvina
Broadband dielectric spectroscopy (BDS) is a highly versatile technique to analyze the dynamics of any material with a dipolar moment and therefore is very useful to study water solutions. Numerous studies have been performed in the last few years concerning the dynamics of water in hydrophilic solutions. Here, we examine the isotope effects on the dynamics of water in hydrophilic solutions at supercooled temperatures using BDS. The solutes used were tripropylene glycol (3PG) and pentaethylene glycol (5EG) in solution with three isotopes of water (H2O, D2O and H218O). We analyze the effects of the mass and moment of inertia as well as the impact of nuclear quantum effects (NQEs) on the dynamics of water. We show that for low water contents, the classical mass effect dominates the response, whereas for high water contents, NQEs drive the difference between the relaxation times of H2O and D2O. In addition, comparisons between solutions made with H2O and H218O show that the water molecule translational mobility freezes independently of the water content of the solutions., The authors gratefully acknowledge CSIC (i-LINK+program LINKB 20012) and Ministerio de Ciencia, Innovacion y Universidades code: PID2019-104650GB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hardening and fresh state behaviour of ternary cement for marine environments: Modification through nanoadditives

  • Matanza, Amaia
  • Perlot, Céline
  • Latapie, Ema
  • Cerveny, Silvina
This article belongs to the Special Issue Feature Papers in Construction and Building Materials., The use of nanomaterials to enhance the physical and mechanical properties and durability of cement materials in their hardened state has been studied for a long time in many investigations. In comparison, fewer studies focus on nanomaterials’ influence on the fresh state when the cement reaction starts. In addition, if we consider ternary blended cement (as those used for applications in marine environments), this has been rarely studied. Severe stresses in the marine environment require high durability, which is achieved by using pozzolanic additions, to the detriment of a rapid achievement of the properties. The addition of nanomaterials could contribute to increasing the durability and also accelerating the setting of the concrete. In this work, we performed a systematic and comparative study on the influence of adding graphene oxide (GO), nanosilica (NS), and microfibrillated cellulose (MFC) during the setting mechanisms of cement (CEM V/A suitable for concrete subjected to external attacks in marine environments) blended with fly ash and slag. Cement hardening was examined through setting time and rheology within mini-slump tests. The effect of nanoadditives on the cement hydration was analysed by heat flow calorimetry to evaluate the acceleration potential. Exploring the three nanoadditives on the same formulation, we could establish that the retention of mixing water significantly decreased workability for MFC. In contrast, NS increases the hydration of cement particles, acting as nucleation nodes and promoting supplementary cement hydrates (pozzolanic reactions) and accelerating setting time. Finally, GO showed a reduction in workability. We also investigated the dosage effects on mechanical behaviour at an early age and discovered an improvement even at low GO (0.006%) and NS (3%) dosages. We have also analysed the dosage effects on mechanical behaviour at an early age., This research was funded by the Euroregion Nouvelle Aquitaine-Euskadi-Navarre through DINaMO-FiVe research project and Grant No PID2019-104650GB-C21 (Agencia estatal de Investigacion, Spanish Government “Ministerio de Ciencia, Innovación y Universidades”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of ice formation on the dynamic and thermodynamic properties of aqueous solutions

  • Melillo, Jorge H.
  • Swenson, Jan
  • Cerveny, Silvina
Water dynamics in solutions with biological or non-biological solutes has been intensely studied when both components (solvent and solute) are amorphous. Here, we apply broadband dielectric spectroscopy combined with calorimetric measurements to analyze the dynamics of the aqueous solutions tri-propylene glycol (3PG) and ε-poly (lysine) (ε-PLL), after their water becomes semi-crystalline. Various crystallization levels were explored by conducting experiments with different annealing times at temperatures above the glass transition temperature (Tg). We find that the amount of ice depends on both the time and temperature of the annealing, and that this, in turn, affects Tg and dynamics of the amorphous part of the samples. However, it should be noted that the observed differences are relatively small for the degrees of crystallinity we have studied (up to about 26 wt% of the water). This also implies that the dynamic crossover of the water relaxation from a high temperature non-Arrhenius behavior to a low temperature Arrhenius dependence is unaffected by the partial crystallization and still occurs as a single crossover at the calorimetric Tg. Thus, we cannot detect two different crossovers, as commonly observed for other types of two-component systems, such as two glass formers., Financial support through the Grant Nos. PID2019-104650 GB-C21 (MICINN-Spain and FEDER-UE), LINKB20012 (CSIC), and IT1566-22 (Basque Government) are gratefully acknowledged, as well as the Grant No. 2019-04020 from the Swedish Research Council., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solvent-structured PEDOT:PSS surfaces: Fabrication strategies and nanoscale properties

  • Sanviti, Matteo
  • Mester, Lars
  • Hillenbrand, Rainer
  • Alegría, Ángel
  • Martínez-Tong, Daniel E.
We present the preparation of nanostructured conducting PEDOT:PSS thin films by solvent vapor annealing (SVA), using the low boiling point solvent tetrahydrofuran (THF). An Atomic Force Microscopy (AFM) study allowed the observation of distinct nanostructure development as a function of solvent exposure time. Moreover, the nanostructures’ physical properties were evaluated by nanomechanical, nanoelectrical, and nanoinfrared (nano-FTIR) measurements. In this way, we were able to differentiate the local response of the developed phases and to identify their chemical nature. The combination of these techniques allowed to demonstrate that exposure to THF is a facile method to effectively and selectively modify the surface nanostructure of PEDOT:PSS, and thereafter its final properties. Moreover, our nanoscale studies provided evidence about the molecular rearrangements that PEDOT:PSS suffers during nanostructure fabrication, a fundamental fact in order to expand the potential applications of this polymer in thermoelectric and optoelectronic devices., M. S., A. A. and D. E. M-T, acknowledge funding from the Basque Government (projects codes: IT-1175-19 and IT-1566-22) and the Spanish Ministry of Science and Innovation (MCIU/AEI/FEDER; EU. Code: PID2019-104650GB-C21). R. H. and L. M., acknowledge funding from the Spanish Ministry of Science and Innovation (projects codes: RTI2018-094830-B-100 and MDM-2016-0618 of the Maria de Maeztu Units of Excellence Program) and from the Basque Government (projects codes: IT1164-19)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Approaching polymer dynamics combining artificial neural networks and elastically collective nonlinear Langevin equation

  • Miccio, Luis A.
  • Borredon, Claudia
  • Casado, Ulises
  • Phan, Anh D.
  • Schwartz, Gustavo A.
This article belongs to the Special Issue Polymer Dynamics: Bulk and Nanoconfined Polymers., The analysis of structural relaxation dynamics of polymers gives an insight into their mechanical properties, whose characterization is used to qualify a given material for its practical scope. The dynamics are usually expressed in terms of the temperature dependence of the relaxation time, which is only available through time-consuming experimental processes following polymer synthesis. However, it would be advantageous to estimate their dynamics before synthesizing them when designing new materials. In this work, we propose a combined approach of artificial neural networks and the elastically collective nonlinear Langevin equation (ECNLE) to estimate the temperature dependence of the main structural relaxation time of polymers based only on the knowledge of the chemical structure of the corresponding monomer., We gratefully acknowledge the financial support from the Spanish Government “Ministerio de Ciencia e Innovación” (PID2019-104650GB-C21) and the Basque Government (IT1566-22). This research was also funded by the Vietnam National Foundation for Science and Technology Development (NAFOSTED) under grant number 103.01-2019.318. We also acknowledge the support of NVIDIA Corporation with the donation of the GPU used for this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bio-inspired membranes for adsorption of arsenic via immobilized L-Cysteine in highly hydrophilic electrospun nanofibers

  • Picón, David
  • Torasso, Nicolás
  • Vega Baudrit, José Roberto
  • Cerveny, Silvina
  • Goyanes, Silvia
Arsenic is a concern for its ubiquity in the environment and its accumulative and toxic properties. Water is often contaminated with this chemical, so developing simple, scalable, and green water treatment technologies is urgently needed. We show here that the ability of the L-Cysteine biomolecule to form complexes with arsenic inspires its use as a natural bio-inspired sorbent to develop advanced functional materials. We establish for the first time a way to chemically anchor L-Cysteine (L-Cys) inside highly hydrophilic nanofibers to create a membrane capable of lowering As(V) concentration below the WHO limit of 10 μg/L. A homogeneous precursor mixture of an aqueous solution of PVA and L-Cys (5 wt% and 10 wt% of L-Cys with respect to PVA) was electrospun to obtain a nanofibrous membrane. Successful immobilization of L-Cys within PVA nanofibers is achieved during heat treatment at 190 °C. It occurs through esterification reactions between the hydroxyl group on the PVA chain and the carboxylic acid on L-Cys. Arsenic sorption (as As(V)) was assessed by batch experiments in aqueous media and at a controlled pH range. The maximum removal efficiency was achieved at pH 7, supporting the formation of thiolate complexes as the primary mechanism for arsenic sorption. We show that L-Cys confinement makes arsenic diffusion inside the nanofibers a rate-limiting process in adsorption kinetics, following the pseudo first order equation. Overall, this work establishes a novel arsenic remediation strategy and encourages the research of nature-mimicking adsorbents and biodegradable polymers to develop functional materials in water remediation., We kindly acknowledge the financial support of University of Buenos Aires-UBA (UBACYT 2018–2020 N°20020170100381BA), ANPCyT (PICT 2017-2362), MINCyT (“Programa Ciencia y Tecnología Contra el Hambre” IF-2021-4378615-APN-SSCI#MCT), Consejo Superior de Investigacion Cientificas (CSIC), Spain (I-COOP+ 2020 COOPB20502), the Ministerio de Ciencia, Innovación y Universidades code PID2019-104650GB-C21 (MCIU/AEI/FEDER, UE) and IT1566-22 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Estimating glass transition temperature and related dynamics of molecular glass formers combining artificial neural networks and disordered systems theory

  • Borredon, Claudia
  • Miccio, Luis A.
  • Phan, Anh D.
  • Schwartz, Gustavo A.
Glass transition temperature and related dynamics play an essential role in amorphous materials research since many of their properties and functionalities depend on molecular mobility. However, the temperature dependence of the structural relaxation time for a given glass former is only experimentally accessible after synthesizing it, implying a time-consuming and costly process. In this work, we propose combining artificial neural networks and disordered systems theory to estimate the glass transition temperature and the temperature dependence of the main relaxation time based on the knowledge of the molecule's chemical structure. This approach provides a way to assess the dynamics of molecular glass formers, with reasonable accuracy, even before synthesizing them. We expect this methodology to boost industrial development, save time and resources, and accelerate the scientific understanding of structure-properties relationships., We gratefully acknowledge the financial support from the Spanish Government “Ministerio de Ciencia e Innovación" (PID2019-104650GB-C21) and the Basque Government (IT-1566-22). This research was also funded by the Vietnam National Foundation for Science and Technology Development (NAFOSTED) under grant number 103.01-2019.318. We also acknowledge the support of NVIDIA Corporation with the donation of two GPUs used for this research., We also acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron microscopy and calorimetry of proteins in supercooled water

  • Melillo, Jorge H.
  • Nikulina, Elizaveta
  • Iriarte-Alonso, Maiara A.
  • Cerveny, Silvina
  • Bittner, Alexander M.
Some of the best nucleating agents in nature are ice-nucleating proteins, which boost ice growth better than any other material. They can induce immersion freezing of supercooled water only a few degrees below 0 °C. An open question is whether this ability also extends to the deposition mode, i.e., to water vapor. In this work, we used three proteins, apoferritin, InaZ (ice nucleation active protein Z), and myoglobin, of which the first two are classified as ice-nucleating proteins for the immersion freezing mode. We studied the ice nucleation ability of these proteins by differential scanning calorimetry (immersion freezing) and by environmental scanning electron microscopy (deposition freezing). Our data show that InaZ crystallizes water directly from the vapor phase, while apoferritin first condenses water in the supercooled state, and subsequently crystallizes it, just as myoglobin, which is unable to nucleate ice., Financial support through the Spanish MINECO/MCIU grants Nos. PID2019-104650GB-C21/PID2019 104650GB is gratefully acknowledged. We were further supported by the following grants: Basque government IT1566-22, Basque Government Elkartek 2019, Maria de Maeztu “Units of Excellence” Program MDM 2016 0618, Cursum ADASTRA [project “Wetinflu TRAV”]. A.M.B. is indebted to the Erwin Schrödinger Intl. Institute (ESI) Vienna for the workshop DCC_2016 "water and interfaces"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adsorption of methylene blue and tetracycline by zeolites immobilized on a PBAT electrospun membrane

  • Picón, David
  • Vergara-Rubio, Alicia
  • Estevez-Areco, Santiago
  • Cerveny, Silvina
  • Goyanes, Silvia
This article belongs to the Special Issue Semi-solid Matrices in Non Conventional Solvents., The detection of emerging contaminants in bodies of water has steadily increased in recent years, becoming a severe problem threatening human and ecosystem health. Developing new materials with adsorption properties to remove these pollutants represents an important step toward a potential solution. In this paper, a polybutylene adipate terephthalate (PBAT) nanofibrous membrane incorporating clinoptilolite zeolite was developed and its excellent performance in removing tetracycline (TC) and methylene blue (MB) from water was demonstrated. The composite membrane was prepared in two steps: firstly, a homogeneous dispersion of clinoptilolite (1 wt% respect to polymer) in a PBAT solution (12.6 wt%) was electrospun; secondly, the electrospun membrane was subjected to an acid treatment that improved its wettability through the protonation of the surface silanol groups of clinoptilolite. The resulting membrane was hydrophilic and showed higher adsorption for TC (800 mg/g) and MB (100 mg/g), using a low dose (90 mg/L) powdered zeolite. The maximum removal capacity was obtained at neutral pH, being the cation exchange reaction the main adsorption mechanism. Pseudo-second-order kinetics and Henry's law agree well with the proposed chemisorption and the high affinity of TC and MB for the adsorbent. The material can be reused after the removal process without generating additional contamination, although losing some effectivity., This research was funded by Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT PICT 2017-2362, PICT 2019-03843 and PICT 2021-00017), Universidad de Buenos Aires (UBACyT 2018 20020170100381BA), Consejo Superior de Investigaciones Científicas (CSIC), Spain (I-COOP+ 2020 COOPB20502), Agencia Estatal de Investigaciones, Spanish Government “Ministerio de Ciencia, Innovación y Universidades” (PID2019-104650GB-C21), and MINCyT (“Programa Ciencia y Tecnología Contra el Hambre” IF-2021-4378615-APN-SSCI#MCT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An in situ approach to entrap ultra-small iron oxide nanoparticles inside hydrophilic electrospun nanofibers with high arsenic adsorption

  • Torasso, Nicolás
  • Vergara-Rubio, Alicia
  • Pereira, Reinaldo
  • Martínez-Sabando, Javier
  • Vega Baudrit, José Roberto
  • Cerveny, Silvina
  • Goyanes, Silvia
The problem of arsenic contamination in water demands sustainable, scalable, and easy-to-implement solutions. Various nano-adsorbents flourished in the last decade, but their use alone requires additional filtering processes to avoid environmental contamination. This work presents a simple, efficient, green approach to overcome this inconvenience while maximizing adsorption capacity. We show for the first time a novel approach to synthesizing ultra-small nanoparticles (IONPs) within electrospun hydrophilic poly(vinyl alcohol) (PVA) nanofibers, avoiding NPs release into the environment when submerged in water. The in-situ synthesis favor enhanced arsenic adsorption capacity due to the excellent dispersion, tiny size, and surface availability of IONPs, reaching 3.5 mg/g at 10 μg/L. We show that IONPs alter the polymeric matrix properties, such as the glass transition temperature and crystallinity, by preventing the formation of strong hydrogen bond inter/intramolecular interactions of PVA. Insolubility and swelling capacity are essential characteristics of this membrane, which allow solution interchange for arsenic adsorption onto IONPs. Isotherm studies show that the increase from 1 wt% to 3 wt% of IONPs content decreases the active sites for adsorption per mass of IONPs. Still, it does not alter the reusability of the membrane, which reaches at least 3 adsorption cycles with 80 % efficiency. We discuss the adsorption mechanisms and show that phosphate anions partially inhibit As(V) adsorption and that the membranes are also highly capable of removing Cr(VI), independently of the presence of Ni(II)., We kindly acknowledge the financial support of UBA (UBACYT 2018-2020 N°20020170100381BA), ANPCyT (PICT 2017-2362), MINCyT (“Programa Ciencia y Tecnología Contra el Hambre” IF-2021-4378615-APN-SSCI#MCT), CSIC (I-COOP2020 COOPB20502), the Ministerio de Ciencia, Innovación y Universidades code PID2019-104650 GB-C21 (MCIU/AEI/FEDER, UE) and IT1566-22 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A review of pectin-based material for applications in water treatment

  • Martínez-Sabando, Javier
  • Coin, Francesco
  • Melillo, Jorge H.
  • Goyanes, Silvia
  • Cerveny, Silvina
This article belongs to the Section Green Materials., Climate change and water are inseparably connected. Extreme weather events cause water to become more scarce, polluted, and erratic than ever. Therefore, we urgently need to develop solutions to reduce water contamination. This review intends to demonstrate that pectin-based materials are an excellent route to detect and mitigate pollutants from water, with several benefits. Pectin is a biodegradable polymer, extractable from vegetables, and contains several hydroxyl and carboxyl groups that can easily interact with the contaminant ions. In addition, pectin-based materials can be prepared in different forms (films, hydrogels, or beads) and cross-linked with several agents to change their molecular structure. Consequently, the pectin-based adsorbents can be tuned to remove diverse pollutants. Here, we will summarize the existing water remediation technologies highlighting adsorption as the ideal method. Then, the focus will be on the chemical structure of pectin and, from a historical perspective, on its structure after applying different cross-linking methods. Finally, we will review the application of pectin as an adsorbent of water pollutants considering the pectin of low degree methoxylation., The present work was supported by CSIC (I-COOP2020 COOPB20502), the Ministerio de Ciencia, Innovación y Universidades code PID2019-104650 GB-C21 (MCIN/ AEI /10.13039/501100011033), IT1566-22 (Basque Government), UBA (UBACYT 2018-2020 N°20020170100381BA), ANPCyT (PICT 2017-2362), MINCyT (“Programa Ciencia y Tecnología Contra el Hambre” IF-2021-4378615-APN-SSCI#MCT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The nature of the low-temperature crossover of water in hard confinement

  • Beilinson, Yael
  • Schiller, Verena
  • Regentin, Julia
  • Melillo, Jorge H.
  • Greenbaum, Anna
  • Antropova, Tatiana
  • Cerveny, Silvina
  • Vogel, Michael
  • Feldman, Yuri
The dynamics of water confined in mesoporous MIP (2–3 nm pores in size) with silica gel (secondary silica; further, the abbreviation SG will be used) and MAP (10–35 nm pores in size) without SG borosilicate glasses have been studied by broadband dielectric spectroscopy (BDS), nuclear magnetic resonance (NMR), and differential scanning calorimetry (DSC). MIP samples contain secondary silica inside the pores and provide a confinement size of about 2–3 nm, whereas MAP samples are free of secondary silica and provide a confinement size of about 10–35 nm. It is shown by BDS and NMR techniques that water exhibits a dynamic crossover of around 180 K when it is confined in MIP samples. By contrast, water confined in larger pores (MAP) does not exhibit any changes in its relaxation behavior. It is also shown that the crossover temperature depends on the hydration level (the higher the hydration level, the lower the crossover temperature). Below the crossover temperature, we find that water reorientation is isotropic (NMR) and that the temperature-dependent dielectric relaxation strength (BDS) follows the tendency expected for a solid-like material. In contrast, water reorientation is related to long-range diffusion above the crossover temperature, and the dielectric relaxation strength follows the tendency expected for a liquid-like material. Furthermore, the calorimetric results are compatible with crossing a glass transition near 180 K. Finally, the results are discussed within the Gibbs–Thomson model. In this framework, the crossover could be related to ice crystals melting., The work was partially carried out under the Israel – Russian Agreement on International Research Cooperation (since 2019, joint research project “The dynamic crossover phenomenon in the hydrated nanoporous glasses”). The fragment of this work related to the synthesis of glasses and characterization of their porous structure was supported by the Ministry of Science and Higher Education of the Russian Federation as part of the IChS RAS state assignment no. 1021050501068-5-1.4.3. The study was performed with the support from the Israel Ministry of Aliyah and Integration. J.H.M. and S.C. also acknowledge the financial support through the grant nos. PID2019-104650GB-C21 (MICINN-Spain and FEDER-UE) and IT1566-22 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterising the glass transition temperature-structure relationship through a recurrent neural network

  • Borredon, Claudia
  • Miccio, Luis A.
  • Cerveny, Silvina
  • Schwartz, Gustavo A.
Quantitative structure-property relationship (QSPR) is a powerful analytical method to find correlations between the structure of a molecule and its physicochemical properties. The glass transition temperature (Tg) is one of the most reported properties, and its characterisation is critical for tuning the physical properties of materials. In this work, we explore the use of machine learning in the field of QSPR by developing a recurrent neural network (RNN) that relates the chemical structure and the glass transition temperature of molecular glass formers. In addition, we performed a chemical embedding from the last hidden layer of the RNN architecture into an m-dimensional Tg-oriented space. Then, we test the model to predict the glass transition temperature of essential amino acids and peptides. The results are very promising and they can open the door for exploring and designing new materials., We gratefully acknowledge the financial support from the Spanish Government Ministerio de Ciencia e Innovación Research Project PID2019-104650GB-C21 / PID2022-138070NB-C22 MCIN/ AEI /10.13039/501100011033 and the Basque Government (IT-1566-22). We also acknowledge the support of NVIDIA Corporation with the donation of two GPUs used for this research., We also acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dual crosslinking of low-methoxyl pectin by calcium and europium for the simultaneous removal of pharmaceuticals and divalent heavy metals

  • Martínez-Sabando, Javier
  • Coin, Francesco
  • Raposo, Juan Carlos
  • Larrañaga, Aitor
  • Melillo, Jorge H.
  • Cerveny, Silvina
The contamination of water resources by heavy metals and pharmaceuticals is a significant threat to human health and the environment. Pectin is a promising material for removing heavy metals from water. However, its removal efficacy for other types of pollutants is limited. In this study, we developed a novel approach to enhance the remediation capacity of pectin (with a low degree of methylation) by crosslinking it with different agents: calcium, europium, and their combination. We performed scanning electron microscopy, infrared spectroscopy, and X-ray diffraction experiments to understand the molecular structure of pectin after gelation with the three agents. Our results showed that calcium, europium, and their combination all induce the gelation of pectin. However, the reticulated pectin structures exhibited significant structural differences depending on the type of crosslinking agent used, which affected the adsorption capacity. Specifically, calcium cations partially formed a crystalline “egg-box” structure, whereas europium cations produced a more homogeneous network without crystalline regions. The dual-crosslinking system comprising calcium and europium cations resulted in an intermediate network with both crystalline and amorphous regions. Our findings suggest that dual-cross-linked pectin is a highly effective adsorbent for the simultaneous removal of both heavy metals and pharmaceutical products. This novel approach of crosslinking pectin with multiple agents has the potential to significantly enhance its remediation capacity, offering a promising solution for the simultaneous removal of multiple pollutants from water., This work was supported by the Ministerio de Ciencia, Innovación y Universidades code PID2019-104650GB-C21 (MCIN/AEI/10.13039/501100011033), CSIC (I-COOP2020 COOPB20502), and IT1566-22 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Pectin-based adsorbents for remediation of contaminated water with pharmaceutical products and heavy metals

  • Martínez-Sabando, Javier
Programa de Doctorado Física de Nanoestructuras y Materiales Avanzados., [EN] On our planet, we can see water in all its forms: gaseous in the clouds, solid in the glaciers, or liquid in rivers or seas. Water is essential for life on Earth since it adequately regulates the environment's temperature and, therefore, becomes a factor that determines the survival of fauna and flora. In humans, water is directly related to transporting nutrients, eliminating toxins, lubricating tissues, and participating in chemical and metabolic reactions. We can raise animals, farm, wash food, or maintain good hygiene with water. Until the 20th century, water was considered an inexhaustible resource. However, the growth of the world population and climate change have meant that in the 21st century, it has become a scarce commodity. In addition, the available water is contaminated mainly by human activities such as agriculture, livestock, and industry and partially by natural reasons such as volcanic eruptions. In this context, it has become crucial to have methodologies or systems that allow us to decontaminate or remediate the water we have efficiently and economically. This thesis will focus on developing adsorbents for the remediation of contaminated freshwater. While there are many different types of contaminants, I will focus on "emerging contaminants," a collection of molecules found in freshwater that encompass personal care products, drugs, pesticides, and other industrial chemicals. In fact, during 2023, the European and Spanish regulations for drinking water will include an extensive list of these contaminants. Heavy metals come from natural sources (such as the erosion of rocks composed of heavy metals or volcanic eruptions) or human activity (mining and industrial discharges). Prolonged water consumption contaminated by heavy metals can cause serious health problems since they cannot be metabolized and accumulate in specific tissues. Different government entities (such as the European Union (EU), the World Health Organization (WHO), and the Environmental Protection Agency (EPA, United States) have established the maximum concentrations allowed in drinking water for each type of metal. Pharmaceuticals come strictly from human activity. The primary sources of antibiotic contamination are the effluents from factories producing hospitals and personal use of these compounds. However, the most significant discharge comes from veterinary use in livestock and aquaculture productions. The biggest problem with the presence of antibiotics in drinking water is the risk of contributing to the generation of resistant bacteria. These bacteria can develop genes for resistance to these antibiotics, with the resulting chance that if a person becomes ill with this type of bacteria, the antibiotics to which the bacterium has been exposed will have no effect in remitting the infection. Regarding regulation, more research is still needed to determine the limits of antibiotics levels in fresh water and the potential damage that these can cause in the long term. Among the most modern treatments to mitigate the impact of emerging contaminants in water are ultraviolet irradiation, bio-electrochemical systems, oxidative processes, membrane filtration, and adsorption. This thesis has chosen adsorption due to its low cost, simple design, low energy requirement, and biodegradability of the materials used. Another premise that we have used is the non-use of nanoparticles. This thesis will focus on the adsorption method to mitigate the impact of emerging pollutants. Adsorption is a phenomenon in which molecules, atoms, or ions present in an aqueous solution are retained on the surface of a solid material through chemical or physical interactions. Numerous adsorbents, such as activated carbon, zeolites, and mineral clays, have been developed to treat contaminated water. The material chosen for adsorption is pectin. Pectin is a heteropolysaccharide present in the cell wall of higher plants. It is found in large quantities in fruits. It is a very economical material since it can be extracted from discards generated by the juice industry (citrus peels or apple pulp). This way, a discard is reused to give it a second use, thus stimulating the circular economy. In addition, it is a biodegradable material., [ES] En nuestro planeta podemos ver agua en todas sus formas: gaseosa en las nubes, sólida en los glaciares, o líquida en ríos o mares. El agua es trascendental para la vida en la tierra ya que regula la temperatura del medio ambiente adecuadamente y, por lo tanto, se convierte en un factor que determina la supervivencia de la fauna y flora. En los seres humanos, el agua está directamente relacionada con el transporte de nutrientes, la eliminación de toxinas o la lubricación de tejidos participando en las reacciones químicas y en las reacciones metabólicas. Sin agua no podríamos además criar animales, cultivar, lavar los alimentos o mantener una buena higiene. Hasta el siglo XX el agua se ha considerado un recurso inagotable. Sin embargo, el crecimiento de la población mundial y el cambio climático han provocado que en el siglo XXI se haya convertido en un bien escaso. Además, el agua disponible está contaminada fundamentalmente por actividades humanas como la agricultura, ganadería, industria y, parcialmente por razones naturales como erupciones volcánicas. En este contexto se ha vuelto crucial disponer de metodologías o sistemas que permitan de una manera eficiente y económica descontaminar o remediar el agua que disponemos. Esta tesis se centrará en el desarrollo de adsorbentes para la remediación de agua dulce contaminada. Si bien existen muchos tipos de contaminantes diferentes, me concentraré en los llamados “contaminantes emergentes”, una colección de moléculas presente en agua dulce que engloban los productos de cuidado personal, fármacos, plaguicidas y otros productos químicos industriales. De hecho, durante 2023 las regulaciones europeas y españolas del agua para consumo incluirán una extensa lista de estos contaminantes. Los metales pesados proceden de fuentes naturales (como la erosión de rocas compuestas por metales pesados o las erupciones volcánicas) o por actividad humana (la minería y los vertidos industriales). El consumo prolongado de agua contaminada por metales pesados puede acarrear serios problemas de salud, ya que no se pueden metabolizar y se acumulan en tejidos específicos. Diferentes entidades gubernamentales (Unión Europea (UE), la Organización Mundial para la Salud (OMS) o la Environmental Protection Agency (EPA, Estados Unidos) han establecido las concentraciones máximas permitidas en agua potable para cada tipo de metal. En lo que se refiere a los fármacos, estos provienen estrictamente de la actividad humana. Las principales fuentes de contaminación por antibióticos son los efluentes de las fábricas productoras de hospitales y del uso personal de estos compuestos. Sin embargo, el mayor vertido proviene del uso veterinario en producciones ganaderas y acuícolas. El mayor problema de la incorporación de antibióticos en el agua es el riesgo de contribuir a la generación de bacterias resistentes. Estas bacterias pueden desarrollar genes de resistencia hacia esos antibióticos, con el resultante riesgo de que, si una persona se enferma con este tipo de bacterias, los antibióticos a los cuales ha estado expuesta esa bacteria no tendrán efecto para remitir la infección. En cuanto a la regulación, aun se necesita más investigación para determinar los límites de antibióticos en agua y el daño potencial que estos pueden causar a largo plazo. Entre los tratamientos más modernos para la mitigación del impacto de contaminantes emergentes en agua se encuentran la irradiación ultravioleta, sistemas bio-electroquímicos, procesos oxidativos, filtración por membrana y adsorción. En esta tesis, se ha elegido la adsorción debido a su bajo coste, diseño simple, bajo requerimiento energético y bio-degradablilidad de los materiales empleados. Otra premisa que hemos utilizado es la no utilización de nano-partículas. Esta tesis se centrará en el método de adsorción para mitigar el impacto de los contaminantes emergentes. La adsorción es un fenómeno en el que moléculas, átomos o iones presentes en una solución acuosa se retienen en la superficie de un material sólido por medio de interacciones químicas o físicas. Numerosos tipos de adsorbentes han sido desarrollados para el tratamiento de aguas contaminadas, como el carbón activado, zeolitas o arcillas minerales. El material base elegido para la adsorción es la pectina. La pectina es un heteropolisacárido presente en la pared celular de plantas superiores. Se encuentra en grandes cantidades en frutos. Es un material económico ya que se puede extraer de descartes que genera la industria del zumo (cáscaras de cítricos o la pulpa de la manzana). De esta manera se reaprovecha un descarte para darle un segundo uso, por lo que se estimula la economía circular. Además, se trata de un material biodegradable., Quisiera agradecer a la fundación Materials Physics Center (MPC-BERC) por el contrato durante toda mi tesis. También quisiera agradecer el aporte económico de diferentes proyectos (Ministerio de Ciencia, Innovación y Universidades– Agencia Estatal de Investigación, PID2019-104650GB-C21 y CSIC, COOPB20502) que hicieron posible la realización del doctorado., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of ferrocene on physicochemical properties of biochar extracted from windmill palm tree (Trachycarpus fortunei)

  • Adel, Abeer M.
  • Martínez-Sabando, Javier
  • Al‑Shemy, Mona T.
  • Cerveny, Silvina
The transformation of agro-waste into biochar using thermochemical processes aids in the management and disposal of biomass with the potential to provide significant energy. Different biochars exhibit different characteristics and performances depending on the fabrication method employed. Besides, many applications, such as remediation to adsorb heavy metals which favor biochars rich with oxygen-containing functional groups on their surface. Therefore, this study deals with the catalytic carbonization of the rachis part in windmill palm trees with ferrocene at different temperatures (300, 350, 450, and 500 °C), time intervals (25, 40, and 90 min.), and ratios (3:1, 3:2, and 3:3 palm tree: ferrocene ratio) to produce oxidized nanobiochar. The highest electronegativity’s (− 61.8 and − 64 mV) for PTONB were observed when samples were prepared at 350 °C, 90 min., 3:1 PT: F and 350 °C, 25 min., 3:2 PT: F, respectively. Morphological analysis showed that, the carbonization of windmill palm tree at 350 °C, 90 min. without ferrocene give spherical nano-biochar with bulky particle size of 237 nm. However, after ferrocene treatment, the nanobiochar particle size was reduced, ranging from 87 to 3 nm. Thus, the ferrocene/palm tree catalytic carbonization process is highly relevant to decreasing particle sizes. Consequently, based on the findings from physicochemical analyses (e.g., SEM-EDX, ATR-FTIR, X-ray diffraction, and high-resolution TEM), a straightforward and rapid method to synthesize an oxidized nano-biochar, with a wide variety of structural characterizations, at a low temperature in a single step under a muffled atmosphere has been developed., This research was partially supported by the Women for Africa Foundation (FMxA) program. The authors thank The Women for Africa Foundation (FMxA) program for this opportunity to complete the project in Material Physics Center (CFM). We kindly acknowledge the financial support of CSIC (I-COOP + 2020 COOPB20502), and the Ministerio de Ciencia, Innovación y Universidades code PID2019-104650GB-C21 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A glimpse inside materials: Polymer structure – Glass transition temperature relationship as observed by a trained artificial intelligence

  • Miccio, Luis A.
  • Borredon, Claudia
  • Schwartz, Gustavo A.
Artificial neural networks (ANNs), a subset of Quantitative Structure-Property Relationship (QSPR) methods, offer a promising avenue for addressing challenges in materials science. In particular, ANNs can learn intricated patterns within the experimental data, enabling them to predict properties and recognize complex relationships with remarkable accuracy. However, the opacity of ANNs, normally acting as black boxes, raises concerns about their reliability and interpretability. To enhance their transparency and to uncover the underlying relationships between chemical features and material properties, we propose a novel approach that employs Gradient-weighted Class Activation Mapping (Grad-CAM) applied to Convolutional Neural Networks (CNNs). By analyzing these attention maps, we identify the crucial chemical features influencing the prediction of a polymer property, specifically the glass transition temperature (Tg). Our methodology is validated using a dataset of atactic acrylates, allowing us to not only predict Tg values for a control group of polymers but also to quantitatively assess the impact of individual monomer structural elements on these predictions. This work proposes a step towards transparent models in materials science, contributing to a deeper understanding of the intricate relationship between chemical structures and material properties., We gratefully acknowledge the financial support from the Spanish Government Ministerio de Ciencia e Innovación Research Project PID2019-104650GB-C21 / PID2022-138070NB-C22 MCIN/ AEI /10.13039/501100011033 and the Basque Government (IT-1566-22). We also acknowledge the support of NVIDIA Corporation with the donation of two GPUs used for this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transfer learning-driven artificial intelligence model for glass transition temperature estimation of molecular glass formers mixtures

  • Borredon, Claudia
  • Miccio, Luis A.
  • Schwartz, Gustavo A.
Predicting binary mixtures’ glass transition temperature (Tg) is crucial in various fields, particularly for industrial materials affected by this property during production processes and in service-life. On the other hand, from the fundamental point of view, this predictive capability is relevant for understanding the chemical interactions between the two components and how this affects the Tg of the mixture. In this sense, some models provide different approaches for describing the Tg of the mixture. Among them, the Gordon-Taylor approach has been widely used since it only relies on the relationship between the Tg of the pure components, their weight fraction, and only one fitting parameter. Although simple, this approach still requires measurements of Tg of the pure components and at least some intermediated composition for the fitting procedure. In a previous work, our research has focused on neural networks methods for predicting Tg values directly from the chemical structure of monomers and molecules, but the scarcity of experimental data for binary mixtures limits the application of a similar approach. To address this problem, we propose to use in this work a transfer learning method that relays on the previous acquired knowledge of the chemical structure - Tg relationship, for the prediction of the Tg of the binary mixtures. Therefore, pure component characteristics are derived from chemical fingerprints originated in a pre-trained network, and enables a training process focused on their behavior within the mixtures. This approach successfully estimated K with very low deviations, even allowing for the exploration of the embedded chemical structure’s relation to previously unknown mixtures., We gratefully acknowledge the financial support from the Spanish Government Ministerio de Ciencia e Innovación Research Project PID2019-104650 GB-C21 / PID2022-138070NB-C22 MCIN/ AEI /10.13039/501100011033 and the Basque Government (IT-1566-22). We also acknowledge the support of NVIDIA Corporation with the donation of two GPUs used for this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient antibiotic removal from water using europium-doped poly(vinyl alcohol) nanofiber mats esterified with citric acid

  • Coin, Francesco
  • Rodríguez-Ramírez, C. A.
  • Sanchez Oyarbide, Facundo
  • Picón, David
  • Goyanes, Silvia
  • Cerveny, Silvina
Increasing antibiotic pollution in water poses both environmental and health risks, contributing to an increase in antibiotic-resistant bacteria. This study proposes a novel adsorbent made of nanofibers of poly(vinyl alcohol) (PVA) created through electrospinning incorporating europium and citric acid that has exceptional adsorption capacities for ciprofloxacin (563.7 mg/g) and tetracycline (235.8 mg/g), two antibiotics of everyday use. Our findings demonstrate that this combination results in a swollen fiber structure where europium and citric acid remain immobilized even when in contact with water and promotes the creation of antibiotic chelation sites. Moreover, the adsorbent maintained its performance for four cycles and two reactivations. Finally, we studied how the adsorption of antibiotics is affected by other contaminants commonly found in water, such as dyes (methylene blue and/or rhodamine) and pesticides (atrazine). This innovative approach involving the use of esterified-doped PVA nanofiber has significant potential for enhancing remediation capacity and represents a promising solution for removing antibiotics from multipolluted water., Projects PID2019-104650GB-C21 and PID2023-146348NB-I00 funded by MCIN/AEI/10.13039/501100011033, IT1566-22 funded by Basque Government, BILAT23076 funded by CSIC. We kindly acknowledge the financial support of UBA (UBACYT 2023 N°20020220200117BA and PDE_2_2024), ANPCyT (PICT 2021-I-A-01218 ) and PIP 2022-2024 GI. Francesco Coin and Silvina Cerveny acknowledge the mobility program IMOVE CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Complexity of confined water vitrification and its glass transition temperature

  • Melillo, Jorge H.
  • Cangialosi, Daniele
  • Di Lisio, Valerio
  • Steinrücken, Elisa
  • Vogel, Michael
  • Cerveny, Silvina
[Significance] The current understanding of the glass transition temperature (Tg) in confined water is highly debated, hindering our comprehension of various biological and terrestrial phenomena. This study resolves this controversy by identifying three distinct contributions to the calorimetric response of supercooled confined water. We demonstrate that confined water has a Tg in the 170 to 200 K range, depending on the confinement size and wall interactions. The fast and standard calorimetry and dielectric spectroscopy results linking the glass transition with the dynamics support this observation. Furthermore, our findings reveal thermal events at temperatures higher and lower than the Tg, which are connected to the adsorption/desorption of water at the inner surfaces and an “annealing prepeak” or, equivalently, “shadow glass transition,” respectively., The ability of vitrification when crossing the glass transition temperature (Tg) of confined and bulk water is crucial for myriad phenomena in diverse fields, ranging from the cryopreservation of organs and food to the development of cryoenzymatic reactions, frost damage to buildings, and atmospheric water. However, determining water’s Tg remains a major challenge. Here, we elucidate the glass transition of water by analyzing the calorimetric behavior of nano-confined water across various pore topologies (diameters: 0.3 to 2.5 nm). Our approach involves subjecting confined water to annealing protocols to identify the temperature and time evolution of nonequilibrium glass kinetics. Furthermore, we complement this calorimetric approach with the dynamics of confined water, as seen by broadband dielectric spectroscopy and linear calorimetric measurements, including the fast scanning technique. This study demonstrated that confined water undergoes a glass transition in the temperature range of 170 to 200 K, depending on the confinement size and the interaction with the confinement walls. Moreover, we also show that the thermal event observed at ~136 K must be interpreted as an annealing prepeak, also referred to as the “shadow glass transition.” Calorimetric measurements also allow the detection of a specific heat step above 200 K, which is insensitive to annealing and, thereby, interpreted as a true thermodynamic transition. Finally, by connecting our results to bulk water behavior, we offer a comprehensive understanding of confined water vitrification with potential implications for numerous applications., We acknowledge grant No. PID2019-104650 GB-C21 and PID2023-146348NB-I00 funded by Ministerio de Ciencia, Innovación y Universidades/Agencia Estatal de Investigación (MCIN/AEI) and Eusko Jaurlaritza, code: IT1566-22. Financial support by the Deutsche Forschungsgemeinschaft, Project No. 492723217 (CRC 1585), subproject A04 is gratefully acknowledged., Peer reviewed