Skip to main content

VIDRIOS ORGANICOS Y METALICOS: DINAMICA, RECRISTALIZACION Y PROPIEDADES VIBRACIONALES

FIS2017-82625-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Emergence of glassy features in halomethane crystals

  • Moratalla, M.
  • Gebbia, J.F.
  • Ramos, M. A.
  • Pardo, L. C.
  • Mukhopadhyay, S.
  • Rudic, S.
  • Fernández-Alonso, Félix
  • Bermejo, Francisco Javier
  • Tamarit, J. L.
9 pags. 5 figs., Both structural glasses and disordered crystals are known to exhibit anomalous thermal, vibrational, and acoustic properties at low temperatures or low energies, what is still a matter of lively debate. To shed light on this issue, we studied the halomethane family CBrnCl4-n (n=0,1,2) at low temperature where, despite being perfectly translationally ordered stable monoclinic crystals, glassy dynamical features had been reported from experiments and molecular dynamics simulations. For n=1,2 dynamic disorder originates by the random occupancy of the same lattice sites by either Cl or Br atoms, but not for the ideal reference case of CCl4. Measurements of the low-temperature specific heat (Cp) for all these materials are here reported, which provide evidence of the presence of a broad peak in Debye-reduced Cp(T)/T3 and in the reduced density of states (g(ω)/ω2) determined by means of neutron spectroscopy, as well as a linear term in Cp usually ascribed in glasses to two-level systems in addition to the cubic term expected for a fully ordered crystal. Being CCl4 a fully ordered crystal, we also performed density functional theory (DFT) calculations, which provide unprecedented detailed information about the microscopic nature of vibrations responsible for that broad peak, much alike the >'boson peak> of glasses, finding it to essentially arise from a piling up (at around 3-4 meV) of low-energy optical modes together with acoustic modes near the Brillouin-zone limits., The authors are grateful for the financial support received within Projects No. FIS2017-82625-P and No. FIS2017- 84330-R from MINECO. We also acknowledge the Generalitat de Catalunya under Project No. 2017SGR-042 and the Autonomous Community of Madrid through program NANOFRONTMAG-CM (S2013/MIT-2850). One of us (M.A.R.) also acknowledges the “María de Maeztu” Program for Units of Excellence in R&D (MDM-2014-0377). The authors gratefully acknowledge the Science & Technology Facilities Council for financial support for this project, including personnel training and visits to the ISIS Molecular Spectroscopy Group, access to beam time at the ISIS Facility (RB910454, RB1320105), as well as computing resources from the STFC Scientific Computing Department’s SCARF cluster.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning molecular dynamics by hydration and confinement: Antiplasticizing effect of water in hydrated prilocaine nanoclusters

  • Ruiz, Guadalupe N.
  • Combarro-Palacios, Izaskun
  • McLain, Sylvia E.
  • Schwartz, Gustavo A.
  • Pardo, Luis Carlos
  • Cerveny, Silvina
  • Macovez, Roberto
In glass-forming substances, the addition of water tends to produce the effect of lowering the glass transition temperature, T. In a previous work by some of us (Ruiz et al., Sci. Rep., 2017, 7, 7470) we reported on a rare anti-plasticizing effect of water on the molecular dynamics of a simple molecular system, the pharmaceutically active prilocaine molecule, for which the addition of water leads to an increase of T. In the present work, we study pure and hydrated prilocaine confined in 0.5 nm and 1 nm pore size molecular sieves, and carry out a comparison with the bulk compounds in order to gain a better understanding of the microscopic mechanisms that result in this rare effect. We find that the T of the drug under nanometric confinement can be lower than the bulk value by as much as 17 K. Through the concurrent use of differential scanning calorimetry and broadband dielectric spectroscopy we are able to observe the antiplasticizing effect of water in prilocaine also under nanometric confinement, finding an increase of T of up to almost 6 K upon hydration. The extension of our analysis to nanoconfined systems provides a plausible explanation for the very uncommon antiplasticizing effect, based on the formation of water-prilocaine molecular complexes. Moreover, this study deepens the understanding of the behavior of drugs under confinement, which is of relevance not only from a fundamental point of view, but also for practical applications such as drug delivery., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness MINECO through project FIS2017-82625-P and through the project MAT2015-69547-R, and by the Generalitat de Catalunya under project 2017SGR-42. We also thanks Elkartek program (nG17, KK-2017/00012) and the Bask Government under project IT-1175-19
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Secondary relaxation in the terahertz range in 2-Adamantanone from theory and experiments

  • Cui B.
  • Gebbia, J.F.
  • Romanini, M.
  • Rudic, S.
  • Fernández-Perea, Ricardo
  • Bermejo, Francisco Javier
  • Tamarit, J.L.
  • Zaccone, A.
7 pags., 7 figs., 1 tab., We applied the recently developed Generalized Langevin equation (GLE) approach for dielectric response of liquids and glasses to link the vibrational density of states (VDOS) to the dielectric response of a model orientational glass. The dielectric functions calculated based on the GLE, with VDOS obtained in experiments and simulations as input, are compared with experimental data for the paradigmatic case of 2-Adamantanone at various temperatures. The memory function is related to the integral of the VDOS times a spectral coupling function γ(ωp), which tells the degree of dynamical coupling between molecular degrees of freedom at different eigenfrequencies. With respect to previous empirical fittings, the GLE-based fitting reveals a broader temperature range over which the secondary relaxation is active. Furthermore, the theoretical analysis provides clear evidence of secondary relaxation being localized within the THz (0.5-1 THz) range of eigenfrequencies, and thus not too far from the low-energy modes involved in α relaxation. In the same THz region, the same material displays a crowding of low-energy optical modes that may be related to the secondary relaxation., B.C. acknowledges the financial support of CSCCambridge Scholarship. J.L.T. acknowledges MINECO (No. FIS2017-82625-P) and the Catalan government (No. SGR2017-042) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the microscopic origin of the cryoprotective effect in lysine solutions

  • Henao, Andrés
  • Ruiz, Guadalupe N.
  • Steinke, Nicola
  • Cerveny, Silvina
  • Macovez, Roberto
  • Guàrdia, Elvira
  • Busch, Sebastian
  • McLain, Sylvia E.
  • Lorenz, Christian D.
  • Pardo, Luis Carlos
The amino acid lysine has been shown to prevent water crystallization at low temperatures in saturated aqueous solutions [S. Cerveny and J. Swenson, Phys. Chem. Chem. Phys., 2014, 16, 22382–22390]. Here, we investigate two ratios of water and lysine (5.4 water molecules per lysine (saturated) and 11 water molecules per lysine) by means of the complementary use of computer simulations and neutron diffraction. By performing a detailed structural analysis we have been able to explain the anti-freeze properties of lysine by the strong hydrogen bond interactions of interstitial water molecules with lysine that prevent them from forming crystalline seeds. Additional water molecules beyond the 1 : 5.4 proportion are no longer tightly bonded to lysine and therefore are free to form crystals., This work was supported by the Spanish Ministry of Science and Innovation through the project FIS2014-54734-P, MINECO (grants FIS2015-66879-C2-1-P, FIS2017-82625-P and PID2019-104650GB-C21) and by the Generalitat de Catalunya under the projects 2014-SGR-581 and 2017-SGR-042. The UK Science and Technology Facilities Council is gratefully acknowledged for partial financial support and beam time access at the ISIS Facility (RB1220294). A. Henao would like to thank the Thomas Young Centre for the Junior research fellowship supporting a stay with C. D. Lorenz. S. Cerveny thanks CSIC (LINKB20012)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effects of the Addition of Fe, Co on the azo dye degradation ability of Mn-Al mechanically alloyed powders

  • Mbarek Wael, Ben
  • Saurina Canals, Joan
  • Escoda, Lluïsa
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Khitouni, Mohamed
  • Suñol, Joan Josep
Azo compounds are used in the textile and leather industry. A significant step during the azo dyes treatment of water is the degradation by breaking the N=N bonds. This break produces the decolorization of water. In this research work, 10% atomic of Fe or Co was added to produce ternary Mn-Al-rich, nanostructured, mechanically alloyed powders in order to improve the decolorization of Reactive Black 5 solutions and to check Fe and Co addition’s influence. The microstructure was followed by X-ray diffraction, the morphology and composition by electronic microscopy and energy-dispersive X-ray spectroscopy (EDS) microanalysis. The dye degradation was monitored with ultraviolet/visible absorption spectrophotometry. After degradation, the remaining organic compound was checked by high-performance liquid chromatography (HPLC) and the functional groups of the powdered alloys by infrared spectroscopy. Fe addition to Mn-Al displayed faster kinetics and a higher efficiency than the Co addition. The Mn-Al-Fe solution (0.25 g/100 mL) was fully decolorized in 5 min. On the other side, Mn-Al-Co powders were able to successfully decolorize the dyed solution in 10 min under the same conditions. Thus, nanocrystalline Fe-doped Mn-Al alloys are good candidates for use in the decolorization process, in comparison with Co-doped and other intermetallic particles., Work funded by Spanish MINECO Grant No. FIS2017-82625-P, Catalan GenCat Grant No. 2017SGR0042 and University of Girona UNIGE-2-2019 project is also acknowledged
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Inter-enantiomer conversion dynamics and Johari–Goldstein relaxation of benzophenones

  • Romanini, Michela|||0000-0002-1685-855X
  • Macovez, Roberto|||0000-0001-5026-9372
  • Tamarit Mur, José Luis|||0000-0002-7965-0000
We employ temperature- and pressure-dependent dielectric spectroscopy, as well as differential scanning calorimetry, to characterize benzophenone and the singly-substituted ortho-bromobenzophenone derivative in the liquid and glass states, and analyze the results in terms of the molecular conformations reported for these molecules. Despite the significantly higher mass of the brominated derivative, its dynamic and calorimetric glass transition temperatures are only ten degrees higher than those of benzophenone. The kinetic fragility index of the halogenated molecule is lower than that of the parent compound, and is found to decrease with increasing pressure. By a detailed analysis of the dielectric loss spectra, we provide evidence for the existence of a Johari–Goldstein (JG) relaxation in both compounds, thus settling the controversy concerning the possible lack of a JG process in benzophenone and confirming the universality of this dielectric loss feature in molecular glass-formers. Both compounds also display an intramolecular relaxation, whose characteristic timescale appears to be correlated with that of the cooperative structural relaxation associated with the glass transition. The limited molecular flexibility of ortho-bromobenzophenone allows identifying the intramolecular relaxation as the inter-enantiomeric conversion between two isoenergetic conformers of opposite chirality, which only differ in the sign of the angle between the brominated aryl ring and the coplanar phenyl-ketone subunit. The observation by dielectric spectroscopy of a similar relaxation also in liquid benzophenone indicates that the inter-enantiomer conversion between the two isoenergetic helicoidal ground-state conformers of opposite chirality occurs via a transition state characterized by a coplanar phenyl-ketone moiety., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

X-ray photon correlation spectroscopy revealing the change of relaxation dynamics of a severely deformed Pd-based bulk metallic glass

  • Zhou, Hongbo
  • Hilke, Sven
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Peterlechner, Martin
  • Chushkin, Y.
  • Shanmugam, Sankaran
  • Wilde, Gerhard
The influence of severe plastic deformation on the relaxation dynamics of a Pd40Ni40P20 (at.%) bulk metallic glass was investigated on the atomic length scale by X-ray photon correlation spectroscopy and fluctuation electron microscopy. At a series of isothermal temperatures adjusted by step heating below the glass transition, the relaxation times were obtained by X-ray photon correlation spectroscopy and the corresponding activation energies were evaluated, E. Pineda acknowledges financial support from MINECO (grant FIS2017-82625-P) and Generalitat de Catalunya (grant 2017SGR0042), Generalitat de Catalunya (grant 2017SGR0042).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comprehensive insights into the thermal and mechanical effects of metallic glasses via creep

  • Xu, Z R
  • Qiao, J. C.
  • Wang, Jun
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Crespo Artiaga, Daniel|||0000-0003-1743-2400
Evolution of deformation and relaxation behaviors of a prototypic metallic glass was explored by extensive creep tests under both physical aging and cyclic loading. Deep insights into the microstructure-induced dynamic heterogeneity which accommodates creep deformation were successively revealed via experimental measurements and spectral analyses
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Analysis of the anelastic deformation of high-entropy Pd20Pt20Cu20Ni20P20 metallic glass under stress relaxation and recovery

  • Duan, Y.J.
  • Zhang, L.T.
  • Kato, Hidemi
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Crespo Artiaga, Daniel|||0000-0003-1743-2400
  • Pelletier, J. M.
  • Qiao, J. C.
The anelastic deformation behavior of Pd20Pt20Cu20Ni20 P20 high-entropy metallic glass was probed by monitoring the stress relaxation and recovery processes. The stress relaxation under consecutive strain steps can be described by the Kohlrausch-Williams-Watts (KWW) function. In addition, considering a hi- erarchy of relaxation processes related to the structural heterogeneity, a constitutive model is proposed in order to describe the whole process of stress relaxation and determine the contribution of different time scales. Moreover, a crossover from stochastic activation to percolation of flow defects with the ultimate strain can be observed during stress relaxation process. The anelastic recovery process after a strain step is studied as a function of the initial strain level and characterized by means of a direct spectrum analy- sis. The peaks in the recovery time-spectra revealed the evolution of flow defects in Pd20Pt20Cu20Ni20 P20 high-entropy metallic glass. The understanding of the atomic free-volume zones effect and the anelastic deformation provides important insight into how atomic structural features affect the deformation be- havior of high-entropy metallic glasses, and may provide a new avenue into the improvement of their mechanical properties., This work is supported by the NSFC (Grant No. 51971178) and the Natural Science Foundation of Shaanxi Province (Grant No. 2021JC-12). E. Pineda and D. Crespo acknowledge financial sup- port from MICINN (grant FIS2017–82625-P) and Generalitat de Catalunya (Grant 2017SGR0042). The investigation of Y. J. Duan sponsored by Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University (No. CX202031) and China Scholarship Council (CSC) under Grant 202006290092, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Dealloying of Cu-Mg-Ca alloys

  • Mbarek Wael, Ben
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Escoda, Lluïsa
  • Suñol Martinez, Juan Jose
  • Khitouni, Mohamed
The chemical dealloying of Cu-Mg-Ca alloys in free corrosion conditions was investigated for different alloy compositions and different leaching solutions. For some of the precursor alloys, a continuous, pure fcc copper with nanoporous structure can be obtained by dealloying in 0.04 M H2SO4 solution. Superficial nanoporous copper structures with extremely fine porous size were also obtained by dealloying in pure water and 0.1 M NaOH solutions. The dealloying of both amorphous and partially crystalline alloys was investigated obtaining bi-phase nanoporous/crystal composites with microstructures depending on the precursor alloy state. The fast dissolution of Mg and Ca makes the Cu-Mg-Ca system an ideal candidate for obtaining nanoporous copper structures with different properties as a function of different factors such as the alloy composition, the quenching process, and leaching conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Low-Temperature Heat Capacity Anomalies in Ordered and Disordered Phases of Normal and Deuterated Thiophene

  • Miyazaki, Yuji
  • NAKANO, Motohiro
  • Krivchikov, Alexander
  • Gebbia, Jonathan Fernando|||0000-0002-0890-3621
  • Cazorla Silva, Claudio|||0000-0002-6501-4513
  • Tamarit Mur, José Luis|||0000-0002-7965-0000
We measured the specific heat Cp of normal (C4H4S) and deuterated (C4D4S) thiophene in the temperature interval of 1 = T, K = 25. C4H4S exhibits a metastable phase II2 and a stable phase V, both with frozen orientational disorder (OD), whereas C4D4S exhibits a metastable phase II2, which is analogous to the OD phase II2 of C4H4S and a fully ordered stable phase V. Our measurements demonstrate the existence of a large bump in the heat capacity of both stable and metastable C4D4S and C4H4S phases at temperatures of ~10 K, which significantly departs from the expected Debye temperature behavior of Cp ˜ T3. This case study demonstrates that the identified low-temperature Cp anomaly, typically referred to as a “Boson-peak” in the context of glassy crystals, is not exclusive of disordered materials., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Evaluation of the Effect of Minor Additions in the Crystallization Path of [(Fe0.5Co0.5)0.75B0.2Si0.05]100-xMx Metallic Glasses by Means of Mössbauer Spectroscopy

  • Panahi, Seyedeh Leila
  • Ramasamy, Parthiban
  • Masdeu, F
  • Stoica, Mihai
  • Torrens Serra, Joan
  • Bruna Escuer, Pere|||0000-0002-7411-1278
Understanding the crystallization of metallic glasses is fundamental in the design of new alloys with enhanced properties and better glass-formability. The crystallization of a series of Fe-based metallic glasses of composition [(Fe0.5Co0.5)0.75B0.2Si0.05]100-xMx (M = Mo, Nb and Zr) has been studied by means of differential scanning calorimetry and transmission Mössbauer spectroscopy. This latter technique allows the following of the microstructural evolution of the studied alloys through the identification and quantification of the several Fe-containing crystalline phases and also through the changes in the amorphous structure at the initial stages of crystallization. The results show that the crystallization products are the same for all the studied compositions (a-Fe, Fe2B, (FeCo)23B6 and a paramagnetic remnant) although with different relative proportions and the crystallization of a phase without Fe in the alloys with Zr. Moreover, the addition of Zr favors the crystallization of a-Fe causing a detrimental effect on the glass forming ability, while the increase in Mo content up to 6 at% favors the crystallization of (FeCo)23B6. The different amount of a-Fe and borides is presented as a measure of the glass forming ability of this type of alloys, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A model study on controlling dealloying corrosion attack by lateral modification of surfactant inhibitors

  • Bertran Cànovas, Òscar|||0000-0002-3689-1429
  • Crespo Artiaga, Daniel|||0000-0003-1743-2400
  • Kokalj, Anton
  • Renner, Frank U.
  • Losada Perez, Patricia
  • Neupane, Shova
  • Rivas, Nicolás A.
  • D'Haen, Jan
  • Noei, Heshmat
  • Keller, Thomas
  • Stierle, Andreas
  • Rudolph, Michael
  • Terfort, Andreas
Detrimental corrosion is an ever-concerning challenge for metals and alloys. One possible remedy is to apply organic corrosion inhibitors. Despite progress in molecular assembly and inhibitor research, better mechanistic insight on the molecular level is needed. Here we report on the behavior of well-defined artificial molecular interfaces created by micro-contact printing of thiol-inhibitor molecules and subsequent backfilling. The obtained heterogeneity and defects trigger localized dealloying-corrosion of well-defined Cu3Au surfaces. The stability of applied inhibitor molecules depends on alloy surface morphology and on intermolecular forces of the molecular layers., Financial support by FWO Odysseus program under the G0D0115N project is appreciated. We acknowledge the support of FWO for the joint-focused ion beam (FIB) facility for nanofabrication and nanocharacterization (AKUL-15-22). We also thank for support via the M-era.Net project CoinDesc. This project has received technical support from the EU-H2020 research and innovation program under grant agreement No. 654360, Nanoscience Foundries, and Fine Analysis (NFFA). We acknowledge the use of the FIB dual-beam instrument granted by BMBF under grant no. 5K13WC3 (PT-DESY). At UPC, we acknowledge MINECO projects PCIN-2016-027 and FIS2017-82625-P
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An experimental and numerical investigation on fatigue of composite and metal aircraft structures

  • Pitta, Siddharth|||0000-0001-5247-9648
  • Rojas Gregorio, José Ignacio|||0000-0002-7025-4378
  • Roure Fernández, Francisco|||0000-0001-9521-7429
  • Crespo Artiaga, Daniel|||0000-0003-1743-2400
  • Wahab, Magd Abdel
The static strength and fatigue crack resistance of the aircraft skin structures depend on the materials used and joint type. Most of the commercial aircraft’s skin panel structures are made from aluminium alloy and carbon fibre reinforced epoxy. In this study, the fatigue resistance of four joint configurations (metal/metal, metal/composite, composite/composite and composite/metal) with riveted, adhesive bonded, and hybrid joining techniques are investigated with experiments and finite element analysis. The fatigue tests were tension-tension because of the typical nature of the loads on aircraft skin panels susceptible of experimenting fatigue. Experiment results suggest that the fatigue life of hybrid joints is superior to adhesive bonded joints, and these in turn much better than conventional riveted joints. Thanks to the fact that, for hybrid joints, the adhesive bond provides better load distribution and ensures load-carrying capacity in the event of premature adhesive failure while rivets induce compressive residual stresses in the joint. Results from FE tool ABAQUS analysis for adhesive bonded and hybrid joints agrees with the experiments. From the analysis, the energy release rate for adhesive bonded joints is higher than that of hybrid joints in both opening (mode I) and shear direction (mode II). Most joints show higher energy release rate in mode II. This indicates that the joints experience fatigue crack in the shear direction, which is responsible for crack opening., FUNDING: The authors acknowledge the support of Francesc Joaquim Garcia, lab technician of the Materials Strength Laboratory at Universitat Politècnica de Catalunya, and Dr. Randal Clark, from Mavi Innovations Inc., Canada. This work was funded and supported by the Spanish Ministry MINECO [FIS2017-82625-P], Generalitat de Catalunya AGAUR [2017 SGR 42 and 2019FI_B200097], and the Research Foundation Flanders, Belgium Ministry [FWO G018916N]. The authors wish to express their gratitude to Van Lang University, Vietnam for financial support for this research., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Inelastic deformation of metallic glasses under dynamic cyclic loading

  • Duan, Y.J.
  • Qiao, Jichao
  • Wada, T.
  • Kato, Hidemi
  • Wang, J. y.
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Crespo Artiaga, Daniel|||0000-0003-1743-2400
Dynamic mechanical analysis was performed in two metallic glasses that show markedly distinct ß relaxation features. The confined flow defects of free-volume zones and the inelastic deformation behavior result into a significant mechanical hysteresis loop in dynamic cyclic loadings, which is described with a viscoelastic model. Annealing below the glass transition temperature Tg decreases the concentration of free-volume zones, This work is supported by the NSFC (Grant No. 51971178), the Fundamental Research Funds for the Central Universities (Grant Nos. 3102019ghxm007 and 3102017JC01003), Opening fund of State Key Laboratory of Nonlinear Mechanics (LNM201911) and the Natural Science Foundation of Shaanxi Province (Grant No. 2019JM-344). E. Pineda and D. Crespo acknowledge financial support from MICINN (grant FIS2017-82625-P) and Generalitat de Catalunya (grant 2017SGR0042). The investigation of Y. J. Duan is sponsored by Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University (No. CX202031) and China Scholarship Council (CSC) for the scholarship
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Relaxation dynamics of Pd-Ni-P metallic glass: decoupling of anelastic and viscous processes

  • Soriano Araez, Daniel
  • Zhou, Hongbo
  • Hilke, Sven
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Ruta, Beatrice
  • Wilde, Gerhard
The stress relaxation dynamics of metallic glass Pd 40Ni40P20 was studied in both supercooled liquid and glassy states. Time-temperature superposition was found in the metastable liquid, implying an invariant shape of the distribution of times involved in the relaxation. Once in the glass state, the distribution of relaxation times broadens as temperature and fictive temperature decrease, eventually leading to a decoupling of the relaxation in two processes., We acknowledge the European Synchrotron Radiation Facility for provision of synchrotron radiation facilities and we would like to thank Y. Chushkin and F. Zontone for assistance in using beamline ID10. E.P. acknowledges financial support from MINECO (grant FIS2017-82625-P) and Generalitat de Catalunya (grant 2017SGR0042).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An experimental and numerical investigation on fatigue of composite and metal aircraft structures

  • Pitta, Siddharth
  • Rojas Gregorio, José Ignacio
  • Roure Fernández, Francisco
  • Crespo Artiaga, Daniel
  • Wahab, Magd Abdel
The static strength and fatigue crack resistance of the aircraft skin structures depend on the materials used and joint type. Most of the commercial aircraft’s skin panel structures are made from aluminium alloy and carbon fibre reinforced epoxy. In this study, the fatigue resistance of four joint configurations (metal/metal, metal/composite, composite/composite and composite/metal) with riveted, adhesive bonded, and hybrid joining techniques are investigated with experiments and finite element analysis. The fatigue tests were tension-tension because of the typical nature of the loads on aircraft skin panels susceptible of experimenting fatigue. Experiment results suggest that the fatigue life of hybrid joints is superior to adhesive bonded joints, and these in turn much better than conventional riveted joints. Thanks to the fact that, for hybrid joints, the adhesive bond provides better load distribution and ensures load-carrying capacity in the event of premature adhesive failure while rivets induce compressive residual stresses in the joint. Results from FE tool ABAQUS analysis for adhesive bonded and hybrid joints agrees with the experiments. From the analysis, the energy release rate for adhesive bonded joints is higher than that of hybrid joints in both opening (mode I) and shear direction (mode II). Most joints show higher energy release rate in mode II. This indicates that the joints experience fatigue crack in the shear direction, which is responsible for crack opening., FUNDING: The authors acknowledge the support of Francesc Joaquim Garcia, lab technician of the Materials Strength Laboratory at Universitat Politècnica de Catalunya, and Dr. Randal Clark, from Mavi Innovations Inc., Canada. This work was funded and supported by the Spanish Ministry MINECO [FIS2017-82625-P], Generalitat de Catalunya AGAUR [2017 SGR 42 and 2019FI_B200097], and the Research Foundation Flanders, Belgium Ministry [FWO G018916N]. The authors wish to express their gratitude to Van Lang University, Vietnam for financial support for this research., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

X-ray photon correlation spectroscopy revealing the change of relaxation dynamics of a severely deformed Pd-based bulk metallic glass

  • Zhou, Hongbo
  • Hilke, Sven
  • Pineda Soler, Eloi
  • Peterlechner, Martin
  • Chushkin, Y.
  • Shanmugam, Sankaran
  • Wilde, Gerhard
The influence of severe plastic deformation on the relaxation dynamics of a Pd40Ni40P20 (at.%) bulk metallic glass was investigated on the atomic length scale by X-ray photon correlation spectroscopy and fluctuation electron microscopy. At a series of isothermal temperatures adjusted by step heating below the glass transition, the relaxation times were obtained by X-ray photon correlation spectroscopy and the corresponding activation energies were evaluated, E. Pineda acknowledges financial support from MINECO (grant FIS2017-82625-P) and Generalitat de Catalunya (grant 2017SGR0042), Generalitat de Catalunya (grant 2017SGR0042)., Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effects of the Addition of Fe, Co on the azo dye degradation ability of Mn-Al mechanically alloyed powders

  • Mbarek Wael, Ben
  • Saurina Canals, Joan
  • Escoda, Lluïsa
  • Pineda Soler, Eloi
  • Khitouni, Mohamed
  • Suñol, Joan Josep
Azo compounds are used in the textile and leather industry. A significant step during the azo dyes treatment of water is the degradation by breaking the N=N bonds. This break produces the decolorization of water. In this research work, 10% atomic of Fe or Co was added to produce ternary Mn-Al-rich, nanostructured, mechanically alloyed powders in order to improve the decolorization of Reactive Black 5 solutions and to check Fe and Co addition’s influence. The microstructure was followed by X-ray diffraction, the morphology and composition by electronic microscopy and energy-dispersive X-ray spectroscopy (EDS) microanalysis. The dye degradation was monitored with ultraviolet/visible absorption spectrophotometry. After degradation, the remaining organic compound was checked by high-performance liquid chromatography (HPLC) and the functional groups of the powdered alloys by infrared spectroscopy. Fe addition to Mn-Al displayed faster kinetics and a higher efficiency than the Co addition. The Mn-Al-Fe solution (0.25 g/100 mL) was fully decolorized in 5 min. On the other side, Mn-Al-Co powders were able to successfully decolorize the dyed solution in 10 min under the same conditions. Thus, nanocrystalline Fe-doped Mn-Al alloys are good candidates for use in the decolorization process, in comparison with Co-doped and other intermetallic particles., Work funded by Spanish MINECO Grant No. FIS2017-82625-P, Catalan GenCat Grant No. 2017SGR0042 and University of Girona UNIGE-2-2019 project is also acknowledged, Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Low-Temperature Heat Capacity Anomalies in Ordered and Disordered Phases of Normal and Deuterated Thiophene

  • Miyazaki, Yuji
  • NAKANO, Motohiro
  • Krivchikov, Alexander
  • Gebbia, Jonathan Fernando
  • Cazorla Silva, Claudio
  • Tamarit Mur, José Luis
We measured the specific heat Cp of normal (C4H4S) and deuterated (C4D4S) thiophene in the temperature interval of 1 = T, K = 25. C4H4S exhibits a metastable phase II2 and a stable phase V, both with frozen orientational disorder (OD), whereas C4D4S exhibits a metastable phase II2, which is analogous to the OD phase II2 of C4H4S and a fully ordered stable phase V. Our measurements demonstrate the existence of a large bump in the heat capacity of both stable and metastable C4D4S and C4H4S phases at temperatures of ~10 K, which significantly departs from the expected Debye temperature behavior of Cp ˜ T3. This case study demonstrates that the identified low-temperature Cp anomaly, typically referred to as a “Boson-peak” in the context of glassy crystals, is not exclusive of disordered materials., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Relaxation dynamics of Pd-Ni-P metallic glass: decoupling of anelastic and viscous processes

  • Soriano Araez, Daniel
  • Zhou, Hongbo
  • Hilke, Sven
  • Pineda Soler, Eloi
  • Ruta, Beatrice
  • Wilde, Gerhard
The stress relaxation dynamics of metallic glass Pd 40Ni40P20 was studied in both supercooled liquid and glassy states. Time-temperature superposition was found in the metastable liquid, implying an invariant shape of the distribution of times involved in the relaxation. Once in the glass state, the distribution of relaxation times broadens as temperature and fictive temperature decrease, eventually leading to a decoupling of the relaxation in two processes., We acknowledge the European Synchrotron Radiation Facility for provision of synchrotron radiation facilities and we would like to thank Y. Chushkin and F. Zontone for assistance in using beamline ID10. E.P. acknowledges financial support from MINECO (grant FIS2017-82625-P) and Generalitat de Catalunya (grant 2017SGR0042)., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Analysis of the anelastic deformation of high-entropy Pd20Pt20Cu20Ni20P20 metallic glass under stress relaxation and recovery

  • Duan, Y.J.
  • Zhang, L.T.
  • Kato, Hidemi
  • Pineda Soler, Eloi
  • Crespo Artiaga, Daniel
  • Pelletier, J. M.
  • Qiao, J. C.
The anelastic deformation behavior of Pd20Pt20Cu20Ni20 P20 high-entropy metallic glass was probed by monitoring the stress relaxation and recovery processes. The stress relaxation under consecutive strain steps can be described by the Kohlrausch-Williams-Watts (KWW) function. In addition, considering a hi- erarchy of relaxation processes related to the structural heterogeneity, a constitutive model is proposed in order to describe the whole process of stress relaxation and determine the contribution of different time scales. Moreover, a crossover from stochastic activation to percolation of flow defects with the ultimate strain can be observed during stress relaxation process. The anelastic recovery process after a strain step is studied as a function of the initial strain level and characterized by means of a direct spectrum analy- sis. The peaks in the recovery time-spectra revealed the evolution of flow defects in Pd20Pt20Cu20Ni20 P20 high-entropy metallic glass. The understanding of the atomic free-volume zones effect and the anelastic deformation provides important insight into how atomic structural features affect the deformation be- havior of high-entropy metallic glasses, and may provide a new avenue into the improvement of their mechanical properties., This work is supported by the NSFC (Grant No. 51971178) and the Natural Science Foundation of Shaanxi Province (Grant No. 2021JC-12). E. Pineda and D. Crespo acknowledge financial sup- port from MICINN (grant FIS2017–82625-P) and Generalitat de Catalunya (Grant 2017SGR0042). The investigation of Y. J. Duan sponsored by Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University (No. CX202031) and China Scholarship Council (CSC) under Grant 202006290092, Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dealloying of Cu-Mg-Ca alloys

  • Mbarek Wael, Ben
  • Pineda Soler, Eloi
  • Escoda, Lluïsa
  • Suñol Martinez, Juan Jose
  • Khitouni, Mohamed
The chemical dealloying of Cu-Mg-Ca alloys in free corrosion conditions was investigated for different alloy compositions and different leaching solutions. For some of the precursor alloys, a continuous, pure fcc copper with nanoporous structure can be obtained by dealloying in 0.04 M H2SO4 solution. Superficial nanoporous copper structures with extremely fine porous size were also obtained by dealloying in pure water and 0.1 M NaOH solutions. The dealloying of both amorphous and partially crystalline alloys was investigated obtaining bi-phase nanoporous/crystal composites with microstructures depending on the precursor alloy state. The fast dissolution of Mg and Ca makes the Cu-Mg-Ca system an ideal candidate for obtaining nanoporous copper structures with different properties as a function of different factors such as the alloy composition, the quenching process, and leaching conditions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A model study on controlling dealloying corrosion attack by lateral modification of surfactant inhibitors

  • Bertran Cànovas, Òscar
  • Crespo Artiaga, Daniel
  • Kokalj, Anton
  • Renner, Frank U.
  • Losada Perez, Patricia
  • Neupane, Shova
  • Rivas, Nicolás A.
  • D'Haen, Jan
  • Noei, Heshmat
  • Keller, Thomas
  • Stierle, Andreas
  • Rudolph, Michael
  • Terfort, Andreas
Detrimental corrosion is an ever-concerning challenge for metals and alloys. One possible remedy is to apply organic corrosion inhibitors. Despite progress in molecular assembly and inhibitor research, better mechanistic insight on the molecular level is needed. Here we report on the behavior of well-defined artificial molecular interfaces created by micro-contact printing of thiol-inhibitor molecules and subsequent backfilling. The obtained heterogeneity and defects trigger localized dealloying-corrosion of well-defined Cu3Au surfaces. The stability of applied inhibitor molecules depends on alloy surface morphology and on intermolecular forces of the molecular layers., Financial support by FWO Odysseus program under the G0D0115N project is appreciated. We acknowledge the support of FWO for the joint-focused ion beam (FIB) facility for nanofabrication and nanocharacterization (AKUL-15-22). We also thank for support via the M-era.Net project CoinDesc. This project has received technical support from the EU-H2020 research and innovation program under grant agreement No. 654360, Nanoscience Foundries, and Fine Analysis (NFFA). We acknowledge the use of the FIB dual-beam instrument granted by BMBF under grant no. 5K13WC3 (PT-DESY). At UPC, we acknowledge MINECO projects PCIN-2016-027 and FIS2017-82625-P, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comprehensive insights into the thermal and mechanical effects of metallic glasses via creep

  • Xu, Z R
  • Qiao, J. C.
  • Wang,Jun
  • Pineda Soler, Eloi
  • Crespo Artiaga, Daniel
Evolution of deformation and relaxation behaviors of a prototypic metallic glass was explored by extensive creep tests under both physical aging and cyclic loading. Deep insights into the microstructure-induced dynamic heterogeneity which accommodates creep deformation were successively revealed via experimental measurements and spectral analyses, Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Inter-enantiomer conversion dynamics and Johari–Goldstein relaxation of benzophenones

  • Romanini, Michela
  • Macovez, Roberto
  • Tamarit Mur, José Luis
We employ temperature- and pressure-dependent dielectric spectroscopy, as well as differential scanning calorimetry, to characterize benzophenone and the singly-substituted ortho-bromobenzophenone derivative in the liquid and glass states, and analyze the results in terms of the molecular conformations reported for these molecules. Despite the significantly higher mass of the brominated derivative, its dynamic and calorimetric glass transition temperatures are only ten degrees higher than those of benzophenone. The kinetic fragility index of the halogenated molecule is lower than that of the parent compound, and is found to decrease with increasing pressure. By a detailed analysis of the dielectric loss spectra, we provide evidence for the existence of a Johari–Goldstein (JG) relaxation in both compounds, thus settling the controversy concerning the possible lack of a JG process in benzophenone and confirming the universality of this dielectric loss feature in molecular glass-formers. Both compounds also display an intramolecular relaxation, whose characteristic timescale appears to be correlated with that of the cooperative structural relaxation associated with the glass transition. The limited molecular flexibility of ortho-bromobenzophenone allows identifying the intramolecular relaxation as the inter-enantiomeric conversion between two isoenergetic conformers of opposite chirality, which only differ in the sign of the angle between the brominated aryl ring and the coplanar phenyl-ketone subunit. The observation by dielectric spectroscopy of a similar relaxation also in liquid benzophenone indicates that the inter-enantiomer conversion between the two isoenergetic helicoidal ground-state conformers of opposite chirality occurs via a transition state characterized by a coplanar phenyl-ketone moiety., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluation of the Effect of Minor Additions in the Crystallization Path of [(Fe0.5Co0.5)0.75B0.2Si0.05]100-xMx Metallic Glasses by Means of Mössbauer Spectroscopy

  • Panahi, Seyedeh Leila
  • Ramasamy, Parthiban
  • Masdeu, F
  • Stoica, Mihai
  • Torrens Serra, Joan
  • Bruna Escuer, Pere
Understanding the crystallization of metallic glasses is fundamental in the design of new alloys with enhanced properties and better glass-formability. The crystallization of a series of Fe-based metallic glasses of composition [(Fe0.5Co0.5)0.75B0.2Si0.05]100-xMx (M = Mo, Nb and Zr) has been studied by means of differential scanning calorimetry and transmission Mössbauer spectroscopy. This latter technique allows the following of the microstructural evolution of the studied alloys through the identification and quantification of the several Fe-containing crystalline phases and also through the changes in the amorphous structure at the initial stages of crystallization. The results show that the crystallization products are the same for all the studied compositions (a-Fe, Fe2B, (FeCo)23B6 and a paramagnetic remnant) although with different relative proportions and the crystallization of a phase without Fe in the alloys with Zr. Moreover, the addition of Zr favors the crystallization of a-Fe causing a detrimental effect on the glass forming ability, while the increase in Mo content up to 6 at% favors the crystallization of (FeCo)23B6. The different amount of a-Fe and borides is presented as a measure of the glass forming ability of this type of alloys, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Inelastic deformation of metallic glasses under dynamic cyclic loading

  • Duan, Y.J.
  • Qiao, Jichao
  • Wada, T.
  • Kato, Hidemi
  • Wang, J. y.
  • Pineda Soler, Eloi
  • Crespo Artiaga, Daniel
Dynamic mechanical analysis was performed in two metallic glasses that show markedly distinct ß relaxation features. The confined flow defects of free-volume zones and the inelastic deformation behavior result into a significant mechanical hysteresis loop in dynamic cyclic loadings, which is described with a viscoelastic model. Annealing below the glass transition temperature Tg decreases the concentration of free-volume zones, This work is supported by the NSFC (Grant No. 51971178), the Fundamental Research Funds for the Central Universities (Grant Nos. 3102019ghxm007 and 3102017JC01003), Opening fund of State Key Laboratory of Nonlinear Mechanics (LNM201911) and the Natural Science Foundation of Shaanxi Province (Grant No. 2019JM-344). E. Pineda and D. Crespo acknowledge financial support from MICINN (grant FIS2017-82625-P) and Generalitat de Catalunya (grant 2017SGR0042). The investigation of Y. J. Duan is sponsored by Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University (No. CX202031) and China Scholarship Council (CSC) for the scholarship, Postprint (updated version)