Skip to main content

MICROPIEZAS BASADAS EN POLIESTERAMIDAS BIODEGRADABLES CARGADAS CON BACTERIOFAGOS Y BIOMOLECULAS SUSCEPTIBLES A PROCESOS DE DESNATURALIZACION: APLICACIONES EN BIOMEDICINA

MAT2015-69547-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospray loading and release of hydrophobic gramicidin in polyester microparticles

  • Maione, Silvana
  • Valle, Luis J. del
  • Pérez-Madrigal, María M.
  • Cativiela, Carlos
  • Puiggalí, Jordi
  • Alemán, Carlos
Gramicidin (GA), a very hydrophobic pentadecapeptide with important biological activities (i.e. in addition to its well-known antimicrobial and antibiotic activities, GA has been recently identified as a potent therapeutic agent against different carcinomas), has been loaded by electrospraying in poly(tetramethylene succinate) (PE44), a biodegradable and biocompatible aliphatic polyester. Microspheres (average diameter: 5.0 ± 0.7 μm) were successfully obtained from the mixture of GA and PE44 solutions in ethanol and chloroform, respectively. The loading of the peptide, which has been proved by FTIR and X-ray photoelectron spectroscopies, essentially occurred at the surface of the microspheres, as was reflected by scanning electron microscopy micrographs and atomic force microscopy phase images. In spite of this, the thermal stability of the polyester matrix remained essentially unaltered, even though the wettability decreased. The release of GA in phosphate buffer saline (PBS) was limited by the very low solubility of the peptide in aqueous solution, a fast burst effect followed by the establishment of equilibrium after 5 days of being observed in this hydrophilic environment. The release behaviour was very different when the hydrophilicity of the medium was reduced by adding ethanol. In this case, a very fast but sustained release was identified during the first few hours. On the other hand, biological tests have demonstrated that GA retains its antimicrobial activity after loading and does not alter the biocompatibility of PE44. Our results prove that, despite its hydrophobicity and relatively large number of residues, the loading of GA in a polymeric matrix represents an alternative strategy for the release of this versatile peptide in cancer therapy., Authors thank supports from MINECO and FEDER (MAT2015-69367-R, MAT2015-69547-R and CTQ2013-40855-R) and Gobierno de Aragón – Fondo Social Europeo (research group E40). Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biodegradable nanofibrous scaffolds as smart delivery vehicles for amino acids

  • Maione, Silvana
  • Pérez-Madrigal, María M.
  • Valle, Luis J. del
  • Díaz, Angélica
  • Franco, Lourdes
  • Cativiela, Carlos
  • Puiggalí, Jordi
  • Alemán, Carlos
The encapsulation of amino acids (AAs) and their correct preservation before they are ingested are challenging tasks. Nonpolar (l-alanine and l-phenylalanine), polar (l-cysteine hydrochloride and l-asparagine), and charged (l-lysine hydrochloride and l-aspartic acid) AAs were loaded into biodegradable and nontoxic poly(tetramethylene succinate) (PE44) nanofibers (NFs) with electrospinning. The loading of AAs considerably affected the morphology, topography, thermal properties, and wettability of the PE44 NFs. Furthermore, although the AAs crystallized in a phase separated from the polymeric matrix, the distribution of such crystals changed into PE44 NFs and depended on their chemical nature. Release assays in enzyme-free solutions provided evidence that very significant amounts of AAs were retained in the NFs after 7 days, whereas assays in the lipase-containing solution (because lipase performs essential roles in the digestion) showed almost complete release after a few hours. Lipase preferentially attacked the PE44 regions responsible for the retention of AAs in the biphasic system and favored the almost immediate release of the biomolecules. The results displayed in this study, combined with the biocompatibility, biodegradability, and potential use of the PE44 NFs as edible nonnutritional elements, suggest that the loaded PE44–AA NFs could be used to supply essential and conditional AAs., The authors acknowledge Ministerio de Economía, Industria y Competitividad / Fondo Europeo de Desarrollo Regional (MINECO/FEDER) (contract grant numbers MAT2015-69367-R, MAT2015-69547-R, and CTQ2013-40855-R) and Gobierno de Aragón–Fondo Social Europeo (Research Group E40) for their financial support. One of the authors (C.A.) is grateful to the Institució Catalana de Recerca i Estudis Avançats (ICREA) Academia program for its support of the research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diversity and hierarchy in supramolecular assemblies of triphenylalanine: From laminated helical ribbons to toroids

  • Mayans, Enric
  • Casanovas, Jordi
  • Gil, Ana M.
  • Jiménez, Ana I.
  • Cativiela, Carlos
  • Puiggalí, Jordi
  • Alemán, Carlos
Microstructures from small phenylalanine-based peptides have attracted great attention lately because these compounds are considered to be a new class of tunable materials. In spite of the extensive studies on uncapped diphenylalanine and tetraphenylalanine peptides, studies on the self-assembly of uncapped triphenylananine (FFF) are very scarce and nonsystematic. In this work, we demonstrate that FFF assemblies can organize in a wide number of well-defined supramolecular structures, which include laminated helical-ribbons, leaflike dendrimers, doughnut-, needle-, and flower-shapes. These organizations are produced by the attractive or repulsive interactions between already formed assemblies and therefore can be controlled through the choice of solvents used as the incubation medium. Thus, the formation of the desired supramolecular structures is regulated through the protonation/deprotonation of the terminal groups, the polarity of the incubation medium, which affects both peptide···solvent interactions and the cavity solvation energy (i.e., solvent···solvent interactions), and the steric interactions between own assemblies that act as building blocks. Finally, the β-sheet disposition in the latter structural motifs has been examined using both theoretical calculations and Fourier transform infrared spectroscopy. Results indicate that FFF molecules can adopt both parallel and antiparallel β-sheets. However, the former one is the most energetically favored because of the formation of π-π stacking interactions between the aromatic rings of hydrogen-bonded strands., The authors thank MINECO and FEDER (MAT2015-69367-R, MAT2015-69547-R, and CTQ2013-40855-R) and Gobierno de Aragon-FEDER (research group E40). Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface mediated hierarchical assemblies of highly hydrophobic phenylalanine-based peptides

  • Mayans, Enric
  • Fabregat, Georgina
  • Juárez, Ruben
  • Cativiela, Carlos
  • Puiggalí, Jordi
  • Alemán, Carlos
We report the noticeable control exerted by the surface in the self‐assembly of a highly hydrophobic triphenylalanine peptide with fluorenyl functionalities blocking the two ends. The remarkable differences observed among the polymorphic hierarchical assemblies obtained onto silanized glass, scratched glass, stainless steel, exfoliated mica, silicon wafer, carbon, polytetrafluoroethylene, plasma‐functionalized, polystyrene and nitrocellulose substrates are consequence of the balance between peptide⋅⋅⋅peptide and peptide⋅⋅⋅surface interactions. This balance is greatly influenced by the surface characteristics, as defined by the wettability (hydrophobicity or hydrophilicity) and roughness (degree of flatness and regularity). Furthermore, very stable dendritic structures, in which primary frameworks nucleated from the center grow according to a 4‐fold pseudo‐symmetry branching, have been obtained onto hydrophilic treated polystyrene., Authors thank supports from MINECO and FEDER (MAT2015-69367-R, MAT2015-69547-R and CTQ2013-40855-R) and Gobierno de Aragon - Fondo Social Europeo (research group E40). Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembly of diphenylalanine with preclick components as capping groups

  • Gemma, Andrea
  • Mayans, Enric
  • Ballano, Gema
  • Torras, Juan
  • Díaz, Angélica
  • Jiménez, Ana I.
  • Puiggalí, Jordi
  • Cativiela, Carlos
  • Alemán, Carlos
Alkyne and azide, which are commonly used in the cycloaddition reaction recognized as "click chemistry", have been used as capping groups of two engineered diphenylalanine (FF) derivatives due to their ability to form weak intermolecular interactions (i.e. dipole-π and π-π stacking). In Poc-FF-N3, alkyne and azide act as N- and C-terminal capping groups, respectively, while such positions are exchanged in N3-FF-OPrp. The self-assembly of such two synthesized peptides has been extensively studied in their "pre-click" state, considering the influence of three different factors: the peptide concentration, the polarity of the medium, and the nature of the substrate. Poc-FF-N3 assembles into microfibers that, depending on the medium and the substrate, can aggregate hierarchically in supramolecular structures with different morphologies. The most distinctive one corresponds to very stable birefringent dendritic-like microstructures, which are derived from the ordered agglomeration of microfibers. These branched supramolecular structures, which are observed under a variety of conditions, are relatively uncommon in short FF sequences. At the molecular level, Poc-FF-N3 organizes in antiparallel β-sheets stabilized by N-HO intermolecular hydrogen bonds and re-enforced by weak interactions between the azide and alkyne groups of neighbouring molecules. In contrast, N3-FF-OPrp exhibits a very poor tendency to organize into structures with a well-defined morphology. Theoretical calculations on model complexes indicate that the tendency of the latter peptide to organize into small amorphous agglomerates is due to its poor ability to form specific intermolecular interactions in comparison with Poc-FF-N3. The implications of the weak interactions induced by the alkyne and azide groups, which strengthen peptidepeptide hydrogen bonds and π-ladders due to the stacked aromatic phenyl side groups, are discussed., Authors are thankful for the support from MINECO and FEDER (MAT2015-69367-R, MAT2015-69547-R and CTQ2013-40855-R) and Gobierno de Aragon – FEDER (research group E40). Support for the research of C. A. was received through the prize ‘‘ICREA Academia’’ for excellence in research funded by the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of solvent choice on the self-assembly properties of a diphenylalanine amphiphile stabilized by an ion pair

  • Mayans, Enric
  • Ballano, Gema
  • Sendros, Javier
  • Font-Bardía, Mercè
  • Campos, J. Lourdes
  • Puiggalí, Jordi
  • Cativiela, Carlos
  • Alemán, Carlos
A diphenylalanine (FF) amphiphile blocked at the C terminus with a benzyl ester (OBzl) and stabilized at the N terminus with a trifluoroacetate (TFA) anion was synthetized and characterized. Aggregation of peptide molecules was studied by considering a peptide solution in an organic solvent and adding pure water, a KCl solution, or another organic solvent as co-solvent. The choice of the organic solvent and co-solvent and the solvent/co-solvent ratio allowed the mixture to be tuned by modulating the polarity, the ionic strength, and the peptide concentration. Differences in the properties of the media used to dissolve the peptides resulted in the formation of different self-assembled microstructures (e.g. fibers, branched-like structures, plates, and spherulites). Furthermore, crystals of TFA⋅FF-OBzl were obtained from the aqueous peptide solutions for X-ray diffraction analysis. The results revealed a hydrophilic core constituted by carboxylate (from TFA), ester, and amide groups, and the core was found to be surrounded by a hydrophobic crown with ten aromatic rings. This segregated organization explains the assemblies observed in the different solvent mixtures as a function of the environmental polarity, ionic strength, and peptide concentration., The authors are thankful for support from MINECO and FEDER (MAT2015‐69367‐R, MAT2015‐69547‐R and CTQ2013‐40855‐R) and Gobierno de Aragón—Fondo Social Europeo (research group E40). Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antimicrobial electrospun fibers of polyester loaded with engineered cyclic gramicidin analogues

  • Maione, Silvana
  • Valle, Luis J. del
  • Pérez-Madrigal, María M.
  • Cativiela, Carlos
  • Puiggalí, Jordi
  • Alemán, Carlos
Biodegradable polyester fibers have been loaded with two engineered analogues of gramicidin soviet. In these cyclic peptide derivatives, which were designed in a previous work to stabilize the bioactive conformation while enhancing the antimicrobial activity, the D-Phe was replaced by D-Pro, and the L-Pro was changed by 1-aminocyclopropanecarboxylic acid (Ac3c) or by an Ac3c derivative with two vicinal phenyl substituents in a trans relative disposition (S,S-c3diPhe). The diameter, topography, thermal stability and wettability of the polyester fibers, which have been obtained by electrospinning, strongly depend on the molecular constraints and stability of the loaded peptides. More specifically, unloaded and linear gramicidin-loaded fibers (used as control) are hydrophobic, rough and micrometric, while fibers loaded with the cyclic peptides are hydrophilic, ultra-smooth, nanometric and less thermally stable. The activity of the two cyclic peptides increases when loaded into polyester fibers, suggesting that the polymeric matrix stabilizes the bioactive β-sheet structure. The peptide with S,S-c3diPhe displays higher antibiotic potency and biocompatibility than that with Ac3c, which indicates not only that the bioactive conformation is better preserved by the former but also the significant role played by the phenyl rings in the recognition by living cells., The authors thank support from Ministerio de Economía y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (FEDER) (MAT2015-69367-R, MAT2015-69547-R and CTQ2013-40855-R) and Gobierno de Aragón—FEDER (research group E40). Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Amyloid-like fibrils from a diphenylalanine capped with an aromatic fluorenyl

  • Martí, Didac
  • Mayans, Enric
  • Gil, Ana M.
  • Díaz, Angélica
  • Jiménez, Ana I.
  • Yousef, Ibraheem
  • Keridou, Ina
  • Cativiela, Carlos
  • Puiggalí, Jordi
  • Alemán, Carlos
The self-assembly behavior of a diphenylalanine amphiphile blocked at the C-terminus with a 9-fluorenylmethyl ester and stabilized at the N-terminus with a trifluoroacetate (TFA) anion, TFA·FF-OFm, has been examined. At low peptide concentration (0.5 mg/mL), long amyloid-like fibrils, which come from the fusion of two or more helical ribbons and/or thinner fibrils, organized in bundles or as individual entities are detected. Microbeam synchrotron radiation infrared spectroscopy has shown that TFA·FF-OFm molecules in amyloid-like fibrils arrange, forming antiparallel β-sheets. Alteration of the experimental conditions to prioritize the thermodynamic contribution with respect to the kinetic one in the self-assembly process inhibits the organization of amyloid-like structures in favor of the formation of conventional fibrous structures. On the basis of experimental observations, a structural model where the individual antiparallel β-sheets are oriented in parallel has been proposed for TFA·FF-OFm amyloid-like fibrils., The authors acknowledge MINECO/FEDER (MAT2015-69367-R, MAT2015-69547-R, and CTQ2013-40855-R), Agencia de Gestiód’Ajuts Universitaris i de Recerca (2017SGR359) and Gobierno de Aragon - FEDER (research group Aminoacidos y Peptidos E19_17R) for financial support. Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid polypeptide/polylactide copolymers with short phenylalanine blocks

  • Mayans, Enric
  • Murase, Sara K.
  • Pérez-Madrigal, María M.
  • Cativiela, Carlos
  • Alemán, Carlos
  • Puiggalí, Jordi
Hybrid copolymers constituted by short l-phenylalanine (Phe) blocks (i.e., Phen with n ranging from 2 to 25) and l-lactide blocks of different length are synthesized and characterized. The diblock structure is obtained by ring opening polymerization of lactide using a Phe-oligopeptide as macroinitiator. The length of the poly(l-lactide) (PLLA) block is controlled through the [lactide]/[macroinitiator] ratio. Morphologic studies of such hybrid copolymers indicate that the assembly of PLLA can be controlled by introducing short Phe blocks. Spherulites with both positive and negative birefringence are achieved in melt crystallization as a consequence of different lamellar distributions. Instead, a high variety of structures are detected in solution-crystallized samples. Specifically, lozenge single crystals, flower-like crystals, fibrillar structures, compact spheres, ringed sperulites, dendritic structures, microfibers, and braid-like microstructures are observed. Some of the detected morphologies are characteristic of self-assembled Phe-oligopeptides, suggesting that Phe-blocks play a crucial role in the self-assembly properties., The authors thank MINECO and FEDER (MAT2015-69367-R, MAT2015-69547-R, and CTQ2013-40855-R), the Generalitat de Catalunya (2014SGR188) and Gobierno de Aragoń-FEDER (research group E40). Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning molecular dynamics by hydration and confinement: Antiplasticizing effect of water in hydrated prilocaine nanoclusters

  • Ruiz, Guadalupe N.
  • Combarro-Palacios, Izaskun
  • McLain, Sylvia E.
  • Schwartz, Gustavo A.
  • Pardo, Luis Carlos
  • Cerveny, Silvina
  • Macovez, Roberto
In glass-forming substances, the addition of water tends to produce the effect of lowering the glass transition temperature, T. In a previous work by some of us (Ruiz et al., Sci. Rep., 2017, 7, 7470) we reported on a rare anti-plasticizing effect of water on the molecular dynamics of a simple molecular system, the pharmaceutically active prilocaine molecule, for which the addition of water leads to an increase of T. In the present work, we study pure and hydrated prilocaine confined in 0.5 nm and 1 nm pore size molecular sieves, and carry out a comparison with the bulk compounds in order to gain a better understanding of the microscopic mechanisms that result in this rare effect. We find that the T of the drug under nanometric confinement can be lower than the bulk value by as much as 17 K. Through the concurrent use of differential scanning calorimetry and broadband dielectric spectroscopy we are able to observe the antiplasticizing effect of water in prilocaine also under nanometric confinement, finding an increase of T of up to almost 6 K upon hydration. The extension of our analysis to nanoconfined systems provides a plausible explanation for the very uncommon antiplasticizing effect, based on the formation of water-prilocaine molecular complexes. Moreover, this study deepens the understanding of the behavior of drugs under confinement, which is of relevance not only from a fundamental point of view, but also for practical applications such as drug delivery., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness MINECO through project FIS2017-82625-P and through the project MAT2015-69547-R, and by the Generalitat de Catalunya under project 2017SGR-42. We also thanks Elkartek program (nG17, KK-2017/00012) and the Bask Government under project IT-1175-19
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Influence of the atmosphere conditions in the structure, properties and solubility of fluorine-substituted hydroxyapatites

  • Rivas Cañas, Manuel|||0000-0002-8884-3410
  • Valle Mendoza, Luis Javier del|||0000-0001-9916-1741
  • Turón Dols, Pau
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
The influence of synthetic conditions in the composition and properties of chemically precipitated hydroxyapatite (HAp), fluorine-substituted HAp (xF-HAp) and fluorapatite (FAp) havebeen examined consideringdifferent atmospheres (nitrogen, air and carbon dioxide),temperatures (37 ºC and 150 ºC) and pressures (hydrothermal conditions). Results indicate that the synthetic conditionsnot only affect the fluorinationdegreebut also have a pronouncedeffectonthe carbonationdegree,thecrystallinity,the surface wettability and the thermal stability. Besides, theelectrical polarization of HAp-basedmineralsmainlydepends on the fluoride content, the formation of ordered channels ofvacancies along the sintering and thermal polarization processesbecoming more difficult with increasing fluorination degree.This limits the utilization of xF-HAp and FApas electro-responsive scaffoldsandelectrocatalysts, as has been recently proposed for polarized HAp.Finally, the effects of the carbonation and the fluoridation degrees, the concentration fluoride anions supplied from an external source, and the pHon thesolubilityof HAp-based mineralshave been examined. Observationsindicate that,although strategies based on the substitution of HAp by xF-HAp or FAp have been proposed for coatings of dental implants, external fluoride anions inhibit the solubility more effectively than the fluorination of theownmineral matrix.Accordingly, HAp combined with an effective external supply of fluoride anions ismore appropriated than xF-HAp and FAp for the fabrication of dental coatings., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Poly-y-glutamic Acid Hydrogels as Electrolyte for Poly(3,4-ethylenedioxythiophene)-Based Supercapacitors

  • Pérez Madrigal, Mª del Mar
  • Edo, Miquel G.
  • Díaz Andrade, Angélica María
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
Biosynthetic poly-¿-glutamic acid (¿-PGA) has been used to produce hydrogels using cystamine as cross-linker and 1-[3-(dimethylamino)propyl]-3-ethylcarbodiimide methiodide (EDC methiodide) as condensing agent. Eight different hydrogels with different properties were formulated by varying both the molecular weight of ¿-PGA and the ¿-PGA/EDC/cystamine ratio and subsequently characterized. The most appropriate ¿-PGA hydrogel was selected to perform as solid electrolytic medium in organic electrochemical supercapacitors (OESCs) using poly(3,4-ethylenedioxythiophene) (PEDOT) electrodes based on their mechanical behavior (consistency and robustness to hold the PEDOT electrodes), morphology, and influence on the electrochemical response of the organic electrode (i.e., specific capacitance and both maximum energy and power density values). Hence, PEDOT/¿-PGA energy storage devices fabricated using the most adequate hydrogel formulation displayed a supercapacitor response of 168 F/g and a capacitance retention of 81%. Moreover, after evaluating the maximum energy and power densities (Ragone plot), cyclability, long-term stability, leakage current, and self-discharging response of PEDOT/¿-PGA OESC devices, results allow us to highlight the merits and great potential of ¿-PGA hydrogels as sustainable ion-conductive electrolytes for environmentally friendly energy storage technologies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Loading of antibiotic into biocoated hydroxyapatite nanoparticles: smart antitumor platforms with regulated release

  • Rivas Cañas, Manuel|||0000-0002-8884-3410
  • Valle Mendoza, Luis Javier del|||0000-0001-9916-1741
  • Rodríguez Rivero, Anna M.
  • Turon, Pau
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
In this research we propose a nanoplatform for anticancer therapy that is based on the combination of three components: (1) an antibiotic to target selectively the mitochondria of cancer cells, inhibiting their functions; (2) mineral nanoparticles (NPs) able to encapsulate the antibiotic and to enter into the cells across the cell membrane; and (3) a biocoating to protect the antibiotic during and/or after its regulated release, increasing its therapeutic efficacy. Chloramphenicol (CAM), a prototypical wide-spectrum antibiotic, has been used to induce mitochondrial-dysfunctions in cancer cells. Different in situ synthetic strategies have been tested to load such antibiotic into both crystalline hydroxyapatite (cHAp) and amorphous calcium phosphate (ACP) NPs. cHAp NPs showed higher loading capacity, in terms of encapsulation and superficial adsorption of CAM, and slower antibiotic release than ACP NPs. On the other hand, the protecting role played by biocoatings based on pyrophosphate and, especially, triphosphate was greater than that of biophosphonates, the anticancer therapeutic efficacy of CAM being maximized by the former. In vitro studies using healthy and cancer cell lines have demonstrated that in situ CAM-loaded cHAp NPs coated with triphosphate selectively kill a great population of cancer cells, evidencing the potential of this nanoplatform in cancer treatment., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Biodegradable nanofibrous scaffolds as smart delivery vehicles for amino acids

  • Maione, Silvana
  • Pérez Madrigal, Maria del Mar|||0000-0002-2498-8485
  • Valle Mendoza, Luis Javier del|||0000-0001-9916-1741
  • Díaz Andrade, Angélica María
  • Catiavela, Carlos
  • Franco García, María Lourdes|||0000-0001-5968-285X
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
The encapsulation of amino acids (AAs) and their correct preservation before they are ingested are challenging tasks. Nonpolar (l-alanine and l-phenylalanine), polar (l-cysteine hydrochloride and l-asparagine), and charged (l-lysine hydrochloride and l-aspartic acid) AAs were loaded into biodegradable and nontoxic poly(tetramethylene succinate) (PE44) nanofibers (NFs) with electrospinning. The loading of AAs considerably affected the morphology, topography, thermal properties, and wettability of the PE44 NFs. Furthermore, although the AAs crystallized in a phase separated from the polymeric matrix, the distribution of such crystals changed into PE44 NFs and depended on their chemical nature. Release assays in enzyme-free solutions provided evidence that very significant amounts of AAs were retained in the NFs after 7 days, whereas assays in the lipase-containing solution (because lipase performs essential roles in the digestion) showed almost complete release after a few hours. Lipase preferentially attacked the PE44 regions responsible for the retention of AAs in the biphasic system and favored the almost immediate release of the biomolecules. The results displayed in this study, combined with the biocompatibility, biodegradability, and potential use of the PE44 NFs as edible nonnutritional elements, suggest that the loaded PE44–AA NFs could be used to supply essential and conditional AAs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Isomeric cationic ionenes as n-dopant agents of poly(3,4-ethylenedioxythiophene) for in situ gelation

  • Saborío González, Maricruz|||0000-0001-8103-2466
  • Bertran Cànovas, Òscar|||0000-0002-3689-1429
  • Lanzalaco, Sonia|||0000-0002-8604-5095
  • Häring, Marleen
  • Franco García, María Lourdes|||0000-0001-5968-285X
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
  • Díaz Díaz, David
  • Estrany Coda, Francesc|||0000-0002-2696-1489
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
Three isomeric ionene polymers containing 1,4-diazabicyclo[2.2.2]octane (DABCO) and N,N’-(x-phenylene)dibenzamide (x= ortho- / meta- / para-) linkages have been used as dopant agents to produce n-doped poly(3,4-ethylenedioxythiophene) (PEDOT) electrodes by reducing already dedoped conducting polymer (CP) films. This work focuses on the influence of the ionene topology in both the properties of n-doped PEDOT:ionene electrodes and the success of the in situ thermal gelation of the ionene inside the CP matrix. The highest doping level is reached for the para-isomeric ionene-containing electrode, even though the content of ortho- and meta-topomers into the corresponding n-doped PEDOT:ionene electrodes is greater. Thus, many of the incorporated ionene units are not directly interacting with CP chains and, therefore, do not play an active role as n-dopant agent but they are crucial for the in situ formation of ionene hydrogels. The effect of the ionene topology is practically inexistent in properties like the specific capacitance and wettability of PEDOT:ionene films, and it is small but non-negligible in the electrochemical and thermal stability. In contrast, the surface morphology, topography, and distribution of dopant molecules significantly depend on the ionene topology. In situ thermal gelation was successful in PEDOT films n-doped with the ortho- and para-topomers, even though this assembly process was much faster for the former than for the latter. The gelation considerably improved the mechanical response of electropolymerized PEDOT film, which was practically non-existent before it. Molecular dynamics simulations prove that the strength and abundance of PEDOT···ionene specific interactions (i.e. ¿-¿ stacking, N–H···S hydrogen bonds and both N+···O and N+···S interactions) are higher for the meta-isomeric ionene, for which the in situ gelation was not achieved, than for the ortho- and para-ones., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Flexible Electrodes for Supercapacitors Based on the Supramolecular Assembly of Biohydrogel and Conducting Polymer

  • Saborío González, Maricruz|||0000-0001-8103-2466
  • Lanzalaco, Sonia|||0000-0002-8604-5095
  • Fabregat Jové, Georgina|||0000-0001-8967-9950
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
  • Estrany Coda, Francesc|||0000-0002-2696-1489
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
Flexible and lightweight electrodes were prepared using a two-step process. First, poly(3,4-ethylenedioxythiophene) (PEDOT) microparticles were loaded into poly-y-glutamic acid (y-PGA) hydrogel matrix during the reaction of the biopolymer chains with the cross-linker, cystamine. After this, PEDOT particles dispersed inside the hydrogel were used as polymerization nuclei for the chronoamperometric synthesis of poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PHMeDOT) in aqueous solution. After characterization of the resulting electrode composites, electrochemical studies revealed that the capacitive properties drastically depend on the polymerization time used to produce PHMeDOT inside the loaded hydrogel matrix. Specifically, flexible electrodes obtained using a polymerization time of 7 h exhibit an specific capacitance of 45.4 ± 0.7 mF/cm2 from cyclic voltammetry and charge–discharge long-term stability. The applicability of these electrodes in lightweight and flexible energy-harvesting systems useful for energy-autonomous, low-power, disposable electronic devices has been proved powering a LED bulb., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybrid polypeptide/polylactide copolymers with short phenylalanine blocks

  • Mayans Tayadella, Enric|||0000-0002-1668-0990
  • Murase Fernández, Sara Keiko|||0000-0002-9251-0205
  • Pérez Madrigal, Maria del Mar|||0000-0002-2498-8485
  • Cativiela, Carlos
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
This is the peer reviewed version of the following article: Mayans, E., et al. Hybrid polypeptide/polylactide copolymers with short phenylalanine blocks. "Macromolecular chemistry and physics", 29 Juliol 2018, vol. 219, núm. 17, p. 1800168-1-1800168-11, which has been published in final form at https://doi.org/10.1002/macp.201800168. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., Hybrid copolymers constituted by short l-phenylalanine (Phe) blocks (i.e., Phen with n ranging from 2 to 25) and l-lactide blocks of different length are synthesized and characterized. The diblock structure is obtained by ring opening polymerization of lactide using a Phe-oligopeptide as macroinitiator. The length of the poly(l-lactide) (PLLA) block is controlled through the [lactide]/[macroinitiator] ratio. Morphologic studies of such hybrid copolymers indicate that the assembly of PLLA can be controlled by introducing short Phe blocks. Spherulites with both positive and negative birefringence are achieved in melt crystallization as a consequence of different lamellar distributions. Instead, a high variety of structures are detected in solution-crystallized samples. Specifically, lozenge single crystals, flower-like crystals, fibrillar structures, compact spheres, ringed sperulites, dendritic structures, microfibers, and braid-like microstructures are observed. Some of the detected morphologies are characteristic of self-assembled Phe-oligopeptides, suggesting that Phe-blocks play a crucial role in the self-assembly properties., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of Solvent Choice on the Self-Assembly Properties of a Diphenylalanine Amphiphile Stabilized by an Ion Pair

  • Mayans, E.
  • Ballano, G.
  • Sendros, J.
  • Font-Bardia, M.
  • Campos, J.L.
  • Puiggalí, J.
  • Cativiela, C.
  • Alemán, C.
A diphenylalanine (FF) amphiphile blocked at the C terminus with a benzyl ester (OBzl) and stabilized at the N terminus with a trifluoroacetate (TFA) anion was synthetized and characterized. Aggregation of peptide molecules was studied by considering a peptide solution in an organic solvent and adding pure water, a KCl solution, or another organic solvent as co-solvent. The choice of the organic solvent and co-solvent and the solvent/co-solvent ratio allowed the mixture to be tuned by modulating the polarity, the ionic strength, and the peptide concentration. Differences in the properties of the media used to dissolve the peptides resulted in the formation of different self-assembled microstructures (e.g. fibers, branched-like structures, plates, and spherulites). Furthermore, crystals of TFAFF-OBzl were obtained from the aqueous peptide solutions for X-ray diffraction analysis. The results revealed a hydrophilic core constituted by carboxylate (from TFA), ester, and amide groups, and the core was found to be surrounded by a hydrophobic crown with ten aromatic rings. This segregated organization explains the assemblies observed in the different solvent mixtures as a function of the environmental polarity, ionic strength, and peptide concentration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Antimicrobial electrospun fibers of polyester loaded with engineered cyclic gramicidin analogues

  • Maione, S.
  • del Valle, L.J.
  • Pérez-Madrigal, M.M.
  • Cativiela, C.
  • Puiggalí, J.
  • Alemán, C.
Biodegradable polyester fibers have been loaded with two engineered analogues of gramicidin soviet. In these cyclic peptide derivatives, which were designed in a previous work to stabilize the bioactive conformation while enhancing the antimicrobial activity, the D-Phe was replaced by D-Pro, and the L-Pro was changed by 1-aminocyclopropanecarboxylic acid (Ac3c) or by an Ac3c derivative with two vicinal phenyl substituents in a trans relative disposition (S, S-c3diPhe). The diameter, topography, thermal stability and wettability of the polyester fibers, which have been obtained by electrospinning, strongly depend on the molecular constraints and stability of the loaded peptides. More specifically, unloaded and linear gramicidin-loaded fibers (used as control) are hydrophobic, rough and micrometric, while fibers loaded with the cyclic peptides are hydrophilic, ultra-smooth, nanometric and less thermally stable. The activity of the two cyclic peptides increases when loaded into polyester fibers, suggesting that the polymeric matrix stabilizes the bioactive ß-sheet structure. The peptide with S, S-c3diPhe displays higher antibiotic potency and biocompatibility than that with Ac3c, which indicates not only that the bioactive conformation is better preserved by the former but also the significant role played by the phenyl rings in the recognition by living cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrospray loading and release of hydrophobic gramicidin in polyester microparticles

  • Maione, S.
  • del Valle, L.J.
  • Perez-Madrigal, M.M.
  • Cativiela, C.
  • Puiggali, J.
  • Aleman, C.
Gramicidin (GA), a very hydrophobic pentadecapeptide with important biological activities (i.e. in addition to its well-known antimicrobial and antibiotic activities, GA has been recently identified as a potent therapeutic agent against different carcinomas), has been loaded by electrospraying in poly(tetramethylene succinate) (PE44), a biodegradable and biocompatible aliphatic polyester. Microspheres (average diameter: 5.0 +/- 0.7 mm) were successfully obtained from the mixture of GA and PE44 solutions in ethanol and chloroform, respectively. The loading of the peptide, which has been proved by FTIR and X-ray photoelectron spectroscopies, essentially occurred at the surface of the microspheres, as was reflected by scanning electron microscopy micrographs and atomic force microscopy phase images. In spite of this, the thermal stability of the polyester matrix remained essentially unaltered, even though the wettability decreased. The release of GA in phosphate buffer saline (PBS) was limited by the very low solubility of the peptide in aqueous solution, a fast burst effect followed by the establishment of equilibrium after 5 days of being observed in this hydrophilic environment. The release behaviour was very different when the hydrophilicity of the medium was reduced by adding ethanol. In this case, a very fast but sustained release was identified during the first few hours. On the other hand, biological tests have demonstrated that GA retains its antimicrobial activity after loading and does not alter the biocompatibility of PE44. Our results prove that, despite its hydrophobicity and relatively large number of residues, the loading of GA in a polymeric matrix represents an alternative strategy for the release of this versatile peptide in cancer therapy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Amyloid-like Fibrils from a Diphenylalanine Capped with an Aromatic Fluorenyl

  • Martí, D.
  • Mayans, E.
  • Gil, A.M.
  • Díaz, A.
  • Jiménez, A.I.
  • Yousef, I.
  • Keridou, I.
  • Cativiela, C.
  • Puiggalí, J.
  • Alemán, C.
The self-assembly behavior of a diphenylalanine amphiphile blocked at the C-terminus with a 9-fluorenylmethyl ester and stabilized at the N-terminus with a trifluoroacetate (TFA) anion, TFA·FF-OFm, has been examined. At low peptide concentration (0.5 mg/mL), long amyloid-like fibrils, which come from the fusion of two or more helical ribbons and/or thinner fibrils, organized in bundles or as individual entities are detected. Microbeam synchrotron radiation infrared spectroscopy has shown that TFA·FF-OFm molecules in amyloid-like fibrils arrange, forming antiparallel ß-sheets. Alteration of the experimental conditions to prioritize the thermodynamic contribution with respect to the kinetic one in the self-assembly process inhibits the organization of amyloid-like structures in favor of the formation of conventional fibrous structures. On the basis of experimental observations, a structural model where the individual antiparallel ß-sheets are oriented in parallel has been proposed for TFA·FF-OFm amyloid-like fibrils.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Flexible Electrodes for Supercapacitors Based on the Supramolecular Assembly of Biohydrogel and Conducting Polymer

  • Saborío González, Maricruz
  • Lanzalaco, Sonia
  • Fabregat Jové, Georgina
  • Puiggalí Bellalta, Jordi
  • Estrany Coda, Francesc
  • Alemán Llansó, Carlos
Flexible and lightweight electrodes were prepared using a two-step process. First, poly(3,4-ethylenedioxythiophene) (PEDOT) microparticles were loaded into poly-y-glutamic acid (y-PGA) hydrogel matrix during the reaction of the biopolymer chains with the cross-linker, cystamine. After this, PEDOT particles dispersed inside the hydrogel were used as polymerization nuclei for the chronoamperometric synthesis of poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PHMeDOT) in aqueous solution. After characterization of the resulting electrode composites, electrochemical studies revealed that the capacitive properties drastically depend on the polymerization time used to produce PHMeDOT inside the loaded hydrogel matrix. Specifically, flexible electrodes obtained using a polymerization time of 7 h exhibit an specific capacitance of 45.4 ± 0.7 mF/cm2 from cyclic voltammetry and charge–discharge long-term stability. The applicability of these electrodes in lightweight and flexible energy-harvesting systems useful for energy-autonomous, low-power, disposable electronic devices has been proved powering a LED bulb., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Biodegradable nanofibrous scaffolds as smart delivery vehicles for amino acids

  • Maione, Silvana
  • Pérez Madrigal, Maria del Mar
  • Valle Mendoza, Luis Javier del
  • Díaz Andrade, Angélica María
  • Catiavela, Carlos
  • Franco García, María Lourdes
  • Puiggalí Bellalta, Jordi
  • Alemán Llansó, Carlos
The encapsulation of amino acids (AAs) and their correct preservation before they are ingested are challenging tasks. Nonpolar (l-alanine and l-phenylalanine), polar (l-cysteine hydrochloride and l-asparagine), and charged (l-lysine hydrochloride and l-aspartic acid) AAs were loaded into biodegradable and nontoxic poly(tetramethylene succinate) (PE44) nanofibers (NFs) with electrospinning. The loading of AAs considerably affected the morphology, topography, thermal properties, and wettability of the PE44 NFs. Furthermore, although the AAs crystallized in a phase separated from the polymeric matrix, the distribution of such crystals changed into PE44 NFs and depended on their chemical nature. Release assays in enzyme-free solutions provided evidence that very significant amounts of AAs were retained in the NFs after 7 days, whereas assays in the lipase-containing solution (because lipase performs essential roles in the digestion) showed almost complete release after a few hours. Lipase preferentially attacked the PE44 regions responsible for the retention of AAs in the biphasic system and favored the almost immediate release of the biomolecules. The results displayed in this study, combined with the biocompatibility, biodegradability, and potential use of the PE44 NFs as edible nonnutritional elements, suggest that the loaded PE44–AA NFs could be used to supply essential and conditional AAs., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Isomeric cationic ionenes as n-dopant agents of poly(3,4-ethylenedioxythiophene) for in situ gelation

  • Saborío González, Maricruz
  • Bertran Cànovas, Òscar
  • Lanzalaco, Sonia
  • Häring, Marleen
  • Franco García, María Lourdes
  • Puiggalí Bellalta, Jordi
  • Díaz Díaz, David
  • Estrany Coda, Francesc
  • Alemán Llansó, Carlos
Three isomeric ionene polymers containing 1,4-diazabicyclo[2.2.2]octane (DABCO) and N,N’-(x-phenylene)dibenzamide (x= ortho- / meta- / para-) linkages have been used as dopant agents to produce n-doped poly(3,4-ethylenedioxythiophene) (PEDOT) electrodes by reducing already dedoped conducting polymer (CP) films. This work focuses on the influence of the ionene topology in both the properties of n-doped PEDOT:ionene electrodes and the success of the in situ thermal gelation of the ionene inside the CP matrix. The highest doping level is reached for the para-isomeric ionene-containing electrode, even though the content of ortho- and meta-topomers into the corresponding n-doped PEDOT:ionene electrodes is greater. Thus, many of the incorporated ionene units are not directly interacting with CP chains and, therefore, do not play an active role as n-dopant agent but they are crucial for the in situ formation of ionene hydrogels. The effect of the ionene topology is practically inexistent in properties like the specific capacitance and wettability of PEDOT:ionene films, and it is small but non-negligible in the electrochemical and thermal stability. In contrast, the surface morphology, topography, and distribution of dopant molecules significantly depend on the ionene topology. In situ thermal gelation was successful in PEDOT films n-doped with the ortho- and para-topomers, even though this assembly process was much faster for the former than for the latter. The gelation considerably improved the mechanical response of electropolymerized PEDOT film, which was practically non-existent before it. Molecular dynamics simulations prove that the strength and abundance of PEDOT···ionene specific interactions (i.e. ¿-¿ stacking, N–H···S hydrogen bonds and both N+···O and N+···S interactions) are higher for the meta-isomeric ionene, for which the in situ gelation was not achieved, than for the ortho- and para-ones., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of the atmosphere conditions in the structure, properties and solubility of fluorine-substituted hydroxyapatites

  • Rivas Cañas, Manuel
  • Valle Mendoza, Luis Javier del
  • Turón Dols, Pau
  • Puiggalí Bellalta, Jordi
  • Alemán Llansó, Carlos
The influence of synthetic conditions in the composition and properties of chemically precipitated hydroxyapatite (HAp), fluorine-substituted HAp (xF-HAp) and fluorapatite (FAp) havebeen examined consideringdifferent atmospheres (nitrogen, air and carbon dioxide),temperatures (37 ºC and 150 ºC) and pressures (hydrothermal conditions). Results indicate that the synthetic conditionsnot only affect the fluorinationdegreebut also have a pronouncedeffectonthe carbonationdegree,thecrystallinity,the surface wettability and the thermal stability. Besides, theelectrical polarization of HAp-basedmineralsmainlydepends on the fluoride content, the formation of ordered channels ofvacancies along the sintering and thermal polarization processesbecoming more difficult with increasing fluorination degree.This limits the utilization of xF-HAp and FApas electro-responsive scaffoldsandelectrocatalysts, as has been recently proposed for polarized HAp.Finally, the effects of the carbonation and the fluoridation degrees, the concentration fluoride anions supplied from an external source, and the pHon thesolubilityof HAp-based mineralshave been examined. Observationsindicate that,although strategies based on the substitution of HAp by xF-HAp or FAp have been proposed for coatings of dental implants, external fluoride anions inhibit the solubility more effectively than the fluorination of theownmineral matrix.Accordingly, HAp combined with an effective external supply of fluoride anions ismore appropriated than xF-HAp and FAp for the fabrication of dental coatings., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid polypeptide/polylactide copolymers with short phenylalanine blocks

  • Mayans Tayadella, Enric
  • Murase Fernández, Sara Keiko
  • Pérez Madrigal, Maria del Mar
  • Cativiela, Carlos
  • Alemán Llansó, Carlos
  • Puiggalí Bellalta, Jordi
This is the peer reviewed version of the following article: Mayans, E., et al. Hybrid polypeptide/polylactide copolymers with short phenylalanine blocks. "Macromolecular chemistry and physics", 29 Juliol 2018, vol. 219, núm. 17, p. 1800168-1-1800168-11, which has been published in final form at https://doi.org/10.1002/macp.201800168. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., Hybrid copolymers constituted by short l-phenylalanine (Phe) blocks (i.e., Phen with n ranging from 2 to 25) and l-lactide blocks of different length are synthesized and characterized. The diblock structure is obtained by ring opening polymerization of lactide using a Phe-oligopeptide as macroinitiator. The length of the poly(l-lactide) (PLLA) block is controlled through the [lactide]/[macroinitiator] ratio. Morphologic studies of such hybrid copolymers indicate that the assembly of PLLA can be controlled by introducing short Phe blocks. Spherulites with both positive and negative birefringence are achieved in melt crystallization as a consequence of different lamellar distributions. Instead, a high variety of structures are detected in solution-crystallized samples. Specifically, lozenge single crystals, flower-like crystals, fibrillar structures, compact spheres, ringed sperulites, dendritic structures, microfibers, and braid-like microstructures are observed. Some of the detected morphologies are characteristic of self-assembled Phe-oligopeptides, suggesting that Phe-blocks play a crucial role in the self-assembly properties., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Poly-y-glutamic Acid Hydrogels as Electrolyte for Poly(3,4-ethylenedioxythiophene)-Based Supercapacitors

  • Pérez Madrigal, Mª del Mar
  • Edo, Miquel G.
  • Díaz Andrade, Angélica María
  • Puiggalí Bellalta, Jordi
  • Alemán Llansó, Carlos
Biosynthetic poly-¿-glutamic acid (¿-PGA) has been used to produce hydrogels using cystamine as cross-linker and 1-[3-(dimethylamino)propyl]-3-ethylcarbodiimide methiodide (EDC methiodide) as condensing agent. Eight different hydrogels with different properties were formulated by varying both the molecular weight of ¿-PGA and the ¿-PGA/EDC/cystamine ratio and subsequently characterized. The most appropriate ¿-PGA hydrogel was selected to perform as solid electrolytic medium in organic electrochemical supercapacitors (OESCs) using poly(3,4-ethylenedioxythiophene) (PEDOT) electrodes based on their mechanical behavior (consistency and robustness to hold the PEDOT electrodes), morphology, and influence on the electrochemical response of the organic electrode (i.e., specific capacitance and both maximum energy and power density values). Hence, PEDOT/¿-PGA energy storage devices fabricated using the most adequate hydrogel formulation displayed a supercapacitor response of 168 F/g and a capacitance retention of 81%. Moreover, after evaluating the maximum energy and power densities (Ragone plot), cyclability, long-term stability, leakage current, and self-discharging response of PEDOT/¿-PGA OESC devices, results allow us to highlight the merits and great potential of ¿-PGA hydrogels as sustainable ion-conductive electrolytes for environmentally friendly energy storage technologies., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Loading of antibiotic into biocoated hydroxyapatite nanoparticles: smart antitumor platforms with regulated release

  • Rivas Cañas, Manuel
  • Valle Mendoza, Luis Javier del
  • Rodríguez Rivero, Anna M.
  • Turon, Pau
  • Puiggalí Bellalta, Jordi
  • Alemán Llansó, Carlos
In this research we propose a nanoplatform for anticancer therapy that is based on the combination of three components: (1) an antibiotic to target selectively the mitochondria of cancer cells, inhibiting their functions; (2) mineral nanoparticles (NPs) able to encapsulate the antibiotic and to enter into the cells across the cell membrane; and (3) a biocoating to protect the antibiotic during and/or after its regulated release, increasing its therapeutic efficacy. Chloramphenicol (CAM), a prototypical wide-spectrum antibiotic, has been used to induce mitochondrial-dysfunctions in cancer cells. Different in situ synthetic strategies have been tested to load such antibiotic into both crystalline hydroxyapatite (cHAp) and amorphous calcium phosphate (ACP) NPs. cHAp NPs showed higher loading capacity, in terms of encapsulation and superficial adsorption of CAM, and slower antibiotic release than ACP NPs. On the other hand, the protecting role played by biocoatings based on pyrophosphate and, especially, triphosphate was greater than that of biophosphonates, the anticancer therapeutic efficacy of CAM being maximized by the former. In vitro studies using healthy and cancer cell lines have demonstrated that in situ CAM-loaded cHAp NPs coated with triphosphate selectively kill a great population of cancer cells, evidencing the potential of this nanoplatform in cancer treatment., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Study of non-isothermal crystallization of polydioxanone and analysis of morphological changes occurring during heating and cooling processes

  • Márquez, Yolanda
  • Franco García, María Lourdes|||0000-0001-5968-285X
  • Turon, Pau|||0000-0001-6354-9701
  • Martínez, Juan Carlos
  • Puiggalí, Jordi|||0000-0002-0640-4474
Non-isothermal crystallization kinetics of polydioxanone (PDO), a polymer with well-established applications as bioabsorbable monofilar suture, was investigated by Avrami, Mo, and isoconversional methodologies. Results showed Avrami exponents appearing in a relatively narrow range (i.e., between 3.76 and 2.77), which suggested a three-dimensional spherulitic growth and instantaneous nucleation at high cooling rates. The nucleation mechanism changed to sporadic at low rates, with both crystallization processes being detected in the differential scanning calorimetry (DSC) cooling traces. Formation of crystals was hindered as the material crystallized because of a decrease in the motion of molecular chains. Two secondary nucleation constants were derived from calorimetric data by applying the methodology proposed by Vyazovkin and Sbirrazzuoli through the estimation of effective activation energies. In fact, typical non-isothermal crystallization analysis based on the determination of crystal growth by optical microscopy allowed secondary nucleation constants of 3.07 × 10 K and 1.42 × 10 K to be estimated. Microstructure of sutures was characterized by a stacking of lamellae perpendicularly oriented to the fiber axis and the presence of interlamellar and interfibrillar amorphous regions. The latter became enhanced during heating treatments due to loss of partial chain orientation and decrease of electronic density. Degradation under various pH media revealed different macroscopic morphologies and even a distinct evolution of lamellar microstructure during subsequent heating treatments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermally induced structural transitions of nylon 4 9 as a new example of even-odd polyamides

  • Olmo, Cristian
  • Casas, Maria Teresa
  • Martínez, Juan Carlos
  • Franco García, María Lourdes|||0000-0001-5968-285X
  • Puiggalí, Jordi|||0000-0002-0640-4474
Crystalline morphology and structure of nylon 4 9 have been studied by means of optical and transmission electron microscopies, and X-ray diffraction. Rhombic crystals were characteristic of crystallization from glycerin dilute solutions, although the final morphology was dependent on the crystallization temperature. In any case, a single electron diffraction pattern was always obtained, being characteristic a 2 mm symmetry and reflections at spacings that were indicative of a projected rectangular unit cell with hydrogen bonds established along two planar directions (i.e., the diagonals of the unit cell), as it was determined from related polyamides. Crystallization from the melt gave rise to negative birefringent spherulites with a morphology (axialitic, speckled or ringed) that was dependent on the crystallization temperature. Kinetic analysis indicated that melt crystallization took place according to two growth mechanisms (Regimes II and III), which reflect distinct secondary nucleation rates. A complex polymorphic behavior on heating and cooling processes was evidenced by real time synchrotron experiments, being determined an intermediate crystalline structure as well as the typical pseudohexagonal arrangement associated to the Brill transition. Polymorphic transitions were highly dependent on the initial crystalline structure, being enhanced the structural transition from the low temperature structure to the intermediate one when traces of the latter were initially present. Calorimetric and infrared studies supported also the detected thermal transitions of nylon 4 9.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Preparation of nanocomposites of poly("-caprolactone) and multi-walled carbon nanotubes by ultrasound micro-molding. influence of nanotubes on melting and crystallization

  • Olmo, Cristian
  • Amestoy, Hegoi
  • Casas, Maria Teresa
  • Martínez, Juan Carlos
  • Franco García, María Lourdes|||0000-0001-5968-285X
  • Sarasua, José Ramón|||0000-0002-7468-2417
  • Puiggalí, Jordi|||0000-0002-0640-4474
Ultrasound micro-molding technology was successfully applied to prepare nanocomposites based on a poly(ε-caprolactone) (PCL) matrix and multi-walled carbon nanotubes (MWCNTs). Optimization of processing parameters (i.e., amplitude, force and time) was crucial to obtain nanocomposites without any evidence of degradation, high material saving and short processing time (7-8 s). Good dispersion of nanotubes was achieved after processing previously formed solvent casting films. This dispersion was even partially detected in pieces directly obtained from powder mixtures of both components. Incorporation of MWCNTs had a remarkable influence on melting and crystallization processes, which were systematically studied by time resolved synchrotron experiments. Results indicated higher melting and crystallization temperatures for the nanocomposite, with temperature differences higher than 5 °C. Carbon nanotubes were effective nucleating agents and had an influence on crystallinity, crystallization rate and even on lamellar morphology, which was evaluated by analysis of the correlation function of small angle diffraction profiles. Crystallinity within lamellar stacks was lower for the solvent casting nanocomposite, but in this case lamellae underwent a thickening process during heating that accounted for the increase in the melting temperature. Crystallization from the melt rendered similar lamellar morphologies at the end of the process due to a lamellar insertion mechanism.