Skip to main content

ASPECTOS FUNDAMENTALES DE LA SIMULACION DE LA NUCLEACION EN MATERIA CONDENSADA

PID2019-105898GB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Young-Laplace equation for a solid-liquid interface

  • Montero de Hijes, P.
  • Shi, K.
  • Noya, Eva G.
  • Santiso, E.E.
  • Gubbins, K.E.
  • Sanz, E.
  • Vega, C.
5 pags., 2 figs., 2 tabs., The application of the Young-Laplace equation to a solid-liquid interface is considered. Computer simulations show that the pressure inside a solid cluster of hard spheres is smaller than the external pressure of the liquid (both for small and large clusters). This would suggest a negative value for the interfacial free energy. We show that in a Gibbsian description of the thermodynamics of a curved solid-liquid interface in equilibrium, the choice of the thermodynamic (rather than mechanical) pressure is required, as suggested by Tolman for the liquid-gas scenario. With this definition, the interfacial free energy is positive, and the values obtained are in excellent agreement with previous results from nucleation studies. Although, for a curved fluid-fluid interface, there is no distinction between mechanical and thermal pressures (for a sufficiently large inner phase), in the solid-liquid interface, they do not coincide, as hypothesized by Gibbs., This work was funded by Grant Nos. FIS2016-78117-P and PID2019-105898GB-C21 and FIS2017-89361-C3-2-P of the MEC, by Project No. UCM-GR17-910570 from UCM, and by the USA National Science Foundation under Award No. CBET-1855465. P.M.d.H. acknowledges financial support from the FPI Grant No. BES-2017-080074.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Homogeneous nucleation of NaCl in supersaturated solutions

  • Lamas, Cintia P.
  • Espinosa, J.R.
  • Conde, M.M.
  • Ramírez, J.
  • Montero de Hijes, P.
  • Noya, Eva G.
  • Vega, C.
  • Sanz, E.
10 pags., 7 figs., 2 tabs., The seeding method is an approximate approach to investigate nucleation that combines molecular dynamics simulations with classical nucleation theory. Recently, this technique has been successfully implemented in a broad range of nucleation studies. However, its accuracy is subject to the arbitrary choice of the order parameter threshold used to distinguish liquid-like from solid-like molecules. We revisit here the crystallization of NaCl from a supersaturated brine solution and show that consistency between seeding and rigorous methods, like Forward Flux Sampling (from previous work) or spontaneous crystallization (from this work), is achieved by following a mislabelling criterion to select such threshold (i.e. equaling the fraction of the mislabelled particles in the bulk parent and nucleating phases). This work supports the use of seeding to obtain fast and reasonably accurate nucleation rate estimates and the mislabelling criterion as one giving the relevant cluster size for classical nucleation theory in crystallization studies., This project has been funded by grants FIS2016-78117-P and PID2019-105898GB-C21 of MEC. E. G. N. thanks Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (FEDER), Grant No FIS2017-89361-C3-2-P. C. P. L. thanks Ministerio de Educacion y Formacio´n Profesional for a predoctoral Formacion Profesorado Universitario Grant No. FPU18/03326 and also Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by RES. PMdH acknowledges financial support from the FPI grant no. BES6712017-080074. J. R. E. acknowledges funding from the Oppenheimer Research fellowship and the Roger Ekins Research Fellowship of Emmanuel College. M. M. C. thanks financial support from PID2019-105898GA-C22 of the MICINN and CAM and UPM through the CavitieS project No. APOYOJOVENES-01HQ1S-129-B5E4MM from ‘‘Accion financiada por la Comunidad de Madrid en el marco del Convenio Plurianual con la Universidad Politecnica de Madrid en la linea de actuacion estimulo a la investigacion de jovenes doctores’’. The authors gratefully acknowledge Universidad Politecnica de Madrid (www.upm.es) for providing computing resources on Magerit Supercomputer., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Freezing point depression of salt aqueous solutions using the Madrid-2019 model

  • Lamas, Cintia P.
  • Vega, Carlos
  • Noya, Eva G.
17 pags., 11 figs., 5 tabs. -- Paper published as part of the special topic on Fluids Meet Solids, Salt aqueous solutions are relevant in many fields, ranging from biological systems to seawater. Thus, the availability of a force-field that is able to reproduce the thermodynamic and dynamic behavior of salt aqueous solutions would be of great interest. Unfortunately, this has been proven challenging, and most of the existing force-fields fail to reproduce much of their behavior. In particular, the diffusion of water or the salt solubility are often not well reproduced by most of the existing force-fields. Recently, the Madrid-2019 model was proposed, and it was shown that this force-field, which uses the TIP4P/2005 model for water and non-integer charges for the ions, provides a good description of a large number of properties, including the solution densities, viscosities, and the diffusion of water. In this work, we assess the performance of this force-field on the evaluation of the freezing point depression. Although the freezing point depression is a colligative property that at low salt concentrations depends solely on properties of pure water, a good model for the electrolytes is needed to accurately predict the freezing point depression at moderate and high salt concentrations. The coexistence line between ice and several salt aqueous solutions (NaCl, KCl, LiCl, MgCl2, and Li2SO4) up to the eutectic point is estimated from direct coexistence molecular dynamics simulations. Our results show that this force-field reproduces fairly well the experimentally measured freezing point depression with respect to pure water freezing for all the salts and at all the compositions considered., This project was funded by Grant No. PID2019-105898GB-C21 of the Ministry of Science, Innovation and Universities. E.G.N. acknowledges Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) (Grant No. PID2020-115722GB-C21). C.P.L. acknowledges Ministerio de Universidades for a predoctoral Formacion Profesorado Universitario (Grant No. FPU18/03326) and also Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the Red Española de Supercomputación (RES), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase diagram of the NaCl-water system from computer simulations

  • Bianco, V.
  • Conde, M.M.
  • Lamas, Cintia P.
  • Noya, Eva G.
  • Sanz, E.
12 pags., 12 figs., 1 tab., NaCl aqueous solutions are ubiquitous. They can crystallize into ice, NaCl, or NaCl · 2H2O depending on the temperature-concentration conditions. These crystallization transitions have important implications in geology, cryopreservation, or atmospheric science. Computer simulations can help understand the crystallization of these solids, which requires a detailed knowledge of the equilibrium phase diagram. We use molecular simulations in which we put at contact the solution with the solid of interest to determine points of the solid-solution coexistence lines. We follow two different approaches, one in which we narrow down the melting temperature for a given concentration and the other in which we equilibrate the concentration for a given temperature, obtaining consistent results. The phase diagram thus calculated for the selected model (TIP4P/2005 for water molecules and Joung-Cheatham for the ions) correctly predicts coexistence between the solution and ice. We were only able to determine NaCl · 2H2O-solution coexistence points at higher temperatures and concentrations than in the experiment, so we could not establish a direct comparison in this case. On the other hand, the model underestimates the concentration of the solution in equilibrium with the NaCl solid. Our results, alongside other literature evidence, seem to indicate that ion-ion interactions are too strong in the model. Our work is a good starting point for the improvement of the potential model and for the study of the nucleation kinetics of the solid phases involved in the phase diagram., This project was funded by the Ministry of Science, Innovation and Universities (Grant Nos. FIS2016-78117-P and PID2019- 105898GB-C21). V.B. acknowledges the support from the European Commission through the Marie Skłokodowska Curie Fellowship No. 748170 ProFrost. E.G.N. acknowledges Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) (Grant No. PID2020-115722GB-C21). C.P.L. acknowledges Ministerio de Universidades for a predoctoral Formación Profesorado Universitario (Grant No. FPU18/03326) and also Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the RES. M.M.C. acknowledges financial support from the MICINN (Grant No. PID2019-105898GA-C22) and CAM and UPM through the Cavities (Project No. APOYO-JOVENES-01HQ1S-129- B5E4MM) from “Acción financiada por la Comunidad de Madrid en el marco del Convenio Plurianual con la Universidad Politecnica de Madrid en la linea de actuacion estimulo a la investigacion de jovenes doctores.” The authors gratefully acknowledge the Universidad Politecnica de Madrid (www.upm.es) for providing computing resources on Magerit Supercomputer.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Homogeneous nucleation rate of methane hydrate formation under experimental conditions from seeding simulations

  • Grabowska, J.
  • Blazquez, S.
  • Sanz, E.
  • Noya, Eva G.
  • Zeron, I. M.
  • Algaba, J.
  • Miguez, J. M.
  • Blas, F. J.
  • Vega, C.
18 pags., 15 figs., 5 tabs. --This paper is part of the JCP Special Topic on Nucleation: Current Understanding Approaching 150 Years After Gibbs., In this work, we shall estimate via computer simulations the homogeneous nucleation rate for the methane hydrate at 400 bars for a supercooling of about 35 K. The TIP4P/ICE model and a Lennard-Jones center were used for water and methane, respectively. To estimate the nucleation rate, the seeding technique was employed. Clusters of the methane hydrate of different sizes were inserted into the aqueous phase of a two-phase gas-liquid equilibrium system at 260 K and 400 bars. Using these systems, we determined the size at which the cluster of the hydrate is critical (i.e., it has 50% probability of either growing or melting). Since nucleation rates estimated from the seeding technique are sensitive to the choice of the order parameter used to determine the size of the cluster of the solid, we considered several possibilities. We performed brute force simulations of an aqueous solution of methane in water in which the concentration of methane was several times higher than the equilibrium concentration (i.e., the solution was supersaturated). From brute force runs, we infer the value of the nucleation rate for this system rigorously. Subsequently, seeding runs were carried out for this system, and it was found that only two of the considered order parameters were able to reproduce the value of the nucleation rate obtained from brute force simulations. By using these two order parameters, we estimated the nucleation rate under experimental conditions (400 bars and 260 K) to be of the order of log10 (J/(m3 s)) = -7(5)., The authors acknowledge Project No. PID2019-105898GBC21 from the Ministerio de Educacion y Cultura. They also acknowledge access to supercomputer time from RES under Project No. FI-2022-1-0019. J.G. acknowledges the financial support from the Gdansk University of Technology under Project No. DEC-09/2021/IDUB/II.1/AMERICIUM/ZD grant under the AMERICIUM—“Excellence Initiative—Research University” program. A part of the computations was carried out at the Center of Informatics Tricity Academic Supercomputer and Network. This research was supported, in part, by PL-Grid Infrastructure. E.G.N. acknowledges the financial support from the Ministerio de Ciencia e Innovación under Project No. PID2020-115722GB-C21. They also acknowledge the financial support from the Ministerio de Ciencia e Innovación (Grant No. PID2021-125081NB-I00), the Junta de Andalucía (Grant No. P20-00363), and the Universidad de Huelva (Grant Nos. P.O. FEDER UHU-1255522 and FEDERUHU-202034), all four co-financed EU FEDER grants. We also acknowledge Centro de Supercomputation de Galicia for providing access to computing facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Estimation of bubble cavitation rates in a symmetrical Lennard-Jones mixture by NVT seeding simulations

  • Lamas, Cintia P.
  • Sanz, Eduardo
  • Vega, Carlos
  • Noya, Eva G.
15 pags., 6 figs., 6 tabs. -- This paper is part of the JCP Special Topic on Nucleation: Current Understanding Approaching 150 Years After Gibbs., The liquid-vapor transition starts with the formation of a sufficiently large bubble in the metastable liquid to trigger the phase transition. Understanding this process is of fundamental and practical interest, but its study is challenging because it occurs over timescales that are too short for experiments but too long for simulations. The seeding method estimates cavitation rates by simulating a liquid in which a bubble is inserted, thus avoiding the long times needed for its formation. In one-component systems, in the NpT ensemble, the bubble grows or redissolves depending on whether its size is larger or smaller than the critical size, whereas in the NVT ensemble (i.e., at constant number of particles, volume, and temperature), the critical bubble can remain in equilibrium. Provided that a good criterion is used to determine the bubble size, this method, combined with the Classical Nucleation Theory (CNT), gives cavitation rates consistent with those obtained by methods independent of the CNT. In this work, the applicability of NVT seeding to homogeneous cavitation in mixtures is demonstrated, focusing on a partially miscible symmetrical binary Lennard-Jones (LJ) liquid at a temperature within the mixing regime. At the same stretching pressure, cavitation rates are higher in the binary mixture than in the pure liquid due to the lower interfacial free energy of the mixture. Curiously, the cost of creating a bubble is similar in the pure and binary LJ liquids at the same metastability, Δμ/Δμspin, with Δμ being the difference in chemical potential between the metastable liquid and coexistence, and Δμspin between the spinodal and coexistence., This project has been funded by Grant Nos. PID2019-105898GB-C21 and PID2020-115722GB-C21 from the Agencia Estatal de Investigación. C. P. L. thanks the Ministerio de Educación y Formación Profesional (MEFP) for a predoctoral Formación Profesorado Universitario under Grant No. FPU18/03326 and also the Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the Red Española de Supercomputación (RES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The water cavitation line as predicted by the TIP4P/2005 model

  • Lamas, Cintia P.
  • Vega, Carlos
  • Noya, Eva G.
  • Sanz, Eduardo
11 pags., 8 figs., 2 tabs. -- Special Collection: Nucleation: Current Understanding Approaching 150 Years After Gibbs, The formation of vapor bubbles in a metastable liquid, cavitation, is an activated process due to the free energy cost of having both phases at contact. Such an energetic penalty enables the existence of the liquid beyond its thermodynamic borders. Establishing the stability limits of a liquid as ubiquitous as water has important practical implications and has thereby attracted a lot of attention. Different experimental strategies and theoretical analyses have been employed to measure and predict the cavitation line, or the pressure-temperature kinetic stability border of liquid water. Understanding the location of the cavitation line requires knowing the cavitation rate dependence on pressure and temperature. Such dependency is difficult to obtain in experiments, and we use molecular simulations with the TIP4P/2005 model to fill this gap. By deeply overstretching liquid water below the saturation pressure, we are able to observe and quantify spontaneous cavitation. To deal with a lower overstretching regime, we resort to the Seeding technique, which consists of analyzing simulations of a liquid containing a vapor bubble under the theoretical framework of Classical Nucleation Theory. Combining spontaneous cavitation with Seeding, we get a wide overview of the cavitation rate. We study two different temperatures (450 and 550 K) and complement our perspective with the results previously obtained at 296.4 K [Menzl et al., Proc. Natl. Acad. Sci. 113, 13582 (2016)] to establish a broad simulation-experiment comparison. We find a good agreement between simulations and both isobaric heating and isochoric cooling experiments using quartz inclusions. We are, however, unable to reconcile simulations with other experimental techniques. Our results predict a decrease in the solid-liquid interfacial free energy as the liquid becomes increasingly overstretched with a temperature independent Tolman length of 0.1 nm. Therefore, the capillarity approximation underestimates the nucleation rate. Nonetheless, it provides a fair indication of the location of the cavitation line given the steep rate vs pressure dependence. Overall, our work provides a comprehensive view of the water cavitation phenomenon and sets an efficient strategy to investigate it with molecular simulations., This project has been funded by the Ministry of Science and Innovation under Grant No. PID2019-105898GB-C21. E.G.N. thanks Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under Grant No. PID2020-115722GB-C21. C.P.L. thanks Ministerio de Universidades for a predoctoral Formacion Profesorado Universitario under Grant No. FPU18/03326 and also Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the Red Española de Supercomputación (RES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TIP 4 P 2005 Ice : Simulating water with two molecular states

  • Sedano, Lucía F.
  • Vega, Carlos
  • Noya, Eva G.
  • Sanz, Eduardo
16 pages, 15 figures, 1 table, Rigid, non-polarizable water models are very efficient from a computational point of view, and some of them have a great ability in predicting experimental properties. There is, however, little room for improvement in simulating water with this strategy, whose main shortcoming is that water molecules do not change their interaction parameters in response to the local molecular landscape. In this work, we propose a novel modeling strategy that involves using two rigid non-polarizable models as states that water molecules can adopt depending on their molecular environment. During the simulation, molecules dynamically transition from one state to another depending on a local order parameter that quantifies some local structural feature. In particular, molecules belonging to low- and high-tetrahedral order environments are represented with the TIP4P/2005 and TIP4P/Ice rigid models, respectively. In this way, the interaction between water molecules is strengthened when they acquire a tetrahedral coordination, which can be viewed as an effective way of introducing polarization effects. We call the resulting model TIP4P2005Ice and show that it outperforms either of the rigid models that build it. This multi-state strategy only slows down simulations by a factor of 1.5 compared to using a standard non-polarizable model and holds great promise for improving simulations of water and aqueous solutions., This project has been funded by Grant Nos. PID2019105898GB-C21 and PID2022-136919NB-C31 of the Spanish Ministry of Science and Innovation. E.G.N. acknowledges Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER), Grant Nos. PID2020-115722GB-C21 and PID2023151751NB-100. L.F.S. acknowledges Ministerio de Universidades for a predoctoral Formación Profesorado Universitario Grant No. FPU22/02900., Peer reviewed