Skip to main content

AGREGACION Y ORDEN EMERGENTE EN MATERIA BLANDA Y BIOLOGICA

PID2020-115722GB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Freezing point depression of salt aqueous solutions using the Madrid-2019 model

  • Lamas, Cintia P.
  • Vega, Carlos
  • Noya, Eva G.
17 pags., 11 figs., 5 tabs. -- Paper published as part of the special topic on Fluids Meet Solids, Salt aqueous solutions are relevant in many fields, ranging from biological systems to seawater. Thus, the availability of a force-field that is able to reproduce the thermodynamic and dynamic behavior of salt aqueous solutions would be of great interest. Unfortunately, this has been proven challenging, and most of the existing force-fields fail to reproduce much of their behavior. In particular, the diffusion of water or the salt solubility are often not well reproduced by most of the existing force-fields. Recently, the Madrid-2019 model was proposed, and it was shown that this force-field, which uses the TIP4P/2005 model for water and non-integer charges for the ions, provides a good description of a large number of properties, including the solution densities, viscosities, and the diffusion of water. In this work, we assess the performance of this force-field on the evaluation of the freezing point depression. Although the freezing point depression is a colligative property that at low salt concentrations depends solely on properties of pure water, a good model for the electrolytes is needed to accurately predict the freezing point depression at moderate and high salt concentrations. The coexistence line between ice and several salt aqueous solutions (NaCl, KCl, LiCl, MgCl2, and Li2SO4) up to the eutectic point is estimated from direct coexistence molecular dynamics simulations. Our results show that this force-field reproduces fairly well the experimentally measured freezing point depression with respect to pure water freezing for all the salts and at all the compositions considered., This project was funded by Grant No. PID2019-105898GB-C21 of the Ministry of Science, Innovation and Universities. E.G.N. acknowledges Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) (Grant No. PID2020-115722GB-C21). C.P.L. acknowledges Ministerio de Universidades for a predoctoral Formacion Profesorado Universitario (Grant No. FPU18/03326) and also Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the Red Española de Supercomputación (RES), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase diagram of the NaCl-water system from computer simulations

  • Bianco, V.
  • Conde, M.M.
  • Lamas, Cintia P.
  • Noya, Eva G.
  • Sanz, E.
12 pags., 12 figs., 1 tab., NaCl aqueous solutions are ubiquitous. They can crystallize into ice, NaCl, or NaCl · 2H2O depending on the temperature-concentration conditions. These crystallization transitions have important implications in geology, cryopreservation, or atmospheric science. Computer simulations can help understand the crystallization of these solids, which requires a detailed knowledge of the equilibrium phase diagram. We use molecular simulations in which we put at contact the solution with the solid of interest to determine points of the solid-solution coexistence lines. We follow two different approaches, one in which we narrow down the melting temperature for a given concentration and the other in which we equilibrate the concentration for a given temperature, obtaining consistent results. The phase diagram thus calculated for the selected model (TIP4P/2005 for water molecules and Joung-Cheatham for the ions) correctly predicts coexistence between the solution and ice. We were only able to determine NaCl · 2H2O-solution coexistence points at higher temperatures and concentrations than in the experiment, so we could not establish a direct comparison in this case. On the other hand, the model underestimates the concentration of the solution in equilibrium with the NaCl solid. Our results, alongside other literature evidence, seem to indicate that ion-ion interactions are too strong in the model. Our work is a good starting point for the improvement of the potential model and for the study of the nucleation kinetics of the solid phases involved in the phase diagram., This project was funded by the Ministry of Science, Innovation and Universities (Grant Nos. FIS2016-78117-P and PID2019- 105898GB-C21). V.B. acknowledges the support from the European Commission through the Marie Skłokodowska Curie Fellowship No. 748170 ProFrost. E.G.N. acknowledges Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) (Grant No. PID2020-115722GB-C21). C.P.L. acknowledges Ministerio de Universidades for a predoctoral Formación Profesorado Universitario (Grant No. FPU18/03326) and also Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the RES. M.M.C. acknowledges financial support from the MICINN (Grant No. PID2019-105898GA-C22) and CAM and UPM through the Cavities (Project No. APOYO-JOVENES-01HQ1S-129- B5E4MM) from “Acción financiada por la Comunidad de Madrid en el marco del Convenio Plurianual con la Universidad Politecnica de Madrid en la linea de actuacion estimulo a la investigacion de jovenes doctores.” The authors gratefully acknowledge the Universidad Politecnica de Madrid (www.upm.es) for providing computing resources on Magerit Supercomputer.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Theory and equation of state of two-component nonadditive hard-disks: an application in the colloidal regime

  • Pellicane, Giuseppe
  • Lomba, Enrique
  • Saija, Franz
22 pags., 14 figs., We use theoretical and Monte Carlo computer simulations to study thermodynamic and structural properties of a binary mixture of nonadditive hard-disks. The nonadditivity parameter is set to assume negative values so as to favour heterocoordination between the two species. The theoretical approaches include the Rescaled Virial Expansion Equation of State, which is based on the knowledge of the virial coefficients of the mixture, and the Rogers-Young Integral-Equation Theory. The comparison with Monte Carlo data shows that the microscopic theory is able to provide a reliable prediction of both the equation of state and the radial distribution functions of the system. These results are of interest because binary mixtures of colloidal particles adsorbed at the interface exhibit a wide range of self-assembly phenomena, and achieving of a reliable fluid state theory for a simple model of these systems is an essential milestone to be able to understand their nature., G. P. acknowledges the South African Center for High Performance Computing (CHPC) and Dr A. Lopis for assistance and granting access to computational resources under the allocation MATS0887. E.L. acknowledges support from the Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under grant No. PID2020-115722GB-C21.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Icosahedral quasi-crystals made of patchy colloids

  • Noya, Eva G.
  • Wong, Chak K.
  • Llombart, Pablo
  • Doye, Jonathan P. K.
ECIS 2022. 36th European Colloid & Interface Society Conference, 4 -9 September 2022 Chania, Crete, Greece, E.G.N. acknowledges financial support from the Agencia Estatal de Investigación Grant Number PID2020-115722GB-C21.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-Assembly of Optimally Packed Cylindrical Clusters inside Spherical Shells

  • Serna, Horacio
  • Meyra, Ariel G.
  • Noya, Eva G.
  • Góźdź, Wojciech T.
7 pags., 4 figs., Systems with short-range attraction and long-range repulsion can form ordered microphases in bulk and under confinement. Using grand canonical Monte Carlo simulations, we study a colloidal system with competing interactions under confinement in narrow spherical shells at thermodynamic conditions at which the hexagonal phase of cylindrical clusters is stable in bulk. We observe spontaneous formation of different ordered structures. The results of the simulations are in a very good agreement with the predictions of a simple mathematical model based on the geometry and optimal packing of colloidal clusters. The results of the simulations and the explanation provided by a relatively simple geometric model may be helpful in manufacturing copolymer nanocapsules and may indicate possible ways of coiling DNA strands on spherical objects., We would like to acknowledge the support from NCN (grant no 2018/30/Q/ST3/00434) and from the Agencia Estatal de Investigación and the Fondo Europeo de Desarrollo Regional (grant no PID2020-115722GB-C21). This project has received funding from the European Union Horizon 2020 research and innovation under the Marie Skłodowska-Curie grant agreement no. 734276 (CONIN). Additional funding was received from the Polish Ministry of Science and Higher Education for the implementation of the project no. 734276 in the years 2017−2022., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural study of water/alcohol mixtures adsorbed in MFI and MEL porosils

  • Gómez-Álvarez, Paula
  • Noya, Eva G.
  • Lomba, Enrique
9 pags., 8 figs., 1 tab., Ethanol and other biofuels produced during biomass conversion must be separated from the fermentation broth (mainly water) before being used as a fuel. This can be addressed by adsorption-based separation using porous materials. The key objective of this study is to obtain a molecular understanding of water and alcohol adsorption in pure-silica zeolites, particularly in silicalite-1 (MFI-type zeolite) and silicalite-2 (MEL-type zeolite). Molecular simulation techniques are used for this purpose. They provide information on the configuration of the fluids, and so the microscopic network structure of the adsorbed polar molecules can be characterized by using a specific criterion of hydrogen bonding formation. We conducted Grand-Canonical Monte Carlo simulations to compute the adsorption isotherms of pure short alcohols and water and from the liquid alcohol/water binary mixtures throughout the composition range. Despite MFI and MEL being structurally very similar, we found differences in adsorption, which are related to the underlying molecular behavior. While water intrusion occurs by applying pressure due to stronger water-water than water–silicalite interactions, notable water adsorption from the mixture occurs first by hydrogen bond formation with the adsorbed alcohols and then by self-association. A higher degree of water clustering in MEL compared to MFI zeolite, promoted by its straight channels, leads to relatively lower uptakes of water in the latter zeolite (in favor of alcohol molecules)., The authors acknowledge the support from the Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under Grant No. PID2020-115722 GB-C21. Funding for open access charge: Universidad de Huelva / CBUA.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Homogeneous nucleation rate of methane hydrate formation under experimental conditions from seeding simulations

  • Grabowska, J.
  • Blazquez, S.
  • Sanz, E.
  • Noya, Eva G.
  • Zeron, I. M.
  • Algaba, J.
  • Miguez, J. M.
  • Blas, F. J.
  • Vega, C.
18 pags., 15 figs., 5 tabs. --This paper is part of the JCP Special Topic on Nucleation: Current Understanding Approaching 150 Years After Gibbs., In this work, we shall estimate via computer simulations the homogeneous nucleation rate for the methane hydrate at 400 bars for a supercooling of about 35 K. The TIP4P/ICE model and a Lennard-Jones center were used for water and methane, respectively. To estimate the nucleation rate, the seeding technique was employed. Clusters of the methane hydrate of different sizes were inserted into the aqueous phase of a two-phase gas-liquid equilibrium system at 260 K and 400 bars. Using these systems, we determined the size at which the cluster of the hydrate is critical (i.e., it has 50% probability of either growing or melting). Since nucleation rates estimated from the seeding technique are sensitive to the choice of the order parameter used to determine the size of the cluster of the solid, we considered several possibilities. We performed brute force simulations of an aqueous solution of methane in water in which the concentration of methane was several times higher than the equilibrium concentration (i.e., the solution was supersaturated). From brute force runs, we infer the value of the nucleation rate for this system rigorously. Subsequently, seeding runs were carried out for this system, and it was found that only two of the considered order parameters were able to reproduce the value of the nucleation rate obtained from brute force simulations. By using these two order parameters, we estimated the nucleation rate under experimental conditions (400 bars and 260 K) to be of the order of log10 (J/(m3 s)) = -7(5)., The authors acknowledge Project No. PID2019-105898GBC21 from the Ministerio de Educacion y Cultura. They also acknowledge access to supercomputer time from RES under Project No. FI-2022-1-0019. J.G. acknowledges the financial support from the Gdansk University of Technology under Project No. DEC-09/2021/IDUB/II.1/AMERICIUM/ZD grant under the AMERICIUM—“Excellence Initiative—Research University” program. A part of the computations was carried out at the Center of Informatics Tricity Academic Supercomputer and Network. This research was supported, in part, by PL-Grid Infrastructure. E.G.N. acknowledges the financial support from the Ministerio de Ciencia e Innovación under Project No. PID2020-115722GB-C21. They also acknowledge the financial support from the Ministerio de Ciencia e Innovación (Grant No. PID2021-125081NB-I00), the Junta de Andalucía (Grant No. P20-00363), and the Universidad de Huelva (Grant Nos. P.O. FEDER UHU-1255522 and FEDERUHU-202034), all four co-financed EU FEDER grants. We also acknowledge Centro de Supercomputation de Galicia for providing access to computing facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural characterization of systems with competing interactions confined in narrow spherical shells

  • Serna, Horacio
  • Meyra, Ariel G.
  • Noya, Eva G.
  • Góźdź, Wojciech T.
15 pags., 9 figs., Systems with short-range attraction and long-range repulsion can form ordered microphases in bulk and under confinement. In fact, confinement has been proven to be a good strategy to induce the formation of novel ordered microphases that might be appealing to the development of functional nanomaterials. Using Grand Canonical Monte Carlo (GCMC) simulations, we study a model colloidal system with competing interactions under confinement in narrow spherical shells at thermodynamic conditions under which the hexagonal phase is stable in bulk. We observe the formation of three parent ordered structures formed by toroidal clusters and two spherical clusters (Type I), toroidal clusters and one spherical cluster (Type II), and toroidal clusters alone (Type III), depending on the radius of the confining shell, that can often coexist with other related structures derived from these parent ones by a simple transformation, in which the system is divided into two hemispheres that are rotated with respect to each other by a given angle. We propose a general method to characterize and predict the structures obtained under confinement in spherical shells in systems able to self-assemble into a hexagonal phase in bulk. We also show that deforming the spherical shells into ellipsoidal ones affects the structure of the system in such a way that helical structures are favoured by prolate ellipsoids and toroidal structures by oblate ellipsoids., We would like to acknowledge the support from NCN grant No 2018/30/Q/ST3/00434 and from the Agencia Estatal de Investigacion and the Fondo Europeo de Desarrollo Regional (FEDER), Grant No PID2020-115722GB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Estimation of bubble cavitation rates in a symmetrical Lennard-Jones mixture by NVT seeding simulations

  • Lamas, Cintia P.
  • Sanz, Eduardo
  • Vega, Carlos
  • Noya, Eva G.
15 pags., 6 figs., 6 tabs. -- This paper is part of the JCP Special Topic on Nucleation: Current Understanding Approaching 150 Years After Gibbs., The liquid-vapor transition starts with the formation of a sufficiently large bubble in the metastable liquid to trigger the phase transition. Understanding this process is of fundamental and practical interest, but its study is challenging because it occurs over timescales that are too short for experiments but too long for simulations. The seeding method estimates cavitation rates by simulating a liquid in which a bubble is inserted, thus avoiding the long times needed for its formation. In one-component systems, in the NpT ensemble, the bubble grows or redissolves depending on whether its size is larger or smaller than the critical size, whereas in the NVT ensemble (i.e., at constant number of particles, volume, and temperature), the critical bubble can remain in equilibrium. Provided that a good criterion is used to determine the bubble size, this method, combined with the Classical Nucleation Theory (CNT), gives cavitation rates consistent with those obtained by methods independent of the CNT. In this work, the applicability of NVT seeding to homogeneous cavitation in mixtures is demonstrated, focusing on a partially miscible symmetrical binary Lennard-Jones (LJ) liquid at a temperature within the mixing regime. At the same stretching pressure, cavitation rates are higher in the binary mixture than in the pure liquid due to the lower interfacial free energy of the mixture. Curiously, the cost of creating a bubble is similar in the pure and binary LJ liquids at the same metastability, Δμ/Δμspin, with Δμ being the difference in chemical potential between the metastable liquid and coexistence, and Δμspin between the spinodal and coexistence., This project has been funded by Grant Nos. PID2019-105898GB-C21 and PID2020-115722GB-C21 from the Agencia Estatal de Investigación. C. P. L. thanks the Ministerio de Educación y Formación Profesional (MEFP) for a predoctoral Formación Profesorado Universitario under Grant No. FPU18/03326 and also the Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the Red Española de Supercomputación (RES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The water cavitation line as predicted by the TIP4P/2005 model

  • Lamas, Cintia P.
  • Vega, Carlos
  • Noya, Eva G.
  • Sanz, Eduardo
11 pags., 8 figs., 2 tabs. -- Special Collection: Nucleation: Current Understanding Approaching 150 Years After Gibbs, The formation of vapor bubbles in a metastable liquid, cavitation, is an activated process due to the free energy cost of having both phases at contact. Such an energetic penalty enables the existence of the liquid beyond its thermodynamic borders. Establishing the stability limits of a liquid as ubiquitous as water has important practical implications and has thereby attracted a lot of attention. Different experimental strategies and theoretical analyses have been employed to measure and predict the cavitation line, or the pressure-temperature kinetic stability border of liquid water. Understanding the location of the cavitation line requires knowing the cavitation rate dependence on pressure and temperature. Such dependency is difficult to obtain in experiments, and we use molecular simulations with the TIP4P/2005 model to fill this gap. By deeply overstretching liquid water below the saturation pressure, we are able to observe and quantify spontaneous cavitation. To deal with a lower overstretching regime, we resort to the Seeding technique, which consists of analyzing simulations of a liquid containing a vapor bubble under the theoretical framework of Classical Nucleation Theory. Combining spontaneous cavitation with Seeding, we get a wide overview of the cavitation rate. We study two different temperatures (450 and 550 K) and complement our perspective with the results previously obtained at 296.4 K [Menzl et al., Proc. Natl. Acad. Sci. 113, 13582 (2016)] to establish a broad simulation-experiment comparison. We find a good agreement between simulations and both isobaric heating and isochoric cooling experiments using quartz inclusions. We are, however, unable to reconcile simulations with other experimental techniques. Our results predict a decrease in the solid-liquid interfacial free energy as the liquid becomes increasingly overstretched with a temperature independent Tolman length of 0.1 nm. Therefore, the capillarity approximation underestimates the nucleation rate. Nonetheless, it provides a fair indication of the location of the cavitation line given the steep rate vs pressure dependence. Overall, our work provides a comprehensive view of the water cavitation phenomenon and sets an efficient strategy to investigate it with molecular simulations., This project has been funded by the Ministry of Science and Innovation under Grant No. PID2019-105898GB-C21. E.G.N. thanks Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under Grant No. PID2020-115722GB-C21. C.P.L. thanks Ministerio de Universidades for a predoctoral Formacion Profesorado Universitario under Grant No. FPU18/03326 and also Ayuntamiento de Madrid for a Residencia de Estudiantes grant. The authors acknowledge the computer resources and technical assistance provided by the Red Española de Supercomputación (RES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Visualizing defect dynamics by assembling the colloidal graphene lattice

  • Swinkels, Piet J. M.
  • Gong, Zhe
  • Sacanna, Stefano
  • Noya, Eva G.
  • Schall, Peter
9 pags., 4 figs., Graphene has been under intense scientific interest because of its remarkable optical, mechanical and electronic properties. Its honeycomb structure makes it an archetypical two-dimensional material exhibiting a photonic and phononic band gap with topologically protected states. Here, we assemble colloidal graphene, the analogue of atomic graphene using pseudo-trivalent patchy particles, allowing particle-scale insight into crystal growth and defect dynamics. We directly observe the formation and healing of common defects, like grain boundaries and vacancies using confocal microscopy. We identify a pentagonal defect motif that is kinetically favoured in the early stages of growth, and acts as seed for more extended defects in the later stages. We determine the conformational energy of the crystal from the bond saturation and bond angle distortions, and follow its evolution through the energy landscape upon defect rearrangement and healing. These direct observations reveal that the origins of the most common defects lie in the early stages of graphene assembly, where pentagons are kinetically favoured over the equilibrium hexagons of the honeycomb lattice, subsequently stabilized during further growth. Our results open the door to the assembly of complex 2D colloidal materials and investigation of their dynamical, mechanical and optical properties., P.S. acknowledges funding through Vici grant 680-47-615 from the Netherlands Organization for Scientific Research (NWO). S.S. acknowledges support from the NSF CAREER award DMR-1653465. E.G.N. acknowledges funding from Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER), Grant No PID2020-115722GB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The temperature of maximum density of diluted aqueous solutions of non-polar solutes: A molecular simulation study using TIP4P/2005 water and LJ point solutes

  • González-Salgado, D.
  • Noya, Eva G.
  • Lomba, Enrique
10 pags., 9 figs., 1 tab., The effect of non polar solutes on the temperature of maximum density of water, TMD, is analyzed in detail by means of molecular simulations over an ample pressure interval ranging from negative to very high pressures. Non polar solutes are represented by single Lennard-Jones (LJ) sites, whose non-polar character is tuned with the width and depth of the Lennard-Jones water-solute potential parameters. Our analysis is focused on the behavior of the partial molar volume of the solute at infinite solution, whose thermal dependence is correlated with changes in the TMD. We find that for pressures below −200 bar all possible LJ water-solute potential parameters decrease the TMD, i.e. the solute acts as a “structure breaker”. At higher pressures, it is always possible to find a range of LJ parameters which induce an increase of the TMD, whose magnitude rises gradually with pressure. Our results are consistent with previous simulations of non polar gases in solution and with theoretical studies in the case of small LJ centers. It will be shown that the partial molar volume of an ideal gas at infinite dilution can provide information concerning the existence and size of the LJ parameter space that induces TMD increases for a given water model. Finally, we analyze the changes in the TMD in terms of the competition between low density and high density water states. We find that the temperature dependence of the variation of the low density water mole fraction with the addition of LJ solutes seems to be at the source of the changes in the TMD., Authors want to thank CESGA (Galician Center of Supercomputing) for the access to their computer facilities and acknowledge the financial support from the grants no. PID2020-115722GB-C22 and PID2020-115722GB-C21 funded by MCIN/AEI/10.13039/-501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phases of surface-confined trivalent colloidal particles

  • Swinkels, Piet J. M.
  • Gong, Zhe
  • Sacanna, Stefano
  • Noya, Eva G.
  • Schall, Peter
9 pags., 4 figs., Patchy colloids promise the design and modelling of complex materials, but the realization of equilibrium patchy particle structures remains challenging. Here, we assemble pseudo-trivalent particles and elucidate their phase behaviour when confined to a plane. We observe the honeycomb phase, as well as more complex amorphous network and triangular phases. Structural analysis performed on the three condensed phases reveals their shared structural motifs. Using a combined experimental and simulation approach, we elucidate the energetics of these phases and construct the phase diagram of this system, using order parameters to determine the phase coexistence lines. Our results reveal the rich phase behaviour that a relatively simple patchy particle system can display, and open the door to a larger joined simulation and experimental exploration of the full patchy-particle phase space., P. S. acknowledges funding through Vici grant 680-47-615 from the Netherlands Organization for Scientific Research (NWO). S.S. acknowledges support from the NSF CAREER award DMR1653465. E. G. N. acknowledges funding from Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (FEDER), Grant No PID2020-115722GB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solvation vs concentration fluctuations: confined dilute electrolytes near demixing at constant potential

  • Lomba, Enrique
  • Cardeñosa, Ismael
  • Varela, Luis Miguel
10 pags., 9 figs., 2 tabs., In a recent paper, the effect of concentration fluctuations in a simple fully symmetric model of dilute electrolyte, confined between two planar electrodes, was investigated using constant charge simulations in the vicinity of the solute-solvent demixing transition. In agreement with previous theoretical findings it was shown that the total capacitance was enhanced by the occurrence of concentration fluctuations. In this work we will resort to constant potential simulations to show that the same effect is to be found in the differential capacitance. Additionally, here we will consider the effects of ion solvation by a polar solvent modelled by TIP4P/2005 water. Finally, the original fully symmetric ionic solute will be replaced by a three-site coarse grained model for a well know room temperature ionic liquid, 1-butyl-3-methyl-imidazolium tetrafluoroborate ([BMI] (Formula presented.) [BF (Formula presented.)] (Formula presented.))). Our results show the presence of strong local fields within the capacitor due to incomplete local screening, and a marked asymmetry in the charge distribution. The expected capacity enhancement due to concentration fluctuations is completely mitigated by solvation effects and the response of the polar solvent to the external field., EL acknowledges the support from the Agencia Estatal deInvestigación under Grant No. PID2020-115722GB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Isothermal compressibility and water self-diffusion coefficient in supercooled salt aqueous solutions using the Madrid-2019 model

  • Sedano, L. F.
  • Vega, C.
  • Noya, Eva G.
15 pags., 10 figs., 2 tabs. -- RULL-ABASCAL SPECIAL ISSUE FOR STATISTICAL PHYSICS IN SPAIN, The isothermal compressibility and self-diffusion coefficient of water in Li (Formula presented.), Na (Formula presented.), (Formula presented.), (Formula presented.) and (Formula presented.) chloride and sulfate salts aqueous solutions is calculated by means of molecular simulations using the Madrid-2019 force-field, that uses TIP4P/2005 model for water and assigns scaled charges for ions. Our simulations predict that the isothermal compressibilities of these salts retain the anomalous behaviour of water, i.e. compressibility increases as temperature decreases, contrary to the behaviour of normal liquids. A maximum in the isothermal compressibility, analogous to that of pure water, is observed for some of the salt solutions. For the 1 m NaCl solution, simulations are performed at several pressures up to 1000 bar to estimate the location of the second critical point. We estimate that the liquid-liquid critical point is located at 190 K and 1000 bar, i.e. it is shifted to slightly higher temperatures and lower pressures with respect to the most accurate estimation of its location in pure TIP4P/2005 water (172 K and 1861 bar). Regarding the self-diffusion of water, all salts increase water mobility in the very supercooled regime (at temperatures within 200–230 K), with (Formula presented.) producing the largest increase in water mobility, while (Formula presented.) and (Formula presented.) are the least effective in enhancing the self-diffusion coefficient of water., This project has been funded by the Agencia Estatal de Investigación [grant numbers PID2022-136919NB-C31 and PID2020-115722GB-C21]. L. F. S. thanks Ministerio de Educación y Formación Profesional (MEFP) for a predoctoral Formacion Profesorado Universitario [grant number FPU22/02900]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase diagram of NaCl–water by computer simulations: performance of non-polarizable force-fields

  • Cassinello, Guillermo
  • Noya, Eva G.
  • Sanz, Eduardo
  • Lamas, Cintia P.
11 pages, 6 figures, 1 table, This study evaluates the capabilities of two new ion force fields (Tanaka [Yagasaki et al. JCTC 2020] and Madrid-2019 [Zerón et al. JCP 2019]) in conjunction with the TIP4P/2005 model for water in reproducing the NaCl–water phase diagram using molecular dynamics direct coexistence simulations. The performance of those force-fields is critically compared with the phase diagram recently reported for the Joung Cheatham-TIP4P/2005 force-field [Bianco et al. JCP 2022]. Excellent agreement between the three force-fields and experiments is found for the ice-solution line due to the dominance of the water model in the location of this line. For the NaCl-solution line, the Tanaka and the Madrid-2019 models accurately predict solubility at ambient temperature, but they underestimate somewhat the experimental line as temperature increases. The JC model underestimates NaCl solubility both at ambient and at high temperatures. All models underestimate the stability of the NaCl·2H (Formula presented.) O solid, which remains metastable with respect to NaCl. Equilibration of the NaCl·2H (Formula presented.) O-solution system is challenging at low temperatures due to the slow diffusion of concentrated NaCl solutions. The phase diagrams obtained serve as a foundation for studying crystal nucleation, and solid-solution interfaces, and provide very valuable information for the development of imporved NaCl–H (Formula presented.) O force-fields., This project has been funded by grants PID2022-136919NB-C31 and PID2020-115722GB-C21 from the Agencia Estatal de Investigación. The authors acknowledge the computerresources and technical assistance provided by the RES., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Is it possible to overheat ice? The activated melting of TIP4P/Ice at solid-vapor coexistence

  • Baran, Lukasz
  • Llombart,Pablo
  • Noya, Eva G.
  • MacDowell, L. G.
18 pages, 5 figures, 5 tables, A widely accepted phenomenological rule states that solids with free surfaces cannot be overheated. In this work we discuss this statement critically under the light of the statistical thermodynamics of interfacial roughening transitions. Our results show that the basal face of ice as described by the TIP4P/Ice model can remain mechanically stable for more than one hundred nanoseconds when overheated by 1 K, and for several hundreds of nanoseconds at smaller overheating despite the presence of a significant quasi-liquid layer at the surface. Such time scales, which are often of little experimental significance, can become a concern for the determination of melting points by computer simulations using the direct coexistence method. In the light of this observation, we reinterpret computer simulations of ice premelting and show that current results for the TIP4P/Ice model all imply a scenario of incomplete surface melting. Using a thermodynamic integration path, we reassess our own estimates for the Laplace pressure difference between water and vapor. These calculations are used to measure the disjoining pressure of premelting liquid films and allow us to confirm a minimum of the interfacial free energy at finite premelting thickness of about one nanometer., We acknowledge funding from the Spanish Agencia Estatalde Investigación under research grant PID2020-115722GB-C21/AEI/10.13039/501100011033, partially sponsored withFEDER funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TIP 4 P 2005 Ice : Simulating water with two molecular states

  • Sedano, Lucía F.
  • Vega, Carlos
  • Noya, Eva G.
  • Sanz, Eduardo
16 pages, 15 figures, 1 table, Rigid, non-polarizable water models are very efficient from a computational point of view, and some of them have a great ability in predicting experimental properties. There is, however, little room for improvement in simulating water with this strategy, whose main shortcoming is that water molecules do not change their interaction parameters in response to the local molecular landscape. In this work, we propose a novel modeling strategy that involves using two rigid non-polarizable models as states that water molecules can adopt depending on their molecular environment. During the simulation, molecules dynamically transition from one state to another depending on a local order parameter that quantifies some local structural feature. In particular, molecules belonging to low- and high-tetrahedral order environments are represented with the TIP4P/2005 and TIP4P/Ice rigid models, respectively. In this way, the interaction between water molecules is strengthened when they acquire a tetrahedral coordination, which can be viewed as an effective way of introducing polarization effects. We call the resulting model TIP4P2005Ice and show that it outperforms either of the rigid models that build it. This multi-state strategy only slows down simulations by a factor of 1.5 compared to using a standard non-polarizable model and holds great promise for improving simulations of water and aqueous solutions., This project has been funded by Grant Nos. PID2019105898GB-C21 and PID2022-136919NB-C31 of the Spanish Ministry of Science and Innovation. E.G.N. acknowledges Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER), Grant Nos. PID2020-115722GB-C21 and PID2023151751NB-100. L.F.S. acknowledges Ministerio de Universidades for a predoctoral Formación Profesorado Universitario Grant No. FPU22/02900., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A One-Component Patchy-Particle Icosahedral Quasicrystal

  • Noya, Eva G.
  • Doye, Jonathan P. K.
9 pages, 3 figures, Designing particles that are able to form icosahedral quasicrystals (IQCs) and that are as simple as possible is not only of fundamental interest but is also important to the potential realization of IQCs in materials other than metallic alloys. Here we introduce one-component patchy-particle systems that in simulations are able to form face-centered IQCs that are made up of interconnected icosahedra. The directional bonding of the particles facilitates the formation of a network of bonds with icosahedral orientational order and hence quasiperiodic positional order. The assembled quasicrystals have similar energies to periodic approximants but are entropically stabilized by phason disorder. Their long-range quasiperiodic order is confirmed by a higher-dimensional analysis. These materials, which are predicted to have an almost spherical photonic band gap, can potentially be realized via protein design and DNA origami particles., EGN acknowledges financial support by grants PID2020-115722GB-C21 and PID2023-151751NB-I00 funded byMCIN/AEI/10.13039/501100011033. Computer resourcesand technical assistance provided by CESGA (Centro deSupercomputación de Galicia) are also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A patchy-particle three-dimensional octagonal quasicrystal

  • Kowaguchi, A.
  • Mehta, S.
  • Doye, J.P.K.
  • Noya, Eva G.
11 pages, 7 figures, 1 table . -- Special Collection: Carlos Vega Festschrift, We devise an ideal three-dimensional octagonal quasicrystal that is based upon the two-dimensional Ammann–Beenker tiling and that is potentially suitable for realization with patchy particles. Based on an analysis of its local environments, we design a binary system of five- and eight-patch particles that in simulations assembles into a three-dimensional octagonal quasicrystal. The local structure is subtly different from the original ideal quasicrystal possessing a narrower coordination-number distribution; in fact, the eight-patch particles are not needed and a one-component system of the five-patch particles assembles into an essentially identical octagonal quasicrystal. We also consider a one-component system of the eight-patch particles; this assembles into a cluster with a number of crystalline domains, which, because of the coherent boundaries between the crystallites, has approximate eightfold order. We envisage that these systems could be realized using DNA origami or protein design., We are grateful for financial support from Agencia Estatal de Investigación through Grant Nos. PID2020-115722GBC21 and PID2023-151751NB-I00 funded by MCIN/AEI/10. 13039/501100011033 (E.G.N.), the Special Fund for Young Researchers of Keio University, the Ishii Ishibashi Kikin, and JSPS KAKENHIGrantNo.JP202222673(A.K.). We acknowledge the use of the University of Oxford Advanced Research Computing (ARC) facility. E.G.N. would like to thank Carlos Vega for his long-lasting friendship and for being a constant source of inspiration and support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A patchy-particle three-dimensional octagonal quasicrystal

  • Kowaguchi, A.
  • Mehta, S.
  • Doye, J.P.K.
  • Noya, Eva G.
11 pages, 7 figures, 1 table . -- Special Collection: Carlos Vega Festschrift, We devise an ideal three-dimensional octagonal quasicrystal that is based upon the two-dimensional Ammann–Beenker tiling and that is potentially suitable for realization with patchy particles. Based on an analysis of its local environments, we design a binary system of five- and eight-patch particles that in simulations assembles into a three-dimensional octagonal quasicrystal. The local structure is subtly different from the original ideal quasicrystal possessing a narrower coordination-number distribution; in fact, the eight-patch particles are not needed and a one-component system of the five-patch particles assembles into an essentially identical octagonal quasicrystal. We also consider a one-component system of the eight-patch particles; this assembles into a cluster with a number of crystalline domains, which, because of the coherent boundaries between the crystallites, has approximate eightfold order. We envisage that these systems could be realized using DNA origami or protein design., We are grateful for financial support from Agencia Estatal de Investigación through Grant Nos. PID2020-115722GBC21 and PID2023-151751NB-I00 funded by MCIN/AEI/10. 13039/501100011033 (E.G.N.), the Special Fund for Young Researchers of Keio University, the Ishii Ishibashi Kikin, and JSPS KAKENHIGrantNo.JP202222673(A.K.). We acknowledge the use of the University of Oxford Advanced Research Computing (ARC) facility. E.G.N. would like to thank Carlos Vega for his long-lasting friendship and for being a constant source of inspiration and support., Peer reviewed