Skip to main content

CREACION DE MODELOS 5D DE EDIFICIOS MULTI-PLANTA UTILIZANDO PLATAFORMAS MOVILES DE DIGITALIZACION TERMICA

PID2019-108271RB-C31

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic generation of as-is BEM models of buildings

  • Adan, A.
  • Vilar-Abad, Alejandro
  • Ramón-Constantí, Amanda|||0000-0001-7084-8275
  • Vivancos, José-Luis|||0000-0002-8524-5466
  • Aparicio Fernandez, Carolina Sabina|||0000-0003-0197-9452
[EN] This paper shows a method with which to create a proprietary as-is 3D semantic thermal model of a building and transform it into standard BEM formats. Geometric and relational information regarding the essential structural elements of the building (i.e., zone, ceiling, floor, wall, door, etc.) is, together with their corresponding as-is temperatures, first extracted from thermal points clouds of the scene and then adapted to the standard geometric BEM requirements. Non-geometric properties concerning definitions and properties of envelopes, windows and doors are also defined as essential information. After all this information has been collected, a BEM file is eventually generated in order to be used in energy simulation software. One of the specific features of this work is the generation of as-is BIM formats of the interior of a building that are later adapted for energy simulation applications in EnergyPlus and TRNSYS software. An ASCII file containing the temperatures of the main structural elements of the building is also created. The method has been tested on real thermal point clouds of the ground floor of a building, yielding promising results., This research was funded by the European Regional Development Fund (SBPLY/19/180501/) and the Ministry of Science and In-novation (PID2019-108271RB-C31, PROYECTO/AEI/10.13039/501100011033 and PID2019-108271RB-C33)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Measuring the Short-Term Degradation of Stone in Historical Buildings

  • Quintana, Blanca
  • Adan, Antonio
  • Ramón-Constantí, Amanda|||0000-0001-7084-8275
[EN] This paper proposes a methodology with which to measure the slight erosion undergone by valuable heritage pieces in a short period of time. The problems dealt with by our method concern the irregular (free-shape) geometry of the piece to be measured, the di-culty involved in achieving the )ne registration required among diffierent samples of the piece, the slight loss of material in a short period of time and the suitable de)nition of descriptors that will help to carry out a reliable qualitative and quantitative analysis. This document proposes a basic methodology that is able to tackle each of the aforementioned problems. An in-depth explanation of the degradation analysis has been carried out on a representative case study, including the qualitative and quantitative procedures employed. The results obtained lead us to believe that this methodology could be reproduced and applied to similar degradation problems related to old buildings., The work was supported by the~European Regional Development Fund [SBPLY/19/180501]; Ministerio de Ciencia e Innovacion [PID2019-108271RB-C31].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proposing 3D Thermal Technology for Heritage Building Energy Monitoring

  • Adan, Antonio
  • Pérez, Víctor
  • Prieto, Samuel A.
  • Vivancos, José-Luis|||0000-0002-8524-5466
  • Aparicio Fernandez, Carolina Sabina|||0000-0003-0197-9452
[EN] The energy monitoring of heritage buildings has, to date, been governed by methodologies and standards that have been defined in terms of sensors that record scalar magnitudes and that are placed in specific positions in the scene, thus recording only some of the values sampled in that space. In this paper, however, we present an alternative to the aforementioned technologies in the form of new sensors based on 3D computer vision that are able to record dense thermal information in a three-dimensional space. These thermal computer vision-based technologies (3D-TCV) entail a revision and updating of the current building energy monitoring methodologies. This paper provides a detailed definition of the most significant aspects of this new extended methodology and presents a case study showing the potential of 3D-TCV techniques and how they may complement current techniques. The results obtained lead us to believe that 3D computer vision can provide the field of building monitoring with a decisive boost, particularly in the case of heritage buildings, This research was funded by the European Regional Development Fund (SBPLY/19/180501/000094 project) and the Ministry of Science and Innovation (PID2019-108271RB-C31 and PID2019108271RB-C33).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal Characterization of Buildings with as-is Thermal-Building Information Modelling

  • Pérez-Andreu, Víctor
  • Adán Oliver, Antonio
  • Aparicio Fernandez, Carolina Sabina|||0000-0003-0197-9452
  • Vivancos, José-Luis|||0000-0002-8524-5466
[EN] Developing methodologies to accurately characterise the energy conditions of existing building stock is a fundamental aspect of energy consumption reduction strategies. To that end, a case study using a thermal information modelling method for existing buildings (as-is T-BIM) is reported. This proposed new method is based on the automatic processing of 3D thermal clouds of interior zones of a building that generates a semantic proprietary model that contains time series of surface temperatures assigned to its surface elements. The proprietary as-is T-BIM automatically generates an as-is BEM model with gbXML standards for energy simulation. This is a multi-zone energy model of the building. In addition, the surface temperature data series of the as-is T-BIM model elements permit the calculation of their thermal transmittances, increasing the calibration options of the obtained as-is BEM model. To test the as-is TBIM method, a case study compares the as-is BEM model obtained by as-is T-BIM methods with the one obtained by standard methods for the same building. The results demonstrate differences in geometry, transmittance, and infiltration values, as well as insignificant differences in annual air conditioning energy consumption or the comfort parameters tested. This seems to indicate shorter modelling times and greater accuracy of the as-is T-BIM model., This research was funded by the European Regional Development Fund (SBPLY/19/180501/000094 project) and the Ministry of Science and Innovation (PID2019-108271RB-C31 and PID2019-108271RB-C33).