Skip to main content

SINTESIS "BOTTON-UP" DE NANOESTRUCTURAS DE CARBONO: APLICACIONES PARA LA ENERGIA

PID2020-114653RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo de revisión (ReviewArticle)

Organic solar cells: Principles, materials, and working mechanism

  • Elisa Antolin
  • Urieta Mora, Javier
  • Molina Ontoria, Agustín
  • Martín León, Nazario
The most significant advances in the development of organic solar cells (OSCs) along the last three decades are presented. The key aspects of OSCs such as the photovoltaic principles regarding the mechanism for the generation of the exciton and the transport of the carriers to the respective electrodes are explained. Furthermore, the most common organic materials used as the photoactive layer are discussed, highlighting those that have been more successful and extensively studied in the literature such as donor polymers (PM6), fullerene acceptor ([60]PCBM), or small-molecule acceptors (ITIC and Y6 families). The evolution of the efficiency of OSCs with the introduction of these innovative materials has also been included. Other critical issue for a better understanding of OSCs, namely the control of the morphology in the device fabrication is also considered by gathering the most important advances on this critical photovoltaic parameter. In addition, the review presents some technology metrics regarding the cost of the energy, the durability of the devices, or the environmental impact that are critical for the coming commercialization of this advanced technology.
Docta Complutense
Publication Artículo científico (JournalArticle)

Enantioselective synthesis of a two-fold inherently chiral molecular nanographene

  • Buendía, Manuel
  • Fernández García, Jesús Manuel
  • Perles Hernáez, Josefina
  • Filippone, Salvatore
  • Martín León, Nazario
The introduction and precise control of stereogenic elements in chemical structures is typically a challenging task. Most asymmetric methods require the presence of a heteroatom in the starting substrates acting as an anchor point for the successful transfer of chiral information. For this reason, compounds comprising only carbon atoms, such as optically active molecular nanographenes, are usually obtained as racemates, and isolated by chiral chromatographic separation. Here, we report an enantioselective strategy that uses three stereocontrolled synthetic steps to introduce and extend three different types of stereogenic elements, namely central, axial and helicoidal chirality, into a polycyclic aromatic structure. Thus, two chiral nanographene layers are covalently connected through a chiral triindane core. The final stereocontrolled graphitization Scholl reaction affords the formation of chiral nanographene units with remarkable enantiomeric excesses, high stereochemical stability and good chiroptical properties.
Docta Complutense
Publication Artículo científico (JournalArticle)

Coronene-Based 2D Networks by On-Surface Skeletal Rearrangement of Sumanene Precursors

  • Pérez-Elvira, Elena
  • Barragán, Ana
  • Gallardo, Aurelio
  • Santos Barahona, José Manuel
  • Martín-Fuentes, Cristina
  • Lauwaet, Koen
  • Gallego, José M.
  • Miranda, Rodolfo
  • Sakurai, Hidehiro
  • Urgel, José I.
  • Björk, Jonas
  • Martín León, Nazario
  • Écija, David
The design of novel low-dimensional carbon materials is at the forefront of modern chemistry. Recently, on-surface covalent synthesis has emerged as a powerful strategy to synthesize previously precluded compounds and polymers. Here, we report a scanning probe microscopy study, complemented by theoretical calculations, on the sequential skeletal rearrangement of sumanene-based precursors into a coronene-based organometallic network by stepwise intra- and inter-molecular reactions on Au(111). Interestingly, upon higher annealing, the formed organometallic networks evolve into two-dimensional coronene-based covalently linked patches through intermolecular homocoupling reactions. A new reaction mechanism is proposed based on the role of C−Au−C motifs to promote two stepwise carbon-carbon couplings to form cyclobutadiene bridges. Our results pave avenues for the conversion of molecular precursors on surfaces, affording the design of unexplored two-dimensional organometallic and covalent materials.
Docta Complutense
Publication Artículo de revisión (ReviewArticle)

Synthetic chiral molecular nanographenes: the key figure of the racemization barrier

  • Fernández García, Jesús Manuel
  • Izquierdo García, Patricia
  • Buendía, Manuel
  • Filippone, Salvatore
  • Martín León, Nazario
Chirality is one of the most intriguing concepts of chemistry, involving living systems and, more recently, materials science. In particular, the bottom-up synthesis of molecular nanographenes endowed with one or several chiral elements is a current challenge for the chemical community. The wilful introduction of defects in the sp2 honeycomb lattice of molecular nanographenes allows the preparation of chiral molecules with tuned band-gaps and chiroptical properties. There are two requirements that a system must fulfill to be chiral: (i) lack of inversion elements (planes or inversion centres) and (ii) to be configurationally stable. The first condition is inherently established by the symmetry group of the structure, however, the limit between conformational and configurational isomers is not totally clear. In this feature article, the chirality and dynamics of synthetic molecular nanographenes, with special emphasis on their racemization barriers and, therefore, the stability of their chiroptical properties are discussed. The general features of nanographenes and their bottom-up synthesis, including the main defects inducing chirality in molecular nanographenes are firstly discussed. In this regard, the most common topological defects of molecular NGs as well as the main techniques used for determining their energy barriers are presented. Then, the manuscript is structured according to the dynamics of molecular nanographenes, classifying them in four main groups, depending on their respective isomerization barriers, as flexible, detectable, isolable and rigid nanographenes. In these sections, the different strategies used to increase the isomerization barrier of chiral molecular nanographenes that lead to configurationally stable nanographenes with defined chiroptical properties are discussed.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A 3D Peptide/[60]Fullerene Hybrid for Multivalent Recognition

  • Gallego Gómez, Iván
  • Ramos Soriano, Javier
  • Méndez Ardoy, Alejandro
  • Cabrera González, Justo
  • Lostalé Seijo, Irene
  • Illescas, Beatriz
  • Reina Martín, José Juan
  • Martín León, Nazario
  • Montenegro García, Javier
Multivalent ligand presentation is a powerful strategy for the development of specific binders and inhibitors. Peptide/[60]fullerene hybrids have now been synthesized that exploit the complete substitution of the fullerene scaffold to afford globular structures presenting twelve copies of a peptide ligand for the recognition of E-selectin. Fully substituted peptide/[60]fullerene hexakis-adducts offer an excellent opportunity for multivalent protein recognition. In contrast to monofunctionalized fullerene hybrids, peptide/[60]fullerene hexakis-adducts display multiple copies of a peptide in close spatial proximity and in the three dimensions of space. High affinity peptide binders for almost any target can be currently identified by in vitro evolution techniques, often providing synthetically simpler alternatives to natural ligands. However, despite the potential of peptide/[60]fullerene hexakis-adducts, these promising conjugates have not been reported to date. Here we present a synthetic strategy for the construction of 3D multivalent hybrids that are able to bind with high affinity the E-selectin. The here synthesized fully substituted peptide/[60]fullerene hybrids and their multivalent recognition of natural receptors constitute a proof of principle for their future application as functional biocompatible materials
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Pulsed Laser Synthesis of Carbon Nanostructures from Organic Molecular Liquids: Structure, Kinetics and Photophysical Properties

  • Ribeiro-González, Antonio
  • Agudo-Blanco, Carlos
  • Ramírez-Barroso, Sergio
  • Navío, Cristina
  • Bañares, Luis
  • Bresolí-Obach, Roger
  • Nonell, Santi
  • Martín, Nazario
  • García-Fresnadillo, David
The striking one-step bottom-up synthesis of carbon nanoparticles (CNPs) from visible and near infrared (NIR) light transparent air-equilibrated liquid aromatic compounds (benzene, toluene, chlorobenzene, aniline, pyrrole, and thiophene) under unfocused pulsed nanosecond laser irradiation (532/1064 nm) is reported. The formation of CNPs follows zero-order kinetics with an induction period dependent on the reactivity of the organic precursor. Experimental evidence suggests a surface-catalyzed photochemical process involving a partial change in C-atom hybridization from sp2 to sp3, with oxygen-based functional groups passivating the surface of the nanostructures. The presence of additional heteroatoms depends on the structure and composition of the precursor. Contingent on the starting compound, the prepared CNPs can be classified as amorphous carbon nanodots (CNDs) or layered curved-graphene quantum dots (c-GQDs), resembling nano-onion fragments. CNDs are obtained from substituted benzenes or heterocyclic compounds, whereas c-GQDs can be synthesized from benzene. Photophysical characterization of the CNPs shows both wavelength-dependent excitation and emission bands, with constant emission quantum yields in the 1–10% range, and wavelength-dependent emission decays displaying several lifetime components in the range 1–20 ns. Triplet exciton lifetimes longer than 5 µs and wavelength-dependent singlet oxygen production quantum yields in the 10–40% range have been measured., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generating antiaromaticity in polycyclic conjugated hydrocarbons by thermally selective skeletal rearrangements at interfaces

  • Pérez-Elvira, E.
  • Barragán, Ana
  • Chen, Q.
  • Soler-Polo, D.
  • Sánchez-Grande, A.
  • Vicent, D.J.
  • Lauwaet, K.
  • Santos, J.
  • Mutombo, P.
  • Mendieta-Moreno, Jesús I.
  • de la Torre, B.
  • Gallego, José M.
  • Miranda, R.
  • Martín, N.
  • Jelínek, P.
  • Urgel, J.I.
  • Écija, David
Antiaromatic polycyclic conjugated hydrocarbons (PCHs) are attractive research targets because of their interesting structural, electronic and magnetic properties. Unlike aromatic compounds, the synthesis of antiaromatic PCHs is challenging because of their high reactivity and lack of stability, which stems from the small energy gap between their highest occupied and lowest unoccupied molecular orbitals. Here we describe a strategy for the introduction of antiaromatic units in PCHs via thermally selective intra- and intermolecular ring-rearrangement reactions of dibromomethylene-functionalized molecular precursors upon sublimation on a hot Au(111) metal surface, not available in solution chemistry. The synthetic value of these reactions is proven by the integration of pentalene segments into acene-based precursors, which undergo intramolecular ring rearrangement, and the formation of π-conjugated ladder polymers, linked through cyclobutadiene connections, due to ring-rearrangement and homocoupling reactions of indenofluorene-based precursors. The reaction products are investigated by scanning tunnelling microscopy and non-contact atomic force microscopy, and mechanistic insights are unveiled by computational studies. [Figure not available: see fulltext.] © 2023, The Author(s), under exclusive licence to Springer Nature Limited., This project has received funding from Comunidad de Madrid (projects QUIMTRONIC-CM (Y2018/NMT-4783) and NanoMagCost (P2018/NMT-4321)), an ERC Consolidator Grant (ELECNANO, 766555), ERC (SyG TOMATTO ERC-2020-951224) and Ministerio de Ciencia, Innovacion y Universidades (projects SpOrQuMat (PGC2018-098613-B-C21), CTQ2017-83531-R, PID2019-108532GB-I00, PID2020-114653RB-I00 and CTQ2016-81911-REDT). We acknowledge the support from the ‘(MAD2D-CM)-UCM’ and the ‘(MAD2D-CM)-IMDEA-Nanociencia’ projects funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanociencia is appreciative of support from the ‘Severo Ochoa’ Programme for Centers of Excellence in R&D (MINECO, grant nos. SEV-2016-0686 and CEX2020-001039-S). Q.C., D.S.-P. and P.J. acknowledge funding support from the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2023051) and GACR project no. 20-13692X. Computational resources were provided by the e-INFRA CZ project (ID 90140), supported by the Ministry of Education, Youth and Sports of the Czech Republic. A.S.-G. acknowledges funding from the ‘Ministerio de Universidades’ for the ‘Plan de Recuperación, Transformación y Resiliencia’ under Margarita Salas grant agreement CA1/RSUE/2021-00369. J.I.U. acknowledges the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 886314. We acknowledge B. Cirera for fruitful discussions., The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request. The Fireball software package is available 458 at: https://github.com/fireball-QMD and PP-SPM software package can be downloaded at: https://github.com/Probe-Particle/ppafm#probe-particle-model., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomically precise control of topological state hybridization in conjugated polymers

  • Jiménez-Martín, Alejandro
  • Sosnová, Zdenka
  • Soler Polo, Diego
  • Mallada, Benjamín
  • González-Herrero, Héctor
  • Edalatmanesh, Shayan
  • Martín, Nazario
  • Écija, David
  • Jelinek, Pavel
  • Torre, Bruno de la
Realization of topological quantum states in carbon nanostructures has recently emerged as a promising platform for hosting highly coherent and controllable quantum dot spin qubits. However, their adjustable manipulation remains elusive. Here, we report the atomically accurate control of the hybridization level of topologically protected quantum edge states emerging from topological interfaces in bottom-up-fabricated π-conjugated polymers. Our investigation employed a combination of low-temperature scanning tunneling microscopy and spectroscopy, along with high-resolution atomic force microscopy, to effectively modify the hybridization level of neighboring edge states by the selective dehydrogenation reaction of molecular units in a pentacene-based polymer and demonstrate their reversible character. Density functional theory, tight binding, and complete active space calculations for the Hubbard model were employed to support our findings, revealing that the extent of orbital overlap between the topological edge states can be finely tuned based on the geometry and electronic bandgap of the interconnecting region. These results demonstrate the utility of topological edge states as components for designing complex quantum arrangements for advanced electronic devices., We acknowledge the Research Infrastructure NanoEnviCz, supported by the Ministry of Education, Youth and Sports of the Czech Republic under Project No. LM2023066. B.T. acknowledges the financial support of Czech Science Foundation (project-23-06781M) and from MCIN/AEI/10.13039/501100011033/ERDF/EU (project-PID2022-140845OB-C64). We appreciate funding from the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) and project GACR no. 23-05486S. We acknowledge the support from the ‘(MAD2D-CM)-IMDEA-Nanociencia’ project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. N.M. acknowledges MICIN of Spain for funding the project PID2020-114653RB-I00. H.G.-H. acknowledges financial support from the Spanish State Research Agency under grant Ramon y Cajal fellowship RYC2021-031050-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Decoding Framework Dynamics in a Spin Crossover Flexible Metal-Organic Framework

  • Martínez-Martínez, Ana
  • Albalad, Jorge
  • Resines-Urien, Esther
  • Carolina Sañudo, E.
  • Lorenzo Mariano, Antonio
  • Fabelo, Óscar
  • Rodríguez-Velamazán, J. A.
  • Poloni, Roberta
  • Maspoch, Daniel
  • Sánchez Costa, José
Functional spin crossover (SCO) metal-organic frameworks (MOFs) hold promise for miniaturized spin-based devices due to their tuneable molecule-based properties near room temperature. SCO describes the phenomenon where transition metal ions switch between high spin (HS) and low spin (LS) states upon external stimuli. However, even simple guest molecules like water can significantly alter the properties of these materials. Understanding the interplay between SCO and these molecules is therefore crucial. This work investigates this interplay in a fascinating 3D Fe(II) SCO-MOF, recently reported to exhibit reversible conductivity even in bulk. A combined experimental and computational approach is employed to explore how guest molecule uptake/release influences SCO dynamics including a transition from partial HS/LS to a fully LS state at high temperatures, (named reverse SCO) and ligand disorder-order behavior. The findings reveal a solid-state mechanism that differs from those previously described., JSC thanks funds from the Spanish MICINN through National Research Project (PID2020114653RB-I00 and TED2021-131018B-C22) and the MAD2D-CMMRR MATERIALES AVANZADOS-IMDEANC-4. AM-M thanks funds from the Spanish MICINN through PRE2019-C-87849. IMDEA Nanociencia and ICN2 acknowledge support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant CEX2020-001039-S and CEX2021-001214-S). ECS ackowledges financial support from the Spanish Governement, Ministerio de Ciencia e Innovación projects Generación del Conocimiento PGC2018-098630-B-I00 and PID2022-137764OB-I00. The authors thank the XALOC-ALBA synchrotron source under project 2023017235. DM ackowledges financial support from the Catalan AGAUR (project 2021 SGR 00458). We thank the Institut Laue-Langevin for the use of the X-ray diffraction facilities. Calculations were performed using resources granted by GENCI under the CINES and TGCC gran number AD010907211R2. Part of the computations presented in this paper were performed using the GRICAD infrastructure (https://gricad.univ-grenoble-alpes.fr), which is supported by Grenoble research communities., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2020-001039-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Pulsed Laser Synthesis of Carbon Nanostructures from Organic Molecular Liquids: Structure, Kinetics and Photophysical Properties

  • Ribeiro-González, Antonio
  • Agudo-Blanco, Carlos
  • Ramírez-Barroso, Sergio
  • Navío, Cristina
  • Bañares, Luis
  • Bresolí-Obach, Roger
  • Nonell, Santi
  • Martín, Nazario
  • García-Fresnadillo, David
The striking one-step bottom-up synthesis of carbon nanoparticles (CNPs) from visible and near infrared (NIR) light transparent air-equilibrated liquid aromatic compounds (benzene, toluene, chlorobenzene, aniline, pyrrole, and thiophene) under unfocused pulsed nanosecond laser irradiation (532/1064 nm) is reported. The formation of CNPs follows zero-order kinetics with an induction period dependent on the reactivity of the organic precursor. Experimental evidence suggests a surface-catalyzed photochemical process involving a partial change in C-atom hybridization from sp2 to sp3, with oxygen-based functional groups passivating the surface of the nanostructures. The presence of additional heteroatoms depends on the structure and composition of the precursor. Contingent on the starting compound, the prepared CNPs can be classified as amorphous carbon nanodots (CNDs) or layered curved-graphene quantum dots (c-GQDs), resembling nano-onion fragments. CNDs are obtained from substituted benzenes or heterocyclic compounds, whereas c-GQDs can be synthesized from benzene. Photophysical characterization of the CNPs shows both wavelength-dependent excitation and emission bands, with constant emission quantum yields in the 1–10% range, and wavelength-dependent emission decays displaying several lifetime components in the range 1–20 ns. Triplet exciton lifetimes longer than 5 µs and wavelength-dependent singlet oxygen production quantum yields in the 10–40% range have been measured., info:eu-repo/semantics/publishedVersion
Docta Complutense
Publication Artículo científico (JournalArticle)

Hybrid Steroid‐[60]Fullerene as n‐Type Material for Organic Photovoltaics

  • Lemos García, Reinier
  • Perez Badell, Yoana
  • Ortiz, Orlando
  • Almagro, Luis
  • Rodríguez Cabrera, Hortensia
  • Herranz Astudillo, María Ángeles
  • Margarita Suarez Navarro, Margarita
  • Martín León, Nazario
Fullerene derivatives have been used as electron acceptor and transport materials in organic photovoltaics as well as in perovskite solar cells. Among them, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) has been one of the most widely used, in combination with poly-3-hexylthiophene (P3HT) as an electron donor semiconducting polymer, for the fabrication of organic bulk heterojunction solar cells (BHJ-OSC). In this work, a steroid-fullerene hybrid was synthesized through the Bingel–Hirsch reaction to compare its properties with PC61BM as the reference structure. Different spectroscopic techniques were employed to characterize the new fullerene derivative, namely 1D and 2D nuclear magnetic resonance (NMR), Fourier Transform Infrared Spectroscopy (FTIR), and high-resolution mass spectrometry (HRMS). In addition, thermogravimetric analysis (TGA), and cyclic voltammetry were also performed. The characterization was completed by transmission electron microscopy (TEM), which explore the hybrid‘s morphology, where the presence of the steroid moiety increases the solubility of the fullerene material. DFT/PBE−D3(BJ)/6-311G(d,p) calculations for both the steroid-fullerene hybrid and PC61BM allowed to obtain geometry optimizations and electronic structure data. A comparative study to analyze the nature of the electronic properties of the synthesized steroid-[60]fullerene hybrid and PC61BM with an oligomer of ten thiophene units, used in the active layer of organic solar cells, was carried out. Electron density maps using the [CIS|CNDOL/21] approach illustrate the photoexcitation of the donor followed by an electron-charge transfer to the acceptor fullerene.
Docta Complutense
Publication Artículo científico (JournalArticle)

Safety assessment of new nanodiamonds@corrole hybrids addressed by the response of RAW-264.7 macrophages

  • Santos, Carla I. M.
  • Cicuéndez Maroto, Mónica
  • Gonçalves, Gil
  • Rodríguez Pérez, Laura
  • Portolés Pérez, María Teresa
  • Faustino, M. Amparo F.
  • Herranz Astudillo, María Ángeles
  • Neves, M. Graça P. M. S.
  • Martinho, José M. G.
  • Maçoas, Ermelinda M. S.
  • Martín León, Nazario
Safety assessment of carbon nanomaterials is of paramount importance since they are on the frontline for applications in sensing, bioimaging and drug delivery. The biocompatibility and safety of functionalized nanodiamonds (NDs) are here addressed through the study of the pro-inflammatory response of RAW-264.7 macrophages exposed to new nanodiamonds@corrole hybrids. The corrole unit selected is as a prototype for a hydrophobic organic molecule that can function as a NIR fluorophore reporter, an optical sensor, a photodynamic therapy agent or a photocatalyst. The new functional nanohybrids containing detonated nanodiamonds (NDs) were obtained through esterification using carboxylated NDs and glycol corroles. The success of the covalent functionalization via carbodiimide activation was confirmed through X-ray photoelectron spectroscopy (XPS), Raman and Fourier transform infrared (FTIR) spectroscopy. The UV-vis absorption and emission spectra of the hybrids are additive with respect to the corrole features. The cellular uptake, localization, cell viability and effects on immune cell activation of the new hybrids and of the precursors were carefully investigated using RAW-264.7 macrophages. Overall results showed that the ND@corrole hybrids had no pro-inflammatory effects on the RAW-264.7 macrophage cell line, making them an ideal candidate for a wide range of biomedical applications.
Docta Complutense
Publication Artículo científico (JournalArticle)

Nanotube-Like Electronic States in [5,5]-C90 Fullertube Molecules

  • Jover, Óscar
  • Martín Jiménez, Alberto
  • Franklin, Hannah M.
  • Koenig, Ryan M.
  • Martínez, José I.
  • Martín León, Nazario
  • Lauwaet, Koen
  • Miranda, Rodolfo
  • Gallego, José M.
  • Stevenson, Steven
  • Otero, Roberto
Fullertubes, that is, fullerenes consisting of a carbon nanotube moiety capped by hemifullerene ends, are emerging carbon nanomaterials whose properties show both fullerene and carbon nanotube (CNT) traits. Albeit it may be expected that their electronic states show a certain resemblance to those of the extended nanotube, such a correlation has not yet been found or described. Here it shows a scanning tunneling microscopy (STM) and spectroscopy (STS) characterization of the adsorption, self-assembly, and electronic structure of 2D arrays of [5,5]-C90 fullertube molecules on two different noble metal surfaces, Ag(111) and Au(111). The results demonstrate that the shape of the molecular orbitals of the adsorbed fullertubes corresponds closely to those expected for isolated species on the grounds of density functional theory calculations. Moreover, a comparison between the electronic density profiles in the bands of the extended [5,5]-CNT and in the molecules reveals that some of the frontier orbitals of the fullertube molecules can be described as the result of the quantum confinement imposed by the hemifullerene caps to the delocalized band states in the extended CNT. The results thus provide a conceptual framework for the rational design of custom fullertube molecules and can potentially become a cornerstone in the understanding of these new carbon nanoforms.
Docta Complutense
Publication Artículo científico (JournalArticle)

Enantiomerically pure helical bilayer nanographenes: a straightforward chemical approach

  • Izquierdo García, Patricia
  • Fernández García, Jesús Manuel
  • Perles, Josefina
  • Martín León, Nazario
The semiconductor properties of nanosized graphene fragments, known as molecular nanographenes, position them as exceptional candidates for next-generation optoelectronics. In addition to their remarkable optical and electronic features, chiral nanographenes exhibit high dissymmetry factors in circular dichroism and circularly polarized luminescence measurements. However, the synthesis of enantiomerically pure nanographenes remains a significant challenge. Typically, these materials are synthesized in their racemic form, followed by separation of the enantiomers using high-performance liquid chromatography (HPLC). While effective, this method often requires expensive instrumentation, extensive optimization of separation conditions, and typically yields analytical quantities of the desired samples. An alternative approach is the enantioselective synthesis of chiral molecular nanographenes; however, to date, only two examples have been documented in the literature. In this work, we present a straightforward chemical method for the chiral resolution of helical bilayer nanographenes. This approach enables the effective and scalable preparation of enantiomerically pure nanographenes while avoiding the need for HPLC. The incorporation of a BINOL core into the polyarene precursor facilitates the separation of diastereomers through esterification with enantiomerically pure camphorsulfonyl chloride. Following the separation of the diastereomers by standard chromatographic column, the hydrolysis of the camphorsulfonyl group yields enantiomerically pure nanographene precursors. The subsequent graphitization, achieved through the Scholl reaction, occurs in an enantiospecific manner and with the concomitant formation of a furan ring and a heterohelicene moiety. The absolute configurations of the final enantiomers, P-oxa[9]HBNG and M-oxa[9]HBNG, have been determined using X-ray diffraction. Additionally, electrochemical, photophysical, and chiroptical properties have been thoroughly evaluated.
Docta Complutense
Publication Artículo científico (JournalArticle)

Synthesis of zwitterionic open-shell bilayer spironanographenes

  • Lión Villar, Juan
  • Fernández García, Jesús Manuel
  • Medina Rivero, Samara
  • Perles, Josefina
  • Wu, Shaofei
  • Aranda, Daniel
  • Wu, Jishan
  • Seki, Shu
  • Casado, Juan
  • Martín León, Nazario
Molecular nanographenes (NGs) are nanoscale graphene fragments obtained by organic synthetic protocols. Here we report the bottom-up synthesis of two spiro-NGs formed by two substituted hexa-peri-hexabenzocoronenes (HBCs), spiro-NG and F-spiro-NG. The X-ray crystal structure of the deca-tert-butyl-functionalized spiro-NG shows a bilayer disposition of the HBCs in face-to-face contact. By contrast, F-spiro-NG, which features tert-butyl substituents on one HBC unit, and fluorine on the other HBC unit, is an electron donor–acceptor bilayer NG. The structural assembly of the donor and acceptor graphenic layers enables an electron-transfer process that leads to the formation of a zwitterionic open shell, paramagnetic species constituted by a radical cation and a radical anion located in the donor and the acceptor HBCs, respectively. Magnetic and spectroelectrochemical experiments, together with theoretical calculations, support the persistent/dominant charge-separated nature of F-spiro-NG. Furthermore, photoconductivity measurements show a significant increase of the charge carrier mobility in the case of F-spiro-NG (Σμ = 6 cm2 V−1 s−1) compared with spiro-NG.
Docta Complutense
Publication Artículo científico (JournalArticle)

N‐type fullerene‐carbon dots: synthesis and electrochemical and photophysical properties

  • Ferrer‐Ruiz, Andrés
  • Moreno‐Naranjo, Juan Manuel
  • Rodríguez Pérez, Laura
  • Ramírez Barroso, Sergio
  • Martín León, Nazario
  • Herranz Astudillo, María Ángeles
The covalent incorporation of C60 and C70 derivatives of the well-known n-type organic semiconductor PCBM ([6,6]-phenyl-C61-butyric acid methyl ester) onto carbon dots (CD) is described. Morphological and structural characterization reveal combined features of both pristine starting materials (CD and PCBM). Electrochemical investigations evidenced the existence of additional reduction processes to that of CD or PCBM precursors, showing rich electron-acceptor capabilities, with multistep processes in an affordable and narrow electrochemical window (ca. 1.5 V). Electronic communication in the obtained nanoconjugated species were derived from steady-state absorption and emission spectroscopies, which showed bathochromically shifted absorptions and emissions well entering the red region. Finally, the lower fluorescence quantum yield of CD-PCBM nanoconjugates, compared with CD, and the fast decay of the observed emission of CD, support the existence of an electronic communication between both CD and PCBM units in the excited state.