Skip to main content

MATERIALES ORGANICOS OPTOELECTRONICOS PARA LA ENERGIA

CTQ2016-81911-REDT

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Redes Investigación /Redes Excelencia
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACION IMDEA NANOCIENCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy alignment and recombination in perovskite solar cells: weighted influence on the open circuit voltage

  • Gelmetti, Ilario
  • Montcada, Núria F.
  • Pérez Rodríguez, Ana
  • Barrena, Esther
  • Ocal, Carmen
  • García Benito, Inés
  • Molina Ontoria, Agustín
  • Martín, Nazario
  • Vidal Ferran, Anton
  • Palomares, Emilio
In this work, we assess the possible reasons for the differences observed in open circuit voltage (VOC) in mixed cation perovskite solar cells when comparing four different hole transport materials (HTMs), namely TAE‐1, TAE‐3, TAE‐4 and spiro‐OMeTAD. All these HTMs present close chemical and physical properties. Additionally to the evaluation of the HTM influence on recombination, we find that, upon deposition of the organic HTM on top of the perovskite, there is an important change in the energy levels position, and the impact on the device VOC is discussed. We consider that this experimental observation could be general for other organic HTMs and would justify the difficulties for finding molecules and materials that could improve the efficiency of perovskite solar cells overcoming the solar‐to‐energy conversion efficiency of solar cells made using spiro‐OMeTAD as holes selective contact., EP and AVF thank MINECO (projects CTQ2013-47183 and CTQ2017- 89814-P). NM thanks the European Research Council (ERC-320441- Chirallcarbon), the CAM (Y2018/NMT-4783QUIMTRONIC-CM) and the Spanish Ministry of Economy and Competitiveness MINECO (projects CTQ2014-52045-R, CTQ2015-71154-P, CTQ2016-80042-R, CTQ2017-83531-R and CTQ2016-81911-REDT). NM also thanks the Alexander von Humboldt Foundation and the Unidad de Excelencia Severo Ochoa SEV-2016-0686 is acknowledged. EP and AV are also grateful to ICIQ and ICREA for economical support. EB and CO thank the Generalitat de Catalunya 2017 SGR668 and 2017 SGR669, the MINEICO projects MAT2016-77852-C2-1-R (AEI/FEDER, UE), MAT2015-68994-REDC and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496). IG thanks Jesús Jiménez López for the fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A solar transistor and photoferroelectric memory

  • Pérez-Tomás, Amador
  • Lima, Francisco Anderson S.
  • Billon, Quentin
  • Shirley, Ian
  • Catalán, Gustau
  • Lira-Cantú, Mónica
This study presents a new self‐powered electronic transistor concept “the solar transistor.” The transistor effect is enabled by the functional integration of a ferroelectric‐oxide thin film and an organic bulk heterojunction. The organic heterojunction efficiently harvests photon energy and splits photogenerated excitons into free electron and holes, and the ferroelectric film acts as a switchable electron transport layer with tuneable conduction band offsets that depend on its polarization state. This results in the device photoconductivity modulation. All this (i.e., carrier extraction and poling) is achieved with only two sandwiched electrodes and therefore, with the role of the gating electrode being taken by light. The two‐terminal solar‐powered phototransistor (or solaristor) thus has the added advantages of a compact photodiode architecture in addition to the nonvolatile functionality of a ferroelectric memory that is written by voltage and nondestructively read by light., A.P.T. acknowledges Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional under contract ENE2015‐74275‐JIN. All authors acknowledge Prof. Martijn Kemerink (Linköping University) for their valuable comments, Dr. G. Sauthier for the XPS/UPS measurements, S. Amores for the lamella fabrication, and Dr. B. Ballesteros for the TEM inspection. The ICN2 is funded by the CERCA programme / Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV‐2013‐0295), for the grant ENE2016‐79282‐C5‐2‐R and the OrgEnergy Excelence NetworkCTQ2016‐81911‐REDT. To the Agència de Gestió d'Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research groups 2014SGR 1212 and 1216‐F. To the COST Action StableNextSol project MP1307 and to the European Research Council (ERC) Starting Grant, project No. 308023., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacial engineering of metal oxides for highly stable halide perovskite solar cells

  • Mingorance, Alba
  • Xie, Haibing
  • Kim, Hui-Seon
  • Wang, Zaiwei
  • Balsells, Marc
  • Morales-Melgares, Anna
  • Domingo, Neus
  • Kazuteru, Nonomura
  • Tress, Wolfgang
  • Fraxedas, J.
  • Vlachopoulos, Nick
  • Hagfeldt, Anders
  • Lira-Cantú, Mónica
Oxides employed in halide perovskite solar cells (PSCs) have already demonstrated to deliver enhanced stability, low cost, and the ease of fabrication required for the commercialization of the technology. The most stable PSCs configuration, the carbon‐based hole transport layer‐free PSC (HTL‐free PSC), has demonstrated a stability of more than one year of continuous operation partially due to the dual presence of insulating oxide scaffolds and conductive oxides. Despite these advances, the stability of PSCs is still a concern and a strong limiting factor for their industrial implementation. The engineering of oxide interfaces functionalized with molecules (like self‐assembly monolayers) or polymers results in the passivation of defects (traps), providing numerous advantages such as the elimination of hysteresis and the enhancement of solar cell efficiency. But most important is the beneficial effect of interfacial engineering on the lifetime and stability of PSCs. In this work, the authors provide a brief insight into the recent developments reported on the surface functionalization of oxide interfaces in PSCs with emphasis on the effect of device stability. This paper also discusses the different binding modes, their effect on defect passivation, band alignment or dipole formation, and how these parameters influence device lifetime., This work was carried out under the Materials Science Ph.D. Degree for A.M. of the Universitat Autònoma de Barcelona. H.‐S.K. is grateful for the postdoctoral fellowship grant (NRF‐2016R1A6A3A03012393), to the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through the Severo Ochoa Centers of Excellence Programme under Grant No. SEV‐2013‐0295, Grant No. ENE2016‐79282‐C5‐2‐R, and the OrgEnergy Excellence Network CTQ2016‐81911‐REDT. To the Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia Research Group 2017 SGR‐329 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae), and to the Centres de Recerca de Catalunya (CERCA) Programme/Generalitat de Catalunya and the European COST Action StableNextSol project MP1307., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PbZrTiO3 ferroelectric oxide as an electron extraction material for stable halide perovskite solar cells

  • Pérez-Tomás, Amador
  • Xie, Haibing
  • Wang, Zaiwei
  • Kim, Hui-Seon
  • Shirley, Ian
  • Turren-Cruz, Silver-Hamill
  • Morales-Melgares, Anna
  • Saliba, Benedicte
  • Tanenbaum, David M.
  • Saliba, Michael
  • Zakeeruddin, Shaik Mohammed
  • Grätzel, Michael
  • Lira-Cantú, Mónica
State-of-the-art halide perovskite solar cells employ semiconductor oxides as electron transport materials. Defects in these oxides, such as oxygen vacancies (Ovac), act as recombination centres and, in air and UV light, reduce the stability of the solar cell. Under the same conditions, the PbZrTiO3 ferroelectric oxide employs Ovac for the creation of defect-dipoles responsible for photo-carrier separation and current transport, evading device degradation. We report the application of PbZrTiO3 as the electron extraction material in triple cation halide perovskite solar cells. The application of a bias voltage (poling) up to 2 V, under UV light, is a critical step to induce charge transport in the ferroelectric oxide. Champion cells result in power conversion efficiencies of ∼11% after poling. Stability analysis, carried out at 1-sun AM 1.5 G, including UV light in air for unencapsulated devices, shows negligible degradation for hours. Our experiments indicate the effect of ferroelectricity, however alternative conducting mechanisms affected by the accumulation of charges or the migration of ions (or the combination of them) cannot be ruled out. Our results demonstrate, for the first time, the application of a ferroelectric oxide as an electron extraction material in efficient and stable PSCs. These findings are also a step forward in the development of next generation ferroelectric oxide-based electronic and optoelectronic devices., M. G. and S. M. Z. thank the European Union's Horizon 2020 programme, through a FET Open research and innovation action under grant agreement No. 687008 and the King Abdulaziz City for Science and Technology (KACST) for the financial support. H.-S. K. is grateful for the postdoctoral fellowship grant (NRF-2016R1A6A3A03012393). M. S. acknowledges support from the co-funded Marie Skłodowska Curie fellowship, H2020 grant agreement no. 665667. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 and for the postdoctoral contract for H. X.; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence Network CTQ2016-81911-REDT. To the Agència de Gestió d'Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2017 SGR-329 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). To the Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) for the contract ENE2015-74275-JIN to A. P. To the CERCA Programme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water splitting of hydrogen chemisorbed in graphene oxidedynamically evolves into a graphane lattice

  • Ciammaruchi, Laura
  • Bellucci, Luca
  • Comeron Castillo, Gabriel
  • Martínez-Denegri Sanchez, Guillermo
  • Liu, Quan
  • Tozzini, Valentina
  • Martorell, Jordi
Graphane offers a safe and high capacity hydrogen storage. Unfortunately, production of graphane directly from its parent material graphene requires breaking the extended π bond, implying either harsh chemical environments or highly energetic plasmas. In here, we propose to use graphene oxide (GO) to initially have the lattice irregularities and local curvature conferring to some of the carbons a favorable partial negative charge or a sp3 hybridization suitable for C–H bond formation. When GO covers the cathode of a water splitting cell powered at 1.7 V, we demonstrate an effective hydrogen chemisorption exhibiting a logarithmic growth with time. Such GO undergoes a dynamic evolution, combining a continuous change in the local corrugation and partial charge distribution with deoxygenation, opening additional sites for hydrogen chemisorption. Using density functional theory combined with the experimental parameters we can monitor the H atom gravimetric density increase as the water splitting experiment takes place., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

  • Khenkin, Mark V.
  • Katz, Eugene A.
  • Abate, Antonio
  • Bardizza, Giorgio
  • Berry, Joseph J.
  • Brabec, Christoph
  • Brunetti, Francesca
  • Bulović, Vladimir
  • Burlingame, Quinn
  • Di Carlo, Aldo
  • Cheacharoen, Rongrong
  • Cheng, Yi-Bing
  • Colsmann, Alexander
  • Cros, Stephane
  • Domanski, Konrad
  • Dusza, Michal
  • Fell, Christopher J.
  • Forrest, Stephen R.
  • Galagan, Yulia
  • di Girolamo, Diego
  • Grätzel, Michael
  • Hagfeldt, Anders
  • Hauff, Elizabeth von
  • Hoppe, Harald
  • Kettle, Jeff
  • Köbler, Hans
  • Leite, Marina S.
  • Liu, Shengzhong
  • Loo, Yueh-Lin
  • Luther, Joseph M.
  • Ma, Chang-Qi
  • Madsen, Morten
  • Manceau, Matthieu
  • Matheron, Muriel
  • McGehee, Michael
  • Meitzner, Rico
  • Nazeeruddin, Mohammad Khaja
  • Nogueira, Ana Flavia
  • Odabaşi, Çağla
  • Osherov, Anna
  • Park, Nam-Gyu
  • Reese, Matthew O.
  • Rossi, Francesca de
  • Saliba, Michael
  • Schubert, Ulrich S.
  • Snaith, Henry J.
  • Stranks, Samuel D.
  • Tress, Wolfgang
  • Troshin, Pavel
  • Turkovic, Vida
  • Veenstra, Sjoerd
  • Visoly-Fisher, Iris
  • Walsh, Aron
  • Watson, Trystan
  • Xie, Haibing
  • Yıldırım, Yamazan
  • Zakeeruddin, Shaik Mohammed
  • Zhu, Kai
  • Lira-Cantú, Mónica
Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis., This article is based upon work from COST Action StableNextSol MP1307 supported by COST (European Cooperation in Science and Technology). M.V.K., E.A.K., V.B. and A.O. thank the financial support of the United States – Israel Binational Science Foundation (grant no. 2015757). E.A.K., A.A. and I.V.-F. acknowledge partial support from the SNaPSHoTs project in the framework of the German-Israeli bilateral R&D cooperation in the field of applied nanotechnology. M.S.L. thanks the financial support of National Science Foundation (ECCS, award #1610833). S.C., M.Manceau and M.Matheron thank the financial support of European Union’s Horizon 2020 research and innovation programme under grant agreement no 763989 (APOLO project). F.D.R. and T.M.W. would like to acknowledge the support from the Engineering and Physical Sciences Research Council (EPSRC) through the SPECIFIC Innovation and Knowledge Centre (EP/N020863/1) and express their gratitude to the Welsh Government for their support of the Ser Solar programme. P.A.T. acknowledges financial support from the Russian Science Foundation (project No. 19-73-30020). J.K. acknowledges the support by the Solar Photovoltaic Academic Research Consortium II (SPARC II) project, gratefully funded by WEFO. M.K.N. acknowledges financial support from Innosuisse project 25590.1 PFNM-NM, Solaronix, Aubonne, Switzerland. C.-Q.M. would like to acknowledge The Bureau of International Cooperation of Chinese Academy of Sciences for the support of ISOS11 and the Ministry of Science and Technology of China for the financial support (no. 2016YFA0200700). N.G.P. acknowledges financial support from the National Research Foundation of Korea (NRF) grants funded by the Ministry of Science, ICT Future Planning (MSIP) of Korea under contracts NRF-2012M3A6A7054861 and NRF-2014M3A6A7060583 (Global Frontier R&D Program on Center for Multiscale Energy System). CSIRO’s contribution to this work was conducted with funding support from the Australian Renewable Energy Agency (ARENA) through its Advancing Renewables Program. A.F.N gratefully acknowledges support from FAPESP (Grant 2017/11986-5) and Shell and the strategic importance of the support given by ANP (Brazil’s National Oil, Natural Gas and Biofuels Agency) through the R&D levy regulation. Y.-L.L. and Q.B. acknowledge support from the National Science Foundation Division of Civil, Mechanical and Manufacturing Innovation under award no. 1824674. S.D.S. acknowledges the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (HYPERION, grant agreement no. 756962), and the Royal Society and Tata Group (UF150033). The work at the National Renewable Energy Laboratory was supported by the US Department of Energy (DOE) under contract DE-AC36-08GO28308 with Alliance for Sustainable Energy LLC, the manager and operator of the National Renewable Energy Laboratory. The authors (J.J.B, J.M.L., M.O.R, K.Z.) acknowledge support from the ‘De-risking halide perovskite solar cells’ program of the National Center for Photovoltaics, funded by the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Solar Energy Technology Office. The views expressed in the article do not necessarily represent the views of the DOE or the US Government. H.J.S. acknowledges the support of EPSRC UK, Engineering and Physical Sciences Research Council. V.T. and M.Madsen acknowledge ‘Villum Foundation’ for funding of the project CompliantPV, under project no. 13365. M.Madsen acknowledges Danmarks Frie Forskningsfond, DFF FTP for funding of the project React-PV, no. 8022-00389B. M.G. and S.M.Z. thank the King Abdulaziz City for Science and technology (KACST) for financial support. S.V. acknowledges TKI-UE/Ministry of Economic Affairs for financial support of the TKI-UE toeslag project POP-ART (no. 1621103). RC thanks the grants for Development of New Faculty Staff, Ratchadaphiseksomphot Endowment Fund. A.D.C. gratefully acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Program (grant agreement no. 785219-GrapheneCore2 and no. 764047-ESPResSo). M.L.C. and H.X. acknowledges the support from Spanish MINECO for the grant GraPErOs (ENE2016-79282-C5-2-R), the OrgEnergy Excellence Network CTQ2016-81911- REDT, the Agència de Gestiód’Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of the methylammonium ion substitution by 5-ammoniumvaleric acid in lead trihalide perovskite solar cells: a combined experimental and theoretical investigation

  • Urzúa-Leiva, Rodrigo
  • Shandy, Amir Narymany
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Cárdenas-Jirón, Gloria
In the last decade, lead triiodide perovskite (APbI3) (A: organic cation) solar cells (PSCs) have been broadly studied due to their promising features related to the low cost, easy manufacturing process, and stability. Strategies to improve the device stability include the application of techniques such as compositional engineering of the cation of these halide perovskites, but it is still a complex task to find the right balance between the stability and power conversion efficiency of materials and complete devices. In this work, we performed a combined study of five samples of [5-AVA(1−x)MAx]PbI3 (5-AVA: ammonium valeric acid and MA: methylammonium) with x = 1.0, 0.75, 0.5, 0.25 and 0.0, using X-ray diffraction (XRD) and UV-VIS spectroscopy measurements in combination with periodic density functional theory (DFT) based calculations. Our samples showed an optical bandgap of 1.58 eV and the coexistence of the two phases as observed by XRD analyses. The theoretical results of the bandgaps for the no mixed phases (x = 1.0 and x = 0.0) show good agreement with the experiment, obtaining bandgap values overestimated by 0.18 eV and 0.33 eV, respectively. A direct relation between the number of 5-AVA ions in the samples and the stability of the phases was theoretically found and proved through the increment observed in the bandgap and the cohesive energy. We proposed a compositional strategy for perovskites [5-AVA(1−x)MAx]PbI3 with x values of at most 0.5, based on the small blue-shift and the low absorbance reduction of the spectrum curve, added to the small phase stabilization found., We are thankful for the financial support from USACH under the Project POSTDOC_DICYT, Código 021941CJ_POSTDOC (R. U.-L. and G. C.-J.) Powered@NLHPC. This research was partially supported by the supercomputing infrastructure of the NLHPC (ECM-02) of the Universidad de Chile. M. L. C. and H. X. acknowledge the support from Spanish MINECO for grants ENE2016-79282-C5-2-R and PID2019-104272RB-C54, the OrgEnergy Excellence Network CTQ2016-81911-REDT, the Agència de Gestiód'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hierarchical carbon nanofibers/carbon nanotubes/NiCo nanocomposites as novel highly effective counter electrode for dye-sensitized solar cells: A structure-electrocatalytic activity relationship study

  • Zambrzycki, Marcel
  • Piech, Robert
  • Raga, Sonia R.
  • Lira-Cantú, Mónica
  • Fraczek-Szczypta, Aneta
Herein, we propose novel, highly effective Pt-free counter electrode (CE) material for dye-sensitized solar cells (DSSC) based on the hierarchical carbon nanofibers/carbon nanotubes/NiCo (eCNF/CNT/NiCoNP) ternary nanocomposites. The materials were obtained by combining the electrospinning technique and CCVD synthesis of carbon nanotubes directly on the surface of eCNF. By using various conditions of the CNT growth, it was possible to obtain series of nanocomposites differing with their morphology, surface chemistry, and structural ordering. The conducted studies unraveled significant correlations between the disordering of the nanocomposites, and their electrocatalytic activity towards reduction of I3−. The investigation methods included i.a. SEM, TEM, XPS, UPS, EDS, XRD, SAED, CV, EIS and J-V characterizations. The counter electrodes based on the nanocomposite synthetized at the lowest CCVD temperature of 700 °C exhibited remarkable catalytical activity as evidenced by very low charge transfer resistance of 0.93 Ω cm2. Based on the obtained data, we propose new, alternative interpretation of the additional minor arc appearing at the high-frequency region of EIS Nyquist spectra of carbon based-CE. The DSSC with eCNF/CNT/NiCoNP-electrodes were characterized by efficiencies up to 7.08% (avg. η = 6.95%), which was higher than for Pt-based devices (avg. η = 6.80%), thus demonstrating excellent performance of prepared CE. Our results confirm that the eCNF/CNT/NiCoNP nanocomposite material is a promising low-cost CE alternative for DSSC., This study has been supported by the National Science Center, Poland, project no. UMO-2019/33/N/ST5/02500., We thank ‘La Caixa’ for the Jr leader grant awarded to S.R. To the Spanish State Research Agency for the grant Self-Power (PID2019-104272RB-C54/AEI/10.13039/501100011033) and the OrgEnergy Excelence Network (CTQ2016-81911- REDT), and to the Agencia de Gestio d’Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa d’R + D + I Energy for Society (XRE4S). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalized MXene/halide perovskite heterojunctions for perovskite solar cells Stable under real outdoor conditions

  • Karimipour, Masoud
  • Paingott Parambil, Ashitha
  • Tabah, Kenedy
  • Zhang, Tiankai
  • Gao, Feng
  • Lira-Cantú, Mónica
Despite the performance improvement in perovskite solar cells (PSCs) when MXenes are employed as transport layers, device stability studies are still missing. Especially under real outdoor conditions where devices are subjected to the synergy of multiple stressors. In this work, functionalized 2D titanium carbide (Ti3C2) MXene is employed in normal PSC configuration, at the interface between the halide perovskite and the hole transport layer. The functionalization of the Ti3C2 MXene is made utilizing the same organic additive passivating the halide perovskite layer. The functionalizing strategy creates a continuous link between the MXene and the halide perovskite layer. Champion MXene-based PSCs revealed a ≈22% efficiency, in comparison with the control device showing 20.56%. Stability analyses under ISOS protocols under different conditions (dark, continuous light irradiation and real outdoor analysis) reveal that the enhancement of the PSCs lifespan is always observed when the MXene layer is employed. Analysis under continuous light irradaition (ISOS-L) reveal an almost 100% retention of the efficiency for the MXene-modified device, and outdoor testing (ISOS-O) carried out for > 600 h reveals a T80 of ≈600 h, while the control device degrades completely. To the best of the authors' knowledge, this is the first report of the stability assesment of MXene-based PSCs carried out under real outdoor (ISOS-O) conditions., The authors give thanks to the Spanish State Research Agency for the grant Self-Power (PDI2022-143344OB-100 / AEI / 10.13039/501100011033). This work was part of the project PCI2020-112185, granted by MCIN/AEI/ 10.13039/501100011033 project and the European Union “NextGenerationEU”/PRTR. To the OrgEnergy Excelence Network (CTQ2016-81911- REDT), to the Agencia de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2021 SGR 01617 and the Xarxa d'R+D+I Energy for Society (XRE4S). Part of this work was under Materials Science Ph.D. Degree for A.P. and K.T. of the Universitat Autonoma de Barcelona (UAB, Spain). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors thank the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under grant no. SEV-2017-0706 for the postdoctoral contract to M.K. F.G. would like also to thank the supporting fund from the Swedish Energy Agency (P2022-00756)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On performance of thin-film meso-structured perovskite solar cell through experimental analysis and device simulation

  • Bonnín-Ripoll, Francesc
  • Martynov, Y. B.
  • Nazmitdinov, Rashid G.
  • Tabah, Kenedy
  • Pereyra, Carlos
  • Lira-Cantú, Mónica
  • Cardona, Gabriel
  • Pujol Nadal, Ramon
In the last few years, there has been an unprecedented progress in the increase of the power conversion efficiency of perovskite solar cells. Evidently, further advances in the efficiency of these devices will depend on the constraints imposed by the optical and electronic properties of their constituents. Quite apparently during the manufacturing process of a solar cell, there is an inevitable variation in the thicknesses of various functional layers, which affects the optoelectronic characteristics of the final sample. In this work, a possible strategy of the analysis of the solar cell performance is suggested, based on statistically averaging procedure of experimental data. We present a case study, in which the optoelectronic properties of the meso-structured perovskite solar cell (with a mesoporous TiO2 layer) are analyzed within the method providing a deeper understanding of the device operation. This method enables an assessment of the overall quality of the device, pointing pathways towards the maximum efficiency design of a perovskite solar cell by material properties tuning., This work is part of the project TED2021-132758B-I00, funded by MCIN/AEI/10.13039/501100011033/ and the European Union “Next Generation EU”/PRTR. It has also been co-funded by the predoctoral contracts call of the Vice-presidency and Innovation, Research and Tourism Department of the Government of the Balearic Islands and the European Social Fund (ESF) [Grant no FPI/2144/2018]. Part of this work is under Physics Ph.D. programme for F. Bonnín-Ripoll of the Universitat de les Illes Balears (UIB, Spain). We thank Dr José F. González Morey (Serveis Cientificotècnics, UIB) for his technical assistance. This work is partially supported by the Russian Science Foundation (grant no. 23-19-00884). We thank the Spanish State Research Agency for the grant Self-Power (PID2019-104272RB-C54/AEI/10.13039/501100011033), the ProperPhotoMile Project (PCI2020-112185) and the OrgEnergy Excelence Network (CTQ2016-81911-REDT), and to the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2021 SGR 01617 and the Xarxa d’R+D+I Energy for Society (XRE4S). Part of this work is under Materials Science Ph.D. Degree for K.T. and the Chemistry Ph.D. programme for C.P. of the Universitat Autònoma de Barcelona (UAB, Spain). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generating antiaromaticity in polycyclic conjugated hydrocarbons by thermally selective skeletal rearrangements at interfaces

  • Pérez-Elvira, E.
  • Barragán, Ana
  • Chen, Q.
  • Soler-Polo, D.
  • Sánchez-Grande, A.
  • Vicent, D.J.
  • Lauwaet, K.
  • Santos, J.
  • Mutombo, P.
  • Mendieta-Moreno, Jesús I.
  • de la Torre, B.
  • Gallego, José M.
  • Miranda, R.
  • Martín, N.
  • Jelínek, P.
  • Urgel, J.I.
  • Écija, David
Antiaromatic polycyclic conjugated hydrocarbons (PCHs) are attractive research targets because of their interesting structural, electronic and magnetic properties. Unlike aromatic compounds, the synthesis of antiaromatic PCHs is challenging because of their high reactivity and lack of stability, which stems from the small energy gap between their highest occupied and lowest unoccupied molecular orbitals. Here we describe a strategy for the introduction of antiaromatic units in PCHs via thermally selective intra- and intermolecular ring-rearrangement reactions of dibromomethylene-functionalized molecular precursors upon sublimation on a hot Au(111) metal surface, not available in solution chemistry. The synthetic value of these reactions is proven by the integration of pentalene segments into acene-based precursors, which undergo intramolecular ring rearrangement, and the formation of π-conjugated ladder polymers, linked through cyclobutadiene connections, due to ring-rearrangement and homocoupling reactions of indenofluorene-based precursors. The reaction products are investigated by scanning tunnelling microscopy and non-contact atomic force microscopy, and mechanistic insights are unveiled by computational studies. [Figure not available: see fulltext.] © 2023, The Author(s), under exclusive licence to Springer Nature Limited., This project has received funding from Comunidad de Madrid (projects QUIMTRONIC-CM (Y2018/NMT-4783) and NanoMagCost (P2018/NMT-4321)), an ERC Consolidator Grant (ELECNANO, 766555), ERC (SyG TOMATTO ERC-2020-951224) and Ministerio de Ciencia, Innovacion y Universidades (projects SpOrQuMat (PGC2018-098613-B-C21), CTQ2017-83531-R, PID2019-108532GB-I00, PID2020-114653RB-I00 and CTQ2016-81911-REDT). We acknowledge the support from the ‘(MAD2D-CM)-UCM’ and the ‘(MAD2D-CM)-IMDEA-Nanociencia’ projects funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanociencia is appreciative of support from the ‘Severo Ochoa’ Programme for Centers of Excellence in R&D (MINECO, grant nos. SEV-2016-0686 and CEX2020-001039-S). Q.C., D.S.-P. and P.J. acknowledge funding support from the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2023051) and GACR project no. 20-13692X. Computational resources were provided by the e-INFRA CZ project (ID 90140), supported by the Ministry of Education, Youth and Sports of the Czech Republic. A.S.-G. acknowledges funding from the ‘Ministerio de Universidades’ for the ‘Plan de Recuperación, Transformación y Resiliencia’ under Margarita Salas grant agreement CA1/RSUE/2021-00369. J.I.U. acknowledges the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 886314. We acknowledge B. Cirera for fruitful discussions., The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request. The Fireball software package is available 458 at: https://github.com/fireball-QMD and PP-SPM software package can be downloaded at: https://github.com/Probe-Particle/ppafm#probe-particle-model., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

PbZrTiO3 ferroelectric oxide as an electron extraction material for stable halide perovskite solar cells

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Xie, Haibing|||0000-0002-5070-2882
  • Wang, Zaiwei
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Shirley, Ian
  • Turren-Cruz, Silver-Hamill|||0000-0003-3191-6188
  • Morales Melgares, Anna
  • Saliba, Benedicte
  • Tanenbaum, David M.|||0000-0002-6070-8882
  • Saliba, Michael|||0000-0002-6818-9781
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
State-of-the-art halide perovskite solar cells employ semiconductor oxides as electron transport materials. Defects in these oxides, such as oxygen vacancies (O ), act as recombination centres and, in air and UV light, reduce the stability of the solar cell. Under the same conditions, the PbZrTiO ferroelectric oxide employs O for the creation of defect-dipoles responsible for photo-carrier separation and current transport, evading device degradation. We report the application of PbZrTiO as the electron extraction material in triple cation halide perovskite solar cells. The application of a bias voltage (poling) up to 2 V, under UV light, is a critical step to induce charge transport in the ferroelectric oxide. Champion cells result in power conversion efficiencies of ∼11% after poling. Stability analysis, carried out at 1-sun AM 1.5 G, including UV light in air for unencapsulated devices, shows negligible degradation for hours. Our experiments indicate the effect of ferroelectricity, however alternative conducting mechanisms affected by the accumulation of charges or the migration of ions (or the combination of them) cannot be ruled out. Our results demonstrate, for the first time, the application of a ferroelectric oxide as an electron extraction material in efficient and stable PSCs. These findings are also a step forward in the development of next generation ferroelectric oxide-based electronic and optoelectronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of cs-incorporated NiOx on the performance of perovskite solar cells

  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Seo, Ji-Youn
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
The effect of Cs-incorporated NiO on perovskite solar cells with an inverted structure was investigated, where NiO and PCBM were used as selective contacts for holes and electrons, respectively. It was found that the generation of an Ni phase in an NiO layer was significantly suppressed by employing cesium. Furthermore, Cs-incorporated NiO enabled holes to be efficiently separated at the interface, showing the improved photoluminescent quenching and thus generating higher short-circuit current. The effect of Cs incorporation was also prominent in the inhibition of recombination. The recombination resistance of Cs-incorporated NiO was noticeably increased by more than three-fold near the maximum power point leading to a higher fill factor of 0.78 and consequently a higher power conversion efficiency of 17.2% for the device employing Cs-incorporated NiO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A solar transistor and photoferroelectric memory

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Lima, F. Anderson S.
  • Billon, Quentin
  • Shirley, Ian
  • Catalan, Gustau|||0000-0003-0214-4828
  • Lira-Cantu, Monica|||0000-0002-3393-7436
This study presents a new self-powered electronic transistor concept "the solar transistor." The transistor effect is enabled by the functional integration of a ferroelectric-oxide thin film and an organic bulk heterojunction. The organic heterojunction efficiently harvests photon energy and splits photogenerated excitons into free electron and holes, and the ferroelectric film acts as a switchable electron transport layer with tuneable conduction band offsets that depend on its polarization state. This results in the device photoconductivity modulation. All this (i.e., carrier extraction and poling) is achieved with only two sandwiched electrodes and therefore, with the role of the gating electrode being taken by light. The two-terminal solar-powered phototransistor (or solaristor) thus has the added advantages of a compact photodiode architecture in addition to the nonvolatile functionality of a ferroelectric memory that is written by voltage and nondestructively read by light.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effects of the methylammonium ion substitution by 5-ammoniumvaleric acid in lead trihalide perovskite solar cells, a combined experimental and theoretical investigation

  • Urzua-Leiva, Rodrigo|||0000-0002-6953-2721
  • Shandy, Amir Narymany
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Cardenas-Jiron, Gloria|||0000-0003-4305-8088
In the last decade, lead triiodide perovskite (APbI₃) (A: organic cation) solar cells (PSCs) have been broadly studied due to their promising features related to the low cost, easy manufacturing process, and stability. Strategies to improve the device stability include the application of techniques such as compositional engineering of the cation of these halide perovskites, but it is still a complex task to find the right balance between the stability and power conversion efficiency of materials and complete devices. In this work, we performed a combined study of five samples of [5-AVA(1-x) MAx] PbI₃ (5-AVA: ammonium valeric acid and MA: methylammonium) withx= 1.0, 0.75, 0.5, 0.25 and 0.0, using X-ray diffraction (XRD) and UV-VIS spectroscopy measurements in combination with periodic density functional theory (DFT) based calculations. Our samples showed an optical bandgap of 1.58 eV and the coexistence of the two phases as observed by XRD analyses. The theoretical results of the bandgaps for the no mixed phases (x= 1.0 andx= 0.0) show good agreement with the experiment, obtaining bandgap values overestimated by 0.18 eV and 0.33 eV, respectively. A direct relation between the number of 5-AVA ions in the samples and the stability of the phases was theoretically found and proved through the increment observed in the bandgap and the cohesive energy. We proposed a compositional strategy for perovskites [5-AVA(1-x) MAx]PbI₃ with x values of at most 0.5, based on the small blue-shift and the low absorbance reduction of the spectrum curve, added to the small phase stabilization found.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An interlaboratory study on the stability of all-printable hole transport material-free perovskite solar cells

  • De Rossi, Francesca|||0000-0002-6591-5928
  • Barbé, Jérémy
  • Tanenbaum, David M.|||0000-0002-6070-8882
  • Cinà, Lucio|||0000-0003-3508-2475
  • Castriotta, Luigi Angelo|||0000-0003-2525-8852
  • Stoichkov, Vasil
  • Wei, Zhengfei
  • Tsoi, Wing Chung
  • Kettle, Jeffrey
  • Sadula, Artem
  • Chircop, John
  • Azzopardi, Brian
  • Xie, Haibing|||0000-0002-5070-2882
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Watson, Trystan M.|||0000-0002-8015-1436
  • Brunetti, Francesca
Comparisons between different laboratories on long-term stability analyses of perovskite solar cells (PSCs) is still lacking in the literature. This work presents the results of an interlaboratory study conducted between five laboratories from four countries. Carbon-based PSCs are prepared by screen printing, encapsulated, and sent to different laboratories across Europe to assess their stability by the application of three ISOS aging protocols: (a) in the dark (ISOS-D), (b) under simulated sunlight (ISOS-L), and (c) outdoors (ISOS-O). Over 1000 h stability is reported for devices in the dark, both at room temperature and at 65 °C. Under continuous illumination at open circuit, cells survive only for few hours, although they recover after being stored in the dark. Better stability is observed for cells biased at maximum power point under illumination. Finally, devices operate in outdoors for 30 days, with minor degradation, in two different locations (Barcelona, Spain and Paola, Malta). The findings demonstrate that open-circuit conditions are too severe for stability assessment and that the diurnal variation of the photovoltaic parameters reveals performance to be strongly limited by the fill factor, in the central hours of the day, due to the high series resistance of the carbon electrode.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

  • Khenkin, Mark V.|||0000-0001-9201-0238
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Abate, Antonio|||0000-0002-3012-3541
  • Bardizza, Giorgio
  • Berry, Joseph J.|||0000-0003-3874-3582
  • Brabec, Christoph
  • Brunetti, Francesca
  • Bulović, Vladimir
  • Burlingame, Quinn
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Cheacharoen, Rongrong
  • Cheng, Yi-Bing
  • Colsmann, Alexander|||0000-0001-9221-9357
  • Cros, Stephane
  • Domanski, Konrad|||0000-0002-8115-7696
  • Dusza, Michal
  • Fell, Christopher J.|||0000-0003-2517-3445
  • Forrest, Stephen R.
  • Galagan, Yulia|||0000-0002-3637-5459
  • Di Girolamo, Diego
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Von Hauff, Elizabeth
  • Hoppe, Harald
  • Kettle, Jeff
  • Köbler, Hans|||0000-0003-0230-6938
  • Leite, Marina S.
  • Liu, Shengzhong
  • Loo, Yueh-Lin|||0000-0002-4284-0847
  • Luther, Joseph M.|||0000-0002-4054-8244
  • Ma, ChanQi|||0000-0002-9293-5027
  • Madsen, Morten|||0000-0001-6503-0479
  • Manceau, Matthieu
  • Matheron, Muriel|||0000-0002-4100-808X
  • McGehee, Michael|||0000-0001-9609-9030
  • Meitzner, Rico
  • Nazeeruddin, Mohammad Khaja|||0000-0001-5955-4786
  • Nogueira, Ana Flavia|||0000-0002-0838-7962
  • Odabaşı, Çağla|||0000-0003-3552-6371
  • Osherov, Anna
  • Park, Nam-Gyu|||0000-0003-2368-6300
  • Reese, Matthew O.
  • De Rossi, Francesca|||0000-0002-6591-5928
  • Saliba, Michael|||0000-0002-6818-9781
  • Schubert, Ulrich S.
  • Snaith, Henry J.|||0000-0001-8511-790X
  • Stranks, Samuel D.|||0000-0002-8303-7292
  • Tress, Wofgang|||0000-0002-4010-239X
  • Troshin, Pavel A.
  • Turkovic, Vida
  • Veenstra, Sjoerd|||0000-0003-3198-8069
  • Visoly-Fisher, Iris|||0000-0001-6058-4712
  • Walsh, Aron
  • Watson, Trystan M.|||0000-0002-8015-1436
  • Xie, Haibing|||0000-0002-5070-2882
  • Yıldırım, Ramazan|||0000-0001-5077-5689
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Zhu, Kai|||0000-0003-0908-3909
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Stress-mediated solution deposition method to stabilize ferroelectric BiFe1-xCrxO3 perovskite thin films with narrow bandgaps

  • Jiménez-Zavala, Ricardo|||0000-0002-5333-8529
  • Ricote, J.|||0000-0002-2907-2505
  • Bretos, Iñigo
  • Jiménez Riobóo, Rafael J.|||0000-0002-9545-0172
  • Mompean, Federico J.|||0000-0002-6346-1475
  • Ruiz y Ruiz de Gopegui, Ana
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Calzada, M. Lourdes|||0000-0002-2286-653X
Ferroelectric oxides with low bandgaps are mainly based on the BiFeO perovskite upon the partial substitution of iron with different cations. However, the structural stability of many of these perovskites is only possible by their processing at high pressures (HP,.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Interfacial engineering of metal oxides for highly stable halide perovskite solar cells

  • Mingorance, Alba
  • Xie, Haibing|||0000-0002-5070-2882
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Wang, Zaiwei
  • Balsells, Marc|||0000-0001-6475-1514
  • Morales Melgares, Anna
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Kazuteru, Nonomura
  • Tress, Wolfgang
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Vlachopoulos, Nick
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Oxides employed in halide perovskite solar cells (PSCs) have already demonstrated to deliver enhanced stability, low cost, and the ease of fabrication required for the commercialization of the technology. The most stable PSCs configuration, the carbon-based hole transport layer-free PSC (HTL-free PSC), has demonstrated a stability of more than one year of continuous operation partially due to the dual presence of insulating oxide scaffolds and conductive oxides. Despite these advances, the stability of PSCs is still a concern and a strong limiting factor for their industrial implementation. The engineering of oxide interfaces functionalized with molecules (like self-assembly monolayers) or polymers results in the passivation of defects (traps), providing numerous advantages such as the elimination of hysteresis and the enhancement of solar cell efficiency. But most important is the beneficial effect of interfacial engineering on the lifetime and stability of PSCs. In this work, the authors provide a brief insight into the recent developments reported on the surface functionalization of oxide interfaces in PSCs with emphasis on the effect of device stability. This paper also discusses the different binding modes, their effect on defect passivation, band alignment or dipole formation, and how these parameters influence device lifetime.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multi-component engineering to enable long-term operational stability of perovskite solar cells

  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
With a record efficiency above 25%, the main hurdle for the commercialization of perovskite solar cells (PSCs) is their long-term operational stability. Although different strategies have been applied, the stability of PSCs is still far below the 25 year requirement demonstrated by commercial photovoltaic technologies. To advance in the former, a lab-scale stability analysis should resemble real testing conditions, and this is only possible through the interaction of several stress factors. Here, we briefly introduce the reader to the general degradation mechanisms observed on PSCs and the state-of-the-art strategies applied to realize long-term stable devices. Finally, we highlight the imperative need to engineer multiple components of the PSCs simultaneously and propose a rational design of PSC's constituents to obtain long-term operational solar cells. This perspective article will benefit the progression of PSCs as a reliable photovoltaic technology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Additive engineering for stable halide perovskite solar cells

  • Pereyra, Carlos
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Halide perovskite solar cells (PSCs) have already demonstrated power conversion efficiencies above 25%, which makes them one of the most attractive photovoltaic technologies. However, one of the main bottlenecks towards their commercialization is their long-term stability, which should exceed the 20-year mark. Additive engineering is an effective pathway for the enhancement of device lifetime. Additives applied as organic or inorganic compounds, improve crystal grain growth enhancing power conversion efficiency. The interaction of their functional groups with the halide perovskite (HP) absorber, as well as with the transport layers, results in defect passivation and ion immobilization improving device performance and stability. In this review, we briefly summarize the different types of additives recently applied in PSC to enhance not only efficiency but also long-term stability. We discuss the different mechanism behind additive engineering and the role of the functional groups of these additives for defect passivation. Special emphasis is given to their effect on the stability of PSCs under environmental conditions such as humidity, atmosphere, light irradiation (UV, visible) or heat, taking into account the recently reported ISOS protocols. We also discuss the relation between deep-defect passivation, non-radiative recombination and device efficiency, as well as the possible relation between shallow-defect passivation, ion immobilization and device operational stability. Finally, insights into the challenge and criteria for additive selection are provided for the further stability enhancement of PSCs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Decoupling the effects of defects on efficiency and stability through phosphonates in stable halide perovskite solar cells

  • Xie, Haibing|||0000-0002-5070-2882
  • Wang, Zaiwei
  • Chen, Zehua
  • Pereyra, Carlos
  • Pols, Mike
  • Gałkowski, Krzysztof
  • Anaya, Miguel
  • Fu, Shuai|||0000-0003-4038-2384
  • Jia, Xiaoyu
  • Tang, PengYi|||0000-0002-2306-095X
  • Kubicki, Dominik Józef
  • Agarwalla, Anand
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Prochowicz, Daniel
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Bonn, Mischa|||0000-0001-6851-8453
  • Bao, Chunxiong
  • Sun, Xiaoxiao
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Emsley, Lyndon
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Gao, Feng
  • Fu, Fan
  • Wang, Hai I.|||0000-0003-0940-3984
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Stranks, Samuel D.|||0000-0002-8303-7292
  • Tao, Shuxia
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Understanding defects is of paramount importance for the development of stable halide perovskite solar cells (PSCs). However, isolating their distinctive effects on device efficiency and stability is currently a challenge. We report that adding the organic molecule 3-phosphonopropionic acid (H3pp) to the halide perovskite results in unchanged overall optoelectronic performance while having a tremendous effect on device stability. We obtained PSCs with ∼21% efficiency that retain ∼100% of the initial efficiency after 1,000 h at the maximum power point under simulated AM1.5G illumination. The strong interaction between the perovskite and the H3pp molecule through two types of hydrogen bonds (HI and OH) leads to shallow point defect passivation that has a significant effect on device stability but not on the non-radiative recombination and device efficiency. We expect that our work will have important implications for the current understanding and advancement of operational PSCs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Roadmap on commercialization of metal halide perovskite photovoltaics

  • Feng, Shien-Ping|||0000-0002-3941-1363
  • Cheng, Yuanhang
  • Yip, Hin-Lap|||0000-0002-5750-9751
  • Zhong, Yufei|||0000-0001-9845-8607
  • Fong, Patrick W.K.|||0000-0002-2460-4525
  • Li, Gang|||0000-0001-8399-7771
  • Ng, Annie|||0000-0002-5975-2499
  • Chen, Cong
  • Castriotta, Luigi Angelo|||0000-0003-2525-8852
  • Matteocci, Fabio|||0000-0001-7893-1356
  • Vesce, Luigi|||0000-0003-3322-8688
  • Saranin, Danila
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Wang, Puqun
  • Wei Ho, Jian
  • Hou, Yi|||0000-0002-1532-816X
  • Lin, Fen
  • Aberle, Armin G.
  • Song, Zhaoning|||0000-0002-6677-0994
  • Yan, Yanfa|||0000-0003-3977-5789
  • Chen, Xu
  • Yang, Y.M.
  • Syed, Ali Asgher
  • Ahmad, Ishaq
  • Leung, Tiklun
  • Wang, Yantao
  • Lin, JingYang
  • Ng, Alan Man Ching|||0000-0001-7081-8244
  • Li, Yin
  • Ebadi, Firouzeh
  • Tress, Wolfgang
  • Richardson, Giles|||0000-0001-6225-8590
  • Ge, Chuangye
  • Hu, Hanlin
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Baumann, Fanny|||0000-0003-0203-5971
  • Tanko, Kenedy T.|||0000-0002-2466-7104
  • Pereyra, Carlos
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Khenkin, Mark V.|||0000-0001-9201-0238
  • Visoly-Fisher, Iris|||0000-0001-6058-4712
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Vaynzof, Yana|||0000-0002-0783-0707
  • Vidal, Rosario|||0000-0001-7872-0620
  • Yu, Guicheng
  • Lin, Haoran|||0000-0003-0625-8881
  • Weng, Shuchen
  • Wang, Shifeng|||0000-0001-6169-2598
  • Djurišic, Aleksandra B.|||0000-0002-5183-1467
Perovskite solar cells (PSCs) represent one of the most promising emerging photovoltaic technologies due to their high power conversion efficiency. However, despite the huge progress made not only in terms of the efficiency achieved, but also fundamental understanding of the relevant physics of the devices and issues which affect their efficiency and stability, there are still unresolved problems and obstacles on the path toward commercialization of this promising technology. In this roadmap, we aim to provide a concise and up to date summary of outstanding issues and challenges, and the progress made toward addressing these issues. While the format of this article is not meant to be a comprehensive review of the topic, it provides a collection of the viewpoints of the experts in the field, which covers a broad range of topics related to PSC commercialization, including those relevant for manufacturing (scaling up, different types of devices), operation and stability (various factors), and environmental issues (in particular the use of lead). We hope that the article will provide a useful resource for researchers in the field and that it will facilitate discussions and move forward toward addressing the outstanding challenges in this fast-developing field.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Functionalized MXene/Halide Perovskite Heterojunctions for Perovskite Solar Cells Stable Under Real Outdoor Conditions

  • Karimipour, Masoud|||0000-0002-6619-4798
  • Paingott Parambil, Ashitha|||0000-0002-6385-9176
  • Tanko, Kenedy T.|||0000-0002-2466-7104
  • Zhang, Tiankai
  • Gao, Feng
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Despite the performance improvement in perovskite solar cells (PSCs) when MXenes are employed as transport layers, device stability studies are still missing. Especially under real outdoor conditions where devices are subjected to the synergy of multiple stressors. In this work, functionalized 2D titanium carbide (TiC) MXene is employed in normal PSC configuration, at the interface between the halide perovskite and the hole transport layer. The functionalization of the TiC MXene is made utilizing the same organic additive passivating the halide perovskite layer. The functionalizing strategy creates a continuous link between the MXene and the halide perovskite layer. Champion MXene-based PSCs revealed a ≈22% efficiency, in comparison with the control device showing 20.56%. Stability analyses under ISOS protocols under different conditions (dark, continuous light irradiation and real outdoor analysis) reveal that the enhancement of the PSCs lifespan is always observed when the MXene layer is employed. Analysis under continuous light irradaition (ISOS-L) reveal an almost 100% retention of the efficiency for the MXene-modified device, and outdoor testing (ISOS-O) carried out for.