Skip to main content

NUEVOS DESARROLLOS EN LA SOLUCION ESTRUCTURAL DE MICRO/NANODOMINIOS CRISTALINOS POR DIFRACCION SINCROTRONICA A TRAVES DEL SUSTRATO

MAT2015-67593-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the viability of Mg extraction in MgMoN2: a combined experimental and theoretical approach

  • Verrelli, Roberta
  • Arroyo de Dompablo, Maria Elena
  • Tchitchekova , Deyana S.
  • Black, Ashley P.
  • Frontera, Carlos
  • Fuertes, Amparo
  • Palacín, M. Rosa
Layered MgMoN2 was prepared by solid state reaction at high temperature between Mo and Mg3N2 in N2 which represents a simple synthetic pathway compared to the previously reported method that used NaN3 as nitrogen source. The crystal structure of MgMoN2 was studied by synchrotron X-ray and neutron powder diffraction. The feasibility of oxidizing this compound and concomitantly extracting magnesium from the structure was assessed by both chemical and electrochemical approaches, using different protocols. The X-ray diffraction patterns of oxidized samples do not exhibit any relevant difference with respect to that of the as prepared MgMoN2 and no differences in the cell parameters are deduced from Rietveld refinements. No hints pointing at the presence of any amorphous phase are observed either. These results are rationalized through DFT calculated energy barriers for Mg2+ ion migration in MgMoN2, We acknowledge Ministerio de Ciencia e Innovación (Spain) for grants MAT2014-53500-R and MAT2015-67593-P, and for “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015- 0496) awarded to ICMAB. We thank the Institut Laue Langevin (ILL) and Alba synchrotron for the provision of beamtime; we also thank Dr. Clemens Ritter (ILL) and Dr. F. Fauth (Alba) for assistance during data collection M.E. Arroyo acknowledges access to computational resources from Universidad de Oviedo (MALTA-Consolider cluster) and the Spanish's national high performance computer service (I2 Basque Centre)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

First terrestrial occurrence of the complex phosphate chladniite: crystal-structure refinement by synchrotron through-the-substrate microdiffraction

  • Vallcorba, Oriol
  • Casas, Lluís
  • Colombo, Fernando
  • Frontera, Carlos
  • Rius, Jordi
Chladniite, a complex phosphate species belonging to the fillowite group so far only found in meteorites, was identified in a pegmatite from Córdoba (Argentina) as inclusions in beusite. Applying synchrotron through-the-substrate microdiffraction technique (tts-μXRD) to polished thin sections prepared on very thin glass substrates (0.1 mm), diffraction data with nearly single-crystal quality were directly measured at selected chladniite microvolumes of the section. Chladniite is trigonal (space group R-3), with a = 15.0133(3) Å, c = 42.887(2) Å, V = 8371.6(5) Å3. The subsequent crystal structure refinement confirms that the accuracy attainable by using 0.1 mm thick glass-substrates is comparable to that of routine single-crystal measurements [R1=3.34% for 1617 unique reflections]. The refined crystal structure of pegmatitic chladniite differs from meteoritic one in the cation ordering (Mg, Fe+Mn and Ca) at the various metal sites, with Mn being dominant at the M(1) position., Thanks are due to Mr. Luis Gordón and Mr. Marc Puigcerver (Lab. de Preparació de Làmines Primes, Dpt. de Geologia, U. Autònoma de Barcelona) for their decisive contribution in the development of the technique, and to Dr. Jorge Sfragulla (U. Nac. de Córdoba) for help with the field work. The financial support of the Spanish ‘Ministerio de Economía y Competitividad’ (Projects ‘NANOXRED’: MAT2012-35247; MAT2015-67593-P and Severo Ochoa: SEV-2015-0496) is gratefully acknowledged. FC gratefully acknowledges CONICET for a stay at ICMAB. Thank are also due to the ALBA synchrotron (Barcelona, Spain) for beamtime (experiment Nr. 201521156) and to the ‘Centres Científics i Tecnològics de la Universitat de Barcelona’ for some EMP analyses., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Increasing data completeness in synchrotron tts-microdiffraction experiments for δ-recycling phasing of low-symmetry compounds, Increasing data completeness in synchrotron tts-microdiffraction experiments: Its application to δ-recycling phasing

  • Rius, Jordi
  • Vallcorba, Oriol
  • Crespi, Anna
  • Colombo, Fernando
Successful phasing of synchrotron through-the-substrate microdiffraction data by δ-recycling direct-methods largely depends on the number of missing intensities caused by the limited sample rotation range [J. Rius, Direct phasing from Patterson syntheses by δ recycling. Acta Cryst. A 2012, 68, 77–81]. Particularly, for the unfavorable triclinic system, dataset completeness resulting from a single series of consecutive ϕ-scans covering a total ϕ interval of ±35° is around 41%. This value is not enough for the routinary solution of a crystal structure by δ-recycling but can be increased by ~29% by applying the orthogonal χ strategy consisting of merging the information of two series of orthogonal ϕ-scans collected at the same microvolume of the polished thin section. Test calculations using simulated and experimental tts-data of the triclinic mineral axinite confirm that, with the help of the orthogonal χ strategy, crystal structures can be solved routinely. Since data in the ±35 ϕ-interval are normally accessible even for relatively thick glass-substrates (1–1.5 mm), a crystal structure can be determined from a single microvolume. For high-symmetry phases, due to the Laue symmetry redundancy, a single series of ϕ-scans normally suffices for the application of δ-recycling. However, when for experimental causes this series is incomplete, the orthogonal χ strategy also provides a simple way to increase the completeness which besides allowing solving the structure, is also beneficial for the subsequent refinement., The financial support of the Spanish ‘Ministerio de Economía, Industria y Competitividad’ (Projects MAT2015-67593-P and “Severo Ochoa” SEV-2015- 0496) is gratefully acknowledged. Thank are also due to the ALBA synchrotron (Barcelona, Spain) for beamtime (experiment Nr. 2016021655). OV also thanks the in-house project IH15-BL04., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

d2Dplot: 2D X-ray diffraction data processing and analysis for through-the-substrate microdiffraction

  • Vallcorba, Oriol
  • Rius, Jordi
The d2Dplot computer program provides a set of tools for the visualization, processing and analysis of 2D X-ray diffraction (2DXRD) data. Among the operations available there are the sum/subtraction of 2DXRD images, conversion to 1D data (powder pattern), azimuthal plotting, calibration of instrumental parameters, background subtraction and a command-line mode to run operations inside data processing pipelines. The graphical user interface allows easy use of the program. It also includes two main features: (i) the possibility of creating a user compound database to help in the fast phase identification of similar samples, and (ii) a detailed peak analysis routine for the application of the through-the-substrate microdiffraction methodology., Financial support by projects MAT2015-67593-P and ‘Severo Ochoa’ (SEV-2015-0496) of MINECO and FEDER is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Topochemical synthesis of cation ordered double perovskite oxynitrides

  • Ceravola, Roberta
  • Oró, Judith
  • Black, Ashley P.
  • Ritter, C.
  • Puente-Orench, Inés
  • Mata, Ignasi
  • Molins, Elies
  • Frontera, Carlos
  • Fuertes, Amparo
Topochemical nitridation in ammonia at moderate temperatures of cation ordered Sr2FeWO6 produces new antiferromagnetic double perovskite oxynitrides Sr2FeWO6-xNx with 0 < x ≤ 1. Nitrogen introduction induces the oxidation of Fe2+ to Fe3+ and decreases TN from 38 K (x = 0) to 13 K for Sr2FeWO5N which represents the first example of a double perovskite oxynitride with both high cationic order and nitrogen content. This synthetic approach can be extended to other cation combinations expanding the possibility of new materials in the large group of double perovskites., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO), Spain (Projects MAT2014-53500-R, MAT2015-71664-R, MAT2015-67593-P and ENE2015-63969) and it has been developed under the Materials Science PhD program of the Universitat Autònoma de Barcelona. Fellowship support to AB from MINECO (FPI, project MAT2011-24757) is gratefully acknowledged. ICMAB acknowledges financial support from MINECO through the Severo Ochoa Program (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combining X-ray whole powder pattern modeling, rietveld and pair distribution function analyses as a novel bulk approach to study interfaces in heteronanostructures: Oxidation front in FeO/Fe3O4 core/shell nanoparticles as a case study

  • Ichikawa, Rodrigo U.
  • Roca, Alejandro G.
  • López-Ortega, Alberto
  • Estrader, Marta
  • Peral, Inmaculada
  • Turrillas, Xabier M.
  • Nogués, Josep
Understanding the microstructure in heterostructured nanoparticles is crucial to harnessing their properties. Although microscopy is ideal for this purpose, it allows for the analysis of only a few nanoparticles. Thus, there is a need for structural methods that take the whole sample into account. Here, a novel bulk‐approach based on the combined analysis of synchrotron X‐ray powder diffraction with whole powder pattern modeling, Rietveld and pair distribution function is presented. The microstructural temporal evolution of FeO/Fe3O4 core/shell nanocubes is studied at different time intervals. The results indicate that a two‐phase approach (FeO and Fe3O4) is not sufficient to successfully fit the data and two additional interface phases (FeO and Fe3O4) are needed to obtain satisfactory fits, i.e., an onion‐type structure. The analysis shows that the Fe3O4 phases grow to some extent (≈1 nm) at the expense of the FeO core. Moreover, the FeO core progressively changes its stoichiometry to accommodate more oxygen. The temporal evolution of the parameters indicates that the structure of the FeO/Fe3O4 nanocubes is rather stable, although the exact interface structure slightly evolves with time. This approach paves the way for average studies of interfaces in different kinds of heterostructured nanoparticles, particularly in cases where spectroscopic methods have some limitations., R.U.I. acknowledges CAPES and CNPq (No. 206983/2014‐0) Brazilian agencies. A.G.R. and J.N. thanks the support of the Generalitat de Catalunya through the 2017‐SGR‐292 project and the Beatriu de Pinos Program (2011 BPB 00209) and the Spanish Ministerio de Economía y Competitividad (MINECO) through the MAT2016‐77391‐R project. I.P. was supported by the National Research Fund of Luxembourg (Grant No. FNR‐Inter2015/LRSF). A.L.‐O. acknowledges the MINECO through the Juan de la Cierva Program (IJCI‐2014‐21530). X.T. would like to acknowledge the financial support from the MINECO projects MAT2015‐67593‐P and BIA2014‐57658‐C2‐1‐R. The ALBA Synchrotron is acknowledged for the provision of beamtime and the MSPD beamline staff is for their help during the XRD measurements. Dr. Luis G. Martinez from IPEN/CNEN is acknowledged for useful discussions about XRD techniques. Dr. Paolo Scardi from Università degli Studi di Trento is acknowledged for the helpful discussions about WPPM and for providing PM2K v.3 software. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV‐2013‐0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Breaking Preconceptions: Thin Section Petrography For Ceramic Glaze Microstructures

  • Febo, Roberta Di
  • Casas, Lluís
  • Rius, Jordi
  • Tagliapietra, Riccardo
  • Melgarejo, Joan Carles
During the last thirty years, microstructural and technological studies on ceramic glazes have been essentially carried out through the use of Scanning Electron Microscopy (SEM) combined with energy dispersive X-ray analysis (EDX). On the contrary, optical microscopy (OM) has been considered of limited use in solving the very complex and fine-scale microstructures associated with ceramic glazes. As the crystallites formed inside glazes are sub- and micrometric, a common misconception is that it is not possible to study them by OM. This is probably one of the reasons why there are no available articles and textbooks and even no visual resources for describing and characterizing the micro-crystallites formed in glaze matrices. A thin section petrography (TSP) for ceramic glaze microstructures does not exist yet, neither as a field of study nor conceptually. In the present contribution, we intend to show new developments in the field of ceramic glaze petrography, highlighting the potential of OM in the microstructural studies of ceramic glazes using petrographic thin sections. The outcomes not only stress the pivotal role of thin section petrography for the study of glaze microstructures but also show that this step should not be bypassed to achieve reliable readings of the glaze microstructures and sound interpretations of the technological procedures. We suggest the adoption by the scientific community of an alternative vision on glaze microstructures to turn thin section petrography for glaze microstructures into a new specialized petrographic discipline. Such an approach, if intensively developed, has the potential to reduce the time and costs of scientific investigations in this specific domain. In fact, it can provide key reference data for the identification of the crystallites in ceramic glazes, avoiding the repetition of exhaustive protocols of expensive integrated analyses., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Topochemical nitridation of Sr2FeMoO6

  • Ceravola, Roberta
  • Frontera, Carlos
  • Oró, Judith
  • Black, Ashley P.
  • Ritter, Clemens
  • Mata, Ignasi
  • Molins, Elies
  • Fontcuberta, Josep
  • Fuertes, Amparo
The topotactic nitridation of cation ordered, tetragonal Sr2FeMoO6 in NH3 at moderate temperatures leads to cubic, Fm[3 with combining macron]m double perovskite oxynitride Sr2FeMoO4.9N1.1 where double-exchange interactions determine ferromagnetic order with TC ≈ 100 K. Substitution of oxide by nitride induces bond asymmetries and local electronically driven structural distortions, which combined with Fermi level lowering restricts charge itinerancy to confined regions and preclude spontaneous long-range magnetic order. Under a magnetic field, ferromagnetic correlations expand, favoring charge delocalization and a negative magnetoresistance is observed., This work was supported by the Spanish Ministerio de Ciencia, Universidades e Investigación, Spain (Projects MAT2017-86616-R, MAT2017-85232-R, MAT2015-71664-R, MAT2015-67593-P and ENE2015-63969) and by Generalitat de Catalunya (2017SGR1377, 2017SGR581). ICMAB acknowledges financial support from MINECO through the Severo Ochoa Program (SEV-2015-0496). We thank the Institut Laue Langevin (ILL) and Alba synchrotron for the provision of beam time., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Band structure of CuMnAs probed by optical and photoemission spectroscopy

  • Veis, M.
  • Minar, Jan
  • Steciuk, Gwladys
  • Palatinus, Lukáš
  • Rinaldi, Christian
  • Cantoni, M.
  • Kriegner, D.
  • Tikuisis, Kristupas K.
  • Hamrle, Jaroslav
  • Zahradnik, Martin
  • Antos, Roman
  • Zelezny, Jakub
  • Smejkal, Libor
  • Wadley, Peter
  • R. P. Campion
  • Frontera, Carlos
  • Uhlířová, Klára
  • Duchon, T.
  • Kuzel, P.
  • Novak, Vit
  • Jungwirth, T.
  • Vyborny, K.
5 pages, 5 figures + Supplementary Information, Tetragonal phase of CuMnAs progressively appears as one of the key materials for antiferromagnetic spintronics due to efficient current-induced spin-orbit torques whose existence can be directly inferred from crystal symmetry. Theoretical understanding of spintronic phenomena in this material, however, relies on the detailed knowledge of electronic structure (band structure and corresponding wave functions) which has so far been tested only to a limited extent. We show that AC permittivity (obtained from ellipsometry) and UV photoelectron spectra agree with density functional calculations. Together with the x-ray diffraction and precession electron diffraction tomography, our analysis confirms recent theoretical claim [Phys.Rev.B 96, 094406 (2017)] that copper atoms occupy lattice positions in the basal plane of the tetragonal unit cell., We acknowledge support from National Grid Infrastructure MetaCentrum provided under the programme “Projects of Large Research, Development, and Innovations Infrastructures” (CESNET LM2015042); Grant Agency of the Czech Republic under Grant No. 15-13436S; CEDAMNF (CZ.02.1.01/0.0/0.0/15_003/0000358) of the Czech ministry of education (MŠMT) as well as its LM2015087 and LNSMLNSpin grants; Cariplo Foundation, Grant No. 2013-0726 (MAGISTER); Spanish MINECO under MAT2015-67593-P project and the ‘Severo Ochoa’ Programme (SEV-2015-0496); EU FET Open RIA Grant No. 766566; Engineering and Physical Sciences Research Council Grant No. EP/P019749/1. P.W. acknowledges support from the Royal Society through a University Research Fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New rare earth hafnium oxynitride perovskites with photocatalytic activity in water oxidation and reduction

  • Black, Ashley P.
  • Suzuki, Hajime
  • Higashi, Masanobu
  • Frontera, Carlos
  • Ritter, Clemens
  • De, Chandan
  • Sundaresan, A.
  • Abe, Ryu
  • Fuertes, Amparo
RHfO2N perovskites with R = La, Nd and Sm show a GdFeO3-type structure and are semiconductors with band gaps of 3.35, 3.40 and 2.85 eV and relative dielectric constants of 30, 16 and 28 respectively. These compounds have adequate reduction and oxidation potentials to conduct the overall water splitting reaction, and the analogous perovskite LaZrO2N with a band gap of 2.8 eV shows photocatalytic activity under visible light irradiation for O2 evolution., This work was supported by the MINEICO, Spain (Projects MAT2014-53500-R, MAT2015-67593-P, MAT2017-86616-R and SEV- 2015-0496), the JSPS-Japan (17H06439), and it has been developed under the PhD program of the UAB. Dr J. Oró-Solé is acknowledged for EDS measurements. We thank the ILL, ISIS and Alba synchrotron (experiment number 2015091410) for the provision of beamtime, and Dr F. Fauth (Alba) for assistance during data collection., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Breaking preconceptions, Thin section petrography for ceramic glaze microstructures

  • Di Febo, Roberta|||0000-0002-1102-8231
  • Casas, Lluís|||0000-0003-0948-8658
  • Rius Palleiro, Jordi
  • Tagliapietra, Riccardo
  • Melgarejo Draper, Joan Carles|||0000-0001-7544-1191
During the last thirty years, microstructural and technological studies on ceramic glazes have been essentially carried out through the use of Scanning Electron Microscopy (SEM) combined with energy dispersive X-ray analysis (EDX). On the contrary, optical microscopy (OM) has been considered of limited use in solving the very complex and fine-scale microstructures associated with ceramic glazes. As the crystallites formed inside glazes are sub- and micrometric, a common misconception is that it is not possible to study them by OM. This is probably one of the reasons why there are no available articles and textbooks and even no visual resources for describing and characterizing the micro-crystallites formed in glaze matrices. A thin section petrography (TSP) for ceramic glaze microstructures does not exist yet, neither as a field of study nor conceptually. In the present contribution, we intend to show new developments in the field of ceramic glaze petrography, highlighting the potential of OM in the microstructural studies of ceramic glazes using petrographic thin sections. The outcomes not only stress the pivotal role of thin section petrography for the study of glaze microstructures but also show that this step should not be bypassed to achieve reliable readings of the glaze microstructures and sound interpretations of the technological procedures. We suggest the adoption by the scientific community of an alternative vision on glaze microstructures to turn thin section petrography for glaze microstructures into a new specialized petrographic discipline. Such an approach, if intensively developed, has the potential to reduce the time and costs of scientific investigations in this specific domain. In fact, it can provide key reference data for the identification of the crystallites in ceramic glazes, avoiding the repetition of exhaustive protocols of expensive integrated analyses.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Combining X-Ray Whole Powder Pattern Modeling, Rietveld and Pair Distribution Function Analyses as a Novel Bulk Approach to Study Interfaces in Heteronanostructures, Oxidation Front in FeO/Fe3O4 Core/Shell Nanoparticles as a Case Study

  • Ichikawa, Rodrigo U.|||0000-0002-7661-9999
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Peral Alonso, Inmaculada|||0000-0002-6994-1277
  • Turrillas, Xabier|||0000-0002-3419-2229
  • Nogués, Josep|||0000-0003-4616-1371
Understanding the microstructure in heterostructured nanoparticles is crucial to harnessing their properties. Although microscopy is ideal for this purpose, it allows for the analysis of only a few nanoparticles. Thus, there is a need for structural methods that take the whole sample into account. Here, a novel bulk-approach based on the combined analysis of synchrotron X-ray powder diffraction with whole powder pattern modeling, Rietveld and pair distribution function is presented. The microstructural temporal evolution of FeO/FeO core/shell nanocubes is studied at different time intervals. The results indicate that a two-phase approach (FeO and FeO) is not sufficient to successfully fit the data and two additional interface phases (FeO and FeO) are needed to obtain satisfactory fits, i.e., an onion-type structure. The analysis shows that the FeO phases grow to some extent (≈1 nm) at the expense of the FeO core. Moreover, the FeO core progressively changes its stoichiometry to accommodate more oxygen. The temporal evolution of the parameters indicates that the structure of the FeO/FeO nanocubes is rather stable, although the exact interface structure slightly evolves with time. This approach paves the way for average studies of interfaces in different kinds of heterostructured nanoparticles, particularly in cases where spectroscopic methods have some limitations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Topochemical nitridation of Sr2FeMoO6

  • Ceravola, Roberta|||0000-0002-3785-3854
  • Frontera, Carlos|||0000-0002-0091-4756
  • Oró-Solé, Judith|||0000-0002-3755-4950
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Ritter, Clemens
  • Mata, Ignasi|||0000-0002-4835-9659
  • Molins Grau, Elies|||0000-0003-1012-0551
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Fuertes, Amparo|||0000-0001-5338-9724
The topotactic nitridation of cation ordered, tetragonal SrFeMoO in NH at moderate temperatures leads to cubic, Fm3m double perovskite oxynitride SrFeMoON where double-exchange interactions determine ferromagnetic order with T ≈ 100 K. Substitution of oxide by nitride induces bond asymmetries and local electronically driven structural distortions, which combined with Fermi level lowering restricts charge itinerancy to confined regions and preclude spontaneous long-range magnetic order. Under a magnetic field, ferromagnetic correlations expand, favoring charge delocalization and a negative magnetoresistance is observed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Through the Looking Glass, Technological Characterization of Roman Glasses Mimicking Precious Stones from the Gorga Collection (Museo Nazionale Romano-Palazzo Altemps)

  • Di Febo, Roberta|||0000-0002-1102-8231
  • Casas, Lluís|||0000-0003-0948-8658
  • Silvestri, Alberta|||0000-0001-9747-3194
  • del Campo, Ángel Adolfo
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Queralt, Ignasi|||0000-0002-8790-8382
  • Oró-Solé, Judith|||0000-0002-3755-4950
  • Villa Navas, Mario|||0000-0003-2949-5628
  • Gàzquez, Jaume
  • Rius, Jordi
  • Giobbe, Chiara
  • Bandini, Giovanna
This paper provides a detailed technological characterization of the Roman opus sectile glasses (second century AD) coming from the renowned Gorga collection. Nine glass samples corresponding to imitations of the porfido verde antico, cipollino rosso, rosso antico, giallo antico, diaspro nero e giallo, semesanto and agate/alabaster stones were studied. The aim of this study was twofold: (i) archaeometric, i.e., to provide valuable data on the production, raw materials and techniques of these refined Roman glasses that mimic precious stones and (ii) methodological, i.e., to highlight the good performance of combining polished thin sections and local probe measurements for the study of glassy microstructures. Based on the nature of the flux used, the glasses from the samples were classified as either natron-type or mixed-type (natron/plant ash). The latter stem from remelted glasses and contain relict grains of wollastonite that were not found in the pure natron samples. Relict wollastonite crystals appear to be a proficient petrographic marker to spot recycled glasses along with the commonly used chemical fingerprints. Different production and colouring techniques were identified, even for a given type of imitated stone. Metallic Cu, Ca antimonates and Pb-Fe antimonates were the three opacifiers used for the opaque glasses. Based on the crystal morphologies, metallic Cu and Ca antimoniates were possibly synthesized in situ simultaneously with the glass, whilst the Pb-Fe antimonates were prepared ex situ. The working temperatures for these glasses were estimated within the 900-1100 °C range based on the presence and known thermal stability of some identified crystal phases.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Synchrotron X-ray microdiffraction to study dental structures in Cretaceous crocodylomorphs

  • Vallcorba, Oriol
  • Canillas, M.
  • Audije Gil, Julia
  • Barroso Barcenilla, Fernando|||0000-0002-7938-7230
  • González Martín, A.
  • Molera, Judit
  • Rodríguez Barbero, Miguel Ángel
  • Cambra Moo, Óscar
Synchrotron radiation X-ray microdiffraction (SR-mXRD) has been applied for the first time as a fundamental method of analysis to unveil crocodilian teeth growth and development. Teeth from a fossil crocodylomorph from the Upper Cretaceous site of Lo Hueco (Spain) and a modern crocodylian from the living species Crocodylus niloticus have been analysed. Both samples have been studied through Polarized Light Microscopy, Scanning Electron Microscopy coupled with Energy Dispersive X-Ray Spectroscopy, Confocal Raman Spectroscopy, and SR-mXRD. Significant differences have been found in hydroxyapatite (HA) crystallite sizes and texture, and the evolution of these two features along teeth depth. The main differences observed in crystallite size are related to postdepositional processes and/or the environmental and functional pressures of teeth during crocodylomorph life, very different from that of the modern specimen. Regarding the crystalline texture in the tooth enamel, it can be linked to teeth functionality during crocodilian life, causing the directed growth of HA crystallites due to the mechanical stress to which they are subjected., Ministerio de Economía y Competitividad, Agencia Estatal de Investigación