Skip to main content

NANOMATERIALES MAGNETO-FOTONICOS MULTIFUNCIONALES PARA APLICACIONES BIOMEDICAS: FABRICACION TOP-DOWN, BOTTOM-UP E HIBRIDAS

MAT2016-77391-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic-scale determination of cation inversion in spinel-based oxide nanoparticles

  • Torruella, Pau
  • Ruiz-Caridad, Alicia
  • Walls, Michael
  • Roca, Alejandro G.
  • López-Ortega, Alberto
  • Blanco-Portals, Javier
  • López-Conesa, Lluís
  • Nogués, Josep
  • Peiró, Francesca
  • Estradé, Sònia
The atomic structure of nanoparticles can be easily determined by transmission electron microscopy. However, obtaining atomic-resolution chemical information about the individual atomic columns is a rather challenging endeavor. Here, crystalline monodispersed spinel Fe3O4/Mn3O4 core–shell nanoparticles have been thoroughly characterized in a high-resolution scanning transmission electron microscope. Electron energy-loss spectroscopy (EELS) measurements performed with atomic resolution allow the direct mapping of the Mn2+/Mn3+ ions in the shell and the Fe2+/Fe3+ in the core structure. This enables a precise understanding of the core–shell interface and of the cation distribution in the crystalline lattice of the nanoparticles. Considering how the different oxidation states of transition metals are reflected in EELS, two methods of performing a local evaluation of the cation inversion in spinel lattices are introduced. Both methods allow the determination of the inversion parameter in the iron oxide core and manganese oxide shell, as well as detecting spatial variations in this parameter, with atomic resolution. X-ray absorption measurements on the whole sample confirm the presence of cation inversion. These results present a significant advance toward a better correlation of the structural and functional properties of nanostructured spinel oxides., The authors acknowledge funding from the Spanish Ministerio de Economía y Competitividad (MINECO) through the projects MAT2016-77391-R and MAT2016-79455-P/FEDER (UE). This work has also been carried out in the framework of the projects 2017-SGR-292 and 2017-SGR-776 from the Generalitat de Catalunya. A.L.O. acknowledges the MINECO through the Juan de la Cierva Program (IJCI-2014-21530). M.W. acknowledges the European Union Seventh Framework Programme under grant agreement no. 312483-ESTEEM2. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, grant SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combining X-ray whole powder pattern modeling, rietveld and pair distribution function analyses as a novel bulk approach to study interfaces in heteronanostructures: Oxidation front in FeO/Fe3O4 core/shell nanoparticles as a case study

  • Ichikawa, Rodrigo U.
  • Roca, Alejandro G.
  • López-Ortega, Alberto
  • Estrader, Marta
  • Peral, Inmaculada
  • Turrillas, Xabier M.
  • Nogués, Josep
Understanding the microstructure in heterostructured nanoparticles is crucial to harnessing their properties. Although microscopy is ideal for this purpose, it allows for the analysis of only a few nanoparticles. Thus, there is a need for structural methods that take the whole sample into account. Here, a novel bulk‐approach based on the combined analysis of synchrotron X‐ray powder diffraction with whole powder pattern modeling, Rietveld and pair distribution function is presented. The microstructural temporal evolution of FeO/Fe3O4 core/shell nanocubes is studied at different time intervals. The results indicate that a two‐phase approach (FeO and Fe3O4) is not sufficient to successfully fit the data and two additional interface phases (FeO and Fe3O4) are needed to obtain satisfactory fits, i.e., an onion‐type structure. The analysis shows that the Fe3O4 phases grow to some extent (≈1 nm) at the expense of the FeO core. Moreover, the FeO core progressively changes its stoichiometry to accommodate more oxygen. The temporal evolution of the parameters indicates that the structure of the FeO/Fe3O4 nanocubes is rather stable, although the exact interface structure slightly evolves with time. This approach paves the way for average studies of interfaces in different kinds of heterostructured nanoparticles, particularly in cases where spectroscopic methods have some limitations., R.U.I. acknowledges CAPES and CNPq (No. 206983/2014‐0) Brazilian agencies. A.G.R. and J.N. thanks the support of the Generalitat de Catalunya through the 2017‐SGR‐292 project and the Beatriu de Pinos Program (2011 BPB 00209) and the Spanish Ministerio de Economía y Competitividad (MINECO) through the MAT2016‐77391‐R project. I.P. was supported by the National Research Fund of Luxembourg (Grant No. FNR‐Inter2015/LRSF). A.L.‐O. acknowledges the MINECO through the Juan de la Cierva Program (IJCI‐2014‐21530). X.T. would like to acknowledge the financial support from the MINECO projects MAT2015‐67593‐P and BIA2014‐57658‐C2‐1‐R. The ALBA Synchrotron is acknowledged for the provision of beamtime and the MSPD beamline staff is for their help during the XRD measurements. Dr. Luis G. Martinez from IPEN/CNEN is acknowledged for useful discussions about XRD techniques. Dr. Paolo Scardi from Università degli Studi di Trento is acknowledged for the helpful discussions about WPPM and for providing PM2K v.3 software. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV‐2013‐0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio
  • Güell-Grau, Pau
  • Tajada Herráiz, José Luis
  • Pou-Macayo, Laia
  • Lope-Piedrafita, Silvia
  • Pi, Francesc
  • Roca, Alejandro G.
  • Baró, María Dolors
  • Sort, Jordi
  • Nogués, Carme
  • Sepúlveda, Borja
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T2 contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm2). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies., This work is supported by Spanish Ministry of Economy, Industry and Competitiveness (MINECO) and European Regional Development Fund (FEDER) (Projects number: MAT2013-48628-R, MAT2016-77391-R, MAT2017-86357-C3-1-R and MAT2017-86357-C3-3-R). Generalitat de Catalunya (2017-SGR-292) is acknowledged. ICN2 is funded by the Centres de Recerca de Catalunya (CERCA) Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Zhi Li acknowledges the Chinese Scholarship Council Program (201506950059) for financial support. Jordi Sort acknowledges the financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement N° 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simultaneous local heating/thermometry based on plasmonic magnetochromic nanoheaters

  • Li, Zhi
  • López-Ortega, Alberto
  • Aranda-Ramos, Antonio
  • Tajada Herráiz, José Luis
  • Sort, Jordi
  • Nogués, Carme
  • Vavassori, Paolo
  • Nogués, Josep
  • Sepúlveda, Borja
A crucial challenge in nanotherapies is achieving accurate and real‐time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic‐induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60‐fold smaller than state‐of‐the‐art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real‐time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state‐of‐the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology., This work was supported by the Spanish Ministry of Economy, Industry and Competitivenes (MINECO) projects MAT2013‐48628‐R, MAT2016‐77391‐R, and PCIN‐2016‐093 (H2020 M‐ERA.NET). Z.L. acknowledges the Chinese Scholarship Council (CSC) Program (201506950059) for financial support. The 2017‐SGR‐292 project of the Generalitat de Catalunya is acknowledged. The ICN2 was funded by the Centres de Recerca de Catalunya (CERCA) programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa programme (MINECO, No. SEV‐2013‐0295). A.L.‐O. and P.V. acknowledge funding from the Basque Government (No. PI2015_1_19), MINECO and the European Regional Development Fund (FEDER) (No. FIS2015 64519 R). A.L.‐O. acknowledges the support from Juan de la Cierva grant. This work was also supported by MINECO under the Maria de Maeztu Units of Excellence (MDM‐2016‐0618). J.S. acknowledges the financial support by the European Research Council (SPIN‐PORICS 2014‐Consolidator Grant, Agreement No. 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Precise size control of the growth of Fe3O4 nanocubes over a wide size range using a rationally designed one-pot synthesis

  • Muro-Cruces, Javier
  • Roca, Alejandro G.
  • López-Ortega, Alberto
  • Fantechi, Elvira
  • Pozo-Bueno, Daniel del
  • Estradé, Sònia
  • Peiró, Francesca
  • Sepúlveda, Borja
  • Pineider, Francesco
  • Sangregorio, Claudio
  • Nogués, Josep
The physicochemical properties of spinel oxide magnetic nanoparticles depend critically on both their size and shape. In particular, spinel oxide nanocrystals with cubic morphology have shown superior properties in comparison to their spherical counterparts in a variety of fields, like, for example, biomedicine. Therefore, having an accurate control over the nanoparticle shape and size, while preserving the crystallinity, becomes crucial for many applications. However, despite the increasing interest in spinel oxide nanocubes there are relatively few studies on this morphology due to the difficulty to synthesize perfectly defined cubic nanostructures, especially below 20 nm. Here we present a rationally designed synthesis pathway based on the thermal decomposition of iron(III) acetylacetonate to obtain high quality nanocubes over a wide range of sizes. This pathway enables the synthesis of monodisperse Fe3O4 nanocubes with edge length in the 9–80 nm range, with excellent cubic morphology and high crystallinity by only minor adjustments in the synthesis parameters. The accurate size control provides evidence that even 1–2 nm size variations can be critical in determining the functional properties, for example, for improved nuclear magnetic resonance T2 contrast or enhanced magnetic hyperthermia. The rationale behind the changes introduced in the synthesis procedure (e.g., the use of three solvents or adding Na-oleate) is carefully discussed. The versatility of this synthesis route is demonstrated by expanding its capability to grow other spinel oxides such as Co-ferrites, Mn-ferrites, and Mn3O4 of different sizes. The simplicity and adaptability of this synthesis scheme may ease the development of complex oxide nanocubes for a wide variety of applications., We acknowledge funding from Generalitat de Catalunya through the 2017-SGR-292 and 2017-SGR-776 projects and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through the MAT2016-77391-R and MAT2016-79455-P projects. E.F. and F.P. acknowledge the University of Pisa for its funding through the PRA_2017_25 project. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self‐assembly of mechanoplasmonic bacterial cellulose–metal nanoparticle composites

  • Eskilson, Olof
  • Lindström, Stefan B.
  • Sepúlveda, Borja
  • Shahjamali, Mohammad M.
  • Güell-Grau, Pau
  • Sivlér, Petter
  • Skog, Mârten
  • Aronsson, Christopher
  • Björk, Emma M.
  • Nyberg, Niklas
  • Khalaf, Hazem
  • Bengtsson, Torbjörn
  • James, Jeemol
  • Ericson, Marica B.
  • Martinsson, Erik
  • Selegârd, Robert
  • Aili, Daniel
Nanocomposites of metal nanoparticles (NPs) and bacterial nanocellulose (BC) enable fabrication of soft and biocompatible materials for optical, catalytic, electronic, and biomedical applications. Current BC–NP nanocomposites are typically prepared by in situ synthesis of the NPs or electrostatic adsorption of surface functionalized NPs, which limits possibilities to control and tune NP size, shape, concentration, and surface chemistry and influences the properties and performance of the materials. Here a self‐assembly strategy is described for fabrication of complex and well‐defined BC–NP composites using colloidal gold and silver NPs of different sizes, shapes, and concentrations. The self‐assembly process results in nanocomposites with distinct biophysical and optical properties. In addition to antibacterial materials and materials with excellent senor performance, materials with unique mechanoplasmonic properties are developed. The homogenous incorporation of plasmonic gold NPs in the BC enables extensive modulation of the optical properties by mechanical stimuli. Compression gives rise to near‐field coupling between adsorbed NPs, resulting in tunable spectral variations and enhanced broadband absorption that amplify both nonlinear optical and thermoplasmonic effects and enables novel biosensing strategies., This work was supported by the Swedish Foundation for Strategic Research (SFF) grant no. FFL15‐0026 and framework grant RMX18‐0039 (HEALiX), the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University (Faculty Grant SFO‐Mat‐LiU no. 2009‐00971), the competence center FunMat‐II that is financially supported by Vinnova (grant no. 2016‐05156), and the Knut and Alice Wallenberg Foundation (grant no. KAW 2016.0231), the Swedish Research Council (grant Nos. 2017‐05178 and 2015‐05002) and the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) through the MAT2016‐77391‐R. The ICN2 was supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV‐2017‐0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simultaneous individual and dipolar collective properties in binary assemblies of magnetic nanoparticles

  • Sánchez, Elena H.
  • Vasilakaki, Marianna
  • Lee, Su Seong
  • Normile, Peter S.
  • Muscas, Giuseppe
  • Murgia, Massimiliano
  • Andersson, Mikael S.
  • Singh, Gurvinder
  • Mathieu, Roland
  • Nordblad, Per
  • Ricci, Pier Carlo
  • Peddis, Davide
  • Trohidou, Kalliopi N.
  • Nogués, Josep
  • Toro, José A. de
Applications based on aggregates of magnetic nanoparticles are becoming increasingly widespread, ranging from hyperthermia to magnetic recording. However, although some uses require collective behavior, others need a more individual-like response, the conditions leading to either of these behaviors are still poorly understood. Here, we use nanoscale-uniform binary random dense mixtures with different proportions of oxide magnetic nanoparticles with low/high anisotropy as a valuable tool to explore the crossover from individual to collective behavior. Two different anisotropy scenarios have been studied in two series of binary compacts: M1, comprising maghemite (γ-Fe2O3) nanoparticles of different sizes (9.0 nm/11.5 nm) with barely a factor of 2 between their anisotropy energies, and M2, mixing equally sized pure maghemite (low-anisotropy) and Co-doped maghemite (high-anisotropy) nanoparticles with a large difference in anisotropy energy (ratio > 8). Interestingly, while the M1 series exhibits collective behavior typical of strongly coupled dipolar systems, the M2 series presents a more complex scenario where different magnetic properties resemble either “individual-like” or “collective”, crucially emphasizing that the collective character must be ascribed to specific properties and not to the system as a whole. The strong differences between the two series offer new insight (systematically ratified by simulations) into the subtle interplay between dipolar interactions, local anisotropy and sample heterogeneity to determine the behavior of dense assemblies of magnetic nanoparticles., This work was supported by the Spanish Ministerio de Economia y Competitividad (grants MAT2015-65295-R and MAT2016-77391-R). J.N. also acknowledges funding from the Generalitat de Catalunya through the 2017-SGR-292 grant. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centers of Excellence program, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). M.S.A., R.M., and P.N. acknowledge support from The Swedish Research Council (VR). K.N.T, D.P., and M.V. acknowledge support from the European Union’s Horizon 2020 Research and Innovation Programme: under grant agreement no. 731976 (MAGENTA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probing the meta-stability of oxide core/shell nanoparticle systems at atomic resolution

  • Roldán, Manuel A.
  • Mayence, Arnaud
  • López-Ortega, Alberto
  • Ishikawa, Ryo
  • Salafranca, Juan
  • Estrader, Marta
  • Salazar-Álvarez, G.
  • Baró, María Dolors
  • Nogués, Josep
  • Pennycook, Stephen J.
  • Varela, María
Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their properties. In this work, the in-situ electron-induced selective reduction of Mn3O4 to MnO is studied in magnetic Fe3O4/Mn3O4 and Mn3O4/Fe3O4 core/shell nanoparticles by means of high-resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Such in-situ transformation allows mimicking the actual processes in operando environments. A multi-stage image analysis using geometric phase analysis combined with particle image velocity enables direct monitoring of the relationship between structure, chemical composition and strain relaxation during the Mn3O4 reduction. In the case of Fe3O4/Mn3O4 core/shell the transformation occurs smoothly without the formation of defects. However, for the inverse Mn3O4/Fe3O4 core/shell configuration the electron beam-induced transformation occurs in different stages that include redox reactions and void formation followed by strain field relaxation via formation of defects. This study highlights the relevance of understanding the local dynamics responsible for changes in the particle composition in order to control stability and, ultimately, macroscopic functionality., Research supported by the European Research Council Starting Investigator Award STEMOX # 239739 (M.R. and J. S.), JSPS Postdoctoral Fellowship for Research Abroad (R.I.) and by Spanish MAT2015-066888-C3-3-R and RTI2018-097895-B-C43 (MINECO/FEDER). Electron microscopy observations at Oak Ridge National Laboratory (ORNL) supported by the U.S. Department of Energy (DOE), Basic Energy Sciences (BES), Materials Sciences and Engineering Division and through a user project supported by ORNL’s Center for Nanophase Materials Sciences (CNMS), which is sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, U.S. Department of Energy. A.M. and G.S.A. thank the financial support of the Knut and Alice Wallenberg Foundation through the project 3DEM-NATUR. The work at INC2 has been supported by the 2017-SGR-292 project of the Generalitat de Catalunya and by the MAT2016-77391-R project of the Spanish MINECO. ALO acknowledges the Spanish Ministerio de Economía y Competitividad through the Juan de la Cierva Program (IJCI-2014-21530). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). S. J. P. thanks the National University of Singapore for funding. M. E. Acknowledges the Spanish MINECO for her Ramón y Cajal Fellowship (RYC2018-024396-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient Tumor Eradication at Ultralow Drug Concentration via Externally Controlled and Boosted Metallic Iron Magnetoplasmonic Nanocapsules

  • Fluksman, Arnon
  • Lafuente, Aritz
  • Li, Zhi
  • Sort, Jordi
  • Lope-Piedrafita, Silvia
  • Esplandiú, María J.
  • Nogués, Josep
  • Roca, Alejandro G.
  • Benny, Ofra
  • Sepúlveda, Borja
With the aim to locally enhance the efficacy of cancer nanotherapies, here we present metal iron based magnetoplasmonic drug-loaded nanocapsules (MAPSULES), merging powerful external magnetic concentration in the tumor and efficient photothermal actuation to locally boost the drug therapeutic action at ultralow drug concentrations. The MAPSULES are composed of paclitaxel-loaded polylactic-co-glycolic acid (PLGA) nanoparticles partially coated by a nanodome shape iron/silica semishell. The iron semishell has been designed to present a ferromagnetic vortex for incorporating a large quantity of ferromagnetic material while maintaining high colloidal stability. The large iron semishell provides very strong magnetic manipulation via magnetophoretic forces, enabling over 10-fold higher trapping efficiency in microfluidic channels than typical superparamagnetic iron oxide nanoparticles. Moreover, the iron semishell exhibits highly damped plasmonic behavior, yielding intense broadband absorbance in the near-infrared biological windows and photothermal efficiency similar to the best plasmonic nanoheaters. The in vivo therapeutic assays in a mouse xenograft tumor model show a high amplification of the therapeutic effects by combining magnetic concentration and photothermal actuation in the tumor, leading to a complete eradication of the tumors at ultralow nanoparticle and drug concentration (equivalent to only 1 mg/kg PLGA nanoparticles containing 8 μg/kg of paclitaxel, i.e., 100-500-fold lower than the therapeutic window of the free and PLGA encapsulated drug and 13-3000-fold lower than current nanotherapies combining paclitaxel and light actuation). These results highlight the strength of this externally controlled and amplified therapeutic approach, which could be applied to locally boost a wide variety of drugs for different diseases., This work was financially supported by the European Research Council (ERC-StG) under the European union’s horizon 2020 research and innovation program, ERC proof of concept grant (ERC-2022-PoC1). We acknowledge financial support from grants No MAT2016-77391-R, PID2019-106229RB-I00,PID2020-116844RB-C21,PGC2018-095032-B-100, PCIN2016-093 (M-ERA-NET), RTI2018-095495-J-I00, and RYC2019-027449-I funded by MCIN/AEI/10.13039/501100011033. We thank the Ramon Areces foundation through grant CIVP19A5922. The funding from Generalitat de Catalunya through the 2017-SGR-292 project is also acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the SEV-2017-0706 grant funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Soft Optomechanical Systems for Sensing, Modulation, and Actuation

  • Pujol-Vila, Ferrán
  • Güell-Grau, Pau
  • Nogués, Josep
  • Álvarez, Mar
  • Sepúlveda, Borja
Soft optomechanical systems have the ability to reversibly respond to optical and mechanical external stimuli by changing their own properties (e.g., shape, size, viscosity, stiffness, color or transmittance). These systems typically combine the optical properties of plasmonic, dielectric or carbon-based nanomaterials with the high elasticity and deformability of soft polymers, thus opening the path for the development of new mechanically tunable optical systems, sensors, and actuators for a wide range of applications. This review focuses on the recent progresses in soft optomechanical systems, which are here classified according to their applications and mechanisms of optomechanical response. The first part summarizes the soft optomechanical systems for mechanical sensing and optical modulation based on the variation of their optical response under external mechanical stimuli, thereby inducing mechanochromic or intensity modulation effects. The second part describes the soft optomechanical systems for the development of light induced mechanical actuators based on different actuation mechanisms, such as photothermal effects and phase transitions, among others. The final section provides a critical analysis of the main limitations of current soft optomechanical systems and the progress that is required for future devices., The authors acknowledge the financial support from grant nos. MAT2016-77391-R, PID2019-106229RB-I00, and PCIN2016-093 (M-ERA-NET) funded by MCIN/AEI/10.13039/501100011033, and grant nos. RTI2018-096786-B-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. The funding from Generalitat de Catalunya through the 2017-SGR-292 project is also acknowledged. ICN2 was funded by the CERCA programme/Generalitat de Catalunya. The ICN2 was supported by the SEV-2017-0706 grant funded by MCIN/AEI/10.13039/501100011033. F.P.-V. acknowledge funding from the European Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement no. 801342 (Tecniopring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ) (TECSPR19-1-0021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron oxide nanoparticles (Fe3O4, γ-Fe2O3 and FeO) as photothermal heat mediators in the first, second and third biological windows

  • Roca, Alejandro G.
  • López-Barbera, José Francisco
  • Lafuente, Aritz
  • Özel, Fatmahan
  • Fantechi, Elvira
  • Muro-Cruces, Javier
  • Hémadi, Miryana
  • Sepúlveda, Borja
  • Nogués, Josep
Nanotherapies are gaining increased interest for the treatment diverse diseases, particularly cancer, since they target the affected area directly, presenting higher efficacy and reduced side effects than traditional therapies. A promising nanotherapy approach is hyperthermia, where the nanoparticle can induce a local temperature increase by an external stimulus in the sick tissue to selectively kill the malignant cells. Among the diverse hyperthermia methods, photothermia is based on the absorption of light by the nanoparticles and further conversion into heat. Within the very wide range of nanostructured photothermal agents, iron oxides offer remarkable features since they are already approved by the FDA/EMA for various biomedical applications, they are biodegradable, easily manipulated using magnetic fields and can be imaged by diverse techniques. Here, we summarize the advantages of using the second biological window, both from the perspective of the skin and the optical properties of iron oxides. Further, we review the photothermal performance of iron oxide nanoparticles in the first, second and third biological windows. Overall, the results show that, for different types of iron oxide nanoparticles (Fe3O4, γ-Fe2O3, wüstite-FeO), both the heating capacity (i.e., induced temperature increase) and the photothermal conversion efficiency, n, vary in a complex way with the light wavelength, depending critically on the measurement conditions and physiochemical properties of the materials. Despite the spread in the reported photothermal properties of iron oxides, Fe3O4 particles tend to perform better than their γ-Fe2O3 counterparts, particularly in the second biological window. Interestingly, FeO, which has not been exploited so far from a photothermal perspective, shows very appealing absorption properties. Our preliminary studies using FeO/Fe3O4 core/shell nanoparticles evidence that they have excellent photothermal properties, outperforming Fe3O4 in both first and second biological windows. Finally, some applications beyond cancer treatment of iron oxide nanoparticles, exploiting the enhanced properties in the second spectral window, are discussed., This work was financially supported form grants No MAT2016-77391-R, PID2019-106229RB-I00, PDC2021-121303-I00, PDC2022-133036-I00, RTI2018-095495-J-I00 and RYC2019-027449-I funded by MCIN/AEI/10.13039/501100011033. We thank the Ramon Areces foundation through grant CIVP19A5922. Funding from Generalitat de Catalunya through the 2021-SGR-00651 project is also acknowledged. FÖ acknowledges the support of TUBITAK (The Scientific and Technological Research Council of Turkey) through the Project No. 1059B192000021. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors thank Iris Nogués for preparing Fig. 1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modular drug-loaded nanocapsules with metal dome layers as a platform for obtaining synergistic therapeutic biological activities

  • Fluksman, Arnon
  • Lafuente, Aritz
  • Braunstein, Ron
  • Steinberg, Eliana
  • Friedman, Nethanel
  • Yekhin, Zhanna
  • Roca, Alejandro G.
  • Nogués, Josep
  • Hazan, Ronen
  • Sepúlveda, Borja
  • Benny, Ofra
Multifunctional drug-loaded polymer-metal nanocapsules have attracted increasing attention in drug delivery due to their multifunctional potential endowed by drug activity and response to physicochemical stimuli. Current chemical synthesis methods of polymer/metal capsules require specific optimization of the different components to produce particles with precise properties, being particularly complex for Janus structures combining polymers and ferromagnetic and highly reactive metals. With the aim to generate tunable synergistic nanotherapeutic actuation with enhanced drug effects, here we demonstrate a versatile hybrid chemical/physical fabrication strategy to incorporate different functional metals with tailored magnetic, optical, or chemical properties on solid drug-loaded polymer nanoparticles. As archetypical examples, we present poly(lactic-co-glycolic acid) (PLGA) nanoparticles (diameters 100-150 nm) loaded with paclitaxel, indocyanine green, or erythromycin that are half-capped by either Fe, Au, or Cu layers, respectively, with application in three biomedical models. The Fe coating on paclitaxel-loaded nanocapsules permitted efficient magnetic enhancement of the cancer spheroid assembly, with 40% reduction of the cross-section area after 24 h, as well as a higher paclitaxel effect. In addition, the Fe-PLGA nanocapsules enabled external contactless manipulation of multicellular cancer spheroids with a speed of 150 μm/s. The Au-coated and indocyanine green-loaded nanocapsules demonstrated theranostic potential and enhanced anticancer activity in vitro and in vivo due to noninvasive fluorescence imaging with long penetration near-infrared (NIR) light and simultaneous photothermal-photodynamic actuation, showing a 3.5-fold reduction in the tumor volume growth with only 5 min of NIR illumination. Finally, the Cu-coated erythromycin-loaded nanocapsules exhibited enhanced antibacterial activity with a 2.5-fold reduction in the MIC50 concentration with respect to the free or encapsulated drug. Altogether, this technology can extend a nearly unlimited combination of metals, polymers, and drugs, thus enabling the integration of magnetic, optical, and electrochemical properties in drug-loaded nanoparticles to externally control and improve a wide range of biomedical applications., This work was financially supported by the European Research Council (ERC-StG) under the European Union’s Horizon 2020 Research and Innovation Program (Grant Agreement No. 0305260), the ERC proof of concept grant (ERC-2022-PoC1) (Grant Agreement No. 756762), and the M-ERA.NET transnational grant. We acknowledge funding from Generalitat de Catalunya through the 2017-SGR-292 and 2021-SGR-0065 projects. We acknowledge the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) through the MAT2016-77391-R, PDC2022-133036-I00, PID2019- 106229RB-I00, PCIN2016-093 (M-ERA-NET), RTI2018-095495-J-I00, and RYC2019-027449-I funded by MCIN/AEI/10.13039/501100011033. We thank the Ramon Areces foundation through grant CIVP19A5922. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 has been supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706] and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN/AEI/10.13039.501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrabroadband light absorbing Fe/polymer flexible metamaterial for soft opto-mechanical devices

  • Güell-Grau, Pau
  • Pi, Francesc
  • Villa, Rosa
  • Nogués, Josep
  • Alvarez, Mar
  • Sepúlveda, Borja
Ultrabroadband light absorbers are attracting increasing interest for applications in energy harvesting, photodetection, self-regulated devices or soft robotics. However, current absorbers show detrimental insufficient absorption spectral range, or light angle and polarization dependence. Here we show that the unexplored optical properties of highly-damped plasmonic materials combined with the infrared absorption of thin polymer films enable developing ultrabroadband light-absorbing soft metamaterials. The developed metamaterial, composed of a nanostructured Fe layer mechanically coupled to a thin polydimethylsiloxane (PDMS) film, shows unprecedented ultrabroadband and angle-independent optical absorption (averaging 84% within 300–18000 nm). The excellent photothermal efficiency and large thermal-expansion mismatch of the metamaterial is efficiently transformed into large mechanical deflections, which we exploit to show an artificial iris that self-regulates the transmitted light power from the ultraviolet to the long-wave infrared, an untethered light-controlled mechanical gripper and a light-triggered electrical switch., We acknowledge funding from Generalitat de Catalunya through the 2017-SGR-292 project. The funding from the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) through the MAT2016-77391-R, PID2019-106229RB-I00, PCIN2016-093 (M-ERA-NET), DPI2015-68197-R and DPI2015-72948-EXP projects and Ramon y Cajal Fellowship (RyC2013-14479) is acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design strategies for shape-controlled magnetic iron oxide nanoparticles

  • Roca, A.G.
  • Gutiérrez, L.
  • Gavilán, H.
  • Fortes Brollo, M.E.
  • Veintemillas-Verdaguer, S.
  • Morales, M.D.P.
Ferrimagnetic iron oxide nanoparticles (magnetite or maghemite) have been the subject of an intense research, not only for fundamental research but also for their potentiality in a widespread number of practical applications. Most of these studies were focused on nanoparticles with spherical morphology but recently there is an emerging interest on anisometric nanoparticles. This review is focused on the synthesis routes for the production of uniform anisometric magnetite/maghemite nanoparticles with different morphologies like cubes, rods, disks, flowers and many others, such as hollow spheres, worms, stars or tetrapods. We critically analyzed those procedures, detected the key parameters governing the production of these nanoparticles with particular emphasis in the role of the ligands in the final nanoparticle morphology. The main structural and magnetic features as well as the nanotoxicity as a function of the nanoparticle morphology are also described. Finally, the impact of each morphology on the different biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) are analysed in detail. We would like to dedicate this work to Professor Carlos J. Serna, Instituto de Ciencia de Materiales de Madrid, ICMM/CSIC, for his outstanding contribution in the field of monodispersed colloids and iron oxide nanoparticles. We would like to express our gratitude for all these years of support and inspiration on the occasion of his retirement.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Combining X-Ray Whole Powder Pattern Modeling, Rietveld and Pair Distribution Function Analyses as a Novel Bulk Approach to Study Interfaces in Heteronanostructures, Oxidation Front in FeO/Fe3O4 Core/Shell Nanoparticles as a Case Study

  • Ichikawa, Rodrigo U.|||0000-0002-7661-9999
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Peral Alonso, Inmaculada|||0000-0002-6994-1277
  • Turrillas, Xabier|||0000-0002-3419-2229
  • Nogués, Josep|||0000-0003-4616-1371
Understanding the microstructure in heterostructured nanoparticles is crucial to harnessing their properties. Although microscopy is ideal for this purpose, it allows for the analysis of only a few nanoparticles. Thus, there is a need for structural methods that take the whole sample into account. Here, a novel bulk-approach based on the combined analysis of synchrotron X-ray powder diffraction with whole powder pattern modeling, Rietveld and pair distribution function is presented. The microstructural temporal evolution of FeO/FeO core/shell nanocubes is studied at different time intervals. The results indicate that a two-phase approach (FeO and FeO) is not sufficient to successfully fit the data and two additional interface phases (FeO and FeO) are needed to obtain satisfactory fits, i.e., an onion-type structure. The analysis shows that the FeO phases grow to some extent (≈1 nm) at the expense of the FeO core. Moreover, the FeO core progressively changes its stoichiometry to accommodate more oxygen. The temporal evolution of the parameters indicates that the structure of the FeO/FeO nanocubes is rather stable, although the exact interface structure slightly evolves with time. This approach paves the way for average studies of interfaces in different kinds of heterostructured nanoparticles, particularly in cases where spectroscopic methods have some limitations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Simultaneous Local Heating/Thermometry Based on Plasmonic Magnetochromic Nanoheaters, Simultaneous local nano-heating/thermometry based on plasmonic magnetochromic nanodomes

  • Li, Zhi
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Tajada Herraiz, José Luis
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Vavassori, Paolo
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
A crucial challenge in nanotherapies is achieving accurate and real-time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic-induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60-fold smaller than state-of-the-art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real-time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state-of-the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Design strategies for shape-controlled magnetic iron oxide nanoparticles

  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Gutiérrez, Lucía|||0000-0003-2366-3598
  • Gavilán, Helena
  • Fortes Brollo, Maria Eugênia
  • Veintemillas Verdaguer, Sabino
  • Morales, María del Puerto|||0000-0002-7290-7029
Ferrimagnetic iron oxide nanoparticles (magnetite or maghemite) have been the subject of an intense research, not only for fundamental research but also for their potentiality in a widespread number of practical applications. Most of these studies were focused on nanoparticles with spherical morphology but recently there is an emerging interest on anisometric nanoparticles. This review is focused on the synthesis routes for the production of uniform anisometric magnetite/maghemite nanoparticles with different morphologies like cubes, rods, disks, flowers and many others, such as hollow spheres, worms, stars or tetrapods. We critically analyzed those procedures, detected the key parameters governing the production of these nanoparticles with particular emphasis in the role of the ligands in the final nanoparticle morphology. The main structural and magnetic features as well as the nanotoxicity as a function of the nanoparticle morphology are also described. Finally, the impact of each morphology on the different biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) are analysed in detail. We would like to dedicate this work to Professor Carlos J. Serna, Instituto de Ciencia de Materiales de Madrid, ICMM/CSIC, for his outstanding contribution in the field of monodispersed colloids and iron oxide nanoparticles. We would like to express our gratitude for all these years of support and inspiration on the occasion of his retirement.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Tajada Herraiz, José Luis
  • Pou Macayo, Laia
  • Lope-Piedrafita, Silvia|||0000-0002-8127-6425
  • Pi, F.|||0000-0001-7347-4897
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Atomic-Scale Determination of Cation Inversion in Spinel-Based Oxide Nanoparticles

  • Torruella, Pau
  • Ruiz Caridad, Alicia
  • Walls, Michael
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Blanco Portals, Javier|||0000-0002-7037-269X
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Nogués, Josep|||0000-0003-4616-1371
  • Peiro, Francesca|||0000-0002-5697-0554
  • Estrade, Sonia|||0000-0002-3340-877X
The atomic structure of nanoparticles can be easily determined by transmission electron microscopy. However, obtaining atomic-resolution chemical information about the individual atomic columns is a rather challenging endeavor. Here, crystalline monodispersed spinel FeO/MnO core-shell nanoparticles have been thoroughly characterized in a high-resolution scanning transmission electron microscope. Electron energy-loss spectroscopy (EELS) measurements performed with atomic resolution allow the direct mapping of the Mn/Mn ions in the shell and the Fe/Fe in the core structure. This enables a precise understanding of the core-shell interface and of the cation distribution in the crystalline lattice of the nanoparticles. Considering how the different oxidation states of transition metals are reflected in EELS, two methods of performing a local evaluation of the cation inversion in spinel lattices are introduced. Both methods allow the determination of the inversion parameter in the iron oxide core and manganese oxide shell, as well as detecting spatial variations in this parameter, with atomic resolution. X-ray absorption measurements on the whole sample confirm the presence of cation inversion. These results present a significant advance toward a better correlation of the structural and functional properties of nanostructured spinel oxides.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Seeded Growth Synthesis of Au-Fe3O4 Heterostructured Nanocrystals, Rational Design and Mechanistic Insights

  • Fantechi, Elvira|||0000-0002-9323-2198
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Torruella, Pau
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Coy, Emerson|||0000-0002-4149-9720
  • Jurga, Stefan
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Nogués, Josep|||0000-0003-4616-1371
  • Puntes, Víctor|||0000-0001-8996-9499
Multifunctional hybrid nanoparticles comprising two or more entities with different functional properties are gaining ample significance in industry and research. Due to its combination of properties, a particularly appealing example is Au-FeO composite nanoparticles. Here we present an in-depth study of the synthesis of Au-FeO heterostructured nanocrystals (HNCs) by thermal decomposition of iron precursors in the presence of preformed 10 nm Au seeds. The role of diverse reaction parameters on the HNCs formation was investigated using two different precursors: iron pentacarbonyl (Fe(CO)) and iron acetylacetonate (Fe(acac)). The reaction conditions promoting the heterogeneous nucleation of FeO onto Au seeds were found to significantly differ depending on the precursor chosen, where Fe(acac) is considerably more sensitive to the variation of the parameters than Fe(CO) and more subject to homogeneous nucleation processes with the consequent formation of isolated iron oxide nanocrystals (NCs). The role of the surfactants was also crucial in the formation of well-defined and monodisperse HNCs by regulating the access to the Au surface. Similarly, the variations of the [Fe]/[Au] ratio, temperature, and employed solvent were found to act on the mean size and the morphology of the obtained products. Importantly, while the optical properties are rather sensitive to the final morphology, the magnetic ones are rather similar for the different types of obtained HNCs. The surface functionalization of dimer-like HNCs with silica allows their dispersion in aqueous media, opening the path to their use in biomedical applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Precise Size Control of the Growth of Fe3O4 Nanocubes over a Wide Size Range Using a Rationally Designed One-Pot Synthesis

  • Muro Cruces, Javier
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Fantechi, Elvira|||0000-0002-9323-2198
  • Del Pozo Bueno, Daniel|||0000-0003-1819-298X
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Pineider, Francesco|||0000-0003-4066-4031
  • Sangregorio, Claudio|||0000-0002-2655-3901
  • Nogués, Josep|||0000-0003-4616-1371
The physicochemical properties of spinel oxide magnetic nanoparticles depend critically on both their size and shape. In particular, spinel oxide nanocrystals with cubic morphology have shown superior properties in comparison to their spherical counterparts in a variety of fields, like, for example, biomedicine. Therefore, having an accurate control over the nanoparticle shape and size, while preserving the crystallinity, becomes crucial for many applications. However, despite the increasing interest in spinel oxide nanocubes there are relatively few studies on this morphology due to the difficulty to synthesize perfectly defined cubic nanostructures, especially below 20 nm. Here we present a rationally designed synthesis pathway based on the thermal decomposition of iron(III) acetylacetonate to obtain high quality nanocubes over a wide range of sizes. This pathway enables the synthesis of monodisperse FeO nanocubes with edge length in the 9-80 nm range, with excellent cubic morphology and high crystallinity by only minor adjustments in the synthesis parameters. The accurate size control provides evidence that even 1-2 nm size variations can be critical in determining the functional properties, for example, for improved nuclear magnetic resonance T contrast or enhanced magnetic hyperthermia. The rationale behind the changes introduced in the synthesis procedure (e.g., the use of three solvents or adding Na-oleate) is carefully discussed. The versatility of this synthesis route is demonstrated by expanding its capability to grow other spinel oxides such as Co-ferrites, Mn-ferrites, and MnO of different sizes. The simplicity and adaptability of this synthesis scheme may ease the development of complex oxide nanocubes for a wide variety of applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Remanence plots as a probe of spin disorder in magnetic nanoparticles

  • De Toro, José A.|||0000-0002-9075-1697
  • Vasilakaki, Marianna
  • Lee, Su Seong
  • Andersson, Mikael S.
  • Normile, Peter S.
  • Yaacoub, Nader
  • Murray, Peyton D.|||0000-0003-0389-0611
  • Sánchez, Elena H.|||0000-0001-5737-0035
  • Muñiz, Pablo
  • Peddis, Davide|||0000-0003-0810-8860
  • Mathieu, Roland|||0000-0002-5261-2047
  • Liu, Kai|||0000-0001-9413-6782
  • Geshev, Julian|||0000-0003-3730-3657
  • Trohidou, Kalliopi N.
  • Nogués, Josep|||0000-0003-4616-1371
Remanence magnetization plots (e.g., Henkel or δM plots) have been extensively used as a straightforward way to determine the presence and intensity of dipolar and exchange interactions in assemblies of magnetic nanoparticles or single domain grains. Their evaluation is particularly important in functional materials whose performance is strongly affected by the intensity of interparticle interactions, such as patterned recording media and nanostructured permanent magnets, as well as in applications such as hyperthermia and magnetic resonance imaging. Here, we demonstrate that δM plots may be misleading when the nanoparticles do not have a homogeneous internal magnetic configuration. Substantial dips in the M plots of γ-FeO nanoparticles isolated by thick SiO shells indicate the presence of demagnetizing interactions, usually identified as dipolar interactions. Our results, however, demonstrate that it is the inhomogeneous spin structure of the nanoparticles, as most clearly evidenced by Mössbauer measurements, that has a pronounced effect on the δM plots, leading to features remarkably similar to those produced by dipolar interactions. X-ray diffraction results combined with magnetic characterization indicate that this inhomogeneity is due to the presence of surface structural (and spin) disorder. Monte Carlo simulations unambiguously corroborate the critical role of the internal magnetic structure in the δM plots. Our findings constitute a cautionary tale on the widespread use of remanence plots to assess interparticle interactions as well as offer new perspectives in the use of Henkel and δM plots to quantify the rather elusive inhomogeneous magnetization states in nanoparticles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Novel Ba-hexaferrite structural variations stabilized on the nanoscale as building blocks for epitaxial bi-magnetic hard/soft sandwiched maghemite/hexaferrite/maghemite nanoplatelets with out-of-plane easy axis and enhanced magnetization

  • Belec, B.
  • Dražić, G.
  • Gyergyek, Sašo|||0000-0002-7325-2984
  • Podmiljšak, B.
  • Goršak, T.
  • Komelj, M.
  • Nogués, Josep|||0000-0003-4616-1371
  • Makovec, Darko|||0000-0002-0190-6758
Atomic-resolution scanning-transmission electron microscopy showed that barium hexaferrite (BHF) nanoplatelets display a distinct structure, which represents a novel structural variation of hexaferrites stabilized on the nanoscale. The structure can be presented in terms of two alternating structural blocks stacked across the nanoplatelet: a hexagonal (BaFeO) R block and a cubic (FeO) spinel S block. The structure of the BHF nanoplatelets comprises only two, or rarely three, R blocks and always terminates at the basal surfaces with the full S blocks. The structure of a vast majority of the nanoplatelets can be described with a SR∗S∗RS stacking order, corresponding to a BaFeO composition. The nanoplatelets display a large, uniaxial magnetic anisotropy with the easy axis perpendicular to the platelet, which is a crucial property enabling different novel applications based on aligning the nanoplatelets with applied magnetic fields. However, the BHF nanoplatelets exhibit a modest saturation magnetization, M, of just over 30 emu g. Given the cubic S block termination of the platelets, layers of maghemite, γ-FeO, (M), with a cubic spinel structure, can be easily grown epitaxially on the surfaces of the platelets, forming a sandwiched M/BHF/M platelet structure. The exchange-coupled composite nanoplatelets exhibit a remarkably uniform structure, with an enhanced M of more than 50 emu g while essentially maintaining the out-of-plane easy axis. The enhanced M could pave the way for their use in diverse platelet-based magnetic applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling a New High-Temperature Ordered Magnetic Phase in ϵ-Fe2O3

  • García-Muñoz, José Luis|||0000-0002-4174-2794
  • Romaguera, Arnau
  • Fauth, François|||0000-0001-9465-3106
  • Nogués, Josep|||0000-0003-4616-1371
  • Gich, Martí|||0000-0001-9958-0057
Iron oxides are among the most abundant materials on Earth, and yet there are some of their basic properties which are still not well-established. Here, we present temperature-dependent magnetic, X-ray, and neutron diffraction measurements refuting the current belief that the magnetic ordering temperature of ϵ-FeO is ∼500 K, i.e., well below that of other iron oxides such as hematite, magnetite, or maghemite. Upon heating from room temperature, the ϵ-FeO nanoparticles' saturation magnetization undergoes a monotonic decrease while the coercivity and remanence sharply drop, virtually vanishing around ∼500 K. However, above that temperature the hysteresis loops present a nonlinear response with finite coercivity, making evident signs of ferrimagnetic order up to temperatures as high as 850 K (T). The neutron diffraction study confirms the presence of ferrimagnetic order well above 500 K with Pna'2' magnetic symmetry, but only involving two of the four Fe sublattices which are ordered below T ≈ 480 K, and with a reduced net ferromagnetic component, that vanishes at above 850 K. The results unambiguously show the presence of a high-temperature magnetic phase in ϵ-FeO with a critical temperature of T ∼ 850 K. Importantly, this temperature is similar to the Curie point in other iron oxides, indicating comparable magnetic coupling strengths. The presence of diverse magnetic phases is further supported by the nonmonotonic evolution of the thermal expansion. The existence of a high-temperature ferrimagnetic phase in ϵ-FeO may open the door to further expand the working range of this multifunctional iron oxide.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-assembly of mechanoplasmonic bacterial cellulose-metal nanoparticle composites

  • Eskilson, Olof|||0000-0002-1636-8710
  • Lindström, Stefan|||0000-0002-1503-8293
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Shahjamali, Mohammad M.
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Sivlér, Petter
  • Skog, Marten
  • Aronsson, Christopher|||0000-0001-7921-8915
  • Björk, Emma M.
  • Nyberg, Niklas
  • Khalaf, Hazem
  • Bengtsson, Torbjörn
  • James, Jeemol
  • Ericson, Marica B.|||0000-0002-5987-5915
  • Martinsson, Erik
  • Selegård, Robert|||0000-0002-1781-1489
  • Aili, Daniel|||0000-0002-7001-9415
Nanocomposites of metal nanoparticles (NPs) and bacterial nanocellulose (BC) enable fabrication of soft and biocompatible materials for optical, catalytic, electronic, and biomedical applications. Current BC-NP nanocomposites are typically prepared by in situ synthesis of the NPs or electrostatic adsorption of surface functionalized NPs, which limits possibilities to control and tune NP size, shape, concentration, and surface chemistry and influences the properties and performance of the materials. Here a self-assembly strategy is described for fabrication of complex and well-defined BC-NP composites using colloidal gold and silver NPs of different sizes, shapes, and concentrations. The self-assembly process results in nanocomposites with distinct biophysical and optical properties. In addition to antibacterial materials and materials with excellent senor performance, materials with unique mechanoplasmonic properties are developed. The homogenous incorporation of plasmonic gold NPs in the BC enables extensive modulation of the optical properties by mechanical stimuli. Compression gives rise to near-field coupling between adsorbed NPs, resulting in tunable spectral variations and enhanced broadband absorption that amplify both nonlinear optical and thermoplasmonic effects and enables novel biosensing strategies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Simultaneous individual and dipolar collective properties in binary assemblies of magnetic nanoparticles

  • Sánchez, Elena H.|||0000-0001-5737-0035
  • Vasilakaki, Marianna
  • Lee, Su Seong
  • Normile, Peter S.
  • Muscas, Giuseppe
  • Murgia, Massimiliano
  • Andersson, Mikael S.
  • Singh, Gurvinder
  • Mathieu, Roland|||0000-0002-5261-2047
  • Nordblad, Per
  • Ricci, Pier Carlo|||0000-0001-6191-4613
  • Peddis, Davide|||0000-0003-0810-8860
  • Trohidou, Kalliopi N.
  • Nogués, Josep|||0000-0003-4616-1371
  • De Toro, José A.|||0000-0002-9075-1697
Applications based on aggregates of magnetic nanoparticles are becoming increasingly widespread, ranging from hyperthermia to magnetic recording. However, although some uses require collective behavior, others need a more individual-like response, the conditions leading to either of these behaviors are still poorly understood. Here, we use nanoscale-uniform binary random dense mixtures with different proportions of oxide magnetic nanoparticles with low/high anisotropy as a valuable tool to explore the crossover from individual to collective behavior. Two different anisotropy scenarios have been studied in two series of binary compacts: M1, comprising maghemite (γ-Fe2O3) nanoparticles of different sizes (9.0 nm/11.5 nm) with barely a factor of 2 between their anisotropy energies, and M2, mixing equally sized pure maghemite (low-anisotropy) and Co-doped maghemite (high-anisotropy) nanoparticles with a large difference in anisotropy energy (ratio.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Probing the meta-stability of oxide core/shell nanoparticle systems at atomic resolution

  • Roldan, Manuel A.
  • Mayence, Arnaud
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Ishikawa, Ryo
  • Salafranca, Juan
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Baró, M. D.|||0000-0002-8636-1063
  • Nogués, Josep|||0000-0003-4616-1371
  • Pennycook, Stephen J.
  • Varela del Arco, María|||0000-0002-6582-7004
Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their properties. In this work, the in-situ electron-induced selective reduction of Mn₃O₄ to MnO is studied in magnetic Fe₃O₄/Mn₃O₄ and Mn₃O₄/Fe₃O₄ core/shell nanoparticles by means of high-resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Such in-situ transformation allows mimicking the actual processes in operando environments. A multi-stage image analysis using geometric phase analysis combined with particle image velocity enables direct monitoring of the relationship between structure, chemical composition and strain relaxation during the Mn₃O₄ reduction. In the case of Fe₃O₄/Mn₃O₄ core/shell the transformation occurs smoothly without the formation of defects. However, for the inverse Mn₃O₄/Fe₃O₄O core/shell configuration the electron beam-induced transformation occurs in different stages that include redox reactions and void formation followed by strain field relaxation via formation of defects. This study highlights the relevance of understanding the local dynamics responsible for changes in the particle composition in order to control stability and, ultimately, macroscopic functionality.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mechanochromic detection for soft opto-magnetic actuators

  • Güell Grau, Pau|||0000-0002-2363-4079
  • Escudero Villa, Pedro Fernando|||0000-0003-0534-2328
  • Perdikos, Filippos Giannis
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Pascual-Izarra, Carlos
  • Villa, Rosa|||0000-0003-2735-3204
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Alvarez, Mar|||0000-0003-4590-4401
New multi-stimuli responsive materials are required in smart systems applications to overcome current limitations in remote actuation and to achieve versatile operation in inaccessible environments. The incorporation of detection mechanisms to quantify in real time the response to external stimuli is crucial for the development of automated systems. Here, we present the first wireless opto-magnetic actuator with mechanochromic response. The device, based on a nanostructured-iron (Fe) layer transferred onto suspended elastomer structures with a periodically corrugated backside, can be actuated both optically (in a broadband spectral range) and magnetically. The combined opto-magnetic stimulus can accurately modulate the mechanical response (strength and direction) of the device. The structural coloration generated at the corrugated back surface enables to easily map and quantify, in 2D, the mechanical deflections by analyzing in real time the hue changes of images taken using a conventional RGB smartphone camera, with a precision of 0.05°. We demonstrate the independent and synergetic optical and magnetic actuation and detection with a detection limit of 1.8 mW·cm -2 and 0.34 mT, respectively. The simple operation, versatility, and cost-effectiveness of the wireless multiactuated device with highly sensitive mechanochromic mapping paves the way to a new generation of wirelessly controlled smart systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrabroadband light absorbing Fe/polymer flexible metamaterial for soft opto-mechanical devices

  • Güell Grau, Pau|||0000-0002-2363-4079
  • Pi, F.|||0000-0001-7347-4897
  • Villa, Rosa|||0000-0003-2735-3204
  • Nogués, Josep|||0000-0003-4616-1371
  • Alvarez, Mar|||0000-0003-4590-4401
  • Sepúlveda, Borja|||0000-0002-1562-7602
Ultrabroadband light absorbers are attracting increasing interest for applications in energy harvesting, photodetection, self-regulated devices or soft robotics. However, current absorbers show detrimental insufficient absorption spectral range, or light angle and polarization dependence. Here we show that the unexplored optical properties of highly-damped plasmonic materials combined with the infrared absorption of thin polymer films enable developing ultrabroadband light-absorbing soft metamaterials. The developed metamaterial, composed of a nanostructured Fe layer mechanically coupled to a thin polydimethylsiloxane (PDMS) film, shows unprecedented ultrabroadband and angle-independent optical absorption (averaging 84% within 300-18000 nm). The excellent photothermal efficiency and large thermal-expansion mismatch of the metamaterial is efficiently transformed into large mechanical deflections, which we exploit to show an artificial iris that self-regulates the transmitted light power from the ultraviolet to the long-wave infrared, an untethered light-controlled mechanical gripper and a light-triggered electrical switch.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Efficient tumor eradication at ultralow drug concentration via externally controlled and boosted metallic iron magnetoplasmonic nanocapsules

  • Fluksman, Arnon|||0000-0003-1057-6209
  • Lafuente, Aritz|||0000-0002-1497-5744
  • Li, Zhi
  • Sort, Jordi|||0000-0003-1213-3639
  • Lope-Piedrafita, Silvia|||0000-0002-8127-6425
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Nogués, Josep|||0000-0003-4616-1371
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Benny, Ofra|||0000-0002-2468-5978
  • Sepúlveda, Borja|||0000-0002-1562-7602
With the aim to locally enhance the efficacy of cancer nanotherapies, here we present metal iron based magnetoplasmonic drug-loaded nanocapsules (MAPSULES), merging powerful external magnetic concentration in the tumor and efficient photothermal actuation to locally boost the drug therapeutic action at ultralow drug concentrations. The MAPSULES are composed of paclitaxel-loaded polylactic-co-glycolic acid (PLGA) nanoparticles partially coated by a nanodome shape iron/silica semishell. The iron semishell has been designed to present a ferromagnetic vortex for incorporating a large quantity of ferromagnetic material while maintaining high colloidal stability. The large iron semishell provides very strong magnetic manipulation via magnetophoretic forces, enabling over 10-fold higher trapping efficiency in microfluidic channels than typical superparamagnetic iron oxide nanoparticles. Moreover, the iron semishell exhibits highly damped plasmonic behavior, yielding intense broadband absorbance in the near-infrared biological windows and photothermal efficiency similar to the best plasmonic nanoheaters. The in vivo therapeutic assays in a mouse xenograft tumor model show a high amplification of the therapeutic effects by combining magnetic concentration and photothermal actuation in the tumor, leading to a complete eradication of the tumors at ultralow nanoparticle and drug concentration (equivalent to only 1 mg/kg PLGA nanoparticles containing 8 μg/kg of paclitaxel, i.e., 100-500-fold lower than the therapeutic window of the free and PLGA encapsulated drug and 13-3000-fold lower than current nanotherapies combining paclitaxel and light actuation). These results highlight the strength of this externally controlled and amplified therapeutic approach, which could be applied to locally boost a wide variety of drugs for different diseases.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Soft Optomechanical Systems for Sensing, Modulation, and Actuation

  • Pujol Vila, Ferran|||0000-0002-6811-2426
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Nogués, Josep|||0000-0003-4616-1371
  • Alvarez, Mar|||0000-0003-4590-4401
  • Sepúlveda, Borja|||0000-0002-1562-7602
Soft optomechanical systems have the ability to reversibly respond to optical and mechanical external stimuli by changing their own properties (e.g., shape, size, viscosity, stiffness, color or transmittance). These systems typically combine the optical properties of plasmonic, dielectric or carbon-based nanomaterials with the high elasticity and deformability of soft polymers, thus opening the path for the development of new mechanically tunable optical systems, sensors, and actuators for a wide range of applications. This review focuses on the recent progresses in soft optomechanical systems, which are here classified according to their applications and mechanisms of optomechanical response. The first part summarizes the soft optomechanical systems for mechanical sensing and optical modulation based on the variation of their optical response under external mechanical stimuli, thereby inducing mechanochromic or intensity modulation effects. The second part describes the soft optomechanical systems for the development of light induced mechanical actuators based on different actuation mechanisms, such as photothermal effects and phase transitions, among others. The final section provides a critical analysis of the main limitations of current soft optomechanical systems and the progress that is required for future devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Iron oxide nanoparticles (Fe3O4, γ-Fe2O3 and FeO) as photothermal heat mediators in the first, second and third biological windows

  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Lafuente, Aritz|||0000-0002-1497-5744
  • Özel, Fatmahan
  • Fantechi, Elvira|||0000-0002-9323-2198
  • Muro Cruces, Javier
  • Hémadi, M.
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Nogués, Josep|||0000-0003-4616-1371
Nanotherapies are gaining increased interest for the treatment diverse diseases, particularly cancer, since they target the affected area directly, presenting higher efficacy and reduced side effects than traditional therapies. A promising nanotherapy approach is hyperthermia, where the nanoparticle can induce a local temperature increase by an external stimulus in the sick tissue to selectively kill the malignant cells. Among the diverse hyperthermia methods, photothermia is based on the absorption of light by the nanoparticles and further conversion into heat. Within the very wide range of nanostructured photothermal agents, iron oxides offer remarkable features since they are already approved by the FDA/EMA for various biomedical applications, they are biodegradable, easily manipulated using magnetic fields and can be imaged by diverse techniques. Here, we summarize the advantages of using the second biological window, both from the perspective of the skin and the optical properties of iron oxides. Further, we review the photothermal performance of iron oxide nanoparticles in the first, second and third biological windows. Overall, the results show that, for different types of iron oxide nanoparticles (FeO, γ-FeO, wüstite-FeO), both the heating capacity (i.e., induced temperature increase) and the photothermal conversion efficiency, η, vary in a complex way with the light wavelength, depending critically on the measurement conditions and physiochemical properties of the materials. Despite the spread in the reported photothermal properties of iron oxides, FeO particles tend to perform better than their γ-FeO counterparts, particularly in the second biological window. Interestingly, FeO, which has not been exploited so far from a photothermal perspective, shows very appealing absorption properties. Our preliminary studies using FeO/FeO core/shell nanoparticles evidence that they have excellent photothermal properties, outperforming FeO in both first and second biological windows. Finally, some applications beyond cancer treatment of iron oxide nanoparticles, exploiting the enhanced properties in the second spectral window, are discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Modular Drug-Loaded Nanocapsules with Metal Dome Layers as a Platform for Obtaining Synergistic Therapeutic Biological Activities

  • Fluksman, Arnon|||0000-0003-1057-6209
  • Braunstein, Ron
  • Steinberg, Eliana
  • Friedman, Nethanel
  • Yekhin, Zhanna
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Nogués, Josep|||0000-0003-4616-1371
  • Hazan, Ronen
  • Sepúlveda Martínez, Borja
  • Benny, Ofra|||0000-0002-2468-5978
  • Lafuente, Aritz|||0000-0002-1497-5744
Multifunctional drug-loaded polymer-metal nanocapsules have attracted increasing attention in drug delivery due to their multifunctional potential endowed by drug activity and response to physicochemical stimuli. Current chemical synthesis methods of polymer/metal capsules require specific optimization of the different components to produce particles with precise properties, being particularly complex for Janus structures combining polymers and ferromagnetic and highly reactive metals. With the aim to generate tunable synergistic nanotherapeutic actuation with enhanced drug effects, here we demonstrate a versatile hybrid chemical/physical fabrication strategy to incorporate different functional metals with tailored magnetic, optical, or chemical properties on solid drug-loaded polymer nanoparticles. As archetypical examples, we present poly(lactic- co -glycolic acid) (PLGA) nanoparticles (diameters 100-150 nm) loaded with paclitaxel, indocyanine green, or erythromycin that are half-capped by either Fe, Au, or Cu layers, respectively, with application in three biomedical models. The Fe coating on paclitaxel-loaded nanocapsules permitted efficient magnetic enhancement of the cancer spheroid assembly, with 40% reduction of the cross-section area after 24 h, as well as a higher paclitaxel effect. In addition, the Fe-PLGA nanocapsules enabled external contactless manipulation of multicellular cancer spheroids with a speed of 150 μm/s. The Au-coated and indocyanine green-loaded nanocapsules demonstrated theranostic potential and enhanced anticancer activity in vitro and in vivo due to noninvasive fluorescence imaging with long penetration near-infrared (NIR) light and simultaneous photothermal-photodynamic actuation, showing a 3.5-fold reduction in the tumor volume growth with only 5 min of NIR illumination. Finally, the Cu-coated erythromycin-loaded nanocapsules exhibited enhanced antibacterial activity with a 2.5-fold reduction in the MIC50 concentration with respect to the free or encapsulated drug. Altogether, this technology can extend a nearly unlimited combination of metals, polymers, and drugs, thus enabling the integration of magnetic, optical, and electrochemical properties in drug-loaded nanoparticles to externally control and improve a wide range of biomedical applications.