Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magnetoionics for Synaptic Devices and Neuromorphic Computing, Recent Advances, Challenges, and Future Perspectives

  • Peda, Monalisha|||0000-0002-3299-1254
  • Ameziane, Maria
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Pellicer, Eva|||0000-0002-8901-0998
  • Mansell, Rhodri
  • Menéndez, Enric|||0000-0003-3809-2863
  • Van Dijken, Sebastiaan|||0000-0001-6372-2252
  • Sort, Jordi|||0000-0003-1213-3639
With the advent of Big Data, traditional digital computing is struggling to cope with intricate tasks related to data classification or pattern recognition. To mitigate this limitation, software-based neural networks are implemented, but they are run in conventional computers whose operation principle (with separate memory and data-processing units) is highly inefficient compared to the human brain. Brain-inspired in-memory computing is achieved through a wide variety of methods, for example, artificial synapses, spiking neural networks, or reservoir computing. However, most of these methods use materials (e.g., memristor arrays, spintronics, phase change memories) operated with electric currents, resulting in significant Joule heating effect. Tuning magnetic properties by voltage-driven ion motion (i.e., magnetoionics) has recently emerged as an alternative energy-efficient approach to emulate functionalities of biological synapses: potentiation/depression, multilevel storage, or transitions from short-term to long-term plasticity. In this perspective, the use of magnetoionics in neuromorphic applications is critically reviewed, with emphasis on modulating synaptic weight through: 1) control of magnetization by voltage-induced ion retrieval/insertion; and 2) control of magnetic stripe domains and skyrmions in gated magnetic thin films adjacent to solid-state ionic supercapacitors. The potential prospects in this emerging research area together with a forward-looking discussion on future opportunities are provided.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrosynthesis-Induced Pt Skin Effect in Mesoporous Ni-Rich Ni-Pt Thin Films for Hydrogen Evolution Reaction

  • Eiler, Konrad|||0000-0001-8648-6395
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Döbeli, Max|||0000-0001-6839-7698
  • Müller, Arnold
  • Vockenhuber, Christof
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
A Pt skin effect, i.e., an enrichment of Pt within the first 1-2 nm from the surface, is observed in as-prepared electrodeposited Ni-rich Ni-Pt thin films. This effect, revealed by Rutherford backscattering (RBS), is present for both dense thin films and mesoporous thin films synthesized by micelle-assisted electrodeposition from a chloride-based electrolyte. Due to the Pt skin effect, the Ni-rich thin films show excellent stability at the hydrogen evolution reaction (HER) in acidic media, during which a gradient in the Pt/Ni ratio is established along the thickness of the thin films, while the activity at the HER remains unaffected by this structural change. Further characterization by elastic recoil detection with He ions analysis shows that hydrogen profiles are similar to those of Pt: a surface hydrogen peak coincides with the Pt skin, and a gradient in hydrogen concentration is established during HER in acidic media, together with a considerable uptake in hydrogen. A comparative study shows that in alkaline media, hydrogen evolution has little to no effect on the structural properties of the thin films, even for much longer times of exposure. The mesoporous thin films, in addition to their higher efficiency at HER compared to dense thin films, also show lower internal stress, as determined by Rietveld refinement of grazing incidence X-ray diffraction patterns. The latter also reveal a fully single-phase and nanocrystalline structure for all thin films with varying Ni contents.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Machine learning applications on lunar meteorite minerals, From classification to mechanical properties prediction

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Trigo-Rodríguez, Josep M.
  • Sort, Jordi|||0000-0003-1213-3639
  • Ibañez-Insa, Jordi|||0000-0002-8909-6541
  • Rimola, Albert|||0000-0002-9637-4554
Amid the scarcity of lunar meteorites and the imperative to preserve their scientific value, non-destructive testing methods are essential. This translates into the application of microscale rock mechanics experiments and scanning electron microscopy for surface composition analysis. This study explores the application of Machine Learning algorithms in predicting the mineralogical and mechanical properties of DHOFAR 1084, JAH 838, and NWA 11444 lunar meteorites based solely on their atomic percentage compositions. Leveraging a prior-data fitted network model, we achieved near-perfect classification scores for meteorites, mineral groups, and individual minerals. The regressor models, notably the K-Neighbor model, provided an outstanding estimate of the mechanical properties-previously measured by nanoindentation tests-such as hardness, reduced Young's modulus, and elastic recovery. Further considerations on the nature and physical properties of the minerals forming these meteorites, including porosity, crystal orientation, or shock degree, are essential for refining predictions. Our findings underscore the potential of Machine Learning in enhancing mineral identification and mechanical property estimation in lunar exploration, which pave the way for new advancements and quick assessments in extraterrestrial mineral mining, processing, and research.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mesoporous Ni-Pt nanoparticles on Ni foam by electrodeposition, Dual porosity for efficient alkaline hydrogen evolution

  • Eiler, Konrad|||0000-0001-8648-6395
  • Alcaide, Francisco|||0000-0002-3373-3978
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In order to maximise electrochemically active surface area for water splitting, mesoporous Ni-Pt nanoparticles (NPs) are electrodeposited onto open-cell Ni foam to obtain a dual (macro- and meso-) porosity. Homogeneous deposition of the NPs is achieved by the use of a cylindrical Pt-coated mesh counter electrode, establishing a uniform electric field around the Ni foam substrate during electrodeposition. The Ni/Pt ratio is tunable with the electrodeposition parameters and all NPs are single-phase face-centred cubic solid solution and nanocrystalline, with a pore size of approx. 10 nm. Ni foam decorated with the Ni-rich particles, with mean particle sizes ranging from 50 to 80 nm, shows significantly higher activity at hydrogen evolution reaction (HER) in alkaline media with respect to the bare Ni foam. The highest HER efficiency was found fora relatively low Pt content of the NPs of about 26 at% (i. e., at 74 at% Ni) with an improvement of a factor 8 over bare Ni foam after durability assessment. These improvements are attributed to the higher surface area thanks to the NP structure, the dual porosity, and the alloying with Pt.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Analog control of La0.5Sr0.5FeO3-δ electrical properties through oxygen deficiency induced magnetic transition

  • Nizet, Paul
  • Chiabrera, Francesco Maria|||0000-0001-8940-2708
  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Alayo Bueno, Nerea|||0000-0002-0414-9246
  • Langner, Philipp|||0000-0003-1305-7826
  • Valencia, Sergio|||0000-0002-3912-5797
  • Fraile Rodríguez, Arantxa|||0000-0003-2722-0882
  • Baiutti, Federico|||0000-0001-9664-2486
  • Smekhova, Alevtina|||0000-0003-0946-2909
  • Morata, Alex|||0000-0002-3300-4636
  • Sort, Jordi|||0000-0003-1213-3639
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
Switchability of materials properties by applying controlled stimuli such as voltage pulses is an emerging field of study with applicability in adaptive and programmable devices like neuromorphic transistors or non-emissive smart displays. One of the most exciting approaches to modulate materials performance is mobile ion/vacancy insertion for inducing changes in relevant electrical, optical, or magnetic properties, among others. Unveiling the interplay between changes in the concentration of mobile defects (like oxygen vacancies) and functional properties in relevant materials represents a step forward for underpinning the emerging oxide iontronics discipline. In this work, electrochemical oxide-ion solid-state pumping cells were fabricated for analog control of the oxygen stoichiometry in thin films of mixed ionic-electronic conductor La0.5Sr0.5FeO3-δ. We demonstrate over more than four orders of magnitude electronic conductivity control at 50 °C within the same crystallographic phase through precise and continuous voltage control of the oxygen stoichiometry. We show that behind the modification of the transport properties of the material lays a paramagnetic-to-antiferromagnetic transition. We exploit such magnetoelectric coupling to show control over the exchange interaction between La0.5Sr0.5FeO3-δ and a ferromagnetic Co layer deposited on top.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Robust multiferroicity and magnetic modulation of the ferroelectric imprint field in heterostructures comprising epitaxial HfZrO and Co

  • Zakusylo, Tetiana|||0000-0001-5933-7108
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lenzi, Veniero|||0000-0002-3633-1966
  • Silva, José P. B.|||0000-0002-3485-7032
  • Marques, Luís
  • Yano, José Luís Ortolá
  • Lyu, Jike
  • Sort, Jordi|||0000-0003-1213-3639
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Fina, Ignasi|||0000-0003-4182-6194
Magnetoelectric multiferroics, either single-phase or composites comprising ferroelectric/ferromagnetic coupled films, are promising candidates for energy efficient memory computing. However, most of the multiferroic magnetoelectric systems studied so far are based on materials that are not compatible with industrial processes. Doped hafnia is emerging as one of the few CMOS-compatible ferroelectric materials. Thus, it is highly relevant to study the integration of ferroelectric hafnia into multiferroic systems. In particular, ferroelectricity in hafnia, and the eventual magnetoelectric coupling when ferromagnetic layers are grown atop of it, are very much dependent on quality of interfaces. Since magnetic metals frequently exhibit noticeable reactivity when grown onto oxides, it is expected that ferroelectricity and magnetoelectricity might be reduced in multiferroic hafnia-based structures. In this article, we present excellent ferroelectric endurance and retention in epitaxial HfZrO films grown on buffered silicon using Co as the top electrode. The crucial influence of a thin Pt capping layer grown on top of Co on the ferroelectric functional characteristics is revealed by contrasting the utilization of Pt-capped Co, non-capped Co and Pt. Magnetic control of the imprint electric field (up to 40% modulation) is achieved in Pt-capped Co/HfZrO structures, although this does not lead to appreciable tuning of the ferroelectric polarization, as a result of its high stability. Computation of piezoelectric and flexoelectric strain-mediated mechanisms of the observed magnetoelectric coupling reveal that flexoelectric contributions are likely to be at the origin of the large imprint electric field variation. Magnetoelectric composite multiferroic comprising ferroelectric doped HfO and ferromagnetic cobalt coupled films is demonstrated to be a promising candidate for energy efficient memory computing.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magneto-Ionic Engineering of Antiferromagnetically RKKY-Coupled Multilayers

  • Ma, Zheng|||0000-0003-3655-1448
  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Wrona, Jerzy
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Langer, Juergen|||0000-0002-6319-8259
  • Berthold, Ocker
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Voltage-driven ion motion offers a powerful means to modulate magnetism and spin phenomena in solids, a process known as magneto-ionics, which holds great promise for developing energy-efficient next-generation micro- and nano-electronic devices. Synthetic antiferromagnets (SAFs), consisting of two ferromagnetic layers coupled antiferromagnetically via a thin non-magnetic spacer, offer advantages such as enhanced thermal stability, robustness against external magnetic fields, and reduced magnetostatic interactions in magnetic tunnel junctions. Despite its technological potential, magneto-ionic control of antiferromagnetic coupling in multilayers (MLs) has only recently been explored and remains poorly understood, particularly in systems free of platinum-group metals. In this work, room-temperature voltage control of Ruderman-Kittel-Kasuya-Yosida (RKKY) interactions in Co/Ni-based SAFs is achieved. Transitions between ferrimagnetic (uncompensated) and antiferromagnetic (fully compensated) states is observed, as well as significant modulation of the RKKY bias field offset, emergence of additional switching events, and formation of skyrmion-like or pinned domain bubbles under relatively low gating voltages. These phenomena are attributed to voltage-driven oxygen migration in the MLs, as confirmed through microscopic and spectroscopic analyses. This study underscores the potential of voltage-triggered ion migration as a versatile tool for post-synthesis tuning of magnetic multilayers, with potential applications in magnetic-field sensing, energy-efficient memories and spintronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cytocompatibility and antimicrobial properties of silver nanoparticle-decorated hydroxyapatite-coated TiMoNbTa alloy

  • Escobar, Michael|||0000-0002-5813-3370
  • Turner, Adam Benedict|||0000-0002-4485-6738
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Pellicer, Eva|||0000-0002-8901-0998
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Trobos, Margarita|||0000-0002-9253-6771
Titanium and its alloys are widely used for implants, although they have limitations like higher elastic modulus compared to bone, causing stress shielding and potential implant failure. To address these issues, β-Ti alloys and calcium phosphate coatings are being developed to improve the mechanical properties while enhancing bone integration. The risk of infection is another important limitation that can be addressed through the deposition of antibacterial and antibiofilm coatings on the alloys. Here, we present a β-Ti alloy (Ti-18Mo-6Nb-5Ta (wt %)) coated with calcium-deficient hydroxyapatite (CDHA) and decorated with silver nanoparticles intended to be used as antimicrobial orthopedic implants. The experiments revealed that human osteoblasts were able to adhere and proliferate on coating. The presence of silver nanoparticles did not adversely affect human osteoblast differentiation and led to a 50 % increase in type I collagen production. The coating decorated with silver nanoparticles exhibited a significant antibacterial effect against Staphylococcus aureus, reducing biofilm formation by over 40 % after 24 h compared to the undecorated coating. Taken together, these results show the effectiveness of the silver decorated CDHA coating in enhancing osteoblasts proliferation and differentiation while also reducing biofilm growth when compared to CDHA coating.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Composition-Dependent Voltage-Driven OFF-ON Switching of Ferromagnetism in Co-Ni Oxide Microdisks

  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Eiler, Konrad|||0000-0001-8648-6395
  • Quintana, Alberto|||0000-0002-9813-735X
  • Rius, Gemma|||0000-0003-0552-1043
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Salicio-Paz, Asier|||0000-0002-0500-6634
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Lekka, Maria|||0000-0001-6811-3843
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Brunin, Guillaume|||0000-0002-5685-4668
  • Waroquiers, David|||0000-0001-8943-9762
  • Rignanese, Gian-Marco|||0000-0002-1422-1205
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics, which refers to the modification of the magnetic properties of materials through electric-field-induced ion migration, is emerging as one of the most promising methods to develop nonvolatile energy-efficient memory and spintronic and magnetoelectric devices. Herein, the controlled generation of ferromagnetism from paramagnetic Co-Ni oxide patterned microdisks (prepared upon thermal oxidation of metallic microdisks with dissimilar Co-Ni ratios, i.e., NiCo and NiCo) is demonstrated under the action of voltage. The effect is related to the partial reduction of the oxide phases to their metallic forms. Samples richer in Co show stronger magneto-ionic activity, which manifests in lower-onset threshold voltages, faster switching rates, and larger values of the attained saturation magnetization. By means of scanning electron microscopy, a cobalt segregation phenomenon has been experimentally observed upon thermal oxidation, which has been theoretically discussed from the diffusivities' viewpoint. X-ray diffraction characterization has revealed transitions between purely mixed Ni and Co oxides, in the OFF state, to a mixture of oxide and metallic phases, in the ON state, because of the oxygen ion motion outward/inward the Co-Ni oxide microdisks, depending on the voltage polarity. Ab initio calculations reveal that the energy barrier for oxygen vacancy migration is lower in CoO than in NiO, in agreement with the obtained magneto-ionic responses. The observation of magneto-ionic effects in patterned disks (and not only in archetypical continuous films) is a step further for the practical utilization of this phenomenon in real miniaturized devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magnetic field-enhanced hydrogen electrocatalysis, Unveiling the role of electrolyte concentration

  • Eiler, Konrad|||0000-0001-8648-6395
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
The hydrogen evolution reaction at Ni foam electrodes is enhanced by magnetic fields of up to 12 kOe applied perpendicular to the electric field. While in 1 M KOH, the beneficial change in overpotential at an applied field is on the order of 10 mV, the effect increases drastically when the concentration of OH is reduced to 0.1 M and 0.01 M, respectively, leading to a change in overpotential of up to 200 mV at the lowest concentration of OH, making the reaction significantly more energy-efficient. The addition of KCl as a supporting electrolyte effectively suppresses adverse effects originating from the low conductivity of 0.01 M KOH while preserving the advantageous effects of the magnetic field. Finally, the effects are studied in neutral 1 M KCl, likewise leading to an improvement in HER of up to 200 mV in overpotential, and in filtered seawater, where the overpotential improves by 28 mV when applying 12 kOe. The effects of magnetic fields on HER are shown to be reversible, and scale with the magnitude of the field. In addition to chronopotentiometry at -10 mA where magnetic field pulses generate a pulse in the HER overpotential, measurements are complemented by linear sweep voltammetry and electrochemical impedance spectroscopy.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Smart design of porous Ni and Ni-W films with tunable mechanical and magnetic performance

  • de Paz Castany, Roger|||0000-0003-4211-2636
  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Eiler, Konrad|||0000-0001-8648-6395
  • Stenning, Gavin B.G.
  • Hubin, Annick
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Dense and porous Ni and Ni-W alloy films were fabricated via electrodeposition, with the porous structures produced using colloidal crystal templates composed of 20 and 200 nm polystyrene spheres. The study investigates the effects of tungsten content (6-9 wt%) and porosity on the films' mechanical and magnetic properties, as well as their structural stability at elevated temperatures. From a crystallographic viewpoint, both Ni and Ni-W films exhibited a face-centered cubic (fcc) structure, with the diffraction peaks of the Ni-W films shifted toward lower angles due to the alloying of W with Ni. Interestingly, peak splitting was observed in the porous films, which originated from the confined metal growth between the polystyrene spheres. All films were nanocrystalline, with crystallite sizes in the range of 17 - 46 nm. Tungsten addition to nickel enhanced mechanical hardness but decreased magnetic moment and Curie temperature. Porosity, on the other hand, introduced new magnetic contributions not observed in dense films, including superparamagnetic behavior in the Ni-W films with 200 nm-size porosity. Thermal analysis revealed that the porous Ni-W films were morphologically stable up to 800 K, whereas porosity in pure Ni films degraded at 600 K. These findings highlight the potential of Ni-W coatings with tailored porosity for magnetic microelectromechanical systems and sustainable multi-functional coatings.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Decoupling Magnetic and Electric Field Control in Magneto-Ionic Materials for Energy-Efficient Brain-Inspired Memory Devices

  • Martínez Armesto, Luis|||0009-0003-0788-5067
  • Ma, Zheng|||0000-0003-3655-1448
  • Tan, Huan|||0000-0002-5579-2127
  • Pellicer, Eva|||0000-0002-8901-0998
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionic materials, which enable nonvolatile control of magnetism through voltage-driven ion migration, are emerging as promising candidates for neuromorphic computing. Unlike conventional memristors, these systems allow dual actuation by both electric and magnetic fields, providing a broader range of functional capabilities. The reliance on voltage rather than current significantly reduces Joule heating and enhances the energy efficiency. However, the general need for external magnetic fields to modulate the voltage-induced magnetic response remains a key limitation, undermining the full energy-saving potential of these systems. In this work, we present a magneto-ionic strategy in CoFeN that fully decouples the electric and magnetic field requirements. By taking advantage of a planar N 3- ion migration and the ferromagnetic exchange interactions between preexisting and newly generated CoFe magnetic regions, we achieve remanent-state magnetization control solely through applied voltage. The system exhibits behaviors reminiscent of neuromorphic-inspired functionalities, such as synaptic potentiation and depression, while also exhibiting a cumulative voltage-driven increase in magnetization in the absence of a magnetic field. Once the magnetic field is switched off, synaptic weight remains influenced by both the sample's magnetic and electric history. By eliminating the need for magnetic fields, our approach contributes to reduce energy consumption, offering a more efficient pathway for brain-inspired magneto-ionic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chiral-Induced Spin-Polarized Molecular Switching in a Magneto-Controlled 2D System using Electrical Readouts

  • Lei, Yiming|||0000-0002-3435-6924
  • Campos-Lendínez, Ángel|||0000-0002-7672-027X
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sort, Jordi|||0000-0003-1213-3639
  • Muñoz, Jose|||0000-0001-9529-6980
Molecular switches that exhibit bistable electron spins under ambient conditions have attracted growing interest due to their potential applications in quantum technologies, enabling exploitation of the chiral-induced spin selectivity (CISS) phenomenon on electron transfer processes. However, conferring chirality to 2D materials remains a major challenge in Materials Chemistry. Herein, we report the molecular engineering of a chiral spin-filtering 2D material ―viz. 2D germanane (2D─GeH)―functionalized by covalent anchoring of chiral cysteine molecules via nucleophilic substitution. By interfacing the resulting chiral 2D material with a ferromagnetic electrode, we demonstrate the dynamic control of spin polarization by manipulating the external magnetic field, leading to two well-defined and electrically distinguishable quantum states. Additionally, the spin polarization direction can be tailored on-demand via enantiomeric configuration of the chiral ligand, promoting spin-dependent electron transport. These findings establish a platform for fine-tuning the spin polarization in chiral 2D materials, offering new opportunities for writing, erasing, and reading unconventional spin-selective molecular switches, and thereby paving the way for advances in quantum information processing and spintronics applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Voltage-Driven Generation of Ferromagnetism in a Magneto-Ionically Active Antiferromagnet Enabling Room-Temperature Exchange Bias

  • Privitera, Simone|||0009-0000-0389-727X
  • Ma, Zheng|||0000-0003-3655-1448
  • Gómez-Torres, Hugo|||0000-0002-2857-7974
  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Tan, Huan|||0000-0002-5579-2127
  • Solsona, Pau|||0000-0001-9274-2447
  • Quintana, Alberto|||0000-0002-9813-735X
  • Dias, Thiago
  • Gouéré, Diane
  • Monteblanco, Elmer Nahuel|||0000-0002-3610-6822
  • Ravelosona, Dafiné
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Magneto-ionics-as the voltage-driven control of magnetic properties through ionic motion and redox processes-offers a promising route toward energy-efficient spintronic devices. Exchange bias, being the unidirectional anisotropy arising from interfacial coupling between antiferromagnets and ferromagnets, plays a central role in spintronics. Here, we demonstrate reversible, room-temperature magneto-ionic generation, suppression, and modulation of exchange bias within a 50 nm-thick antiferromagnetic, magneto-ionically active NiCoO layer. Instead of relying on field cooling to set exchange bias, an applied magnetic field during the growth promotes alignment of the antiferromagnetic spin sublattices, producing a preferential unidirectional orientation. Gating drives oxygen-ion migration along columnar grain boundaries, partially reducing NiCoO and forming ferromagnetic NiCo clusters that couple to the antiferromagnetic matrix. The exchange bias can be controlled by tuning the Ni/Co ratio, which adjusts the Néel temperature, and by varying the actuation time and voltage amplitude which control ferromagnetic cluster size. Micromagnetic simulations reveal that the exchange bias originates from the interfacial uncompensated spins exhibiting partial ferromagnetic-like behavior. This single-layer approach, together with the voltage-controlled formation and tuning of exchange bias without heat treatments, simplifies fabrication and offers a framework for low-power antiferromagnetic spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Compositionally tunable Néel temperature in Mn1-xCoxN, A route to enhance magneto-ionic exchange bias control

  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Jensen, Christopher J.|||0000-0001-7459-1841
  • Chen, Zhijie|||0000-0002-3594-5560
  • Zeng, Zihui|||0009-0009-6311-4666
  • Kinane, Christy J.|||0000-0002-1185-0719
  • Caruana, Andrew J.|||0000-0003-0715-5876
  • Grutter, Alexander J.
  • Borchers, Julie A.|||0000-0002-3348-8212
  • Menéndez, Enric|||0000-0003-3809-2863
  • Nogués, Josep|||0000-0003-4616-1371
  • Liu, Kai|||0000-0001-9413-6782
  • Sort, Jordi|||0000-0003-1213-3639
To address growing computational demands, energy-efficient hardware technologies such as spintronics and neuromorphic computing have attracted significant interest. In particular, magneto-ionics offers a low-power, non-volatile approach to control magnetic properties, making it particularly suitable for manipulating antiferromagnetic (AFM) materials. In this work, we report magneto-ionic control of exchange bias (EB) in Mn CoN/Co with a compositionally tunable Néel temperature, T. The high T in MnN (> 650 K) typically necessitates high-temperature annealing, which triggers uncontrolled thermally induced ion-motion effects. Addition of Co to MnN reduces T, enabling robust EB to be established after field cooling from 400 K, while preserving structural integrity. Importantly, EB can be subsequently tuned by voltage, up to a 30% enhancement observed at 100 K alongside an increase in saturation magnetization (up to ≈ 250 emu cm). Unlike previous works on similar single-layer nitrides, incorporating an additional ferromagnetic Co layer to form an AFM/ferromagnetic bilayer amplifies the voltage-induced effects. This work highlights the dual role of Co addition to MnN: (i) reducing the thermal requirements for setting EB by lowering T, and (ii) enhancing electrical control of EB. These results represent a step forward towards the development of low-power voltage-controlled spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Voltage control of magnetism in Ni-Co oxide mesoporous films, impact of porosity on oxygen magneto-ionics performance

  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Eiler, Konrad|||0000-0001-8648-6395
  • Quintana, Alberto|||0000-0002-9813-735X
  • Ma, Zheng|||0000-0003-3655-1448
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Control of magnetism through electric-field-driven migration of ions, referred to as magneto-ionics (MI), holds promise for the development of non-volatile energy-efficient memory storage, as well as spintronic, neuromorphic and magnetoelectric devices. Here, we study the MI phenomena in 350 nm thick NiCo oxide films with varying degrees of porosity, obtained by electrodeposition of the parent Ni-Co metallic alloy on metallized Si substrate and subsequent annealing in air. Annealing at 450 °C of the film electrodeposited from a P-123-containing electrolyte with Ni and Co sulfate salts yields a Ni-Co oxide that partially retains its mesoporosity. This sample exhibits a higher MI response compared to a low-porosity (nearly dense) Ni-Co oxide film, indicating that an increased surface-to-volume ratio enhances MI. Comprehensive characterization of the mesoporous Ni-Co oxide-coated Si/Ti/Au sample reveals that annealing not only oxidizes the top ≈100 nm of the Ni-Co film but also induces silicon diffusion. MI phenomena occur via O migration out of and into the top Ni-Co oxide layer under negative and positive biasing, respectively. While the system shows some irreversibility, endurance improves significantly as cycling frequency increases, evidencing the potential of this material for voltage-tunable memory applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Surface Modified β-Ti-18Mo-6Nb-5Ta (wt%) Alloy for Bone Implant Applications, Composite Characterization and Cytocompatibility Assessment

  • Escobar, Michael|||0000-0002-5813-3370
  • Careta, Oriol|||0000-0003-1333-0300
  • Fernández Navas, Nora
  • Bartkowska, Aleksandra|||0000-0002-6133-7155
  • Ludovico, Andrea Alberta|||0000-0002-6249-1146
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Gemming, Thomas|||0000-0002-7353-595X
  • Gebert, Annett|||0000-0003-2748-3850
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Nogués, Carme|||0000-0002-6361-8559
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Commercially available titanium alloys such as Ti-6Al-4V are established in clinical use as load-bearing bone implant materials. However, concerns about the toxic effects of vanadium and aluminum have prompted the development of Al- and V-free β-Ti alloys. Herein, a new alloy composed of non-toxic elements, namely Ti-18Mo-6Nb-5Ta (wt%), has been fabricated by arc melting. The resulting single β-phase alloy shows improved mechanical properties (Young's modulus and hardness) and similar corrosion behavior in simulated body fluid when compared with commercial Ti-6Al-4V. To increase the cell proliferation capability of the new biomaterial, the surface of Ti-18Mo-6Nb-5Ta was modified by electrodepositing calcium phosphate (CaP) ceramic layers. Coatings with a Ca/P ratio of 1.47 were obtained at pulse current densities, -j, of 1.8-8.2 mA/cm 2, followed by 48 h of NaOH post-treatment. The thickness of the coatings has been measured by scanning electron microscopy from an ion beam cut, resulting in an average thickness of about 5 μm. Finally, cytocompatibility and cell adhesion have been evaluated using the osteosarcoma cell line Saos-2, demonstrating good biocompatibility and enhanced cell proliferation on the CaP-modified Ti-18Mo-6Nb-5Ta material compared with the bare alloy, even outperforming their CaP-modified Ti-6-Al-4V counterparts.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Regulating oxygen ion transport at the nanoscale to enable highly cyclable magneto-ionic control of magnetism

  • Tan, Zhengwei|||0000-0003-4142-0637
  • Ma, Zheng|||0000-0003-3655-1448
  • Fuentes-Rodríguez, Laura|||0000-0002-8799-2369
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Attallah, Ahmed|||0000-0002-7759-0315
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Abad, Llibertat|||0000-0003-2637-8629
  • Casañ Pastor, Nieves|||0000-0003-2979-4572
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics refers to the control of magnetic properties of materials through voltage-driven ion motion. To generate effective electric fields, either solid or liquid electrolytes are utilized, which also serve as ion reservoirs. Thin solid electrolytes have difficulties to (i) withstand high electric fields without electric pinholes and (ii) maintain stable ion transport during long-term actuation. In turn, the use of liquid electrolytes can result in poor cyclability, thus limiting their applicability. Here we propose a nanoscale-engineered magneto-ionic architecture (comprising a thin solid electrolyte in contact with a liquid electrolyte), that drastically enhances cyclability while preserving sufficiently high electric fields to trigger ion motion. Specifically, we show that the insertion of a highly nanostructured (amorphous-like) Ta layer (with suitable thickness and electric resistivity) between a magneto-ionic target material (i.e., Co3O4) and the liquid electrolyte, increases magneto-ionic cyclability from < 30 cycles (when no Ta is inserted) to more than 800 cycles. Transmission electron microscopy together with variable energy positron annihilation spectroscopy reveal the crucial role of the generated TaOx interlayer as a solid-electrolyte (i.e., ionic conductor) that improves magneto-ionic endurance by proper tuning of the types of voltage-driven structural defects. The Ta layer is very effective in trapping oxygen and hindering O2- ions from moving into the liquid electrolyte, thus keeping O2- motion mainly restricted between Co3O4 and Ta when voltage of alternating polarity is applied. We demonstrate that this approach provides a suitable strategy to boost magneto-ionics by combining the benefits of solid and liquid electrolytes in a synergetic manner.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Silver-induced γ→ε martensitic transformation in FeMn alloys, an experimental and computational study

  • Bartkowska, Aleksandra|||0000-0002-6133-7155
  • Lekka, Christina|||0000-0001-9737-134X
  • Ludovico, Andrea Alberta|||0000-0002-6249-1146
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Porous FeMn alloys with additions of 0, 1, 3 and 5 wt.% of Ag were fabricated using powder metallurgy and sintering. The microstructure of the fabricated alloys was characterized using X-ray diffraction, transmission electron microscopy and selected area electron diffraction. While equiatomic FeMn and FeMn-1Ag alloys possess a fully austenitic structure, a change in the crystallographic structure is observed upon addition of 3 and 5 wt.% of Ag, where a mixture of γ austenite and ε martensite phases is observed. Compression tests reveal that such structural transition causes an increase of the yield stress. The evolution of microstructure with the Ag content can be understood from theoretical calculations which show that Ag atoms prefer the intrinsic stacking fault (ISF) sites, revealing lower energy for the ε-like atomic plane sequence. This causes local depletion of the electronic charge, therefore weakening the interatomic bonds at the ISF plane and facilitating the phase transition. In addition, the total energy difference between the γ and ε phases decreases upon Ag addition. This enables the coexistence of both phases in the sample with 5 wt.% Ag. Both experimental and theoretical data agree that the magnetization value gradually increases upon Ag addition. This is due to the local stress that is introduced by Ag atoms, which expand the Ag-Fe and Ag-Mn first neighbour interatomic bonds compared to FeMn. This stress results in electronic charge that locally alters the Fe and Mn atomic magnetic moments. These results are appealing for the design of FeMn-based alloys with tuneable phase composition and physical properties for several technological applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Multilevel Magnetic Synapse Based on Voltage-Tuneable Magnetism by Nitrogen Ion Migration

  • Peda, Monalisha|||0000-0002-3299-1254
  • Ma, Zheng|||0000-0003-3655-1448
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Advanced synaptic devices with simultaneous memory and processor capabilities are envisaged as core elements of neuromorphic computing (NC) for low-power artificial intelligence. So far, most synaptic devices are based on resistive memories, where the device resistance is tuned with applied voltage or current. However, the use of electric current in such resistive devices causes significant power dissipation due to Joule heating. Higher energy efficiency has been reported in materials exhibiting voltage control of magnetism (VCM). In particular, voltage-driven ion motion to modulate magnetism (magneto-ionics) is an emerging VCM mechanism that can offer new prospects for low-power implementation of NC. In the present work, voltage-driven nitrogen ion motion is exploited in transition metal nitride (CoFeN) thin films (i.e., nitrogen magneto-ionics) to emulate biological synapses. In the proposed device, distinct multilevel non-volatile magnetic states for analog computing and multi-state storage are realized. Moreover, essential synaptic functionalities of the human brain are successfully simulated. The device exhibits an excellent synapse with a remarkable retention time (≈6 months), high switching ratio and large endurance (≈103), for hardware implementation of NC. This research provides new insight into exploiting magneto-ionic-based synaptic devices for spin-based neuromorphic systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Elucidating Individual Magnetic Contributions in Bi-Magnetic Fe3O4/Mn3O4 Core/Shell Nanoparticles by Polarized Powder Neutron Diffraction

  • Golosovsky, Igor V.|||0000-0002-2667-4711
  • Kibalin, I.A.|||0000-0003-2398-2652
  • Gukasov, Arsen|||0000-0003-2763-468X
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Hansen, T.C.
  • Puente Orench, Inés|||0000-0001-5491-1238
  • Lelièvre-Berna, E.
  • Nogués, Josep|||0000-0003-4616-1371
Heterogeneous bi-magnetic nanostructured systems have had a sustained interest during the last decades owing to their unique magnetic properties and the wide range of derived potential applications. However, elucidating the details of their magnetic properties can be rather complex. Here, a comprehensive study of FeO/MnO core/shell nanoparticles using polarized neutron powder diffraction, which allows disentangling the magnetic contributions of each of the components, is presented. The results show that while at low fields the FeO and MnO magnetic moments averaged over the unit cell are antiferromagnetically coupled, at high fields, they orient parallel to each other. This magnetic reorientation of the MnO shell moments is associated with a gradual evolution with the applied field of the local magnetic susceptibility from anisotropic to isotropic. Additionally, the magnetic coherence length of the FeO cores shows some unusual field dependence due to the competition between the antiferromagnetic interface interaction and the Zeeman energies. The results demonstrate the great potential of the quantitative analysis of polarized neutron powder diffraction for the study of complex multiphase magnetic materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Accelerated biodegradation of FeMn porous alloy coated with ZnO, Effect on cytocompatibility and antibiofilm properties

  • Bartkowska, Aleksandra|||0000-0002-6133-7155
  • Turner, Adam Benedict|||0000-0002-4485-6738
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Trobos, Margarita|||0000-0002-9253-6771
  • Nogués, Carme|||0000-0002-6361-8559
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Fe-based alloys are being studied as potential candidates for biodegradable implants; however, their degradation rates remain too slow. To accelerate biodegradation while simultaneously hindering biofilm formation, a ZnO coating was deposited onto porous equiatomic FeMn alloy discs by sol-gel method using dip coating. The effect of the ZnO coating on the microstructure, biodegradability, cytocompatibility, and antibacterial properties were investigated. Biodegradability experiments were performed by immersing the specimens in Hank's balanced salt solution and measuring ion release after up to 28 days of immersion. The experiments showed an increased degradation of the FeMn/ZnO sample due to Fe segregation towards the grain boundaries, formation of iron-manganese oxide, and limited formation of degradation products on ZnO. Further, indirect Saos-2 cell cytotoxicity testing in 24 h sample-conditioned media showed no significant cytotoxicity in concentrations equal to or below 50 %. In addition, the total biofilm biovolume formed by Staphylococcus aureus on the FeMn/ZnO surface was significantly reduced compared to the uncoated FeMn. Taken together, these results show that the ZnO coating on FeMn improves the degradation rate, maintains cytocompatibility, and reduces biofilm accumulation when compared to an uncoated FeMn alloy.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Wireless magneto-ionics, voltage control of magnetism by bipolar electrochemistry

  • Ma, Zheng|||0000-0003-3655-1448
  • Fuentes-Rodríguez, Laura|||0000-0002-8799-2369
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Pellicer, Eva|||0000-0002-8901-0998
  • Abad, Llibertat|||0000-0003-2637-8629
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Menéndez, Enric|||0000-0003-3809-2863
  • Casañ Pastor, Nieves|||0000-0003-2979-4572
  • Sort, Jordi|||0000-0003-1213-3639
Modulation of magnetic properties through voltage-driven ion motion and redox processes, i.e., magneto-ionics, is a unique approach to control magnetism with electric field for low-power memory and spintronic applications. So far, magneto-ionics has been achieved through direct electrical connections to the actuated material. Here we evidence that an alternative way to reach such control exists in a wireless manner. Induced polarization in the conducting material immersed in the electrolyte, without direct wire contact, promotes wireless bipolar electrochemistry, an alternative pathway to achieve voltage-driven control of magnetism based on the same electrochemical processes involved in direct-contact magneto-ionics. A significant tunability of magnetization is accomplished for cobalt nitride thin films, including transitions between paramagnetic and ferromagnetic states. Such effects can be either volatile or non-volatile depending on the electrochemical cell configuration. These results represent a fundamental breakthrough that may inspire future device designs for applications in bioelectronics, catalysis, neuromorphic computing, or wireless communications. Conventional voltage control of magnetism relies on making direct electrical contacts to target samples. Here, wireless converse magnetoelectric actuation through bipolar electrochemistry is reported in magnetoionic transition metal nitride films.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Iron oxide nanoparticles (Fe3O4, γ-Fe2O3 and FeO) as photothermal heat mediators in the first, second and third biological windows

  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Lafuente, Aritz|||0000-0002-1497-5744
  • Özel, Fatmahan
  • Fantechi, Elvira|||0000-0002-9323-2198
  • Muro Cruces, Javier
  • Hémadi, M.
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Nogués, Josep|||0000-0003-4616-1371
Nanotherapies are gaining increased interest for the treatment diverse diseases, particularly cancer, since they target the affected area directly, presenting higher efficacy and reduced side effects than traditional therapies. A promising nanotherapy approach is hyperthermia, where the nanoparticle can induce a local temperature increase by an external stimulus in the sick tissue to selectively kill the malignant cells. Among the diverse hyperthermia methods, photothermia is based on the absorption of light by the nanoparticles and further conversion into heat. Within the very wide range of nanostructured photothermal agents, iron oxides offer remarkable features since they are already approved by the FDA/EMA for various biomedical applications, they are biodegradable, easily manipulated using magnetic fields and can be imaged by diverse techniques. Here, we summarize the advantages of using the second biological window, both from the perspective of the skin and the optical properties of iron oxides. Further, we review the photothermal performance of iron oxide nanoparticles in the first, second and third biological windows. Overall, the results show that, for different types of iron oxide nanoparticles (FeO, γ-FeO, wüstite-FeO), both the heating capacity (i.e., induced temperature increase) and the photothermal conversion efficiency, η, vary in a complex way with the light wavelength, depending critically on the measurement conditions and physiochemical properties of the materials. Despite the spread in the reported photothermal properties of iron oxides, FeO particles tend to perform better than their γ-FeO counterparts, particularly in the second biological window. Interestingly, FeO, which has not been exploited so far from a photothermal perspective, shows very appealing absorption properties. Our preliminary studies using FeO/FeO core/shell nanoparticles evidence that they have excellent photothermal properties, outperforming FeO in both first and second biological windows. Finally, some applications beyond cancer treatment of iron oxide nanoparticles, exploiting the enhanced properties in the second spectral window, are discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

One and two-step electrodeposition of composite films of calcium-deficient hydroxyapatite matrix with nanoscale Ag- and Zn-based particles

  • Escobar, Michael|||0000-0002-5813-3370
  • Hoffmann, Volker|||0000-0001-8084-6476
  • Gemming, Thomas|||0000-0002-7353-595X
  • Kim, Minsoo|||0000-0002-3478-1277
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
A fundamental study regarding the electrochemical synthesis of composite coatings with application in the orthopaedic field has been conducted. In particular, the electrodeposition of calcium phosphate coatings with Ag nanoparticles (AgNPs) from either a single electrolyte (one-step, 1S) or two electrolytes (two-step, 2S) on a β-Ti alloy (Ti-18Mo-6Nb-4Ta in wt%) was investigated. Pulse current deposition was implemented to produce the composite coatings by the 1S approach from a simple solution containing 42 mM Ca(NO3)2·4H2O, 25 mM NH4H2PO4, and 0.5 mM AgNO3 at 65°C. Meanwhile, the calcium phosphate matrix was also deposited by pulse current, and Ag was afterwards grown by direct current from 0.1 M KNO3 + x mM AgNO3 (x = 5, 10) at 25 °C (2S approach). The Ca/P ratio of the matrix was compatible with the formation of calcium-deficient hydroxyapatite (CDHA). The resulting Ag content in the composites could be varied between 4 and 13 wt% as a function of the working conditions. The 2S-derived coatings produced by electroplating Ag at j = -20.8 mA/cm2 from 0.1 M KNO3 + 10 mM AgNO3 furnished an optimal dispersion of the AgNPs on top of the CDHA matrix, while aggregation and/or dendritic growth was observed in other cases. Glow discharge optical emission spectrometry (GDOES) measurements indicated that a given amount of AgNPs becomes engulfed in the CDHA matrix during the 1S electrodeposition, whereas most of them decorate its outer surface in the 2S-derived coatings. The applicability of the two approaches was extended to the case of zinc oxide. ZnO-containing CDHA coatings in which the Zn element was homogeneously distributed across the film surface were obtained from 42 mM Ca(NO3)2·4H2O, 25 mM NH4H2PO4 and 1 mM Zn(NO3)2·6H2O at 65 °C (1S approach). On the contrary, ZnO-NPs could be clearly observed when deposition from 5 mM KNO3 + 5 mM Zn(NO3)2 was performed at 70 °C on top of previously grown CDHA (2S approach). The results indicated that the percentage and location of the antibacterial element (Ag, Zn) in the calcium phosphate matrix can be tuned on demand to a great extent by electrochemical means.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced Proliferation and Differentiation of Human Osteoblasts by Remotely Controlled Magnetic-Field-Induced Electric Stimulation Using Flexible Substrates

  • Careta, Oriol|||0000-0003-1333-0300
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Perdikos, Filippos|||0000-0002-3268-6356
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Pellicer, Eva|||0000-0002-8901-0998
  • Stefani, Christina|||0000-0002-8818-075X
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
With the progressive aging of the population, bone fractures are an increasing major health concern. Diverse strategies are being studied to reduce the recovery times using nonaggressive treatments. Electrical stimulation (either endogenous or externally applied electric pulses) has been found to be effective in accelerating bone cell proliferation and differentiation. However, the direct insertion of electrodes into tissues can cause undesirable inflammation or infection reactions. As an alternative, magnetoelectric heterostructures (wherein magnetic fields are applied to induce electric polarization) could be used to achieve electric stimulation without the need for implanted electrodes. Here, we develop a magnetoelectric platform based on flexible kapton/FeGa/P(VDF-TrFE) (flexible substrate/magnetostrictive layer/ferroelectric layer) heterostructures for remote magnetic-field-induced electric field stimulation of human osteoblast cells. We show that the use of flexible supports overcomes the clamping effects that typically occur when analogous magnetoelectric structures are grown onto rigid substrates (which preclude strain transfer from the magnetostrictive to the ferroelectric layers). The study of the diverse proliferation and differentiation markers evidence that in all the stages of bone formation (cell proliferation, extracellular matrix maturation, and mineralization), the electrical stimulation of the cells results in a remarkably better performance. The results pave the way for novel strategies for remote cell stimulation based on flexible platforms not only in bone regeneration but also in many other applications where electrical cell stimulation may be beneficial (e.g., neurological diseases or skin regeneration).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Optimizing magneto-ionic performance in structure/composition-engineered ternary nitrides

  • Ma, Zheng|||0000-0003-3655-1448
  • Peda, Monalisha|||0000-0002-3299-1254
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Pellicer, Eva|||0000-0002-8901-0998
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Attallah, Ahmed|||0000-0002-7759-0315
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Ibrahim, Fatima
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics, an emerging approach to manipulate magnetism that relies on voltage-driven ion motion, holds the promise to boost energy efficiency in information technologies such as spintronic devices or future non-von Neumann computing architectures. For this purpose, stability, reversibility, endurance, and ion motion rates need to be synergistically optimized. Among various ions, nitrogen has demonstrated superior magneto-ionic performance compared to classical species such as oxygen or lithium. Here, we show that ternary Co1-xFexN compound exhibits an unprecedented nitrogen magneto-ionic response. Partial substitution of Co by Fe in binary CoN is shown to be favorable in terms of generated magnetization, cyclability and ion motion rates. Specifically, the Co0.35Fe0.65N films exhibit an induced saturation magnetization of 1,500 emu/cm3, a magneto-ionic rate of 35.5 emu/(cm3·s) and endurance exceeding 103 cycles. These values significantly surpass those of other existing nitride and oxide systems. This improvement can be attributed to the larger saturation magnetization of Co0.35Fe0.65 compared to individual Co and Fe, the nature and size of structural defects in as-grown films of different composition, and the dissimilar formation energies of Fe and Co with N in the various developed crystallographic structures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly cyclable voltage control of magnetism in cobalt ferrite nanopillars for memory and neuromorphic applications

  • de h-Óra, Muireann|||0000-0002-2070-0755
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Peda, Monalisha|||0000-0002-3299-1254
  • Maity, Tuhin
  • Zhu, Bonan
  • Lee, Shinbuhm
  • Sun, Zhuotong
  • Sort, Jordi|||0000-0003-1213-3639
  • Driscoll, Judith|||0000-0003-4987-6620
Tuning the properties of magnetic materials by voltage-driven ion migration (magneto-ionics) gives potential for energy-efficient, non-volatile magnetic memory and neuromorphic computing. Here, we report large changes in the magnetic moment at saturation (mS) and coercivity (HC), of 34% and 78%, respectively, in an array of CoFe2O4 (CFO) epitaxial nanopillar electrodes (∼50 nm diameter, ∼70 nm pitch, and 90 nm in height) with an applied voltage of -10 V in a liquid electrolyte cell. Furthermore, a magneto-ionic response faster than 3 s and endurance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mechanical properties of minerals in lunar and HED meteorites from nanoindentation testing, implications for space mining

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Sort, Jordi|||0000-0003-1213-3639
  • Ibañez-Insa, Jordi|||0000-0002-8909-6541
  • Rimola, Albert|||0000-0002-9637-4554
This study analyzes the mechanical and elemental properties of lunar meteorites DHOFAR 1084, JAH 838, NWA 11444, and HED meteorite NWA 6013. Utilizing microscale rock mechanics experiments, that is, nanoindentation testing, this research reveals significant heterogeneity in both mechanical and elemental attributes across the mineral samples. Olivines, pyroxene, feldspar, and spinel demonstrate similar compositional and mechanical characteristics. Conversely, other silicate and oxide minerals display variations in their mechanical properties. Terrestrial olivines subjected to nanoindentation tests exhibit increased hardness and a higher Young's modulus than their lunar counterparts. A linear correlation is observed between the H/E ratio and both plastic and elastic energies. Additionally, the alignment of mineral phases along a constant H/E ratio suggests variations in local porosity. This study also highlights the need for further research focusing on porosity, phase insertions within the matrix, and structural orientations to refine our understanding of these mechanical characteristics. The findings have direct implications for in situ resource utilization strategies and future state-of-the-art impact models. This comprehensive characterization serves as a foundational resource for future research efforts in space science and mining.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Room-Temperature Solid-State Nitrogen-Based Magneto-Ionics in CoxMn1-xN Films

  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Jensen, Christopher J.|||0000-0001-7459-1841
  • Chen, Zhijie|||0000-0002-3594-5560
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Ma, Zheng|||0000-0003-3655-1448
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Wagner, Andreas|||0000-0001-7575-3961
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Menéndez, Enric|||0000-0003-3809-2863
  • Nogués, Josep|||0000-0003-4616-1371
  • Liu, Kai|||0000-0001-9413-6782
  • Sort, Jordi|||0000-0003-1213-3639
The increasing energy demand in information technologies requires novel low-power procedures to store and process data. Magnetic materials, central to these technologies, are usually controlled through magnetic fields or spin-polarized currents that are prone to the Joule heating effect. Magneto-ionics is a unique energy-efficient strategy to control magnetism that can induce large non-volatile modulation of magnetization, coercivity and other properties through voltage-driven ionic motion. Recent studies have shown promising magneto-ionic effects using nitrogen ions. However, either liquid electrolytes or prior annealing procedures are necessary to induce the desired N-ion motion. In this work, magneto-ionic effects are voltage-triggered at room temperature in solid state systems of CoMn N films, without the need of thermal annealing. Upon gating, a rearrangement of nitrogen ions in the layers is observed, leading to changes in the co-existing ferromagnetic and antiferromagnetic phases, which result in substantial increase of magnetization at room temperature and modulation of the exchange bias effect at low temperatures. A detailed correlation between the structural and magnetic evolution of the system upon voltage actuation is provided. The obtained results offer promising new avenues for the utilization of nitride compounds in energy-efficient spintronic and other memory devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fe/Au galvanic nanocells to generate self-sustained Fenton reactions without additives at neutral pH

  • Shahnazarova, Gubakhanim
  • Al Hoda Al Bast, Nour
  • Ramirez, Jessica Casandra
  • Nogués, Josep|||0000-0003-4616-1371
  • Esteve, Jaume|||0000-0001-9440-7984
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Serrà, Albert|||0000-0003-0147-3400
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Sepúlveda, Borja|||0000-0002-1562-7602
The generation of reactive oxygen species (ROS) via the Fenton reaction has received significant attention for widespread applications. This reaction can be triggered by zero-valent metal nanoparticles by converting externally added HO into hydroxyl radicals (˙OH) in acidic media. To avoid the addition of external additives or energy supply, developing self-sustained catalytic systems enabling onsite production of HO at a neutral pH is crucial. Here, we present novel galvanic nanocells (GNCs) based on metallic Fe/Au bilayers on arrays of nanoporous silica nanostructures for the generation of self-sustained Fenton reactions. These GNCs exploit the large electrochemical potential difference between the Fe and Au layers to enable direct HO production and efficient release of Fe in water at neutral pH, thereby triggering the Fenton reaction. Additionally, the GNCs promote Fe/Fe circulation and minimize side reactions that passivate the iron surface to enhance their reactivity. The capability to directly trigger the Fenton reaction in water at pH 7 is demonstrated by the fast degradation and mineralization of organic pollutants, by using tiny amounts of catalyst. The self-generated HO and its transformation into ˙OH in a neutral environment provide a promising route not only in environmental remediation but also to produce therapeutic ROS and address the limitations of Fenton catalytic nanostructures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Elucidating the Lithiation Process in Fe3-δO4 Nanoparticles by Correlating Magnetic and Structural Properties

  • Ulusoy, Seda
  • Feygenson, Mikhail
  • Thersleff, Thomas
  • Uusimaeki, Toni
  • Valvo, Mario|||0000-0002-0069-8707
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Nogués, Josep|||0000-0003-4616-1371
  • Svedlindh, Peter|||0000-0002-3049-6831
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
Due to their high potential energy storage, magnetite (FeO) nanoparticles have become appealing as anode materials in lithium-ion batteries. However, the details of the lithiation process are still not completely understood. Here, we investigate chemical lithiation in 70 nm cubic-shaped magnetite nanoparticles with varying degrees of lithiation, x = 0, 0.5, 1, and 1.5. The induced changes in the structural and magnetic properties were investigated using X-ray techniques along with electron microscopy and magnetic measurements. The results indicate that a structural transformation from spinel to rock salt phase occurs above a critical limit for the lithium concentration (x), which is determined to be between 0.5< x ≤ 1 for FeO. Diffraction and magnetization measurements clearly show the formation of the antiferromagnetic LiFeO phase. Upon lithiation, magnetization measurements reveal an exchange bias in the hysteresis loops with an asymmetry, which can be attributed to the formation of mosaic-like LiFeO subdomains. The combined characterization techniques enabled us to unambiguously identify the phases and their distributions involved in the lithiation process. Correlating magnetic and structural properties opens the path to increasing the understanding of the processes involved in a variety of nonmagnetic applications of magnetic materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ionic control of magnetism in all-solid-state CoOx/yttria-stabilized zirconia heterostructures

  • Ma, Zheng|||0000-0003-3655-1448
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Quintana, Alberto|||0000-0002-9813-735X
  • Spasojevic, Irena|||0000-0002-6426-7009
  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionic gating, a procedure that enables the modulation of materials' magnetic properties by voltage-driven ion motion, offers alternative perspectives for emerging low-power magnetic storage and spintronic applications. Most previous studies in all-solid-state magneto-ionic systems have focused on the control of interfacial magnetism of ultrathin (i.e., 1-3 nm) magnetic films, taking advantage of an adjacent ionic conducting oxide, usually GdO or HfO, that transports functional ionic species (e.g., H or O). Here, we report on room-temperature OFF-ON ferromagnetism by solid-state magneto-ionics in relatively thick (25 nm) patterned CoO films grown on an yttria-stabilized zirconia (YSZ) layer, which acts as a dielectric to hold electric field and as an O ion reservoir. Upon negatively biasing, O ions from the CoO tend to migrate toward the YSZ gate electrode, leading to the gradual generation of magnetization (i.e., OFF-to-ON switching of a ferromagnetic state). X-ray absorption and magnetic circular dichroism studies reveal subtle changes in the electronic/chemical characteristics, responsible for the induced magnetoelectric effects in such all-oxide heterostructures. Recovery of the initial (virtually non-magnetic) state is achieved by application of a positive voltage. The study may guide future development of all-solid-state low-power CMOS-compatible magneto-ionic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Controlling Magneto-Ionics by Defect Engineering Through Light Ion Implantation

  • Ma, Zheng|||0000-0003-3655-1448
  • Martins, Sofia|||0000-0002-1801-1651
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Chen, Song
  • Monteblanco, Elmer Nahuel|||0000-0002-3610-6822
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Attallah, Ahmed|||0000-0002-7759-0315
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Quintana, Alberto|||0000-0002-9813-735X
  • Pellicer, Eva|||0000-0002-8901-0998
  • Ravelosona, Dafiné
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Magneto-ionics relies on the voltage-driven transport of ions to modify magnetic properties. As a diffusion-controlled mechanism, defects play a central role in determining ion motion and, hence, magneto-ionic response. Here, the potential of ion implantation is exploited to engineer depth-resolved defect type and density with the aim to control the magneto-ionic behavior of CoO thin films. It is demonstrated that through a single implantation process of light ions (He) at 5 keV, the magneto-ionic response of a nanostructured 50 nm thick CoO film, in terms of rate and amount of induced magnetization, at short-, mid-, and long-term voltage actuation, can be controlled by varying the generated collisional damage through the ion fluence. These results constitute a proof-of-principle that paves the way to further use ion implantation (tuning the ion nature, energy, fluence, target temperature, or using multiple implantations) to enhance performance in magneto-ionic systems, with implications in ionic-based devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The efficient magneto-mechanical actuation of cancer cells using a very low concentration of non-interacting ferrimagnetic hexaferrite nanoplatelets

  • Goršak, Tanja
  • Jovičić, Eva Jarc
  • Tratnjek, Larisa
  • Križaj, Igor
  • Sepulveda, Borja
  • Nogués, Josep|||0000-0003-4616-1371
  • Kreft, Mateja E.
  • Petan, Toni|||0000-0003-1223-2397
  • Kralj, Slavko
  • Makovec, Darko|||0000-0002-0190-6758
Magneto-mechanical actuation (MMA) using the low-frequency alternating magnetic fields (AMFs) of magnetic nanoparticles internalized into cancer cells can be used to irreparably damage these cells. However, nanoparticles in cells usually agglomerate, thus greatly augmenting the delivered force compared to single nanoparticles. Here, we demonstrate that MMA also decreases the cell viability, with the MMA mediated by individual, non-interacting nanoparticles. The effect was demonstrated with ferrimagnetic (i.e., permanently magnetic) barium-hexaferrite nanoplatelets (NPLs, ∼50 nm wide and 3 nm thick) with a unique, perpendicular orientation of the magnetization. Two cancer-cell lines (MDA-MB-231 and HeLa) are exposed to the NPLs in-vitro under different cell-culture conditions and actuated with a uniaxial AMF. TEM analyses show that only a small number of NPLs internalize in the cells, always situated in membrane-enclosed compartments of the endosomal-lysosomal system. Most compartments contain 1-2 NPLs and only seldom are the NPLs found in small groups, but never in close contact or mutually oriented. Even at low concentrations, the single NPLs reduce the cell viability when actuated with AMFs, which is further increased when the cells are in starvation conditions. These results pave the way for more efficient in-vivo MMA at very low particle concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Porous and Meltable Metal-Organic Polyhedra for the Generation and Shaping of Porous Mixed-Matrix Composites

  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Meng, Lingxin
  • Garcia-Masferrer, Joan
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Sort, Jordi|||0000-0003-1213-3639
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal-organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO uptake relative to the parent film.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Wireless pulsed nanophotoelectrochemical cell for the ultrafast degradation of organic pollutants

  • Serrà, Albert|||0000-0003-0147-3400
  • Gomez, Elvira|||0000-0002-9223-6357
  • Al Hoda Al Bast, Nour
  • Zhang, Yue
  • Duque, Marcos
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Esteve, Jaume|||0000-0001-9440-7984
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
An urgent demand exists for advanced-technologies to efficiently remove persistent organic pollutants from water, while minimizing energy consumption. Here, we introduce an innovative wireless nanophotoelectrochemical (nPEC) cell using pulsed light for the ultrafast degradation/mineralization of organic pollutants. The nPEC cell comprises a nanostructured Si-pn photodiode that monolithically integrates: (i) a Si-n/Au nanowire-based-photocathode for effective light absorption and photovoltage generation, and (ii) a Si-p/mesoporous-NiPt photoanode serving as catalyst to wirelessly amplify the sulfate radical production by low-intensity light without any bias voltage. The efficacy of the nPEC cell was shown by ultrafast degradation (>99 %) and mineralization (>98 %) of three emerging pollutants (tetracycline, levofloxacin and anatoxin-A). Notably, reaction kinetics were boosted by more than one order of magnitude when exposed to light intensities ca. 5-fold lower than sunlight. Remarkably, pulsed light beams in the 100-500 Hz range provided an additional enhancement in the degradation/mineralization efficiencies, reducing energy-input by half, while enhancing the catalyst's oxidation state and durability.