Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Voltage-Driven Generation of Ferromagnetism in a Magneto-Ionically Active Antiferromagnet Enabling Room-Temperature Exchange Bias

  • Privitera, Simone|||0009-0000-0389-727X
  • Ma, Zheng|||0000-0003-3655-1448
  • Gómez-Torres, Hugo|||0000-0002-2857-7974
  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Tan, Huan|||0000-0002-5579-2127
  • Solsona, Pau|||0000-0001-9274-2447
  • Quintana, Alberto|||0000-0002-9813-735X
  • Dias, Thiago
  • Gouéré, Diane
  • Monteblanco, Elmer Nahuel|||0000-0002-3610-6822
  • Ravelosona, Dafiné
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Magneto-ionics-as the voltage-driven control of magnetic properties through ionic motion and redox processes-offers a promising route toward energy-efficient spintronic devices. Exchange bias, being the unidirectional anisotropy arising from interfacial coupling between antiferromagnets and ferromagnets, plays a central role in spintronics. Here, we demonstrate reversible, room-temperature magneto-ionic generation, suppression, and modulation of exchange bias within a 50 nm-thick antiferromagnetic, magneto-ionically active NiCoO layer. Instead of relying on field cooling to set exchange bias, an applied magnetic field during the growth promotes alignment of the antiferromagnetic spin sublattices, producing a preferential unidirectional orientation. Gating drives oxygen-ion migration along columnar grain boundaries, partially reducing NiCoO and forming ferromagnetic NiCo clusters that couple to the antiferromagnetic matrix. The exchange bias can be controlled by tuning the Ni/Co ratio, which adjusts the Néel temperature, and by varying the actuation time and voltage amplitude which control ferromagnetic cluster size. Micromagnetic simulations reveal that the exchange bias originates from the interfacial uncompensated spins exhibiting partial ferromagnetic-like behavior. This single-layer approach, together with the voltage-controlled formation and tuning of exchange bias without heat treatments, simplifies fabrication and offers a framework for low-power antiferromagnetic spintronic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing
  • Usoltsev, Oleg
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto, Iván
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi
  • Lu, Xuan
  • Gupta, Kapil
  • Botifoll, Marc
  • Simonelli, Laura
  • Fauth, François
  • Zhou, Jin Yuan
  • Llorca, Jordi
  • Lu, Yan
  • Zhang, Chao Yue
  • Arbiol, Jordi
  • Cabot, Andreu
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly Li2S nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid Li2S nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications., IREC and HZB acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALINGBAT ─ HORIZON-CL5-2022-D2-01). J.Y. and C.H. thank the China Scholarship Council for the financial support. C.Y.Z. and J.Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. I.M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101081337. XAS experiments were performed at the beamline-22-CLÆSS (Proposal Number: 2024068488),[50] and operando XRD was performed in beamline BL04-MSPD (Grant Number: 2023097750) at ALBA Synchrotron, Spain. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to projects MICIN/FEDER PID2024-156765OB-C21 and CEX2023-001300-M (MCIN/AEI 10.13039/501100011033). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.[51], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Electrochemical Nucleation and Growth in Battery Electrodes under Reactant-Limited Conditions

  • Yu, Jing
  • Martynova, Irina
  • Li, Zeyan
  • Li, Canhuang
  • Zhang, Chaoqi
  • Sun, Qing
  • Arbiol, Jordi
  • Cabot, Andreu
Nucleation and growth of solid phases from species dissolved in an electrolyte govern battery performance, defining capacity, efficiency, rate capability, stability, and safety. However, classical nucleation-growth models often do not realistically describe working cells, failing to capture highly asymmetric out-of-plane growth and finite reactant supply. Here, we introduce a nucleation-growth model to fit potentiostatic nucleation transients that explicitly accounts for a finite amount of reactant and its depletion, reproducing the characteristic current rise upon nucleation, peak, and subsequent decay without ad hoc corrections. Both instantaneous nucleation and progressive nucleation are considered. The model is applied to the nucleation and growth of Li2S at a catalyzed electrode from a lithium polysulfide solution, yielding nucleus densities of up to 6.7 × 109 cm-2 and an effective reaction rate constant of 1.8 × 10-3 s-1. Beyond Li-S batteries, the framework can be extended to other conversion and metal-deposition chemistries in which finite-supply effects dominate., IREC acknowledges funding from CERCA Programme/Generalitat de Catalunya, Generalitat de Catalunya 2021SGR01581, SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), and European Union NextGenerationEU/PRTR. This work was partially funded by the European Union (Grant Agreement 101104006 - HEALING BAT - HORIZON-CL5-2022-D2-01). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. I. M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101081337. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors acknowledge support from the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors are thankful for the support from project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science Ph.D. program. J.Y. has received funding from the CSC-UAB Ph.D. scholarship program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. (17), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magneto-ionic control of magnetism through voltage-driven carbon transport

  • Tan, Zhengwei
  • Ma, Zheng
  • Privitera, S.
  • Liedke, Maciej O.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Costa Krämer, José Luis
  • Quintana, Alberto
  • García-Tort, A.
  • Herrero Martín, Javier
  • Mei, Yongfeng
  • Chen, Xiang-Zhong
  • Tan, Huan
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Arredondo-López, A.
  • Ibrahim, Fatima
  • Chshiev, Mairbek
  • Longo, E.
  • Rovirola, M.
  • Macià, F.
  • Lopeandía, Aitor
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
  • Menéndez, Enric
Control of magnetism through voltage-driven ionic processes (i.e., magneto-ionics) holds potential for next-generation memories and computing. This stems from its non-volatility, flexibility in adjusting the magnitude and speed of magnetic modulation, and energy efficiency. Since magneto-ionics depends on factors like ionic radius and electronegativity, identifying alternative mobile ions is crucial to embrace new phenomena and applications. Here, the feasibility of C as a prospective magneto-ionic ion is investigated in a Fe-C system by electrolyte gating. In contrast to most magneto-ionic systems, Fe-C presents a reversible dual-ion mechanism: Fe and C act as cation and anion, respectively, moving uniformly in opposite directions under an applied electric field. This leads to a significant increase in saturation magnetization ( > 5-fold) with magneto-ionic rates larger than 1 emu·cm-3·s-1, and a 25-fold increase in coercivity. Since carbides exhibit minimal cytotoxicity, this introduces a biocompatible dimension to magneto-ionics, paving the way for the convergence of spintronics and biotechnology., Financial support by the National Natural Science Foundation Research Funding, China, (Grant No. 52503312), Zhejiang Key Laboratory of Extreme Environment Functional Materials and the Zhejiang Provincial Postdoctoral Research Project First-Class Funding, China, (Grant No. ZJ2024029), European Union’s Horizon 2020 Research and Innovation Program (BeMAGIC European Training Network, ETN/ITN Marie Skłodowska–Curie grant N° 861145), the DOCFAM-PLUS within HORIZON-MSCA-2021-COFUND-01 (grant N° 101081337), the European Research Council (2021-ERC-Advanced REMINDS Grant N° 101054687), the Spanish Government (PID2024-156385OB-I00, PID2023-150721OB-I00, PDC2023-145874-I00, PID2023-147211OB-C21 and CEX2023-001263-S), the Generalitat de Catalunya (2021-SGR-00651 and 2021-SGR-00804), the MCIN/AEI/10.13039/501100011033 & European Union NextGenerationEU/PRTR (grant N° CNS2022-135230), and France 2030 government grant managed by the French National Research Agency PEPR SPIN ANR-22-EXSP 0009 (SPINTHEORY), is acknowledged. ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centers of Excellence program, Grant CEX2021-001214-S, grant funded by MCIU/AEI/10.13039/501100011033. Authors acknowledge the use of instrumentation financed through Grant IU16-014206 (METCAM-FIB) to ICN2, funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. The XAS experiments were performed at BL29-BOREAS beamline at ALBA Synchrotron with the collaboration of ALBA staff under the in-house research proposal 2023027292. VEPALS were carried out at ELBE from the Helmholtz-Zentrum Dresden – Rossendorf e. V., a member of the Helmholtz Association. We would like to thank the facility staff for their assistance. We would also like to thank the Micro- and Nanofabrication Lab at Yiwu Research Institute for their technical support. E.M. is a Serra Húnter Fellow., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Voltage-Driven Generation of Ferromagnetism in a Magneto-Ionically Active Antiferromagnet Enabling Room-Temperature Exchange Bias

  • Privitera, Simone
  • Ma, Zheng
  • Gómez-Torres, Hugo
  • Arredondo-López, Aitor
  • Liedke, Maciej O.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Tan, Huan
  • Solsona, Pau
  • Quintana, Alberto
  • Dias, Thiago
  • Gouéré, Diane
  • Monteblanco, Elmer
  • Ravelosona, Dafiné
  • Valle, Nuria del
  • Navau, Carles
  • Lopeandía, Aitor
  • Sort, Jordi
  • Menéndez, Enric
Magneto-ionics-as the voltage-driven control of magnetic properties through ionic motion and redox processes-offers a promising route toward energy-efficient spintronic devices. Exchange bias, being the unidirectional anisotropy arising from interfacial coupling between antiferromagnets and ferromagnets, plays a central role in spintronics. Here, we demonstrate reversible, room-temperature magneto-ionic generation, suppression, and modulation of exchange bias within a 50 nm-thick antiferromagnetic, magneto-ionically active NiCoO layer. Instead of relying on field cooling to set exchange bias, an applied magnetic field during the growth promotes alignment of the antiferromagnetic spin sublattices, producing a preferential unidirectional orientation. Gating drives oxygen-ion migration along columnar grain boundaries, partially reducing NiCoO and forming ferromagnetic NiCo clusters that couple to the antiferromagnetic matrix. The exchange bias can be controlled by tuning the Ni/Co ratio, which adjusts the Néel temperature, and by varying the actuation time and voltage amplitude which control ferromagnetic cluster size. Micromagnetic simulations reveal that the exchange bias originates from the interfacial uncompensated spins exhibiting partial ferromagnetic-like behavior. This single-layer approach, together with the voltage-controlled formation and tuning of exchange bias without heat treatments, simplifies fabrication and offers a framework for low-power antiferromagnetic spintronic devices., Financial support by the DOCFAM-PLUS project, which has received funding from the European Union’s Horizon Europe research and innovation program under the Marie Skłodowska-Curie Actions 2021 COFUND scheme (Grant Agreement No. 101081337), NICKEFFECT (Grant Agreement No. 101058076), the European Research Council (2021-ERC-Advanced ‘REMINDS’ Grant N° 101054687 and 2024-ERC-Proof of Concept ‘SECURE-FLEXIMAG’ Grant N° 101204328), the Spanish Government (PID2024-156385OB-I00 and PID2023-152783OB-I00), the Generalitat de Catalunya (2021-SGR-00651 and 2021-SGR-00644), and the MCIN/AEI/10.13039/501100011033 & European Union NextGenerationEU/PRTR (grant N° CNS2022-135230) is acknowledged. H.G-T. acknowledges support from the Spanish Ministry of Science and Innovation through the FPI fellowship PRE2021-097883. The authors thank ICTS-SB-CSIC, which is part of the ICTs Micronanofabs node supported by the Spanish Ministry of Science, Innovation and Universities (MICIU). We also gratefully acknowledge financial support from the Horizon Europe program (EIC Pathfinder METASPIN (101098651)). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) is funded by the CERCA program/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214 S, funded by MCIU/AEI/10.13039.501100011033. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding Grant IU16-014206 (METCAM-FIB) to ICN2, with the support of Ministry of Research and University, Generalitat de Catalunya. Parts of this research were carried out at ELBE at the Helmholtz-Zentrum Dresden–Rossendorf e. V., a member of the Helmholtz Association. E.M. is a Serra Húnter Fellow., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfur cathodes for next-generation batteries

  • Manzini, Alessandra
  • Martynova, Irina
  • Yu, Jing
  • Bi, Xiaoyu
  • Jacas Biendicho, Jordi
  • Arbiol, Jordi
  • Sun, Qing
  • Zhang, Chaoqi
  • Cabot, Andreu
The global transition toward efficient, sustainable, and cost-effective energy storage is accelerating, driven by efforts to decarbonize key sectors. Among emerging technologies, sulfur-based conversion cathodes have garnered significant attention as promising candidates for next-generation batteries due to their exceptional theoretical energy density, low cost, and material abundance. Their successful deployment could advance critical applications, including electric mobility, renewable energy integration, and grid stabilization. Despite this potential, sulfur cathodes face persistent limitations that have prevented commercialization. Unlike reviews focusing primarily on materials innovations in idealized settings, this work provides a critical, user-focused assessment that prioritizes challenges of scalable manufacturing and operation under practical conditions. We analyze fundamental failure mechanisms under realistic parameters, including high sulfur loading, lean electrolyte, and limited lithium anode excess, that cause performance to diverge dramatically from target metrics. By synthesizing recent advancements in mechanistic understanding, host design, and interface engineering, we identify key bottlenecks hindering large-scale production. The review concludes with strategic pathways spanning materials design, device architecture, and market integration to bridge the gap between laboratory research and real-world application., IREC acknowledges financial support from the European Union (Grant agreement No. 101104006 - HEALINGBAT - HORIZON-CL5-2022-D2-01). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). I. M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101081337. J.Y. thanks the China Scholarship Council for the financial support. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from the Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM217. Co-funded by the European Union. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Executive Agency. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed