Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hydrogen Evolution Reaction of Electrodeposited Ni-W Films in Acidic Medium and Performance Optimization Using Machine Learning

  • de Paz Castany, Roger|||0000-0003-4211-2636
  • Eiler, Konrad|||0000-0001-8648-6395
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Lekka, Maria|||0000-0001-6811-3843
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Brunin, Guillaume|||0000-0002-5685-4668
  • Rignanese, Gian-Marco|||0000-0002-1422-1205
  • Waroquiers, David|||0000-0001-8943-9762
  • Collet, Thomas|||0000-0002-5503-6444
  • Hubin, Annick
  • Pellicer, Eva|||0000-0002-8901-0998
Ni-W alloy films were electrodeposited from a gluconate aqueous bath at pH=5.0, at varying current densities and temperatures. While there is little to no difference in composition, i. e., all films possess ~12 at.% W, their activity at hydrogen evolution reaction (HER) in acidic medium is greatly influenced by differences in surface morphology. The kinetics of HER in 0.5 M HSO indicates that the best performing film was obtained at a current density of -4.8 mA/cm and 50 °C. The Tafel slopes (b) and the overpotentials at a geometric current density of -10 mA/cm (η) obtained for 200 cycles of linear sweep voltammetry (LSV) from a set of films deposited using different parameters were fed into a machine learning algorithm to predict optimum deposition conditions to minimize b, η, and the degradation of samples over time. The optimum deposition conditions predicted by the machine learning model led to the electrodeposition of Ni-W films with superior performance, exhibiting b of 33-45 mV/dec and an η of 0.09-0.10 V after 200 LSVs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mesoporous Ni-Pt nanoparticles on Ni foam by electrodeposition, Dual porosity for efficient alkaline hydrogen evolution

  • Eiler, Konrad|||0000-0001-8648-6395
  • Alcaide, Francisco|||0000-0002-3373-3978
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In order to maximise electrochemically active surface area for water splitting, mesoporous Ni-Pt nanoparticles (NPs) are electrodeposited onto open-cell Ni foam to obtain a dual (macro- and meso-) porosity. Homogeneous deposition of the NPs is achieved by the use of a cylindrical Pt-coated mesh counter electrode, establishing a uniform electric field around the Ni foam substrate during electrodeposition. The Ni/Pt ratio is tunable with the electrodeposition parameters and all NPs are single-phase face-centred cubic solid solution and nanocrystalline, with a pore size of approx. 10 nm. Ni foam decorated with the Ni-rich particles, with mean particle sizes ranging from 50 to 80 nm, shows significantly higher activity at hydrogen evolution reaction (HER) in alkaline media with respect to the bare Ni foam. The highest HER efficiency was found fora relatively low Pt content of the NPs of about 26 at% (i. e., at 74 at% Ni) with an improvement of a factor 8 over bare Ni foam after durability assessment. These improvements are attributed to the higher surface area thanks to the NP structure, the dual porosity, and the alloying with Pt.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magneto-Ionic Engineering of Antiferromagnetically RKKY-Coupled Multilayers

  • Ma, Zheng|||0000-0003-3655-1448
  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Wrona, Jerzy
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Langer, Juergen|||0000-0002-6319-8259
  • Berthold, Ocker
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Voltage-driven ion motion offers a powerful means to modulate magnetism and spin phenomena in solids, a process known as magneto-ionics, which holds great promise for developing energy-efficient next-generation micro- and nano-electronic devices. Synthetic antiferromagnets (SAFs), consisting of two ferromagnetic layers coupled antiferromagnetically via a thin non-magnetic spacer, offer advantages such as enhanced thermal stability, robustness against external magnetic fields, and reduced magnetostatic interactions in magnetic tunnel junctions. Despite its technological potential, magneto-ionic control of antiferromagnetic coupling in multilayers (MLs) has only recently been explored and remains poorly understood, particularly in systems free of platinum-group metals. In this work, room-temperature voltage control of Ruderman-Kittel-Kasuya-Yosida (RKKY) interactions in Co/Ni-based SAFs is achieved. Transitions between ferrimagnetic (uncompensated) and antiferromagnetic (fully compensated) states is observed, as well as significant modulation of the RKKY bias field offset, emergence of additional switching events, and formation of skyrmion-like or pinned domain bubbles under relatively low gating voltages. These phenomena are attributed to voltage-driven oxygen migration in the MLs, as confirmed through microscopic and spectroscopic analyses. This study underscores the potential of voltage-triggered ion migration as a versatile tool for post-synthesis tuning of magnetic multilayers, with potential applications in magnetic-field sensing, energy-efficient memories and spintronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Composition-Dependent Voltage-Driven OFF-ON Switching of Ferromagnetism in Co-Ni Oxide Microdisks

  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Eiler, Konrad|||0000-0001-8648-6395
  • Quintana, Alberto|||0000-0002-9813-735X
  • Rius, Gemma|||0000-0003-0552-1043
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Salicio-Paz, Asier|||0000-0002-0500-6634
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Lekka, Maria|||0000-0001-6811-3843
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Brunin, Guillaume|||0000-0002-5685-4668
  • Waroquiers, David|||0000-0001-8943-9762
  • Rignanese, Gian-Marco|||0000-0002-1422-1205
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics, which refers to the modification of the magnetic properties of materials through electric-field-induced ion migration, is emerging as one of the most promising methods to develop nonvolatile energy-efficient memory and spintronic and magnetoelectric devices. Herein, the controlled generation of ferromagnetism from paramagnetic Co-Ni oxide patterned microdisks (prepared upon thermal oxidation of metallic microdisks with dissimilar Co-Ni ratios, i.e., NiCo and NiCo) is demonstrated under the action of voltage. The effect is related to the partial reduction of the oxide phases to their metallic forms. Samples richer in Co show stronger magneto-ionic activity, which manifests in lower-onset threshold voltages, faster switching rates, and larger values of the attained saturation magnetization. By means of scanning electron microscopy, a cobalt segregation phenomenon has been experimentally observed upon thermal oxidation, which has been theoretically discussed from the diffusivities' viewpoint. X-ray diffraction characterization has revealed transitions between purely mixed Ni and Co oxides, in the OFF state, to a mixture of oxide and metallic phases, in the ON state, because of the oxygen ion motion outward/inward the Co-Ni oxide microdisks, depending on the voltage polarity. Ab initio calculations reveal that the energy barrier for oxygen vacancy migration is lower in CoO than in NiO, in agreement with the obtained magneto-ionic responses. The observation of magneto-ionic effects in patterned disks (and not only in archetypical continuous films) is a step further for the practical utilization of this phenomenon in real miniaturized devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Smart design of porous Ni and Ni-W films with tunable mechanical and magnetic performance

  • de Paz Castany, Roger|||0000-0003-4211-2636
  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Eiler, Konrad|||0000-0001-8648-6395
  • Stenning, Gavin B.G.
  • Hubin, Annick
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Dense and porous Ni and Ni-W alloy films were fabricated via electrodeposition, with the porous structures produced using colloidal crystal templates composed of 20 and 200 nm polystyrene spheres. The study investigates the effects of tungsten content (6-9 wt%) and porosity on the films' mechanical and magnetic properties, as well as their structural stability at elevated temperatures. From a crystallographic viewpoint, both Ni and Ni-W films exhibited a face-centered cubic (fcc) structure, with the diffraction peaks of the Ni-W films shifted toward lower angles due to the alloying of W with Ni. Interestingly, peak splitting was observed in the porous films, which originated from the confined metal growth between the polystyrene spheres. All films were nanocrystalline, with crystallite sizes in the range of 17 - 46 nm. Tungsten addition to nickel enhanced mechanical hardness but decreased magnetic moment and Curie temperature. Porosity, on the other hand, introduced new magnetic contributions not observed in dense films, including superparamagnetic behavior in the Ni-W films with 200 nm-size porosity. Thermal analysis revealed that the porous Ni-W films were morphologically stable up to 800 K, whereas porosity in pure Ni films degraded at 600 K. These findings highlight the potential of Ni-W coatings with tailored porosity for magnetic microelectromechanical systems and sustainable multi-functional coatings.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Voltage-Driven Generation of Ferromagnetism in a Magneto-Ionically Active Antiferromagnet Enabling Room-Temperature Exchange Bias

  • Privitera, Simone|||0009-0000-0389-727X
  • Ma, Zheng|||0000-0003-3655-1448
  • Gómez-Torres, Hugo|||0000-0002-2857-7974
  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Tan, Huan|||0000-0002-5579-2127
  • Solsona, Pau|||0000-0001-9274-2447
  • Quintana, Alberto|||0000-0002-9813-735X
  • Dias, Thiago
  • Gouéré, Diane
  • Monteblanco, Elmer Nahuel|||0000-0002-3610-6822
  • Ravelosona, Dafiné
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Magneto-ionics-as the voltage-driven control of magnetic properties through ionic motion and redox processes-offers a promising route toward energy-efficient spintronic devices. Exchange bias, being the unidirectional anisotropy arising from interfacial coupling between antiferromagnets and ferromagnets, plays a central role in spintronics. Here, we demonstrate reversible, room-temperature magneto-ionic generation, suppression, and modulation of exchange bias within a 50 nm-thick antiferromagnetic, magneto-ionically active NiCoO layer. Instead of relying on field cooling to set exchange bias, an applied magnetic field during the growth promotes alignment of the antiferromagnetic spin sublattices, producing a preferential unidirectional orientation. Gating drives oxygen-ion migration along columnar grain boundaries, partially reducing NiCoO and forming ferromagnetic NiCo clusters that couple to the antiferromagnetic matrix. The exchange bias can be controlled by tuning the Ni/Co ratio, which adjusts the Néel temperature, and by varying the actuation time and voltage amplitude which control ferromagnetic cluster size. Micromagnetic simulations reveal that the exchange bias originates from the interfacial uncompensated spins exhibiting partial ferromagnetic-like behavior. This single-layer approach, together with the voltage-controlled formation and tuning of exchange bias without heat treatments, simplifies fabrication and offers a framework for low-power antiferromagnetic spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Voltage control of magnetism in Ni-Co oxide mesoporous films, impact of porosity on oxygen magneto-ionics performance

  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Eiler, Konrad|||0000-0001-8648-6395
  • Quintana, Alberto|||0000-0002-9813-735X
  • Ma, Zheng|||0000-0003-3655-1448
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Control of magnetism through electric-field-driven migration of ions, referred to as magneto-ionics (MI), holds promise for the development of non-volatile energy-efficient memory storage, as well as spintronic, neuromorphic and magnetoelectric devices. Here, we study the MI phenomena in 350 nm thick NiCo oxide films with varying degrees of porosity, obtained by electrodeposition of the parent Ni-Co metallic alloy on metallized Si substrate and subsequent annealing in air. Annealing at 450 °C of the film electrodeposited from a P-123-containing electrolyte with Ni and Co sulfate salts yields a Ni-Co oxide that partially retains its mesoporosity. This sample exhibits a higher MI response compared to a low-porosity (nearly dense) Ni-Co oxide film, indicating that an increased surface-to-volume ratio enhances MI. Comprehensive characterization of the mesoporous Ni-Co oxide-coated Si/Ti/Au sample reveals that annealing not only oxidizes the top ≈100 nm of the Ni-Co film but also induces silicon diffusion. MI phenomena occur via O migration out of and into the top Ni-Co oxide layer under negative and positive biasing, respectively. While the system shows some irreversibility, endurance improves significantly as cycling frequency increases, evidencing the potential of this material for voltage-tunable memory applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PS-b-P4VP block copolymer micelles as a soft template to grow openly porous nickel films for alkaline hydrogen evolution

  • Fagotto Clavijo, Roberto
  • Riba Moliner, Marta
  • González Campo, Arántzazu
  • Sort, Jordi
  • Pellicer, Eva
  • Eiler, Konrad
Highly porous Ni films have been potentiostatically synthesised by micelle-assisted electrodeposition using custom-made PS-b-P4VP block copolymer micelles as a soft template. Two PS-b-P4VP block copolymers with PS/P4VP block ratios of 1:1 and 1:4 were used for the micelle-assisted electrodeposition, resulting in Ni films with large pores of diameters varying from 25 to 600 nm (1:1), and from 10 to 230 nm (1:4). As a result of the interconnected porosity, and hence the drastic increase of the surface-to-volume ratio, the electrocatalytic performance at hydrogen evolution reaction (HER) in alkaline media is significantly improved in comparison to a dense Ni film, and—more importantly—even in comparison to a highly mesoporous Ni film with monodisperse 10 nm wide pores. Most remarkably, it is discovered that the openly porous Ni electrocatalysts not only lead to a simple increase in HER current density, but also to a lower overpotential and a better long-term performance. While the bulk of the films is metallic, Ni(OH)2 is formed on the surfaces of all Ni films during HER. This effect leads to an initial decrease of the catalytic activity, but provides excellent stability in alkaline media. The presented synthesis process for pure Ni may be readily adopted to any other electroplatable metals and alloys., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101058076 and the Marie Skłodowska-Curie grant agreement No 764977. Additional funding was obtained from the Generalitat de Catalunya under project 2017-SGR-292 and the Spanish Government under PID2019–108794 GB-I00, PID2020–116844RB-C21, and associated FEDER Project. KE acknowledges the Spanish Ministerio de Universidades for a Margarita Salas fellowship, financed by the European Union – NextGenerationEU. AGC acknowledges financial support from the Spanish Ministry of Science through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE, 2020–2023)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Voltage-Driven Generation of Ferromagnetism in a Magneto-Ionically Active Antiferromagnet Enabling Room-Temperature Exchange Bias

  • Privitera, Simone
  • Ma, Zheng
  • Gómez-Torres, Hugo
  • Arredondo-López, Aitor
  • Liedke, Maciej O.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Tan, Huan
  • Solsona, Pau
  • Quintana, Alberto
  • Dias, Thiago
  • Gouéré, Diane
  • Monteblanco, Elmer
  • Ravelosona, Dafiné
  • Valle, Nuria del
  • Navau, Carles
  • Lopeandía, Aitor
  • Sort, Jordi
  • Menéndez, Enric
Magneto-ionics-as the voltage-driven control of magnetic properties through ionic motion and redox processes-offers a promising route toward energy-efficient spintronic devices. Exchange bias, being the unidirectional anisotropy arising from interfacial coupling between antiferromagnets and ferromagnets, plays a central role in spintronics. Here, we demonstrate reversible, room-temperature magneto-ionic generation, suppression, and modulation of exchange bias within a 50 nm-thick antiferromagnetic, magneto-ionically active NiCoO layer. Instead of relying on field cooling to set exchange bias, an applied magnetic field during the growth promotes alignment of the antiferromagnetic spin sublattices, producing a preferential unidirectional orientation. Gating drives oxygen-ion migration along columnar grain boundaries, partially reducing NiCoO and forming ferromagnetic NiCo clusters that couple to the antiferromagnetic matrix. The exchange bias can be controlled by tuning the Ni/Co ratio, which adjusts the Néel temperature, and by varying the actuation time and voltage amplitude which control ferromagnetic cluster size. Micromagnetic simulations reveal that the exchange bias originates from the interfacial uncompensated spins exhibiting partial ferromagnetic-like behavior. This single-layer approach, together with the voltage-controlled formation and tuning of exchange bias without heat treatments, simplifies fabrication and offers a framework for low-power antiferromagnetic spintronic devices., Financial support by the DOCFAM-PLUS project, which has received funding from the European Union’s Horizon Europe research and innovation program under the Marie Skłodowska-Curie Actions 2021 COFUND scheme (Grant Agreement No. 101081337), NICKEFFECT (Grant Agreement No. 101058076), the European Research Council (2021-ERC-Advanced ‘REMINDS’ Grant N° 101054687 and 2024-ERC-Proof of Concept ‘SECURE-FLEXIMAG’ Grant N° 101204328), the Spanish Government (PID2024-156385OB-I00 and PID2023-152783OB-I00), the Generalitat de Catalunya (2021-SGR-00651 and 2021-SGR-00644), and the MCIN/AEI/10.13039/501100011033 & European Union NextGenerationEU/PRTR (grant N° CNS2022-135230) is acknowledged. H.G-T. acknowledges support from the Spanish Ministry of Science and Innovation through the FPI fellowship PRE2021-097883. The authors thank ICTS-SB-CSIC, which is part of the ICTs Micronanofabs node supported by the Spanish Ministry of Science, Innovation and Universities (MICIU). We also gratefully acknowledge financial support from the Horizon Europe program (EIC Pathfinder METASPIN (101098651)). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) is funded by the CERCA program/Generalitat de Catalunya and is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214 S, funded by MCIU/AEI/10.13039.501100011033. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding Grant IU16-014206 (METCAM-FIB) to ICN2, with the support of Ministry of Research and University, Generalitat de Catalunya. Parts of this research were carried out at ELBE at the Helmholtz-Zentrum Dresden–Rossendorf e. V., a member of the Helmholtz Association. E.M. is a Serra Húnter Fellow., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Composition-Dependent Voltage-Driven OFF-ON Switching of Ferromagnetism in Co-Ni Oxide Microdisks

  • Arredondo-López, Aitor
  • Eiler, Konrad
  • Quintana, Alberto
  • Rius, Gemma
  • Spasojevic, Irena
  • Salicio, Asier
  • Nicolenco, Aliona
  • Lekka, Maria
  • García-Lecina, Eva
  • Brunin, Guillaume
  • Waroquiers, David
  • Rignanese, Gian-Marco
  • Pellicer, Eva
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionics, which refers to the modification of the magnetic properties of materials through electric-field-induced ion migration, is emerging as one of the most promising methods to develop nonvolatile energy-efficient memory and spintronic and magnetoelectric devices. Herein, the controlled generation of ferromagnetism from paramagnetic Co-Ni oxide patterned microdisks (prepared upon thermal oxidation of metallic microdisks with dissimilar Co-Ni ratios, i.e., Ni25Co75 and Ni50Co50) is demonstrated under the action of voltage. The effect is related to the partial reduction of the oxide phases to their metallic forms. Samples richer in Co show stronger magneto-ionic activity, which manifests in lower-onset threshold voltages, faster switching rates, and larger values of the attained saturation magnetization. By means of scanning electron microscopy, a cobalt segregation phenomenon has been experimentally observed upon thermal oxidation, which has been theoretically discussed from the diffusivities' viewpoint. X-ray diffraction characterization has revealed transitions between purely mixed Ni and Co oxides, in the OFF state, to a mixture of oxide and metallic phases, in the ON state, because of the oxygen ion motion outward/inward the Co-Ni oxide microdisks, depending on the voltage polarity. Ab initio calculations reveal that the energy barrier for oxygen vacancy migration is lower in CoO than in NiO, in agreement with the obtained magneto-ionic responses. The observation of magneto-ionic effects in patterned disks (and not only in archetypical continuous films) is a step further for the practical utilization of this phenomenon in real miniaturized devices., The authors also acknowledge financial support from PID2020-116844RB-C21, PID2020 116844RB-C22, 2021-SGR-00651, MCIN/AEI/10.13039/501100011033 and European Union NextGeneration/PRTR (grant CNS2022-135230), PDC2021-121276-C31, PDC2021-121276-C32 and the European Research Council (2021-ERC-Advanced “REMINDS” N° 101054687) grants. E.M. is a Serra Húnter Fellow. G.R. acknowledges Ayudas Ramon y Cajal ref. RyC-2026-21412 and access to the Spanish ICTS Network MICRONANOFABS. The IMB-CNM-CSIC is supported by the María de Maetzu Centres of Excellence programme ref. CEX2023-001397-M funded by MCINN-AEI. We also acknowledge the equipment and service provided by the Surface Analysis Unit of the CCiTUB in the work for the XPS analysis carried out. The HRTEM characterization was performed at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Voltage control of magnetism in Ni-Co oxide mesoporous films: impact of porosity on oxygen magneto-ionics performance

  • Arredondo-López, Aitor
  • Eiler, Konrad
  • Quintana, Alberto
  • Ma, Zheng
  • Liedke, Maciej O.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Menéndez, Enric
  • Sort, Jordi
  • Pellicer, Eva
Data for this article is made available at https://dataverse.csuc.cat/, Control of magnetism through electric-field-driven migration of ions, referred to as magneto-ionics (MI), holds promise for the development of non-volatile energy-efficient memory storage, as well as spintronic, neuromorphic and magnetoelectric devices. Here, we study the MI phenomena in 350 nm thick Ni55Co45 oxide films with varying degrees of porosity, obtained by electrodeposition of the parent Ni-Co metallic alloy on metallized Si substrate and subsequent annealing in air. Annealing at 450 °C of the film electrodeposited from a P-123-containing electrolyte with Ni and Co sulfate salts yields a Ni-Co oxide that partially retains its mesoporosity. This sample exhibits a higher MI response compared to a low-porosity (nearly dense) Ni-Co oxide film, indicating that an increased surface-to-volume ratio enhances MI. Comprehensive characterization of the mesoporous Ni-Co oxide-coated Si/Ti/Au sample reveals that annealing not only oxidizes the top ≈100 nm of the Ni-Co film but also induces silicon diffusion. MI phenomena occur via O2- migration out of and into the top Ni-Co oxide layer under negative and positive biasing, respectively. While the system shows some irreversibility, endurance improves significantly as cycling frequency increases, evidencing the potential of this material for voltage-tunable memory applications., This work has received funding from Horizon Europe under grant agreement No 101058076 – NICKEFFECT. Views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or HADEA. Neither the European Union nor HADEA can be held responsible for them. The authors also acknowledge financial support from PID2024-156385OB-I00, 2021-SGR-00651, MCIN/AEI/10.13039/501100011033 and European Union NextGeneration/PRTR (grant CNS2022-135230) and the European Research Council (2021-ERC-Advanced “REMINDS” N°101054687) grants. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. E.M. is a Serra Húnter Fellow. We also acknowledge the equipment and service provided by the Surface Analysis Unit of the CCiTUB in the work for the XPS analysis carried out. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Parts of this research were carried out at ELBE at the Helmholtz-Zentrum Dresden – Rossendorf e. V., a member of the Helmholtz Association. We would like to thank the facility staff for assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrodeposited Nickel–Tungsten Alloy Films With Multiporous Architecture for Hydrogen Evolution Reaction in Acidic Media

  • Paz-Castany, Roger de
  • Eiler, Konrad
  • Pané, Salvador
  • Sort, Jordi
  • Hubin, Annick
  • Pellicer, Eva
The data that support the findings of this study are available on request from the corresponding author. The data are not publicly available due to privacy or ethical restrictions., Porous Ni–W alloy films were fabricated by electrodeposition from a gluconate-based electrolyte using three approaches: (i) micelle-assisted deposition with Pluronic P-123, (ii) colloidal crystal templating, and (iii) a combination of both. Hierarchically porous films were produced either by plating from a P-123-containing electrolyte onto substrates patterned with 200 nm polystyrene spheres, or from a P-123-free electrolyte onto substrates patterned with mixed 20 and 200 nm spheres. Dense Ni–W films were deposited under comparable conditions for reference. The tungsten content ranged from 1 to 19 wt.% depending on the method. All coatings were nanocrystalline single-phase face-centered cubic alloys, with diffraction peaks shifting to lower 2θ values as W content increased. Electrochemical evaluation of the hydrogen evolution reaction in 0.5 M H2SO4 revealed superior catalytic performance for the multiporous films templated with 20 and 200 nm spheres, achieving an overpotential (η10) of 300 mV versus reversible hydrogen electrode at −10 mA cm–2 and a Tafel slope of ∼134 mV dec–1. The enhanced activity was attributed to the combined effect of high surface area and increased W content, while long-term durability improved primarily with higher W content, as confirmed by 24 h potentiometry at −10 mA cm–2., This work has received funding from Horizon Europe under grant agreement No 101058076-NICKEFFECT. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or European Health and Digital Executive Agency (HaDEA). Neither the European Union nor HaDEA can be held responsible for them. Additional funding was obtained from the Generalitat de Catalunya under project 2021-SGR-00651 and the Spanish Government under PID2024-156385OB-I00. KE acknowledges the Spanish Ministerio de Universidades for a Margarita Salas fellowship, financed by the European Union–NextGenerationEU. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., This study was supported by European Commission (101058076), Direcció General de Recerca, Generalitat de Catalunya (2021-SGR-00651), Ministerio de Ciencia, Innovación y Universidades (PID2024-156385OB-I00), European Regional Development Fund (IU16-014206)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

PS-b-P4VP block copolymer micelles as a soft template to grow openly porous nickel films for alkaline hydrogen evolution

  • Fagotto Clavijo, Roberto
  • Riba-Moliner, Marta
  • González Campo, Arántzazu|||0000-0002-1209-8119
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • Eiler, Konrad|||0000-0001-8648-6395
Highly porous Ni films have been potentiostatically synthesised by micelle-assisted electrodeposition using custom-made PS-b-P4VP block copolymer micelles as a soft template. Two PS-b-P4VP block copolymers with PS/P4VP block ratios of 1:1 and 1:4 were used for the micelle-assisted electrodeposition, resulting in Ni films with large pores of diameters varying from 25 to 600 nm (1:1), and from 10 to 230 nm (1:4). As a result of the interconnected porosity, and hence the drastic increase of the surface-to-volume ratio, the electrocatalytic performance at hydrogen evolution reaction (HER) in alkaline media is significantly improved in comparison to a dense Ni film, and-more importantly-even in comparison to a highly mesoporous Ni film with monodisperse 10 nm wide pores. Most remarkably, it is discovered that the openly porous Ni electrocatalysts not only lead to a simple increase in HER current density, but also to a lower overpotential and a better long-term performance. While the bulk of the films is metallic, Ni(OH)2 is formed on the surfaces of all Ni films during HER. This effect leads to an initial decrease of the catalytic activity, but provides excellent stability in alkaline media. The presented synthesis process for pure Ni may be readily adopted to any other electroplatable metals and alloys.