Skip to main content

CRIBADO DE SISTEMAS BASADOS EN MOLECULAS CURCUMINOIDES PARA LA CREACION DE MATERIALES SENSORES

PID2019-108794GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin-Phonon Coupling and Slow-Magnetic Relaxation in Pristine Ferrocenium

  • Amoza, Martín
  • Maxwell, Lindley
  • Aliaga Alcalde, Nuria
  • Gómez-Coca, Silvia
  • Ruiz, Eliseo
We report the spin dynamic properties of non-substituted ferrocenium complexes. Ferrocenium shows a field-induced single-molecule magnet behaviour in DMF solution while cobaltocene lacks slow spin relaxation neither in powder nor in solution. Multireference quantum mechanical calculations give a non-Aufbau orbital occupation for ferrocenium with small first excitation energy that agrees with the relatively large measured magnetic anisotropy for a transition metal S=1/2 system. The analysis of the spin relaxation shows an important participation of quantum tunnelling, Raman, direct and local-mode mechanisms which depend on temperature and the external field conditions. The calculation of spin-phonon coupling constants for the vibrational modes shows that the first vibrational mode, despite having a low spin-phonon constant, is the most efficient process for the spin relaxation at low temperatures. In such conditions, vibrational modes with higher spin-phonon coupling constants are not populated. Additionally, the vibrational energy of this first mode is in excellent agreement with the experimental fitted value obtained from the local-mode mechanism., The research reported here was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (grants PGC2018-093863-B-C21, PID2019-108794GB-I00 and centres of excellence MDM-2017-0767 and Severo Ochoa FUNFUTURE (CEX2019-000917-S). E.R. thanks Generalitat de Catalunya for an ICREA Academia award and for the SGR2017-1289 and -1277 grants. S.G.-C. thanks the Generalitat de Catalunya for a Beatriu de Pinòs grant. M.A. acknowledges the Ministerio de Educación, Cultura y Deporte for an FPU predoctoral grant. Authors acknowledge computer resources, technical expertise and assistance provided by the CSUC. We want to thank Prof. Santiago Alvarez for his help with the Shape code., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supramolecular Hydrogels Consisting of Nanofibers Increase the Bioavailability of Curcuminoids in Inflammatory Skin Diseases

  • Limón, David
  • Gil Lianes, Pablo
  • Rodríguez Cid, Laura
  • Alvarado, Helen-Lissette
  • Díaz Garrido, Natalia
  • Mallandrich, Mireia
  • Baldomà, Laura
  • Calpena-Campmany, Ana Cristina
  • Domingo Pascual, M. Concepción
  • Aliaga Alcalde, Nuria
  • González Campo, Arántzazu
  • Pérez-García, Lluïsa
The low bioavailability of curcuminoids (CCMoids) limits their use in the treatment of inflammatory skin diseases. Our work shows that this constraint can be overcome upon their incorporation into supramolecular hydrogels assembled from a gemini-imidazolium amphiphilic gelator. Three structural CCMoid analogues were used to prepare supramolecular hydrogels, and it was observed that the concentration of both the gelator and CCMoid and the proportion of solvents influence the self-assembly process. Moreover, the mechanical properties of the nanostructured gels were studied to find the optimum gels, which were then further characterized microscopically, and their ability to release the CCMoid was evaluated. The physicochemical properties of the CCMoids play a fundamental role in the interaction with the gelator, influencing not only the gelation but also the morphology at the microscopic level, the mechanical properties, and the biopharmaceutical behavior such as the amount of CCMoid released from the gels. The nanostructured supramolecular hydrogels, which contain the CCMoids at much lower concentrations (μg/mL) in comparison to other products, promote the penetration of the CCMoids within the skin, but not their transdermal permeation, thus preventing any possible systemic effects and representing a safer option for topical administration. As a result, the CCMoid-containing hydrogels can effectively reduce skin inflammation in vivo, proving that these supramolecular systems are excellent alternatives in the treatment of inflammatory skin diseases., This work was supported by the projects PID2020-115663GB-C3-2, PID2019-108794GB-I00, and PID2020–115631GB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. We thank AGAUR for a grant to consolidated research groups 2017SGR1277. A.G.-C. and N.A.-A. acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE) (2020-2023). A.G.-C. also acknowledges a Ramon y Cajal Grant (RYC-2017-22910)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Luminescence of Macrocyclic Mononuclear DyIII Complexes and Their Immobilization on Functionalized Silicon-Based Surfaces

  • Gil, Yolimar
  • Gimeno Muñoz, Raquel
  • Santana, Ricardo Costa de
  • Aliaga Alcalde, Nuria
  • Fuentealba, Pablo
  • Aravena, Daniel
  • González Campo, Arántzazu
  • Spodine, Evgenia
Two mononuclear DyIII complexes, [Dy(L1)(NCS)3] (Dy-EDA) and [Dy(L2)(NCS)3] (Dy-DAP), where Ln (n = 1-2) corresponds to a macrocyclic ligand derived from 2,6-pyridinedicarboxaldehyde and ethylenediamine (L1) and 1,3-diaminepropane (L2) were immobilized on functionalized silicon-based surfaces. This was achieved by the microcontact printing (μCP) technique, generating patterns on a functionalized surface via covalent bond formation through the auxiliary -NCS ligands present in the macrocyclic complex species. With this strategy, it was possible to control the position of the immobilized molecules on the surface. Water contact angle measurements, X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectra (IRRAS), and atomic force microscopy (AFM) confirmed that the surfaces were successfully functionalized. Furthermore, the optical properties in a broad temperature range were investigated for the as-prepared compounds. At room temperature, Dy-EDA was shown to emit in the deep blue region (Commission Internationald'Eclairage (CIE): (0.175, 0.128)), while Dy-DAP in the white region (CIE: (0.252, 0.312)). The different CIE values were due to the contribution of the strong emission of the ligand in the case of Dy-EDA. Besides, surface photoluminescence measurements showed that the immobilized complexes retained their bulk emissive properties., D.A. and E.S. thank FONDECYT 1210325 and 1200033 projects for financial support. Y.G. thanks the National Agency for Research and Development (ANID) for the Doctoral Scholarship 21170520. Y.G. and E.S. are members of CEDENNA; Financiamiento Basal AFB 180001. N.A.-A. and R.G. thank the European Research Council (ERC) under the European Union’s Horizon 2020 R&D programme (ERC-724981). This work was supported by the project PID2019-108794GB-I00 (MCIN/AEI/10.13039/501100011033) from the Ministerio de Ciencia e Innovación. A.G.-C. and N.A.-A. acknowledge financial support from the Spanish Ministry of Science through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE, 2020–2023). R.C.d.S. thanks CNPq, Brazil., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intrinsic Permeation and Anti-Inflammatory Evaluation of Curcumin, Bisdemethoxycurcumin and Bisdemethylcurcumin by a Validated HPLC-UV Method

  • Alvarado, Helen-Lissette
  • Limón, David
  • Calpena-Campmany, Ana Cristina
  • Mallandrich, Mireia
  • Rodríguez Cid, Laura
  • Aliaga Alcalde, Nuria
  • González Campo, Arántzazu
  • Pérez-García, Lluïsa
Curcumin shows anti-inflammatory activity, and it has been widely investigated for neurodegenerative diseases, adjuvant treatment in AIDS and antitumor activity against different tumors, among other activities. The goal of this work was to evaluate the capacity of curcumin and its derivatives (bisdemethoxycurcumin and bisdemethylcurcumin) in preventing the irritant effects of topically applied xylol and to assess the intrinsic capacity of curcuminoids in permeating human skin by ex vivo permeation tests. Its secondary goal was to validate an HPLC method to simultaneously determine the curcuminoids in the samples from the ex vivo permeation studies and drug extraction from the skin. Curcuminoid quantification was performed using an RP-C18 column, at isocratic conditions of elution and a detection wavelength of 265 nm. The method was specific with a suitable peak resolution, as well as linear, precise, and accurate in the range of 0.195–3.125 μg/mL for the three curcuminoids. Bisdemethylcurcumin showed the greatest permeation through the human skin, and it was the curcuminoid that was most retained within the human skin. The anti-inflammatory activity of the curcuminoids was evaluated in vivo using a xylol-induced inflammation model in rats. Histological studies were performed to observe any changes in morphology at the microscopic level, and these three curcuminoids were found to be respectful within the skin structure. These results show that these three curcuminoids are suitable for anti-inflammatory formulations for dermal applications, and they can be properly quantified using HPLC-UV., This research was funded by AGAUR, grant number 2017SGR1277. This work was supported by the projects PID2020-115663GB-C3-2, PID2019-108794GB-I00 and PID2020–115631GB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. AGC and NAA thank the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE) (2020-2023). AGC also thanks for the Ramon y Cajal Grant (RYC-2017-22910). The authors also thank Universitat de Barcelona for the financial support for the Open Access publication., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX-2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dielectric behavior of curcuminoid polymorphs on different substrates by direct soft vacuum deposition

  • Riba López, Daniel
  • Zaffino, Rossella
  • Herrera, Daniel
  • Matheu, Roc
  • Silvestri, Francesco
  • Silva, Jesse Ferreira da
  • Sañudo, Eva Carolina
  • Mas Torrent, Marta
  • Barrena, Esther
  • Pfattner, Raphael
  • Ruiz, Eliseo
  • González Campo, Arántzazu
  • Aliaga Alcalde, Nuria
Our work examines the structural-electronic correlation of a new curcuminoid, AlkCCMoid, as a dielectric material on different substrates. For this purpose, we show a homemade sublimation method that allows the direct deposition of molecules on any type of matrix. The electronic properties of AlkCCMoid have been evaluated by measurements on single crystals, microcrystalline powder, and sublimated samples, respectively. GIWAXS studies on surfaces and XRD studies on powder have revealed the existence of polymorphs and the effect that substrates have on curcuminoid organization. We describe the dielectric nature of our system and identify how different polymorphs can affect electronic parameters such as permittivity, all corroborated by DFT calculations., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D program (ERC-724981). This work was also supported by the projects PID2019-108794GB-I00, GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00, and PID2021-122464NB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. E.C.S. acknowledges the financial support from the Spanish Government, (Grant PGC2018-098630-B-I00). R.P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019-028474-I). J.dS. thanks to the MChem program of the University of Southampton. E.R. thanks Generalitat de Catalunya by a ICREA Academia award, Spanish Ministry Science for a Maria de Maeztu excellence grant (MDM-2017-0767), and computer resources, technical expertise and assistance provided by the Barcelona Supercomputing Center. R.M. thanks “la Caixa” Foundation (ID 100010434) for a Junior Leader fellowship (LCF/BQ/PI22/11910024). The crystal structures were collected at beamline XALOC at ALBA Synchrotron (Exp. 2017042211). The CSIC authors acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE,2020-2023). GIWAXS experiments were performed at the beam line BL11 – NCD-SWEET at ALBA Synchrotron with the collaboration of ALBA staff ; we also thank the support from Alba Cazorla., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PS-b-P4VP block copolymer micelles as a soft template to grow openly porous nickel films for alkaline hydrogen evolution

  • Fagotto Clavijo, Roberto
  • Riba Moliner, Marta
  • González Campo, Arántzazu
  • Sort, Jordi
  • Pellicer, Eva
  • Eiler, Konrad
Highly porous Ni films have been potentiostatically synthesised by micelle-assisted electrodeposition using custom-made PS-b-P4VP block copolymer micelles as a soft template. Two PS-b-P4VP block copolymers with PS/P4VP block ratios of 1:1 and 1:4 were used for the micelle-assisted electrodeposition, resulting in Ni films with large pores of diameters varying from 25 to 600 nm (1:1), and from 10 to 230 nm (1:4). As a result of the interconnected porosity, and hence the drastic increase of the surface-to-volume ratio, the electrocatalytic performance at hydrogen evolution reaction (HER) in alkaline media is significantly improved in comparison to a dense Ni film, and—more importantly—even in comparison to a highly mesoporous Ni film with monodisperse 10 nm wide pores. Most remarkably, it is discovered that the openly porous Ni electrocatalysts not only lead to a simple increase in HER current density, but also to a lower overpotential and a better long-term performance. While the bulk of the films is metallic, Ni(OH)2 is formed on the surfaces of all Ni films during HER. This effect leads to an initial decrease of the catalytic activity, but provides excellent stability in alkaline media. The presented synthesis process for pure Ni may be readily adopted to any other electroplatable metals and alloys., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101058076 and the Marie Skłodowska-Curie grant agreement No 764977. Additional funding was obtained from the Generalitat de Catalunya under project 2017-SGR-292 and the Spanish Government under PID2019–108794 GB-I00, PID2020–116844RB-C21, and associated FEDER Project. KE acknowledges the Spanish Ministerio de Universidades for a Margarita Salas fellowship, financed by the European Union – NextGenerationEU. AGC acknowledges financial support from the Spanish Ministry of Science through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE, 2020–2023)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental and theoretical studies of the electronic transport of an extended curcuminoid in graphene nano-junctions

  • Cardona, Teresa
  • Baum, Thomas Y.
  • Zaffino, Rossella
  • Herrera, Daniel
  • Pfattner, Raphael
  • Gómez Coca, Silvia
  • Ruiz, Eliseo
  • González Campo, Arántzazu
  • Zant, Herre S.J. van der
  • Aliaga Alcalde, Núria
Exploiting the potential of curcuminoids (CCMoids) as molecular platforms, a new 3.53 nm extended system (pyACCMoid, 2) has been designed in two steps by reacting a CCMoid with amino-terminal groups (NH2-CCMoid, 1, of 1.79 nm length) with polycyclic aromatic hydrocarbon (PAH) aldehydes. CCMoid 2 contains pyrene units at both ends as anchoring groups to optimize its trapping in graphene nano-junctions created by feedback-controlled electro-burning. The measured I-V characteristics show gate-dependent behaviour at room temperature and 10 K, with increased conductance values compared to shorter CCMoids previously reported, and in agreement with DFT calculations. Our results show that the adjusted molecular design improves the conductance, as system 2 separates the conductive backbone from the anchor groups, which tend to adopt a planar configuration upon contact with the graphene electrodes. DFT calculations using Green functions of a set of different molecular conformations of 2 on graphene electrodes show a direct relationship between the units (e.g. pyrene, amide, etc.), in the molecule, through which electrons are injected and the conductance values; where the size of the spacing between the graphene electrodes contributes but is not the dominant factor, and thus, counter-intuitively the smallest spacing gives one of the lowest conductance values., This work has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 R&D program (ERC-724981) and grant no. 863098 (SPRING). This work was also supported by the projects PID2019-108794GBI00, TED2021-129593B-I00 and PID2021-122464NB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. R. P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019-028474-I). E. R. thanks Generalitat de Catalunya for an ICREA Academia award and 2021-SGR-00286 grant, Spanish Ministry Science for a Maria de Maeztu excellence grant (CEX2021-001202-M), and BSC for computational resources. The CSIC authors acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (MATRANS42, CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonic Coupling for High-Sensitivity Detection of Low Molecular Weight Molecules

  • Guglielmelli, Alexa
  • Zaffino, Rossella
  • Palermo, Giovanna
  • Valente, Liliana
  • Aceti, Dante Maria
  • Ricciardi, Loredana
  • González Campo, Arántzazu
  • Pfattner, Raphael
  • Aliaga Alcalde, Núria
  • Strangi, Giuseppe
This article presents a novel plasmonic sensing platform designed for the detection of low molecular weight molecules, offering significant advancements in diagnostic applications. The platform features a periodic array of gold nanodisks on a 20 nm thin silica layer, supported by a 100 nm thick gold substrate. By leveraging the coupling between localized and propagating surface plasmon resonances, this design significantly enhances the sensitivity and specificity of molecular detection. Finite element method simulations are conducted to characterize the optical properties and reflectance response of the nanodisks array in the visible to near-infrared range. Ellipsometric analysis is performed to measure the reflectance of the sample at various angles. Additionally, scanning near-field optical microscopy in reflectance mode validates the design by revealing well-defined plasmonic hot spots and interference patterns consistent with the simulated results. The findings demonstrate the platform's effectiveness in amplifying optical signals, achieving a limit of detection of 50 μM for molecules with a molecular weight of less than 1 KDa. This high sensitivity and specificity highlight the potential of the proposed plasmonic platform to advance the development of highly sensitive sensors for low molecular weight molecules, making it a valuable tool for diagnostics and precise molecular detection., The authors are grateful to Dr. Giovanni Desiderio for SEM measurements and analysis. A.G. acknowledges financial support from the “NLHT- Nanoscience Laboratory for Human Technologies” - (POR Calabria FESR-FSE 14/20 – CUP: J22C14000230007) and POS RADIOAMICA project funded by the Italian Minister of Health (CUP: H53C22000650006). D.M.A. acknowledges financial support from the project progetto PRIN - 2022P9F79R, (CUP: H53D23000830006). This work was also supported by the projects PID2019-108794GBI00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. The CSIC authors acknowledge the financial support from the Spanish Ministry Science, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence (MATRANS42, CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Curcuminoid-based responsive surfaces for fluorescent BF3 detection, a fast and reversible approach

  • Gimeno-Muñoz, Raquel
  • Díaz-Torres, Raúl
  • Gómez-Coca, Silvia
  • Roubeau, Olivier
  • Díaz-Cruz, José Manuel
  • Aliaga-Alcalde, Núria
  • González-Campo, Arántzazu
The strategic design of a novel curcuminoid (CCMoid), termed PA, containing pyrene units and a terminal carboxylic group provides the necessary tools for its efficient immobilization on surfaces and its potential use as an optical chemosensor. To this end, our work provides a robust methodology for the preparation of CCMoid-based active surfaces with a fluorescent response and reusability. The covalent immobilization of the CCMoid is obtained by the reaction of the acidic groups of PA and the imidazole ends of the previously functionalized substrates. In this way, fluorescent patterned surfaces of PA, whose emission could be observed in the visible region thanks to the pyrene groups of the CCMoid, were obtained using microcontact printing. In addition, the coordination of BF3 molecules (in solution and in gas phase) with the keto-enol moiety of the PAs anchored on the surfaces has been analyzed. The ability of BF3 to modify the optical properties of the CCMoids-based surfaces, leading to emissions in the near-IR, has been identified as a fast and reversible process. Such ability is intrinsic to the final coordinated system and not to other boron-based molecules, providing unique response and sensing surfaces., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D program (ERC-724981). This work was also supported by the projects PID2019-108794GBI00, PID2021-122464NB-I00, PID2023-151929NB-I00 funded by MCIN/AEI/10.13039/501100011033 and Maria de Maeztu CEX2021-001202M from the Ministerio de Ciencia e Innovación. The Generalitat de Catalunya is also acknowledged for the 2021-SGR-01085, 2021-SGR-00286 and 2021SGR00006 grants. This research used resources of the Advanced Light Source, which is a DOE Office of Science User Facility under contract no. DEAC02-05CH11231. The CSIC authors acknowledge the financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001202-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

PS-b-P4VP block copolymer micelles as a soft template to grow openly porous nickel films for alkaline hydrogen evolution

  • Fagotto Clavijo, Roberto
  • Riba-Moliner, Marta
  • González Campo, Arántzazu|||0000-0002-1209-8119
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • Eiler, Konrad|||0000-0001-8648-6395
Highly porous Ni films have been potentiostatically synthesised by micelle-assisted electrodeposition using custom-made PS-b-P4VP block copolymer micelles as a soft template. Two PS-b-P4VP block copolymers with PS/P4VP block ratios of 1:1 and 1:4 were used for the micelle-assisted electrodeposition, resulting in Ni films with large pores of diameters varying from 25 to 600 nm (1:1), and from 10 to 230 nm (1:4). As a result of the interconnected porosity, and hence the drastic increase of the surface-to-volume ratio, the electrocatalytic performance at hydrogen evolution reaction (HER) in alkaline media is significantly improved in comparison to a dense Ni film, and-more importantly-even in comparison to a highly mesoporous Ni film with monodisperse 10 nm wide pores. Most remarkably, it is discovered that the openly porous Ni electrocatalysts not only lead to a simple increase in HER current density, but also to a lower overpotential and a better long-term performance. While the bulk of the films is metallic, Ni(OH)2 is formed on the surfaces of all Ni films during HER. This effect leads to an initial decrease of the catalytic activity, but provides excellent stability in alkaline media. The presented synthesis process for pure Ni may be readily adopted to any other electroplatable metals and alloys.