Skip to main content

FOTOQUIMICA Y ESTABILIDAD DE INTERFASES MODELO ORGANICO/AGUA PARA LA DESCOMPOSICION DEL AGUA

PID2019-110907GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface specificity and mechanistic pathway of defluorination of C60F48 on coinage metals

  • Palacios-Rivera, Rogger
  • Malaspina, David C.
  • Tessler, Nir
  • Solomeshch, Olga
  • Faraudo, Jordi
  • Barrena, Esther
  • Ocal, Carmen
We provide experimental and theoretical understanding on fundamental processes taking place at room temperature when a fluorinated fullerene dopant gets close to a metal surface. By employing scanning tunneling microscopy and photoelectron spectroscopies, we demonstrate that the on-surface integrity of C60F48 depends on the interaction with the particular metal it approaches. Whereas on Au(111) the molecule preserves its chemical structure, on more reactive surfaces such as Cu(111) and Ni(111), molecules interacting with the bare metal surface lose the halogen atoms and transform to C60. Though fluorine–metal bonding can be detected depending on the molecular surface density, no ordered fluorine structures are observed. We show the implications of the metal-dependent de-fluorination in the electronic structure of the molecules and the energy alignment at the molecule–metal interface. Molecular dynamics simulations with ReaxFF reactive force field corroborate the experimental facts and provide a detailed mechanistic picture of the surface-induced de-fluorination, which involves the rotation of the molecule on the surface. Outstandingly, a thermodynamic analysis indicates that the effect of the metal surface is lowering and diminishing the energy barrier for C–F cleave, demonstrating the catalytic role of the surface. The present study contributes to in-depth knowledge of the mechanisms that affect the degree of stability of chemical species on surfaces, which is essential to advance our understanding of the chemical reactivity of metals and their role in on-surface chemical reactions., This work has been supported by the Spanish Government under projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), RTI2018-096273-B-I00, the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and the Generalitat de Catalunya 2017-SGR668. R. P. R. has been developing this work as part of his doctorate in Materials Science at the Universitat Autònoma de Barcelona (UAB). D. C. M. is supported by the European Union's Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie grant agreement No. 6655919. O. S. is grateful for the support by the Center for Absorption in Science of the Ministry of Immigrant Absorption and the Committee for Planning and Budgeting of the Council for Higher Education in Israel under the framework of the KAMEA Program. We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae II. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility. We are grateful to M. Paradinas and A. Mugarza from ICN2 for providing the Ni(111) crystal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing Long-Term Device Stability Using Thin Film Blends of Small Molecule Semiconductors and Insulating Polymers to Trap Surface-Induced Polymorphs

  • Salzillo, Tommaso
  • Campos García, Antonio
  • Babuji, Adara
  • Santiago, Raul
  • Bromley, Stefan T.
  • Ocal, Carmen
  • Barrena, Esther
  • Jouclas, Rémy
  • Ruzié, Christian
  • Schweicher, Guillaume
  • Geerts, Yves Henry
  • Mas Torrent, Marta
The lack of long‐term stability in thin films of organic semiconductors can often be caused by the low structural stability of metastable phases that are frequently formed upon deposition on a substrate surface. Here, thin films of 2,7‐dioctyloxy[1]benzothieno[3,2‐b]benzothiophene (C8O‐BTBT‐OC8) and blends of this material with polystyrene by solution shearing are fabricated. Both types of films exhibit the metastable surface‐induced herringbone phase (SIP) in all the tested coating conditions. The blended films reveal a higher device performance with a field‐effect mobility close to 1 cm2 V−1 s−1, a threshold voltage close to 0 V, and an on/off current ratio above 107. In situ lattice phonon Raman microscopy is used to study the stability of the SIP polymorph. It is found that films based on only C8O‐BTBT‐OC8 slowly evolve to the Bulk cofacial phase, significantly impacting device electrical performance. In contrast, the blended films stabilize the SIP phase, leading to devices that maintain a high performance over 1.5 years. This work demonstrates that blending small‐molecule organic semiconductors with insulating binding polymers can trap metastable polymorphs, which can lead to devices with both improved performance and long‐term stability., T.S. and A.C. contributed equally to this work. This work was funded by the Spanish Ministry projects (FANCY CTQ2016‐80030‐R, GENESIS PID2019‐111682RB‐I00, PID2019‐110907GB‐I00, MICIUN/FEDER RTI2018‐095460‐B‐I00 and MAT2016‐77852‐C2‐1‐R (AEI/FEDER, UE)) the Generalitat de Catalunya (2017‐SGR13, 2017‐SGR‐918 and 2017‐SGR668) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and “María de Maeztu” program for Spanish Structures of Excellence (MDM‐2017‐0767). The authors also thank the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 811284 (UHMob). They also acknowledge access to supercomputer resources as provided through grants from the Red Española de Supercomputación. T.S. acknowledges the H2020‐MSCA‐COFUND‐2014 Programme (P‐SPHERE, Grant agreement 665919). A.B. thanks the Spanish Government financial support through BES‐2016‐077519 FPI fellowship. This work was carried out within the framework of the doctoral program (Ph.D.) of Material Science (Department of Physics and Chemistry) of the Universitat Autonoma de Barcelona (UAB). Y.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi‐Fast no T.0072.18, and 2D to 3D no. 30489208. Financial support from the French Community of Belgian (ARC no. 20061) is also acknowledged. G.S. acknowledges postdoctoral fellowship support from the FNRS. The authors acknowledge Dr. Gemma Rius and CNM‐IMB for the access to the Raman facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the organic semiconductor side groups on the structural and electronic properties of their interface with dopants

  • Babuji, Adara
  • Silvestri, Francesco
  • Pithan, Linus
  • Richard, Audrey
  • Geerts, Yves Henry
  • Tessler, Nir
  • Solomeshch, Olga
  • Ocal, Carmen
  • Barrena, Esther
Two derivatives of [1]benzothieno[3,2-b][1]benzothiophene (BTBT), namely, 2,7-dioctyl-BTBT (C8-BTBT) and 2,7-diphenyl-BTBT (DPh-BTBT), belonging to one of the best performing organic semiconductor (OSC) families, have been employed to investigate the influence of the substitutional side groups on the properties of the interface created when they are in contact with dopant molecules. As a molecular p-dopant, the fluorinated fullerene C60F48 is used because of its adequate electronic levels and its bulky molecular structure. Despite the dissimilarity introduced by the OSC film termination, dopant thin films grown on top adopt the same (111)-oriented FCC crystalline structure in the two cases. However, the early stage distribution of the dopant on each OSC film surface is dramatically influenced by the group side, leading to distinct host–dopant interfacial morphologies that strongly affect the nanoscale local work function. In this context, Kelvin probe force microscopy and photoelectron emission spectroscopy provide a comprehensive picture of the interfacial electronic properties. The extent of charge transfer and energy level alignment between OSCs and dopant are debated in light of the differences in the ionization potential of the OSC in the films, the interface nanomorphology, and the electronic coupling with the substrate., This work has been funded by the Spanish Government through projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S). We thank the 2017-SGR668 recognition. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. F.S. acknowledges the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). O.S. acknowledges the support of the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program. Y.H.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi-Fast no. T.0072.18, and 2Dto3D no. 30489208. Financial supports from the French Community of Belgian (ARC no. 20061) are also acknowledged. A.R. acknowledges doctoral fellowship support from the FRIA. We thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design Dependence of the Interface Structure and Crystalline Order of Organic Semiconductor/Dopant Heterojunctions: Pentacene/C60F48

  • Silvestri, Francesco
  • Linus Pithan
  • Babuji, Adara
  • Ocal, Carmen
  • Barrena, Esther
Planar and mixed heterojunctions are the common architectures respectively used for contact and bulk doping in organic electronics. Beyond the success of empirical methods, knowing how the incorporation of dopant molecules affects the structural properties of the organic semiconductor film is essential for the design optimization of devices with efficient electrical properties. With this aim, we exploit out-of-plane and grazing incidence X-ray diffraction (GIXD) to characterize engineered heterojunctions fabricated on native SiO2 substrates with pentacene as an organic semiconductor and C60F48 as a dopant. A strong interaction between the two species is inferred, which dramatically influences the crystalline order in the different architectures. While C60F48 crystalline domains orient randomly on the SiO2 surface, the ulterior deposition of pentacene is demonstrated to induce the orientational order and reorganization of the underlying C60F48. In the inverse architecture, the highly [001]-oriented pentacene film on SiO2 has a template effect on C60F48, inducing the formation of a face-centered cubic [111]-oriented film and leading to an ordered planar heterostructure. Real-time GIXD reveals the presence of a strained C60F48 layer at the interface with a gradual relaxation and transition to 3D crystallite formation with increasing coverage. When mixed in the bulk by co-evaporation, the dopant adopts an amorphous state, embedded in a polycrystalline pentacene matrix. The interfacial effects reported here would have relevant repercussion on the efficiency of molecular doping, which makes it possible to foresee the establishment of guidelines for device performance improvement through interface engineering., This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S) and by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). The authors also acknowledge the Generalitat de Catalunya grant 2017 SGR668. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autonoma de Barcelona (UAB). A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. The authors thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. The authors are grateful to Nir Tessler and Olga Solomeshch from the Nanoelectronic Center of Technion (Haifa, Israel) for providing the dopant molecule., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From high quality packing to disordered nucleation or phase separation in donor/acceptor interfaces: ClAlPc-C60 on Au(111)

  • Barrena, Esther
  • Palacios-Rivera, Rogger
  • Martínez, José I.
  • Ocal, Carmen
The dramatic consequences that the orientation adopted by the molecular dipoles, in diverse arrays of chloroaluminum phthalocyanine (ClAlPc) on Au(111), have on the ulterior adsorption and growth of C60 are explored by means of an all scanning probe microscopy approach. The unidirectional downwards organization of the molecular dipoles at the first layer reduces charge transfer from the metal to C60. Imbalance between attractive and repulsive interactions of the fullerenes are crucial for their ordered supramolecular aggregation. The effect at the basis of such self-assembling seems to be released by the all upwards dipole orientation adopted on the ClAlPc second layer. The low electronic corrugation of the bilayer repercutes in a higher mobility of the fullerenes which for similar coverages diffuse large distances to reach uncoverd first layer regions. Density functional theory calculations corroborate the experimental observations indicating the relevance of charge transfer, potential energy surface corrugation, C60 on-surface diffusion barriers and screening. The structure of the co-adsorbed C60 and ClAlPc layers strongly depends on the deposition sequence. Phase-separation, where each molecule adopts the single-component assembly, occurs if C60 is deposited first. The present results contribute to understanding the influence of the dipolar nature of molecular layers on the electronic and structure of donor/acceptor heterojunctions, which is crucial for device design via engineering the energy levels algingment at the organic-organic and organic-metal interfaces., This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, MAT2016-77852-C2- 1-R and MAT2017-85089-C2-1-R (AEI/FEDER, UE) and the ‘‘Severo Ochoa’’ Program for Centres of Excellence in R&D (CEX2019-000917-S). We also acknowledge the Generalitat de Catalunya grant 2017 SGR668. J.I.M. acknowledges Comunidad de Madrid via “Programa de Investigación Tecnologías 2018” (FOTOART-CM S2018/NMT-4367), and the EU Innovation Program under grant agreement 881603 (GrapheneCore3- Graphene-based disruptive technologies)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Liquid-Crystalline Non-Fullerene Acceptor Enabling HighPerformance Organic Solar Cells

  • Mondelli, Pierluigi
  • Silvestri, Francesco
  • Ciammaruchi, Laura
  • Solano, Eduardo
  • Beltrán Gracia, Eduardo
  • Barrena, Esther
  • Riede, Moritz
  • Morse, Graham
cThe use of liquid crystalline (LC) compounds in organic photovoltaics has revealed to be an effective strategy to optimise the bulk heterojunction morphology, repairing structural defects through their self-assembling properties. Nonetheless, the design of LC materials has mostly been limited to donor molecules in previous reports. Here we introduce a Non-Fullerene Acceptor (NFA), 4TICO, characterised by an improved structural flexibility, which is imparted by the alkoxy sidechain and favours the formation of LC phases at high temperature. This structural polymorphism also occurs in films where the 4TICO is blended with the PBTZT-stat-BDTT-8 polymer. The high-temperature LC polymorph brings to the formation of a smooth surface morphology with less structural defects, providing solar cells with improved short-circuit current (Jsc) and fill factor (FF), by 14% and 20% respectively. An in-depth investigation of the NFA structural properties in relation to the solar cells performance and charge transport is carried out in comparison to the 4TIC crystalline isomer., P. M. and F. S. acknowledge the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska Curie Grant agreement no. 722651 (SEPOMO) for the support in the realization of this work. This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S) and by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872. E.B. and F.S. also acknowledge the Generalitat de Catalunya grant 2017 SGR668. P.M has carried out his work within the framework of the doctoral program (PhD) in Optics and Photonics of Condensed Matter Physics (Department of Physics) at the Chemnitz University of Technology and F. S. in Material Science (Department of Physics) at the Universitat Autònoma de Barcelona (UAB). GIWAXS experiments were performed at NCD-SWEET beamline at ALBA synchrotron (Beamtime ID: 2019093873) with the collaboration of ALBA staff. The authors thank Dr Pascal Kaienburg of the University of Oxford and Dr Mariano Campoy-Quiles of ICMAB for their valuable suggestions and fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigating the Ubiquitous Presence of Nanometric Water Films on Surfaces

  • Santos, Sergio
  • Amadei, Carlo Alberto
  • Lai, Chia-Yun
  • Olukan, Tuza
  • Lu, Jin-You
  • Font, Josep
  • Barcons, Victor
  • Verdaguer, Albert
  • Chiesa, Matteo
When we speak of nanometric water films on surfaces we are speaking about a truly ubiquitous phenomenon in nature. All surfaces exposed to ambient conditions are covered by a thin film of water that affects or mediates surface chemistry, general physical-chemical processes on surfaces, and even solid–solid interactions. We have investigated this phenomenon for over a decade by exploiting dynamic atomic force microscopy and have (1) described how these layers affect apparent height measurements, (2) analyzed the excitation of subharmonics, (3) investigated its effects on surface functionality over time (“aging”), (4) monitored and quantified the time-dependent wettability of several relevant surfaces such as highly oriented pyrolytic graphite and monolayer systems, and (5) developed high-resolution and highly stable modes of imaging. Here, we discuss these findings to elucidate the present and future of the field. We further provide a brief but general discussion of solvation and hydration layers in vacuum, liquid, and air that center around current controversies and discuss open possibilities in the field., S. Santos, T. Olukan and M. Chiesa acknowledge the support from the Arctic Centre for Sustainable Energy (ARC) at UiTthe Arctic University of Norway through Grant No. 310026. A.V. acknowledges financial support by the Spanish Government under Project No. PID2019-110907GB-I00 and the “‘Severo Ochoa”’ Program for Centres of Excellence in R&D (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface products from de-fluorination of C60F48 on Ag(111): C60, C60Fx and silver fluoride formation

  • Barrena, Esther
  • Palacios-Rivera, Rogger
  • Babuji, Adara
  • Schio, Luca
  • Tormen, Massimo
  • Floreano, Luca
  • Ocal, Carmen
By employing diverse surface sensitive synchrotron radiation spectroscopies we demonstrate that the fluorine content of initial C60F48 deposited at room temperature on Ag(111) varies with molecular coverage. At the very early stages of deposition, C60F48 fully de-fluorinates and transforms into C60. Strong indications of silver fluoride formation are provided. The chemical footprint of fluorinated fullerenes emerges at relatively low molecular coverage indicating that the degree of fullerene de-fluorination decreases (from total to partial de-fluorination) as molecules are deposited. De-fluorination stops well before the substrate surface is completely covered by fullerenes. At the molecular level, the fluorine loss observed by spectroscopic techniques are supported by scanning tunneling microscopy imaging. Both molecules and metal surface are importantly involved in the process., This work has been supported by the Spanish Government under the projects PID2019-110907GB-I00, MAT2017-85089- C2-1-R (AEI/FEDER, UE) and the ‘‘Severo Ochoa’’ Program for Centres of Excellence in R&D (CEX2019-000917-S). This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by CNR-IOM in Trieste and Grenoble within the framework of the NFFA-Europe Transnational Access Activity (ID: 929)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real-Space Image of Charged Patches in Tunable-Size Nanocrystals

  • Martinez Esain, Jordi
  • Pérez Rodríguez, Ana
  • Faraudo, Jordi
  • Barrena, Esther
  • Yáñez, Ramón
  • Ocal, Carmen
  • Ricart, Susagna
The remarkable dual nature of faceted-charge patchy metal fluoride nanocrystals arises from the spontaneous selective coordination of anionic and cationic ligands on the different facets of the nanocrystals. In previous studies, the identification and origin of the charge at the patches were obtained by combining computer simulations with indirect experimental evidence. Taking a step further, we report herein the first direct real-space identification by Kelvin probe force microscopy of the predicted faceted-charge patchy behavior, allowing the image of the dual faceted-charge surfaces. High-resolution transmission electron microscopy reveals the detailed nanocrystal faceting and allows unambiguously inferring the hydrophilic or hydrophobic role of each facet from the identification of the surface atoms exposed at the respective crystallographic planes. The success of the study lies in a foresighted synthesis methodology designed to tune the nanocrystal size to be suitable for microscopy studies and demanding applications., This work was supported by the Spanish Government through the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S), the COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and PID2019-110907GB-I00. We also thank the support from the European Union for the ERC Advanced Grant (ULTRASUPERTAPE (ERC-2014-ADG-669504) and IMPACT (ERC-2019-PoC-874964) projects) funded by the European Research Council and from the Catalan Government through 2014-SGR753 and Xarmae., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of humidity on the writing speed and domain wall dynamics of ferroelectric domains

  • Spasojević, Irena
  • Verdaguer, Albert
  • Catalán, Gustau
  • Domingo, Neus
The data that support the findings of this study are available from the corresponding author upon reasonable request., The switching dynamics of ferroelectric polarization under electric fields depends on the availability of screening charges in order to stabilize the switched polarization. In ferroelectrics, thin films with exposed surfaces investigated by piezoresponse force microscopy (PFM), the main source of external screening charges is the atmosphere and the water neck, and therefore relative humidity (RH) plays a major role. Here, it is shown how the dynamic writing of domains in BaTiO3 thin films changes by varying scanning speeds in the range of RH between 2.5% and 60%. The measurements reveal that the critical speed for domain writing, which is defined as the highest speed at which electrical writing of a continuous stripe domain is possible, increases non-monotonically with RH. Additionally, the width of line domains shows a power law dependence on the writing speed, with a growth rate coefficient decreasing with RH. The size of the written domains at a constant speed as well as the creep-factor μ describing the domain wall kinetics follow the behavior of water adsorption represented by the adsorption isotherm, indicating that the screening mechanism dominating the switching dynamics is the thickness and the structure of adsorbed water structure and its associated dielectric constant and ionic mobility., The authors want to acknowledge technical support from I. Gaponenko on the installation of the low-noise humidity controller. Financial support was obtained under projects from the Spanish Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-108573GB-C21, PID2019-109931GB-I00, and PID2019-110907GB-I00. In addition, this work was partially funded by 2017-SGR-579 from the Generalitat de Catalunya. The ICN2 was funded by the CERCA programme / Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, Grant no. SEV-2017-0706). The ICMAB was supported by the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S). I.S. acknowledges support of the Secretaria d'Universitats i Recerca - Departament d'Empresa i Coneixement - Generalitat de Catalunya and the European Social Fund (ESF) (FI grant reference 2020 FI_B2 00157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local and correlated studies of humidity-mediated ferroelectric thin film surface charge dynamics

  • Gaponenko, Iaroslav
  • Musy, Loïc
  • Domingo, Neus
  • Stucki, Nicolas
  • Verdaguer, Albert
  • Bassiri-Gharb, Nazanin
  • Paruch, Patrycja
Electrochemical phenomena in ferroelectrics are of particular interest for catalysis and sensing applications, with recent studies highlighting the combined role of the ferroelectric polarisation, applied surface voltage and overall switching history. Here, we present a systematic Kelvin probe microscopy study of the effect of relative humidity and polarisation switching history on the surface charge dissipation in ferroelectric Pb(Zr0.2Ti0.8)O3 thin films. We analyse the interaction of surface charges with ferroelectric domains through the framework of physically constrained unsupervised machine learning matrix factorisation, Dictionary Learning, and reveal a complex interplay of voltage-mediated physical processes underlying the observed signal decays. Additional insight into the observed behaviours is given by a Fitzhugh–Nagumo reaction–diffusion model, highlighting the lateral spread and charge passivation process contributors within the Dictionary Learning analysis., The authors acknowledge Dr Sergei V. Kalinin of Oak Ridge National Laboratory, for helpful discussions about machine learning and the initial suggestion to explore reaction–diffusion modelling. This work was supported by Division II of the Swiss National Science Foundation under project 200021_178782. A.V. acknowledges support by the Spanish Government under the project PID2019-110907GB-I00 and the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S). N.D. acknowledges support by the Spanish Government under the project PID2019- 109931GB-I00. N.B.G. acknowledges support by the National Science Foundation under the project DMR-20269676. The authors would like to thank S. Muller for technical support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Freezing efficiency of feldspars is affected by their history of previous freeze-thaw events

  • Pach, Elzbieta
  • Verdaguer, Albert
Among the different aerosol mineral particles that contribute to induce ice nucleation (IN) in the troposphere, feldspars have been identified as the most active. Nevertheless, which surface properties make some feldspars more efficient than others, i.e. able to induce IN at higher temperatures, is still unclear. In addition to that, surface properties of such materials can change as they are exposed to a variety of environmental conditions while traveling through the troposphere. Here, freezing temperature of water droplets deposited on feldspar minerals has been measured as a function of consecutive freeze-thaw cycles. We found an increase of the freezing temperature for the initial cycles followed by approximately constant freezing temperature for consecutive cycles. We call this a "history effect". This effect is more evident for samples aged in standard room conditions and it disappears if the sample is exposed to oxygen plasma. Oxygen plasma generates OH groups at the surface, facilitating IN and cleans the surface from organic contamination, unblocking pores at the surface, believed to be the most active IN sites on feldspars. A similar process is suggested to happen during the history effect, when consecutive freeze-thaw events unblock IN sites., The authors thank C. Marcolli for discussion on results and their interpretation. This work has been supported by the Spanish Government under the project PID2019-110907GB-I00 and the ‘‘Severo Ochoa’’ Program for Centres of Excellence in R&D (CEX2019-000917-S). E. Pach acknowledges the Spanish Ministry of Science and Technology for the Juan de la Cierva Formation grant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical Doping of the Organic Semiconductor C8-BTBT-C8 Using an Aqueous Iodine Solution for Device Mobility Enhancement

  • Li, Jinghai
  • Babuji, Adara
  • Temiño, Inés
  • Salzillo, Tommaso
  • D'Amico, Francesco
  • Pfattner, Raphael
  • Ocal, Carmen
  • Barrena, Esther
  • Mas Torrent, Marta
The performance of organic field-effect transistors is still severely limited by factors such as contact resistance and charge trapping. Chemical doping is considered to be a promising key enabler for improving device performance, although there is a limited number of established doping protocols as well as a lack of understanding of the doping mechanisms. Here, a very simple doping methodology based on exposing an organic semiconductor thin film to an aqueous iodine solution is reported. The doped devices exhibit enhanced device mobility, which becomes channel-length independent, a decreased threshold voltage and a reduction in the density of interfacial traps. The device OFF current is not altered, which is in agreement with the spectroscopic data that points out that no charge transfer processes are occurring. Kelvin probe force microscopy characterization of the devices under operando conditions unambiguously proves that an important reduction of the contact resistance takes place after their exposition to the iodine solution, reaching almost ohmic contact., This work was funded by the Spanish Ministry with the project GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00, MAT2017-85089-C2-1-R (AEI/FEDER, UE) and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the Generalitat de Catalunya (2017-SGR-918). T. S. and F. D. acknowledge CERIC-ERIC for providing access to the Elettra IUVS-OFF beamline (beamtime number 20187028). J. L. acknowledges the Scholarship from the Chinese Council and J. L. and A. B. are enrolled in the UAB Materials Science PhD program. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Studying Ice with Environmental Scanning Electron Microscopy

  • Pach, Elzbieta
  • Verdaguer, Albert
Scanning electron microscopy (SEM) is a powerful imaging technique able to obtain astonishing images of the micro- and the nano-world. Unfortunately, the technique has been limited to vacuum conditions for many years. In the last decades, the ability to introduce water vapor into the SEM chamber and still collect the electrons by the detector, combined with the temperature control of the sample, has enabled the study of ice at nanoscale. Astounding images of hexagonal ice crystals suddenly became real. Since these first images were produced, several studies have been focusing their interest on using SEM to study ice nucleation, morphology, thaw, etc. In this paper, we want to review the different investigations devoted to this goal that have been conducted in recent years in the literature and the kind of information, beyond images, that was obtained. We focus our attention on studies trying to clarify the mechanisms of ice nucleation and those devoted to the study of ice dynamics. We also discuss these findings to elucidate the present and future of SEM applied to this field., A.V. acknowledges financial support by the Spanish Government under Project No. PID2019-110907GB-I00 and the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Charge-Transfer Complexes in Organic Field-Effect Transistors: Superior Suitability for Surface Doping

  • Babuji, Adara
  • Cazorla, Alba
  • Solano, Eduardo
  • Habenicht, Carsten
  • Kleemann, Hans
  • Ocal, Carmen
  • Leo, Karl
  • Barrena, Esther
We demonstrate the key role of charge-transfer complexes in surface doping as a successful methodology for improving channel field-effect mobility and reducing the threshold voltage in organic field-effect transistors (OFETs), as well as raising the film conductivity. Demonstrated here for 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) doped with 2,2'-(perfluoronaphthalene-2,6-diylidene)dimalononitrile (F6TCNNQ), channel doping by sequential deposition is consistently rationalized by the development of a cocrystalline structure that forms and evolves from the surface of the organic semiconductor film without trading the thin-film structure integrity. This scenario brings higher benefits for the device operation than doping by codeposition, where a decrease in the field-effect mobility of the device, even for a dopant content of only 1 mol %, makes codeposition less suitable. Insight into the structural and electronic properties of the interface satisfactorily explains the improved performance of OFETs upon the incorporation of the dopant and provides an understanding of the mechanism of doping in this system., This work was funded by the projects PID2019-110907GB-I00 and FUNFUTURE CEX2019-000917-S from MCIN/AEI/10.13039/501100011033. A.B. thanks the MCIN for the financial support through the BES-2016-077519 fellowship. This work has been carried out within the framework of the doctoral program of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). GIWAXS experiments were performed at the beamline BL11─NCD-SWEET at ALBA Synchrotron with the collaboration of ALBA staff. We would like to thank Stefanie Buchholtz for helping with the UPS measurements., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Temperature-induced polymorphism of a benzothiophene derivative: reversibility and impact on the thin film morphology

  • Yan, Shunya
  • Cazorla, Alba
  • Babuji, Adara
  • Solano, Eduardo
  • Ruzié, Christian
  • Geerts, Yves H.
  • Ocal, Carmen
  • Barrena, Esther
The identification of polymorphs in organic semiconductors allows for establishing structure-property relationships and gaining understanding of microscopic charge transport physics. Thin films of 2,7-bis(octyloxy)[1]benzothieno[3,2-b]-benzothiophene (C8O-BTBT-OC8) exhibit a substrate-induced phase (SIP) that differs from the bulk structure, with important implications for the electrical performance in organic field effect transistors (OFETs). Here we combine grazing incidence wide-angle X-ray scattering (GIWAXS) and atomic force microscopy (AFM) to study how temperature affects the morphology and structure of C8O-BTBT-OC8 films grown by physical vapor deposition on SiO2. We report a structural transition for C8O-BTBT-OC8 films, from the SIP encountered at room temperature (RT) to a high temperature phase (HTP) when the films are annealed at a temperature T ≥ 90 °C. In this HTP structure, the molecules are packed with a tilt angle (≈39° respect to the surface normal) and an enlarged in-plane unit cell. Although the structural transition is reversible on cooling at RT, AFM reveals that molecular layers at the SiO2 interface can remain with the HTP structure, buried under the film ordered in the SIP. For annealing temperatures close to 150 °C, dewetting occurs leading to a more complex morphological and structural scenario upon cooling, with coexistence of different molecular tilts. Because the molecular packing at the interface has direct impact in the charge carrier mobility of OFETs, identifying the different polymorphs of a material in the thin film form and determining their stability at the interfaces are key factors for device optimization., This work was funded by the projects PID2019-110907GB-I00 and FUNFUTURE CEX2019-000917-S from MCIN/AEI/10.13039/501100011033. S. Y. is financially supported by the China Scholarship Council (CSC) under Grant No. 202006990034. This work has been carried out within the framework of the doctoral program of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). GIWAXS experiments were performed at the beam line BL11 – NCD-SWEET at ALBA Synchrotron with the collaboration of ALBA staff. Y. H. G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT (No. 2.4565.11), Phasetrans (No. T.0058.14), Pi-Fast (No. T.0072.18), 2D to 3D (No. 30489208), and DIFFRA (No. U.G001.19). Financial support from the Fédération Wallonie-Bruxelles (ARC No. 20061) is also acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergistic Effect of Solvent Vapor Annealing and Chemical Doping for Achieving High-Performance Organic Field-Effect Transistors with Ideal Electrical Characteristics

  • Li, Jinghai
  • Babuji, Adara
  • Fijahi, Lamiaa
  • James, Ann Maria
  • Resel, Roland
  • Salzillo, Tommaso
  • Pfattner, Raphael
  • Ocal, Carmen
  • Barrena, Esther
  • Mas Torrent, Marta
Contact resistance and charge trapping are two key obstacles, often intertwined, that negatively impact on the performance of organic field-effect transistors (OFETs) by reducing the overall device mobility and provoking a nonideal behavior. Here, we expose organic semiconductor (OSC) thin films based on blends of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8) with polystyrene (PS) to (i) a CH3CN vapor annealing process, (ii) a doping I2/water procedure, and (iii) vapors of I2/CH3CN to simultaneously dope and anneal the films. After careful analysis of the OFET electrical characteristics and by performing local Kelvin probe force microscopy studies, we found that the vapor annealing process predominantly reduces interfacial shallow traps, while the chemical doping of the OSC film is responsible for the diminishment of deeper traps and promoting a significant reduction of the contact resistance. Remarkably, the devices treated with I2/CH3CN reveal ideal electrical characteristics with a low level of shallow/deep traps and a very high and almost gate-independent mobility. Hence, this work demonstrates the promising synergistic effects of performing simultaneously a solvent vapor annealing and doping procedure, which can lead to trap-free OSC films with negligible contact resistance problems., This work was funded by the projects GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00 and FUNFUTURE CEX2019-000917-S from MCIN/AEI/10.13039/501100011033/, by the Generalitat de Catalunya (2017-SGR-918) and by the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska–Curie grant agreement no. 811284 (UHMob). J.L. acknowledges funding from the Chinese Scholarship Council (CSC) and J.L., A.B., and L.F. are enrolled in the UAB Materials Science PhD program. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. The authors acknowledge Dr. Francesco D’Amico and the CERIC-ERIC Consortium for the access to experimental facilities and financial support (proposal number 20217080). T.S. thanks the European co-financing project FSE REACT EU-PON R&I 2014-2020. R.P. acknowledges support from the Ramón y Cajal Fellowship (ref RyC2019-028474-I)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the role of non-fullerene acceptor crystallinity in the charge transport properties and performance of organic solar cells

  • Mondelli, Pierluigi
  • Kaienburg, Pascal
  • Silvestri, Francesco
  • Scatena, Rebecca
  • Welton, Claire
  • Grandjean, Martine
  • Lemaur, Vincent
  • Solano, Eduardo
  • Nyman, Mathias
  • Horton, Peter N.
  • Coles, Simon J.
  • Barrena, Esther
  • Riede, Moritz
  • Radaelli, Paolo
  • Beljonne, David
  • Reddy, G. N.Manjunatha
  • Morse, Graham
The acceptor crystallinity has long been associated with favourable Organic Solar Cell (OSC) properties such as high mobility and fill factor. In particular, this applies to acceptor materials such as fullerene derivatives and the most recent Non-Fullerene Acceptors (NFAs), which are now surpassing a Power Conversion Efficiency (PCE) of 19%. Although these advantages are commonly attributed to their 3-dimensional crystal packing motif in the single crystal, the bridge that links the acceptor crystal packing from single crystals to solar cells has not clearly been shown yet. In this work, we investigate the molecular organisation of seven NFAs (o-IDTBR, IDIC, ITIC, m-ITIC, 4TIC, 4TICO, and m-4TICO), following the evolution of their packing motif in single-crystals, powder, and thin films made with pure NFAs and donor:NFA blends. We observed a good correlation between the NFA single crystal packing motif and their molecular arrangement in the bulk heterojunction. The NFA packing motif affects the material's propensity to form a highly crystalline domain in the blend. We specifically found that 3D reticular packing motifs show stronger ordering than 0D herringbone ones. However, the NFA packing motif is not directly correlating with device performance parameters. Although higher NFA crystallinity yields higher mobility, we found the domain purity to be more important for obtaining high efficiency organic solar cells by governing bimolecular recombination., P. Mondelli, F. Silvestri, E. Barrena and M. Riede acknowledge the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska Curie Grant agreement no. 722651 (SEPOMO) for the support in the realization of this work. P. Kaienburg acknowledges funding from the Global Challenges Research Fund (GCRF) through STFC, START project ST/R002754/1; and from EPSRC for a Postdoctoral Fellowship EP/V035770/1. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA synchrotron with the collaboration of ALBA staff (proposal 2019093873). M. Nyman acknowledges funding from the Academy of Finland through project #326000. M. Reddy acknowledges European Union's Horizon 2020 Research and Innovation Programme under the Skłodowska-Curie Grant (No. 79529). ss-NMR experiments were performed at the large-scale NMR facilities cofounded by IR INFRANALYTICS FR-2040. E. Barrena acknowledges funding by the Spanish Ministry under project PID2019-110907GB-I00 (AEI/FEDER, UE). P. Mondelli acknowledges support under the European Union’s Horizon 2020 research and innovation programme “GREENELIT”, Grant Agreement No. 951747., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dielectric behavior of curcuminoid polymorphs on different substrates by direct soft vacuum deposition

  • Riba López, Daniel
  • Zaffino, Rossella
  • Herrera, Daniel
  • Matheu, Roc
  • Silvestri, Francesco
  • Silva, Jesse Ferreira da
  • Sañudo, Eva Carolina
  • Mas Torrent, Marta
  • Barrena, Esther
  • Pfattner, Raphael
  • Ruiz, Eliseo
  • González Campo, Arántzazu
  • Aliaga Alcalde, Nuria
Our work examines the structural-electronic correlation of a new curcuminoid, AlkCCMoid, as a dielectric material on different substrates. For this purpose, we show a homemade sublimation method that allows the direct deposition of molecules on any type of matrix. The electronic properties of AlkCCMoid have been evaluated by measurements on single crystals, microcrystalline powder, and sublimated samples, respectively. GIWAXS studies on surfaces and XRD studies on powder have revealed the existence of polymorphs and the effect that substrates have on curcuminoid organization. We describe the dielectric nature of our system and identify how different polymorphs can affect electronic parameters such as permittivity, all corroborated by DFT calculations., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D program (ERC-724981). This work was also supported by the projects PID2019-108794GB-I00, GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00, and PID2021-122464NB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. E.C.S. acknowledges the financial support from the Spanish Government, (Grant PGC2018-098630-B-I00). R.P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019-028474-I). J.dS. thanks to the MChem program of the University of Southampton. E.R. thanks Generalitat de Catalunya by a ICREA Academia award, Spanish Ministry Science for a Maria de Maeztu excellence grant (MDM-2017-0767), and computer resources, technical expertise and assistance provided by the Barcelona Supercomputing Center. R.M. thanks “la Caixa” Foundation (ID 100010434) for a Junior Leader fellowship (LCF/BQ/PI22/11910024). The crystal structures were collected at beamline XALOC at ALBA Synchrotron (Exp. 2017042211). The CSIC authors acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE,2020-2023). GIWAXS experiments were performed at the beam line BL11 – NCD-SWEET at ALBA Synchrotron with the collaboration of ALBA staff ; we also thank the support from Alba Cazorla., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Real-space image of charged patches in tunable-size nanocrystals

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Barrena, Esther|||0000-0001-9163-2959
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Ricart, Susagna
The remarkable dual nature of faceted-charge patchy metal fluoride nanocrystals arises from the spontaneous selective coordination of anionic and cationic ligands on the different facets of the nanocrystals. In previous studies, the identification and origin of the charge at the patches were obtained by combining computer simulations with indirect experimental evidence. Taking a step further, we report herein the first direct real-space identification by Kelvin probe force microscopy of the predicted faceted-charge patchy behavior, allowing the image of the dual faceted-charge surfaces. High-resolution transmission electron microscopy reveals the detailed nanocrystal faceting and allows unambiguously inferring the hydrophilic or hydrophobic role of each facet from the identification of the surface atoms exposed at the respective crystallographic planes. The success of the study lies in a foresighted synthesis methodology designed to tune the nanocrystal size to be suitable for microscopy studies and demanding applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of humidity on the writing speed and domain wall dynamics of ferroelectric domains

  • Spasojevic, Irena|||0000-0002-6426-7009
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Catalan, Gustau|||0000-0003-0214-4828
  • Domingo Marimon, Neus|||0000-0002-5229-6638
The switching dynamics of ferroelectric polarization under electric fields depends on the availability of screening charges in order to stabilize the switched polarization. In ferroelectrics, thin films with exposed surfaces investigated by piezoresponse force microscopy (PFM), the main source of external screening charges is the atmosphere and the water neck, and therefore relative humidity (RH) plays a major role. Here, it is shown how the dynamic writing of domains in BaTiO thin films changes by varying scanning speeds in the range of RH between 2.5% and 60%. The measurements reveal that the critical speed for domain writing, which is defined as the highest speed at which electrical writing of a continuous stripe domain is possible, increases non-monotonically with RH. Additionally, the width of line domains shows a power law dependence on the writing speed, with a growth rate coefficient decreasing with RH. The size of the written domains at a constant speed as well as the creep-factor μ describing the domain wall kinetics follow the behavior of water adsorption represented by the adsorption isotherm, indicating that the screening mechanism dominating the switching dynamics is the thickness and the structure of adsorbed water structure and its associated dielectric constant and ionic mobility.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Local and correlated studies of humidity-mediated ferroelectric thin film surface charge dynamics

  • Gaponenko, Iaroslav|||0000-0002-9694-7033
  • Musy, Loïc|||0000-0002-7741-6763
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Stucki, Nicolas
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Bassiri-Gharb, Nazarin
  • Paruch, Patrycja
Electrochemical phenomena in ferroelectrics are of particular interest for catalysis and sensing applications, with recent studies highlighting the combined role of the ferroelectric polarisation, applied surface voltage and overall switching history. Here, we present a systematic Kelvin probe microscopy study of the effect of relative humidity and polarisation switching history on the surface charge dissipation in ferroelectric Pb(ZrTi)O thin films. We analyse the interaction of surface charges with ferroelectric domains through the framework of physically constrained unsupervised machine learning matrix factorisation, Dictionary Learning, and reveal a complex interplay of voltage-mediated physical processes underlying the observed signal decays. Additional insight into the observed behaviours is given by a Fitzhugh-Nagumo reaction-diffusion model, highlighting the lateral spread and charge passivation process contributors within the Dictionary Learning analysis.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Oxidation processes at the surface of BaTiO3 thin films under environmental conditions

  • Spasojevic, Irena|||0000-0002-6426-7009
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Domingo Marimon, Neus|||0000-0002-5229-6638
Dissociation and adsorption of water on ferroelectric oxide surfaces play important role in the processes of screening and switching dynamics of ferroelectric polarization, as well as in catalytic processes which can be additionally coupled with light, temperature or vibration stimuli. In this work, we present XPS study of ferroelectric BaTiOthin films and determine the entanglement between surface chemistry, polarization direction and stability, by observing changes upon time exposure to environmental conditions, heating in Oatmosphere and irradiation in vacuum. We devote special attention to Ba 3d spectral region and identify two different oxidation states of O atoms in the compounds of Ba. While this second specie was generally attributed to Ba in surface compounds where it has different oxygen coordination than in the bulk, based on the XPS results of oxygen annealed thin films, we demonstrate that this so far neglected component, corresponds to barium peroxide (BaO) and identify it as important active specie for the study of screening mechanisms closely related with catalytic activity present in this ferroelectric material. Finally, we report on chemically assisted polarization switching in thin films induced by heating in vacuum or exposure to X-Ray radiation due to the formation of positive surface electric field created by oxygen or electron vacancies, respectively.