Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 71
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Resonant Inner-Shell Photofragmentation of Adamantane (C10H16)

  • Ganguly, Smita
  • Gisselbrecht, Mathieu
  • Eng-Johnsson, Per
  • Feifel, Raimund
  • Díaz-Tendero Victoria, Sergio
  • Muchová, Eva
  • Milosavljević, Aleksandar R.
  • Rousseau, Patrick
  • Maclot, Sylvain
Adamantane, the smallest diamondoid molecule with a symmetrical cage, contains two distinct carbon sites, CH and CH (Formula presented.). The ionization/excitation of the molecule leads to the cage opening and strong structural reorganization. While theoretical predictions suggest that the carbon site CH primarily causes the cage opening, the role of the other CH (Formula presented.) site remains unclear. In this study, we used advanced experimental Auger electron–ion coincidence techniques and theoretical calculations to investigate the fragmentation dynamics of adamantane after resonant inner-shell photoexcitation. Our results demonstrate that some fragmentation channels exhibit site-sensitivity of the initial core–hole location, indicating that different carbon site excitations could lead to unique cage opening mechanisms, The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 and the COST Action CA18212—Molecular Dynamics in the GAS phase (MD-GAS), supported by COST (European Cooperation in Science and Technology). We also acknowledge the support of the Helmholtz Foundation through the Helmholtz-Lund International Graduate School (HELIOS, HIRS-0018) and the Swedish Research Council (VR2020-0520). R.F. thanks the Swedish Research Council and the Knut and Alice Wallenberg Foundation for financial support. This work was partially supported by MICINN (Spanish Ministry of Science and Innovation) project PID2019-110091GB-I00 funded by MCIN/AEI/10.13039/501100011033, and the “María de Maeztu” (CEX2018-000805-M) Program for Centers of Excellence in RD and Czech Science Foundation, project no. 21-26601X (EXPRO)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

A Cl− hinge for cyclen macrocycles: Ionic Interactions and tweezer-like complexes

  • Avilés Moreno, Juan Ramón
  • Berden, Giel
  • Oomens, Jos
  • Martínez-Haya, Bruno
The supramolecular networks derived from the complexation of polyazamacrocycles with halide anions constitute fundamental building blocks of a broad range of modern materials. This study provides insights into the conformational framework that supports the binding of protonated cyclen macrocyles (1,4,7,10-Tetraazacyclododecane) by chloride anions through NH δ+ ···Cl - interactions. The isolated complex comprised of two cyclen hosts linked by one Cl - anion is characterized by means of infrared action spectroscopy and ion mobility mass spectrometry, in combination with quantum chemical computations. The Cl - anion is found to act as a hinge that bridges the protonated NH2+ moieties of the two macrocycles leading to a molecular tweezer configuration. Different types of conformations emerge, depending on whether the trimer adopts an open arrangement, with significant freedom for internal rotation of the cyclen moieties, or it locks in a folded conformation with intermolecular H-bonds between the two cyclen backbones. The ion mobility collision cross section supports that folded configurations of the complex are dominant under isolated conditions in the gas phase. The IRMPD spectroscopy experiments suggest that two qualitatively different families of folded conformations coexist at room temperature, featuring either peripheral or inner positions of the anion with respect to the macrocycle cavities, These findings should have implications in the growth of extended networks in the nanoscale and in sensing applications, The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. This study is part of project P12-FQM-4938 of the research programme of Junta de Andalucia and FEDER.
Docta Complutense
Publication Artículo científico (JournalArticle)

Imaging phase segregation in nanoscale LixCoO2 single particles

  • Fuller, Elliot J
  • Ashby, David S
  • Polop, Celia
  • Salagre, Elena
  • Bhargava, Bhuvsmita
  • Song, Yueming
  • Vasco, Enrique
  • Sugar, Joshua D
  • Albertus, Paul
  • Mentes, Tevfik Onur
  • Locatelli, Andrea
  • Segovia, Pilar
  • González Barrio, Miguel Ángel
  • Mascaraque Susunaga, Arantzazu
  • Michel, Enrique G
  • Talin, A. Alec
Li xCoO2 (LCO) is a common battery cathode material that has recently emerged as a promising material for other applications including electrocatalysis(1, 2) and as electrochemical random access memory (ECRAM)(3). During charge-discharge cycling LCO exhibits pase transformations that are significantly complicated by electron correlation. While the bulk pase diagram for an ensemble of battery particles has been studied extensively, it remains unclear how these phases scale to nanometer dimensions and the effects of strain and diffusional anisotropy at the single particle scale. Understanding these effects is critical to modeling battery performance and for predicting the scalability and performance of electrocatalysts and ECRAM. Here we investigate isolated, epitaxial LiCoO2 islands grown by pulsed laser deposition (PLD). After electrochemical cycling of the islands, conductive atomic force microscopy (c-AFM) is used to image the spatial distribution of conductive and insulating phases. Above 20 nm island thicknesses, we observe a kinetically arrested state in which the phase boundary is perpendicular to the Li-planes; we propose a model and present image analysis results that show smaller LCO islands have a higher conductive fraction than larger area islands, and the overall conductive fraction is consistent with lithiation state. Thinner islands (14 nm), with a larger surface to volume ratio, are found to exhibit a striping pattern which suggests surface energy can dominate below a critical dimension. When increasing force is applied through the AFM tip to strain the LCO islands, significant shifts in current flow are observed, and underlying mechanisms for this behavior are discussed. The c-AFM images are compared with photoemission electron microscopy (PEEM) images which are used to acquire statistics across hundreds of particles. The results indicate that strain and morphology become more critical to electrochemical performance as particles approach nanometer dimensions.
Docta Complutense
Publication Artículo científico (JournalArticle)

Size-dependence and high temperature stability of radial vortex magnetic textures imprinted by superconductor stray fields

  • Sánchez Manzano, David
  • Orfila Rodríguez, Gloria
  • Sander, Anke
  • Marcano, Lourdes
  • Gallego Toledo, Fernando
  • Mawass, Mohamad-Assaad
  • Grilli, Francesco
  • Arora, Ashima
  • Peralta, Andrea
  • Cuéllar Jiménez, Fabian Andrés
  • Fernández Roldán, Jose A.
  • Reyren, NIcolas
  • Kronast, Florian
  • León Yebra, Carlos
  • Rivera Calzada, Alberto Carlos
  • Villegas, Javier E
  • Santamaría Sánchez-Barriga, Jacobo
  • Valencia, Sergio
Swirling spin textures, including topologically nontrivial states, such as skyrmions, chiral domain walls, and magnetic vortices, have garnered significant attention within the scientific community due to their appeal from both fundamental and applied points of view. However, their creation, controlled manipulation, and stability are typically constrained to certain systems with specific crystallographic symmetries, bulk or interface interactions, and/or a precise stacking sequence of materials. Recently, a new approach has shown potential for the imprint of magnetic radial vortices in soft ferromagnetic compounds making use of the stray field of YBa2Cu3O7-delta superconducting microstructures in ferromagnet/superconductor (FM/SC) hybrids at temperatures below the superconducting transition temperature (T-C). Here, we explore the lower size limit for the imprint of magnetic radial vortices in square and disc shaped structures as well as the persistence of these spin textures above T-C, with magnetic domains retaining partial memory. Structures with circular geometry and with FM patterned to smaller radius than the superconductor island facilitate the imprinting of magnetic radial vortices and improve their stability above T-C, in contrast to square structures where the presence of magnetic domains increases the dipolar energy. Micromagnetic modeling coupled with a SC field model reveals that the stabilization mechanism above T-C is mediated by microstructural defects. Superconducting control of swirling spin textures, and their stabilization above the superconducting transition temperature by means of defect engineering holds promising prospects for shaping superconducting spintronics based on magnetic textures
Docta Complutense
Publication Artículo científico (JournalArticle)

Long-range superconducting proximity effect in YBa2Cu3O7/La0.7Ca0.3MnO3 weak-link arrays

  • Sánchez Manzano, David
  • Mesoraca, S.
  • Rodríguez Corvillo, Sara
  • Lagarrigue, A.
  • Gallego Toledo, Fernando
  • Cuéllar Jiménez, Fabian Andrés
  • Sander, A.
  • Rivera Calzada, Alberto Carlos
  • Valencia, S.
  • Villegas, J.E.
  • León Yebra, Carlos
The interplay between ferromagnetism and superconductivity has attracted substantial interest due to its potential for exotic quantum phenomena and advanced electronic devices. Although ferromagnetism and superconductivity are antagonistic phenomena, ferromagnets (F) can host spin-triplet superconductivity induced via proximity with superconductors (S). To date, most of the experimental effort has been focused on single S/F/S junctions. Here, we have found the fingerprints of long-range superconducting proximity effect in micrometric weaklink arrays, formed by embedding YBa2Cu3O7 superconducting islands in a half-metallic ferromagnet La0.7Ca0.3MnO3 film. These arrays show magnetoresistance oscillations that appear at temperatures below the critical temperature of YBa2Cu3O7 for currents below a threshold, indicating their superconducting origin. This realization paves the way for device architectures displaying macroscopic quantum interference effects, which are of interest for field sensing applications, among others.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecular Layer Deposition of Zeolitic Imidazolate Framework-8 Films

  • Smets, Jorid|||0000-0003-4719-7368
  • Cruz, Alexander John|||0000-0002-5123-1162
  • Rubio-Giménez, Víctor|||0000-0003-1269-5885
  • Tietze, Max L.|||0000-0002-9018-3829
  • Kravchenko, Dmitry E.|||0000-0001-6404-2486
  • Arnauts, Giel|||0000-0002-3872-2530
  • Matavž, Aleksander|||0000-0002-3385-3566
  • Wauteraerts, Nathalie|||0000-0003-1344-7429
  • Tu, Min|||0000-0003-4751-3877
  • Marcoen, Kristof|||0000-0003-2831-483X
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Korytov, Maxim|||0000-0001-7569-5028
  • Vereecken, Philippe M.|||0000-0003-4115-0075
  • De Feyter, Steven|||0000-0002-0909-9292
  • Hauffman, Tom|||0000-0002-3456-0271
  • Ameloot, Rob|||0000-0003-3178-5480
Vapor-phase film deposition of metal-organic frameworks (MOFs) would facilitate the integration of these materials into electronic devices. We studied the vapor-phase layer-by-layer deposition of zeolitic imidazolate framework 8 (ZIF-8) by consecutive, self-saturating reactions of diethyl zinc, water, and 2-methylimidazole on a substrate. Two approaches were compared: (1) Direct ZIF-8 "molecular layer deposition" (MLD), which enables a nanometer-resolution thickness control and employs only self-saturating reactions, resulting in smooth films that are crystalline as-deposited, and (2) two-step ZIF-8 MLD, in which crystallization occurs during a postdeposition treatment with additional linker vapor. The latter approach resulted in a reduced deposition time and an improved MOF quality, i.e., increased crystallinity and probe molecule uptake, although the smoothness and thickness control were partially lost. Both approaches were developed in a modified atomic layer deposition reactor to ensure cleanroom compatibility.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancement of selective adsorption of Cr species via modification of pine biomass

  • Zhao, Jingjing
  • Boada, Roberto|||0000-0003-4857-8402
  • Cibin, Giannantonio|||0000-0001-5761-6760
  • Palet, Cristina|||0000-0002-7467-613X
Pine biomass (Pine), pine gasification biochar (PG) and pine biomass loaded with TiO2 (Pine/TiO2) were used as sorbent materials to remove Cr(III) or Cr(VI) ions from aqueous solutions. Our results showed that Pine/TiO2 had an improved adsorption capacity respect to Pine being the adsorption capacity for Cr(VI), 12.8 mg/g, much larger than for Cr(III), 1.23 mg/g. On the other hand, PG showed much higher adsorption for Cr(III), 12.4 mg/g, than Pine/TiO2, and negligible adsorption for Cr(VI). To understand this species-dependent adsorption behavior, the adsorption mechanisms, sorbents morphology and functional sites were characterized using a multi-technique approach. The chemical state and local coordination structure of the adsorbed Cr species was studied by X-ray absorption spectroscopy (XAS). Our results show that the adsorption of Cr(III) occurred mainly through cation exchange with mineral elements in PG biochar, whereas the Cr(III) adsorption by functional groups (carboxyl and hydroxyl groups) dominate in the biomass sorbent. The enhancement of Cr(VI) adsorption in Pine/TiO2 can be explained by the presence of TiOH2+groups present in the surface of the TiO2 microparticles. X-ray absorption spectroscopy (XAS) results reveal that Cr(VI) reduces to Cr(III) after being adsorbed by the sorbent materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Powering Innovation Through Subsidised Tailored SME Access to European Research Infrastructures

  • Admans, Gary
  • Boix de la Cruz, Virginia
  • Mitchell, Edward
  • Sanchez, Alejandro
  • Valls Vidal, Núria
Small and medium-sized enterprises (SMEs) are repeatedly identified in European research and innovation policy as key drivers of economic growth and technological uptake, yet they remain structurally under-represented amongst users of European research infrastructures (RIs). Over the past decade, several European Commission–funded projects have experimented with subsidised, SME-oriented access mechanisms intended to reduce financial, organisational, and cognitive barriers to RI use. Drawing on evidence from initiatives centred on X-ray light source and free electron laser and infrastructures LEAPS (1) notably the TamaTA (Tailor-made for SME Transnational Access) (2) schemes under CALIPSOplus (3) (4) and LEAPS-INNOV (5) (6) and from a broader analytical research infrastructure network ReMade-at-ARI (7) (8), this paper reflects on how these schemes were designed, what they delivered and the lessons they offer for future science and innovation policy. The evidence suggests that subsidised access can be an effective policy instrument, but only when combined with appropriate and pragmatic delivery mechanisms designed for industry. Single entry points, rapid and rolling evaluation procedures, confidentiality-ready access conditions and hands-on support emerge as critical success factors. Where these elements are present, SMEs complete access, report innovation-relevant outcomes and, in some cases, progress towards repeat use of RIs. The paper concludes with recommendations aimed at consolidating subsidised SME access as a durable European-level capability rather than a series of project-based pilots.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation

  • Salcedo-Abraira, Pablo
  • Babaryk, Artem A.
  • Montero-Lanzuela, Eva
  • Contreras Almengor, Oscar R.
  • Cabrero-Antonino, Maria
  • Svensson, Erik
  • Willhammar, Tom
  • Elkäim, Erik
  • Horcajada, Patricia
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A new porous titanium(IV) squarate metal¿organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H2 amounts for MOF-based materials under simulated sunlight (up to 672 µmol gcatalyst in 22 h) without any activity loss during at least 10 d., P.S.-A. and A.A.B. contributed equally to this work. The authors acknowledge the Ramón Areces Foundation project H+MOFs, the M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/ PRTR) project, and Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033) project. S.N. thanks financial support by Ministerio de Ciencia, Innovatión y Universidades RTI2018-099482-A-I00 project and Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project. H.G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). T.W. acknowledges financial support from the Swedish Research Council (VR, 2019-05465). Parts of this research were carried out at ¿CRISTAL¿ at SOLEIL. P.S. and A.A.B. sincerely thank to the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 for the support of the synchrotron experiment.
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Infrared spectra and structures of C60Rhn+ complexes

  • Germán, Estefanía
  • Hou, Gao-Lei
  • Vanbuel, Jan
  • Bakker, Joost M.
  • Alonso Martín, Julio Alfonso
  • Janssens, Ewald
  • López Santodomingo, María José
Producción Científica, Metal clusters supported on carbonaceous substrates are of interest in catalysis, hydrogen storage, and other fields. In this paper, the structures and the infrared spectra of C60Rhn+ (n = 1–6) fullerene-metal complexes are studied by a combination of mass-selective infrared spectroscopy and theoretical calculations. It is found that clustering of Rh on the surface of the fullerene is preferred over surface wetting. For Rh4+ and Rh6+, the structures of the adsorbed clusters are different from those of the free clusters. There is electron transfer from the metal cluster to the fullerene in neutral C60Rhn, and in cationic C60Rhn+ the electron deficit is shared by the metal cluster and the fullerene. Adsorption of Rhn clusters leads to degeneracy lifting of the most intense C60 features in the infrared spectra that were measured in the 300–850 cm−1 range. Agreement is obtained, in general, between the experimental infrared spectra of D2-tagged C60Rhn+ and the calculated spectra for untagged C60Rhn+, except in the 600–750 cm−1 region, where features mainly arise from the presence of D2-messenger molecules adsorbed on the Rhn clusters., Junta de Castilla y Leon (grant VA021G18), Ministerio de Ciencia, Innovación y Universidades (grant PID2019-104924RB-I00), KU Leuven Research Council (grant C14/18/073), Barcelona Supercomputing Center (grants FI-2019-3-0029 and FI-2020-1-0032)
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Tuning the carrier injection barrier of hybrid metal–organic interfaces on rare earth-gold surface compounds

  • Castrillo Bodero, Rodrigo
  • Blanco Rey, María
  • Ali, Khadiza
  • Ortega Conejero, José Enrique
  • Schiller, Frederik
  • Fernández, Laura
Magnetic hybrid metal–organic interfaces possess a great potential in areas such as organic spintronics and quantum information processing. However, tuning their carrier injection barriers on-demand is fundamental for the implementation in technological devices. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 surfaces (RE = Gd, Ho and Yb) and studied their growth, electrostatics and electronic structure. CuPc exhibits a long-range commensurability and a vacuum level pinning of the molecular energy levels. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2)., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Tuning the Magnetic Response of Magnetospirillum magneticum by Changing the Culture Medium: A Straightforward Approach to Improve Their Hyperthermia Efficiency

  • Gandia Aguado, David
  • Marcano Prieto, Lourdes
  • Gandarias Albaina, Lucia
  • Villanueva, Danny
  • Orue Goikuria, Iñaki
  • Abrudan, Radu Marius
  • Valencia, Sergio
  • Rodrigo Arrizabalaga, Irati
  • García Martínez, José Ángel
  • Muela Blázquez, Alicia
  • Fernández Gubieda Ruiz, María Luisa
  • Alonso, Javier
Magnetotactic bacteria Magnetospirillum magneticum AMB-1 have been cultured using three different media: magnetic spirillum growth medium with Wolfe’s mineral solution (MSGM + W), magnetic spirillum growth medium without Wolfe’s mineral solution (MSGM – W), and flask standard medium (FSM). The influence of the culture medium on the structural, morphological, and magnetic characteristics of the magnetosome chains biosynthesized by these bacteria has been investigated by using transmission electron microscopy, X-ray absorption spectroscopy, and X-ray magnetic circular dichroism. All bacteria exhibit similar average size for magnetosomes, 40–45 nm, but FSM bacteria present slightly longer subchains. In MSGM + W bacteria, Co2+ ions present in the medium substitute Fe2+ ions in octahedral positions with a total Co doping around 4–5%. In addition, the magnetic response of these bacteria has been thoroughly studied as functions of both the temperature and the applied magnetic field. While MSGM – W and FSM bacteria exhibit similar magnetic behavior, in the case of MSGM + W, the incorporation of the Co ions affects the magnetic response, in particular suppressing the Verwey (∼105 K) and low temperature (∼40 K) transitions and increasing the coercivity and remanence. Moreover, simulations based on a Stoner–Wolhfarth model have allowed us to reproduce the experimentally obtained magnetization versus magnetic field loops, revealing clear changes in different anisotropy contributions for these bacteria depending on the employed culture medium. Finally, we have related how these magnetic changes affect their heating efficiency by using AC magnetometric measurements. The obtained AC hysteresis loops, measured with an AC magnetic field amplitude of up to 90 mT and a frequency, f, of 149 kHz, reveal the influence of the culture medium on the heating properties of these bacteria: below 35 mT, MSGM – W bacteria are the best heating mediators, but above 60 mT, FSM and MSGM + W bacteria give the best heating results, reaching a maximum heating efficiency or specific absorption rate (SAR) of SAR/f ≈ 12 W g–1 kHz–1., This work was supported by the Spanish MICINN/AEI/10.13039/501100011033 under Projects MAT2017-83631-C3-R and PID2020-115704RB-C3, the Basque Government under projects IT-1479-22 and IT-1500-22, and the BBVA Foundation under the Leonardo Fellowships for Researchers and Cultural Creators 2022. We thank the Helmholtz-Zentrum Berlin für Materialien und Energie for the allocation of synchrotron radiation beamtime and the support of the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. We thank the “Nanotechnology in translational hyperthermia” Network (RED2018-102626-T) funded by MCIN/AEI/10.13039/501100011033. Finally, we also thank A. Tato for her help in TEM and hysteresis loops measurements, R. Andrade and J.C. Raposo for technical and human support provided by SGIker (UPV/EHU/FEDER, EU), and A. García Prieto for her helpful comments and continuous support.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Possible experimental realization of a basicZ2topological semimetal in GaGeTe

  • Haubold, Erik
  • Fedorov, Alexander
  • Pielnhofer, Florian
  • Rusinov, Igor P.
  • Menshchikova, Tatiana V.
  • Duppel, Viola
  • Friedrich, Daniel
  • Weihrich, Richard
  • Pfitzner, Arno
  • Zeugner, Alexander
  • Isaeva, Anna
  • Thirupathaiah, Setti
  • Kushnirenko, Yevhen
  • Rienks, Emile
  • Kim, Timur
  • Chulkov, Evgueni V.
  • Büchner, Bernd
  • Borisenko, Sergey
We report experimental and theoretical evidence that GaGeTe is a basic Z(2) topological semimetal with three types of charge carriers: bulk-originated electrons and holes as well as surface state electrons. This electronic situation is qualitatively similar to the classic 3D topological insulator Bi2Se3, but important differences account for an unprecedented transport scenario in GaGeTe. High-resolution angle-resolved photoemission spectroscopy combined with advanced band structure calculations show a small indirect energy gap caused by a peculiar band inversion at the T-point of the Brillouin zone in GaGeTe. An energy overlap of the valence and conduction bands brings both electron and holelike carriers to the Fermi level, while the momentum gap between the corresponding dispersions remains finite. We argue that peculiarities of the electronic spectrum of GaGeTe have a fundamental importance for the physics of topological matter and may boost the material's application potential., This work was supported by DFG under the Grant No. BO 1912/7-1 as well as Grant Nos. IS 250/2-1 and PF 324/4-1 of the SPP 1666 program, Grant No. RU 776/15-1 of the ERANET-Chemistry program, Tomsk State University Project No. 8.1.01.2018, and St. Petersburg University Project No. 15.61.202.2015. Calculations were performed at the SKIF-Cyberia supercomputer of Tomsk State University and supported by RSF, grant No. 18-12-00169. The authors acknowledge Diamond Light Source for the beamtime at I05 beamline under Proposal No. SI18586 as well as the BESSY II Berlin for the beamtime at 13 ARPES station under Proposal Nos. 171-05051CR and 172-05659CR/R. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement No. 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. S.B. is grateful to BMWi Germany for the support within the framework of WIPANO program (Grant No. N 03THW12H04). S.B. is also grateful to BMBF Germany for the support within the framework of Ukrainian-German Excellence Center UKRATOP project.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Reduced Carbon Monoxide Saturation Coverage on Vicinal Palladium Surfaces: the Importance of the Adsorption Site

  • García Martínez, Fernando
  • Dietze, Elisabeth
  • Schiller, Frederik
  • Gajdek, Dorotea
  • Merte, Lindsay R.
  • Gericke, Sabrina M.
  • Zetterberg, Johan
  • Albertin, Stefano
  • Lundgren, Edvin
  • Gronbeck, Henrik
  • Ortega Conejero, José Enrique
[EN]Steps at metal surfaces may influence energetics and kinetics of catalytic reactions in unexpected ways. Here, we report a significant reduction of the CO saturation coverage in Pd vicinal surfaces, which in turn is relevant for the light-off of the CO oxidation reaction. The study is based on a systematic investigation of CO adsorption on vicinal Pd(111) surfaces making use of a curved Pd crystal. A combined X-ray Photoelectron Spectroscopy and DFT analysis allows us to demonstrate that an entire row of atomic sites under Pd steps remains free of CO upon saturation at 300 K, leading to a step-densitydependent reduction of CO coverage that correlates with the observed decrease of the light-off temperature during CO oxidation in vicinal Pd surfaces., We acknowledge financial support from the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P, PID2019-107338RB-C63, PID2020-116093RB-C44), the Basque Government (Grants IT-1255-19), the Knut and Alice Wallenberg foundation (DNR KAW 2015.0058 "Atomistic Design of new Catalysts"), and the Swedish Research Council (DNR 349-2011-6491 "Catalysis on the Atomic Scale"). Financial support is acknowledged from the Swedish Research Council (2016-5234). The DFT calculations were performed at C3SE (Goteborg) via a SNIC grant. We acknowledge MAX IV Laboratory support, in particular Alexei Preobrajenski, for their help in synchrotron experiments, which were carried out at the FlexPES beamline under Proposal 20190717. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496. Moreover, the research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Magnetic Anisotropy of Individual Nanomagnets Embedded in Biological Systems Determined by Axi-asymmetric X‑ray Transmission Microscopy

  • Marcano Prieto, Lourdes
  • Orue Goikuria, Iñaki
  • Gandia Aguado, David
  • Gandarias Albaina, Lucia
  • Weigand, Markus
  • Abrudan, Radu Marius
  • García Prieto, Ana
  • García Arribas, Alfredo
  • Muela Blázquez, Alicia
  • Fernández Gubieda Ruiz, María Luisa
  • Valencia, Sergio
Over the past few years, the use of nanomagnets in biomedical applications has increased. Among others, magnetic nanostructures can be used as diagnostic and therapeutic agents in cardiovascular diseases, to locally destroy cancer cells, to deliver drugs at specific positions, and to guide (and track) stem cells to damaged body locations in regenerative medicine and tissue engineering. All these applications rely on the magnetic properties of the nanomagnets which are mostly determined by their magnetic anisotropy. Despite its importance, the magnetic anisotropy of the individual magnetic nanostructures is unknown. Currently available magnetic sensitive microscopic methods are either limited in spatial resolution or in magnetic field strength or, more relevant, do not allow one to measure magnetic signals of nanomagnets embedded in biological systems. Hence, the use of nanomagnets in biomedical applications must rely on mean values obtained after averaging samples containing thousands of dissimilar entities. Here we present a hybrid experimental/theoretical method capable of working out the magnetic anisotropy constant and the magnetic easy axis of individual magnetic nanostructures embedded in biological systems. The method combines scanning transmission X-ray microscopy using an axi-asymmetric magnetic field with theoretical simulations based on the Stoner−Wohlfarth model. The validity of the method is demonstrated by determining the magnetic anisotropy constant and magnetic easy axis direction of 15 intracellular magnetite nanoparticles (50 nm in size) biosynthesized inside a magnetotactic bacterium., L.M. acknowledges the financial support provided through a postdoctoral fellowship from the Basque Government (POS-2019-2-0017). Funding from the Spanish Government (grant PID2020-115704RB-C31 funded by MCIN/AEI/10.13039/501100011033) and from the Basque Government (projects IT-1245-19 and KK-2021/00040) is acknowledged. We acknowledge the technical and human support provided by SGIker (UPV/EHU). We thank the HZB for the allocation of synchrotron radiation beamtime and funding under the project CALIPSOplus (Grant Agreement 730872) from the EU Framework Programme for Research and Innovation HORIZON2020.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

CO and O2 interaction with kinked Pt surfaces

  • García Martínez, Fernando
  • Turco, Elia
  • Schiller, Frederik
  • Ortega Conejero, José Enrique
We investigate the chemical interaction of carbon monoxide (CO) and oxygen (O2) with kink atoms on steps of platinum crystal surfaces using a specially designed Pt curved sample. We aim at describing the fundamental stages of the CO oxidation reaction, i.e., CO-covered/poisoned stage and O-covered/active stage, at the poorly known kinked Pt facets by probing CO uptake/saturation and O2 saturation, respectively. Based on the systematic analysis that the curved surface allows, and using high-resolution X-ray photoemission, a diversity of terrace and step/kink species are straightforwardly identified and accurately quantified, defining a smooth structural and chemical variation across different crystal planes. In the CO-saturated case, we observe a preferential adsorption at step edges, where the CO coverage reaches a CO molecule per step Pt atom, significantly higher than their close-packed analogous steps with straight terrace termination. For the O-saturated surface, a significantly higher O coverage is observed in kinked planes compared to the Pt(111) surface. While the strong adsorption of CO at the kinked edges points toward a higher ignition temperature of the CO oxidation at kinks as compared to terraces, the large O coverage at steps may lead to an increased reactivity of kinked surfaces during the active stage of the CO oxidation., We acknowledge financial support from grants PID2020-116093RB-C44 and PID2019-107338RB-C6-3, funded by the Spanish MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, the Basque Government (Grant IT-1591-22), and the Diputación Foral de Gipuzkoa (Gipuzkoa Next program). We acknowledge Elettra Sincrotrone Trieste for providing access to its synchrotron radiation facilities, and we thank E. Tosi and P. Lacovig for assistance in using beamline SuperESCA. The research leading to this result has been supported by the project CALIPSOplus under grant agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Open Access funding provided by University of Basque Country.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Influence of 4f filling on electronic and magnetic properties of rare earth-Au surface compounds

  • Fernandez L.
  • Blanco-Rey M.
  • Castrillo-Bodero R.
  • Ilyn M.
  • Ali K.
  • Turco E.
  • Corso M.
  • Ormaza M.
  • Gargiani P.
  • Valbuena, Miguel Ángel
  • Mugarza A.
  • Moras P.
  • Sheverdyaeva P.M.
  • Kundu A.K.
  • Jugovac M.
  • Laubschat C.
  • Ortega J.E.
  • Schiller F.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

On the promotion of catalytic reactions by surface acoustic waves

  • Boehn, Bernhard von
  • Foerster, Michael
  • von Boehn, Moritz
  • Prat, Jordi
  • Macià Bros, Ferran
  • Casals Montserrat, Blai
  • Waqas Khaliq, Muhammad
  • Hernández Mínguez, Alberto
  • Aballe, Lucía
  • Imbihl, Ronald
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis,sensor and nanotechnology.SAWswere shown to cause astrong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However,the promotion mechanism has not been unambiguously identified. Using stroboscopic X-ray photoelectron spectro-microscopy, we were able to evidence asub-nano-second work function change during propagation of 500 MHz SAWs on a9nm thick platinum film. We quantify the work function change to 455 meV.Such asmall variation rules out that electronic effects due to elastic deformation (strain) play amajor role in the SAW-induced promotion of catalysis.In asecond set of experiments,SAW-induced intermixing of afive monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be amajor cause for catalytic promotion.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward the optimized spintronic response of Sn-doped IrO2 thin films

  • Arias-Egido, Eduardo
  • Laguna-Marco, M. A.
  • Piquer, Cristina
  • Boada, R.
  • Díaz-Moreno, Sofía
Amorphous and polycrystalline Sn‐doped IrO2 thin films, Ir1‐xSnxO2, are grown for the first time. Their electrical response and strength of the spin–orbit coupling are studied in order to better understand and tailor its performance as spin current detector material. These experiments prove that the resistivity of IrO2 can be tuned over several orders of magnitude by controlling the doping content in both the amorphous and the polycrystalline state. In addition, growing amorphous samples increase the resistivity, thus improving the spin current to charge current conversion. As far as the spin–orbit coupling is concerned, the system not only remains in a strong spin–orbit coupling regime but it seems to undergo a slight enhancement in the amorphous state as well as in the Sn‐doped samples., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under contract projects No. MAT2014‐54425‐R and No. MAT2017‐83468‐R. E.A.‐E. acknowledges the Spanish MINECO and the European Social Fund for a FPI (2015) grant. The authors thank Diamond Light Source for access to beamline I20‐Scanning (SP15016) that contributed to the results presented here. The EXAFS experiments were performed at CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. The authors acknowledge the use of Servicio General de Apoyo a la Investigación‐SAI, Universidad de Zaragoza. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. R.B. acknowledges funding support from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska‐Curie grant agreement No. 665919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Possible experimental realization of a basic Z(2) topological semimetal in GaGeTe

  • Haubold, Erik
  • Fedorov, Alexander
  • Pielnhofer, Florian
  • Rusinov, Igor P.
  • Menshchikova, Tatiana V.
  • Duppel, Viola
  • Friedrich, Daniel
  • Weihrich, Richard
  • Pfitzner, Arno
  • Zeugner, Alexander
  • Isaeva, Anna
  • Thirupathaiah, Setti
  • Kushnirenko, Yevhen
  • Rienks, Emile
  • Timur, Kim
  • Chulkov, Eugene V.
  • Büchner, Bernd
  • Borisenk, Sergey
We report experimental and theoretical evidence that GaGeTe is a basic Z2 topological semimetal with three types of charge carriers: bulkoriginated electrons and holes as well as surface state electrons. This electronic situation is qualitatively similar to the classic 3D topological insulator Bi2Se3, but important differences account for an unprecedented transport scenario in GaGeTe. High-resolution angle-resolved photoemission spectroscopy combined with advanced band structure calculations show a small indirect energy gap caused by a peculiar band inversion at the T-point of the Brillouin zone in GaGeTe. An energy overlap of the valence and conduction bands brings both electron and holelike carriers to the Fermi level, while the momentum gap between the corresponding dispersions remains finite. We argue that peculiarities of the electronic spectrum of GaGeTe have a fundamental importance for the physics of topological matter and may boost the material’s application potential, This work was supported by DFG under the Grant No. BO 1912/7-1 as well as Grant Nos. IS 250/2-1 and PF 324/4-1 of the SPP 1666 program, Grant No. RU 776/15-1 of the ERANET-Chemistry program, Tomsk State University Project No. 8.1.01.2018, and St. Petersburg University Project No. 15.61.202.2015. Calculations were performed at the SKIF-Cyberia supercomputer of Tomsk State University and supported by RSF, grant No. 18-12-00169. The authors acknowledge Diamond Light Source for the beamtime at I05 beamline under Proposal No. SI18586 as well as the BESSY II Berlin for the beamtime at 13 ARPES station under Proposal Nos. 171-05051CR and 172-05659CR/R. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement No. 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. S.B. is grateful to BMWi Germany for the support within the framework of WIPANOprogram (Grant No. N 03THW12H04). S.B. is also grateful to BMBF Germany for the support within the framework of Ukrainian-German Excellence Center UKRATOP project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of Nanomorphology on Surface Doping of Organic Semiconductors: The Pentacene−C60F48 Interface

  • Silvestri, Francesco
  • Prieto, Mauricio J.
  • Babuji, Adara
  • Tănase, Liviu C.
  • Caldas, Lucas de Souza
  • Solomeshch, Olga
  • Schmidt, Thomas
  • Ocal, Carmen
  • Barrena, Esther
Establishing the rather complex correlation between the structure and the charge transfer in organic−organic heterostructures is of utmost importance for organic electronics and requires spatially resolved structural, chemical, and electronic details. Insight into this issue is provided here by combining atomic force microscopy, Kelvin probe force microscopy, photoemission electron microscopy, and low-energy electron microscopy for investigating a case study. We select the interface formed by pentacene (PEN), benchmark among the donor organic semiconductors, and a p-type dopant from the family of fluorinated fullerenes. As for Buckminsterfullerene (C60), the growth of its fluorinated derivative C60F48 is influenced by the thickness and crystallinity of the PEN buffer layer, but the behavior is markedly different. We provide a microscopic description of the C60F48/PEN interface formation and analyze the consequences in the electronic properties of the final heterostructure. For just one single layer of PEN, a laterally complete but noncompact C60F48/PEN interface is created, importantly affecting the surface work function. Nonetheless, from the very beginning of the second layer formation, the presence of epitaxial and nonepitaxial PEN domains dramatically influences the growth dynamics and extremely well packed two-dimensional C60F48 islands develop. Insightful elemental maps of the C60F48/PEN surface spatially resolve the nonuniform distribution of the dopant molecules, which leads to a heterogeneous work function landscape., This work has been supported by the Spanish government under the projects MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and by the European Union’s Horizon 2020 Research and Innovation Program under grant Agreement No. 730872 and the Marie Skłodowska-Curie Grant Agreement No. 722651 (SEPOMO project). We also acknowledge the Generalitat de Catalunya grant 2017 SGR668. F.S. has been developing this work as part of his doctorate in Materials Science at the Universitat Autonoma de Barcelona (UAB). The SMART instrument was ̀ financially supported by the Federal German Ministry of Education and Research (BMBF) under the contract 05 KS4WWB/4, as well as by the Max-Planck Society. We thank the Helmholtz-Center Berlin for Materials and Energy (HZB) for the allocation of beamtime 192-08486-ST. L.d.S.C. is grateful for the funding through the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany′s Excellence StrategyEXC 2008390540038 (UniSysCat). O.S. acknowledges the support from the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the organic semiconductor side groups on the structural and electronic properties of their interface with dopants

  • Babuji, Adara
  • Silvestri, Francesco
  • Pithan, Linus
  • Richard, Audrey
  • Geerts, Yves Henry
  • Tessler, Nir
  • Solomeshch, Olga
  • Ocal, Carmen
  • Barrena, Esther
Two derivatives of [1]benzothieno[3,2-b][1]benzothiophene (BTBT), namely, 2,7-dioctyl-BTBT (C8-BTBT) and 2,7-diphenyl-BTBT (DPh-BTBT), belonging to one of the best performing organic semiconductor (OSC) families, have been employed to investigate the influence of the substitutional side groups on the properties of the interface created when they are in contact with dopant molecules. As a molecular p-dopant, the fluorinated fullerene C60F48 is used because of its adequate electronic levels and its bulky molecular structure. Despite the dissimilarity introduced by the OSC film termination, dopant thin films grown on top adopt the same (111)-oriented FCC crystalline structure in the two cases. However, the early stage distribution of the dopant on each OSC film surface is dramatically influenced by the group side, leading to distinct host–dopant interfacial morphologies that strongly affect the nanoscale local work function. In this context, Kelvin probe force microscopy and photoelectron emission spectroscopy provide a comprehensive picture of the interfacial electronic properties. The extent of charge transfer and energy level alignment between OSCs and dopant are debated in light of the differences in the ionization potential of the OSC in the films, the interface nanomorphology, and the electronic coupling with the substrate., This work has been funded by the Spanish Government through projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S). We thank the 2017-SGR668 recognition. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. F.S. acknowledges the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). O.S. acknowledges the support of the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program. Y.H.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi-Fast no. T.0072.18, and 2Dto3D no. 30489208. Financial supports from the French Community of Belgian (ARC no. 20061) are also acknowledged. A.R. acknowledges doctoral fellowship support from the FRIA. We thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Artificial double-helix for geometrical control of magnetic chirality

  • Sanz-Hernández, Dédalo
  • Hierro-Rodríguez, Aurelio
  • Donnelly, Claire
  • Pablo-Navarro, Javier
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Magén, César
  • McVitie, Stephen
  • Teresa, José María de
  • Ferrer, Salvador
  • Fischer, Peter
  • Fernández-Pacheco, Amalio
Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currently, chiral magnetism requires either a restricted group of natural materials or synthetic thin-film systems that exploit interfacial effects. Here, using state-of-the-art nanofabrication and magnetic X-ray microscopy, we demonstrate the imprinting of complex chiral spin states via three-dimensional geometric effects at the nanoscale. By balancing dipolar and exchange interactions in an artificial ferromagnetic double-helix nanostructure, we create magnetic domains and domain walls with a well-defined spin chirality, determined solely by the chiral geometry. We further demonstrate the ability to create confined 3D spin textures and topological defects by locally interfacing geometries of opposite chirality. The ability to create chiral spin textures via 3D nanopatterning alone enables exquisite control over the properties and location of complex topological magnetic states, of great importance for the development of future metamaterials and devices in which chirality provides enhanced functionality., This work was funded by EPSRC Early Career Fellowship EP/M008517/1, the Winton Program for the Physics of Sustainability, and the EU CELINA COST action. D.S.-H. acknowledges a Girton College Pfeiffer scholarship and support from the EPSRC CDT in Nanoscience and Nanotechnology. A.H.-R. and S.M.V. acknowledge funding from the EU Horizon 2020 program through Marie Skłodowska-Curie Action H2020-MSCA-IF-2016-74695. C.D. acknowledges funding from Leverhulme Trust (ECF-2018-016), Isaac Newton Trust (18-08), and a L’Oréal-UNESCO UK and Ireland Fellowship for Women in Science 2019. Funding by the Spanish Ministry of Science is acknowledged, grants MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and MAT2018-102627-T, and by Aragon Government (Construyendo Europa desde Aragón), grant E13_20R including European Social Fund. J.P.-N. acknowledges MINECO funding BES-2015-072950. S.M.V. appreciates support from EPSRC EP/M024423/1. P.F. was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, Contract No. DE-AC02-05-CH11231 (NEMM program MSMAG). These experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff and CALIPSOplus (Grant 730872) funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An interplay between electronic and structural effects on the photoluminescence decay mechanisms in LaPO4·: N H2O:Tb3+ and LaPO4:Tb3+ single-crystal nanorods

  • Colomer, María T.
  • Díaz-Moreno, Sofía
  • Tamayo Hernando, Aitana
  • Ortiz, A.L.
  • Chaboy, Jesús
[EN] A novel High Energy Resolution Fluorescence Detected X-ray Absorption Spectroscopy (HERFD-XAS) study at the Tb L-edge for the rhabdophane-type LaPO·nHO:Tb and the monazite-type LaTbPO:Tb nanorods is reported. We have observed that the changes in the white-line intensity follow a similar trend to that previously observed in the photoluminescence behaviour of these materials. Those changes have been assigned to the localization of the terbium 5d states and the modification induced by the hybridization with the next neighbours as the terbium content is varied. The interplay between electronic (d-state localization) and structural (local disorder) effects is used to explain the different optical behaviour between the two series of nanorods. The XAS results indicate that the local ordering is a key factor influencing the different emission efficiencies, quenching effects and decay lifetimes observed experimentally for both series of nanorods. The present results indicate that the long lifetime decay process is accounted within a standard single Tb ion scenario, where the structural disorder, favoured by the presence of water molecules in the structure, aids the non-radiative recombination processes. Implications for future use of the white-line intensity in the HERFD-XAS spectra in characterizing other luminescent materials are also discussed., The research leading to these results has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 and by the Ministerio de Economía y Competitividad (MINECO, Government of Spain) and FEDER funds under Grant no. MAT2016-78700-R and MAT2016-76638-R. We acknowledge Diamond Light Source for time on Beamline I20-Scanning under Proposal SP-15968. The authors are also grateful to Prof. A. de Andrés for her useful suggestions and to Mrs C. Díaz-Dorado for her help in the preparation of TEM and PL pictures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the Promotion of Catalytic Reactions by Surface Acoustic Waves

  • Boehn, Bernhard von
  • Foerster, Michael
  • Boehn, Moritz von
  • Prat, Jordi
  • Macià, Ferran
  • Casals, Blai
  • Khaliq, Muhammad W.
  • Hernández Mínguez, Alberto
  • Aballe, Lucía
  • Imbihl, Ronald
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis, sensor and nanotechnology. SAWs were shown to cause a strong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However, the promotion mechanism has not been unambiguously identified. Using stroboscopic X‐ray photoelectron spectro‐microscopy, we were able to evidence a sub‐nanosecond work function change during propagation of 500 MHz SAWs on a 9 nm thick platinum film. We quantify the work function change to 455 μeV. Such a small variation rules out that electronic effects due to elastic deformation (strain) play a major role in the SAW‐induced promotion of catalysis. In a second set of experiments, SAW‐induced intermixing of a five monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be a major cause for catalytic promotion., The authors thank Werner Seidel for technical support in the fabrication of the IDTs, Rolf J. Haug, Hannover, for help in preparation of the samples, and Leo Zhigilei for carefully reading the manuscript. The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. LA and MF acknowledge support from Spanish MINECO through Grant No. RTI2018‐095303‐B‐C53. FM and BC acknowledges support from Spanish MINECO through Grants No. RYC‐2014‐16515, No. MAT2015‐69144‐P, No. SEV‐2015‐0496 and No. MAT2017‐85232‐R. Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser synthesis of TiO2–carbon nanomaterial layers with enhanced photodegradation efficiency towards antibiotics and dyes

  • Ivan, R.
  • Pérez del Pino, Ángel
  • Yousef, I.
  • Logofatu, Constantin
  • Gyorgy, Eniko
Graphene-based photocatalytic layers were prepared by reactive matrix assisted pulsed laser evaporation technique. Binary, nitrogen doped reduced graphene oxide (RGO)/TiO2 and ternary RGO/TiO2/graphitic carbon nitride (g-C3N4) compounds were synthesized and simultaneously deposited onto solid substrates. Aqueous dispersions of commercial graphene oxide platelets and TiO2 nanoparticles were prepared. NH3 or melamine powder was added to the dispersions to achieve enhanced nitrogen doping and synthesis of g-C3N4 during laser irradiation. The photocatalytic efficiency of the layers towards degradation of antibiotic, chloramphenicol and organic dye molecules was systematically investigated and correlated with structural, compositional, and morphological features. This study provides new insights into the importance of TiO2 crystal facets and the synergistic effects between TiO2 nanocrystals and the other constituents, nitrogen doped RGO and g-C3N4 of the hybrid layers. As a result of combined effect of constituent materials, TiO2, RGO, and g-C3N4 as well as N doping of RGO, through the generation of quaternary and pyrrolic N functionalities, the composite layers showed high photocatalytic efficiency for degradation of organic molecules. Stability and reusability experiments indicated that the composite layers maintain their high photodegradation efficiency towards organic molecules during consecutive degradation cycles. Active radical scavenging experiments were also carried out in order to determine the role of the main active species involved in the photocatalytic degradation process., The authors thank the financial support of the Executive Unit for Financing Higher Education, Research, Development and Innovation of the Romanian Ministry of Education and Scientific Research under the contract PN-III-P4-ID-PCE-2016-0550, the Spanish Ministry of Economy, Industry, and Competitiveness under the project ENE2017-89210-C2-1-R, AEI/FEDER,EU. ICMAB acknowledges financial support from the Spanish Ministry of Economy, Industry, and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). SR-FTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff and CALIPSOplus (Grant 730872) funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of Nb-doping on the local structure and thermoelectric properties of transparent TiO2:Nb thin films

  • Ribeiro, J.M.
  • Correia, Filipe C.
  • Kuzmin, A.
  • Jonane, I.
  • Kong, M.
  • Goñi, Alejandro R.
  • Reparaz, J. S.
  • Kalinko, A.
  • Welter, E.
  • Tavares, C.J.
Transparent n-type niobium-doped titanium dioxide thin films (TiO2:1.5 at.%Nb) with pronounced thermoelectric properties were produced from a composite Ti:Nb target by reactive magnetron sputtering. The thin films were comprehensively characterized by X-ray diffraction, X-ray photoelectron spectroscopy, optical spectroscopy, electrical conductivity, and thermoelectric measurement techniques. The local structure of the thin films was investigated in detail by X-ray absorption spectroscopy at the Ti and Nb K-edges. A set of radial distribution functions were extracted from the simultaneous analysis of EXAFS data at two absorption edges using the reverse Monte Carlo method. It was found that Nb dopant atoms modify the local environment of the films, but their average structure remains close to that of the anatase phase. This conclusion is also supported by the ab initio simulations of XANES. A very high absolute Seebeck coefficient (S = 155 μV/K) for n-type TiO2 was achieved with Nb doping, yielding a maximum power factor and thermoelectric figure of merit of 0.5 mW m−1 K−2 and 0.18 at a temperature of 300 K, respectively, for a 150 nm thick film. From frequency-domain thermoreflectance experiments, a thermal conductivity value of 1.3 W m−1 K−1 was obtained for the optimized TiO2:Nb film., The experiment at HASYLAB/DESY was performed within the project I-20180036 EC. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Filipe Correia is grateful to the Fundação para a Ciência e Tecnologia (FCT, Portugal) for the Ph.D. Grant SFRH/BD/111720/2015. Joana Ribeiro is grateful to the Project WinPSC - POCI-01-0247-FEDER-017796, for the research grant, co-funded by the European Regional Development Fund (ERDF), through the Operational Programme for Competitiveness and Internationalisation (COMPETE 2020), under the PORTUGAL 2020 Partnership Agreement. The authors acknowledge the funding from the following institution Fundação para a Ciência e Tecnologia (FCT, Portugal)/PIDDAC through the Strategic Funds project reference UID/FIS/04650/2013. The Spanish Ministry of Economy, Industry, and Competitiveness through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496), projects No. MAT2017-90024-P (TANGENTS)-EI/FEDER and MAT2015-70850-P (HIBRI2), and the Generalitat de Catalunya through grant 2017-SGR-00488. M. K. acknowledges the Ph.D. programme in Materials Science from Universitat Autonoma de Barcelona in which she is enrolled., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design Dependence of the Interface Structure and Crystalline Order of Organic Semiconductor/Dopant Heterojunctions: Pentacene/C60F48

  • Silvestri, Francesco
  • Linus Pithan
  • Babuji, Adara
  • Ocal, Carmen
  • Barrena, Esther
Planar and mixed heterojunctions are the common architectures respectively used for contact and bulk doping in organic electronics. Beyond the success of empirical methods, knowing how the incorporation of dopant molecules affects the structural properties of the organic semiconductor film is essential for the design optimization of devices with efficient electrical properties. With this aim, we exploit out-of-plane and grazing incidence X-ray diffraction (GIXD) to characterize engineered heterojunctions fabricated on native SiO2 substrates with pentacene as an organic semiconductor and C60F48 as a dopant. A strong interaction between the two species is inferred, which dramatically influences the crystalline order in the different architectures. While C60F48 crystalline domains orient randomly on the SiO2 surface, the ulterior deposition of pentacene is demonstrated to induce the orientational order and reorganization of the underlying C60F48. In the inverse architecture, the highly [001]-oriented pentacene film on SiO2 has a template effect on C60F48, inducing the formation of a face-centered cubic [111]-oriented film and leading to an ordered planar heterostructure. Real-time GIXD reveals the presence of a strained C60F48 layer at the interface with a gradual relaxation and transition to 3D crystallite formation with increasing coverage. When mixed in the bulk by co-evaporation, the dopant adopts an amorphous state, embedded in a polycrystalline pentacene matrix. The interfacial effects reported here would have relevant repercussion on the efficiency of molecular doping, which makes it possible to foresee the establishment of guidelines for device performance improvement through interface engineering., This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S) and by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). The authors also acknowledge the Generalitat de Catalunya grant 2017 SGR668. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autonoma de Barcelona (UAB). A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. The authors thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. The authors are grateful to Nir Tessler and Olga Solomeshch from the Nanoelectronic Center of Technion (Haifa, Israel) for providing the dopant molecule., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Liquid-Crystalline Non-Fullerene Acceptor Enabling HighPerformance Organic Solar Cells

  • Mondelli, Pierluigi
  • Silvestri, Francesco
  • Ciammaruchi, Laura
  • Solano, Eduardo
  • Beltrán Gracia, Eduardo
  • Barrena, Esther
  • Riede, Moritz
  • Morse, Graham
cThe use of liquid crystalline (LC) compounds in organic photovoltaics has revealed to be an effective strategy to optimise the bulk heterojunction morphology, repairing structural defects through their self-assembling properties. Nonetheless, the design of LC materials has mostly been limited to donor molecules in previous reports. Here we introduce a Non-Fullerene Acceptor (NFA), 4TICO, characterised by an improved structural flexibility, which is imparted by the alkoxy sidechain and favours the formation of LC phases at high temperature. This structural polymorphism also occurs in films where the 4TICO is blended with the PBTZT-stat-BDTT-8 polymer. The high-temperature LC polymorph brings to the formation of a smooth surface morphology with less structural defects, providing solar cells with improved short-circuit current (Jsc) and fill factor (FF), by 14% and 20% respectively. An in-depth investigation of the NFA structural properties in relation to the solar cells performance and charge transport is carried out in comparison to the 4TIC crystalline isomer., P. M. and F. S. acknowledge the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska Curie Grant agreement no. 722651 (SEPOMO) for the support in the realization of this work. This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S) and by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872. E.B. and F.S. also acknowledge the Generalitat de Catalunya grant 2017 SGR668. P.M has carried out his work within the framework of the doctoral program (PhD) in Optics and Photonics of Condensed Matter Physics (Department of Physics) at the Chemnitz University of Technology and F. S. in Material Science (Department of Physics) at the Universitat Autònoma de Barcelona (UAB). GIWAXS experiments were performed at NCD-SWEET beamline at ALBA synchrotron (Beamtime ID: 2019093873) with the collaboration of ALBA staff. The authors thank Dr Pascal Kaienburg of the University of Oxford and Dr Mariano Campoy-Quiles of ICMAB for their valuable suggestions and fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insight into the temperature evolution of electronic structure and mechanism of exchange interaction in EuS

  • Fedorov, Alexander
  • Poelchen, Georg
  • Eremeev, Sergey V.
  • Schulz, Susanne
  • Generalov, Alexander
  • Polley, Craig
  • Laubschat, Clemens
  • Kliemt, Kristin
  • Kaya, N.
  • Krellner, Cornelius
  • Chulkov, Eugene V.
  • Kummer, Kurt
  • Usachov, Dmitry Yu.
  • Ernst, Arthur
  • Vyalikh, Denis V.
Discovered in 1962, the divalent ferromagnetic semiconductor EuS (TC = 16.5 K, Eg = 1.65 eV) has remained constantly relevant to the engineering of novel magnetically active interfaces, heterostructures, and multilayer sequences and to combination with topological materials. Because detailed information on the electronic structure of EuS and, in particular, its evolution across TC is not well-represented in the literature but is essential for the development of new functional systems, the present work aims at filling this gap. Our angle-resolved photoemission measurements complemented with first-principles calculations demonstrate how the electronic structure of EuS evolves across a paramagnetic–ferromagnetic transition. Our results emphasize the importance of the strong Eu 4f–S 3p mixing for exchange-magnetic splittings of the sulfur-derived bands as well as coupling between f and d orbitals of neighboring Eu atoms to derive the value of TC accurately. The 4f–3p mixing facilitates the coupling between 4f and 5d orbitals of neighboring Eu atoms, which mainly governs the exchange interaction in EuS., This work was supported by the German Research Foundation (DFG) through Grant No. KR3831/5-1, No. LA655/20-1, No. SFB1143 (Project No. 247310070), and No. TRR288 (422213477, project A03). We acknowledge support from the Russian Foundation for Basic Research (Grant No. 20-32-70127) and Saint-Petersburg State University (Grant No. ID 73028629). S.V.E. acknowledges support from a government research assignment for ISPMS SB RAS (Project FWRW-2019-0032). We acknowledge MAX-IV Laboratory for time on the Bloch Beamline under Proposal 20190824. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496. The research has also been supported by the project CALIPSO plus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reduced carbon monoxide saturation coverage on vicinal palladium surfaces: the importance of the adsorption site

  • Garcia-Martinez, Fernando
  • Dietze, Elisabeth
  • Schiller, Frederik
  • Gajdek, Dorotea
  • Merte, Lindsay R.
  • Gericke, Sabrina M.
  • Zetterberg, Johan
  • Albertin, Stefano
  • Lundgren, Edvin
  • Grönbeck, Henrik
  • Ortega, J. Enrique
Steps at metal surfaces may influence energetics and kinetics of catalytic reactions in unexpected ways. Here, we report a significant reduction of the CO saturation coverage in Pd vicinal surfaces, which in turn is relevant for the light-off of the CO oxidation reaction. The study is based on a systematic investigation of CO adsorption on vicinal Pd(111) surfaces making use of a curved Pd crystal. A combined X-ray Photoelectron Spectroscopy and DFT analysis allows us to demonstrate that an entire row of atomic sites under Pd steps remains free of CO upon saturation at 300 K, leading to a step-density-dependent reduction of CO coverage that correlates with the observed decrease of the light-off temperature during CO oxidation in vicinal Pd surfaces., We acknowledge financial support from the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P, PID2019-107338RB-C63, PID2020-116093RB-C44), the Basque Government (Grants IT-1255-19), the Knut and Alice Wallenberg foundation (DNR KAW 2015.0058 ”Atomistic Design of new Catalysts”), and the Swedish Research Council (DNR 349-2011-6491 “Catalysis on the Atomic Scale”). Financial support is acknowledged from the Swedish Research Council (2016-5234). The DFT calculations were performed at C3SE (Göteborg) via a SNIC grant. We acknowledge MAX IV Laboratory support, in particular Alexei Preobrajenski, for their help in synchrotron experiments, which were carried out at the FlexPES beamline under Proposal 20190717. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496. Moreover, the research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong strain gradients and phase coexistence at the metal-insulator transition in VO2 epitaxial films

  • Rodríguez, Laura
  • Sandiumenge, Felip
  • Frontera, Carlos
  • Caicedo, José Manuel
  • Padilla-Pantoja, Jessica
  • Catalán, Gustau
  • Santiso, José
The proximity of a thermodynamic triple point and the formation of transient metastable phases may result in complex phase and microstructural trajectories across the metal-insulator transition in strained VO2 films. A detailed analysis using in-situ synchrotron X-ray diffraction unveils subtle fingerprints of this complexity in the structure of epitaxial films. During phase transition the low-temperature monoclinic M1 phase is constrained along the {111}R planes by the coexisting high-temperature R phase domains, which remain epitaxially clamped to the substrate. This geometrical constraint induces counteracting local stresses that result in a combined tilt and uniaxial in-plane compression of M1 domains, and a concomitant anomalous cR-axis elongation. This mechanism progressively transforms the M1 phase into the transitional triclinic phase (T), and ultimately into the monoclinic M2 phase, generating strong strain and tilt gradients that remain frozen after the complete transformation of the R phase upon cooling to RT. The transformation path of VO2 films, the complex competition between stable and metastable VO2 polymorphs and its impact on the structure of the low temperature monoclinic state, provide essential insights for understanding the electronic and mechanical properties of the films at the nanoscale, as well as to control their use in functional devices., This work was supported in part by the Spanish Ministry of Economy, Industry and Competitiveness (projects MAT2016-77100-C2-1-P and PID2019-108573GB-C21), and by the Catalan AGAUR agency (project: 2017-SGR-579). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme (SEV-2017-0706). LR acknowledges the support of Severo Ochoa programme and ICN2 for her PhD grant. Part of the measurements were carried out at the KMC-II instrument at Helmholtz-Zentrum Berlin für Materialien und Energie. Besides, we would like to thank Dr. D. Többens for assistance during the KMC-II experiment. The research leading to this result has been partially supported by the project CALIPSO plus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. F.S. acknowledges the Spanish Ministry of Industry, Economy and Competitiveness (MINECO) for financial support through the “Severo Ochoa” programme for Centers of Excellence in R&D (SEV-2015-0496) and project no. RTI2018-098537-B-C21. The authors acknowledge the support of Dr. E. del Corro for the micro-Raman analysis of the films., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation

  • Salcedo-Abraira, Pablo
  • Babaryk, Artem A.
  • Montero-Lanzuela, E.
  • Contreras Almengor, O.R
  • Cabrero-Antonino, María
  • Grape, Erik Svensson
  • Willhammar, Tom
  • Navalón, Sergio
  • Elkaim, Erik
  • García Gómez, Hermenegildo
  • Horcajada, Patricia
A new porous titanium(IV) squarate metal–organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H amounts for MOF-based materials under simulated sunlight (up to 672 µmol g in 22 h) without any activity loss during at least 10 d., P.S.-A. and A.A.B. contributed equally to this work. The authors acknowledge the Ramón Areces Foundation project H+MOFs, the M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI /10.13039/501100011033 and European Union NextGenerationEU/PRTR) project, and Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033) project. S.N. thanks financial support by Ministerio de Ciencia, Innovatión y Universidades RTI2018-099482-A-I00 project and Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project. H.G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). T.W. acknowledges financial support from the Swedish Research Council (VR, 2019-05465). Parts of this research were carried out at “CRISTAL” at SOLEIL. P.S. and A.A.B. sincerely thank to the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 for the support of the synchrotron experiment.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dimensionality-driven metal–insulator transition in spin–orbit-coupled IrO2

  • Arias-Egido, Eduardo
  • Laguna-Marco, M. A.
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Morellón, Luis
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Haskel, D.
  • Boada, Roberto
  • Díaz-Moreno, Sofía
This article is part of the themed collection: Recent Open Access Articles, A metal–insulator transition is observed in spin–orbit-coupled IrO2 thin films upon reduction of the film thickness. In the epitaxially grown samples, the critical thickness (t ∼ 1.5–2.2 nm) is found to depend on growth orientation (001), (100) or (110). Interestingly from the applied point of view, the insulating behavior is found even in polycrystalline ultrathin films. By analyzing the experimental electrical response with various theoretical models, we find good fits to the Efros–Shklovskii-VRH and the Arrhenius-type behaviors, which suggests an important role of electron correlations in determining the electrical properties of IrO2. Our magnetic measurements also point to a significant role of magnetic order. Altogether, our results would point to a mixed Slater- and Mott-type of insulator., This work was partially supported by the Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER, UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE), the Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033 and by the Aragon Regional Government (Projects No. E12-20R and E28-20R). E. A-E acknowledges the Spanish MINECO and the European Social Fund for an FPI (Formación de Personal Investigador, 2015) grant. R. B. acknowledges funding support from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 665919. This research used resources of the APS, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. We acknowledge Diamond Light Source for time on I20-Scanning under Proposal SP-17266. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation Horizon 2020. The authors acknowledge funding from the project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473) implemented within the European Union's Horizon 2020 Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic, mechanically interlocked porphyrin–carbon nanotubes for quantum computation and spintronics

  • Moreno-Da Silva, Sara
  • Martínez, Jesús I.
  • Develioglu, Aysegul
  • Nieto-Ortega, Belén
  • Juan-Fernández, Leire de
  • Ruiz-Gonzalez, Luisa
  • Picón, Antonio
  • Oberli, Soléne
  • Alonso, Pablo J.
  • Moonshiram, Dooshaye
  • Pérez, Emilio M.
  • Burzurí, Enrique
Atomic-scale reproducibility and tunability endorse magnetic molecules as candidates for spin qubits and spintronics. A major challenge is to implant those molecular spins into circuit geometries that may allow one, two, or a few spins to be addressed in a controlled way. Here, the formation of mechanically bonded, magnetic porphyrin dimeric rings around carbon nanotubes (mMINTs) is presented. The mechanical bond places the porphyrin magnetic cores in close contact with the carbon nanotube without disturbing their structures. A combination of spectroscopic techniques shows that the magnetic geometry of the dimers is preserved upon formation of the macrocycle and the mMINT. Moreover, the metallic core selection determines the spin location in the mMINT. The suitability of mMINTs as qubits is explored by measuring their quantum coherence times (Tm). Formation of the dimeric ring preserves the Tm found in the monomer, which remains in the μs scale for mMINTs. The carbon nanotube is used as vessel to place the molecules in complex circuits. This strategy can be extended to other families of magnetic molecules. The size and composition of the macrocycle can be tailored to modulate magnetic interactions between the cores and to introduce magnetic asymmetries (heterometallic dimers) for more complex molecule-based qubits., E.B. acknowledges funds from the Ministerio de Innovación y Ciencia through the Ramón y Cajal fellowship (RYC2019-028429-I), Programa de Atracción del Talento Investigador de la Comunidad de Madrid (2017-T1/IND-5562), and Spanish Ministerio de Ciencia e Innovación through Project (RTI2018-096075-A-C22). E.M.P. acknowledges the European Research Council (ERC-PoC-842606), MINECO (CTQ2017-86060-P), and Comunidad de Madrid (S2018/NMT-4367). IMDEA Nanociencia receives support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). D.M. thanks the Acciones de Dinamización Europa Investigacion grant (EIN2019-103399) and the Spanish Ministerio de Ciencia, Innovacion y Universidades grant (PID2019-111086RA-I00). A.D. acknowledges funds from the Comunidad de Madrid through project Y2018/NMT4783 (QUIMITRONIC-CM). S.O. and A.P. acknowledge funding from the Comunidad de Madrid through TALENTO Grant 2017-T1/IND-5432 and from Grant RTI2018-097355-A-I00 (MCIU/AEI/FEDER, UE). The research leading to part of the results has further been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. In addition, this research used resources of the XAFS beamline at the Elettra light source (Italy), Petra P64 beamline (Germany), and the Advanced Photon Source (APS, Beamline 29 BM-B) at Argonne National Laboratory (USA). The APS is a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIr

  • Shamsolhodaei, A.
  • Oliveira, J. P.
  • Panton, B.
  • Ballesteros, Belén
  • Schell, N.
  • Zhou, Y.
Laser microwelding was used to join, for the first time, superelastic NiTi to biomedical PtIr which can be used in multicomponent biomedical devices. By process optimization, it was possible to control the formation of the B2 NiTiPt phase, with no intermetallic compounds being formed. The NiTiPt phase inside the fusion zone had a strong metallurgical bonding with the NiTi base material due to the smooth transition of its grain orientation towards 〈111〉 B2 NiTi. The major finding of the present work is the preservation of the NiTi superelastic response in the welded joint as evidenced by the load/unloading cycling up to 6% strain, significantly higher than typically required for biomedical applications., This project has received funding from the EU-H2020 Research and Innovation program under Grant agreement No. 654360 having benefitted from the access provided by ICN2 (Spain) within the framework of the NFFA-Europe Transnational Access Activity. ICN2 is funded by the CERCA program/Generalitat de Catalunya and by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. SEV-2017-0706). JPO acknowledges Fundação para a Ciência e a Tecnologia (FCT - MCTES) for its financial support via the project UIDB/00667/2020 (UNIDEMI). The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 (proposal I-20160912).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset supporting publication "Domain wall automotion in three-dimensional magnetic helical interconnectors"

  • Skoric, Luka
  • Donnelly, Claire
  • Hierro-Rodríguez, Aurelio
  • Cascales Sandoval, Miguel A.
  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Niño Orti, Miguel A.
  • Belkhou, Rachid
  • Abert, Claas
  • Suess, Dieter
  • Fernández-Pacheco, Amalio
Preliminary measurements were performed at HERMES beamline at SOLEIL synchrotron in collaboration with SOLEIL staff, proposal nos. 20200879, 20190565 and 20170904. This work was supported by the EPSRC Cambridge NanoDTC EP/L015978/1,the Winton Program for the Physics of Sustainability, the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020, and by the European Community under the Horizon 2020 Program, Contract no. 101001290, 3DNANOMAG. L. Skoric acknowledges support from St Johns College of the University of Cambridge. C. Donnelly was supported by the Leverhulme Trust (ECF-2018-016), the Isaac Newton Trust (18-08) and the L'Oréal-UNESCO UK and Ireland Fellowship For Women In Science. A. Hierro-Rodriguez acknowledges support from Spanish AEI under project reference PID2019104604RB/AEI/10.13039/501100011033. The authors acknowledge the University of Vienna research platform MMM Mathematics -Magnetism - Materials, and the FWF project I4917., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Domain wall automotion in three-dimensional magnetic helical interconnectors

  • Skoric, Luka
  • Donnelly, Claire
  • Hierro-Rodríguez, Aurelio
  • Cascales Sandoval, Miguel A.
  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Niño Orti, Miguel A.
  • Belkhou, Rachid
  • Abert, Claas
  • Suess, Dieter
  • Fernández-Pacheco, Amalio
The fundamental limits currently faced by traditional computing devices necessitate the exploration of ways to store, compute, and transmit information going beyond the current CMOS-based technologies. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects that are due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work demonstrates a possible mechanism for efficient transfer of magnetic information in three dimensions., This work was supported by the EPSRC Cambridge NanoDTC EP/L015978/1, the Winton Program for the Physics of Sustainability, the project CALIPSOplus (under Grant Agreement No. 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020), and by the European Community (under the Horizon 2020 Program, Contract No. 101001290, 3DNANOMAG). L.S. acknowledges support from St. Johns College of the University of Cambridge. C.D. was supported by the Leverhulme Trust (No. ECF-2018-016), the Isaac Newton Trust (No. 18-08), and the L’Oréal-UNESCO UK and Ireland Fellowship For Women In Science. A.H.-R. acknowledges support from Spanish AEI, under Project Reference No. PID2019-104604RB/AEI/10.13039/501100011033. The authors acknowledge the University of Vienna research platform MMM Mathematics–Magnetism–Materials, the FWF (Project No. I 4917), and Aragon Government through the Project Q-MAD., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the carrier injection barrier of hybrid metal–organic interfaces on rare earth-gold surface compounds

  • Castrillo-Bodero, Rodrigo
  • Blanco-Rey, María
  • Ali, Khadiza
  • Ortega, J. Enrique
  • Schiller, Frederik
  • Fernández, Laura
Magnetic hybrid metal–organic interfaces possess a great potential in areas such as organic spintronics and quantum information processing. However, tuning their carrier injection barriers on-demand is fundamental for the implementation in technological devices. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 surfaces (RE = Gd, Ho and Yb) and studied their growth, electrostatics and electronic structure. CuPc exhibits a long-range commensurability and a vacuum level pinning of the molecular energy levels. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2)., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. We further aknowledge Polina M. Sheverdyaeva and Paolo Moras for the assistance in the VUV-Photoemission beam line of Elettra Synchrotron in Trieste., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin-polarizing electron beam splitter from crossed graphene nanoribbons

  • Sanz, Sofía
  • Papior, Nick
  • Giedke, Géza
  • Sánchez-Portal, Daniel
  • Brandbyge, Mads
  • Frederiksen, Thomas
Junctions composed of two crossed graphene nanoribbons (GNRs) have been theoretically proposed as electron beam splitters where incoming electron waves in one GNR can be split coherently into propagating waves in two outgoing terminals with nearly equal amplitude and zero back-scattering. Here we scrutinize this effect for devices composed of narrow zigzag GNRs taking explicitly into account the role of Coulomb repulsion that leads to spin-polarized edge states within mean-field theory. We show that the beam-splitting effect survives the opening of the well-known correlation gap and, more strikingly, that a spin-dependent scattering potential emerges which spin polarizes the transmitted electrons in the two outputs. By studying different ribbons and intersection angles we provide evidence that this is a general feature with edge-polarized nanoribbons. A near-perfect polarization can be achieved by joining several junctions in series. Our findings suggest that GNRs are interesting building blocks in spintronics and quantum technologies with applications for interferometry and entanglement., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular Layer Deposition of Zeolitic Imidazolate Framework-8 Films

  • Smets, Jorid
  • Cruz, Alexander John
  • Rubio-Giménez, Víctor
  • Tietze, Max L.
  • Kravchenko, Dmitry E.
  • Arnauts, Giel
  • Matavž, Aleksander
  • Wauteraerts, Nathalie
  • Tu, Min
  • Marcoen, Kristof
  • Imaz, Inhar
  • Maspoch, Daniel
  • Korytov, Maxim
  • Vereecken, Philippe M.
  • De Feyter, Steven
  • Hauffman, Tom
  • Ameloot, Rob
Vapor-phase film deposition of metal-organic frameworks (MOFs) would facilitate the integration of these materials into electronic devices. We studied the vapor-phase layer-by-layer deposition of zeolitic imidazolate framework 8 (ZIF-8) by consecutive, self-saturating reactions of diethyl zinc, water, and 2-methylimidazole on a substrate. Two approaches were compared: (1) Direct ZIF-8 “molecular layer deposition” (MLD), which enables a nanometer-resolution thickness control and employs only self-saturating reactions, resulting in smooth films that are crystalline as-deposited, and (2) two-step ZIF-8 MLD, in which crystallization occurs during a postdeposition treatment with additional linker vapor. The latter approach resulted in a reduced deposition time and an improved MOF quality, i.e., increased crystallinity and probe molecule uptake, although the smoothness and thickness control were partially lost. Both approaches were developed in a modified atomic layer deposition reactor to ensure cleanroom compatibility., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 716472, acronym VAPORE), from the Research Foundation Flanders (FWO Vlaanderen) in Projects G085720N and G087422N, from VLAIO in Project HBC.2020.2612, and from KU Leuven in Project C14/20/085. The FWO Vlaanderen large-infrastructure project HERCULES HAXPES (I014018N) is acknowledged. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant SEV-2017-0706). J.S., V.R.-G., G.A., M.T., N.W, and T.H. acknowledge the support of the FWO Vlaanderen for respectively the following fellowships: 11H8121N, 1263622N, 1SA7320N, 12ZK720N, 1SB7921N, and 1295317N. D.E.K. acknowledges the Marie Sklodowska Curie Training Network HYCOAT, Grant Agreement 765378, for the financial support., The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A ferromagnetic Eu-Pt surface compound grown below hexagonal boron nitride

  • Idris Bakhit, Alaa Mohammed
  • Ali, Khadiza
  • Makarova, Anna A.
  • Píš, Igor
  • Bondino, Federica
  • Sant, Roberto
  • Dash, Saroj P.
  • Castrillo-Bodero, Rodrigo
  • Hasegawa, Yuri
  • Ortega, J. Enrique
  • Fernández, Laura
  • Schiller, Frederik
One of the fundamental applications for monolayer-thick 2D materials is their use as protective layers of metal surfaces and in situ intercalated reactive materials in ambient conditions. Here we investigate the structural, electronic, and magnetic properties, as well as the chemical stability in air of a very reactive metal, Europium, after intercalation between a hexagonal boron nitride (hBN) layer and a Pt substrate. We demonstrate that Eu intercalation leads to a hBN-covered ferromagnetic EuPt2 surface alloy with divalent Eu2+ atoms at the interface. We expose the system to ambient conditions and find a partial conservation of the di-valent signal and hence the Eu–Pt interface. The use of a curved Pt substrate allows us to explore the changes in the Eu valence state and the ambient pressure protection at different substrate planes. The interfacial EuPt2 surface alloy formation remains the same, but the resistance of the protecting hBN layer to ambient conditions is reduced, likely due to a rougher surface and a more discontinuous hBN coating., We acknowledge financial support from grants PID2020-116093RB-C44 funded by the Spanish MCIN/AEI/10.13039/501100011033 and the Basque Government (Grant IT-1591-22) as well as from the German BMBF (grant 05K19KER). We acknowledge the European Synchrotron Radiation Facility for provision of beam time on ID32. ESRF access was provided through proposal MA-5454.76 Part of the research leading to the results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Y. H. appreciates the support of Japan Society for the Promotion of Science (JSPS) Overseas Research Fellowships and I. P. and F. B. acknowledge financial support from EUROFEL project (RoadMap Esfri)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel Ir1–xCoxO2 thin films: Growth and characterization

  • Laguna-Marco, M. A.
  • Herrero-Albillos, Julia
  • Aguirre, Myriam H.
  • Rueda-Jiménez, Marcos
  • Mikulska, Iuliia
Ir1–xCoxO2 thin films have been prepared by reactive co–sputtering deposition at room temperature. Composition, structure, electronic properties and electric and magnetic behavior have been analyzed by different techniques including XRR, XRD, TEM microscopy, SQUID magnetometry, electrical resistivity and XAS spectroscopy. After annealing, an Ir1–xCoxO2 substitutional solid solution phase with rutile crystal structure was achieved for a wide Co-doping range 0 ≤ x ≤ 0.6. Starkly departing from the highly insulating behavior of CoO and Co3O4, the electrical resistivity at room temperature of our films is only slightly higher than that of IrO2. Likewise, our work shows that the magnetic response of the doped films is very similar to that of the paramagnetic parent IrO2. Neither ferromagnetism nor enhanced paramagnetism is observed. XAS spectra indicate a Co3+ oxidation state and, correspondingly, an oxidation state of ∼5+ for Ir ions in the polycrystalline Ir0.6Co0.4O2 film. By application of sum rules, a 13 % increase in the spin–orbit coupling is found despite the lattice shrinkage causes a detrimental bandwidth broadening., This work was supported by Project PID2020-115159GB-I00 funded by Spanish MCIN/AEI/10.13039/501100011033 and by the Regional Government of Aragon (Grant No. E12-23R RASMIA). We acknowledge Diamond Light Source for time on B18 under Proposal SP-32410. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2020 MELON project Nº 872631 and H2020-MSCA-RISE-2021 ULTIMATE-I project Nº 101007825., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The electronic structure of 2(5H)-thiophenone investigated by vacuum ultraviolet synchrotron radiation and theoretical calculations

  • Kumar, S.
  • Duflot, D.
  • Jones, N. C.
  • Hoffmann, S. V.
  • García, Gustavo
  • Limão-Vieira, P.
14 pags., 5 figs., 5 tabs., The electronic state spectroscopy of 2(5H)-thiophenone, C4H4OS, has been investigated by high-resolution vacuum ultraviolet photoabsorption in the 3.76–10.69 eV energy range using synchrotron radiation, together with novel quantum chemical calculations performed at the equation of motion coupled cluster singles and doubles (EOM-CCSD) level of theory. The major electronic transitions have been assigned to valence and Rydberg character, with relevant C=O, C=C and C–C stretching vibrations across the entire absorption spectrum. Photolysis lifetimes in the Earth’s atmosphere (0–50 km altitude) have been estimated from the absolute photoabsorption cross-sections, indicating that solar photolysis can be expected to be a strong sink mechanism. Graphical abstract: [Figure not available: see fulltext.]., SK acknowledges the Portuguese National Funding Agency (FCT) through PD/BD/142831/2018 and COVID/BD/152673/2022, and together with PLV the research grant CEFITEC (UIDB/00068/2020). This work was also supported by Radiation Biology and Biophysics Doctoral Training Programme (RaBBiT, PD/00193/2012); UCIBIO (UIDB/04378/2020). D.D. thanks the support from the CaPPA Project (Chemical and Physical Properties of the Atmosphere) funded by the French National Research Agency (ANR) through the PIA (Programme d’Investissement d’Avenir) under Contract No. ANR-10-LABX-005; the Région Hauts de France and the Ministère de l’Enseignement Supérieur et de la Recherche (CPER ECRIN) and the European Fund for Regional Economic Development for their financial support. This work was performed using HPC resources from GENCI-TGCC (Grant No. 2022-A0110801859) and the Centre de Ressources Informatiques (CRI) of the Université de Lille. The authors wish to acknowledge the beam time at the ISA synchrotron, Aarhus University, Denmark. The research leading to this work has been supported by the Project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. GG acknowledges the Spanish Ministerio de Ciencia e Innovación (Project No. PID2019-104727RB-C21) and the EURAMET’s Project 21GRD02 BIOSPHERE. This contribution is also based upon work from the COST Action CA18212-Molecular Dynamics in the GAS phase (MD-GAS), supported by COST (European Cooperation in Science and Technology). Open access funding provided by FCT|FCCN (b-on)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multilayer beamsplitter polarizers for key UV-FUV spectral lines of solar polarimetry

  • Gutiérrez-Luna, Nuria
  • Capobianco, Gerardo
  • Malvezzi, Andrea Marco
  • Honrado-Benítez, Carlos
  • Rodríguez de Marcos, Luís
  • Larruquert, Juan Ignacio
  • Giglia, Angelo
  • Mahne, Nicola
  • Nannarone, Stefano
  • Fineschi, Silvano
14 pags., 10 figs., 3 tabs., Multilayer beamsplitter polarizers have been developed for improved solar polarimetry at key spectral lines. The advantage of beamsplitter polarizers is that a single device separates s from p polarization; this helps minimize attenuation and enables a more compact and lighter polarimeter, which is important for space instruments. Polarizers based on Al/AlF3 multilayers were prepared for both C IV (155 nm) and Mg II (280 nm) lines, and based on Al/MgF2 multilayers for H Lyman ¿ line (121.6 nm). Polarizers were designed to mainly reflect (transmit) s (p) polarization. Beamsplitter performance and throughput are shown to compare advantageously with polarizers in the literature. Beamsplitter polarizers kept a valuable performance after several years of ageing., Ministerio de Ciencia e Innovación (PID2019-105156GB-I00 and ESP2016-76591-P); National Programme for Research, Subdirección General de Proyectos de Investigación. The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced vacuum ultraviolet photoemission from graphene nanoribbons

  • Corso, Martina
  • Lobo-Checa, Jorge
  • Weber, Andrew P.
  • Piquero-Zulaica, Ignacio
  • Abd El-Fattah, Zakaria M.
  • Le Fèvre, Patrick
  • Ortega, J. Enrique
  • Krasovskii, Eugene
Photon-energy dependence of photoemission from seven-atoms-wide armchair graphene nanoribbons (GNRs) is studied experimentally and theoretically up to ¯hω = 95 eV. A strong photon energy dependence of the normal emission from the valence band maximum (VB1) is observed, sharply peaked at ¯hω = 12 eV. The detailed analysis of the light-polarization dependence of the photoemission from VB1 unambiguously characterizes the symmetry of the state. The experimental observations are analyzed based on ab initio one-step theory of photoemission. Off-normal emission is studied in detail and its relation to the standing-wave character of the valence band states is discussed. Excellent agreement with the earlier experiment (Senkovskiy et al 2018 2D Mater. 5 035007) is obtained. Rapid variations of the intensity with the ribbon-transverse photoelectron momentum are predicted from the ab initio theory, which are at variance with the prediction of the tight-binding rigid-wall model. These findings can help interpret angle-resolved photoemission measurements of similar systems. Moreover, the strong enhancement of the photoyield could trigger the GNR application as narrow-band photodetectors and contribute to the design of novel photocathodes for vacuum ultraviolet photodetection., We acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN, Grants No. PID2019-107338RB-C63, PID2019-107338RB-C64 & PID2019-105488GB-I00 / AEI / 10.13039/501100011033 and RED2018-102833-T), from the Basque Government (IT1591-22), and from the regional Governments of Aragon (E12-20R). The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Program for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CO and O2 interaction with kinked Pt surfaces

  • Garcia-Martinez, Fernando
  • Turco, Elia
  • Schiller, Frederik
  • Ortega, J. Enrique
We investigate the chemical interaction of carbon monoxide (CO) and oxygen (O2) with kink atoms on steps of platinum crystal surfaces using a specially designed Pt curved sample. We aim at describing the fundamental stages of the CO oxidation reaction, i.e., CO-covered/poisoned stage and O-covered/active stage, at the poorly known kinked Pt facets by probing CO uptake/saturation and O2 saturation, respectively. Based on the systematic analysis that the curved surface allows, and using high-resolution X-ray photoemission, a diversity of terrace and step/kink species are straightforwardly identified and accurately quantified, defining a smooth structural and chemical variation across different crystal planes. In the CO-saturated case, we observe a preferential adsorption at step edges, where the CO coverage reaches a CO molecule per step Pt atom, significantly higher than their close-packed analogous steps with straight terrace termination. For the O-saturated surface, a significantly higher O coverage is observed in kinked planes compared to the Pt(111) surface. While the strong adsorption of CO at the kinked edges points toward a higher ignition temperature of the CO oxidation at kinks as compared to terraces, the large O coverage at steps may lead to an increased reactivity of kinked surfaces during the active stage of the CO oxidation., We acknowledge financial support from grants PID2020-116093RB-C44 and PID2019-107338RB-C6-3, funded by the Spanish MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, the Basque Government (Grant IT-1591-22), and the Diputación Foral de Gipuzkoa (Gipuzkoa Next program). We acknowledge Elettra Sincrotrone Trieste for providing access to its synchrotron radiation facilities, and we thank E. Tosi and P. Lacovig for assistance in using beamline SuperESCA. The research leading to this result has been supported by the project CALIPSOplus under grant agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Open Access funding provided by University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

X-ray photoabsorption-induced processes within protonated rifamycin sodium salts in the gas phase

  • Abdelmouleh, Marwa
  • Espinosa Rodríguez, Andrea
  • Leroux, Juliette
  • Christodoulou, Pinelopi
  • Bernay, Benoît
  • Schlathölter, Thomas
  • Poully, Jean Christophe
9 pages, 5 figures, Abstract: Up to now, the response of antibiotics upon ionizing radiation has been very scarcely reported. Here, we present the results of X-ray photoabsorption experiments on isolated rifamycin, a broad-range antibiotic against Gram-positive and Gram-negative bacteria. A mass spectrometer has been coupled to a synchrotron beamline to analyze cationic products of photoabsorption on protonated rifamycin dimer and monomer sodium salts. Absorption of a single photon in the 100–300eV energy range leads to ionization of the molecular system, followed by vibrational energy deposition and subsequent inter- and/or intramolecular fragmentation. Interestingly, we observe a proton transfer from sodiated rifamycin to rifamycin, a widely observed process in ionized molecular systems in the gas phase. Moreover, we show that another charge-transfer process occurs in both dimer and monomer: intramolecular sodium transfer, which has not been reported yet, to the best of our knowledge. Graphic Abstract: [Figure not available: see fulltext.], This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 730872. M. Abdelmouleh is grateful to the PSIME doctoral school (Normandie Universite, Caen) for funding a mission in Berlin, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal Positions and Translocation Pathways of the Dodecameric Ferritin-like Protein Dps

  • Zeth, Kornelius
  • Sancho-Vaello, Enea
  • Okuda, Mitsuhiro
Iron storage in biology is carried out by cage-shaped proteins of the ferritin superfamily, one of which is the dodecameric protein Dps. In Dps, four distinct steps lead to the formation of metal nanoparticles: attraction of ion-aquo complexes to the protein matrix, passage of these complexes through translocation pores, oxidation of these complexes at ferroxidase centers, and, ultimately, nanoparticle formation. In this study, we investigated Dps from Listeria innocua to structurally characterize these steps for Co2+, Zn2+, and La3+ ions. The structures reveal that differences in their ion coordination chemistry determine alternative metal ion-binding sites on the areas of the surface surrounding the translocation pore that captures nine La3+, three Co2+, or three Zn2+ ions as aquo clusters and passes them on for translocation. Inside these pores, ion-selective conformational changes at key residues occur before a gating residue to actively move ions through the constriction zone. Ions upstream of the Asp130 gate residue are typically hydrated, while ions downstream directly interact with the protein matrix. Inside the cavity, ions move along negatively charged residues to the ferroxidase center, where seven main residues adapt to the three different ions by dynamically changing their conformations. In total, we observed more than 20 metal-binding sites per Dps monomer, which clearly highlights the metal-binding capacity of this protein family. Collectively, our results provide a detailed structural description of the preparative steps for amino acid-assisted biomineralization in Dps proteins, demonstrating unexpected protein matrix plasticity., Part of this work was supported by the Spanish Ministry of Economy, Industry and Competitiveness under Projects BIO2015-72790-EXP and BIO2017-88822-R. These experiments were performed at the BL-13 XALOC beamline at the ALBA synchrotron with the collaboration of ALBA staff and CALIPSOplus (Grant 730872) funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Europium intercalation as a route to modulate electronic and magnetic properties of h-BN/Ni(111)

  • Voloshina, Elena
  • Schiller, Frederik
  • Ali, Khadiza
  • Idris Bakhit, Alaa Mohammed
  • Castrillo-Bodero, Rodrigo
  • Paulus, Beate
  • Dedkov, Yuriy
This article is part of the themed collection: 2025 Nanoscale HOT Article Collection., We present a combined density functional theory (DFT) and photoelectron spectroscopy (PES) study of the electronic and magnetic properties of the intercalation-like system, where europium (Eu) is intercalated at the interface between hexagonal boron nitride (h-BN) and a Ni(111) substrate. From the theory side two interface models are considered: (i) a sharp h-BN/Eu/Ni(111) structure and (ii) an interfacial EuNi5 alloy. In both cases, Eu intercalation restores the π-band dispersion of h-BN and induces doping effects, with the energy shift of the π-band at the Γ point found to be highly sensitive to the interfacial structure. Our results show that Eu retains a localized magnetic moment in both configurations, with distinct coupling to the substrate. Simulated B 1s and N 1s core-level shifts and near-edge X-ray absorption spectra provide further insights into the local bonding environment and interfacial interaction strength. Further systematic electron diffraction and PES experiments support the formation of the sharp h-BN/Eu/Ni(111) interface as derived from the matching of experimentally derived positions of B 1s and N 1s core-levels as well as valence bands dispersions to the theoretical results. These findings offer a framework for understanding the role of rare-earth intercalation in tuning the properties of 2D/metal interfaces and pave the way for future spintronic applications., E. V. acknowledges the support by the European Union's NextGenerationEU program. Y. D. acknowledge the support by the project Centre for Advanced Laser Techniques (CALT), co-funded by the European Union through the European Regional Development Fund under the Competitiveness and Cohesion Operational Programme (Grant No. KK.01.1.1.05.0001). The authors gratefully acknowledges the computing time granted by the Resource Allocation Board and provided on the supercomputer Lise at NHR@ZIB as part of the NHR infrastructure. The calculations for this research were conducted with computing resources under the project bec00256. Experiments at Elettra were performed with the help of the beamline scientists P. Moras, P. M. Sheverdyaeva, and A. K. Kundu. This experiment has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. The authors thank financial support from Spanish MINECO (MAT-2017-88374-P), PID2023-149158OB-C44 funded by MICIU/AEI/10.13039/501100011033/ and Basque Government Projects IT-1255-19 and IT-1591-22 as well as from Gipuzkoa Next program of the Diputación Foral de Gipuzkoa DFG-2023-CIEN-000077., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Load Partitioning and Strain Compatibility in a Non-Equiatomic Dual-Phase AlCoCrFeNi High-Entropy Alloy Processed by Forging

  • Pérez Zubiaur, Pablo
  • Perosanz, Sergio
  • Medina, Judit
  • Laurín, Edurne
  • Orozco-Caballero, A.
  • Hernández Pascual, R.
  • Stark, Andreas
  • Schell, Norbert
  • Adeva, Paloma
  • Garces, Gerardo
This article belongs to the Special Issue Advanced Manufacturing and Processing Technology for Metallic Materials., The tensile and compressive behavior of hot-forged Al5Co35Cr30Fe20Ni5 high-entropy alloy (HEA) has been studied at room temperature. The forged HEA has a dual-phase microstructure consisting of a predominant face-centered cubic (FCC) matrix and a body-centered cubic (BCC) phase. The BCC phase embeds a low volume fraction of ordered BCC nanoparticles (B2 structure). During forging, the BCC phase recrystallizes more easily than the FCC phase. Yielding is controlled by the deformation of the FCC phase, although BCC grains assume an additional part of the load transferred by FCC grains, even during the elastic regime. During the onset of plastic deformation, slip is activated preferentially in the FCC phase in those grains that are favorably oriented for slip in planes (111). Dislocation pile-ups at FCC/BCC interfaces induce dislocation slip in the BCC phase. In the BCC phase, B2 particles act as effective obstacles to dislocation motion through the Orowan mechanism. As the deformation proceeds, dislocation activity causes an increase in the misorientation in both phases, resulting in the formation of subgrains whose boundaries are effective for blocking dislocation motion. The combination of high strength and ductility arises from the dual-phase FCC–BCC microstructure of the alloy. The load borne by the BCC phase partially relieves the stress applied to the FCC matrix, enabling the latter to continue deforming., We would like to acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under projects PID2019-104382RB-I00 and PID2022-143068OB-I00. The Deutsches Elektronen-Synchrotron (DESY) is acknowledged for providing beamtime at the P07 beamline of the PETRA III synchrotron facility under proposal I-20221015EC. The research leading to this result has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 730872 (CALIPSOplus). We also acknowledge the services provided by the MiNa Laboratory at IMN, as well as funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and electronic properties of stable facets in the 2D material hexagonal boron nitride (hBN) on curved platinum

  • Idris Bakhit, Alaa Mohammed
  • Ali, Khadiza
  • Makarova, Anna A.
  • Píš, Igor
  • Bondino, Federica
  • Schiller, Frederik
A hexagonal boron nitride (hBN) monolayer was grown on a curved crystal c-Pt(331) substrate including all vicinal surfaces between Pt(111) and Pt(110) faces. The surface structure has been studied by a combination of low-energy electron diffraction (LEED) and scanning tunnelling microscopy (STM). We observed that the hBN monolayer covers the entire curved crystal, but induces a faceting subsequent to the growth. We encountered (111), (221), (441), (991), and (110) as stable facets. We assign this faceting to two factors i) a better lattice coincidence and ii) the existence of local covalent bonds and non-local Van der Waals interactions., The electronic structure was characterized by near-edge x-ray absorption fine structure (NEXAFS), X-ray photoemission spectroscopy and angle-resolved photoemission spectroscopy (ARPES). The hBN/Pt(111) has the weakest interacting overlayer system, while the hBN on vicinal surfaces is more strongly bound to the Pt substrate., Additionally, we determined using angle-resolved photoemission measurements (ARPES) that the π band shifts downward when going away from the hBN/Pt(111) surface towards hBN/Pt(110). In the latter case, the π band shift is the largest., We acknowledge financial support from grant PID2020-116093RB-C44 funded by the Spanish MCIN/AEI/10.13039/501100011033, as well as the Basque Government Grant IT-1591-22. The research leading to this result has been further supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research Innovation HORIZON 2020. A.A.M. acknowledge BMBF (grant no. 05K19KER)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

On the evolution of austenite during tempering in high-carbon high-silicon bearing steel by high energy X-Ray diffraction

  • Ribamar, Giovani
  • Miyamoto, Goro
  • Furuhara, Tadashi
  • Escobar, Julian David
  • Ávila Díaz, Julián Arnaldo|||0000-0002-5893-4725
  • Maawad, Emad
  • Schell, Norbert
  • Oliveira, Joao Pedro
  • Goldenstein, Helio
The evolution of retained austenite in a high-carbon high-silicon bearing steel is explored by high energy X-ray diffraction during continuous heating, giving insights on the control of austenite stability or decomposition during fast tempering. Retained austenite suffers two stages of slight decomposition into bainite below 400 °C, while substantial decomposition into ferrite + cementite occurs above 500 °C. Stress relief decreases retained austenite lattice anisotropy, previously introduced by the stresses caused by martensite formation during quenching. The highest rate of austenite carbon enrichment occurs at 370 °C. In comparison, the highest austenite carbon content is obtained at 466 °C, clarifying a process window for quick retained austenite stabilization with mini mal phase decomposition. Austenite achieves intrinsic stacking fault energy values as high as mJ.m-2, avoiding the undesired transformation-induced plasticity effect for bearing application, This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) - Finance Code 001 and FAPESP, grant 2019/00691-0. This work was supported by ICC-IMR, Tohoku University. A. Avila is a Serra Hunter fellow and a CNPq fellow. Hélio Goldenstein and Giovani G. Ribamar acknowledges partial funding from a CNPq grant. JPO acknowledges funding by national funds from FCT - Fundação para a Ciência e a Tecnologia, IP, in the scope of the projects LA/P/0037/2020, UIDP/50025/2020 and UIDB/50025/2020 of the Associate Laboratory Institute of Nanostructures, Nanomodelling and Nanofabrication – i3N. The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for providing experimental facilities. Beamtime was allocated for proposal I-20210899400 EC. The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Disentangling structural and kinetic components of the a-relaxation in supercooled metallic liquids

  • Neuber, Nico
  • Gross, Oliver
  • Frey, Maximilian
  • Bochtler, Benedikt
  • Kuball, Alexander
  • Hechler, Simon
  • Yang, Fan
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Westermeier, Fabian
  • Sprung, Michael
  • Schäfer, Florian
  • Gallino, Isabella
  • Busch, Ralf
  • Ruta, Beatrice
The particle motion associated to the a-relaxation in supercooled liquids is still challenging scientists due to its difficulty to be probed experimentally. By combining synchrotron tech- niques, we report the existence of microscopic structure-dynamics relationships in Pt42.5 Cu27 Ni 9.5P 21 and Pd 42.5Cu 27 Ni9.5 P21 liquids which allows us to disentangle structural and kinetic contributions to the a-process. While the two alloys show similar kinetic fragilities, their structural fragilities differ and correlate with the temperature dependence of the stretching parameter describing the decay of the density fluctuations. This implies that the evolution of dynamical heterogeneities in supercooled alloys is determined by the rigidity of the melt structure. We find also that the atomic motion not only reflects the topological order but also the chemical short-range order, which can lead to a surprising slowdown of the a- process at the mesoscopic length scale. These results will contribute to the comprehension of the glass transition, which is still missing., We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at PETRA III beamline P02.1 and we would like to thank Alexander Schoekel and Michael Wharmby for assistance. Further we want to thank our colleagues B. Adam, L. Ruschel, S.S. Riegler, H. Jiang, V. Lemkova, H. Voigt and J. Schmauch for collaboration and fruitful discussions concerning the topic. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and inno- vation programme (Grant Agreement No 948780). The research activity has been sup- ported by the project CALIPSOplus under the Grant 307 Agreement 730872 from the EU Framework Program for Research 308 and Innovation HORIZON 2020. The authors declare that they have no competing interests. All data needed to evaluate the conclusions in the paper are present in the paper and/or the Supplementary Materials., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Toward the Optimized Spintronic Response of Sn-Doped IrO2 Thin Films

  • Arias-Egido, E.
  • Laguna-Marco, M.A.
  • Piquer, C.
  • Boada, R.
  • Díaz-Moreno, S.
Amorphous and polycrystalline Sn-doped IrO2 thin films, Ir1- xSnxO2, are grown for the first time. Their electrical response and strength of the spin–orbit coupling are studied in order to better understand and tailor its performance as spin current detector material. These experiments prove that the resistivity of IrO2 can be tuned over several orders of magnitude by controlling the doping content in both the amorphous and the polycrystalline state. In addition, growing amorphous samples increase the resistivity, thus improving the spin current to charge current conversion. As far as the spin–orbit coupling is concerned, the system not only remains in a strong spin–orbit coupling regime but it seems to undergo a slight enhancement in the amorphous state as well as in the Sn-doped samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Domain Wall Automotion in Three-Dimensional Magnetic Helical Interconnectors

  • Skoric, Luka
  • Donnelly, Claire
  • Hierro-Rodriguez, Aurelio
  • Cascales Sandoval, Miguel A.
  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Niño, Miguel A.
  • Belkhou, Rachid
  • Abert, Claas
  • Suess, Dieter
  • Fernández-Pacheco, Amalio
The fundamental limits currently faced by traditional computing devices necessitate the exploration of ways to store, compute, and transmit information going beyond the current CMOS-based technologies. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects that are due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work demonstrates a possible mechanism for efficient transfer of magnetic information in three dimensions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Novel Ir1–xCoxO2 thin films: Growth and characterization

  • Laguna–Marco, M. A.
  • Herrero-Albillos, J.
  • Aguirre, M. H.
  • Rueda-Jiménez, M.
  • Mikulska, I.
Ir1–xCoxO2 thin films have been prepared by reactive co–sputtering deposition at room temperature. Composition, structure, electronic properties and electric and magnetic behavior have been analyzed by different techniques including XRR, XRD, TEM microscopy, SQUID magnetometry, electrical resistivity and XAS spectroscopy. After annealing, an Ir1–xCoxO2 substitutional solid solution phase with rutile crystal structure was achieved for a wide Co-doping range 0 ≤ x ≤ 0.6. Starkly departing from the highly insulating behavior of CoO and Co3O4, the electrical resistivity at room temperature of our films is only slightly higher than that of IrO2. Likewise, our work shows that the magnetic response of the doped films is very similar to that of the paramagnetic parent IrO2. Neither ferromagnetism nor enhanced paramagnetism is observed. XAS spectra indicate a Co3+ oxidation state and, correspondingly, an oxidation state of ∼5+ for Ir ions in the polycrystalline Ir0.6Co0.4O2 film. By application of sum rules, a 13 % increase in the spin–orbit coupling is found despite the lattice shrinkage causes a detrimental bandwidth broadening.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced vacuum ultraviolet photoemission from graphene nanoribbons

  • Corso, Martina
  • Lobo-Checa, Jorge
  • Weber, Andrew P
  • Piquero-Zulaica, Ignacio
  • Abd El-Fattah, Zakaria M
  • Le Fèvre, Patrick
  • Enrique Ortega, J
  • Krasovskii, Eugene
Photon-energy dependence of photoemission from seven-atoms-wide armchair graphene nanoribbons (GNRs) is studied experimentally and theoretically up to $\hbar\omega = 95$ eV. A strong photon energy dependence of the normal emission from the valence band maximum (VB1) is observed, sharply peaked at $\hbar\omega = 12$ eV. The detailed analysis of the light-polarization dependence of the photoemission from VB1 unambiguously characterizes the symmetry of the state. The experimental observations are analyzed based on ab initio one-step theory of photoemission. Off-normal emission is studied in detail and its relation to the standing-wave character of the valence band states is discussed. Excellent agreement with the earlier experiment (Senkovskiy et al 2018 2D Mater.5 035007) is obtained. Rapid variations of the intensity with the ribbon-transverse photoelectron momentum are predicted from the ab initio theory, which are at variance with the prediction of the tight-binding rigid-wall model. These findings can help interpret angle-resolved photoemission measurements of similar systems. Moreover, the strong enhancement of the photoyield could trigger the GNR application as narrow-band photodetectors and contribute to the design of novel photocathodes for vacuum ultraviolet photodetection.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On the evolution of austenite during tempering in high-carbon high-silicon bearing steel by high energy X-Ray diffraction

  • Ribamar, Giovani
  • Miyamoto, Goro
  • Furuhara, Tadashi
  • Escobar, Julian David
  • Ávila Díaz, Julián Arnaldo
  • Maawad, Emad
  • Schell, Norbert
  • Oliveira, Joao Pedro
  • Goldenstein, Helio
The evolution of retained austenite in a high-carbon high-silicon bearing steel is explored by high energy X-ray diffraction during continuous heating, giving insights on the control of austenite stability or decomposition during fast tempering. Retained austenite suffers two stages of slight decomposition into bainite below 400 °C, while substantial decomposition into ferrite + cementite occurs above 500 °C. Stress relief decreases retained austenite lattice anisotropy, previously introduced by the stresses caused by martensite formation during quenching. The highest rate of austenite carbon enrichment occurs at 370 °C. In comparison, the highest austenite carbon content is obtained at 466 °C, clarifying a process window for quick retained austenite stabilization with mini mal phase decomposition. Austenite achieves intrinsic stacking fault energy values as high as mJ.m-2, avoiding the undesired transformation-induced plasticity effect for bearing application, This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) - Finance Code 001 and FAPESP, grant 2019/00691-0. This work was supported by ICC-IMR, Tohoku University. A. Avila is a Serra Hunter fellow and a CNPq fellow. Hélio Goldenstein and Giovani G. Ribamar acknowledges partial funding from a CNPq grant. JPO acknowledges funding by national funds from FCT - Fundação para a Ciência e a Tecnologia, IP, in the scope of the projects LA/P/0037/2020, UIDP/50025/2020 and UIDB/50025/2020 of the Associate Laboratory Institute of Nanostructures, Nanomodelling and Nanofabrication – i3N. The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for providing experimental facilities. Beamtime was allocated for proposal I-20210899400 EC. The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Disentangling structural and kinetic components of the a-relaxation in supercooled metallic liquids

  • Neuber, Nico
  • Gross, Oliver
  • Frey, Maximilian
  • Bochtler, Benedikt
  • Kuball, Alexander
  • Hechler, Simon
  • Yang, Fan
  • Pineda Soler, Eloi
  • Westermeier, Fabian
  • Sprung, Michael
  • Schäfer, Florian
  • Gallino, Isabella
  • Busch, Ralf
  • Ruta, Beatrice
The particle motion associated to the a-relaxation in supercooled liquids is still challenging scientists due to its difficulty to be probed experimentally. By combining synchrotron tech- niques, we report the existence of microscopic structure-dynamics relationships in Pt42.5 Cu27 Ni 9.5P 21 and Pd 42.5Cu 27 Ni9.5 P21 liquids which allows us to disentangle structural and kinetic contributions to the a-process. While the two alloys show similar kinetic fragilities, their structural fragilities differ and correlate with the temperature dependence of the stretching parameter describing the decay of the density fluctuations. This implies that the evolution of dynamical heterogeneities in supercooled alloys is determined by the rigidity of the melt structure. We find also that the atomic motion not only reflects the topological order but also the chemical short-range order, which can lead to a surprising slowdown of the a- process at the mesoscopic length scale. These results will contribute to the comprehension of the glass transition, which is still missing., We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at PETRA III beamline P02.1 and we would like to thank Alexander Schoekel and Michael Wharmby for assistance. Further we want to thank our colleagues B. Adam, L. Ruschel, S.S. Riegler, H. Jiang, V. Lemkova, H. Voigt and J. Schmauch for collaboration and fruitful discussions concerning the topic. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and inno- vation programme (Grant Agreement No 948780). The research activity has been sup- ported by the project CALIPSOplus under the Grant 307 Agreement 730872 from the EU Framework Program for Research 308 and Innovation HORIZON 2020. The authors declare that they have no competing interests. All data needed to evaluate the conclusions in the paper are present in the paper and/or the Supplementary Materials., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On the promotion of catalytic reactions by surface acoustic waves

  • Boehn, Bernhard von
  • Foerster, Michael
  • von Boehn, Moritz
  • Prat, Jordi
  • Macià Bros, Ferran
  • Casals Montserrat, Blai
  • Waqas Khaliq, Muhammad
  • Hernández Mínguez, Alberto
  • Aballe, Lucía
  • Imbihl, Ronald
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis,sensor and nanotechnology.SAWswere shown to cause astrong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However,the promotion mechanism has not been unambiguously identified. Using stroboscopic X-ray photoelectron spectro-microscopy, we were able to evidence asub-nano-second work function change during propagation of 500 MHz SAWs on a9nm thick platinum film. We quantify the work function change to 455 meV.Such asmall variation rules out that electronic effects due to elastic deformation (strain) play amajor role in the SAW-induced promotion of catalysis.In asecond set of experiments,SAW-induced intermixing of afive monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be amajor cause for catalytic promotion.
Docta Complutense
Publication Artículo científico (JournalArticle)

Extremely long-range, high-temperature Josephson coupling across a half-metallic ferromagnet

  • Sánchez Manzano, David
  • Cuéllar Jiménez, Fabian Andrés
  • Cabero Piris, Mariona
  • Rouco Gómez, Víctor
  • Orfila Rodríguez, Gloria
  • Tornos Castillo, Javier
  • Rivera Calzada, Alberto Carlos
  • González Calbet, José María
  • León Yebra, Carlos
  • Villegas Hernández, Javier Eulogio
  • Santamaría Sánchez-Barriga, Jacobo
The Josephson effect results from the coupling of two superconductors across a spacer such as an insulator, a normal metal or a ferromagnet to yield a phase coherent quantum state. However, in junctions with ferromagnetic spacers, very long-range Josephson effects have remained elusive. Here we demonstrate extremely long-range (micrometric) high-temperature (tens of kelvins) Josephson coupling across the half-metallic manganite La0.7Sr0.3MnO3 combined with the superconducting cuprate YBa2Cu3O7. These planar junctions, in addition to large critical currents, display the hallmarks of Josephson physics, such as critical current oscillations driven by magnetic flux quantization and quantum phase locking effects under microwave excitation (Shapiro steps). The latter display an anomalous doubling of the Josephson frequency predicted by several theories. In addition to its fundamental interest, the marriage between high-temperature, dissipationless quantum coherent transport and full spin polarization brings opportunities for the practical realization of superconducting spintronics, and opens new perspectives for quantum computing. Josephson coupling over micrometres and at tens of kelvins is demonstrated across the half-metallic manganite La0.7Sr0.3MnO3 combined with the superconducting cuprate YBa2Cu3O7.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Arabidopsis thaliana Zn2+-efflux ATPases HMA2 and HMA4 are required for resistance to the necrotrophic fungus Plectosphaerella cucumerina BMM

  • Escudero Welsch, Viviana|||0000-0002-3506-9054
  • Ferreira Sánchez, Dario|||0000-0003-2825-2886
  • Abreu, Isidro|||0000-0002-1647-9883
  • Sopeña Torres, Sara|||0000-0002-4164-0667
  • Makarovsky Saavedra, Natalia
  • Bernal, María|||0000-0001-7334-5286
  • Krämer, Ute|||0000-0001-7870-4508
  • Grolimund, Daniel|||0000-0001-9721-7940
  • Gonzalez Guerrero, Manuel|||0000-0001-7334-5286
  • Jordá Miró, Lucía|||0000-0002-1660-3469
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Load Partitioning and Strain Compatibility in a Non-Equiatomic Dual-Phase AlCoCrFeNi High-Entropy Alloy Processed by Forging

  • Pérez Zubiaur, Pablo|||0000-0002-4218-2573
  • Perosanz Amarillo, Sergio|||0000-0002-1476-6459
  • Medina Caballero, Judit|||0000-0002-3898-0935
  • Laurín de Toro, Edurne
  • Orozco Caballero, Alberto|||0000-0001-9518-8816
  • Hernández Pascual, Rebeca|||0000-0001-5193-7053
  • Stark, Andreas|||0000-0002-1249-7937
  • Schell, Norbert
  • Adeva Ramos, Paloma|||0000-0002-9111-8893
  • Garcés Plaza, Gerardo
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Wayforlight, the Catalogue of European light sources

  • Blasetti, Cecilia|||0000-0003-3519-8371
  • Andrian, I.
  • Billè, F.
  • Coghetto, E.
  • Deiuri, S.
  • Favretto, D.
  • Turcinovich, M.
  • Pugliese, R.
  • Osmenaj, E.
  • Appleby, G.
  • Froideval, A.
  • Pietsch, U.
  • Sánchez Grueso, Alejandro
  • Valls Vidal, Núria
  • Mitchell, E.
  • Rabhi, N.
  • Aogaki, S.
  • Kasik, Z.
  • Canova, F.
  • Gliksohn, F.
  • Stozno, D.
  • Michel, J.
  • Normand, D.
  • Brancaleon, R.
  • Paro, G.
  • Tinta, M.
  • Zotti, D.
Wayforlight.eu is the gateway to find-ing the most suitable instruments for experiments with synchrotron, FEL, and laser light sources. The portal's main asset is a de-tailed searchable catalogue of facilities, beam-lines, and instrumentation available at Euro-pean light sources. Thanks to its advanced search tools, a visitor can filter beamlines by scientific discipline, by technique, but also by energy range or sample type.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the promotion of catalytic reactions by surface acoustic waves

  • von Boehn, Bernhard|||0000-0003-3722-5767
  • Foerster, Michael|||0000-0002-4147-6668
  • von Boehn, Moritz
  • Prat Albert, Jordi|||0000-0002-9708-4831
  • Macià, Ferran|||0000-0001-5972-4810
  • Casals, Blai|||0000-0002-2941-1861
  • Khaliq, Muhammad Waqas|||0000-0002-9696-3498
  • Hernández-Mínguez, Alberto
  • Aballe, Lucía|||0000-0003-1810-8768
  • Imbihl, Ronald|||0000-0002-5155-7250
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis, sensor and nanotechnology. SAWs were shown to cause a strong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However, the promotion mechanism has not been unambiguously identified. Using stroboscopic X-ray photoelectron spectro-microscopy, we were able to evidence a sub-nanosecond work function change during propagation of 500 MHz SAWs on a 9 nm thick platinum film. We quantify the work function change to 455 μeV. Such a small variation rules out that electronic effects due to elastic deformation (strain) play a major role in the SAW-induced promotion of catalysis. In a second set of experiments, SAW-induced intermixing of a five monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be a major cause for catalytic promotion. Surface acoustic waves (SAWs) are dynamic lattice distortions, which can be excited on piezoelectric materials. For many years a promotion of the catalytic activity and selectivity by SAWs has been known, but no mechanistic understanding has been established yet. We quantify the effect that SAWs have on the electronic and geometric structure of a model catalyst, providing a basis for discussing the promotion mechanism of SAWs in catalytic surface reactions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Strong strain gradients and phase coexistence at the metal-insulator transition in VO2 epitaxial films

  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Frontera, Carlos|||0000-0002-0091-4756
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Catalan, Gustau|||0000-0003-0214-4828
  • Santiso, José|||0000-0003-4274-2101
The proximity of a thermodynamic triple point and the formation of transient metastable phases may result in complex phase and microstructural trajectories across the metal-insulator transition in strained VO films. A detailed analysis using in-situ synchrotron X-ray diffraction unveils subtle fingerprints of this complexity in the structure of epitaxial films. During phase transition the low-temperature monoclinic M1 phase is constrained along the {111} planes by the coexisting high-temperature R phase domains, which remain epitaxially clamped to the substrate. This geometrical constraint induces counteracting local stresses that result in a combined tilt and uniaxial in-plane compression of M1 domains, and a concomitant anomalous c-axis elongation. This mechanism progressively transforms the M1 phase into the transitional triclinic phase (T), and ultimately into the monoclinic M2 phase, generating strong strain and tilt gradients that remain frozen after the complete transformation of the R phase upon cooling to RT. The transformation path of VO films, the complex competition between stable and metastable VO polymorphs and its impact on the structure of the low temperature monoclinic state, provide essential insights for understanding the electronic and mechanical properties of the films at the nanoscale, as well as to control their use in functional devices.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

Size-dependence and high temperature stability of radial vortex magnetic textures imprinted by superconductor stray fields

  • Sánchez Manzano, David
  • Orfila, G.
  • Sander, A.
  • Marcano Prieto, Lourdes|||0000-0001-9397-6122
The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. L.M. acknowledges the European Commission-Horizon Europe for funding under the project ProteNano-MAG (MSCA 101067742). F.G. acknowledges financial support from Ministerio de Economía y Competitividad through the MAT2017-87134-C2-1-R project. J.E.V. acknowledges projects French ANR-22-CE30-0020-01 “SUPERFAST”, Flag ERA ERA-NET “To2Dox”, and Cost Action “SUPERQUMAP”. J., Sanchez-Manzano D., Orfila G., Sander A., Marcano L., Gallego F., Mawass M.-A., Grilli F., Arora A., Peralta A., Cuellar F.A., Fernandez-Roldan J.A., Reyren N., Kronast F., Leon C., Rivera-Calzada A., Villegas J.E., Santamaria J., Valencia S.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

Tuning the magnetic response of magnetospirillum magneticum by changing the culture medium: a straightforward approach to improve their hyperthermia efficiency

  • Gandia, D.
  • Marcano Prieto, Lourdes|||0000-0001-9397-6122
  • Gandarias, L.
  • Villanueva, D.
  • Orue, I.
  • Abrudan, R. M.
  • Valencia, S.
  • Rodrigo, I.
  • Ángel García, J.
  • Muela, A.
  • Fernández Gubieda, M. L.
  • Alonso, J.
This work was supported by the Spanish MICINN/AEI/ 10.13039/501100011033 under Projects MAT2017-83631- C3-R and PID2020-115704RB-C3; CALIPSOplus under the H2020 Grant Agreement 730872 (...)
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

Domain wall automotion in three-dimensional magnetic helical interconnectors

  • Skoric, Luka
  • Donnelly, Claire
  • Hierro Rodríguez, Aurelio|||0000-0001-6600-7801
  • Cascales Sandoval, Miguel Á.
  • Ruiz Gómez, Sandra
  • Foerster, Michael
  • Nino, Miguel A.
  • Belkhou, Rachid
  • Abert, Claas
  • Suess, Dieter
  • Fernández Pacheco, Amalio
EU Horizon 2020 Program [730872, 101001290]; Spanish AEI [PID2019-104604RB/AEI/10.13039/501100011033] (...)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Capítulo o parte de un libro (BookPart)

Determining the magnetic anisotropy at the nanoscale by means of X-ray magnetic-sensitive and element-selective microscopy methods

  • Marcano, Lourdes
  • Gandía Aguado, David
  • Orue, Iñaki
  • García-Prieto, Ana
  • Abrudan, Radu
  • Muela, Alicia
  • Fernández-Gubieda, María Luisa
  • Valencia, Sergio
Magnetic nanoparticles can nowadays be found in a myriad of applications as diverse as data storage, molecular imaging, wastewater treatment, tissue engineering, or targeted cancer therapies. Despite their increasing importance, their individual magnetic properties are unknown to a large extent, given the difficulty in obtaining magnetic information with nanometric resolution. Indeed, the implementation of magnetic nanoparticles relies on average values obtained by measuring a plethora of dissimilar entities. In this chapter, we explain how magnetic-sensitive microscopy techniques, available at large-scale synchrotron radiation facilities, in combination with theoretical simulations, can contribute to overcoming this limitation. As a case study, we present two examples making use of X-ray photoemission electron microscopy (XPEEM) and scanning transmission X-ray microscopy (STXM) to obtain quantitative information concerning the magnetic anisotropy of individual magnetic nanoparticles biosynthesized by magnetotactic bacteria. The method presented here may be considered general and applicable to any magnetic system at the nanoscale., We thank HZB for the allocation of synchrotron radiation beamtime and funding under the project CALIPSOplus (Grant Agreement 730872) from the EU Framework Program for Research and Innovation HORIZON2020. We thank Dr. Markus Weigand for his assistance in the STXM measurements. This work has been funded by MCIN/AEI/10.13039/501100011033 (grant PID2020-115704RB-C31) and by the Basque Government (project IT1479-22).