Skip to main content

ESPECIACION QUIMICA: DE MEDIO AMBIENTE A LA SALUD, UN ENFOQUE NEXUS

CTM2015-65414-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Human hair biogenic fiber as a biosorbent of multiple heavy metals from aqueous solutions

  • Zhang, Helan
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
  • Palet, Cristina|||0000-0002-7467-613X
Human hair natural fiber is mainly considered a waste in our society and its disposal can cause a major environmental impact. Hence, its valorization as a biosorbent of pollutants such as heavy metals is an interesting route to explore since it can reduce the amount of waste and at the same time contributes to the circular economy strategy. In this work, the ability of two kinds of human hairs, used as biosorbents to remove Cr(III), Ni(II), Co(II), Mn(II), Cu(II), Zn(II), Cd(II) and Pb(II) ions from multiple-metal aqueous solutions, were examined and compared under different operating conditions. The influence of the time, pH and initial metal concentration on the metal uptake were studied. The biosorption kinetics and isotherm were also modeled observing that pseudo-second-order kinetic model and Langmuir model fitted successfully experimental data. Moreover, biosorption process did not significantly modify the morphology and the chemical structure of the hair samples, which was proved by SEM and FT-IR studies. These kinetic results underline the satisfactory capacity of human hair for the biosorption of Pb(II), Cu(II) and Cr(II) (values up to 95%), pointing up the high efficacy of human hair for the removal of heavy metal ions from aqueous media.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancement of selective adsorption of Cr species via modification of pine biomass

  • Zhao, Jingjing
  • Boada, Roberto|||0000-0003-4857-8402
  • Cibin, Giannantonio|||0000-0001-5761-6760
  • Palet, Cristina|||0000-0002-7467-613X
Pine biomass (Pine), pine gasification biochar (PG) and pine biomass loaded with TiO2 (Pine/TiO2) were used as sorbent materials to remove Cr(III) or Cr(VI) ions from aqueous solutions. Our results showed that Pine/TiO2 had an improved adsorption capacity respect to Pine being the adsorption capacity for Cr(VI), 12.8 mg/g, much larger than for Cr(III), 1.23 mg/g. On the other hand, PG showed much higher adsorption for Cr(III), 12.4 mg/g, than Pine/TiO2, and negligible adsorption for Cr(VI). To understand this species-dependent adsorption behavior, the adsorption mechanisms, sorbents morphology and functional sites were characterized using a multi-technique approach. The chemical state and local coordination structure of the adsorbed Cr species was studied by X-ray absorption spectroscopy (XAS). Our results show that the adsorption of Cr(III) occurred mainly through cation exchange with mineral elements in PG biochar, whereas the Cr(III) adsorption by functional groups (carboxyl and hydroxyl groups) dominate in the biomass sorbent. The enhancement of Cr(VI) adsorption in Pine/TiO2 can be explained by the presence of TiOH2+groups present in the surface of the TiO2 microparticles. X-ray absorption spectroscopy (XAS) results reveal that Cr(VI) reduces to Cr(III) after being adsorbed by the sorbent materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Valorization of keratin biofibers for removing heavy metals from aqueous solutions

  • Zhang, Helan
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
  • López-Mesas, Montserrat|||0000-0002-4470-0194
  • Palet, Cristina|||0000-0002-7467-613X
Four common waste keratin biofibers (human hair, dog hair, chicken feathers, and degreased wool) have been used as biosorbents for the removal of heavy metal ions from aqueous solutions. Different parameters of the biosorption processes were optimized in batch systems. For multiple-metal systems, consisting of a mixture of eight metal ions [Cr(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II)], the total metal biosorption increased in the order: degreased wool.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mercury speciation in selenium enriched wheat plants hydroponically exposed to mercury pollution

  • Manivannan, Nithyapriya
  • Subirana, Maria Angels
  • Boada, Roberto|||0000-0003-4857-8402
  • Marini, Carlo
  • Llugany, Mercè|||0000-0002-9940-0383
  • Valiente, Manuel|||0000-0003-0766-9922
  • Simonelli, Laura|||0000-0001-5331-0633
Mercury (Hg) pollution in agricultural soils and its potential pathway to the human food chain can pose a serious health concern. Understanding the pathway of Hg in plants and how the speciation may change upon interaction with other elements used for biofortification can be critical to assess the real implications for the final plant-based product. In that respect, selenium (Se) biofortification of crops grown in Se-poor soil regions is becoming a common practice to overcome Se deficient diets. Therefore, it is important to assess the interplay between these two elements since Se may form complexes with Hg reducing its bioavailability and toxicity. In this work, the speciation of Hg in wheat plants grown hydroponically under the presence of Hg (HgCl) and biofortified with Se (selenite, selenate, or a 1:1 mixture of both) has been investigated by X-ray absorption spectroscopy at the Hg L-edge. The main Hg species found in wheat grains was the highly toxic methylmercury. It was found that the Se-biofortification of wheat did not prevent, in general, the Hg translocation to grains. Only the 1:1 mixture treatment seemed to have an effect in reducing the levels of Hg and the presence of methylmercury in grains.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influence of a plant biostimulant on the uptake, distribution and speciation of Se in Se-enriched wheat (Triticum aestivum L. cv. Pinzón)

  • Xiao, Tingting|||0000-0001-9818-8627
  • Boada, Roberto|||0000-0003-4857-8402
  • Marini, Carlo
  • Llugany, Mercè|||0000-0002-9940-0383
  • Valiente, Manuel|||0000-0003-0766-9922
Aim: Selenium (Se) can induce stress in plants. Our main purpose is to assess the effect of a biostimulant, based on hetero-polyoxometalates mixed with humic acids, on Se bio-fortified wheat plants. Secondly, to evaluate a possible modification of the Se species in the plant tissues and to investigate the response of phytohormones. Method: Wheat plants were grown hydroponically and exposed to either selenite (Se(IV)), selenate (Se(VI)) or a mixture of both species (Se(MIX)) in the presence or absence of the biostimulant (foliar, FA; or root application, RA). Biomass, mineral nutrient concentration, phytohormones and Se speciation were investigated. Results: The biostimulant FA did not modify the plant biomass but RA significantly increased the root biomass in all treatments as well as the shoot biomass of plants exposed to Se(VI) and Se(MIX) even when both modes of application caused a severe reduction of IAA levels in shoots. The biostimulant accelerated the translocation of Se from roots to shoots in the presence of Se(VI) and Se(MIX), and it only had a noticeable influence on the Se speciation in roots, but not significant in shoots. X-ray absorption spectroscopy allowed to identify organic Se as the main Se species formed in the shoots. The biostimulant has a mild effect on the Se speciation. Conclusion: The biostimulant has a remarkable influence on both the uptake and accumulation of certain mineral nutrients and the plant metabolism by increasing the biomass under Se exposure. This indicates the potential of this biostimulant that also will prevent the possible Se-induced plant stress.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Co-application of Se and a biostimulant at different wheat growth stages, Influence on grain development

  • Xiao, Tingting|||0000-0001-9818-8627
  • Boada, Roberto|||0000-0003-4857-8402
  • Llugany, Mercè|||0000-0002-9940-0383
  • Valiente, Manuel|||0000-0003-0766-9922
An appropriate selenium intake can be beneficial for human health. Se-biofortified food in Se-deficient regions is becoming an increasingly common practice but there are still issues to be addressed regarding the observed Se-induced toxicity to the plant. In this respect, plant biostimulants are used to enhance nutrition efficiency, abiotic stress tolerance and crop quality. In this work, the efficacy of a plant biostimulant to counteract the Se-induced stress in wheat plants is experimentally assessed. The co-application of different Se-biofortification treatments and the biostimulant at different growth stages (tillering or heading stage) was investigated. The use of micro focused X-ray spectroscopy allows us to confirm organic Se species to be the main Se species found in wheat grain and that the proportion of organic Se species is only slightly affected by the Se application stage. Our study proves that the biostimulant had a key role in the enhancement of both the amount of grains produced per spike and their dry biomass without hindering Se enrichment process, neither diminishing the Se concentration nor massively disrupting the Se species present. This information will be useful to minimize both plant toxicity and economic cost towards a more effective and plant healthy selenium supplementation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis and adsorption behavior of mesoporous alumina and Fe-doped alumina for the removal of dominant arsenic species in contaminated waters

  • Inchaurrondo, Natalia|||0000-0002-5398-634X
  • Di Luca, Carla|||0000-0002-0425-5508
  • Mori, Fernanda
  • Pintar, Albin|||0000-0002-3198-2954
  • Zerjav, Gregor
  • Valiente, Manuel|||0000-0003-0766-9922
  • Palet, Cristina|||0000-0002-7467-613X
Ordered mesoporous Al2O3 and Fe-Al2O3 materials were synthesized at room temperature by an easy and environmentally friendly self-assembly sol-gel route, to be tested for arsenic removal. Solid samples were thoroughly characterized by several techniques. Synthetized and commercial alumina samples were evaluated as adsorbents for the removal of dominant arsenic species under a wide pH range (3.6-11.5). The mesoporous alumina showed higher adsorption capacity (90 mg/g As(V), pHeq 4) than commercial alumina (54 mg/g As(V), pHeq 4), due to its amorphous structure, uniform accessible mesopores and higher surface acidity. The Fe bearing material exhibited strong As affinity. As(III) adsorption resulted much lower than for arsenate (maximum uptake of 16 mg/g, at pH 8), since As(III)-adsorbent interaction is only based on weak Van der Waals force. Arsenic isotherms adjusted well to the Freundlich model and more accurately to the three parameters Sip's model. The kinetics results fitted the Elovich model. As pH increased, adsorption capacity decreased due to the reduction of electrostatic interactions. Under alkaline conditions arsenic desorption was achieved, although the stability of the material was compromised. The presence of several interfering ions was evaluated. Phosphate ions showed the highest interference. The use of a tap water matrix increased As(V) adsorption, encouraging the use of these materials in the treatment of real polluted waters.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Extracellular albumin covalently sequesters selenocompounds and determines cytotoxicity

  • Zheng, Wenyi
  • Boada, Roberto|||0000-0003-4857-8402
  • He, Riu
  • Xiao, Tingting|||0000-0001-9818-8627
  • Ye, Fei|||0000-0002-1679-1316
  • Simonelli, Laura|||0000-0001-5331-0633
  • Valiente, Manuel|||0000-0003-0766-9922
  • Zhao, Ying
  • Hassan, Moustapha
Selenocompounds (SeCs) are well-known nutrients and promising candidates for cancer therapy; however, treatment efficacy is very heterogeneous and the mechanism of action is not fully understood. Several SeCs have been reported to have albumin-binding ability, which is an important factor in determining the treatment efficacy of drugs. In the present investigation, we hypothesized that extracellular albumin might orchestrate SeCs efficacy. Four SeCs representing distinct categories were selected to investigate their cytotoxicity, cellular uptake, and species transformation. Concomitant treatment of albumin greatly decreased cytotoxicity and cellular uptake of SeCs. Using both X-ray absorption spectroscopy and hyphenated mass spectrometry, we confirmed the formation of macromolecular conjugates between SeCs and albumin. Although the conjugate was still internalized, possibly via albumin scavenger receptors expressed on the cell surface, the uptake was strongly inhibited by excess albumin. In summary, the present investigation established the importance of extracellular albumin binding in determining SeCs cytotoxicity. Due to the fact that albumin content is higher in humans and animals than in cell cultures, and varies among many patient categories, our results are believed to have high translational impact and clinical implications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Comparison of biochars derived from different types of feedstock and their potential for heavy metal removal in multiple-metal solutions

  • Zhao, Jing Jing
  • Shen, Xin-Jie
  • Domene, Xavier|||0000-0002-2951-1491
  • Alcañiz, Josep M.|||0000-0002-6438-0909
  • Liao, Xing
  • Palet, Cristina|||0000-0002-7467-613X
Three different types of feedstocks and their biochars were used to remove Cr(III), Cd(II), Cu(II) and Pb(II) ions from a mixture of multiple heavy metals. The effect of the initial concentration of heavy metals in solution has been analysed, and kinetics modelling and a comparison of the adsorption capacity of such materials have been performed to elucidate the possible adsorption mechanisms. The results show that the adsorption capacity is dependent on the type of feedstock and on the pyrolysis conditions. The adsorption capacity of the biomass types is ranked as follows: FO (from sewage sludge)» LO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Use of chemically treated human hair wastes for the removal of heavy metal ions from water

  • Zhang, Helan
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
  • López-Mesas, Montserrat|||0000-0002-4470-0194
  • Palet, Cristina|||0000-0002-7467-613X
Human hair is considered a ubiquitous waste product and its accumulation can cause environmental problems. Hence, the search for alternatives that take advantage of this waste as a new raw material is of interest, and contributes to the idea of the circular economy. In this study, chemically modified human hair was used as a low cost biosorbent for the removal of heavy metal ions from aqueous solutions. The effect of the contact time, the pH, and the biosorbent concentration on the biosorption process were investigated. Kinetic modeling indicated that the pseudo-second order kinetic equation fitted well with R.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A general covalent binding model between cytotoxic selenocompounds and albumin revealed by mass spectrometry and X-ray absorption spectroscopy

  • Zheng, Wenyi
  • He, Rui
  • Boada, Roberto|||0000-0003-4857-8402
  • Subirana, Maria Angels
  • Ginman, Tobias
  • Ottosson, Håkan
  • Valiente, Manuel|||0000-0003-0766-9922
  • Zhao, Ying
  • Hassan, Moustapha
Selenocompounds (SeCs) are promising therapeutic agents for a wide range of diseases including cancer. The treatment results are heterogeneous and dependent on both the chemical species and the concentration of SeCs. Moreover, the mechanisms of action are poorly revealed, which most probably is due to the detection methods where the quantification is based on the total selenium as an element. To understand the mechanisms underlying the heterogeneous cytotoxicity of SeCs and to determine their pharmacokinetics, we investigated selenium speciation of six SeCs representing different categories using liquid chromatography-mass spectrometry (LC-MS) and X-ray absorption spectroscopy (XAS) and the cytotoxicity using leukemic cells. SeCs cytotoxicity was correlated with albumin binding degree as revealed by LC-MS and XAS. Further analysis corroborated the covalent binding between selenol intermediates of SeCs and albumin thiols. On basis of the Se-S model, pharmacokinetic properties of four SeCs were for the first time profiled. In summary, we have shown that cytotoxic SeCs could spontaneously transform into selenol intermediates that immediately react with albumin thiols through Se-S bond. The heterogeneous albumin binding degree may predict the variability in cytotoxicity. The present knowledge will also guide further kinetic and mechanistic investigations in both experimental and clinical settings.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced arsenite removal by superparamagnetic iron oxide nanoparticles in-situ synthesized on a commercial cube-shape sponge, adsorption-oxidation mechanism

  • Lou, Xiang-Yang|||0000-0003-0241-6707
  • Boada, Roberto|||0000-0003-4857-8402
  • Simonelli, Laura|||0000-0001-5331-0633
  • Valiente, Manuel|||0000-0003-0766-9922
Hypothesis: The easy aggregation of superparamagnetic iron oxide nanoparticles (SPION) greatly reduces their adsorption performance for removing arsenic (As) from polluted water. We propose to exploit the porosity and good diffusion properties of a cube-shaped cellulose sponge for loading SPION to reduce the aggregation and to develop a composite adsorbent in the cm-scale that could be used for industrial applications. Experiments: SPION were in-situ synthesized by co-precipitation using a commercial cube-shaped sponge (MetalZorb®) as support. The morphology, iron-oxide phase, adsorption performance and thermodynamic parameters of the composite adsorbent were determined to better understand the adsorption process. X-ray absorption spectroscopy (XAS) was used to investigate the chemical state of the adsorbed As(III). Findings: The adsorption of the supported SPION outperforms the unsupported SPION (ca. 14 times higher adsorption capacity). The modelling of the adsorption isotherms and the kinetic curves indicated that chemisorption is controlling the adsorption process. The thermodynamic analysis shows that the adsorption retains the spontaneous and endothermic character of the unsupported SPION. The XAS results revealed an adsorption-oxidation mechanism in which the adsorbed As(III) was partially oxidized to less toxic As(V) by the hydroxyl free radical (•OH) generated from Fe(III) species and by the hydroxyl groups.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The power of weak ion-exchange resins assisted by amelogenin for natural remineralization of dental enamel, an in vitro study

  • Diez-García, Sandra|||0000-0002-1549-5427
  • Sánchez-Martín, María-Jesús|||0000-0003-1678-6055
  • Valiente, Manuel|||0000-0003-0766-9922
This study aims to develop an innovative dental product to remineralize dental enamel by a proper combination of ion-exchange resins as controlled release of mineral ions that form dental enamel, in the presence of amelogenin to guide the appropriate crystal growth. The novel product proposed consists of a combination of ion-exchange resins (weak acid and weak base) individually loaded with the remineralizing ions: Ca, PO and F, also including Zn in a minor amount as antibacterial, together with the protein amelogenin. Such cocktail provides onsite controlled release of the ions necessary for enamel remineralization due to the weak character of the resins and at the same time, a guiding tool for related crystal growth by the indicated protein. Amelogenin protein is involved in the structural development of natural enamel and takes a key role in controlling the crystal growth morphology and alignment at the enamel surface. Bovine teeth were treated by applying the resins and protein together with artificial saliva. Treated teeth were evaluated with nanoindentation, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The innovative material induces the dental remineralization creating a fluorapatite layer with a hardness equivalent to sound enamel, with the appropriate alignment of corresponding nanocrystals, being the fluorapatite more acid resistant than the original mineral. Our results suggest that the new product shows potential for promoting long-term remineralization leading to the inhibition of caries and protection of dental structures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Insights of microorganisms role in rice and rapeseed wastes as potential sorbents for metal removal

  • Shen, X.
  • Zhao, J.
  • Bonet-Garcia, N.
  • Villagrasa, Eduard|||0000-0003-1846-4244
  • Solé Cornellà, Antoni|||0000-0002-1151-319X
  • Liao, X.
  • Palet, Cristina|||0000-0002-7467-613X
Rice and rapeseed agricultural wastes, as nonliving biomass, are proposed for heavy metal remediation in polluted effluents (chromium, cadmium, copper and lead). The physicochemical characterization of these biomasses shows that the surface of both sorbents is negatively charged (zeta potential), the surface area of sorbents is 4.39 and 40.7 (Brunauer-Emmett-Teller), and the main functional groups are carboxylic and hydroxyl (attenuated total reflection Fourier-transform infrared spectroscopy). The main purpose of this work is to evaluate the insights of microorganisms associated with these nonliving biomasses in the removal of heavy metals from synthetic aqueous solutions, adjusted at pH 4.0 (as the best acidic condition for the sorption process). The isolates (Bacillus genus in rice and Escherichia, Micrococcus and Staphylococcus genus in rapeseed) remove heavy metals from mentioned solutions, mainly in consortia, with contribution percentage over than 80% of total metals. In addition, when they are present in biomass, they provide an additional metal removal effect, especially in rapeseed biomass system and with multiple heavy metals aqueous solutions: i.e. Cr(III) removal, at 4 mmol/L, increases from 70 to 100%. This knowledge makes possible the use of the nonliving biomasses with no need for any special pretreatment against the microorganisms, prior to their use as metal sorbents that implies their good feasibility for application from an economical point of view.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tooth whitening effects on dental enamel, oxidation or reduction? Comparison of physicochemical alterations in bovine enamel using Synchrotron-based Micro-FTIR

  • Babot Marquillas, Clara|||0000-0002-0274-0294
  • Sánchez-Martín, María-Jesús|||0000-0003-1678-6055
  • Amigo, Jose Manuel|||0000-0003-1319-1312
  • Yousef, Ibraheem|||0000-0001-7818-8611
  • Valido, Iris H.|||0000-0002-4037-1223
  • Boada, Roberto|||0000-0003-4857-8402
  • Valiente, Manuel|||0000-0003-0766-9922
Objectives: To compare the side effects of typical whitening treatments (by means of oxidation) compared to the new treatment developed by the authors through reduction. The aim is to provide information about the chemical interactions of the encapsulated reductant agent (metabisulfite, MBS) with the enamel structure compared with carbamide peroxide (CP) and to study their penetration in the hydroxyapatite (HAP) and the changes produced in the mineral and its hardness. Methods: Chemical imaging is performed by synchrotron-based micro Fourier transformed infrared spectroscopy (SR-µFTIR). Continuous Stiffness Measurements (CSM) were used to determine the depth reached by the treatments in order to delimitate the area of study. Results: The SR-µFTIR studies showed that MBS treatments softened the first 10 µm of enamel, as happens in the initial stages of tooth decay. Principal component analysis (PCA) showed that the main differences between treatments were found in the intensity of the ν PO peak related to tooth demineralization. CP and MBS promoted different changes in the HAP mineral, observed as opposite shifts of the peak: CP shortened the P-O bond while MBS seemed to elongate it. Moreover, MBS promoted the loss of carbonates while CP did not, which is probably related to the solution's pH. When comparing MBS and MBS Liposomes, it was observed how liposomes favoured the diffusion of MBS to inner layers, since the effects of MBS were observed in deeper enamel. Thus, the encapsulated MBS whitening effect is highly improved in terms of time when compared to MBS alone or CP. Significance: The obtained results indicated that using oxidizing (CP) or reducing (MBS) treatments, promote different HAP mineral changes, and that liposomes favour the diffusion of MBS into the enamel. It is the first time that synchrotron light is used to map the bovine incisor's enamel chemically, and to determine the effect of a whitening treatment in terms of chemical HAP modifications, and the extent in deep of these effects.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Combination of Two Synchrotron Radiation-Based Techniques and Chemometrics to Study an Enhanced Natural Remineralization of Enamel

  • Diez-García, Sandra|||0000-0002-1549-5427
  • Sánchez-Martín, María-Jesús|||0000-0003-1678-6055
  • Amigo, Jose Manuel|||0000-0003-1319-1312
  • Valiente, Manuel|||0000-0003-0766-9922
The limitations to assess dental enamel remineralization have been overcome by a methodology resulting from the appropriate combination of synchrotron radiation-based techniques on both, infrared microspectroscopy and micro X-ray diffraction, with the help of specific data mining. Since amelogenin plays a key role in modulating the mineralization of tooth enamel, we propose a controlled ion release for fluorapatite structural ions (Ca 2+, PO 3-, and F -, also including Zn 2+) by using weak acid and weak base ion-exchange resins in the presence of amelogenin to remineralize the surface of etched teeth. This combination provides the necessary ions for enamel remineralization and a guide for crystal growth due to the protein. Remineralized tooth samples were analyzed by applying the indicated methodology. The synchrotron data were treated using principal component analysis and multivariate curve resolution to analyze the mineral layer formed in the presence and absence of amelogenin. The remineralizing treatment created a fluorapatite layer free of carbonate impurities and with a similar orientation to that of the natural enamel thanks to amelogenin contribution.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Coffee Husk and Lignin Revalorization, modification with Ag Nanoparticles for Heavy Metals Removal and Antifungal Assays

  • Guevara-Bernal, Daniel Fernando|||0000-0002-7316-2567
  • Cáceres Ortíz, Marlon Yesid
  • Gutiérrez Cifuentes, Jorge Andrés
  • Bastos Arrieta, Julio|||0000-0002-8939-6253
  • Palet, Cristina|||0000-0002-7467-613X
  • Candela, Angélica María|||0000-0002-9674-6055
This study presents the use of the modified coffee husk and coffee lignin as sorbents in the heavy metal ions sorption of Pb(II), Cd(II), Cr(III), and Cu(II) in an aqueous solution. The modification of sorbents was carried out by the impregnation method, using silver nitrate (AgNO3) and sodium borohydride (NaBH4) as a nanoparticles' (NPs) precursor, and reducing agent, respectively. The obtained nanocomposite material was morphologically characterized by electron microscopy. In addition, an evaluation of metal ions' sorption, pseudo-first-order, and pseudo-second-order kinetics modeling was performed. Finally, antifungal activity was evaluated on different Candida species. Coffee and lignin modified with AgNPs increased the extraction capacity with the highest sorption for Pb ions with 2.56 mg/g and 1.44 mg/g, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Agro-Industrial Waste as Potential Heavy Metal Adsorbents and Subsequent Safe Disposal of Spent Adsorbents

  • Simón, Daiana
  • Palet, Cristina|||0000-0002-7467-613X
  • Costas, Agustín
  • Cristóbal, Adrián|||0000-0002-7623-1329
Water pollution is an environmental problem that affects the ecosystem and living beings. Adsorption is one of the best technologies for the removal of heavy metals. Since waste recovery is the basis of the Circular Economy, agro-industrial waste is emerging as low-cost adsorbents for these pollutants from wastewater. Residues of pine sawdust, sunflower seed hulls and corn residues mix were evaluated as adsorbents of synthetic aqueous solutions of Ni(II), Zn(II) and Cd(II). These residues were characterized to determine their structure and composition, and to understand the adsorption mechanism. Adsorption efficiencies and capacities for the adsorbents and adsorbates were determined and compared. From the obtained results, it is possible to affirm that all biomasses used are good alternatives to the synthetic materials, with adsorption efficiencies greater than 50%. The order of adsorption was Cd.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Decoupling the adsorption mechanisms of arsenate at molecular level on modified cube-shaped sponge loaded superparamagnetic iron oxide nanoparticles

  • Lou, Xiang-Yang|||0000-0003-0241-6707
  • Boada, Roberto|||0000-0003-4857-8402
  • Verdugo, Verónica|||0000-0003-3090-285X
  • Simonelli, Laura|||0000-0001-5331-0633
  • Pérez González, Gustavo|||0000-0001-9112-9042
  • Valiente, Manuel|||0000-0003-0766-9922
In this study, a commercial cube-shaped open-celled cellulose sponge adsorbent was modified by in-situ co-precipitation of superparamagnetic iron oxide nanoparticles (SPION) and used to remove As(V) from aqueous solutions. Fe K-edge X-ray absorption spectroscopy (XAS) and TEM identified maghemite as the main iron phase of the SPION nanoparticles with an average size 13 nm. Batch adsorption experiments at 800 mg/L showed a 63% increase of adsorption capacity when loading 2.6 wt.% mass fraction of SPION in the cube-sponge. Experimental determination of the adsorption thermodynamic parameters indicated that the As(V) adsorption on the composite material is a spontaneous and exothermic process. As K-edge XAS results confirmed that the adsorption enhancement on the composite can be attributed to the nanoparticles loaded. In addition, adsorbed As(V) did not get reduced to more toxic As(III) and formed a binuclear corner-sharing complex with SPION. The advantageous cube-shape of the sponge-loaded SPION composite together with its high affinity and good adsorption capacity for As(V), good regeneration capability and the enhanced-diffusion attributed to its open-celled structure make this adsorbent a good candidate for industrial applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Novel cannabinoid release system, encapsulation of a cannabidiol precursor into γ-cyclodextrin metal-organic frameworks

  • Rodriguez Martinez, Jorge
  • Sánchez-Martín, María-Jesús|||0000-0003-1678-6055
  • López Patarroyo, Oscar
  • Valiente, Manuel|||0000-0003-0766-9922
γ-Cyclodextrin-metal-organic frameworks (γ-CD-MOFs) are developed as a new promising and biocompatible material, which shows a great potential for drug delivery system (DDS) applications. γ-CD-MOFs were successfully synthesized using microwave-assisted technique from different potassium sources (KOH, KCl and KNO3). The encapsulation of olivetol (OLV) into these materials was investigated as an innovative model of DDS for cannabinoids. Loading of OLV in γ-CD-MOFs was performed by impregnation and co-crystallization methods. Scanning electron microscopy (SEM) and X-ray powder diffraction (XRPD) were employed to study the structural properties of γ-CD-MOF samples, showing the typical cubic crystals in case of KOH and trigonal morphologies in case of KCl and KNO3. Olivetol content was determined using UV-Vis spectrophotometry and its interaction with γ-CD-MOFs was investigated by Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy analysis (ATR-FTIR). OLV content was significantly higher when KCl or KNO3 were employed in combination with a cocrystallization method, while the drug encapsulation using KOH and the impregnation method was really poor. For the first time, γ-CD-MOFs loaded with cannabinoids were developed and they could be considered a novel strategy as DDS of these compounds.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecularly imprinted polymer for the removal of diclofenac from water, Synthesis and characterization

  • Samah, Nurlin Abu|||0000-0002-8504-2220
  • Sánchez-Martín, María-Jesús|||0000-0003-1678-6055
  • Sebastián, Rosa María|||0000-0001-5519-9131
  • Valiente, Manuel|||0000-0003-0766-9922
  • López-Mesas, Montserrat|||0000-0002-4470-0194
Contaminants of Emerging Concerns (CECs) have been introduced as one type of recalcitrant pollutant sources in water. In this study, the non-steroidal anti-inflammatory drug diclofenac (DCF) has been removed from water solutions using Molecularly Imprinted Polymer (MIP), synthetized via bulk polymerization with allylthiourea (AT) as the functional monomer and using DCF as template (MIP-DCF). DCF detection has been performed by UV spectrophotometer. From the kinetic study in batch mode, approximately 100% of removal is observed by using 10 mg of MIP-DCF, with an initial concentration of 5 mg/L of DCF at pH 7, within 3 min and agitated at 25 °C. In continuous flow mode study, using a cartridge pre-packed with 10 mg of MIP-DCF, a high adsorption capacity of 160 mg DCF/g MIP was obtained. To study the porosity of MIPs, scanning electron microscopy (SEM) has been used. In order to characterize the chemical interaction between monomer and template, the pre-polymerization mixture for MIP and DCF has also been studied by H NMR. One of the chemical shift observed has been related to the formation of a complex between amine protons of thiourea group of AT with carboxylic acid on DCF. In conclusion, the developed MIP works as a good adsorbent for DCF removal, and is selective to DCF in the presence of indomethacin and ibuprofen.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Outstanding performance of hierarchical alumina microspheres for boron removal in the presence of competing ions

  • Lou, Xiang-Yang|||0000-0003-0241-6707
  • Boada, Roberto|||0000-0003-4857-8402
  • Yohai del Cerro, Lucia|||0000-0003-0849-233X
  • Valiente, Manuel|||0000-0003-0766-9922
Developing efficient materials for the removal of boron from aqueous solutions is becoming an important task to overcome boron pollution. Herein, we present hierarchical alumina microspheres (HAM) as an outstanding adsorbent, synthesized via a microwave-assisted co-precipitation method. The microstructure, morphology, and textural characterization of the HAM particles carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) revealed hollow γ-Al2O3 particles with a porous dandelion-like shape and an average size of 1.5 μm. The analysis of the adsorption data indicated that the adsorption was homogeneous in a single layer and that chemical adsorption was the controlling step in the process. The adsorption capacity obtained at an initial concentration of 800 mg·L-1 was 51.60 mg·g-1, and the theoretically calculated maximum adsorption capacity using the Langmuir model was 138.50 mg·g-1, which outperforms previously reported adsorbents. The determination of thermodynamic parameters indicated that the adsorption is an exothermic and non-spontaneous process. The XPS spectra of HAM after adsorption indicated the formation of Al-O-B bonds. Of particular interest for industrial applications, the HAM adsorbent showed excellent selectivity for boron in the presence of competing cations or anions and at different ionic strengths. In addition, HAM maintained a high adsorption capacity after five consecutive adsorption/desorption cycles. These findings highlight the potential of HAM as a highly microporous material for boron removal in real industrial applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Direct and indirect selenium speciation in biofortified wheat, A tale of two techniques

  • Subirana, Maria Angels
  • Boada, Roberto|||0000-0003-4857-8402
  • Xiao, Tingting|||0000-0001-9818-8627
  • Llugany, Mercè|||0000-0002-9940-0383
  • Valiente, Manuel|||0000-0003-0766-9922
Wheat can be biofortified with different inorganic selenium (Se) forms, selenite or selenate. The choice of Se source influences the physiological response of the plant and the Se metabolites produced. We looked at selenium uptake, distribution and metabolization in wheat exposed to selenite, selenate and a 1:1 molar mixture of both to determine the impact of each treatment on the Se speciation in roots, shoots, and grains. To achieve a comprehensive quantification of the Se species, the complementarity of high-performance liquid chromatography coupled with inductively coupled plasma mass spectrometry and X-ray absorption spectroscopy was exploited. This approach allowed the identification of the six main selenium species: selenomethionine, selenocysteine, selenocystine, selenite, selenate, and elemental selenium. The three treatments resulted in similar total selenium concentration in grains, 90-150 mg Se kg -1, but produced different effects in the plant. Selenite enhanced root accumulation (66% of selenium) and induced the maximum toxicity, whereas selenate favored shoot translocation (46%). With the 1:1 mixture, selenium was distributed along the plant generating lower toxicity. Although all conditions resulted in.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents, A Review

  • Lou, Xiang-Yang|||0000-0003-0241-6707
  • Yohai del Cerro, Lucia|||0000-0003-0849-233X
  • Boada, Roberto|||0000-0003-4857-8402
  • Resina Gallego, Montserrat|||0000-0002-4122-0515
  • Han, Dong
  • Valiente, Manuel|||0000-0003-0766-9922
Increasing levels of boron in water exceeding acceptable thresholds have triggered concerns regarding environmental pollution and adverse health effects. In response, significant efforts are being made to develop new adsorbents for the removal of boron from contaminated water. Among the various materials proposed, inorganic adsorbents have emerged as promising materials due to their chemical, thermal, and mechanical stability. This review aims to comprehensively examine recent advances made in the development of inorganic adsorbents for the efficient removal of boron from water. Firstly, the adsorption performance of the most used adsorbents, such as magnesium, iron, aluminum, and individual and mixed oxides, are summarized. Subsequently, diverse functionalization methods aimed at enhancing boron adsorption capacity and selectivity are carefully analyzed. Lastly, challenges and future perspectives in this field are highlighted to guide the development of innovative high-performance adsorbents and adsorption systems, ultimately leading to a reduction in boron pollution.