Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Evaluation of low-cost geo-adsorbents for As(V) removal

  • Inchaurrondo, Natalia|||0000-0002-5398-634X
  • Di Luca, Carla|||0000-0002-0425-5508
  • Haure, Patricia
  • Žerjav, Gregor|||0000-0002-8934-8411
  • Pintar, Albin|||0000-0002-3198-2954
  • Palet, Cristina|||0000-0002-7467-613X
Four low-cost iron-bearing geo-adsorbents were tested for As(V) removal without pretreatment: Montanit300® (M), diatomite (D), pumice (P) and black sand (BS). The solids were carefully characterized by different analytical techniques (SEM-EDX, TPD-pyridine, N2 Physisorption, XRD and point of zero charge). The adsorption of As(V) was evaluated through isotherms and kinetic studies (bottled water matrix, pH0=8,25 g/L of solids), and experiments addressing pH effect (pH0=3.6,7.5,11) and the presence of interfering anions (Cl-, SO42-, NO3-, PO43-). Experimental results were fitted to the Freundlich and Langmuir sorption isotherms. Under the employed conditions, P showed negligible adsorption, M and D presented adsorption capacities around 0.02 mg/g and, in spite its lower surface area, BS displayed the highest value (0.045 mg/g), which relates to a higher density of Fe species, M and D samples were easily regenerated (80%-100% desorption) through a basic treatment (0.01 M NaOH) and presented fast adsorption kinetics (1 h for D and seconds for M). BS showed a slow adsorption kinetic (24 h) and poor regeneration (only 50% desorption). Sample M (natural zeolite) resulted a promising option due to its remarkably fast adsorption kinetic, easy regeneration and adsorption capacity suitable for systems with relatively low As concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis and adsorption behavior of mesoporous alumina and Fe-doped alumina for the removal of dominant arsenic species in contaminated waters

  • Inchaurrondo, Natalia|||0000-0002-5398-634X
  • Di Luca, Carla|||0000-0002-0425-5508
  • Mori, Fernanda
  • Pintar, Albin|||0000-0002-3198-2954
  • Zerjav, Gregor
  • Valiente, Manuel|||0000-0003-0766-9922
  • Palet, Cristina|||0000-0002-7467-613X
Ordered mesoporous Al2O3 and Fe-Al2O3 materials were synthesized at room temperature by an easy and environmentally friendly self-assembly sol-gel route, to be tested for arsenic removal. Solid samples were thoroughly characterized by several techniques. Synthetized and commercial alumina samples were evaluated as adsorbents for the removal of dominant arsenic species under a wide pH range (3.6-11.5). The mesoporous alumina showed higher adsorption capacity (90 mg/g As(V), pHeq 4) than commercial alumina (54 mg/g As(V), pHeq 4), due to its amorphous structure, uniform accessible mesopores and higher surface acidity. The Fe bearing material exhibited strong As affinity. As(III) adsorption resulted much lower than for arsenate (maximum uptake of 16 mg/g, at pH 8), since As(III)-adsorbent interaction is only based on weak Van der Waals force. Arsenic isotherms adjusted well to the Freundlich model and more accurately to the three parameters Sip's model. The kinetics results fitted the Elovich model. As pH increased, adsorption capacity decreased due to the reduction of electrostatic interactions. Under alkaline conditions arsenic desorption was achieved, although the stability of the material was compromised. The presence of several interfering ions was evaluated. Phosphate ions showed the highest interference. The use of a tap water matrix increased As(V) adsorption, encouraging the use of these materials in the treatment of real polluted waters.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Agro-Industrial Waste as Potential Heavy Metal Adsorbents and Subsequent Safe Disposal of Spent Adsorbents

  • Simón, Daiana
  • Palet, Cristina|||0000-0002-7467-613X
  • Costas, Agustín
  • Cristóbal, Adrián|||0000-0002-7623-1329
Water pollution is an environmental problem that affects the ecosystem and living beings. Adsorption is one of the best technologies for the removal of heavy metals. Since waste recovery is the basis of the Circular Economy, agro-industrial waste is emerging as low-cost adsorbents for these pollutants from wastewater. Residues of pine sawdust, sunflower seed hulls and corn residues mix were evaluated as adsorbents of synthetic aqueous solutions of Ni(II), Zn(II) and Cd(II). These residues were characterized to determine their structure and composition, and to understand the adsorption mechanism. Adsorption efficiencies and capacities for the adsorbents and adsorbates were determined and compared. From the obtained results, it is possible to affirm that all biomasses used are good alternatives to the synthetic materials, with adsorption efficiencies greater than 50%. The order of adsorption was Cd.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cadmium Removal by Adsorption on Biochars Derived from Wood Industry and Craft Beer Production Wastes

  • Simón, Daiana
  • Palet, Cristina|||0000-0002-7467-613X
  • Cristóbal, Adrián|||0000-0002-7623-1329
Cadmium pollution is a serious environmental issue that has an impact on both the ecosystem and human health. As a result, its removal from water is essential. Agro-industrial wastes are suggested as a sustainable adsorbent option, as they are among the most readily available renewable sources worldwide. Biochar is a carbonized biomass that has been shown to be a viable and novel adsorbent. This article compares the results of cadmium adsorption on biochars derived from wood industry and craft beer production wastes. Biochars were characterized before and after adsorption. Batch adsorption results of 0.18 mmol/L Cd(II) concentration solutions indicated adsorption percentages (A%) of 99.7% and 92.2% for sawdust biochar and barley biochar, respectively. For this cadmium concentration, the sawdust biochar presented an adsorption capacity (q) of 0.0172 mmol/L, while the barley biochar presented a value of 0.0159 mmol/L. The influence of initial Cd(II) concentration on single and multimetal solutions was studied, and a decrease in Cd(II) adsorption on sawdust biochar was observed in the presence of Ni(II) and Zn(II). The Freundlich isotherm model was found to be the best fit to the data for Cd(II) adsorption isotherms on both biochars. According to the results of this article, sawdust biochar has the best performance as an adsorbent and can be safely disposed of in building bricks at the end of its useful life.