Skip to main content

MATERIALES COMPUESTOS MAS SOSTENIBLES FABRICADOS A PARTIR DE LA VALORIZACION DE RESIDUOS DE PLUMA DE AVE

MAT2015-65392-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Valorization of keratin biofibers for removing heavy metals from aqueous solutions

  • Zhang, Helan
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
  • López-Mesas, Montserrat|||0000-0002-4470-0194
  • Palet, Cristina|||0000-0002-7467-613X
Four common waste keratin biofibers (human hair, dog hair, chicken feathers, and degreased wool) have been used as biosorbents for the removal of heavy metal ions from aqueous solutions. Different parameters of the biosorption processes were optimized in batch systems. For multiple-metal systems, consisting of a mixture of eight metal ions [Cr(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II)], the total metal biosorption increased in the order: degreased wool.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Valorization of keratin biofibers for removing heavy metals from aqueous solutions

  • Zhang, Helan
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
  • López Mesas, Montserrat
  • Palet, Cristina
Four common waste keratin biofibers (human hair, dog hair, chicken feathers, and degreased wool) have been used as biosorbents for the removal of heavy metal ions from aqueous solutions. Different parameters of the biosorption processes were optimized in batch systems. For multiple-metal systems, consisting of a mixture of eight metal ions [Cr(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II)], the total metal biosorption increased in the order: degreased wool¿>¿chicken feathers¿>¿human hair¿>¿dog hair. From the kinetic models tested, the pseudo-second-order model provided better results. Furthermore, biosorption isotherms of Pb(II) with the different keratin biofibers fitted the Langmuir model. Surface morphology of the biosorbents were analyzed before and after the sorption using Fourier transform infrared spectroscopy and scanning electron microscopy. The keratin biofibers tested are potentially good sorbents of metal ions, with degreased wool and chicken feathers being the more efficient ones
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Towards circular economy by the valorization of different waste subproducts through their incorporation in composite materials: ground tire rubber and chicken feathers

  • Colom Fajula, Xavier|||0000-0003-3511-852X
  • Cañavate Ávila, Francisco Javier|||0000-0002-1502-6962
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
Incorporation of residua into polymeric composites can be a successful approach to creating materials suitable for specific applications promoting a circular economy approach. Elastomeric (Ground Tire Rubber or GTR) and biogenic (chicken feathers or CFs) wastes were used to prepare polymeric composites in order to evaluate the tensile, acoustic and structural differences between both reinforcements. High-density polyethylene (HDPE), polypropylene (PP) and ethylene vinyl acetate (EVA) polymeric matrices were used. EVA matrix defines better compatibility with both reinforcement materials (GTR and CFs) than polyolefin matrices (HDPE and PP) as it has been corroborated by Fourier transform infrared spectroscopy (FTIR), termogravimetric analysis (TGA) and scanning electron microscopy (SEM). In addition, composites reinforced with GTR showed better acoustic properties than composites reinforced with CFs, due to the morphology of the reinforcing particles
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

CONPLUMAS: valorización de residuos biogénicos fibrosos para la obtención de nuevos materiales

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Environmental impact assessment of sound absorbing nonwovens based on chicken feathers waste

  • Casadesús Fusté, Marta|||0000-0003-3131-4670
  • Álvarez del Castillo, María Dolores|||0000-0001-9956-0523
  • Garrido Soriano, Núria|||0000-0002-3606-3199
  • Molins Duran, Gemma|||0000-0002-4405-6327
  • Macanás de Benito, Jorge|||0000-0003-2346-3297
  • Colom Fajula, Xavier|||0000-0003-3511-852X
  • Cañavate Ávila, Francisco Javier|||0000-0002-1502-6962
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
Chicken feathers (CFs) are currently a biogenic solid waste generated on a large scale and around the world. Its valorization could provide a great opportunity to manufacture environmentally friendly materials and increase the profit of poultry processors. The aim of this study was to fabricate sound absorbing nonwoven materials using CFs wastes to evaluate both the environmental impact of their fabrication processes using Life Cycle Assessment (LCA) methodology and the acoustic performance and to compare the results with a conventional insulating material such as stone wool (SW). The study showed that it was possible to fabricate CFs-wool nonwovens incorporating up to 50% w/w of CFs. The new material showed similar acoustic properties to those of SW, even behaving better for frequencies below 2200¿Hz. LCA study showed that the environmental impacts decrease when the amount of CFs increases in those nonwoven materials containing CFs-wool, except for abiotic depletion and eutrophication impact categories. However, despite the synthetic nature of the SW, SW only presented worse environmental performance than the CFs based nonwoven materials for few impact categories (depletion of abiotic resources, human toxicity and photo-oxidant formation) due to the negative contribution caused by the incorporation of wool (W) into the nonwoven materials
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Environmental impact assessment of Polylactide(PLA)/chicken feathers biocomposite materials

  • Molins Duran, Gemma|||0000-0002-4405-6327
  • Álvarez del Castillo, María Dolores|||0000-0001-9956-0523
  • Garrido Soriano, Núria|||0000-0002-3606-3199
  • Macanás de Benito, Jorge|||0000-0003-2346-3297
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
The aim of this study is to analyse the environmental impacts (EIs) of the process of preparation of new biocomposite materials obtained from polylactide (PLA) and chicken feathers (CFs). Two CFs stabilization methods and different percentages of CFs have been studied. The EIs of these new composites were compared to the impact of virgin PLA. Cradle-to-gate life cycle inventories were assessed for 0–35% v/v of CFs in a CFs/PLA biocomposite. Two CFs stabilization processes, autoclave and surfactant, were tested and compared with the aim to prioritize one of them from the environmental point of view. A composite plate of 184¿×¿184¿×¿2.2 mm3 was defined as the functional unit. Autoclave stabilization process exhibited lower environmental impact compared with surfactant stabilization process mainly due to both the lower requirements of electricity and water and the reduced pollution loads of the generated wastewater. Thus, the autoclave process was selected as the standard method when comparing the EIs of the proposed CFs/PLA biocomposites. In this sense, the addition of CFs to PLA matrix proportionally reduces all the EIs compared to pure PLA due to the replacement of PLA with CFs. This behaviour can be explained because the PLA production accounts for the 99% of the impact of the biocomposite. Consequently, CFs conveniently stabilized might be an alternative raw material to prepare CFs/PLA biocomposites with less environmental impact compared to pure PLA
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Aprovechamiento de residuos queratínicos para la sorción de cobre de soluciones acuosas, Use of keratinous residues for copper sorption in aqueous solution, Aprofitament de residus queratínics per a la sorció de coure en solucions aquoses

  • Casadesús Fusté, Marta|||0000-0003-3131-4670
  • Álvarez del Castillo, María Dolores|||0000-0001-9956-0523
  • Macanás de Benito, Jorge|||0000-0003-2346-3297
  • Colom Fajula, Xavier|||0000-0003-3511-852X
  • Cañavate Ávila, Francisco Javier|||0000-0002-1502-6962
  • Garrido Soriano, Núria|||0000-0002-3606-3199
  • Molins Duran, Gemma|||0000-0002-4405-6327
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
La industria avícola mundial genera una gran cantidad de residuos que en la actualidad son mayoritariamente desechados. Entre ellos, las plumas (CFs), estructuras queratínicas que presentan grupos funcionales y otras propiedades que las hacen adecuadas para su utilización como sorbentes de metales en aguas contaminadas. Se estudió la sorción de Cu2+ utilizando CFs, comparando los resultados con los obtenidos para la bentonita comercial (BNT), en experimentos a pH controlado y con muestra real. Las cinéticas indican que, para concentraciones bajas de Cu2+ (0,2 mM), la sorción es mayor y más rápida para las CFs (94 2 %) que para la BNT (67 %), mientras que para concentraciones altas de metal (6 mM), la BNT mostró mayor capacidad de sorción (87 %) que las CFs (15 %). Las cinéticas se ajustaron a un modelo de pseudo-segundo orden. El modelo de Langmuir describe la sorción para las CFs, mientras que el modelo de Nernst es el que mejor se ajusta para la BNT, ya que no se aprecia saturación. La caracterización de los materiales mediante técnicas de espectroscopia infrarroja y termogravimetría antes y después del ensayo demuestra que no se producen cambios significativos en la estructura de los sorbentes, lo que permitiría su reutilización
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effect of chemical treatments and additives on properties of chicken feathers thermoplastic biocomposites

  • Casadesús Fusté, Marta|||0000-0003-3131-4670
  • Macanás de Benito, Jorge|||0000-0003-2346-3297
  • Colom Fajula, Xavier|||0000-0003-3511-852X
  • Cañavate Ávila, Francisco Javier|||0000-0002-1502-6962
  • Álvarez del Castillo, María Dolores|||0000-0001-9956-0523
  • Garrido Soriano, Núria|||0000-0002-3606-3199
  • Molins Duran, Gemma|||0000-0002-4405-6327
  • Carrillo Navarrete, Fernando|||0000-0002-7357-9143
The valorization of chicken feathers (CFs) waste was researched in this work through the preparation of composites using ground chicken feathers as a filler (20 % v/v) and polypropylene (PP) or low-density polyethylene (LDPE) matrices. In order to improve the compatibility between CFs and the matrixes two different strategies were followed. First, by the chemical modification of the CFs by either acetylation or silanization and, second, by the addition of adhesion promoters like maleated polypropylene (MAPP) and maleatead polyethylene (MAPE). The effect of those treatments on the physical, mechanical and structural properties of the thermoplastic-CFs biocomposites, which are mainly related to the fibre–matrix compatibility, was analyzed. Results show that the addition of 20 % (vol/vol) of unmodified CFs to the thermoplastic matrices results in a significant decrease of the tensile strength associated to a weak interfacial adhesion was assessed by SEM. However, when the adhesion promoters were added to the mixture, a significant increase in the tensile strength was noticed, particularly when the composites were obtained by a process at 180 °C. On the contrary, acetylation and silane treatments of the CFs did not result in any practical improvement of the macroscopic properties of the biocomposites
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Environmental impact assessment of sound absorbing nonwovens based on chicken feathers waste

  • Casadesús Fusté, Marta
  • Álvarez del Castillo, María Dolores
  • Garrido Soriano, Núria
  • Molins Duran, Gemma
  • Macanás de Benito, Jorge
  • Colom Fajula, Xavier
  • Cañavate Ávila, Francisco Javier
  • Carrillo Navarrete, Fernando
Chicken feathers (CFs) are currently a biogenic solid waste generated on a large scale and around the world. Its valorization could provide a great opportunity to manufacture environmentally friendly materials and increase the profit of poultry processors. The aim of this study was to fabricate sound absorbing nonwoven materials using CFs wastes to evaluate both the environmental impact of their fabrication processes using Life Cycle Assessment (LCA) methodology and the acoustic performance and to compare the results with a conventional insulating material such as stone wool (SW). The study showed that it was possible to fabricate CFs-wool nonwovens incorporating up to 50% w/w of CFs. The new material showed similar acoustic properties to those of SW, even behaving better for frequencies below 2200¿Hz. LCA study showed that the environmental impacts decrease when the amount of CFs increases in those nonwoven materials containing CFs-wool, except for abiotic depletion and eutrophication impact categories. However, despite the synthetic nature of the SW, SW only presented worse environmental performance than the CFs based nonwoven materials for few impact categories (depletion of abiotic resources, human toxicity and photo-oxidant formation) due to the negative contribution caused by the incorporation of wool (W) into the nonwoven materials, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Towards circular economy by the valorization of different waste subproducts through their incorporation in composite materials: ground tire rubber and chicken feathers

  • Colom Fajula, Xavier
  • Cañavate Ávila, Francisco Javier
  • Carrillo Navarrete, Fernando
Incorporation of residua into polymeric composites can be a successful approach to creating materials suitable for specific applications promoting a circular economy approach. Elastomeric (Ground Tire Rubber or GTR) and biogenic (chicken feathers or CFs) wastes were used to prepare polymeric composites in order to evaluate the tensile, acoustic and structural differences between both reinforcements. High-density polyethylene (HDPE), polypropylene (PP) and ethylene vinyl acetate (EVA) polymeric matrices were used. EVA matrix defines better compatibility with both reinforcement materials (GTR and CFs) than polyolefin matrices (HDPE and PP) as it has been corroborated by Fourier transform infrared spectroscopy (FTIR), termogravimetric analysis (TGA) and scanning electron microscopy (SEM). In addition, composites reinforced with GTR showed better acoustic properties than composites reinforced with CFs, due to the morphology of the reinforcing particles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Environmental impact of chicken feathers based polypropylene composites developed for automotive and stationary applications and comparison with glass-fibre analogues

  • Álvarez del Castillo, María Dolores
  • Garrido Soriano, Núria
  • Casadesús Fusté, Marta
  • Macanás de Benito, Jorge
  • Molins Duran, Gemma
  • Carrillo Navarrete, Fernando
In last decades, there has been an interest in using biogenic wastes and by-products as fillers or reinforcements to produce polymer composites. Hence, new composites materials based on a blend of biogenic chicken feathers (CFs) and polypropylene (PP) are proposed in this work and compared, from the environmental point of view, with currently used materials as neat PP and PP reinforced with glass-fibres (PP-GF). A Cradle-to-Grave Life Cycle Assessment (LCA) was performed in order to compare the environmental impact of these three materials when being used either for automotive or stationary applications. The mechanical properties of each material were taken into account to calculate the equivalent mass of each industrial application and the use phase and end of life (EoL) were included in the LCA study. The results showed that, for automotive applications and for all the materials studied (PP-GF, PP-CFs and PP) the use phase has a great contribution to the environmental impact categories considered, proving that the new developed material based on CFs (PP-CFs) would be appropriate for stationary applications but not for mobile applications as automotive ones. In addition, the EoL scenario considered, i.e. incineration with energy recovery, has proven to provide extra environmental credits, Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was funded by the Spanish Ministerio de Economía y Competitividad. Project ref. MAT2015-65392-C2-1-R (MINECO/FEDER), Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of chemical treatments and additives on properties of chicken feathers thermoplastic biocomposites

  • Casadesús Fusté, Marta
  • Macanás de Benito, Jorge
  • Colom Fajula, Xavier
  • Cañavate Ávila, Francisco Javier
  • Álvarez del Castillo, María Dolores
  • Garrido Soriano, Núria
  • Molins Duran, Gemma
  • Carrillo Navarrete, Fernando
The valorization of chicken feathers (CFs) waste was researched in this work through the preparation of composites using ground chicken feathers as a filler (20 % v/v) and polypropylene (PP) or low-density polyethylene (LDPE) matrices. In order to improve the compatibility between CFs and the matrixes two different strategies were followed. First, by the chemical modification of the CFs by either acetylation or silanization and, second, by the addition of adhesion promoters like maleated polypropylene (MAPP) and maleatead polyethylene (MAPE). The effect of those treatments on the physical, mechanical and structural properties of the thermoplastic-CFs biocomposites, which are mainly related to the fibre–matrix compatibility, was analyzed. Results show that the addition of 20 % (vol/vol) of unmodified CFs to the thermoplastic matrices results in a significant decrease of the tensile strength associated to a weak interfacial adhesion was assessed by SEM. However, when the adhesion promoters were added to the mixture, a significant increase in the tensile strength was noticed, particularly when the composites were obtained by a process at 180 °C. On the contrary, acetylation and silane treatments of the CFs did not result in any practical improvement of the macroscopic properties of the biocomposites, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Environmental impact assessment of Polylactide(PLA)/chicken feathers biocomposite materials

  • Molins Duran, Gemma
  • Álvarez del Castillo, María Dolores
  • Garrido Soriano, Núria
  • Macanás de Benito, Jorge
  • Carrillo Navarrete, Fernando
The aim of this study is to analyse the environmental impacts (EIs) of the process of preparation of new biocomposite materials obtained from polylactide (PLA) and chicken feathers (CFs). Two CFs stabilization methods and different percentages of CFs have been studied. The EIs of these new composites were compared to the impact of virgin PLA. Cradle-to-gate life cycle inventories were assessed for 0–35% v/v of CFs in a CFs/PLA biocomposite. Two CFs stabilization processes, autoclave and surfactant, were tested and compared with the aim to prioritize one of them from the environmental point of view. A composite plate of 184¿×¿184¿×¿2.2 mm3 was defined as the functional unit. Autoclave stabilization process exhibited lower environmental impact compared with surfactant stabilization process mainly due to both the lower requirements of electricity and water and the reduced pollution loads of the generated wastewater. Thus, the autoclave process was selected as the standard method when comparing the EIs of the proposed CFs/PLA biocomposites. In this sense, the addition of CFs to PLA matrix proportionally reduces all the EIs compared to pure PLA due to the replacement of PLA with CFs. This behaviour can be explained because the PLA production accounts for the 99% of the impact of the biocomposite. Consequently, CFs conveniently stabilized might be an alternative raw material to prepare CFs/PLA biocomposites with less environmental impact compared to pure PLA, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Aprovechamiento de residuos queratínicos para la sorción de cobre de soluciones acuosas, Use of keratinous residues for copper sorption in aqueous solution, Aprofitament de residus queratínics per a la sorció de coure en solucions aquoses

  • Casadesús Fusté, Marta
  • Álvarez del Castillo, María Dolores
  • Macanás de Benito, Jorge
  • Colom Fajula, Xavier
  • Cañavate Ávila, Francisco Javier
  • Garrido Soriano, Núria
  • Molins Duran, Gemma
  • Carrillo Navarrete, Fernando
La industria avícola mundial genera una gran cantidad de residuos que en la actualidad son mayoritariamente desechados. Entre ellos, las plumas (CFs), estructuras queratínicas que presentan grupos funcionales y otras propiedades que las hacen adecuadas para su utilización como sorbentes de metales en aguas contaminadas. Se estudió la sorción de Cu2+ utilizando CFs, comparando los resultados con los obtenidos para la bentonita comercial (BNT), en experimentos a pH controlado y con muestra real. Las cinéticas indican que, para concentraciones bajas de Cu2+ (0,2 mM), la sorción es mayor y más rápida para las CFs (94 2 %) que para la BNT (67 %), mientras que para concentraciones altas de metal (6 mM), la BNT mostró mayor capacidad de sorción (87 %) que las CFs (15 %). Las cinéticas se ajustaron a un modelo de pseudo-segundo orden. El modelo de Langmuir describe la sorción para las CFs, mientras que el modelo de Nernst es el que mejor se ajusta para la BNT, ya que no se aprecia saturación. La caracterización de los materiales mediante técnicas de espectroscopia infrarroja y termogravimetría antes y después del ensayo demuestra que no se producen cambios significativos en la estructura de los sorbentes, lo que permitiría su reutilización, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

CONPLUMAS: valorización de residuos biogénicos fibrosos para la obtención de nuevos materiales

Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Valorization of keratin biofibers for removing heavy metals from aqueous solutions

  • Zhang, Helan
  • Carrillo Navarrete, Fernando
  • López Mesas, Montserrat
  • Palet, Cristina
Four common waste keratin biofibers (human hair, dog hair, chicken feathers, and degreased wool) have been used as biosorbents for the removal of heavy metal ions from aqueous solutions. Different parameters of the biosorption processes were optimized in batch systems. For multiple-metal systems, consisting of a mixture of eight metal ions [Cr(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II)], the total metal biosorption increased in the order: degreased wool¿>¿chicken feathers¿>¿human hair¿>¿dog hair. From the kinetic models tested, the pseudo-second-order model provided better results. Furthermore, biosorption isotherms of Pb(II) with the different keratin biofibers fitted the Langmuir model. Surface morphology of the biosorbents were analyzed before and after the sorption using Fourier transform infrared spectroscopy and scanning electron microscopy. The keratin biofibers tested are potentially good sorbents of metal ions, with degreased wool and chicken feathers being the more efficient ones, Postprint (author's final draft)