Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Band Alignment and Photoresponse of LaFe O3 -Based Heterojunctions

  • Sheng, Yunwei|||0000-0001-8173-0483
  • Mirjolet, Mathieu|||0000-0002-8471-3184
  • Villa Navas, Mario|||0000-0003-2949-5628
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Santiso, José|||0000-0003-4274-2101
  • Klein, Andreas
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Fontcuberta, Josep|||0000-0002-7955-2320
Epitaxial LaFeO3 (LFO)-based photocells, of different thicknesses (50-200 nm) have been grown on cubic LSAT (001) [(LaAlO3)0.3(Sr2TaAlO6)0.7] single-crystal substrates, using a La2/3Sr1/3MnO3 (LSMO) bottom electrode and different top electrodes [Pt,Ba0.95La0.05SnO3 (BLSO)], to determine their photoresponse. The measured short-circuit photocurrent first increases with LFO thickness and then decreases, and it is larger or smaller, when Pt or BLSO electrodes are used, respectively. The corresponding open-circuit voltage displays the opposite trend, being smaller or larger for Pt and BLSO, respectively, which is in excellent agreement with the electronic band alignments determined by x-ray photoelectron spectroscopy and also consistent with the rectifying character of the dark current-voltage data. It turns out that the films display a complex microstructure containing different variants, strained and relaxed, of the orthorhombic LaFeO3, that evolves with film thickness and entails the presence of strain gradients and, possibly, flexoelectric fields. We discuss these data and propose that the unavoidable grain boundaries between differently textured LaFeO3 crystallites play a significant role on the observed responsivity (2.6 × 10-4 A W-1), found to be larger than in related LFO-based structures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanoscale Polarization-Dependent Young's Modulus of Ferroelectric BaTiO3 Single Crystals

  • Checa, Marti|||0000-0003-2607-6866
  • Stefani, Christina|||0000-0002-8818-075X
  • Kelley, Kyle|||0000-0002-7688-0484
  • Balke, Nina|||0000-0001-5865-5892
  • Collins, Liam
  • Catalan, Gustau|||0000-0003-0214-4828
  • Jesse, Stephen
  • Domingo Marimon, Neus|||0000-0002-5229-6638
Flexoelectric fields produced by strong strain gradients at the nanoscale couple to ferroelectric polarization, promoting changes in the mechanical properties of ferroelectric materials as a function of the direction of the ferroelectric polarization. In this work, we calculate the asymmetry in the Young's modulus found in oppositely polarized out-of-plane domains of BaTiO single crystals by means of contact resonance AFM, and we evaluate its impact on the electromechanical response as measured by piezoresponse force microscopy, both using band excitation modes. We analyze the electromechanical response of the different BaTiO domains using k-means to build up their mean elastic and electromechanical features and quantify the flexoelectrically induced modulation of the Young's modulus. Finally, we discuss the use of contact Kelvin probe force microscope measurements to decouple electrostatic artifacts from purely piezoelectric ones when flexoelectric coupling appears.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Converse flexoelectricity yields large piezoresponse force microscopy signals in non-piezoelectric materials

  • Abdollahi, Amir|||0000-0003-0363-4984
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Arias, Irene|||0000-0002-6761-3499
  • Catalan, Gustau|||0000-0003-0214-4828
Converse flexoelectricity is a mechanical stress induced by an electric polarization gradient. It can appear in any material, irrespective of symmetry, whenever there is an inhomogeneous electric field distribution. This situation invariably happens in piezoresponse force microscopy (PFM), which is a technique whereby a voltage is delivered to the tip of an atomic force microscope in order to stimulate and probe piezoelectricity at the nanoscale. While PFM is the premier technique for studying ferroelectricity and piezoelectricity at the nanoscale, here we show, theoretically and experimentally, that large effective piezoelectric coefficients can be measured in non-piezoelectric dielectrics due to converse flexoelectricity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Periodicity-doubling cascades, direct observation in ferroelastic materials

  • Everhardt, Arnoud S.|||0000-0002-6690-143X
  • Damerio, Silvia
  • Zorn, Jacob A.
  • Zhou, Silang
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Catalan, Gustau|||0000-0003-0214-4828
  • Salje, Ekhard K.  H.
  • Chen, Long-Qing
  • Noheda, Beatriz|||0000-0001-8456-2286
Very sensitive responses to external forces are found near phase transitions. However, transition dynamics and preequilibrium phenomena are difficult to detect and control. We have observed that the equilibrium domain structure following a phase transition in ferroelectric and ferroelastic BaTiO3 is attained by halving of the domain periodicity multiple times. The process is reversible, with periodicity doubling as temperature is increased. This observation is reminiscent of the period-doubling cascades generally observed during bifurcation phenomena, and, thus, it conforms to the "spatial chaos" regime earlier proposed by Jensen and Bak [Phys. Scr. T 9, 64 (1985)PHSTER0281-184710.1088/0031-8949/1985/T9/009] for systems with competing spatial modulations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Signal enhancement on gold nanoparticle-based lateral flow tests using cellulose nanofibers

  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Stefani, Christina|||0000-0002-8818-075X
  • González Tovar, Israel|||0000-0002-3031-4516
  • De La Escosura-Muñiz, Alfredo|||0000-0002-9600-0253
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Mutjé, Pere|||0000-0001-8211-4949
  • Merkoçi, Arben|||0000-0003-2486-8085
Lateral flow paper-based biosensors merge as powerful tools in point-of-care diagnostics since they are cheap, portable, robust, selective, fast and easy to use. However, the sensitivity of this type of biosensors is not always as high as required, often not permitting a clear quantification. To improve the colorimetric response of standard lateral flow strips (LFs), we have applied a new enhancement strategy that increases the sensitivity of LFs based on the use of cellulose nanofibers (CNF). CNF penetrate inside the pores of LFs nitrocellulose paper, compacting the pore size only in the test line, particularly near the surface of the strip. This modification retains the bioreceptors (antibodies) close to the surface of the strips, and thus further increasing the density of selectively attached gold nanoparticles (AuNPs) in the top part of the membrane, in the test line area, only when the sample is positive. This effect boosts in average a 36.6% the sensitivity of the LFs. The optical measurements of the LFs were carried out with a mobile phone camera whose imaging resolution was improved by attaching microscopic lens on the camera objective. The characterization of CNF into paper and their effect was analyzed using atomic force microscope (AFM) and scanning electron microscope (SEM) imaging techniques.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Giant bulk photovoltaic effect in solar cell architectures with ultra-wide bandgap Ga2O3 transparent conducting electrodes

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Chikoidze, Ekaterine|||0000-0002-6566-4639
  • Dumont, Yves|||0000-0002-0739-428X
  • Jennings, M. R.
  • Russell, Stephen A. O.
  • Vales Castro, Pablo|||0000-0001-9181-1789
  • Catalan, Gustau|||0000-0003-0214-4828
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Ton-That, C.
  • Teherani, Féréchteh Hosseini
  • Sandana, Vinod E.
  • Bove, Philippe
  • Rogers, David J.
The use of ultra-wide bandgap transparent conducting beta gallium oxide (β-GaO) thin films as electrodes in ferroelectric solar cells is reported. In a new material structure for energy applications, we report a solar cell structure (a light absorber sandwiched in between two electrodes - one of them - transparent) which is not constrained by the Shockley-Queisser limit for open-circuit voltage (V) under typical indoor light. The solar blindness of the electrode enables a record-breaking bulk photovoltaic effect (BPE) with white light illumination (general use indoor light). This work opens up the perspective of ferroelectric photovoltaics which are not subject to the Shockley-Queisser limit by bringing into scene solar-blind conducting oxides.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Investigation of The Cellular Response to Bone Fractures, Evidence for Flexoelectricity

  • Núñez Toldrà, Raquel
  • Vásquez Sancho, Fabián|||0000-0001-8814-2676
  • Barroca, Nathalie
  • Catalan, Gustau|||0000-0003-0214-4828
The recent discovery of bone flexoelectricity (strain-gradient-induced electrical polarization) suggests that flexoelectricity could have physiological effects in bones, and specifically near bone fractures, where flexoelectricity is theoretically highest. Here, we report a cytological study of the interaction between crack stress and bone cells. We have cultured MC3T3-E1 mouse osteoblastic cells in biomimetic microcracked hydroxyapatite substrates, differentiated into osteocytes and applied a strain gradient to the samples. The results show a strong apoptotic cellular response, whereby mechanical stimulation causes those cells near the crack to die, as indicated by live-dead and caspase staining. In addition, analysis two weeks post-stimulation shows increased cell attachment and mineralization around microcracks and a higher expression of osteocalcin -an osteogenic protein known to be promoted by physical exercise. The results are consistent with flexoelectricity playing at least two different roles in bone remodelling: apoptotic trigger of the repair protocol, and electro-stimulant of the bone-building activity of osteoblasts.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photoflexoelectric effect in halide perovskites

  • Shu, Longlong|||0000-0002-7121-1652
  • Ke, Shanming|||0000-0003-3204-1416
  • Fei, Linfeng|||0000-0001-7329-0019
  • Huang, Wenbin
  • Wang, Zhiguo|||0000-0001-9409-1334
  • Gong, Jinhui
  • Jiang, Xiaoning
  • Wang, Li
  • Li, Fei|||0000-0002-4572-0322
  • Lei, Shuijin
  • Rao, Zhenggang
  • Zhou, Yangbo
  • Zheng, Ren-Kui
  • Yao, Xi
  • Wang, Yu
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Catalan, Gustau|||0000-0003-0214-4828
Harvesting environmental energy to generate electricity is a key scientific and technological endeavour of our time. Photovoltaic conversion and electromechanical transduction are two common energy-harvesting mechanisms based on, respectively, semiconducting junctions and piezoelectric insulators. However, the different material families on which these transduction phenomena are based complicate their integration into single devices. Here we demonstrate that halide perovskites, a family of highly efficient photovoltaic materials, display a photoflexoelectric effect whereby, under a combination of illumination and oscillation driven by a piezoelectric actuator, they generate orders of magnitude higher flexoelectricity than in the dark. We also show that photoflexoelectricity is not exclusive to halides but a general property of semiconductors that potentially enables simultaneous electromechanical and photovoltaic transduction and harvesting in unison from multiple energy inputs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water adsorption, dissociation and oxidation on SrTiO3 and ferroelectric surfaces revealed by ambient pressure X-ray photoelectron spectroscopy

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
Water dissociation on oxides is of great interest because its fundamental aspects are still not well understood and it has implications in many processes, from ferroelectric polarization screening phenomena to surface catalysis and surface chemistry on oxides. In situ water dissociation and redox processes on metal oxide perovskites which easily expose TiO-terminated surfaces, such as SrTiO, BaTiO or Pb(Zr,Ti)O, are studied by ambient pressure XPS, as a function of water vapour pressure. From the analysis of the O1s spectrum, we determine the presence of different types of oxygen based species, from hydroxyl groups, either bound to Ti and metal sites or lattice oxygen, to different peroxide compounds, and propose a model for the adsorbate layer composition, valid for environmental conditions. From the XPS analysis, we describe the existing surface redox reactions for metal oxide perovskites, occurring at different water vapour pressures. Among them, peroxide species resulting from surface oxidative reactions are correlated with the presence of Ti ions, which are observed to specifically promote surface oxidation and water dissociation as compared to other metals. Finally, surface peroxidation is enhanced by X-ray beam irradiation, leading to a higher coverage of peroxide species after beam overexposure and by ferroelectric polarization, demonstrating the enhancement of the reactivity of the surfaces of ferroelectric materials due to the effect of internal electric fields.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Non-linear nanoscale piezoresponse of single ZnO nanowires affected by piezotronic effect

  • Lozano, Helena|||0000-0002-8609-003X
  • Catalan, Gustau|||0000-0003-0214-4828
  • Esteve, Jaume|||0000-0001-9440-7984
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Murillo, Gonzalo|||0000-0002-0368-1900
Zinc oxide (ZnO) nanowires (NWs) as semiconductor piezoelectric nanostructures have emerged as material of interest for applications in energy harvesting, photonics, sensing, biomedical science, actuators or spintronics. The expression for the piezoelectric properties in semiconductor materials is concealed by the screening effect of the available carriers and the piezotronic effect, leading to complex nanoscale piezoresponse signals. Here, we have developed a metal-semiconductor-metal model to simulate the piezoresponse of single ZnO NWs, demonstrating that the apparent non-linearity in the piezoelectric coefficient arises from the asymmetry created by the forward and reversed biased Schottky barriers at the semiconductor-metal junctions. By directly measuring the experimental I-V characteristics of ZnO NWs with conductive atomic force microscope together with the piezoelectric vertical coefficient by piezoresponse force microscopy, and comparing them with the numerical calculations for our model, effective piezoelectric coefficients in the range d 33eff ∼ 8.6 pm V¯¹-12.3 pm V¯¹ have been extracted for ZnO NWs. We have further demonstrated via simulations the dependence between the effective piezoelectric coefficient d 33eff and the geometry and physical dimensions of the NW (radius to length ratio), revealing that the higher d 33eff is obtained for thin and long NWs due to the tensor nature proportionality between electric fields and deformation in NW geometries. Moreover, the non-linearity of the piezoresponse also leads to multiharmonic electromechanical response observed at the second and higher harmonics that indeed is not restricted to piezoelectric semiconductor materials but can be generalized to any type of asymmetric voltage drops on a piezoelectric structure as well as leaky wide band-gap semiconductor ferroelectrics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metallic diluted dimerization in VO2 tweeds

  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Santiso, José|||0000-0003-4274-2101
  • Catalan, Gustau|||0000-0003-0214-4828
The observation of electronic phase separation textures in vanadium dioxide, a prototypical electron-correlated oxide, has recently added new perspectives on the long standing debate about its metal-insulator transition and its applications. Yet, the lack of atomically resolved information on phases accompanying such complex patterns still hinders a comprehensive understanding of the transition and its implementation in practical devices. In this work, atomic resolution imaging and spectroscopy unveils the existence of ferroelastic tweed structures on ≈5 nm length scales, well below the resolution limit of currently used spectroscopic imaging techniques. Moreover, density functional theory calculations show that this pretransitional fine-scale tweed, which on average looks and behaves like the standard metallic rutile phase, is in fact weaved by semi-dimerized chains of vanadium in a new monoclinic phase that represents a structural bridge to the monoclinic insulating ground state. These observations provide a multiscale perspective for the interpretation of existing data, whereby phase coexistence and structural intermixing can occur all the way down to the atomic scale.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Role of pO2 and film microstructure on the memristive properties of La2NiO4+δ/LaNiO3-δ bilayers

  • Maas, Klaasjan
  • Wulles, Chloé
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Lafarge, Valentin
  • Santiso, José|||0000-0003-4274-2101
  • Burriel, Mónica|||0000-0002-7973-7421
LaNiO/LaNiO bilayers deposited at varying pO conditions resulted in remarkable differences in film microstructure and cell parameters, directly affecting the electrical behaviour of Pt/LaNiO/LaNiO/Pt devices. The devices deposited at low pO showed the largest memristance. We propose this is due to the formation of a p-type Schottky contact between LaNiO and LaNiO, where the extent of its carrier depletion width can be modulated by the electric-field induced drift of interstitial oxygen ions acting as mobile acceptor dopants in LaNiO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of humidity on the writing speed and domain wall dynamics of ferroelectric domains

  • Spasojevic, Irena|||0000-0002-6426-7009
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Catalan, Gustau|||0000-0003-0214-4828
  • Domingo Marimon, Neus|||0000-0002-5229-6638
The switching dynamics of ferroelectric polarization under electric fields depends on the availability of screening charges in order to stabilize the switched polarization. In ferroelectrics, thin films with exposed surfaces investigated by piezoresponse force microscopy (PFM), the main source of external screening charges is the atmosphere and the water neck, and therefore relative humidity (RH) plays a major role. Here, it is shown how the dynamic writing of domains in BaTiO thin films changes by varying scanning speeds in the range of RH between 2.5% and 60%. The measurements reveal that the critical speed for domain writing, which is defined as the highest speed at which electrical writing of a continuous stripe domain is possible, increases non-monotonically with RH. Additionally, the width of line domains shows a power law dependence on the writing speed, with a growth rate coefficient decreasing with RH. The size of the written domains at a constant speed as well as the creep-factor μ describing the domain wall kinetics follow the behavior of water adsorption represented by the adsorption isotherm, indicating that the screening mechanism dominating the switching dynamics is the thickness and the structure of adsorbed water structure and its associated dielectric constant and ionic mobility.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Strong strain gradients and phase coexistence at the metal-insulator transition in VO2 epitaxial films

  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Frontera, Carlos|||0000-0002-0091-4756
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Catalan, Gustau|||0000-0003-0214-4828
  • Santiso, José|||0000-0003-4274-2101
The proximity of a thermodynamic triple point and the formation of transient metastable phases may result in complex phase and microstructural trajectories across the metal-insulator transition in strained VO films. A detailed analysis using in-situ synchrotron X-ray diffraction unveils subtle fingerprints of this complexity in the structure of epitaxial films. During phase transition the low-temperature monoclinic M1 phase is constrained along the {111} planes by the coexisting high-temperature R phase domains, which remain epitaxially clamped to the substrate. This geometrical constraint induces counteracting local stresses that result in a combined tilt and uniaxial in-plane compression of M1 domains, and a concomitant anomalous c-axis elongation. This mechanism progressively transforms the M1 phase into the transitional triclinic phase (T), and ultimately into the monoclinic M2 phase, generating strong strain and tilt gradients that remain frozen after the complete transformation of the R phase upon cooling to RT. The transformation path of VO films, the complex competition between stable and metastable VO polymorphs and its impact on the structure of the low temperature monoclinic state, provide essential insights for understanding the electronic and mechanical properties of the films at the nanoscale, as well as to control their use in functional devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Piezoelectricity in nominally centrosymmetric phases

  • Aktas, Oktay|||0000-0001-6164-9477
  • Kangama, Moussa
  • Linyu, Gan
  • Catalan, Gustau|||0000-0003-0214-4828
  • Ding, Xiangdong
  • Zunger, Alex
  • Salje, Ekhard K. H.
Compound phases often display properties that are symmetry forbidden relative to their nominal, average crystallographic symmetry, even if extrinsic reasons (defects, strain, or imperfections) are not apparent. Specifically, breaking the macroscopic inversion symmetry of a centrosymmetric phase can dominate or significantly change its observed properties while the detailed mechanisms and magnitudes of the deviations of symmetry breaking are often obscure. Here, we choose piezoelectricity as a tool to investigate macroscopic inversion-symmetry breaking in nominally centrosymmetric materials as a prominent example and measure resonant piezoelectric spectroscopy (RPS) and Resonant Ultrasound Spectroscopy (RUS) in 15 compounds, 18 samples, and 21 different phases, including unpoled ferroelectrics, paraelectrics, relaxors, ferroelastics, incipient ferroelectrics, and isotropic materials with low defect concentrations, i.e., NaCl, fused silica, and CaF2. We exclude the flexoelectric effect as a source of the observed piezoelectricity yet observe piezoelectricity in all nominally cubic phases of these samples. By scaling the RPS intensities with those of RUS, we calibrate the effective piezoelectric coefficients using single-crystal quartz as standard. Using this scaling we determine the effective piezoelectric modulus in nominally nonpiezoelectric phases, finding that the "symmetry-forbidden"piezoelectric effect ranges from ∼1 to 10-5 pm/V (∼0.5% to ∼2×10-5% of the piezoelectric coefficient of poled ferroelectric lead zirconate titanate). The values for the unpoled ferroelectric phase are only slightly higher than those in the paraelectric phase. The extremely low coefficients are well below the detection limit of conventional piezoelectric measurements and demonstrate RPS as a convenient and ultrahighly sensitive method to measure piezoelectricity. We suggest that symmetry-breaking piezoelectricity in nominally centrosymmetric materials and disordered, unpoled ferroelectrics is a common phenomenon.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Oxidation processes at the surface of BaTiO3 thin films under environmental conditions

  • Spasojevic, Irena|||0000-0002-6426-7009
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Domingo Marimon, Neus|||0000-0002-5229-6638
Dissociation and adsorption of water on ferroelectric oxide surfaces play important role in the processes of screening and switching dynamics of ferroelectric polarization, as well as in catalytic processes which can be additionally coupled with light, temperature or vibration stimuli. In this work, we present XPS study of ferroelectric BaTiOthin films and determine the entanglement between surface chemistry, polarization direction and stability, by observing changes upon time exposure to environmental conditions, heating in Oatmosphere and irradiation in vacuum. We devote special attention to Ba 3d spectral region and identify two different oxidation states of O atoms in the compounds of Ba. While this second specie was generally attributed to Ba in surface compounds where it has different oxygen coordination than in the bulk, based on the XPS results of oxygen annealed thin films, we demonstrate that this so far neglected component, corresponds to barium peroxide (BaO) and identify it as important active specie for the study of screening mechanisms closely related with catalytic activity present in this ferroelectric material. Finally, we report on chemically assisted polarization switching in thin films induced by heating in vacuum or exposure to X-Ray radiation due to the formation of positive surface electric field created by oxygen or electron vacancies, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tunable Molecular Electrodes for Bistable Polarization Screening

  • Spasojevic, Irena|||0000-0002-6426-7009
  • Santiso, José|||0000-0003-4274-2101
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Catalan, Gustau|||0000-0003-0214-4828
  • Domingo Marimon, Neus|||0000-0002-5229-6638
The polar discontinuity at any ferroelectric surface creates a depolarizing field that must be screened for the polarization to be stable. In capacitors, screening is done by the electrodes, while in bare ferroelectric surfaces it is typically accomplished by atmospheric adsorbates. Although chemisorbed species can have even better screening efficiency than conventional electrodes, they are subject to unpredictable environmental fluctuations and, moreover, dominant charged species favor one polarity over the opposite. This paper proposes a new screening concept, namely surface functionalization with resonance-hybrid molecules, which combines the predictability and bipolarity of conventional electrodes with the screening efficiency of adsorbates. Thin films of barium titanate (BaTiO) coated with resonant para-aminobenzoic acid (pABA) display increased coercivity for both signs of ferroelectric polarization irrespective of the molecular layer thickness, thanks to the ability of these molecules to swap between different electronic configurations and adapt their surface charge density to the screening needs of the ferroelectric underneath. Because electron delocalization is only in the vertical direction, unlike conventional metals, chemical electrodes allow writing localized domains of different polarity underneath the same electrode. In addition, hybrid capacitors composed of graphene/pABA/ferroelectric have been made with enhanced coercivity compared to pure graphene-electode capacitors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Antisite Defects and Chemical Expansion in Low-damping, High-magnetization Yttrium Iron Garnet Films

  • Santiso, José|||0000-0003-4274-2101
  • García, Carlos
  • Romanque, Cristian
  • Henry, Loïc
  • Bernier, Nicolas
  • Bagués, Núria|||0000-0002-9360-0915
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
Yttrium iron garnet is widely investigated for its suitability in applications ranging from magneto-optical and microwave devices to magnonics. However, in the few-nanometer thickness range, epitaxial films exhibit a strong variability in magnetic behavior that hinders their implementation in technological devices. Here, direct visualization and spectroscopy of the atomic structure of a nominally stoichiometric thin film, exhibiting a small damping factor of 3.0 ⋅ 10, reveals the occurrence of Y-excess octahedral antisite defects. The two-magnon strength is very small, Γ≈10 Oe, indicating a very low occurrence of scattering centers. Notably, the saturation magnetization, 4πM=2.10 (±0.01) kOe, is higher than the bulk value, in consistency with the suppression of magnetic moment in the minority octahedral sublattice by the observed antisite defects. Analysis of elemental concentration profiles across the substrate-film interface suggests that the Y-excess is originated from unbalanced cationic interdiffusion during the early growth stages.