Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Piezoelectricity in nominally centrosymmetric phases

  • Aktas, Oktay
  • Kangama, Moussa
  • Linyu, Gan
  • Catalán, Gustau
  • Ding, Xiangdong
  • Zunger, Alex
  • Salje, Ekhard K. H.
Compound phases often display properties that are symmetry forbidden relative to their nominal, average crystallographic symmetry, even if extrinsic reasons (defects, strain, or imperfections) are not apparent. Specifically, breaking the macroscopic inversion symmetry of a centrosymmetric phase can dominate or significantly change its observed properties while the detailed mechanisms and magnitudes of the deviations of symmetry breaking are often obscure. Here, we choose piezoelectricity as a tool to investigate macroscopic inversion-symmetry breaking in nominally centrosymmetric materials as a prominent example and measure resonant piezoelectric spectroscopy (RPS) and Resonant Ultrasound Spectroscopy (RUS) in 15 compounds, 18 samples, and 21 different phases, including unpoled ferroelectrics, paraelectrics, relaxors, ferroelastics, incipient ferroelectrics, and isotropic materials with low defect concentrations, i.e., NaCl, fused silica, and CaF2. We exclude the flexoelectric effect as a source of the observed piezoelectricity yet observe piezoelectricity in all nominally cubic phases of these samples. By scaling the RPS intensities with those of RUS, we calibrate the effective piezoelectric coefficients using single-crystal quartz as standard. Using this scaling we determine the effective piezoelectric modulus in nominally nonpiezoelectric phases, finding that the "symmetry-forbidden"piezoelectric effect ranges from ∼1 to 10-5 pm/V (∼0.5% to ∼2×10-5% of the piezoelectric coefficient of poled ferroelectric lead zirconate titanate). The values for the unpoled ferroelectric phase are only slightly higher than those in the paraelectric phase. The extremely low coefficients are well below the detection limit of conventional piezoelectric measurements and demonstrate RPS as a convenient and ultrahighly sensitive method to measure piezoelectricity. We suggest that symmetry-breaking piezoelectricity in nominally centrosymmetric materials and disordered, unpoled ferroelectrics is a common phenomenon., O.A. acknowledges the support of the Natural National Science Foundation of China (Grant No. 51850410520). E.K.H.S. was funded by EPSRC (Grant No. EP/P024904/1) and the EU's Horizon 2020 programme under the Marie Skłodowska-Curie Grant Agreement No. 861153. G.C. is funded by MINECO Grant No. SEV-2017-0706 and the Generalitat de Catalunya Grant No. 2017 SGR 579.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct epitaxial growth of polar Hf0.5Zr0.5O2 films on corundum

  • Barriuso, Eduardo
  • Koutsogiannis, Panagiotis
  • Serrate, David
  • Herrero Martín, Javier
  • Jiménez, Ricardo
  • Magén, César
  • Algueró, Miguel
  • Algarabel, Pedro A.
  • Pardo, José A.
This article belongs to the Special Issue Pulsed Laser Deposited Nanostructures., Single-phase epitaxial Hf0.5Zr0.5O2 films with non-centrosymmetric orthorhombic structure have been grown directly on electrode-free corundum (α-Al2O3) substrates by pulsed laser deposition. A combination of high-resolution X-ray diffraction and X-ray absorption spectroscopy confirms the epitaxial growth of high-quality films belonging to the Pca21 space group, with [111] out-of-plane orientation. The surface of a 7-nm-thick sample exhibits an atomic step-terrace structure with a corrugation of the order of one atomic layer, as proved by atomic force microscopy. Scanning transmission electron microscopy reveals that it consists of grains with around 10 nm lateral size. The polar nature of this film has been corroborated by pyroelectric measurements. These results shed light on the mechanisms of the epitaxial stabilization of the ferroelectric phase of hafnia., We acknowledge the research projects MAT2017-88788-R, PID2019-107338RB-C64, and PID2020-112914RB-I00, funded by MCIN/AEI/10.13039/501100011033. This work has received funding from regional Gobierno de Aragón through projects E28_20R and E12_20R, including FEDER funding, and from the EU’s Horizon 2020 programme under the grant agreement No. 823717-ESTEEM3 and the Marie Skłodowska-Curie grant agreement No. 861153-MANIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improved polarization-retention-endurance in Hf0.5Zr0.5O2 films by ZrO2 capping via electrostatic effects

  • Song, Tingfeng
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Pardo, José A.
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Ferroelectric hafnia is one of the most promising materials for next generation of non-volatile memory devices. Several strategies have demonstrated to be of interest to improve its functional properties. Interface engineering, realized by the introduction of additional layer in the capacitor structure, is demonstrated as a promising strategy. However, interface layers can have multiple implications, such as changes in the chemistry of the interfaces and an increase of depolarization field, whose effects are difficult to discriminate. The role of HfO2 and ZrO2 capping is explored on polarization, retention, endurance, and leakage properties of Hf0.5Zr0.5O2 epitaxial films. In HfO2 capped films, lower polarization is observed, and endurance and retention are also comparably worse than in ZrO2 capped films. Complementary under illumination ferroelectric characterization and capacitance measurements indicate a reduction of defects and interface capacitance contribution in ZrO2 capped films. For both cappings, the interfaces with the Hf0.5Zr0.5O2 layer are shown to be compositionally sharp and the phase of Hf0.5Zr0.5O2 (HZO) grains is replicated on the capping layer, indicating that electrostatic effects prevail and that the use of interface layers with high permittivity, here ZrO2, is crucial to favor good functional properties., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00, PID2020-112914RB-I00 and PID2019-107727RB-I00 projects and from Generalitat de Catalunya (2021 SGR 00804) are acknowledged. The authors also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR, and EU Horizon 2020 programme under the Marie Skłodowska-Curie grant agreement No. 861153 MANIC. T.S. is financially supported by China Scholarship Council (CSC) with No. 201807000104., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering polar distortions in multiferroic Sr1−xBaxMnO3−δ thin films

  • Koutsogiannis, Panagiotis
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
The physical properties of perovskite oxide thin films are governed by the subtle interplay between chemical composition and crystal symmetry variations, which can be altered by epitaxial growth. In the case of perovskite-type multiferroic thin films, precise control of stoichiometry and epitaxial strain allows for gaining control over the ferroic properties through selective crystal distortions. Here, we demonstrate the chemical tailoring of the polar atomic displacements by tuning the stoichiometry of multiferroic Sr1−xBaxMnO3−δ (0 ≤ x ≤ 0.5) epitaxial thin films. A combination of x-ray diffraction and aberration-corrected scanning transmission electron microscopy enables unraveling the local polarization orientation at the nanoscale as a function of the film’s composition and induced crystalline structure. We demonstrate experimentally that the orientation of polarization is intimately linked to the Ba doping and O stoichiometry of the films and, with the biaxial strain induced by the substrate, it can be tuned either in-plane or out-of-plane with respect to the substrate by the appropriate choice of the post-growth annealing temperature and O2 atmosphere. This chemistry-mediated engineering of the polarization orientation of oxide thin films opens new venues for the design of functional multiferroic architectures and the exploration of novel physics and applications of ferroelectric textures with exotic topological properties., We acknowledge the research Project No. PID2020-112914RB-I00 funded by Grant No. MCIN/AEI/10.13039/501100011033. This work was funded from Regional Gobierno de Aragón through Project Nos. E13_23R and E28_23R, including FEDER funding and from the EU Horizon 2020 programme under the Marie Skłodowska-Curie Grant Agreement No. 861153 MANIC, and under the Grant Agreement No. 823717-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A CMOS-compatible oscillation-based VO2 Ising machine solver

  • Maher, Oliver
  • Jiménez Través, Manuel
  • Delacour, Corentin
  • Harnack, N.
  • Núñez, Juan
  • Avedillo, María J.
  • Linares-Barranco, Bernabé
  • Todri-Sanial, Aída
  • Indiveri, G.
  • Karg, S.
Phase-encoded oscillating neural networks offer compelling advantages over metal-oxide-semiconductor-based technology for tackling complex optimization problems, with promising potential for ultralow power consumption and exceptionally rapid computational performance. In this work, we investigate the ability of these networks to solve optimization problems belonging to the nondeterministic polynomial time complexity class using nanoscale vanadium-dioxide-based oscillators integrated onto a Silicon platform. Specifically, we demonstrate how the dynamic behavior of coupled vanadium dioxide devices can effectively solve combinatorial optimization problems, including Graph Coloring, Max-cut, and Max-3SAT problems. The electrical mappings of these problems are derived from the equivalent Ising Hamiltonian formulation to design circuits with up to nine crossbar vanadium dioxide oscillators. Using sub-harmonic injection locking techniques, we binarize the solution space provided by the oscillators and demonstrate that graphs with high connection density (¿¿>¿0.4) converge more easily towards the optimal solution due to the small spectral radius of the problem¿s equivalent adjacency matrix. Our findings indicate that these systems achieve stability within 25 oscillation cycles and exhibit power efficiency and potential for scaling that surpasses available commercial options and other technologies under study. These results pave the way for accelerated parallel computing enabled by large-scale networks of interconnected oscillators.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Domain wall dynamics in tungsten trioxide: Evidence for polar domain walls

  • Eckstein, Jack T.
  • Yokota, Hiroko
  • Domingo, Neus
  • Catalán, Gustau
  • Aktas, Oktay
  • Carpenter, Michael A.
  • Salje, Ekhard K. H.
Domain walls have distinct properties from the bulk, and tailoring them to suit the needs for device applications is critical. Tungsten trioxide, , is of great interest for device applications that make use of domain wall properties; it exhibits a phenomenologically rich sequence of phase transitions, virtually all of which are ferroelastic in character, resulting in many sets of domain walls at low temperatures, each with their own unique properties. Domain wall motion and its contribution to the piezoelectric response have been investigated in from 300 to 180 K using resonant ultrasound spectroscopy (RUS) and resonant piezoelectric spectroscopy (RPS), which showed that the , and phases give a piezoelectric response despite the bulk being nominally centrosymmetric. Second harmonic generation (SHG) confirmed that polarity was strongest within the domain walls, and additional weak signals were found in the domains. Domain wall mobility was investigated in the , and phases from 685 to 5 K. Domain walls in the and were more mobile than those in the and structures, and soon after the transition the walls become pinned at ., The project has received funding from the EU's Horizon 2020 programme under the Marie Skłodowska-Curie Grant Agreement No. 861153. Research was supported by the Center for Nanophase Materials Sciences (CNMS), which is a US Department of Energy, Office of Science User Facility at Oak Ridge National Laboratory. This work has received funding from JST FOREST Grants No. JPMJFR213Z, No. JSPS KAKENHI, No. JP21H01010, No. JP22H05138, and No. JP24K00554. This work was supported by the Engineering and Physical Sciences Research Council Grant No. EP/P024904/1 to E.K.H.S. and M.A.C., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic-scale characterization of 180° conductive domain walls in PbZr0.1Ti0.9O3

  • Koutsogiannis, Panagiotis
  • Risch, Felix
  • Pardo, José A.
  • Stolichnov, Igor
  • Magén, César
Conductive domain walls (DWs) in ferroic materials have emerged as promising candidates for applications in nanoelectronics due to their unique properties such as high conductivity and nonvolatility. In this study, we investigate the atomic structure and conductivity of nominally neutral 180° DWs artificially created in an epitaxial thin film of tetragonal PbZr0.1Ti0.9O3. Using piezoresponse force microscopy and scanning transmission electron microscopy, we elucidate the complex structure of these 180° DWs and their coupling with ferroelastic domains, revealing that they exhibit a complex structure due to the strain-mediated interplay with the ferroelastic domains. Our results demonstrate that the 180° DWs conductivity is associated with the emergence of polar discontinuities, including the formation of tail-to-tail charged segments, which has been further confirmed by electron energy loss spectroscopy. Additionally, we investigated the long-term performance of these domain boundaries, demonstrating their unique mobility and structural stability. Our findings provide insights into the atomic-scale mechanisms that turn nominally neutral DWs into highly conductive channels, paving the way for their use in advanced nanoelectronic devices., The authors acknowledge Research Projects PID2020-112914RB-I00 and PID2023-147211OB-C22 funded by Grant MCIN/AEI/10.13039/501100011033. This work was funded by Regional Gobierno de Aragon through Projects E13_23R and E28_23R, including FEDER funding and from the EU Horizon 2020 program under the Marie Skłodowska-Curie Grant Agreement 861153 MANIC. We also are thankful for Grant CEX2023-001286-S supported by MICIU/AEI/10.13039/501100011033 Severo Ochoa action. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at “Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Position-sensitive domain-by-domain switchable ferroelectric memristor

  • Risch, Felix
  • Koutsogiannis, Panagiotis
  • Tikhonov, Yuri
  • Razumnaya, Anna G.
  • Magén, César
  • Pardo, José A.
  • Lukyanchuk, Igor
  • Stolichnov, Igor
Domain-wall electronics based on the tunable transport in reconfigurable ferroic domain interfaces offer a promising platform for in-memory computing approaches and reprogrammable neuromorphic circuits. While conductive domain walls have been discovered in many materials, progress in the field is hindered by high-voltage operations, stability of the resistive states and limited control over the domain wall dynamics. Here, we show nonvolatile memristive functionalities based on precisely controllable conductive domain walls in tetragonal Pb(Zr,Ti)O3 thin films within a two-terminal parallel-plate capacitor geometry. Individual submicron domains can be manipulated selectively by position-sensitive low-voltage operations to address distinct resistive states with nanoampere-range conduction readout. Quantitative phase-field simulations reveal a complex pattern of interpenetrating a- and c-domain associated with the formation of 2D conducting layers at the intertwined regions and the emergence of 3D percolation channels of extraordinary high conductivity. Subnanometer resolution polarization mapping experimentally proves the existence of such extensive segments of charged tail-to-tail domain walls with unconventional structure at the ferroelastic-ferroelectric domain boundaries., This project has received funding from the EU Horizon 2020 program under the MSCA-ITN action MANIC, grant agreement No 861153 and MSCA-RISE action MELON, grant agreement No 872631. The authors gratefully acknowledge Dr. B. Fraygola for PLD deposition and Dr. S. Kamaei for helpful discussions. The authors acknowledge research Projects No. PID2020-112914RB-I00, PID2023-147211OB-C22 788, and the Severo Ochoa program CEX2023-001286-S funded by Grant No. MCIN/AEI/10.13039/501100011033. This work was also funded from Regional Gobierno de Aragon through Project Nos. E13_23R and E28_23R, including FEDER funding. A.R. acknowledges the Slovenian Research Agency support (P1-0125). This work was granted access to HPC resources of ”Plateforme MatriCS” within University of Picardie Jules Verne. ”Plateforme MatriCS” is cofinanced by the European Union with the European Regional Development Fund (FEDER) and the Hauts-De-France Regional Council among others., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antiferroelectric-like Switching inside Ferroelastic Domain Walls

  • Lu, Guangming
  • Catalán, Gustau
  • Salje, Ekhard K. H.
Ferroelastic materials (materials with switchable spontaneous strain) can be centrosymmetric, but their domain walls are always polar, as their internal strain gradients cause flexoelectricity. This flexoelectric polarization of the walls is not switchable by voltage, because reversing their polarity would require switching the spontaneous strain of the adjacent domains, annihilating the domain wall in the process. However, polarization can also arise from biquadratic coupling between polar and nonpolar order parameters (e.g., octahedral tilts in perovskites). Being quadratic, such coupling is independent of the sign of the polarization and thus allows switching between +P and -P. In this Letter, we seek to answer the question of whether the polarization of domain walls in an archetypal ferroelastic perovskite (CaTiO_{3}) is switchable, as per biquadratic coupling, or nonswitchable due to unipolar flexoelectricity. Using molecular dynamics calculations, we find that high electric fields gradually suppress tilts, broaden the ferroelastic domain walls, and eventually enable the onset of switchable polarization. Such switching can happen also in the bulk of the crystal, but the critical field is markedly lower in the domain walls, which are thus independently switchable. We also find that the polarization switching is antiferroelectric-like, with a double hysteresis loop. The analysis suggests that double-hysteresis switching can also occur in other ferroelastic perovskites., G. L. is grateful for the financial support from the National Natural Science Foundation of China (Grant No. 12304130), Shandong Provincial Natural Science Foundation (ZR2024QA146), and the Doctoral Starting Fund of Yantai University (Grant No. 1115-2222006). G. C. acknowledges financial support from the EU (FET-open Grant No. 766726, project TSAR), from the Catalan Government (Grant No. 2021 SGR 0129), and from the Agencia Estatal de Investigación (Projects No. PID2023-148673NB-I00 and No. CEX2021-001214-S). E. K. H. S. is grateful to EPSRC (EP/P024904/1) and the EU’s Horizon 2020 program under the Marie Sklodowska-Curie Grant (Grant No. 861153)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Direct epitaxial growth of polar Hf0.5 Zr0.5 O2 films on corundum

  • Barriuso, E.
  • Koutsogiannis, P.
  • Serrate, D.
  • Herrero-Martín, J.
  • Jiménez, R.
  • Magén, C.
  • Algueró, M.
  • Algarabel, P. A.
  • Pardo, J. A.
Single-phase epitaxial Hf0.5 Zr0.5 O2 films with non-centrosymmetric orthorhombic structure have been grown directly on electrode-free corundum (a-Al2 O3) substrates by pulsed laser deposition. A combination of high-resolution X-ray diffraction and X-ray absorption spectroscopy confirms the epitaxial growth of high-quality films belonging to the Pca21 space group, with 111] out-of-plane orientation. The surface of a 7-nm-thick sample exhibits an atomic step-terrace structure with a corrugation of the order of one atomic layer, as proved by atomic force microscopy. Scanning transmission electron microscopy reveals that it consists of grains with around 10 nm lateral size. The polar nature of this film has been corroborated by pyroelectric measurements. These results shed light on the mechanisms of the epitaxial stabilization of the ferroelectric phase of hafnia. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improved polarization-retention-endurance in Hf0.5Zr0.5O2 films by ZrO2 capping via electrostatic effects

  • Song, Tingfeng
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Pardo, José A.
  • Sánchez, Florencio
  • Fina, Ignasi
Ferroelectric hafnia is one of the most promising materials for next generation of non‐volatile memory devices. Several strategies have demonstrated to be of interest to improve its functional properties. Interface engineering, realized by the introduction of additional layer in the capacitor structure, is demonstrated as a promising strategy. However, interface layers can have multiple implications, such as changes in the chemistry of the interfaces and an increase of depolarization field, whose effects are difficult to discriminate. The role of HfO2 and ZrO2 capping is explored on polarization, retention, endurance, and leakage properties of Hf0.5Zr0.5O2 epitaxial films. In HfO2 capped films, lower polarization is observed, and endurance and retention are also comparably worse than in ZrO2 capped films. Complementary under illumination ferroelectric characterization and capacitance measurements indicate a reduction of defects and interface capacitance contribution in ZrO2 capped films. For both cappings, the interfaces with the Hf0.5Zr0.5O2 layer are shown to be compositionally sharp and the phase of Hf0.5Zr0.5O2 (HZO) grains is replicated on the capping layer, indicating that electrostatic effects prevail and that the use of interface layers with high permittivity, here ZrO2, is crucial to favor good functional properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineering polar distortions in multiferroic Sr1-xBaxMnO3-d thin films

  • Koutsogiannis, Panagiotis
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
The physical properties of perovskite oxide thin films are governed by the subtle interplay between chemical composition and crystal symmetry variations, which can be altered by epitaxial growth. In the case of perovskite-type multiferroic thin films, precise control of stoichiometry and epitaxial strain allows for gaining control over the ferroic properties through selective crystal distortions. Here, we demonstrate the chemical tailoring of the polar atomic displacements by tuning the stoichiometry of multiferroic Sr1−xBaxMnO3−δ (0 ≤ x ≤ 0.5) epitaxial thin films. A combination of x-ray diffraction and aberration-corrected scanning transmission electron microscopy enables unraveling the local polarization orientation at the nanoscale as a function of the film’s composition and induced crystalline structure. We demonstrate experimentally that the orientation of polarization is intimately linked to the Ba doping and O stoichiometry of the films and, with the biaxial strain induced by the substrate, it can be tuned either in-plane or out-of-plane with respect to the substrate by the appropriate choice of the post-growth annealing temperature and O2 atmosphere. This chemistry-mediated engineering of the polarization orientation of oxide thin films opens new venues for the design of functional multiferroic architectures and the exploration of novel physics and applications of ferroelectric textures with exotic topological properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Atomic-Scale Characterization of 180° Conductive Domain Walls in PbZr<sub>0.1</sub>Ti<sub>0.9</sub>O<sub>3</sub>

  • Koutsogiannis, Panagiotis
  • Risch, Felix
  • Pardo, José A.
  • Stolichnov, Igor
  • Magén, César
Conductive domain walls (DWs) in ferroic materials have emerged as promising candidates for applications in nanoelectronics due to their unique properties such as high conductivity and nonvolatility. In this study, we investigate the atomic structure and conductivity of nominally neutral 180° DWs artificially created in an epitaxial thin film of tetragonal PbZr0.1Ti0.9O3. Using piezoresponse force microscopy and scanning transmission electron microscopy, we elucidate the complex structure of these 180° DWs and their coupling with ferroelastic domains, revealing that they exhibit a complex structure due to the strain-mediated interplay with the ferroelastic domains. Our results demonstrate that the 180° DWs conductivity is associated with the emergence of polar discontinuities, including the formation of tail-to-tail charged segments, which has been further confirmed by electron energy loss spectroscopy. Additionally, we investigated the long-term performance of these domain boundaries, demonstrating their unique mobility and structural stability. Our findings provide insights into the atomic-scale mechanisms that turn nominally neutral DWs into highly conductive channels, paving the way for their use in advanced nanoelectronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Position-sensitive domain-by-domain switchable ferroelectric memristor

  • Risch, Felix
  • Koutsogiannis, Panagiotis
  • Tikhonov, Yuri
  • Razumnaya, Anna G.
  • Magén, César
  • Pardo, José A.
  • Lukyanchuk, Igor
  • Stolichnov, Igor
Domain-wall electronics based on the tunable transport in reconfigurable ferroic domain interfaces offer a promising platform for in-memory computing approaches and reprogrammable neuromorphic circuits. While conductive domain walls have been discovered in many materials, progress in the field is hindered by high-voltage operations, stability of the resistive states and limited control over the domain wall dynamics. Here, we show nonvolatile memristive functionalities based on precisely controllable conductive domain walls in tetragonal Pb(Zr,Ti)O3 thin films within a two-terminal parallel-plate capacitor geometry. Individual submicron domains can be manipulated selectively by position-sensitive low-voltage operations to address distinct resistive states with nanoampere-range conduction readout. Quantitative phase-field simulations reveal a complex pattern of interpenetrating a- and c-domain associated with the formation of 2D conducting layers at the intertwined regions and the emergence of 3D percolation channels of extraordinary high conductivity. Subnanometer resolution polarization mapping experimentally proves the existence of such extensive segments of charged tail-to-tail domain walls with unconventional structure at the ferroelastic-ferroelectric domain boundaries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Volatile Memristive Devices With Tunable Temporal Dynamics For Event‐Based Sensing

  • Spithouris, Dimitrios
  • Hellwig, Johannes
  • Greatorex, Hugh
  • Wittberg, Clemens
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Chicca, Elisabetta
  • Dittmann, Regina
Volatile memristive devices with controllable temporal dynamics enable adaptation to diverse temporal coding tasks, making them attractive for low‐power neuromorphic edge applications that process asynchronous sensory streams. However, most reported volatile memristors rely on abrupt filamentary switching, suffering from high variability, unreliable operation, and the need for current compliance and forming steps. In this work, an area‐dependent volatile memristive device based on a Pt/‐//Ta stack is presented, exhibiting ionic‐based volatility and a CMOS BEOL‐compatible process flow. The device combines low variability with forming‐free, self‐compliant, rectifying operation and gradual, analog‐like switching, achieving an ON/OFF ratio of . An in‐depth experimental and physical analysis of the mechanisms governing current transport and volatile behavior is provided. By exploiting the device's rich ionic dynamics, its volatility can be systematically tuned through applied stimulus and stack engineering, yielding decay time constants from tens of milliseconds to several seconds. A reliability study, including endurance and multilevel operation, demonstrates reproducible access to distinct volatile states. Finally, it is shown how a complete system, combining the device with spiking neuron models and CMOS circuitry, could exploit its programmable temporal dynamics for event‐based vision, with the wide range of decay constants supporting multiple sensory modalities.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Piezoelectricity in nominally centrosymmetric phases

  • Aktas, Oktay|||0000-0001-6164-9477
  • Kangama, Moussa
  • Linyu, Gan
  • Catalan, Gustau|||0000-0003-0214-4828
  • Ding, Xiangdong
  • Zunger, Alex
  • Salje, Ekhard K. H.
Compound phases often display properties that are symmetry forbidden relative to their nominal, average crystallographic symmetry, even if extrinsic reasons (defects, strain, or imperfections) are not apparent. Specifically, breaking the macroscopic inversion symmetry of a centrosymmetric phase can dominate or significantly change its observed properties while the detailed mechanisms and magnitudes of the deviations of symmetry breaking are often obscure. Here, we choose piezoelectricity as a tool to investigate macroscopic inversion-symmetry breaking in nominally centrosymmetric materials as a prominent example and measure resonant piezoelectric spectroscopy (RPS) and Resonant Ultrasound Spectroscopy (RUS) in 15 compounds, 18 samples, and 21 different phases, including unpoled ferroelectrics, paraelectrics, relaxors, ferroelastics, incipient ferroelectrics, and isotropic materials with low defect concentrations, i.e., NaCl, fused silica, and CaF2. We exclude the flexoelectric effect as a source of the observed piezoelectricity yet observe piezoelectricity in all nominally cubic phases of these samples. By scaling the RPS intensities with those of RUS, we calibrate the effective piezoelectric coefficients using single-crystal quartz as standard. Using this scaling we determine the effective piezoelectric modulus in nominally nonpiezoelectric phases, finding that the "symmetry-forbidden"piezoelectric effect ranges from ∼1 to 10-5 pm/V (∼0.5% to ∼2×10-5% of the piezoelectric coefficient of poled ferroelectric lead zirconate titanate). The values for the unpoled ferroelectric phase are only slightly higher than those in the paraelectric phase. The extremely low coefficients are well below the detection limit of conventional piezoelectric measurements and demonstrate RPS as a convenient and ultrahighly sensitive method to measure piezoelectricity. We suggest that symmetry-breaking piezoelectricity in nominally centrosymmetric materials and disordered, unpoled ferroelectrics is a common phenomenon.