Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 89
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineering polar distortions in multiferroic Sr1-xBaxMnO3-d thin films

  • Koutsogiannis, Panagiotis
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
The physical properties of perovskite oxide thin films are governed by the subtle interplay between chemical composition and crystal symmetry variations, which can be altered by epitaxial growth. In the case of perovskite-type multiferroic thin films, precise control of stoichiometry and epitaxial strain allows for gaining control over the ferroic properties through selective crystal distortions. Here, we demonstrate the chemical tailoring of the polar atomic displacements by tuning the stoichiometry of multiferroic Sr1−xBaxMnO3−δ (0 ≤ x ≤ 0.5) epitaxial thin films. A combination of x-ray diffraction and aberration-corrected scanning transmission electron microscopy enables unraveling the local polarization orientation at the nanoscale as a function of the film’s composition and induced crystalline structure. We demonstrate experimentally that the orientation of polarization is intimately linked to the Ba doping and O stoichiometry of the films and, with the biaxial strain induced by the substrate, it can be tuned either in-plane or out-of-plane with respect to the substrate by the appropriate choice of the post-growth annealing temperature and O2 atmosphere. This chemistry-mediated engineering of the polarization orientation of oxide thin films opens new venues for the design of functional multiferroic architectures and the exploration of novel physics and applications of ferroelectric textures with exotic topological properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthetic Control of the Defect Structure and Hierarchical Extra-Large-/Small-Pore Microporosity in Aluminosilicate Zeolite SWY

  • Chitac, Ruxandra G.
  • Zholobenko, Vladimir L.
  • Fletcher, Robin S.
  • Softley, Emma
  • Bradley, Jonathan
  • Mayoral, Alvaro
  • Turrina, Alessandro
  • Wright, Paul A.
The SWY-type aluminosilicate zeolite, STA-30, has been synthesized via different routes to understand its defect chemistry and solid acidity. The synthetic parameters varied were the gel aging, the Al source, and the organic structure directing agent. All syntheses give crystalline materials with similar Si/Al ratios (6–7) that are stable in the activated K,H-form and closely similar by powder X-ray diffraction. However, they exhibit major differences in the crystal morphology and in their intracrystalline porosity and silanol concentrations. The diDABCO-C82+ (1,1′-(octane-1,8-diyl)bis(1,4-diazabicyclo[2.2.2]octan)-1-ium)-templated STA-30 samples (but not those templated by bisquinuclidinium octane, diQuin-C82+) possess hierarchical microporosity, consisting of noncrystallographic extra-large micropores (13 Å) that connect with the characteristic swy and gme cages of the SWY structure. This results in pore volumes up to 30% greater than those measured in activated diQuin-C8_STA-30 as well as higher concentrations of silanols and fewer Brønsted acid sites (BASs). The hierarchical porosity is demonstrated by isopentane adsorption and the FTIR of adsorbed pyridine, which shows that up to 77% of the BASs are accessible (remarkable for a zeolite that has a small-pore crystal structure). A structural model of single can/d6r column vacancies is proposed for the extra-large micropores, which is revealed unambiguously by high-resolution scanning transmission electron microscopy. STA-30 can therefore be prepared as a hierarchically porous zeolite via direct synthesis. The additional noncrystallographic porosity and, subsequently, the amount of SiOHs in the zeolites can be enhanced or strongly reduced by the choice of crystallization conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-induced positional and chemical lattice reordering generating ferromagnetism

  • Pflug, Theo
  • Pablo-Navarro, Javier
  • Anwar, Md. Shabad
  • Olbrich, Markus
  • Magén, César
  • Ibarra, Manuel Ricardo
  • Potzger, Kay
  • Faßbender, Jürgen
  • Lindner, Jürgen
  • Horn, Alexander
  • Bali, Rantej
Atomic scale reordering of lattices can induce local modulations of functional material properties, such as reflectance and ferromagnetism. Pulsed femtosecond laser irradiation enables lattice reordering in the picosecond range. However, the dependence of the phase transitions on the initial lattice order as well as the temporal dynamics of these transitions remain to be understood. This study investigates the laser‐induced atomic reordering and the concomitant onset of ferromagnetism in thin Fe‐based alloy films with vastly differing initial atomic orders. The optical response to single femtosecond laser pulses on selected prototype systems, one that initially possesses positional disorder, Fe60V40, and a second system initially in a chemically ordered state, Fe60Al40, has been tracked with time. Despite the vastly different initial atomic orders the structure in both systems converges to a positionally ordered but chemically disordered state, accompanied by the onset of ferromagnetism. Time‐resolved measurements of the transient reflectance combined with simulations of the electron and phonon temperatures reveal that the reordering processes occur via the formation of a transient molten state with an approximate lifetime of 200 ps. These findings provide insights into the fundamental processes involved in laser‐induced atomic reordering, paving the way for controlling material properties in the picosecond range.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Focused Helium Ion and Electron Beam-Induced Deposition of Organometallic Tips for Dynamic Atomic Force Microscopy of Biomolecules in Liquid

  • Allen, Frances I.
  • De Teresa, José María
  • Onoa, Bibiana
We demonstrate the fabrication of sharp nanopillars of high aspect ratio onto specialized atomic force microscopy (AFM) microcantilevers and their use for high-speed AFM of DNA and nucleoproteins in liquid. The fabrication technique uses localized charged-particle-induced deposition with either a focused beam of helium ions or electrons in a helium ion microscope (HIM) or scanning electron microscope (SEM). This approach enables customized growth onto delicate substrates with nanometer-scale placement precision and in situ imaging of the final tip structures using the HIM or SEM. Tip radii of <10 nm are obtained and the underlying microcantilever remains intact. Instead of the more commonly used organic precursors employed for bio-AFM applications, we use an organometallic precursor (tungsten hexacarbonyl) resulting in tungsten-containing tips. Transmission electron microscopy reveals a thin layer of carbon on the tips. The interaction of the new tips with biological specimens is therefore likely very similar to that of standard carbonaceous tips, with the added benefit of robustness. A further advantage of the organometallic tips is that compared to carbonaceous tips they better withstand UV–ozone cleaning treatments to remove residual organic contaminants between experiments, which are inevitable during the scanning of soft biomolecules in liquid. Our tips can also be grown onto the blunted tips of previously used cantilevers, thus providing a means to recycle specialized cantilevers and restore their performance to the original manufacturer specifications. Finally, a focused helium ion beam milling technique to reduce the tip radii and thus further improve lateral spatial resolution in the AFM scans is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancing pancreatic ductal adenocarcinoma (PDAC) therapy with targeted carbon nano-onion (CNO)-mediated delivery of gemcitabine (GEM)-derived prodrugs

  • Bartkowski, Michal
  • Bincoletto, Valeria
  • Salaroglio, Iris Chiara
  • Ceccone, Giacomo
  • Arenal, Raul
  • Nervo, Sara
  • Rolando, Barbara
  • Riganti, Chiara
  • Arpicco, Silvia
  • Giordani, Silvia
Nanotechnology's potential in revolutionising cancer treatments is evident in targeted drug delivery systems (DDSs) engineered to optimise therapeutic efficacy and minimise toxicity. This study examines a novel nanocarrier constructed with carbon nano-onions (CNOs), engineered and evaluated for its ability to selectively target cancer cells overexpressing the hyaluronic acid receptor; CD44. Our results highlighted that the CNO-based nanocarrier coupled with hyaluronic acid as the targeting agent demonstrated effective uptake by CD44+ PANC-1 and MIA PaCa-2 cells, while avoiding CD44- Capan-1 cells. The CNO-based nanocarrier also exhibited excellent biocompatibility in all tested pancreatic ductal adenocarcinoma (PDAC) cells, as well as healthy cells. Notably, the CNO-based nanocarrier was successfully loaded with chemotherapeutic 4-(N)-acyl- sidechain-containing prodrugs derived from gemcitabine (GEM). These prodrugs alone exhibited remarkable efficacy in killing PDAC cells which are known to be GEM resistant, and their efficacy was amplified when combined with the CNO-based nanocarrier, particularly in targeting GEM-resistant CD44+ PDAC cells. These findings demonstrate the potential of CNOs as promising scaffolds in advancing targeted DDSs, signifying the translational potential of carbon nanoparticles for cancer therapy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gas-Phase Synthesis of Iron Silicide Nanostructures Using a Single-Source Precursor: Comparing Direct-Write Processing and Thermal Conversion

  • Jungwirth, Felix
  • Salvador-Porroche, Alba
  • Porrati, Fabrizio
  • Jochmann, Nicolas P.
  • Knez, Daniel
  • Huth, Michael
  • Gracia, Isabel
  • Cané, Carles
  • Cea, Pilar
  • De Teresa, José María
  • Barth, Sven
The investigation of precursor classes for the fabrication of nanostructures is of specific interest for maskless fabrication and direct nanoprinting. In this study, the differences in material composition depending on the employed process are illustrated for focused-ion-beam- and focused-electron-beam-induced deposition (FIBID/FEBID) and compared to the thermal decomposition in chemical vapor deposition (CVD). This article reports on specific differences in the deposit composition and microstructure when the (H3Si)2Fe(CO)4 precursor is converted into an inorganic material. Maximum metal/metalloid contents of up to 90 at. % are obtained in FIBID deposits and higher than 90 at. % in CVD films, while FEBID with the same precursor provides material containing less than 45 at. % total metal/metalloid content. Moreover, the Fe:Si ratio is retained well in FEBID and CVD processes, but FIBID using Ga+ ions liberates more than 50% of the initial Si provided by the precursor. This suggests that precursors for FIBID processes targeting binary materials should include multiple bonding such as bridging positions for nonmetals. In addition, an in situ method for investigations of supporting thermal effects of precursor fragmentation during the direct-writing processes is presented, and the applicability of the precursor for nanoscale 3D FEBID writing is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultra-Low-Loaded Platinum Bonded Hexagonal Boron Nitride as Stable Electrocatalyst for Hydrogen Generation

  • Sadhukhan, Rayantan
  • Kumar, Amar
  • Prasanna, Ponnappa K.
  • Guha, Anku
  • Arenal, Raul
  • Chakraborty, Sudip
  • Narayanan, Tharangattu N.
Chemical stability of hexagonal boron nitride (hBN) ultrathin layers in harsh electrolytes and the availability of nitrogen site in hBN to stabilize metals like Pt are used here to develop a high intrinsic activity hydrogen evolution reaction (HER) catalyst having low loaded Pt (5 weight% or <1 atomic%). A catalyst having a nonzero oxidation state for Pt (with a Pt–N bonding) is shown to be HER active even with low catalyst loadings (0.114 mgcm–2). Electronic modification of the shear exfoliated hBN sheets is achieved by Au nanoparticle-based surface decoration (hBN_Au), and further anchoring with Pt develops a catalyst (hBN_Au_Pt) with high turnover frequency for HER (∼15). The hBN_Au_Pt is shown to be a highly durable catalyst even after the accelerated durability test for 10000 cycles and temperature annealing at 100 °C. Density functional theory based calculations gave insights in to the electronic modifications of hBN with Au and the catalytic activity of the hBN_Au_Pt system, in line with the experimental studies, indicating the demonstration of a new class of catalyst system devoid of issues such as carbon corrosion and Pt leaching.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis and dynamics of PtSi nanoparticles on a carbon nanofilm by in-situ TEM Joule heating

  • Hettler, Simon
  • Arenal, Raúl
In-situ transmission electron microscopy has evolved to be a unique technique to study process dynamics down to the atomic scale. Here, we show that in-situ Joule heating of carbon nanofilms facilitates the investigation of the nucleation, annealing, diffusion and evaporation of PtSi nanoparticles in a controlled way. The nanoparticles form from Pt-based hydrocarbon molecules and silicon oxide present on the amorphous carbon nanofilm. The in-situ transmission electron microscopy approach permits shedding light on the interaction between the nanoparticles and the carbon support, crucial information when aiming for stable catalytic applications. The method is versatile, allows reaching very high temperatures and could be applied to study many different combinations of bimetallic and even multimetallic high-entropy alloy nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO<sub>2</sub> separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanotubes from Lanthanide-Based Misfit-Layered Compounds: Understanding the Growth, Thermodynamic, and Kinetic Stability Limits

  • Sreedhara, M. B.
  • Khadiev, Azat
  • Zheng, Kai
  • Hettler, Simon
  • Serra, Marco
  • Castelli, Ivano E.
  • Arenal, Raul
  • Novikov, Dmitri
  • Tenne, Reshef
Gaining insights into the kinetics and the thermodynamic limits of nanostructures in high-temperature reactions is crucial for controlling their unique morphology, phase, and structure. Nanotubes from lanthanide-based misfit-layered compounds (MLCs) have been known for more than a decade and were successfully produced mostly via a chemical vapor transport protocol. The MLC nanotubes show diverse structural arrangements and lattice disorders, which could have a salient impact on their properties. Though their structure and charge transfer properties are reasonably well understood, a lack of information on their thermodynamic and kinetic stability limits their scalable synthesis and their applicability in modern technologies. In this study, the growth, thermodynamic stability, and decomposition kinetics of lanthanide-based misfit nanotubes of two model compounds, i.e., (LaS)1.14TaS2 and (SmS)1.19TaS2 are elucidated in detail. The nanotubes were carefully analyzed via atomic resolution electron microscopy imaging and synchrotron-based X-ray and electron diffraction techniques, and the information on their morphology, phase, and structures was deduced. The key insights gained would help to establish the parameters to explore their physio-chemical properties further. Furthermore, this study sheds light on the complex issue of the high-temperature stability of nanotubes and nanostructures in general.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Easy functionalization of carbon nano-onions with disulfides and their use as recyclable heterogeneous organocatalysts

  • Mercadante, Alessandro
  • Bartkowski, Michal
  • Campisciano, Vincenzo
  • La Parola, Valeria
  • Spinella, Alberto
  • Arenal, Raul
  • Gruttadauria, Michelangelo
  • Giordani, Silvia
  • Giacalone, Francesco
A facile functionalization of carbon nano-onions (CNO), through an atom economical one-step process, with a series of different generation (2.0, 2.5, and 3.0G) poly(amidoamine) (PAMAM) dendrimers with a cystamine core and endowed with either methyl ester or amino groups in the periphery has been reported. The radical addition reaction onto CNO surface, after the homolytic rupture of the S–S bond of cystamine, afforded CNO-PAMAM hybrids, which were extensively characterized using various analytical and spectroscopic techniques such as thermogravimetric analysis (TGA), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, solid state 13C NMR, Raman, X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS) and zeta potential (ZP). Morphological and textural properties were also investigated by high-resolution transmission electron microscopy (HRTEM) analysis and N2 adsorption/desorption isotherms. Furthermore, the presence and availability of –NH2 groups has been demonstrated by applying the functionalized CNO with PAMAM 2.0G and 3.0G as heterogeneous and recyclable organocatalysts in the one-pot three-component synthesis of 2-amino-4H-chromene derivatives
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vortex matching at 6¿T in YBa2Cu3O7-d thin films by imprinting a 20¿nm-periodic pinning array with a focused helium ion beam

  • Karrer, Max
  • Aichner, Bernd
  • Wurster, Katja
  • Magén, César
  • Schmid, Christoph
  • Hutt, Robin
  • Budinská, Barbora
  • Dobrovolskiy, Oleksandr V.
  • Kleiner, Reinhold
  • Lang, Wolfgang
  • Goldobin, Edward
  • Koelle, Dieter
Controlled engineering of vortex pinning sites in copper-oxide superconductors is a critical issue in manufacturing devices based on magnetic flux quanta. To address this, we employed a focused He-ion beam (He-FIB) to irradiate thin YBa2Cu3O7−δ films and create ultradense hexagonal arrays of defects with lattice spacings as small as 20 nm. Critical current and magnetoresistance measurements demonstrate efficient pinning by a matching field of 6 T visible in a huge temperature range from the critical temperature Tc down to 2 K. These results show that He-FIB irradiation provides excellent opportunities for the development and application of superconducting fluxonic devices based on Abrikosov vortices. In particular, our findings suggest that such devices can operate at temperatures far below Tc, where superconductivity is robust.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tuning the electronic structure of monolayer <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>Mo</mml:mi><mml:msub><mml:mi mathvariant="normal">S</mml:mi><mml:mn>2</mml:mn></mml:msub></mml:mrow></mml:math> towards metal like via vanadium doping

  • Maity, Dipak
  • Sharma, Rahul
  • Sahoo, Krishna Rani
  • Lal, Ashique
  • Arenal, Raul
  • Narayanan, Tharangattu N.
Doping of two-dimensional layered semiconducting materials is becoming pivotal in tailoring their electronic properties, enabling the development of advanced electronic and optoelectronic devices, where the selection of dopant is important. Here, we demonstrate the potential of substitutional vanadium (V) doping in monolayer molybdenum disulfide (MoS2) lattice in different extents leading to tunable electronic and optoelectronic properties. We found that low-level V doping (∼1 at.%) induces p-type characteristics in otherwise n-type monolayer MoS2, whereas medium-level doping (∼5 at.%) leads to an ambipolar semiconductor. Degenerately doped MoS2 (∼9 at.%) facilitates a transition from semiconducting towards metallic (metal-like) with reduced electrical resistivity (∼4.5 Ωm of MoS2 to ∼2.2×10−5Ωm), low activation energy for transport (∼11 meV), and electric field independent drain current in field effect transistor–based transfer characteristics. A detailed temperature- and power-dependent photoluminescence study along with density functional theory–based calculations in support unravels the emergence of an excitonic transition at ∼850 nm with its intensity dependent on the amount of vanadium. This study shows the potential of V doping in MoS2 for generating multifunctional two-dimensional materials for next generation electronics, optoelectronics, and interconnects with systematic control over its electronic structure in a wide range. Published by the American Physical Society 2024
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modifying vacancy defects during systematic disordering of the Cr2AlC nano-lamellar system

  • Cabaço, João S.
  • Liedke, Maciej Oskar
  • Pablo-Navarro, Javier
  • Ganss, Fabian
  • Magén, César
  • Ibarra García, Manuel
  • Kentsch, Ulrich
  • Butterling, Maik
  • Wagner, Andreas
  • Lindner, Jürgen
  • Faßbender, Jürgen
  • Leyens, Christoph
  • Boucher, Richard
  • Bali, Rantej
The layered structure of MAX phases is associated with a number of functional properties and is the subject of extensive research. While the unit-cell layers of these structures have been well studied, much less is known about the distribution and manipulation of point defects within them. Here, we selected the prototype Cr2AlC system and, using variable energy positron beams, observed Doppler broadening and positron annihilation lifetimes to track the evolution of defects caused by the penetration of energetic transition metal ions (Co+ and Mn+) and noble gas ions (Ar+ and Ne+). In all cases an overall reduction of the open-volume defect concentration is observed post-irradiation. Atomic displacements induced by the penetrating ions drastically modify the defect distribution: the concentration of agglomerates of 9–15 vacancies (corresponding to positron lifetimes of 335–450 ps) in the precursor [Cr2C/Al]n layers is suppressed, whereas Al mono- and Al-Cr di-vacancy (lifetimes 217–231 ps) concentrations are enhanced. This breakdown of large defects into point defects scales with atomic displacements and is largely independent of the penetrating ion species, providing insights into the manipulation of point defects in nano-layered systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Stable CoO2 nanoscrolls with outstanding electrical properties

  • Hettler, Simon
  • Roy, Kankona Singha
  • Arenal, Raúl
  • Panchakarla, Leela S.
Layered CoO2 is of great interest for its promising properties but is meta‐stable in its bulk form. CoO2 is synthesized by converting the quasi‐1D crystal structure of bulk Ca3Co2O6 via a hydrothermal treatment. The resulting nanostructures are predominantly nanoscrolls with very thin walls, which exhibit long‐term stability. A detailed structural investigation reveals that the CoO2 is found to crystallize in monoclinic form, similar to the related CaCoO2‐CoO2 misfit structure. Individual nanoscrolls are characterized electrically and show a p‐type semiconducting nature with a high current‐carrying capacity of 4·105 A cm−2 and an extremely high breakdown voltage of up to 270 kV cm−1. The results demonstrate the possibility to stabilize meta‐stable materials in low‐dimensional forms and a promising application of the nanoscrolls as interconnect in high‐voltage electronic circuitry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Harnessing sustainable nanoclusters for sensitive optical detection of tetracyclines and the underlying mechanism

  • Justo-Tirado, Miguel
  • Pérez-Herráez, Irene
  • Escorihuela, Jorge
  • Arenal, Raúl
  • Zaballos-García, Elena
  • Pérez-Prieto, Julia
Simple and rapid sensing methods for the detection of antibiotics in drinks and foods are highly desirable due to the presence of these drugs in food products, as a consequence of extensive abuse of antibiotics in livestock production. In this study, we report a facile synthesis strategy of gold nanoclusters (AuNCs) passivated with N-acetyl-L-cysteine (AuNC@NAC). This nanocluster exhibits a fluorescence emission peak at 700 nm, which gradually decreases at increasing concentrations of antibiotics, such as tetracyclines. The limit of detection (LOD) was determined to be 0.8 ppm with a linear range of 0.1–140 μM (0.04–62 ppm). This method showcased exceptional selectivity in the detection of tetracyclines compared to anions, metallic cations and amino acids. The underlying mechanism has been elucidated, and the fluorescence quenching was found to be a combination of dynamic and static quenching mechanisms, with photoinduced electron transfer (PET) identified as the primary process for dynamic quenching.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Impact of the La2NiO4+d oxygen content on the synaptic properties of the TiN/La2NiO4+d/Pt memristive devices

  • Koroleva, Aleksandra
  • Khuu, Thoai-Khanh
  • Magén, César
  • Roussel, Hervé
  • Jiménez, Carmen
  • Ternon, Céline
  • Vatajelu, Elena-Ioana
  • Burriel, Mónica
The rapid development of brain‐inspired computing requires new artificial components and architectures for its hardware implementation. In this regard, memristive devices emerged as potential candidates for artificial synapses because of their ability to emulate the plasticity of the biological synapses. In this work, the synaptic behavior of the TiN/La2NiO4+δ/Pt memristive devices based on thermally annealed La2NiO4+δ films is thoroughly investigated. Using electron energy loss spectroscopy (EELS), it is shown that post‐deposition annealing using inert (Ar) or oxidizing (O2) atmospheres affects the interstitial oxygen content (δ) in the La2NiO4+δ films. Electrical characterization shows that both devices exhibit long‐term potentiation/depression (LTP/LTD) and spike‐timing‐dependent plasticity (STDP). At the same time, the Ar annealed TiN/La2NiO4+δ/Pt device demonstrates filamentary‐like behavior, fast switching, and low energy consumption. On the other hand, the O2 annealed TiN/La2NiO4+δ/Pt devices are forming‐free, exhibiting interfacial‐like resistive switching with slower kinetics. Finally, the simulation tools show that spiking neural network (SNN) architectures with weight updates based on the experimental data achieve high inference accuracy in the digit recognition task, which proves the potential of TiN/La2NiO4+δ/Pt devices for artificial synapse applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

FIB-fabrication of superconducting devices based on Bi2Se3 junctions

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • De Teresa, José María
Recent advances in quantum technologies are highly influencing the current technological scenario. Hybrid devices combining superconductors and topological insulators represent an excellent opportunity to study the topological superconducting phase, which offers interesting features that might have significant implications in the development of quantum sensing and quantum computing. Furthermore, focused ion beam techniques, whose versatility enables to create sophisticated devices with high degree of customization, can enhance the creation of complex devices. Here, we develop a novel approach for creating single-crystal devices that is applied to the fabrication of superconducting devices based on topological insulator Bi2Se3 in a geometry characteristic of a superconducting quantum interference device. Characterization of these devices reveals that superconductivity is induced in our crystal and the supercurrent is modulated by applying an external magnetic field. These results open the way to tailoring the response of hybrid devices that combine superconductors and topological insulators by focused ion beam techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unidirectional ray polaritons in twisted asymmetric stacks

  • Álvarez-Cuervo, J.
  • Obst, M.
  • Dixit, S.
  • Carini, G.
  • F. Tresguerres-Mata, A. I.
  • Lanza, C.
  • Terán-García, E.
  • Álvarez-Pérez, G.
  • Álvarez-Tomillo, L. F.
  • Diaz-Granados, K.
  • Kowalski, R.
  • Senerath, A. S.
  • Mueller, N. S.
  • Herrer, L.
  • De Teresa, J. M.
  • Wasserroth, S.
  • Klopf, J. M.
  • Beechem, T.
  • Wolf, M.
  • Eng, L. M.
  • Folland, T. G.
  • Tarazaga Martín-Luengo, A.
  • Martín-Sánchez, J.
  • Kehr, S. C.
  • Nikitin, A. Y.
  • Caldwell, J. D.
  • Alonso-González, P.
  • Paarmann, A.
The vast repository of van der Waals (vdW) materials supporting polaritons offers numerous possibilities to tailor electromagnetic waves at the nanoscale. The development of twistoptics—the modulation of the optical properties by twisting stacks of vdW materials—enables directional propagation of phonon polaritons (PhPs) along a single spatial direction, known as canalization. Here we demonstrate a complementary type of directional propagation of polaritons by reporting the visualization of unidirectional ray polaritons (URPs). They arise naturally in twisted hyperbolic stacks with very different thicknesses of their constituents, demonstrated for homostructures of -MoO3 and heterostructures of -MoO3 and -Ga2O3. Importantly, their ray-like propagation, characterized by large momenta and constant phase, is tunable by both the twist angle and the illumination frequency. Apart from their fundamental importance, our findings introduce twisted asymmetric stacks as efficient platforms for nanoscale directional polariton propagation, opening the door for applications in nanoimaging, (bio)-sensing, or polaritonic thermal management.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis of three isoelemental MXenes and their structure–property relationships

  • Downes, Marley
  • Shuck, Christopher E.
  • Wang, Ruocun John
  • Michalowski, Pawel Piotr
  • Shochat, Jonathan
  • Zhang, Danzhen
  • Shekhirev, Mikhail
  • Yang, Yizhou
  • Zaluzec, Nestor J.
  • Arenal, Raul
  • May, Steven J.
  • Gogotsi, Yury
The MXene family has rapidly expanded since its discovery in2011 to include nearly 50 unique MXenes, not accounting for solid solutionsand diverse surface terminations. However, a question raised since theirdiscovery has been: What is the effect of n? In other words, how does thenumber of layers affect the MXene properties? To date, no direct study of theimpact of n has been conducted due to the lack of isoelemental MXenecompositions spanning more than two n values. Herein, we report on a systemof three MXenes with identical M-site chemistries, (Mo2/3V1/3)n+1CnTx (n = 1,2, and 3), allowing for the study of MXene structure−property relationshipsacross n, for the first time. Chemical analysis of the samples shows completeand partial ordering of the M-elements in the n = 2 and 3 samples, respectively.We show that sample stability gradually evolves as n is increased from 1 to 3,while electronic and electrochemical properties exhibit more significant changes in going from n = 1 to 2 than from n = 2 to 3.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Toward quantitative thermoelectric characterization of (nano)materials by in-situ transmission electron microscopy

  • Hettler, Simon
  • Furqan, Mohammad
  • Sotelo, Andrés
  • Arenal, Raul
We explore the possibility to perform an in-situ transmission electron microscopy (TEM) thermoelectric characterization of materials. A differential heating element on a custom in-situ TEM microchip allows to generate a temperature gradient across the studied materials, which are simultaneously measured electrically. A thermovoltage was induced in all studied devices, whose sign corresponds to the sign of the Seebeck coefficient of the tested materials. The results indicate that in-situ thermoelectric TEM studies can help to profoundly understand fundamental aspects of thermoelectricity, which is exemplary demonstrated by tracking the thermovoltage during in-situ crystallization of an amorphous Ge thin film. We propose an improved in-situ TEM microchip design, which should facilitate a full quantitative measurement of the induced temperature gradient, the electrical and thermal conductivities, as well as the Seebeck coefficient. The benefit of the in-situ approach is the possibility to directly correlate the thermoelectric properties with the structure and chemical composition of the entire studied device down to the atomic level, including grain boundaries, dopants or crystal defects, and to trace its dynamic evolution upon heating or during the application of electrical currents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Atomic-Scale Characterization of 180° Conductive Domain Walls in PbZr<sub>0.1</sub>Ti<sub>0.9</sub>O<sub>3</sub>

  • Koutsogiannis, Panagiotis
  • Risch, Felix
  • Pardo, José A.
  • Stolichnov, Igor
  • Magén, César
Conductive domain walls (DWs) in ferroic materials have emerged as promising candidates for applications in nanoelectronics due to their unique properties such as high conductivity and nonvolatility. In this study, we investigate the atomic structure and conductivity of nominally neutral 180° DWs artificially created in an epitaxial thin film of tetragonal PbZr0.1Ti0.9O3. Using piezoresponse force microscopy and scanning transmission electron microscopy, we elucidate the complex structure of these 180° DWs and their coupling with ferroelastic domains, revealing that they exhibit a complex structure due to the strain-mediated interplay with the ferroelastic domains. Our results demonstrate that the 180° DWs conductivity is associated with the emergence of polar discontinuities, including the formation of tail-to-tail charged segments, which has been further confirmed by electron energy loss spectroscopy. Additionally, we investigated the long-term performance of these domain boundaries, demonstrating their unique mobility and structural stability. Our findings provide insights into the atomic-scale mechanisms that turn nominally neutral DWs into highly conductive channels, paving the way for their use in advanced nanoelectronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He<sup>+</sup> and Ne<sup>+</sup> beam nanowriting from organometallic thin films: a comparison with Ga<sup>+</sup> and e<sup>-</sup> beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • De Teresa, José María
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Misfit layered compounds: insights into chemical, kinetic, and thermodynamic stability of nanophases

  • Khadiev, Azat
  • Sreedhara, M. B.
  • Hettler, Simon
  • Novikov, Dmitri
  • Arenal, Raul
  • Tenne, Reshef
Compounds with layered structures (2D-materials), like transition metal-dichalcogenides (e.g., MoS2), attracted a great deal of interest in the scientific community in recent years...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Antitumor activity of bimetallic silver/gold nanoparticles against MCF-7 breast cancer cells

  • Martínez-Sanmiguel, Juan J.
  • Zarate-Triviño, Diana
  • García-García, María Paula
  • García-Martín, José Miguel
  • Mayoral, Álvaro
  • Huttel, Yves
  • Martínez, Lidia
  • Cholula-Díaz, Jorge L.
Breast cancer poses a global threat with rising incidence and high mortality. Conventional treatments, including chemotherapy, radiation, surgery, and immunotherapy, have side effects, such as resistance issues and adverse effects due to genetic mutations. Meanwhile, noble metal nanoparticles (NPs) synthesized using environmentally friendly methods offer alternative treatments. Bimetallic gold (Au) and silver (Ag) NPs, using natural compounds like starch as stabilizers, enhance biomedical applications, including breast cancer therapies. In this work, the optical properties, stability, and particle size of colloidal bimetallic Ag/Au NPs were analyzed using UV-visible spectroscopy and ζ-potential measurements. The structural properties of the NPs were studied by powder X-ray diffraction (PXRD), while the morphology, chemical composition and particle size were determined using scanning transmission electron microscopy (STEM). The antitumor properties of the Ag/Au NPs were analyzed on human breast cancer cells (MCF-7) using the MTT viability method, reactive oxygen species (ROS) production, and genotoxicity assays. Peripheral blood mononuclear cells (PBMCs) were used as a reference of healthy cells. UV-vis spectroscopy and EDX mapping analysis confirmed the synthesis of bimetallic Ag/Au NPs. Localized surface plasmon resonance (LSPR) absorption bands shifted from 407 nm (Ag) to 524 nm (Au) based on the chemical composition of the NPs. The Ag/Au NPs showed cytocompatibility in PBMCs and a dose-dependent anticancer effect against MCF-7 cancer cells, as well as cell death dependent on ROS production was observed, particularly in NPs with atomic compositions of 50 and 75 at% Ag. This biological activity of the bimetallic NPs was associated with genotoxic damage of 20–24% greater than that observed in the monometallic counterparts. This study demonstrated the synthesis of mono- and bimetallic Ag/Au NPs using a rapid, reproducible and environmentally friendly method, with successful biomedical application against human breast cancer MCF-7 cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • De Teresa, José María
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemically-Linked Heterostructures of Palladium Nanosheets and 2H-MoS2

  • Quirós-Ovies, Ramiro
  • Bastante, Pablo
  • Hettler, Simon
  • Vega-Mayoral, Víctor
  • Aina, Sergio
  • Balos, Vasileios
  • Pucher, Thomas
  • Castellanos-Gomez, Andrés
  • Arenal, Raul
  • Cabanillas-Gonzalez, Juan
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastian, Víctor
The burgeoning field of 2D heterostructures targets the combination of 2D materials with 3D, 1D, or 0D nanomaterials. Among the most popular 2D materials, the 2H polytype of molybdenum disulfide (MoS2) features a well‐defined bandgap that becomes direct at the monolayer level, which can be exploited for photodetection. A notable limitation of 2H‐MoS2 is its curtailed absorbance beyond the visible range. Here, a covalently‐linked Pd nanosheet (PdNS)/functionalized MoS2 (f‐MoS2) heterostructure is introduced, leveraging PdNS infrared‐absorbing properties to surmount this constraint. A bifunctional molecule, featuring a maleimide for attachment to MoS2 and a phenyl bromide for connection to PdNS, enables the synthesis of the heterostructure. Comprehensive spectroscopic and microscopic characterization shed light on the structure of PdNS@f‐MoS2 and the electronic interaction between its components. Prototype devices show an enhancement in the width and intensity of the optoelectronic response of PdNS@f‐MoS2 in the infrared, up to 1700 nm. In comparison, a van der Waals heterostructure with the same components shows poorer photoresponse. The results prove that the covalent linkage of metal nanostructures to 2D materials is a promising approach to build mixed‐dimensional heterostructures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

3D ice lithography and post-processing using gold organometallic precursor

  • Chang, Bingdong
  • Anand, Gwendoline A.E.
  • Le, Hoa Thanh
  • Liu, Xiyuan
  • Hansen, Thomas W.
  • de Teresa, Jose María
  • Han, Anpan
3D ice lithography (3DIL) is an emerging method for fabricating polymeric 3D objects with submicrometer patterns. However, there are no studies on 3DIL using metal-containing precursors. In addition, unlike numerous post-processing studies of two-photon polymerization (2PP) and focused electron beam-induced deposition (FEBID), there are no 3DIL post-processing investigations. Here, we present a 3DIL process using an organometallic precursor (gold dimethyl acetylacetonate, Au(acac)Me2), and its first post-processing study. We investigated 3D processing parameters and post-processing using Ar-, air annealing, and O2 plasma. X-ray photoelectron spectroscopy (XPS), atomic force microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy were used for materials analysis. Our results show (i) 3DIL processed materials exhibit thermoset properties, as they decompose rather than melt at elevated temperatures; (ii) free metal atoms diffuse and form clusters, here, gold nanoparticles with a diameter of around 10 nm were formed; (iii) oxygen treatments remove carbon-based ligands while leaving noble metals behind. Also, Ar annealing leads to less material loss than air annealing, while O2 plasma generates oxidized Au states and efficiently removes carbon ligands. Ar annealing at 600 °C reduces the carbon XPS signals significantly and increases the gold XPS signal by ten times, giving a good purification effect but with a high material removal of around 95 %. We printed large Au metalorganic 3D structures (>1000 times larger volume than FEBID), which suggests 3DIL bridges the gap between the capabilities of 2PP and FEBID. The unique capabilities of organometallic compounds to detect environmental changes can position 3DIL for sensing applications, and 3DIL is a safe and non-toxic technique to manufacture nanoparticle-containing 3D structures, which may have applications in many fields such as nanophotonics, drug delivery, and catalysis.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of Shell Thickness on the Oxygen Evolution Activity of Core@shell Fe3O4@CoFe2O4 Nanoparticles

  • Makarchuk, Iryna
  • Rotonnelli, Benjamin
  • Royer, Lisa
  • Hettler, Simón
  • Gallet, Jean-Jacques
  • Bournel, Fabrice
  • Guehl, Julie
  • Brige, Amandine
  • Zitolo, Andrea
  • Kéranguéven, Gwénaëlle
  • Bonnefont, Antoine
  • Arenal, Raul
  • Savinova, Elena
  • Asset, Tristan
  • Pichon, Benoit P.
Hydrogen production via water splitting requires efficient electrocatalysts to reduce the overpotential of the anodic oxygen evolution reaction (OER) and cathodic hydrogen evolution reaction (HER). In this study, we investigated the influence of apparent shell thickness on the electrocatalytic activity of Fe3O4@CoFe2O4 core@shell nanoparticles, an efficient noble metal-free OER catalyst in alkaline media. Three different types of core@shell nanoparticles were synthesized by the seed-mediated crystal growth of cobalt ferrite on pristine magnetite nanoparticles. The synthesis conditions were adapted to modulate the shell structure. Importantly, all proposed core@shell structures showed excellent stability during electrochemical testing, which is important for eventual industrial applications. We showed that the electrocatalytic performance of Fe3O4@CoFe2O4 core@shell nanoparticles was significantly influenced by the shell structure. The cooperative redox mechanism proposed to be the origin of the activity enhancement in core@shell nanoparticles was investigated by using in situ soft X-ray absorption spectroscopy (XAS). XAS revealed that cooperative redox interactions occurred between Co(II) and Fe(II) residing in close proximity at the core/shell interface, hence requiring a thin and continuous CoFe2O4 shell. Overall, this study provides insights into the design of efficient core@shell nanocatalysts for the OER, offering a path toward improving the performance of earth-abundant transition metal-oxide (TMO) catalysts for sustainable H2 production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Position-sensitive domain-by-domain switchable ferroelectric memristor

  • Risch, Felix
  • Koutsogiannis, Panagiotis
  • Tikhonov, Yuri
  • Razumnaya, Anna G.
  • Magén, César
  • Pardo, José A.
  • Lukyanchuk, Igor
  • Stolichnov, Igor
Domain-wall electronics based on the tunable transport in reconfigurable ferroic domain interfaces offer a promising platform for in-memory computing approaches and reprogrammable neuromorphic circuits. While conductive domain walls have been discovered in many materials, progress in the field is hindered by high-voltage operations, stability of the resistive states and limited control over the domain wall dynamics. Here, we show nonvolatile memristive functionalities based on precisely controllable conductive domain walls in tetragonal Pb(Zr,Ti)O3 thin films within a two-terminal parallel-plate capacitor geometry. Individual submicron domains can be manipulated selectively by position-sensitive low-voltage operations to address distinct resistive states with nanoampere-range conduction readout. Quantitative phase-field simulations reveal a complex pattern of interpenetrating a- and c-domain associated with the formation of 2D conducting layers at the intertwined regions and the emergence of 3D percolation channels of extraordinary high conductivity. Subnanometer resolution polarization mapping experimentally proves the existence of such extensive segments of charged tail-to-tail domain walls with unconventional structure at the ferroelastic-ferroelectric domain boundaries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene-modified g-C3N4/ a-Fe2O3 systems for light-induced hydrogen generation

  • Touati, Wassila
  • Filip Edelmannová, Miroslava
  • Karmaoui, Mohamed
  • Bekka, Ahmed
  • Furgeaud, Clarisse
  • Alaoui, Chakib
  • kadi Allah, Imene
  • Figueiredo, Bruno
  • Labrincha, J.A.
  • Arenal, Raul
  • Koci, Kamila
  • Maria Tobaldi, David
Photocatalysis represents an advanced and efficient technology for harnessing light energy. The non-toxicity, affordability, and versatility of this technique render it particularly attractive for hydrogen production via water splitting. Nevertheless, the primary challenge lies in identifying materials capable of efficiently catalyzing the water splitting reaction upon exposure to light. This study presents the influence of the quantity of hematite and graphene on g-C3N4 in the context of hydrogen generation from methanol-water decomposition under UVC irradiation. Pure g-C3N4 exhibits the highest hydrogen generation efficiency. However, adding hematite decreases photocatalytic efficiency, likely due to the formation of a type II heterojunction between α-Fe2O3 and g-C3N4, which reduces the overall reduction capacity of the system. While incorporating graphene into the g-C3N4/α-Fe2O3 system enhances photocatalytic efficiency by improving electron mobility and prolonging the lifetime of photo-generated excitons, the highest yield was achieved with BUF10/GNP0.5. This research offers valuable insights into charge transfer and separation processes for photo-generated excitons within the g-C3N4/α-Fe2O3 and g-C3N4/α-Fe2O3/graphene systems in the context of light-induced hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Proximity‐Mediated Multi‐Ferroelectric Coupling in Highly Strained EuO‐Graphene Heterostructures

  • Pandey, Satakshi
  • Pin, Thomas
  • Hettler, Simon
  • Arenal, Raul
  • Bouillet, Corinne
  • Maroutian, Thomas
  • Robert, Jérôme
  • Gobaut, Benoit
  • Kundys, Bohdan
  • Dayen, Jean-François
  • Halley, David
2D van der Waals materials and their heterostructures are a fantastic playground to explore emergent phenomena arising from electronic quantum hybridization effects. In the last decade, the spin-dependant hybridization effect pushed this frontier further introducing the magnetic proximity effect as a promising tool for spintronic applications. Here the uncharted proximity-controlled magnetoelectric effect in EuO/graphene heterostructure is unveiled. This is obtained while creating a new multiferroic hybrid heterostructure with multifunctional properties. Using a topotactic method magnetic insulating EuO thin films on graphene is grown under high compressive strain, which induces the appearance of an additional ferroelectric order, with an electric polarization that reaches up to 18 µC cm−2 at room temperature. This observation therefore quantitatively confirms the theoretical predictions made 15 years ago of a strain-induced ferroelectric state in EuO. Moreover, the EuO induces a magnetic proximity state into the graphene layer by interfacial hybridization. This new ferroelectric state in the EuO/graphene heterostructure is stable up to room temperature where it coexists with the EuO/graphene magnetic state. Furthermore, intertwined magneto-electric effects are shown in these strained heterostructures which can facilitate the manipulation of magnetization and electric polarization in future memory and neuromorphic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Structure and properties of tubular structures based on the quaternary misfit layered compound Sm1−xYxS–TaS2

  • Hettler, Simón
  • Furqan, Mohammad
  • Sreedhara, M. B.
  • Khadiev, Azat
  • Tenne, Reshef
  • Arenal, Raul
Misfit layered compounds (MLCs) are incommensurate super-lattices made up of two repeating subunits and are promising for different applications due to the possibility of a synergetic combination of the properties of the employed sublayers. A means of fine-tuning a specific MLC is to alloy one of the elements in the system. In this study, quaternary MLCs made of Sm1−xYxS–TaS2 were successfully synthesized and the resulting structures were characterized in detail, with a specific focus on tubular structures. Owing to the small difference between the ionic radii of Sm and Y, the structure of the quaternary MLCs follows the one of pristine SmS–TaS2, irrespective of the degree of alloying and with an anisotropic change of the lattice parameters up to a maximum of 2.7%. Nevertheless, microscopy, spectroscopy, and diffraction techniques allow us to reveal the impact of the composition on important characteristics of the MLC. Notably, for a specific composition, the ratio between the lattice parameters of the two subsystems adopts a value of 3 to 5, which could lead to a transition toward a commensurate superstructure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, T. E.
  • Valdés, D. P.
  • Hettler, S.
  • Nuñez, J. M.
  • Rodrigo, I.
  • Orue, I.
  • García, J. Á.
  • Plazaola, F.
  • Zysler, R. D.
  • Lima, E.
  • Aguirre, M. H.
  • Goya, G. F.
  • Arenal, R.
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

B/N-doped carbon nano-onions as nanocarriers for targeted breast cancer therapy

  • Mohan, Hugh
  • Salaroglio, Iris Chiara
  • Bartkowski, Michal
  • Courtney, Kellyjean
  • Andreana, Ilaria
  • Limongi, Tania
  • Arenal, Raul
  • Riganti, Chiara
  • Arpicco, Silvia
  • Giordani, Silvia
Cancer is one of the leading causes of death worldwide and represents a significant burden on global health systems. Many existing chemotherapy treatments come with severe side effects, ranging from hair loss to cardiotoxicity, and many types of cancer express chemotherapy resistance, such as triple-negative breast cancer. This study presents a novel boron/nitrogen-doped carbon nano-onion (BN-CNO) based nanocarrier system that can deliver doxorubicin (DOX) to cancer cells via a pH-dependent drug release mechanism. The nanocarrier formulation consists of a hyaluronic acid/phospholipid conjugate (HA-DMPE) that is non-covalently bound to the BN-CNOs upon which DOX is loaded via π–π stacking interactions. The HA-DMPE/BN-CNO/DOX system enhances the uptake and anticancer effects of DOX in MDA-MB-468 and MDA-MB-231 TNBC cells whilst reducing the cardiotoxicity of DOX in AC-16 human cardiomyocytes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Simultaneous Total Oxidation of Toluene, Propene, and CO Environmental Pollutants Using Bimetallic Au‐Pt/ZrO<sub>2</sub>/UVM‐7 Catalysts

  • Aggett, Kieran J.
  • García, Tomás
  • Morgan, David J.
  • Peláez-Fernández, Mario
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Solsona, Benjamín E.
  • Amorós, Pedro
  • Taylor, Stuart H.
Supported precious metal catalysts, containing either mono or bimetallic Au and Pt nanoparticles, anchored on a hierarchical porous UVM‐7 silica structure, were prepared and evaluated for the removal of volatile organic pollutants by oxidation. The catalysts were investigated for the simultaneous total oxidation of three model compounds: propene, toluene, and CO, commonly associated with “cold start pollutants” in automotive exhausts. Only Au showed low catalytic activity, while Pt nanoparticles were active, with a greater concentration of accessible Pt nanoparticles corresponding with increased catalytic activity. Interestingly, having both metals present on the same catalyst together was preferential for producing higher activity in the total oxidation of CO, propene, and toluene. The loadings of Pt nanoparticles on the catalyst surface, as well as the synthesis method, were important controlling factors. The order of metal loading deposition was influential, depositing Au and Pt sequentially resulted in surface enrichment of the latter deposited metal, leading to enhanced catalytic performance. When Au and Pt were loaded simultaneously, alloy formation occurred, and the surface Pt enrichment was more moderate, but still maintaining better catalytic performance compared with the pure Pt catalyst.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Two‐dimensional polycyclodextrins for strong multivalent host‐guest interactions at biointerfaces

  • Goudarzi, Zahra
  • Mohammadi, Zahra
  • Maleki, Reza
  • Beyranvand, Siamak
  • Nie, Chuanxiong
  • Gholami, Mohammad Fardin
  • Akkaya, Özge
  • Kalantari, Mahdieh
  • Nemati, Mohammad
  • Yousufvand, Fatemeh
  • Shahverdi, Fatemeh
  • Rashidipour, Marzieh
  • Ahmadian, Zainab
  • Donskyi, Ievgen
  • Nickl, Philip
  • Brzezinski, Marek
  • Ludwig, Kai
  • Rabe, Jürgen P.
  • Arenal, Raul
  • Chong, Cheng
  • ALL, Angelo H.
  • Adeli, Mohsen
While 2D polymers with aromatic backbones have been increasingly receiving interest from various scientific disciplines, their nonaromatic counterparts are less investigated. In this work, 2D poly(β‐cyclodextrin)s (2D‐CDs) with few hundred nanometers to millimeters lateral sizes and 0.7 nm thickness are synthesized using graphene and boron nitride as colloidal templates and used for multivalent host‐guest interactions with biological systems. Deposition of cyclodextrins on graphene and boron nitride templates followed by lateral crosslinking and template detachment resulted in 2D‐CDs with different physicochemical properties. The size of the 2D‐CDs is dominated by noncovalent interactions between cyclodextrins and templates. While an interaction energy of −224.3 kJ mol−1 at the interface between graphene and cyclodextrin led to few hundred nanometer 2D‐CDs, boron nitride with weaker interactions (−179.4 kJ mol−1) resulted in polymers with millimeters lateral sizes. The secondary hydroxyl groups of 2D‐CDs are changed to sodium sulfate, and 2D polymers with the ability of simultaneous host‐guest and electrostatic interactions with biosystems including vessel plaques and herpes simplex virus (HSV) are obtained. The sulfated 2D‐CDs (2D‐CDSs) show a high ability for virus binding (IC50 = 6 µg mL−1). Owing to their carbohydrate backbone, 2D‐CDs are novel heparin mimetics that can be formulated for efficient inhibition of viral infections.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unraveling dimensional tuning: from 2D to 3D in covalent organic frameworks for enhanced 2e<sup>–</sup> oxygen reduction reaction

  • Bhunia, Subhajit
  • Lu, Linguo
  • Chatterjee, Suzatra
  • Garaga, Mounesha
  • Mayoral, Alvaro
  • Head, Ashley R.
  • Greenbaum, Steven G.
  • Chen, Zhongfang
  • Wu, Xiaowei
  • Cabrera, Carlos R.
Covalent organic frameworks (COFs) with a two-dimensional (2D) topology have recently emerged as promising catalyst systems for the electrosynthesis of hydrogen peroxide (H2O2) from oxygen (O2). However, designing 2D catalysts to achieve higher H2O2 selectivity presents a significant challenge because of the extensive layer stacking and the aggregated active sites located in the basal planes. It results in lower atom utilization, which requires attention. In this study, we present two functionally similar COFs: one with a 2D rhombus topology (2D@BT_TPA-COF) and another with a three-dimensional (3D) noninterpenetrated pts topology (3D@BT_TPA-COF). Both COFs were utilized for the 2e– oxygen reduction reaction (2e– ORR). Tunning the dimensionality from 2D to 3D resulted in an increase in H2O2 selectivity from approximately ∼56% to approximately ∼96% (at 0.4 V) and a rise in the turnover frequency (TOF) from 0.05 to 0.08 s–1 at 0.3 V. Nonaggregated active site distribution over 3D topology, featuring higher active site exposure, provides better access to the O2/electrolyte and facilitates electron transfer leading to higher 2e– ORR activity and selectivity compared to the 2D counterpart.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of α-Fe<sub>2</sub>O<sub>3</sub> Nanoparticles/g-C<sub>3</sub>N<sub>4</sub> Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

  • Galán-González, Alejandro
  • Fernández, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Diaz, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Amphiphilic Zeolitic Imidazolate Framework for Improved CO2 Separation in PIM-1 Mixed Matrix Membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Íñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF‐94, known for its affinity to CO2, was partially modified with 2‐undecylimidazolate (umIm) through the solvent‐assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM‐1. The modified ZIF‐94 (ZIF‐94‐umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g−1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM‐1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hierarchical domain structures in buckled ferroelectric free sheets

  • Pesquera, David
  • Cordero-Edwards, Kumara
  • Checa, Marti
  • Ivanov, Ilia
  • Casals, Blai
  • Rosado, Marcos
  • Caicedo, José Manuel
  • Casado-Zueras, Laura
  • Pablo-Navarro, Javier
  • Magén, César
  • Santiso, José
  • Domingo, Neus
  • Catalan, Gustau
  • Sandiumenge, Felip
Flat elastic sheets tend to display wrinkles and folds. From pieces of clothing down to two-dimensional crystals, these corrugations appear in response to strain generated by sheet compression or stretching, thermal or mechanical mismatch with other elastic layers, or surface tension. Extensively studied in metals, polymers and, — more recently — in van der Waals exfoliated layers, with the advent of thin single crystal freestanding films of complex oxides, researchers are now paying attention to novel microstructural effects induced by bending ferroelectric-ferroelastics, where polarization is strongly coupled to lattice deformation. Here we show that wrinkle undulations in BaTiO3 sheets bonded to a viscoelastic substrate transform into a buckle delamination geometry when transferred onto a rigid substrate. Using spatially resolved techniques at different scales (Raman, scanning probe and electron microscopy), we show how these delaminations in the free BaTiO3 sheets display a self-organization of ferroelastic domains along the buckle profile that strongly differs from the more studied sinusoidal wrinkle geometry. Moreover, we disclose the hierarchical distribution of a secondary set of domains induced by the misalignment of these folding structures from the preferred in-plane crystallographic orientations. Our results disclose the relevance of the morphology and orientation of buckling instabilities in ferroelectric free sheets, for the stabilization of different domain structures, pointing to new routes for domain engineering of ferroelectrics in flexible oxide sheets.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemistry and Interfacial Structure Promoting Quasi-van der Waals Epitaxial Growth of WS2 Nanosheets on Sapphire for Prospective Application in Field-Effect Transistors

  • Majumder, Supriyo
  • Shinde, Nitin
  • Cavin, John
  • Chen, Chen
  • Dey, Arka Bikash
  • Narayanachari, K.V.L.V.
  • Zhang, Jiaqi
  • Garcia-Wetten, David
  • Dieguez, Oswaldo
  • Hettler, Simon
  • Cohen, Assael
  • Keane, Denis T.
  • Arenal, Raul
  • Rondinelli, James M.
  • Ismach, Ariel
  • Bedzyk, Michael J.
How do chemical and structural modifications to the supporting crystal surface affect the subsequent van der Waals (vdW) or quasi(Q)-vdW epitaxial growth of 2D nanocrystals? Developing an atomic-scale picture of such an interfacial system is crucial for understanding its impact on the physical and chemical properties of the supported 2D materials. The elucidation of the interfacial structure and chemistry needed to promote the Q-vdW epitaxial growth of 2D tungsten disulfide (WS2) nanocrystals contributes to the growth mechanism understanding, thus pushing forward the integration of such atomically thin semiconductors toward real field-effect transistor applications. In addition to an atomic-force microscopy top view, we showcase a combination of X-ray techniques for a top-to-bottom investigation of the complexities of the buried interface structures. This approach uses X-ray photoelectron spectroscopy, X-ray standing wave excited X-ray fluorescence, and crystal truncation rod scattering to produce a highly resolved chemical-state-specific 3D atomic map for the extended interface structure of WS2/α-Al2O3(001). Employing these detailed analysis methods, along with density functional theory to further refine the picoscale structure, we demonstrate how two different types of interface engineering during the pregrowth stage lead to significant differences in the chemical and structural modifications to the terminal surface of c-face sapphire, which in turn leads to substantial differences in the submonolayer growth of supported WS2 2D nanocrystals in terms of lateral domain sizes, epitaxial registry, vdW gaps, and stability. © 2025 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On the relationship between oxygen K edge fine structure and cobalt/nickel content in magnetite-based core-shell nanoparticles

  • Hettler, Simon
  • Arenal, Raul
Iron oxide nanoparticles (NPs) are used in a broad range of applications and offer the possibility of fine tuning their properties by forming hybrid core-shell structures. Scanning transmission electron microscopy (STEM) combined with electron energy loss spectroscopy (EELS) is frequently used to study such NPs at the local scale. Specifically, the energy loss near edge structure (ELNES) provides rich information on the local chemistry. Here, the dependence between the ELNES signal of the oxygen K edge and the incorporation of cobalt and nickel into the shell of magnetite NPs is investigated quantitatively using an intensity ratio between specific energy windows of the O-K edge. The analysis shows that both the local and global cobalt and nickel content of a NP influence this relationship. In addition, the overlap between the Fe-L1 and Ni-L2,3 edges is studied, the impact of a supporting film on the ELNES analysis is discussed, and the importance of a clean sample preparation is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electronic structure tunability of carbon-based 1D-polymers combining cross-conjugation and nitrogen doping

  • Candia, Adriana E.
  • Vilas-Varela, Manuel
  • Aguirre, Myriam H.
  • Rogero, Celia
  • Serrate, David
  • Peña, Diego
  • Lobo-Checa, Jorge
Quasi-one-dimensional polymer structures with extended π-electron systems stand out due to their remarkable application in light-emitting diodes and devices. Upon smart choice of their building units, such carbon-based organic nanoarchitectures provide excellent optoelectronic properties by tuning their dimensionality, atomic structure or intrinsic doping. Here, we generate and study three canonical cross-conjugated quasi one-dimensional chains with controlled nitrogen intrinsic doping, which is selectively introduced into their poly-phenylene backbones. By means of scanning tunneling microscopy and spectroscopy we corroborate that the cross-conjugation that break the chain linearity is exclusively responsible of the electronic confinement in the straight segments. Moreover, we demonstrate that the LUMO state exhibits similar spatial distribution for the cross-conjugated polymers independently of the pyridine content of the initial precursor. Despite this coincidence, the semiconducting character and other relevant electronic properties of the polymers are found to depend both on the chain morphology and on the precise position and number of doping nitrogen atoms synthetically introduced into the molecular precursors. We compare these results to related previous studies, which allows us to unambiguously validate the opto-electronic tunability upon the choice of the polymers’ building units.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Terpyridine-functionalized single-walled carbon nanotubes towards selectivity in the oxygen reduction reaction

  • Sideri, Ioanna K.
  • Arenal, Raul
  • Tagmatarchis, Nikos
Single-walled carbon nanotubes (SWCNTs) have been widely employed as electrocatalysts due to their exceptional mechanical strength and electronic properties, despite lacking intrinsic catalytic centers. Current research efforts focus on enhancing their catalytic activity by modifying them with organometallic chelate complexes, to achieve controlled molecular-level structuring and improved performance in Proton Exchange Membrane Fuel Cells (PEMFCs). While the mechanistic understanding of their electrocatalytic behavior in relation to molecular structure remains in its early stages, it offers valuable insights for the development of efficient electrocatalysts. In this study, SWCNTs were stepwise chemically modified with terpyridine ligands both in the absence of metal and in the presence of ruthenium (Ru) in two different oxidation states. The resulting SWCNT-based nanomaterials were characterized using Raman, UV-Vis, XPS and energy-dispersive X-ray spectroscopy (EDS) coupled with transmission electron microscopy (TEM) imaging, while the degree of functionalization was assessed through thermogravimetric analysis (TGA). A comprehensive electrocatalytic investigation demonstrated how covalent modification with Ru2+ and Ru3+ terpyridine complexes influences the mechanistic pathway of the oxygen reduction reaction (ORR). This comparative analysis underscores the critical role of the first coordination sphere of precious metals in both the thermodynamics and kinetics of ORR, when anchored onto carbon nanomaterial lattices, providing valuable insights for the nanostructured design of efficient carbon-based electrocatalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Systematic modulation of charge and spin in graphene nanoribbons on MgO

  • Domínguez-Celorrio, Amelia
  • Edens, Leonard
  • Sanz, Sofía
  • Vilas-Varela, Manuel
  • Martinez-Castro, Jose
  • Peña, Diego
  • Langlais, Véronique
  • Frederiksen, Thomas
  • Pascual, José I.
  • Serrate, David
In order to take full advantage of graphene nanostructures in quantum technologies, their charge and spin state must be precisely controlled. Graphene quantum dots require external gating potentials to tune their ground state. Here, we show systematic manipulation of the electron occupation in graphene nanoribbons lying on MgO layers grown on Ag(001). Owing to the efficient electronic decoupling character of MgO, and the electropositive nature of the substrate, the ribbons host an integer number of electrons that depend on their length and shape. This results in the alternation between a non-magnetic closed-shell state and an open-shell paramagnetic system for even and odd electron occupations respectively. For the odd case, we find a narrow Coulomb correlation gap, which is the smoking gun of its spin-½ state. Comparisons of scanning tunnelling microscopy data with mean-field Hubbard simulations confirm the discretization of the ribbons’ electronic states and charge excess of up to 19 electrons per ribbon.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Near-Infrared Light-Accelerated Bioorthogonal Drug Uncaging and Photothermal Ablation by Anisotropic Pd@Au Plasmonic Nanorods

  • Ortega-Liebana, M. Carmen
  • Travnickova, Jana
  • Adam, Catherine
  • González-Calderón, Davir
  • Lorente-Macías, Álvaro
  • Lochenie, Charles
  • Arenal, Raul
  • Patton, E. Elizabeth
  • Unciti-Broceta, Asier
Selective activation of chemotherapeutics at the tumor site via bioorthogonal catalysis is a promising strategy to reduce collateral damage to healthy tissues and organs. Despite significant advances in this field, targeted drug activation by transition-metal catalysts is still limited by insufficient spatiotemporal control over the metal-mediated uncaging process. Herein, we report the development of anisotropic Pd@Au plasmonic nanorods with the capacity to accelerate dealkylation reactions under near-infrared (NIR) irradiation, thereby enabling precise control over when and where these catalytic devices are switched on. We also show that the stability and in cellulo chemical properties of Pd@Au nanorods are enhanced by Au–S functionalization with PEGylated phospholipids and report the development of a novel masking group for prodyes and prodrugs: the POxOC group, designed to improve physicochemical properties and the rate of the Pd-triggered dye/drug release process. NIR-photoactivation of lipo-Pd@Au nanorods is able to catalyze the uncaging of inactive drug precursors and release heat to the environment, killing cancer cells in culture and xenografted in zebrafish. This work provides a novel targeted strategy for photothermal chemotherapy by NIR-laser focalization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Phase Stability and Structural Evolution of Core/Shell Iron Oxide Nanoparticles Due to Oxidative Diffusion: Implications for Spintronic Applications

  • Nuñez, Jorge M.
  • Lima, Enio
  • Lohr, Javier Hernán
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto D.
  • Tolley, Alfredo
  • Bartolomé, Fernando
  • Rubín, Javier
  • Hettler, Simón
  • Arenal, Raúl
  • Aguirre, Myriam Haydee
  • Winkler, Elin L.
Core/shell iron oxide nanoparticles are promising candidates for spintronic applications due to their tunable magnetic properties and interfacial exchange interactions that allow the modulation of spin-polarized conduction. However, their performance depends critically on phase stability and structural integrity under fabrication and operating conditions involving thermal and oxidative diffusion. This study examines the transformation of iron oxide nanoparticles induced by oxidative diffusion in thermal annealing from wüstite to hematite through an intermediate (wüstite)-core/(magnetite–maghemite)-shell structure. The nanoparticles exhibit a rounded cubic morphology, with a distorted C2/m FeO phase at the core under compressive strain along (010), while the Fe3O4 shell exhibits tensile strain along (110). Oxygen diffusion occurs preferentially along [100] from the cube faces, influencing shape evolution. The system exhibits an exchange bias field of up to 3 kOe and enhanced magnetic hardening of up to 4 kOe, attributed to interfacial exchange interactions. Higher annealing temperature promotes the formation of γ-Fe2O3 with ordered vacancies. The exchange bias effect persists, even when the FeO core is smaller than 1 nm in size, indicating that the strain stabilizes the antiferromagnetic (AFM) order and enhances core/shell magnetic coupling. As oxidation proceeds, strain is gradually relaxed, and at 873 K, the oxidation to hematite is promoted, characterized by a Morin transition at 245 K. These findings reveal the intricate relationship between oxidation-driven structural evolution and magnetic behavior in engineered nanoparticle systems, underscoring the critical importance of material selection tailored to specific fabrication processes, operating conditions, and device performance requirements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Yttrium: A Highly Efficient Dopant for Ferroelectric HfO<sub>2</sub>

  • Ghiasabadi Farahani, Mehrdad
  • Magén, César
  • Quintana, Alberto
  • Fina, Ignasi
  • Sánchez, Florencio
The ferroelectric phase of HfO2 is metastable, and its stabilization in thin films strongly depends on both doping and microstructure. Optimally doped films exhibit high ferroelectric polarization; however, it typically decreases rapidly with increasing film thickness. In contrast to these usual results, a few exceptions report ferroelectricity in thick films with specific dopants, such as Y or La, crystallized under conditions that favor granular microstructure. Disentangling the roles of microstructure and doping on the thickness-dependent stability of ferroelectricity remains essential, and identifying highly effective dopant atoms is of high relevance. In this work, Y-doped epitaxial films of various thicknesses up to about 100 nm are prepared to determine phase evolution and ferroelectric polarization. Films deposited on SrTiO3(001) and SrTiO3(110) substrates exhibit robust ferroelectric response across the entire thickness range, in contrast to equivalent La-doped films. Coexistence of monoclinic (paraelectric) and orthorhombic (ferroelectric) phases is observed, with columnar grains revealed by scanning transmission electron microscopy, demonstrating that the microstructure of epitaxial HfO2 films can be preserved beyond 10 nm. The observed columnar grain structure indicates that the robustness of ferroelectricity in Y-doped films results from the high effectiveness of Y, supporting its use in devices requiring thick ferroelectric layers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Strain Relief and Domain Architecture in Epitaxial NiO Filmson La 2/3 Sr1/3 MnO3 /SrTiO3 for Spin-Transport Engineering

  • Chen, Shoulong
  • Frontera, Carlos
  • Toda-Casaban, Meritxell
  • Pomar, Alberto
  • Balcells, Lluis
  • Konstantinovic, Zorica
  • Magén, César
  • Martínez, Benjamín
  • Mestres, Narcís
This study reports on the epitaxial growth and structural characterization of ultrathin NiO‐films deposited by magnetron sputtering on La2/3Sr1/3MnO3 (LSMO) films grown on SrTiO3 (STO) substrates with (001)‐ and (111)‐orientations. X‐ray diffraction and atomic‐force microscopy show that all NiO layers are single‐phase, face‐centered pseudo‐cubic, atomically smooth, root‐main‐square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High‐resolution reciprocal‐space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit‐cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration‐corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)‐oriented samples, the four antiferromagnetic T‐domains are oblique to the sample plane, while on the (111) case, one lies in‐plane. This in‐plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high‐performance spintronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Real Structure of Intergrown ZSM‐5/ZSM‐11 Industrial Zeolite Catalysts

  • Shannon, Mervyn D.
  • Cox, Paul A.
  • Mayoral, Alvaro
  • Hsieh, Ming-Feng
  • Turrina, Alessandro
In some industrial‐scale reactions, an intergrowth of ZSM‐5 and ZSM‐11 aluminosilicate zeolites is the preferred catalyst. These structures each have two intersecting channel systems with 10‐ring windows, defined by 10 oxygen atoms. The channels are both straight in ZSM‐11 but one is sinusoidal in ZSM‐5. Parallel bands of ZSM‐5 and ZSM‐11 intergrown, as assumed in the literature, would lead to some straight sections along the sinusoidal [100] channels in ZSM‐5. However, additional defects lead to the formation of 8‐ring and 12‐ring windows to replace some of the 10‐ring windows along the [100] channels in ZSM‐5. In turn these defects affect the adjacent, intersecting straight 10‐ring channels along [010] and lead to a possible 20 geometries of the pore walls, of which about half are observed. In intergrowths with 5–20% ZSM‐11, meandering antiphase boundaries dominate the defects, lattice energy calculations show correlation with numbers of 4‐rings introduced, and molecular mechanics calculations suggest tetra‐butyl ammonium structure‐directing agents are accommodated but do not direct their formation. In catalytic use, 8‐ring windows cause pore blockages while 12‐ring windows create cavities that can accommodate even larger reaction intermediates than ZSM‐11 or can nucleate coking. Diffusion of reactants and products along [010] is also affected.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Self-Modulation Instability in High Power Ferromagnetic Resonance of BiYIG Nanodisks

  • Ngouagnia Yemeli, I.
  • Perna, S.
  • Gouéré, D.
  • Kolli, A.
  • Sangiao, S.
  • De Teresa, J.M.
  • Muñoz, M.
  • Anane, A.
  • d’Aquino, M.
  • Merbouche, H.
  • Serpico, C.
  • de Loubens, G.
We study the high power ferromagnetic resonance of perpendicularly magnetized BiYIG nanodisks where the uniaxial anisotropy almost compensates for the shape anisotropy. We observe a strong saturation of the averaged magnetization upon moderately increasing the amplitude of the rf field and a broadening of the ferromagnetic resonance line toward lower and higher magnetic fields. Full micromagnetic simulations reveal that a self-modulation of the dynamic magnetization is responsible for this behavior. To get more insight into this unstable dynamics, we analyze it in terms of normal modes. The number of modes involved is found to rapidly increase above the critical threshold. Still, a normal mode model taking into account only a few of them and their mutual nonlinear couplings allows us to reproduce the observed phenomenon. The normal mode analysis and micromagnetic simulations also predict a Suhl-like instability at a larger excitation power, when it is slowly increased from low values, and bistability. Using two-tone spectroscopy, we directly measure the self-modulation spectrum and provide experimental evidence of bistable dynamics. These findings open some perspectives on using high dimensional dynamics in magnetic nanostructures for unconventional information processing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cryogenic Focused Ion Beam Milling to Investigate the Anisotropic Magnetotransport Properties of Bismuth Microcrystals

  • Sáenz-Hernández, Amaia
  • Sangiao, Soraya
  • Felser, Claudia
  • Shekhar, Chandra
  • Pardo, José Ángel
  • Ibarra, Alfonso
  • De Teresa, José María
Bulk single crystals exhibit the intrinsic properties of a given compound, but studying their anisotropic magnetotransport properties is challenging. Focused Ion Beam (FIB) milling at room temperature has been previously used to guide the electrical current path along a defined crystal direction or to extract microcrystals where the electrical current flows along a known direction. However, some materials, such as bismuth, melt under FIB irradiation. Bismuth, known for its unique properties, including very large magnetoresistance and a highly anisotropic Fermi surface, reacts to room‐temperature Ga+ FIB irradiation, forming droplets on its surface. Therefore, a novel microfabrication approach based on cryogenic FIB milling is developed here. By using a Peltier stage or an integrated cryogenic module, surface melting is mitigated below −30 °C. Microscale slabs are extracted, either parallel or perpendicular to the single crystal surface, then shaped and electrically contacted in a chip for magnetotransport characterization. The large magnetoresistance observed along with Shubnikov–de Haas oscillations with single periodicity when current is applied perpendicular to the c axis, highlights the success of the approach. These results enable FIB microfabrication of single crystals that are sensitive to FIB irradiation and investigation of the anisotropic magnetotransport properties in microcrystals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unraveling the Decomposition Pathways of LaS-TaS<sub>2</sub> Misfit-Layered Compound Nanostructures under Extreme Electrical Currents by In Situ TEM

  • Hettler, Simon
  • Sreedhara, MB
  • Tenne, Reshef
  • Arenal, Raúl
Nanostructures of the misfit-layered compound (MLC) LaS-TaS2 are brought to breakdown by application of high electrical currents within a transmission electron microscope. Imaging, diffraction, and spectroscopy techniques are employed to study their decomposition process and the resulting structures. The main decomposition route is the breakdown of the TaS2 layers, which induces the formation of metallic Ta on the surface of the nanostructures when the critical current density is surpassed. This observation confirms the assumption that TaS2 is the current-carrying layer in these types of MLCs. The different behavior of tubular 1D and 2D structures is revealed, and a metallic glass phase made of La, Ta, and S could be observed upon exceeding a threshold current. The work shows how in situ transmission electron microscopy can help understand the breakdown mechanism of electrical devices or connectors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Surface-Driven Electron Localization and Defect Heterogeneity in Ceria

  • Zhang, Xingfan
  • Yoko, Akira
  • Zhou, Yi
  • Jee, Woongkyu
  • Mayoral, Alvaro
  • Liu, Taifeng
  • Guan, Jingcheng
  • Lu, You
  • Keal, Thomas W.
  • Buckeridge, John
  • Ninomiya, Kakeru
  • Nishibori, Maiko
  • Yamamoto, Susumu
  • Matsuda, Iwao
  • Adschiri, Tadafumi
  • Terasaki, Osamu
  • Woodley, Scott M.
  • Catlow, C. Richard A.
  • Sokol, Alexey A.
The exceptional performance of ceria (CeO2) in catalysis and energy conversion is fundamentally governed by its defect chemistry, particularly oxygen vacancies. The formation of each oxygen vacancy (VO••) is assumed to be compensated by two localized electrons on cations (Ce3+). Here, we show by combining theory with experiment that while this 1 VO••: 2Ce3+ ratio accounts for the global charge compensation, it does not apply at the local scale, particularly in nanoparticles. Hybrid quantum mechanical/molecular mechanical (QM/MM) defect calculations, together with synchrotron X-ray photoelectron spectroscopy (XPS) measurements, show that electrons have a strong preference to localize and segregate on surfaces, which can overcome the trapping force from the VO•• sites in the bulk. At a given Fermi level, the surface VO•• tends to trap more electrons than those in bulk, resulting in a higher Ce3+ to VO•• ratio on surfaces than that in the bulk, driven by the preferential localization of electrons and enhanced VO••–Ce3+coupling. Large-scale unbiased Monte Carlo simulations on ceria nanoparticles confirmed this trend and further show that the surface segregation of electrons is more pronounced at low reduction levels and in smaller nanoparticles. In highly reduced ceria nanoparticles, however, the enhanced repulsive interactions lead to a less significant extent of defect heterogeneity or even reverse the location preference of defects in some nanoparticles. Our findings underscore the need to consider both the overall nonstoichiometry and local defect behavior in easily reducible oxides, with direct relevance to their performance in catalytic and energy applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced plasma-assisted CO2 methanation on Ru/CeO2 catalysts

  • Musig, Beatrice
  • Barauna, Jairo
  • Roy, Abhijit
  • Arenal, Raul
  • Gálvez, María Elena
  • García, Tomás
  • Murillo, Ramón
  • Navarro, María Victoria
Methanation process utilizes CO₂ as a carbon feedstock for synthesizing energy carriers and value-added chemicals. The combination of methanation with plasma-catalysis has emerged as a promising avenue for the electrification of power-to-gas technologies, representing a significant development in the transition to sustainable energy systems. The present study investigates the impact of low 5 % mol Ru loading on CeO2, focusing in the role of the metal in comparison to Ni and the metal-support interactions examined using CeO2 with different structures (nanoneedles, nanopowder) and Ru dispersion within the support. The catalyst Ru/NN with nanoneedles of ceria achieved CO₂ conversion of 70 % and CH₄ selectivity of 99 % at 1CO₂/4H₂, WHSV of 30 L h−1 gcat-1, 12 kgCO2 kgcat-1 h−1 and plasma input power of 8.9 W. The enhanced plasma-catalytic activity of Ru/NN can be attributed to the increased effective H2 dissociation, beneficial physicochemical and electrical properties attributed to the choice of support and optimal metal-support interaction. The lower dielectric capacitance calculated for this catalyst is the result of reduced charge storage and a faster response to the applied electric field. This produces less intense microdischarges and a more stable and uniform plasma environment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Observation of a guest-free Si46 clathrate-I framework from Ba8-xSi46 upon in situ vacuum heating

  • Zhou, Yi
  • Zhang, Qing
  • Mayoral, Alvaro
  • Spackman, Peter R.
  • Matsumoto, Takashi
  • Li, Jun
  • Gale, Julian D.
  • Anderson, Michael W.
  • Fukuoka, Hiroshi
  • Yamanaka, Shoji
  • Terasaki, Osamu
Silicon and its composites are key materials owing to their extensive use in the semiconductor industry. While the diamond-structured form dominates, other allotropes with superior properties at ambient conditions remain of interest. Toward this, Si46 clathrate type-I crystals containing alkali/alkaline-earth metals have been extensively studied, but the experimental observation of a guest-free Si46 structure has been challenging. Using advanced electron microscopy, we show experimental evidence of guest-free clathrate-I Si46 framework from Ba8-xSi46 under in situ heating. We reveal the stepwise Ba evacuation process, starting with loss of Ba1 from the smaller cages to form Ba6Si46, followed by removal of Ba2 in larger cages to reach Si46 that appears in the thin region of the nanocrystal with a thickness around 4-6 nm at 500 °C. Calculations give a quasi-direct bandgap of 1.89 eV and support the preferential evacuation of Ba1. The observation of this guest-free Si46 framework opens up possibilities for applications in high-speed transistors, optoelectronic devices or solar cell technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High Pressure-Based Synthesis of Nanoporous Metal–Organic Framework ZIF-93 Giving Rise to a Phase for Proton Conduction

  • Pérez-Miana, Marta
  • Fernández de Luis, Roberto
  • Fidalgo-Marijuan, Arkaitz
  • Li, Junyan
  • Mayoral, Álvaro
  • Coronas, Joaquín
This study aims to develop a green, solvent-free synthesis of ZIF-93 (ZIF stands for zeolitic imidazolate framework) and to explore the formation of different phases. We report the solvent-free synthesis of a previously unreported nanoporous ZIF phase, ZIF-93_HP (HP referring to “high-pressure”), from zinc oxide using a dual high-pressure (150 MPa) and thermal (110 °C) method. The influence of key synthesis parameters, such as the amount of NH4NO3 promotor and reaction steps, was systematically investigated to maximize the conversion of ZnO into the intermediate ZIF-93_HP, while, in parallel, preventing its further conversion into nanoporous ZIF-93 phase. The material was extensively characterized by X-ray diffraction, thermogravimetry, electron microscopy and N2 and CO2 adsorption, which revealed insights into the structure, morphology and nanoporosity of ZIF-93_HP. ZIF-93_HP, with empirical formula of Zn(C5N2OH5)2·1.2(NH4NO3)·(H2O), is related to the previously reported ZIF-93 (Zn(C5N2OH5)2). Water washing of this phase led to the transformation into ZIF-93 and a significant increase in the BET specific surface area (from 4 to 181 m2/g). In addition, the presence of NH4+ and NO3– ions into its structure makes ZIF-93_HP proton conductor at room temperature and moisture conditions (3.76 × 10–3 S/cm), a property that decreases with increasing temperature due to dehydration. The discovery of ZIF-93_HP highlights the potential of the high-pressure, solvent-free synthesis as a powerful tool for the exploration of different ZIFs and reticular materials that are inaccessible through traditional solvothermal methods. As crystallization under solvent-free conditions is often influenced by nonthermodynamic equilibrium, this approach holds a great potential for expanding the material landscape by enabling the discovery of different phases and structures with unique properties, such as the promising proton conductivity demonstrated here.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Revealing the structural complexity of ETS-10 using 4D-STEM & electron ptychography

  • Daiyuan, Li
  • Kayani, Sara
  • Dong, Zhuoya
  • Zhang, Qing
  • Cobreces, Santiago
  • Pizarro, Daniel
  • Mayoral, Alvaro
Atomic-level structural elucidation of zeolites remains challenging, particularly due to their sensitivity to the electron beam, as in the case of ETS-10, which features a unique 12-membered ring titanosilicate framework with linear Ti–O–Ti chains. In this study, we demonstrate the use of four-dimensional scanning transmission electron microscopy (4D-STEM) combined with electron ptychography to image Eu-exchanged ETS-10 (Eu-ETS-10) at sub-angstrom resolution. A homemade ptychographic reconstruction algorithm based on the extended ptychographical iterative engine (ePIE) was developed, enabling recovery of high-fidelity phase contrast images. The reconstructed images reveal not only all T-sites, including Si and Ti atoms, but also light elements such as oxygen and extraframework Eu3+ cations. Surface terminations and stacking faults were clearly resolved, allowing identification of the ABA and ABC polymorphs and their local transformations along the three dimensions through multislice reconstruction. These results validate ptychography as a powerful technique for atomic-scale analysis of fragile zeolitic materials offering unique insights into the structural complexity of ETS-10.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Origin of strain in H+ ion implanted LiTaO3 single crystals

  • Louiset, A.
  • Schamm-Chardon, S.
  • Kononchuk, O.
  • Magén, C.
  • Cherkashin, N.
To enhance the performance of surface acoustic wave filters, industries are actively investigating the substitution of bulk lithium tantalate piezoelectric single-crystal substrates with thin films integrated onto silicon substrates. Ion implantation in these single crystals serves as the initial stage of the Smart-Cut process, widely recognized for enabling material transfer onto silicon. Identification of the physical phenomena behind ion implantation in piezoelectric single crystals remains a challenge due to the emergence of strain and, thus, local electric fields gradients. In this work, we address strain generated in LiTaO3 single crystals by H+ ion implantation in relation to the structural modifications and as a function of implanted fluence. We show that strain is not only proportional to the local H concentration, the case found in common target materials, such as Si crystals, but also proportional to the fluence with some non-linear coefficients depending on the modified elastic constants of the implanted material. We evidence that the damage redistribution is at the root of this intriguing phenomenon, which is probably linked to the emergence of gradual electric fields. Targeting a unified law for the evolution of strain with local H-concentration and H-fluence and generated damage, we provide the generalized form for fluence-normalized strain as a function of the H-to-damage concentration ratio, which is independent of fluence. Depending on the ratio range, four distinct evolutionary regimes describe the function. These are discussed in detail.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Degenerate Monolayer Ising Superconductors via Chiral‐Achiral Molecule Intercalation

  • Margineda, Daniel
  • Álvarez-García, Covadonga
  • Tezze, Daniel
  • Gerivani, Sanaz
  • Caldevilla-Asenjo, David
  • Furqan, Mohammad
  • Rivilla, Iván
  • Casanova, Fèlix
  • Arenal, Raul
  • Artacho, Emilio
  • Hueso, Luis E.
  • Gobbi, Marco
Engineering unconventional superconducting states is a central challenge in condensed matter physics. Molecule-intercalated TaS2 superlattices have recently been reported to host such states, yet their origin remains debated-underscoring the urgent need for controlled, device-integrated studies. Here, we report that nanometer-thick TaS2 and NbSe2 intercalated with chiral and achiral organic cations instead exhibit robust monolayer-like Ising superconductivity, with no evidence of unconventional pairing. Using high-quality superlattices integrated into devices, we disentangle the roles of interlayer coupling and charge transfer in shaping their superconducting behavior. In TaS2, intercalation induces interlayer decoupling regardless of molecular size or symmetry, yielding monolayer-like Ising superconductivity. NbSe2 instead retains quasi-3D transport, with a gradual Ising enhancement and near-monolayer behavior only at the largest interlayer spacing. Transport remains reciprocal across all superlattices, showing no measurable signatures of inversion-symmetry breaking. The data are consistent with electronically detached monolayers with opposite spin-split bands, coupled through thermal and tunneling processes. In this scenario, supported by DFT calculations, inversion symmetry is preserved. These findings establish molecular intercalation compounds as a robust, device-ready, platform for engineering advanced superconducting superlattices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interface Engineering Using Multiple La-Doped HfO2 Epitaxial Subnanolayers To Improve the Ferroelectric Properties of Hf0.5Zr0.5O2 Films

  • Ghiasabadi Farahani, Mehrdad
  • Song, Tingfeng
  • Magén, César
  • Zou, Jingye
  • Sánchez, Florencio
  • Fina, Ignasi
The fabrication of ferroelectric multilayer systems based on hafnia represents a promising approach for achieving high-performance ferroelectric devices. Electrical cycling instability is, in this regard, a key barrier to commercialization. Here, we report on the incorporation of La:HfO2 subnanolayers into an epitaxial Hf0.5Zr0.5O2 film, forming multilayer heterostructures. Ferroelectric properties of multilayers are compared with single-layer structures. We observe that wake-up and fatigue are not present up to 10(5) cycles in the multilayers. The improved stability is enabled by the approximate to 25% reduction of coercive field together with the lower leakage resulting from the columnar microstructure throughout the entire thickness without phase discontinuity at interfaces and negligible presence of structural defects. This improvement on endurance response is obtained while the polarization is maintained in comparison with single Hf0.5Zr0.5O2 films; there is negligible loss of the polarization throught time and there is a fast response time lower than 100 ns, limited by the measurement circuit. In addition, dielectric permittivity and large resistive switching up to 10(8)%, not related to the ferroelectric response, are also observed. These findings underscore multilayer architecture as an interesting approach to improve properties while also showing that careful selection of interlayer composition is critical to improve device performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, A.M.
  • Galán-González, A.
  • Arenal, R.
  • Ansón-Casaos, A.
  • Maser, W.K.
The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A large interlaboratory electron diffraction study of monolayer graphene

  • Tillotson, Evan
  • Thornley, William
  • Talbott, William
  • Eggeman, Alexander S
  • Kriuchkova, Daria
  • Sullivan-Allsop, Sam
  • Smith, Matt
  • Liu, Xuzhao
  • Slattery, Ashley
  • Yap, Pei Lay
  • Losic, Dusan
  • Xu, Zhun
  • Wang, Huan
  • Ciston, Jim
  • Rakowski, Alexander
  • Ribet, Stephanie M
  • Savitzky, Benjamin H
  • Schuster, Manfred E
  • Allen, Christopher S
  • Douglas-Henry, Danielle
  • Nicolosi, Valeria
  • Herzing, Andrew
  • O’Connell, Jacques
  • Olivier, Ezra J
  • Neethling, Jan
  • Zou, Yi-Chao
  • Duran, Ercin
  • Cai, Rongsheng
  • Ngo, Duc-The
  • Gorbachev, Roman
  • Haas, Jonas
  • Schlegel, Michael
  • Meyer, Jannik
  • Centeno, Alba
  • Pesquera, Amaia
  • Zurutuza, Amaia
  • Kang, Sungsu
  • Park, Jungwon
  • Erofeev, Ivan
  • Mirsaidov, Utkur
  • Ophus, Colin
  • Rentenberger, Christian
  • Waitz, Thomas
  • Kotakoski, Jani
  • Roy, Abhijit
  • Arenal, Raul
  • Pollard, Andrew J
  • Haigh, Sarah J
Standardisation of data collection and analysis is essential to enable commercialisation of 2D materials in a wide range of technologies. Selected area electron diffraction (SAED) in the transmission electron microscope (TEM) is one of the key methods for distinguishing monolayer from bilayer and few-layer graphene by comparing the 1st and 2nd order diffraction spot intensities. Yet there are many factors that can affect the reliability of data collection and interpretation, causing the measurement of monolayer samples to deviate from the literature boundary condition of I-{2 & strns;110}/I-{11 & strns;00}< 1 for monolayer graphene (1LG). Here we present the results of a large interlaboratory SAED comparison study, where 15 international laboratories measured and analysed nominally identical samples of chemical vapour deposited graphene. Large variations were observed in the measured ratios of diffraction spot intensities, with the largest variance associated with poor quality SAED data resulting from inadequate specimen handling and storage. To inform the reliable determination of monolayer thickness from SAED patterns we provide a description of best practice for specimen handling, TEM operation, data collection and analysis. This work was undertaken within VAMAS Technical Working Area 41: Graphene and related 2D materials-Project 9, the results of which have been directly incorporated into ISO/TS 21356-2 for the characterisation of graphene sheets. We find that when this methodology is followed, 1LG can be distinguished from bilayer or thicker material with high confidence where analysis of a single SAED pattern gives I-{2 & strns;110}/I-{11 & strns;00}< 1.2, even in the absence of precise specimen tilting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electronically Driven Magnetoelectric Coupling in Co/La:Hf0.5Zr0.5O2 Heterostructures for Energy-Efficient Neuromorphic Computing

  • Quintana, Alberto
  • Magen, Cesar
  • Ghiasabadi Farahani, Mehrdad
  • Dong, Wenjing
  • Zou, Jingye
  • Dix, Nico
  • Ma, Zheng
  • Menéndez, Enric
  • Foerster, Michael
  • Niño, Miguel Angel
  • Cazorla, Claudio
  • Sort, Jordi
  • Sánchez, Florencio
  • Fina, Ignasi
Magnetoelectric materials enable low-power memory devices by leveraging the electric control of magnetization. The discovery of ferroelectricity in doped hafnia has unlocked further opportunities since the distinct ferroelectric switching mechanism in this material can enable robust and multilevel modulation of magnetization by electric field, if combined with appropriate magnetic materials. Here, we demonstrate a 5% electric field-induced modulation of the saturation magnetization in a cobalt layer, driven by ferroelectric switching of an adjacent epitaxial La(1%):Hf0.5Zr0.5O2 film. Dichroic imaging with synchrotron radiation confirms that ferroelectric switching induces a magnetic change. We show that the response time is faster than 500 ns (limited by the setup time resolution threshold) and that energy consumption is 6 nJ. This low energy consumption is mainly enabled by the absence of relevant leakage current contribution (10 nA/cm2 at 500 mV). The found response time and energy-efficient behavior point to the presence of an electronically driven modulation of magnetism (i.e., conventional magnetoelectric effects), which is confirmed by theoretical calculations and compositional analysis. Additionally, a multilevel magnetoelectric response is observed, enabling neuromorphic-like behavior. The demonstration of magnetoelectric coupling in a system based on CMOS-compatible materials offers a viable route toward the development of low-power beyond von-Neumann technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Leveraging the integration of perovskite BaTiO3 on ferroelectric fluorite HfO2 to enhance energy storage cyclability and efficiency

  • Dong, Wenjing
  • Magén, César
  • Zou, Jingye
  • Quintana, Alberto
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Silva, José P.B.
  • Sánchez, Florencio
  • Fina, Ignasi
Perovskite relaxor ferroelectrics and antiferroelectrics have been the workhorse materials for energy storage electrostatic devices. Recently, there has been growing interest in ferroelectric HfO2, which is highly compatible with fabrication processes of the electronics industry and scalable down to the ultrathin limit. However, wake-up and fatigue phenomena in ferroelectric HfO2 can limit the stability of energy storage capacity upon cycling. Interface engineering using simple AxOy (Ir, Ce, Ru, Al, La and Zr) binary oxides as capping layers is a promising strategy to mitigate these effects, but previous works have focused on optimizing high remanent polarization for memory applications. In contrast, for energy storage applications, the optimal parameters differ from those required for memory devices. Therefore, alternatives to AxOy capping layers must be investigated. Here, we demonstrate that the integration of the perovskite ferroelectric BaTiO3 with the fluorite ferroelectric Hf0.5Zr0.5O2 yields highly stable energy storage density and enhanced efficiency over cycling and at high temperatures. We study a set of samples combining epitaxial Hf0.5Zr0.5O2 grown on Si(001) with polycrystalline BaTiO3 of various thicknesses. The ferroelectricity of Hf0.5Zr0.5O2 is preserved and the efficiency is enhanced without compromising the high breakdown voltage. The device performance is optimal for a BaTiO3 thickness of 10 nm, exhibiting an energy storage density of 100 J/cm3, efficiency of 80 % and breakdown field of 12 MV/cm. We attribute this remarkable performance to the distinct electrical properties of BaTiO3 compared with previously investigated AxOy capping layers. The investigations are carried out on a system that combines memory and energy storage properties, enabling the design of prospective devices in which energy recovery and memory functionalities are integrated at the chip level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mechanical and electrical properties of a nano-gap or how to play the nano-accordion

  • Hettler, Simon
  • Arenal, Raul
In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar insitu TEM device, which was prepared with the aim to analyze the relationship between (thermo) electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices’ electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents with internal field strengths of up to 37 kV m−1 . These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tuning the Nonlinear Optical Properties of MoS <sub>2</sub> by Interfacing with Bay- or Imide-Substituted Perylene Diimides

  • Nikoli, Eleni
  • Canton-Vitoria, Ruben
  • Skentzos, Georgios
  • Pramatioti, Efrosyni
  • Zink-Lorre, Nathalie
  • Gutiérrez-Vílchez, Ana Maria
  • Fernández-Lázaro, Fernando
  • Arenal, Raul
  • Couris, Stelios
  • Tagmatarchis, Nikos
We have investigated the tuning of nonlinear optical (NLO) properties in semiconducting MoS2 nanosheets through covalent functionalization with bay- or imide-substituted perylene diimide (PDI) derivatives. Five MoS2–PDI hybrid nanomaterials 1a–5a were synthesized by attaching PDI variants featuring azobenzene or other substituents, characterized via Raman, IR, TGA, STEM-EDS, ultraviolet–visible (UV–vis), photoluminescence, and electrochemical analyses, and evaluated for NLO response under nanosecond (4 ns, 1064/532 nm) and femtosecond (70 fs, 800/400 nm) laser excitations. The hybrids exhibit enhanced and tunable NLO-absorptive (switching from saturable to reverse-saturable absorption with intensity) and NLO-refractive (self-focusing) responses compared to exfoliated MoS2, with 1a and 2a (azobenzene-substituted PDIs) showing the strongest effects due to efficient electron-transfer and -resonant excitations. Hybrids demonstrate superior NLO susceptibility (χ3) values, particularly under resonant 532 nm excitation, with Im{χ3} values of up to −514.7 ± 57.4 × 10–13 esu·mL/mg for 2a at low intensities, attributed to Pauli blocking, defect states, and two-photon processes. Hybrids having bay-substituted PDIs grafted on MoS2 enhance conjugation and performance over imide variants, enabling applications in optical-limiting, mode-locking, and photonic devices. Threshold intensities for NLA switching (150–250 MW/cm2) exceed those of MoS2, highlighting the stability for high-power uses. The developed hybrid materials advance two-dimensional transition-metal dichalcogenide-based optoelectronics by overcoming light–matter interaction limits through molecular antenna effects from PDIs. The study underscores the substituent position and azobenzene integration as levers for NLO optimization in hybrid nanoarchitectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

F-diamane synthesis through ball-milling exfoliation of fluorinated expandable graphite

  • Haddad, G.
  • Nomède-Martyr, N.
  • Bilas, P.
  • Furqan, M.
  • Reveret, F.
  • Bourgogne, D.
  • Petit, E.
  • Sarr, M.
  • Radescu, S.
  • Arenal, R.
  • Chen, S
  • Dubois, M.
Diamane, a two-dimensional diamond-like nanomaterial, has gained significant attention due to its outstanding physicochemical properties and potential applications in nanoelectronics, optics, energy devices, and quantum technologies. Here, we report a rapid, scalable method to produce fluorinated diamane (F-diamane) nanosheets via mechanical grinding in liquid media, using pre-exfoliated graphite fluoride enriched in (C2F)n to enhance yield. Comprehensive characterization confirms the formation of F-diamane-type materials. DFT calculations reveal that its superior mechanical strength and rigidity compared to fluorographene, combined with the higher stiffness of (C2F)n and the easier exfoliation of (CF)n, drive phase enrichment during processing, ultimately increasing the F-diamane content in the dispersions. The photoluminescence properties with a maximum emission when the excitation wavelength is 325 nm. Moreover, the band gap of F-diamane-type layers is found at 3.84 eV.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrathin tungsten films enabling enhanced electrical response to spin currents

  • Morales-Aragonés, José Ignacio
  • Groen, Inge
  • Hueso, Luis E
  • Casanova, Fèlix
  • Pardo, José Ángel
  • Sánchez-Azqueta, Carlos
  • De Teresa, José María
  • Sangiao, Soraya
The efficient detection of spin currents is crucial for the development of next-generation spintronic devices. Here, we demonstrate that ultrathin W layers, with thicknesses down to 2 nm—equivalent to only four atomic planes—allow for highly efficient spin-to-charge conversion. From spin pumping experiments in YIG/W bilayers, we analyzed the inverse spin Hall effect (SHE) voltage dependence on W thickness and extracted a spin Hall conductivity of σSH = −1.14(6) × 105 Ω −1 m−1, yielding effective spin Hall angles ranging from −0.27(4) to −0.88(4) over the investigated thickness range. Furthermore, assuming the Elliott–Yafet spin scattering mechanism dominates, we estimate a spin diffusion length λsd = 4.3(5) × 10−15Ωm2/ρW, where the W resistivity ρW is strongly dependent on thickness. Structural characterization, together with roomtemperature electrical resistivity measurements and the high spin-to-charge conversion efficiency observed, confirms the stabilization of the β-phase in these ultrathin W layers. We demonstrate that the monotonic increase of the inverse SHE voltage with decreasing W thickness persists down to 2-nm-thick W layer, reflecting the extremely short spin diffusion length. This allows for efficient spin-current detection in W layers below 5 nm, effectively doubling the voltage output at half the thickness. In the thinnest sample, a continuous 2-nm-thick W layer, the generated voltage exceeds 0.5 mV—well within the operating range of conventional electronics. These findings demonstrate not only the feasibility of spin-current detection in ultrathin W, but also its compatibility with conventional electronics. They highlight the strong potential of integrating ultrathin W layers with high-quality YIG films for the development of energy-efficient spintronic devices and sensors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Intercalated carbon nanotube fibers with high specific electrical conductivity

  • de Isidro-Gómez, A. I.
  • Vassilev-Galindo, V.
  • Mikhalchan, A.
  • Pelaez-Fernandez, M.
  • LLorca, J.
  • Arenal, R.
  • Vilatela, J. J.
Translating the conductivity of individual carbon nanotubes into practical, macroscopic conductors remains a challenge. We report highly aligned fibers of double-walled carbon nanotubes intercalated with chains of tetrachloroaluminate anions (AlCl4−) in the intertube channels. The AlCl4− intercalant acts as a noncovalent dopant, accepting 0.65 electrons per anion, mostly from the outer nanotube layer. Combined with a 17% intercalant volume fraction, it produces an increase in room-temperature conductivity to values as high as 24.5 mega-Siemens per meter, which is 41% of that of copper. Specific conductivity values reach 17,345 Siemens-meter squared per kilogram, which is superior to that of metals. These fibers are five times stronger and half the weight of conventional overhead cables while remaining stable in dry conditions and retaining 80% of their conductivity protected from moisture by a cable polymer sheath.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • De Teresa, José María
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Application of Ag-Enriched Nanostructures Through Ga+ Irradiation of Silver Butyrate Films in Surface-Enhanced Raman Spectroscopy (SERS)

  • Ocaña-Parral, Juan Ignacio
  • Herrer, Lucía
  • Tejedor, Inés
  • Salvador-Porroche, Alba
  • Barth, Sven
  • Cea, Pilar
  • Sangiao, Soraya
  • De Teresa, José María
Spin-coated films based on silver butyrate precursor solutions are submitted to focused Ga+ irradiation for the direct fabrication of Ag-enriched nanostructures. We report that, through the optimization of the solutions’ concentration, the spin-coating conditions, and the irradiation parameters, Ag-enriched patterned films with a tunable microstructure are obtained. In the case of a microstructure consisting of large and continuous Ag-enriched platelets, the patterned film is metallic, with resistivity down to 90 µΩ·cm. In the case of a microstructure consisting of small and discontinuous Ag-enriched nanoparticles, the corresponding patterned film is found to be suitable as a Surface-Enhanced Raman Spectroscopy (SERS) substrate. As proof of concept, the SERS signals produced by thiophenol solutions are measured and compared to a rough Ag film grown by sputtering, leading to a 200 times higher signal. Given the low Ga+ irradiation fluence required to produce tunable Ag nanostructures with metallic or SERS functionality, the obtained results highlight the potential of silver butyrate precursor solutions for the high-throughput printing of a nanomaterial with applications in nanoelectronics (metallic interconnects) and nanophotonics (SERS substrates).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Controlled one-pot fluorination for F, B, S or N tri-doping of graphene

  • Eraky, Mostafa S.
  • Haddad, Guillaume
  • Clavier, Batiste
  • Furqan, Mohammad
  • Batisse, Nicolas
  • Fahrat, Hani
  • Petit, Elodie
  • Flahaut, Emmanuel
  • Page, Alister J.
  • Liu, Chengyi
  • Chen, Sam
  • Arenal, Raul
  • Dubois, Marc
Heteroatom doping of graphene effectively modifies surface charge, defect density, and electronic structure, with multi-heteroatom co-doping enhancing bond polarization, charge redistribution, and electrochemical performance for advanced energy storage, conversion, and other technological applications. In this work, we report a one-step synthesis of di- and tri-doped graphene via the simultaneous incorporation of fluorine and boron into pristine as well as S- and N-doped graphene, starting from commercially available N- or S-doped graphene. Mild gas–solid fluorination was performed using elemental fluorine diluted in an inert nitrogen atmosphere at controlled temperatures. The presence of a boron-containing precursor enables the in situ generation of BF3, which acts as an effective boron-doping agent during the fluorination process. This approach allows, for the first time, the controlled synthesis of F/B/S-, and F/B/N- tri-doped graphene materials through a single-step reaction. The doping mechanisms and structural evolution were elucidated using complementary characterization techniques, including Fourier-transform infrared (FTIR) spectroscopy, solid-state nuclear magnetic resonance (NMR) spectroscopy (19F, 11B and 13C), thermogravimetric analysis (TGA) coupled with mass spectrometry (MS) and infrared spectroscopy (IR), and X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and (scanning)transmission electron microscopy ((S)TEM). The results demonstrate that hexagonal boron nitride and molecular fluorine act as precursors for the in situ generation of BF3, which, together with F2, enables efficient and homogeneous incorporation of fluorine and boron into heteroatom-doped graphene carbon frameworks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly Transparent Gallium-Doped Zinc Oxide Nanosheets Enabling Stable All-in-One Red-Green-Blue Photodetectors with High Responsivity

  • Meelab, Vivid
  • Canton-Vitoria, Ruben
  • Furqan, Mohammad
  • Morita, Yoshinori
  • Morita, Shu
  • Yamamoto, Eisuke
  • Kobayashi, Makoto
  • Arenal, Raul
  • Osada, Minoru
Two-dimensional zinc oxide nanosheets are attractive building blocks for ultrathin optoelectronic devices because of their high optical transparency and chemical stability; yet their weak visible-light response has hindered practical applications. Here, we demonstrate gallium-doped zinc oxide nanosheets as highly transparent and thermally robust platforms for all-in-one red-green-blue photodetectors. Gallium-doped nanosheets are synthesized via ionic layer epitaxy with precise compositional control. Structural, optical, and electrical analyses reveal that gallium doping concurrently enhances multiple properties, leading to improved photodevice performance. Gallium-doped zinc oxide nanosheets exhibit responsivities of up to 800 A W–1, carrier mobilities of 1.94 cm2 V–1s–1, and an average visible transmittance of 99.995% per nanosheet, enabling broadband photodetection without sacrificing optical throughput. Owing to their solution processability, the nanosheets can be vertically assembled into Bayer-like stacked architectures that decode red, green, and blue signals within a single pixel. Notably, the stacked photodetectors maintain stable photoresponse and excellent thermal and oxidative stability up to 450 °C, highlighting their promise for high-density, ultracompact color imaging technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis, Characterization, and Optical Properties of Undoped and Te-Doped W(SxSe(1−x))2 and Core-Shell WS2@W(SxSe(1−x))2 Nanotubes

  • Nathaniel Immanuel, Philip
  • Prasad, Neena
  • Puravankara, Akshay
  • Kusak, Stepan
  • Rosentsveig, Rita
  • Feldman, Yishay
  • Eden-Kossoy, Anna
  • Kaplan-Ashiri, Ifat
  • Kundrat, Vojtech
  • Arenal, Raul
  • Tenne, Reshef
  • Yadgarov, Lena
WS2 nanotubes (NTs) are layered transition-metal dichalcogenides whose diameter strongly influences strain and optical properties. Alloying sulfur with selenium in W(SxSe1−x)2 NTs provides compositional tunability, yet the link between precursor composition, alloy formation, and optical response remains unclear. In this work, W(SxSe1−x)2 (WSSe) NTs with controlled S/Se ratios were synthesized and characterized using Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, STEM-EDS, and X-ray diffraction. The synthesis produced high yields of small-diameter NTs (<30 nm). Compositional analysis revealed sulfur enrichment relative to the nominal precursor ratio, while the interlayer spacing increased from 0.62 to 0.66 nm with increasing selenium content. To examine incorporation of heavier chalcogens, tellurium (Te) was introduced during synthesis. Owing to its larger atomic radius and lower chemical reactivity compared with sulfur and selenium, Te incorporation presents a significant kinetic limitation during NT growth. Elemental analysis shows that Te is incorporated only at trace dopant levels (<1 at%) rather than forming a quaternary alloy phase. Despite this low incorporation, Te doping induces a measurable red shift of the A-exciton transition, indicating a slight reduction in bandgap energy. Core–shell WS2@WSSe NTs were also synthesized, exhibiting nonlinear optical effects. These findings may enable alloyed TMD NTs for nanoscale optoelectronic and photodetection devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Copper(I) Oxo Species in Cu/ZnO Catalysts and Its Role in the Methanol Synthesis from CO2 Hydrogenation

  • Soriano, J.
  • Fo, Y.
  • Gómez, D.
  • Nieto, J.M. López
  • Roy, A.
  • Manzorro, R.
  • Arenal, R.
  • Calvino, J.J.
  • Song, W.
  • Concepción, P.
This study reveals the presence of low-atomicity copper(I) oxo clusters strongly anchored to ZnO in commercial-type Cu/ZnO catalysts that, coexisting with metallic copper nanoparticles, play a critical role in CO2 hydrogenation. Their detection is challenging because metallic copper nanoparticles dominate the catalyst surface and these clusters appear in low amounts. Nevertheless, definitive evidence of their existence comes from the combination of in situ Raman spectroscopy, temperature-programmed CO surface reaction (TPSR-CO), time-resolved kinetic studies, and advance microscopy studies (STEM-XEDS and STEM-EELS). Catalytic studies combined with density functional theory (DFT) calculations demonstrate its critical role in methanol production and their size-dependent contribution to the total activity compared to traditional Cu-ZnO interfacial sites. According to DFT studies, CO2 adsorption is significantly more favorable on small Cu14O7 and Cu32O16 clusters than on extended Cu2O (111) (110) facets, metallic copper, or conventional metal-support interfacial sites. Moreover, the stabilization of carboxyl rather than formate-like intermediates follows a similar trend than the methanol production, being preferential on small Cu14O7 and Cu32O16 clusters, underlying a carboxyl-type intermediate path in methanol production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Investigation of the chemical structure of core–shell Fe3O4@Ni1−xCoxFe2O4 nanoparticles and its influence on their magnetic properties

  • Lopez-Martin, Raul
  • Makarchuk, Iryna
  • Choueikani, Fadi
  • Hettler, Simon
  • Arenal, Raul
  • De Toro, Jose A.
  • Pichon, Benoit P.
Core–shell ferrite nanoparticles offer a promising route toward high-performance, rare-earth-free magnetic nanomaterials, yet fine control over interfacial exchange coupling remains a critical challenge. Here, we report the synthesis of Fe3O4@Ni1−xCoxFe2O4 nanoparticles via a two-step seed-mediated thermal decomposition process in organic media, enabling systematic tuning of the shell composition and size of the pristine Fe3O4 nanoparticles. High-resolution scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) analyses confirm the formation of an epitaxial spinel shell, with excellent crystallographic continuity and homogeneous spatial cation distribution. X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) reveal that Co2+ and Ni2+ cations preferentially occupy octahedral sites while a minor -but significant-Ni1−xCoxO wüstite phase forms at the periphery, as also suggested by microscopy, introducing small exchange-bias effects. Alongside the exchange bias effect, a comprehensive magnetic characterization using SQUID magnetometry revealed the role of both the shell composition and the surface anisotropy, the latter being dominant over the shell composition when the core nanoparticle size was reduced. This multi-technique study unveils the formation mechanism of such core–shell bimagnetic nanoparticles and the intricate interplay between composition, interface structure, and magnetic behavior. It provides a potential framework for designing chemically engineered, anisotropy-tailored magnetic nanostructures for spintronic, biomedical, and high-density data storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Stepwise seed-mediated growth of multiphase spinel@Wüstite Core–Shell nanoparticles with exchange-coupled magnetic properties

  • Sartori, Kevin
  • Choueikani, Fadi
  • Hettler, Simon
  • Arenal, Raul
  • Pichon, Benoit P.
A series of exchange-coupled magnetic nanoparticles featuring multiple magnetic phases arranged in a core-shell architecture was synthesized through a three-step seed-mediated growth process. Iron, cobalt, and nickel precursors were sequentially thermally decomposed in high-boiling-point solvents (approximately 300 °C), enabling the successive growth of CoO and NiO shells on Fe₃O₄ nanoparticle's cores. The structural and chemical characteristics of these nanoparticles were thoroughly investigated using a combination of advanced analytical techniques, including scanning transmission electron microscopy (STEM) in high-angle annular dark-field imaging mode (HAADF), electron energy-loss spectroscopy STEM (EELS-STEM), and X-ray magnetic circular dichroism (XMCD). After each thermal decomposition step, the nanoparticle size progressively increased, accompanied by noticeable changes in morphology, indicating significant surface reconstruction. Furthermore, the chemical structure proved to be more complex than initially anticipated. The high synthesis temperature promoted cation interdiffusion at the interfaces as well as partial dissolution–recrystallization processes at the nanoparticle surface. An intermixed Co/Ni shell, composed of a combination of wüstite and spinel phases, was found to influence the magnetic properties of the nanoparticles through exchange bias coupling. This effect is directly correlated with the relative proportions of Co and Ni cations incorporated within the shell.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis of chiral magnetic graphene nanoribbons on ferromagnetic EuAu2

  • Serrate, David
  • Peláez-Sifonte, Eliecer
  • López-Tejeira, Fernando
  • Fernández, Laura
  • Romero-Lara, Francisco
  • Vaxevani, Katerina
  • Schiller, Frederick
Low-dimensional carbon-based materials can show intrinsic magnetism associated with p-electrons. Besides, they can be fabricated with atomic precision by on-surface synthesis methods. This makes them appealing alternatives to overcome the limitations of traditional magnetic materials in fields like quantum devices or spintronics. A paramount example is graphene nanoribbons, which have been recently shown to display intrinsic extended magnetic ordering of their edge states [J. Brede, N. Merino-Díez, A. Berdonces-Layunta et al., Nature Commun. 14, 6677 (2023)] and to host spin moments with well-defined quantum states [A. Domínguez-Celorrio, L. Edens, S. Sanz et al., Nature Commun. 16, 5632 (2025)]. However, their spin state is determined by electron occupancy and spin exchange interactions, which can be tuned by the choice of a suitable substrate. In this work, we synthesize chiral graphene nanoribbons with a length of 3.5¿nm on the monolayer alloy EuAu2 grown on Au(111). By means of spin-resolved scanning tunneling microscopy and spectroscopy, we confirm the ferromagnetic state of the EuAu2 and unveil the electron-doped charge state of the nanoribbons.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Measurement of piezoresistivity in self-standing nanowires fabricated by focused electron beam-induced deposition

  • Pruchnik, Bartosz
  • Kwoka, Krzysztof
  • Piasecki, Tomasz
  • Sangiao, Soraya
  • De Teresa, José M
  • Putek, Piotr
  • Gacka, Ewelina
  • Badura, Dominik
  • Sierakowski, Andrzej
  • Janus, Pawel
  • Gotszalk, Teodor
Nanowires (NWs) exhibit distinct mechanical and electrical properties compared to bulk materials, with giant piezoresistive effect—characterized by exceptionally high gauge factors (GFs)—being of particular interest for nanoscale sensing applications. Precise characterization of this effect in focused electron beam-induced deposition (FEBID) NWs remains limited. Here we investigate the piezoresistive behavior of FEBID NWs composed of platinum–carbon, tungsten–carbon, and cobalt using a four-point measurement setup integrated within operational microelectromechanical systems inside a scanning electron microscope. FEBID NWs are fabricated as self-standing devices, grown bottom-up and contacted in the same nanometrological setup. Our results reveal a giant piezoresistive effect in tungsten–carbon NWs, exhibiting GFs exceeding 10 000, while cobalt NWs show moderate sensitivity and platinum–carbon NWs display no clear piezoresistive response. These findings demonstrate the potential of FEBID-fabricated NWs, particularly tungsten–carbon, for high-sensitivity strain sensing, advancing the development of nanoscale piezoresistive devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Coupling of Ferroelectric Polarization and Oxygen Vacancy Migration Enables Electrically Controlled Thermal Memories

  • Barneo, Dídac
  • Royo, Miquel
  • Ramos, Rafael
  • Carrete, Jesús
  • Romero-Bernad, Hugo
  • Jiménez, Ricardo
  • Leborán, Víctor
  • Magén, César
  • Varela-Domínguez, Noa
  • Algueró, Miguel
  • Rurali, Riccardo
  • Pardo, José A.
  • Rivadulla, Francisco
  • Langenberg, Eric
Here we investigate epitaxial Hf0.5Zr0.5O2 ferroelectric thin films as potential candidates to be used as non-volatile electric-field-modulated thermal memories. The electric-field dependence of the thermal conductivity of metal/Hf0.5Zr0.5O2/Y2O3:ZrO2 devices is found to be hysteretic—resembling a polarization vs. electric field hysteresis loop—, reaching a maximum (minimum) at large applied positive (negative) electric fields from the top metallic electrode. This dynamic thermal response is compatible with the effects of the coupling between the ferroelectric polarization and oxygen ion migration in the Hf0.5Zr0.5O2 layer, in which the oxygen vacancies are the main phonon scattering centers and the polarization acts as an electrically active ion migration barrier that creates the hysteresis. This new mechanism enables two non-volatile states: high (ON) and low (OFF) thermal conductivity states when the electric field is removed, with an ON/OFF ratio of 1.6, which can be switched with applied voltages lower than -5 and +5 V, respectively. Both the ON and OFF states exhibit high stability over time, though the switching speed is limited by ion mobility in the Y2O3:ZrO2 electrode.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hydrophobic MFI‐Type Zeolites via Alkali‐Cation‐Induced Defect Healing: Implications for Adsorbent and Catalyst Design

  • Kanteler, Christos
  • Ferri, Pau
  • Escobar-Bedia, Francisco Javier
  • Mayoral, Álvaro
  • Vidal-Moya, Alejandro
  • Kendra, Richard
  • Lei, Chen
  • Palomino, Miguel
  • Rey, Fernando
  • Grajciar, Lukáš
  • Heard, Christopher James
  • Serna, Pedro
  • Boronat, Mercedes
  • Martínez, Cristina
  • Moliner, Manuel
Here, we demonstrate that sub-stoichiometric amounts of alkali cations (Na+ and K+) critically govern defect formation during the synthesis of Silicalite-1 (MFI), enabling precise control over framework integrity and surface properties after calcination. Combining systematic synthesis studies with density functional theory (DFT) calculations and high-resolution microscopy, we reveal a defect-healing mechanism in which in situ generated NaOH or KOH species promote Si–O–Si bond rearrangement and enhance the mobility of Si(OH)4 units. This process facilitates the effective healing of T-site vacancies, yielding highly ordered, defect-free MFI frameworks. The resulting Silicalite-1 exhibits markedly enhanced hydrophobicity and superior selectivity in butanol/water separation, underscoring the decisive role of defect control in modulating adsorption and interfacial properties. Importantly, these insights are successfully extended to the synthesis of defect-free TS-1, affording highly hydrophobic Lewis acid catalysts with improved activity and selectivity in the epoxidation of 1-hexene. This environmentally friendly, straightforward, scalable approach offers a versatile pathway to produce defect-free zeolites with precisely tuned physicochemical properties, enabling the development of advanced catalytic and separation materials, especially for applications involving water or polar compounds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Volatile Memristive Devices With Tunable Temporal Dynamics For Event‐Based Sensing

  • Spithouris, Dimitrios
  • Hellwig, Johannes
  • Greatorex, Hugh
  • Wittberg, Clemens
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Chicca, Elisabetta
  • Dittmann, Regina
Volatile memristive devices with controllable temporal dynamics enable adaptation to diverse temporal coding tasks, making them attractive for low‐power neuromorphic edge applications that process asynchronous sensory streams. However, most reported volatile memristors rely on abrupt filamentary switching, suffering from high variability, unreliable operation, and the need for current compliance and forming steps. In this work, an area‐dependent volatile memristive device based on a Pt/‐//Ta stack is presented, exhibiting ionic‐based volatility and a CMOS BEOL‐compatible process flow. The device combines low variability with forming‐free, self‐compliant, rectifying operation and gradual, analog‐like switching, achieving an ON/OFF ratio of . An in‐depth experimental and physical analysis of the mechanisms governing current transport and volatile behavior is provided. By exploiting the device's rich ionic dynamics, its volatility can be systematically tuned through applied stimulus and stack engineering, yielding decay time constants from tens of milliseconds to several seconds. A reliability study, including endurance and multilevel operation, demonstrates reproducible access to distinct volatile states. Finally, it is shown how a complete system, combining the device with spiking neuron models and CMOS circuitry, could exploit its programmable temporal dynamics for event‐based vision, with the wide range of decay constants supporting multiple sensory modalities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vortex Domain Wall Imaging in a 3D Magnetic Nanotube Grown by Focused Electron Beam Induced Deposition

  • Pablo-Navarro, Javier
  • Rodríguez, Luis Alfredo
  • Gatel, Christophe
  • Andersen, Ingrid Marie
  • Snoeck, Etienne
  • De Teresa, José María
  • Magén, César
Theoretical predictions present the magnetic nanotube (MNT) as an ideal physical implementation for 3D spintronic devices due to the unique magnetization dynamics, with stable and fast domain wall (DW) motion beyond the Walker limit, given by its coreless curved topology. However, due to this heterogeneous architecture and the need to combine different synthetic methods, experimental realizations of nanometer‐size MNTs are scarce and technically complex. Here, we report for the first time the fabrication of nanometer‐scale 3D Co MNTs, synthesized by a single growth technique, namely focused electron beam induced deposition (FEBID), and thermally annealed in vacuum. Quantitative magnetic imaging of the remanent state and DW structure of a 10‐nm‐thick cylindrical Co nanotube grown on a 70‐nm‐wide vertical Pt–C nanowire template, carried out by off‐axis electron holography in an aberration‐corrected Lorentz (field‐free) transmission electron microscope, reveals the nucleation and pinning of a head‐to‐head tilted vortex DW, whose structure has been confirmed by detailed micromagnetic simulations. The direct experimental evidence of such spin configuration stabilized in MNTs opens new venues for the investigation of curvature‐driven spin textures and new technologies based on 3D nanomagnets.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Substrate compatibility of Cryo-FIBID processes with the Co2(CO)8 precursor

  • Escalante-Quiceno, A. T.
  • Magén, C.
  • De Teresa, J. M.
Cryo-FIBID (focused ion beam induced deposition at cryogenic conditions) is an advanced nanofabrication technique that enables the controlled deposition of materials with high spatial resolution by condensing a precursor on a cooled substrate before ion beam irradiation. In this study, Cryo-FIBID using a Ga+ source and the Co2(CO)8 precursor was used to deposit cobalt layers on a variety of substrates, including metals, semiconductors, insulators, and graphene, without the need for conductive coatings on insulating surfaces. The microstructural and compositional properties of the deposits were probed by means of several microscopy techniques, which indicate that the deposits consist of homogeneous and compact cobalt-based thin layers. The investigation has revealed that two deposition parameters, the initial thickness of the condensed precursor layer and the Ga+ irradiation fluence, have a significant impact on the composition, microstructure and thickness of the final deposit. Interestingly, it was found that the cobalt content in the grown deposits depends strongly on the substrate material. Whereas deposits with a high cobalt content ( 60 at.%) are produced on Si, Au and Al substrates, the use of SiO2, graphene and SrTiO3 substrates gives rise to deposits with a lower cobalt content ( 40 at.%). The set of results highlights the versatility of Cryo-FIBID toward the growth of patterned cobalt-based structures on a wide range of substrates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Site Density Governs Switching Reactivity Regimes During Aerobic C─H Oxidation in Mn Single-Atom Photocatalysts

  • Velichko, Viktoria
  • de Arriba, Agustín
  • Moutsiou, Areti
  • Inico, Elisabetta
  • Olivati, Andrea
  • Pérez-Román, Berta
  • López-Sánchez, Jesús
  • Kwon, Ik Seon
  • Tonelli, Andrea
  • Roy, Abhijit
  • De Renzi, Valentina
  • Arenal, Raul
  • Petrozza, Annamaria
  • Cavallotti, Carlo
  • Vilé, Gianvito
Understanding how the density of isolated metal sites affects the structure and function of single-atom catalysts remains a central challenge, particularly for photocatalysts based on polymeric semiconductors. In this study, we show that Mn incorporation in carbon nitride-supported single-atom photocatalysts (Mn1@CNx) triggers a regime transition without detectable Mn aggregation. At low-to-intermediate loadings, isolated Mn–Nx sites are accommodated within a partially delaminated CNx framework, promoting productive carrier trapping, oxygen activation, and selective aerobic benzylic C–H oxidation. Above a critical loading, however, Mn incorporation reorganizes the support into a distorted and densified architecture, modifies the Mn coordination environment, and shifts carrier dynamics toward unproductive recombination. Structural, spectroscopic, and computational analyses connect this transition to framework stacking, electronic disorder, and Mn-support coupling. During selective aerobic benzylic C–H oxidation, we show that this regime transition translates into a nonmonotonic activity response, in which additional isolated Mn sites become detrimental once support reorganization overrides the benefit of increased site density. Mechanistic experiments and theory support a photoinduced oxygen activation, with the productive regime enabled by the balance between isolated Mn sites and a favorable CNx trap-state landscape. These findings establish single-atom site density as a structural and photophysical design parameter for polymer-supported photocatalysts.