Skip to main content

APLICACIONES DE MATERIALES NANOESTRUCTURADOS DE ESCRITURA DIRECTA A LAS TECNOLOGIAS DIGITALES

PID2023-146451OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2023
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Focused electron beam induced deposition of magnetic tips for improved magnetic force microscopy

  • Escalante-Quiceno, Alix Tatiana
  • Vega Fernández, Victoria
  • Martín, José Ignacio
  • Hierro-Rodríguez, Aurelio
  • Hlawacek, Gregor
  • Jaafar, Miriam
  • Asenjo Barahona, Agustina
  • Magén, César
  • Teresa, José María de
The combination of focused electron beam induced deposition (FEBID) and magnetic force microscopy (MFM) has opened up new possibilities in nanoscale magnetic imaging. FEBID offers precise control over the dimensions and magnetic properties of the MFM probes, enabling the development of high-performance magnetic tips with enhanced capabilities compared to conventional ones. These improved tips offer superior resolution, sensitivity, and versatility in nanoscale magnetic surface characterization. Here, we compare the performance of a commercial MFM tip and a FEBID-grown Fe tip in a Ni80Fe20/NdCo5 film. The FEBID tip exhibited superior lateral resolution for topography imaging, likely due to its sharper and well-defined geometry, with a tip diameter of approximately 20 nm. MFM measurements further confirmed this advantage, revealing better-defined magnetic domains and higher magnetic contrast with the FEBID-functionalized probes compared to the commercial tip. This improvement can be attributed to the possibility to optimize the tip-sample magnetic interaction for the FEBID tip. By reducing the lift height of the second pass, we were able to bring the tip closer to the sample, enhancing the magnetic signal without introducing significant topographic artifacts. Overall, these findings highlight the potential of FEBID for creating high-resolution and high-sensitivity MFM tips., This research received financial support from the grants PDC2021–120852-C21 and PID2023-146451OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU/PRTR, and by Gobierno de Aragón through grant E13_23R. Authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas (LMA)” at “Universidad de Zaragoza”. Financial support through a short-term scientific mission funded by the COST Action CA19140—Focused Ion Technology for Nanomaterials, supported by COST (European Cooperation in Science and Technology) is acknowledged https://www.fit4nano.eu/. V. V. F. acknowledges the support from the Severo Ochoa Predoctoral Fellowship Program (Nos. PA-22-BP21-124). This work has been supported by Spanish MCIN/AEI/10.13039/501100011033/FEDER,UE under grant PID2022-136784NB. M. J. and A. A. acknowledge the project TED2021-130957B-C55., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

FIB-fabrication of superconducting devices based on Bi2Se3 junctions

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • Teresa, José María de
All data analyzed and presented in the current study are available from the corresponding authors on reasonable request., Recent advances in quantum technologies are highly influencing the current technological scenario. Hybrid devices combining superconductors and topological insulators represent an excellent opportunity to study the topological superconducting phase, which offers interesting features that might have significant implications in the development of quantum sensing and quantum computing. Furthermore, focused ion beam techniques, whose versatility enables to create sophisticated devices with high degree of customization, can enhance the creation of complex devices. Here, we develop a novel approach for creating single-crystal devices that is applied to the fabrication of superconducting devices based on topological insulator Bi2Se3 in a geometry characteristic of a superconducting quantum interference device. Characterization of these devices reveals that superconductivity is induced in our crystal and the supercurrent is modulated by applying an external magnetic field. These results open the way to tailoring the response of hybrid devices that combine superconductors and topological insulators by focused ion beam techniques., Authors acknowledge grants PID2020-112914RB-I00, PID2023-1464510B-I00 and CEX2023-001286-S funded by MCIN/AEI/10.13039/501100011033, CSIC, through Research Platform PTI-001 and also Gobierno de Aragón through the doctoral fellowship (R. G. A.) and the grant number E13_23R, with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2022-1634096-T) and COST-FIT4NANO (action CA19140). Authors acknowledge the Laboratory for Advanced Microscopies (LMA) and the Institute of Nanoscience and Materials of Aragón (INMA) from CSIC-Universidad de Zaragoza for offering access to their instruments and expertise. Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged, particularly thank to L. Casado for her assistance with the nanomanipulation procedures. Authors acknowledge also the Physical Measurements Service from Servicio General de Apoyo a la Investigación (SAI) - University of Zaragoza. The work at the University of Warwick was supported by EPSRC, UK through Grant EP/T005963/1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He+ and Ne+ beam nanowriting from organometallic thin films: a comparison with Ga+ and e- beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • Teresa, José María de
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution., The authors are thankful for the financial support from the Gobierno de Aragón through the grant numbers E13_23R and E31_23R, for the financial support from the grants PID2020-11223914RB-I00, PID2022-141433OB-I00 PDC2023-145810-I00, PID2023-146451OB-I00, RED2022-134096-T and TED2021-131318B-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. This research work has also been funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP). The authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas (LMA)” at “Universidad de Zaragoza”, and thefinancial support through a short-term scientific mission funded by the COST Action CA19140 – Focused Ion Technology for Nanomaterials, supported by COST (European Cooperation in Science and Technology) – https://www.fit4nano.eu/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • Teresa, José María de
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed., The authors thank the Gobierno de Aragón through the grant numbers E13_23R and E31_23R, the networks NANOLITO (RED2022-134096-T) and FIT4NANO (COST action CA19140), and the grants PID2020-11223914RB-I00, PID2023-146451OB-I00, PDC2023-145810-I00, PID2022-141433OB-I00, TED2021-131318B-I00 and Ayuda CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR. Authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». This research work has been funded by the European Commission –NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Method for extraction of microcrystals based on focused electron/ion beam processing and their magnetotransport characterization

  • Sáenz- Hernández, Amaia
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • Teresa, José María de
We propose a new in situ microfabrication method using focused electron/ion beam processing to study the influence of crystal orientation on magnetotransport properties. Previous studies obtained microcrystals extracted from bulk single crystals with the out-of-plane crystallographic axis−→c perpendicular to the applied magnetic field −→B and parallel to the current flow. The new method orients −→c parallel to −→B and perpendicular to the current. Magnetotransport measurements at 2 K on Bi2Se3 samples fabricated using both methods reveal differences in zero-field resistivity and charge carrier mobility, demonstrating the impact of the crystal orientation in which the microcrystal is extracted on the electrical transport properties., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., The authors acknowledge grant PID2020-112914RB-I00 and PID2023-146451OB-I00, funded by MCIN/AEI/https://doi.org/10.13039/501100011033, and CSIC through Research Platform PTI-001. The doctoral fellowship (A. S. H.), PRE2022-103314, associated with project CEX2021-001144-S-20–9, also from CSIC, is also acknowledged. The work at the University of Warwick was supported by EPSRC, UK, through grant EP/T005963/1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001144-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cryogenic focused ion beam milling to investigate the anisotropic magnetotransport properties of bismuth microcrystals

  • Sáenz- Hernández, Amaia
  • Sangiao, Soraya
  • Felser, Claudia
  • Shekhar, Chandra
  • Pardo, José A.
  • Ibarra, Alfonso
  • Teresa, José María de
Early View, The data that support the findings of this study are available from the corresponding author upon reasonable request., Bulk single crystals exhibit the intrinsic properties of a given compound, but studying their anisotropic magnetotransport properties is challenging. Focused Ion Beam (FIB) milling at room temperature has been previously used to guide the electrical current path along a defined crystal direction or to extract microcrystals where the electrical current flows along a known direction. However, some materials, such as bismuth, melt under FIB irradiation. Bismuth, known for its unique properties, including very large magnetoresistance and a highly anisotropic Fermi surface, reacts to room-temperature Ga+ FIB irradiation, forming droplets on its surface. Therefore, a novel microfabrication approach based on cryogenic FIB milling is developed here. By using a Peltier stage or an integrated cryogenic module, surface melting is mitigated below −30 °C. Microscale slabs are extracted, either parallel or perpendicular to the single crystal surface, then shaped and electrically contacted in a chip for magnetotransport characterization. The large magnetoresistance observed along with Shubnikov–de Haas oscillations with single periodicity when current is applied perpendicular to the c axis, highlights the success of the approach. These results enable FIB microfabrication of single crystals that are sensitive to FIB irradiation and investigation of the anisotropic magnetotransport properties in microcrystals., The authors would also like to thank the Laboratory for Advanced Microscopies (LMA) and the Institute of Nanoscience and Materials of Aragón (INMA), from CSIC–Universidad de Zaragoza, for providing access to their instruments and expertise. Additionally, the authors are grateful to the ELECMI network for granting free access through a competitive call to the Helios 650 system through project ELC529-2025. Technical support from the LMA technicians at Universidad de Zaragoza is acknowledged, with special thanks to L. Casado for her assistance with the nanofabrication procedures involving the Dual Beam system. Additionally, the Physical Measurements Service from Servicio General de Apoyo a la Investigación (SAI) at the University of Zaragoza is also acknowledged. Lastly the authors would like to acknowledge the following founding sources: grant PID2020-112914RB-I00 and PID2023-146451OB-I00, funded by MCIN/AEI/10.13039/501100011033 and CSIC through Research Platform PTI-001; the doctoral fellowship for A.S.H. PRE2022-103314, associated with the CSIC project CEX2021-001144-S-20-9, funded by MCIN/AEI/10.13039/501100011033; grant E13_23R, funded by Gobierno de Aragón; and grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001144-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular electronics meets direct-write carbon nanofabrication via focused electron-beam-induced deposition (FEBID): A platform for junction architecture design

  • García-Serrano, Aitor
  • Sangtarash, Sara
  • González-Orive, Alejandro
  • Sadeghi, Hatef
  • Martín, Santiago
  • Herrer, Lucía
  • Nichols, Richard J.
  • Low, Paul J.
  • Lambert, Colin J.
  • Teresa, José María de
  • Sangiao, Soraya
  • Cea, Pilar
The electrical characteristics of a molecular junction are highly sensitive to the nature and uniformity of the molecule|electrode contacts. This gives rise to significant interest in the development of not only the active molecular structures that modulate charge transport and the anchor groups that contact them to the electrodes, but also methods for assembling uniform molecular monolayers on a substrate electrode and subsequent fabrication of a “top electrode” to achieve the reliable fabrication of viable molecular electronic devices. In this contribution, 4-(4-(4-(trimethylsilylethynyl)phenylethynyl)phenylethynyl)aniline was converted to the corresponding diazonium salt and electrografted onto highly oriented pyrolytic graphite (HOPG), resulting in an organized monolayer covalently bonded to the HOPG “substrate” electrode. Subsequently, focused electron-beam-induced deposition was used to form an amorphous carbon top electrode (C-FEBID) onto the monolayer from a naphthalene precursor. By guiding the raster scanning of the electron beam, the position, shape, and thickness of the carbon electrode “written” onto the monolayer can be controlled with nanometer precision. In addition, as a proof-of-principle demonstration of the construction of the interconnects necessary for integration of molecular devices, platinum was deposited precisely on top of the C-FEBID electrodes, using focused-ion-beam-induced deposition of PtMe3CpMe (CpMe = η5-C5H4Me) (Pt-FIBID). The HOPG|molecule|C-FEBID|Pt-FIBID “large area” junctions produced in this manner exhibited excellent reproducibility and were free of short circuits for top-electrode dimensions ranging from 4 × 4 to 8 × 8 μm2. The electrical characteristics of these devices were measured and modeled by using quantum chemical approaches. These results illustrate alternative routes toward the fabrication of planar 2D devices based on molecular monolayers and carbon electrodes., S.M. and P.C. acknowledge grant PID2022-141433OB-I00 funded by MICIU/AEI//10.13039/501100011033 and by FEDER, UE. S.M. and P.C. also gratefully acknowledge grant TED2021-131318B-I00 funded by MICIU/AEI/10.13039/501100011033 and UE NextGenerationEU/PRTR. J.M.D.T. and So.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects, PID2023-146451OB-I00 and PDC2023-145810-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Authors (S.M., J.M.D.T., So.S., and P.C) also acknowledge support from DGA and Fondos Feder for funding Platon (E31_23) and Nanomidas (E13_23R) research groups. S.M., J.M.D.T., So.S., and P.C. acknowledge financial support from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. P.J.L. gratefully acknowledges support from the Australian Research Council (DP220100790). R.J.N. thanks EPSRC for funding (grants EP/M029522/1, EP/M005046/1, and EP/K007785/1). C.J.L. and S.S. thank the EPSRC (grant nos. EP/M014452/1 and EP/N017188/1). H.S. acknowledges UKRI for Future Leaders Fellowships MR/S015329/2 and MR/X015181/1. S.S. acknowledges EPSRC New Investigator Grant APP17327. This work is supported by the UKRI Programme grant EP/X026876/1 “QMol”. Authors acknowledge Dr. César Magen for the EELS experiment and its interpretation. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node ≪Laboratorio de Microscopias Avanzadas (LMA)≫ at ≪Universidad de Zaragoza≫., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resolving complex multiscale structure of magneto- and electroactive polymer composites with an ionic liquid

  • Shibaev, Andrey
  • Maiz, Jon
  • Petrenko, Viktor
  • Iturrospe, Amaia
  • Fernández Maestu, Josu
  • Porro, José María
  • Barrado, Mariano
  • Casado, Laura
  • Kohlbrecher, Joachim
  • Shvets, Petr
  • Modin, Evgeny
  • Castro, Ana Sofia
  • Chuvilin, Andrey
  • Teresa, José María de
  • Correia, Daniela M.
  • Arbe, Arantxa
  • Lanceros-Mendez, Senentxu
A multiscale understanding of the structure of ionogels – nanoparticle-free polymer composites incorporating ionic liquids – is essential for enhancing their macroscopic functional properties and unlocking their potential in critical applications such as energy storage, sensing, and actuation. We establish a complete picture of the nano- and microstructuration of an ionic liquid within the matrix of a practically relevant electroactive copolymer poly(vinylidenefluoride-co-trifluoroethylene), by combining neutron scattering with cryogenic scanning electron tomography assisted by focused ion beam milling and cryogenic transmission electron microscopy with elemental analysis. We show that the ionic liquid is primarily located in the polymer amorphous phase and forms nanostructures with 10–12 nm size. It does not penetrate into the crystalline lamellae or the polymer amorphous phase confined between them, and it does not affect the polymer degree of crystallinity nor its complete crystallization in the highly electroactive β-phase. Saturation of the unconfined amorphous phase with ionic liquid is identified as the key factor enabling high ionic conductivity while preserving mechanical integrity. At high ionic liquid concentrations, its excess microphase-separates during the composite processing and accumulates in predominantly interconnected micrometer-sized pores, providing the magnetoelectric response and further increasing the ionic conductivity., This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the BCMaterials on behalf of the Department of Science, Universities and Innovation of the Basque Government are acknowledged. This work was also supported by the Basque Government under the Elkartek program. Funding by project PID2022-138572OB-C42, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, is also acknowledged. J.M., A.I.I., and A.A. acknowledge the grant of Eusko Jaurlaritza, code: IT1566-22. J.M. and J. M. P. acknowledge support from the “Ramón y Cajal” Program, Grant No. RYC2023-044285-I and No. RYC2023–044841-I, respectively, funded by MICIU/AEI/10.13039/501100011033 and ESF+. J. M. also acknowledges funding from Grant No. PID2024-157277NA-I00, provided by MICIU/AEI/10.13039/501100011033 and ERDF/EU. J.M.D.T acknowledges support from grants PID2023-146451OB-I00 and CEX2023-001286-S, funded by MCIN/AEI/10.13039/501100011033, and from grant PIE 202660E127, funded by CSIC. This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/00686/2025: Chemistry Centre of the University of Minho (CQ-UM) (DOI: https://doi.org/10.54499/UID/00686/2025) and UID/04650/2025: Physics Centre of Minho and Porto Universities (CF-UM-UP) (DOI: https://doi.org/10.54499/UID/04650/2025). The project COMPETE2030-FEDER-00760700, nº16437 is also acknowledged. D.M.C. and A.S.C. also thanks the FCT for financial support in the framework of the contract 2020.02915.CEECIND/CP1600/CT0029 (DOI: https://doi.org/10.54499/2020.02915.CEECIND/CP1600/CT0029) (D.M.C.), and the fellowship 2024.01433.BD (A.S.C). The authors acknowledge the use of instrumentation as well as the technical advice provided by the national Facility ELECMI ICTS node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. The authors also thank the technical and human support provided by SGIker (EHU/ERDF, EU)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • Teresa, José María de
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms., S.M. and P.C. acknowledge grant PID2022-141433OB-I00 funded by MICIU/AEI//10.13039/501100011033 and by FEDER, UE. S.M. and P.C. also gratefully acknowledge grant TED2021-131318B-I00 funded by MICIU/AEI /10.13039/501100011033 and UE NextGenerationEU/ PRTR. J.M.D.T. and S.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects, PID2023-146451OB-I00 and PDC2023-145810-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Authors (S.M., J.M.D.T., S.S., and P.C.) also acknowledge support from DGA and Fondos FEDER for funding Platon (E31_23) and Nanomidas (E13_23R) research groups. S.M., J.M.D.T., S.S., and P.C. acknowledge financial support from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023e for Research Units, withAEI/10.13039/501100011033. A.G acknowledges the award of a DGA fellowship from the Government of Aragon. A.S.P. acknowledges funding received from project PIE202060E187 from the Spanish National Research Council (CSIC). J.M.B. acknowledges grant PID2019-105881RB-I00 and PhD Fellowship PRE2020-093409 funded by MCIU/AEI/10.13039/50110001133 and by FEDER, EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrathin tungsten films enabling enhanced electrical response to spin currents

  • Morales-Aragonés, José Ignacio
  • Groen, Ingen
  • Hueso, Luis E.
  • Casanova, Fèlix
  • Pardo, José A.
  • Sánchez-Azqueta, Carlos
  • Teresa, José María de
  • Sangiao, Soraya
The efficient detection of spin currents is crucial for the development of next-generation spintronic devices. Here, we demonstrate that ultrathin W layers, with thicknesses down to 2 nm— equivalent to only four atomic planes—allow for highly efficient spin-to-charge conversion. From spin pumping experiments in YIG/W bilayers, we analyzed the inverse spin Hall effect (SHE) voltage dependence on W thickness and extracted a spin Hall conductivity of σSH = −1.14(6)× 105 Ω−1 m−1, yielding effective spin Hall angles ranging from −0.27(4) to −0.88(4) over the investigated thickness range. Furthermore, assuming the Elliott–Yafet spin scattering mechanism dominates, we estimate a spin diffusion length λsd = 4.3(5)×10−15Ωm2/ρW, where the W resistivity ρW is strongly dependent on thickness. Structural characterization, together with roomtemperature electrical resistivity measurements and the high spin-to-charge conversion efficiency observed, confirms the stabilization of the β-phase in these ultrathin W layers. We demonstrate that the monotonic increase of the inverse SHE voltage with decreasing W thickness persists down to 2-nm-thick W layer, reflecting the extremely short spin diffusion length. This allows for efficient spin-current detection in W layers below 5 nm, effectively doubling the voltage output at half the thickness. In the thinnest sample, a continuous 2-nm-thick W layer, the generated voltage exceeds 0.5 mV—well within the operating range of conventional electronics. These findings demonstrate not only the feasibility of spin-current detection in ultrathin W, but also its compatibility with conventional electronics. They highlight the strong potential of integrating ultrathin W layers with high-quality YIG films for the development of energy-efficient spintronic devices and sensors., The authors acknowledge Grants PID2020-112914RB-I00, PID2021-122511OB-I00, PID2023-146451OB-I00, PID2023-150244OB-I00 and PID2024-155708OB-I00, funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU and Grants E13_23R, PROY_E29_24 and PROY_T33_24 funded by Gobierno de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Measurement of piezoresistivity in self-standing nanowires fabricated by focused electron beam-induced deposition

  • Pruchnik, Bartosz
  • Kwoka, Krzysztof
  • Piasecki, Tomasz
  • Sangiao, Soraya
  • Teresa, José María de
  • Putek, Piotr
  • Gacka, Ewelina
  • Badura, Dominik
  • Sierakowski, Andrzej
  • Janus, Paweł
  • Gotszalk, Teodor
Nanowires (NWs) exhibit distinct mechanical and electrical properties compared to bulk materials, with giant piezoresistive effect—characterized by exceptionally high gauge factors (GFs)—being of particular interest for nanoscale sensing applications. Precise characterization of this effect in focused electron beam-induced deposition (FEBID) NWs remains limited. Here we investigate the piezoresistive behavior of FEBID NWs composed of platinum–carbon, tungsten–carbon, and cobalt using a four-point measurement setup integrated within operational microelectromechanical systems inside a scanning electron microscope. FEBID NWs are fabricated as self-standing devices, grown bottom-up and contacted in the same nanometrological setup. Our results reveal a giant piezoresistive effect in tungsten–carbon NWs, exhibiting GFs exceeding 10 000, while cobalt NWs show moderate sensitivity and platinum–carbon NWs display no clear piezoresistive response. These findings demonstrate the potential of FEBID-fabricated NWs, particularly tungsten–carbon, for high-sensitivity strain sensing, advancing the development of nanoscale piezoresistive devices., The National Science Centre, Poland supported research with Miniatura 9 grant ‘Investigation of low-size effects affecting the piezoresistivity in nanocomposite materials’ No. 2025/09/X/ST7/01379 and PRELUDIUM-21 grant ‘Nanometrology of field emission phenomena from electron beam deposited NWs operating as nano- and picodeflection sensors—FEmet’, No. 2022/45/N/ST7/03049. Bartosz Pruchnik acknowledges support of COST action No. CA19140 ‘Focused Ion Technology for Nanomaterials—fit4nano’. Ewelina Gacka acknowledges the support of the Foundation for Polish Science within the START scholarship and the Helmholtz Association within the Helmholtz Global Fellow Program. S. S. and J. M. D. T. received financial support from the Grants PID2023-146451OB-I00 funded by MCIN/AEI/10.13039/ 501 100 011 033 and by Gobierno de Aragón through Grant E13_23 R. The authors acknowledge the use of instrumentation as well as the technical advice provided by the national Facility ELECMI ICTS node ‘Laboratorio de Microscopías Avanzadas’ at the University of Zaragoza., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He<sup>+</sup> and Ne<sup>+</sup> beam nanowriting from organometallic thin films: a comparison with Ga<sup>+</sup> and e<sup>-</sup> beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • De Teresa, José María
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • De Teresa, José María
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Method for extraction of microcrystals based on focused electron/ion beam processing and their magnetotransport characterization

  • Sáenz-Hernández, Amaia
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • De Teresa, José María
We propose a new in situ microfabrication method using focused electron/ion beam processing to study the influence of crystal orientation on magnetotransport properties. Previous studies obtained microcrystals extracted from bulk single crystals with the out-of-plane crystallographic axis [símbolo] perpendicular to the applied magnetic field [símbolo] and parallel to the current flow. The new method orients [símbolo] parallel to [símbolo] and perpendicular to the current. Magnetotransport measurements at 2 K on Bi2Se3 samples fabricated using both methods reveal differences in zero-field resistivity and charge carrier mobility, demonstrating the impact of the crystal orientation in which the microcrystal is extracted on the electrical transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cryogenic Focused Ion Beam Milling to Investigate the Anisotropic Magnetotransport Properties of Bismuth Microcrystals

  • Sáenz-Hernández, Amaia
  • Sangiao, Soraya
  • Felser, Claudia
  • Shekhar, Chandra
  • Pardo, José Ángel
  • Ibarra, Alfonso
  • De Teresa, José María
Bulk single crystals exhibit the intrinsic properties of a given compound, but studying their anisotropic magnetotransport properties is challenging. Focused Ion Beam (FIB) milling at room temperature has been previously used to guide the electrical current path along a defined crystal direction or to extract microcrystals where the electrical current flows along a known direction. However, some materials, such as bismuth, melt under FIB irradiation. Bismuth, known for its unique properties, including very large magnetoresistance and a highly anisotropic Fermi surface, reacts to room‐temperature Ga+ FIB irradiation, forming droplets on its surface. Therefore, a novel microfabrication approach based on cryogenic FIB milling is developed here. By using a Peltier stage or an integrated cryogenic module, surface melting is mitigated below −30 °C. Microscale slabs are extracted, either parallel or perpendicular to the single crystal surface, then shaped and electrically contacted in a chip for magnetotransport characterization. The large magnetoresistance observed along with Shubnikov–de Haas oscillations with single periodicity when current is applied perpendicular to the c axis, highlights the success of the approach. These results enable FIB microfabrication of single crystals that are sensitive to FIB irradiation and investigation of the anisotropic magnetotransport properties in microcrystals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Molecular Electronics Meets Direct-Write Carbon Nanofabrication via Focused Electron-Beam-Induced Deposition (FEBID): A Platform for Junction Architecture Design

  • García-Serrano, Aitor
  • Sangtarash, Sara
  • González-Orive, Alejandro
  • Sadeghi, Hatef
  • Martín, Santiago
  • Herrer, Lucía
  • Nichols, Richard J.
  • Low, Paul J.
  • Lambert, Colin J.
  • de Teresa, José María
  • Sangiao, Soraya
  • Cea, Pilar
The electrical characteristics of a molecular junction are highly sensitive to the nature and uniformity of the molecule|electrode contacts. This gives rise to significant interest in the development of not only the active molecular structures that modulate charge transport and the anchor groups that contact them to the electrodes, but also methods for assembling uniform molecular monolayers on a substrate electrode and subsequent fabrication of a “top electrode” to achieve the reliable fabrication of viable molecular electronic devices. In this contribution, 4-(4-(4-(trimethylsilylethynyl)phenylethynyl)phenylethynyl)aniline was converted to the corresponding diazonium salt and electrografted onto highly oriented pyrolytic graphite (HOPG), resulting in an organized monolayer covalently bonded to the HOPG “substrate” electrode. Subsequently, focused electron-beam-induced deposition was used to form an amorphous carbon top electrode (C-FEBID) onto the monolayer from a naphthalene precursor. By guiding the raster scanning of the electron beam, the position, shape, and thickness of the carbon electrode “written” onto the monolayer can be controlled with nanometer precision. In addition, as a proof-of-principle demonstration of the construction of the interconnects necessary for integration of molecular devices, platinum was deposited precisely on top of the C-FEBID electrodes, using focused-ion-beam-induced deposition of PtMe3CpMe (CpMe = η5-C5H4Me) (Pt-FIBID). The HOPG|molecule|C-FEBID|Pt-FIBID “large area” junctions produced in this manner exhibited excellent reproducibility and were free of short circuits for top-electrode dimensions ranging from 4 × 4 to 8 × 8 μm2. The electrical characteristics of these devices were measured and modeled by using quantum chemical approaches. These results illustrate alternative routes toward the fabrication of planar 2D devices based on molecular monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Resolving Complex Multiscale Structure of Magneto‐ and Electroactive Polymer Composites With an Ionic Liquid

  • Shibaev, Andrey
  • Maiz, Jon
  • Petrenko, Viktor
  • Iturrospe, Amaia
  • Fernández Maestu, Josu
  • Porro, José María
  • Barrado, Mariano
  • Casado, Laura
  • Kohlbrecher, Joachim
  • Shvets, Petr
  • Modin, Evgeny
  • Castro, Ana Sofia
  • Chuvilin, Andrey
  • De Teresa, José María
  • Correia, Daniela M.
  • Arbe, Arantxa
  • Lanceros-Méndez, Senentxu
A multiscale understanding of the structure of ionogels – nanoparticle-free polymer composites incorporating ionic liquids – is essential for enhancing their macroscopic functional properties and unlocking their potential in critical applications such as energy storage, sensing, and actuation. We establish a complete picture of the nano- and microstructuration of an ionic liquid within the matrix of a practically relevant electroactive copolymer poly(vinylidenefluoride-co-trifluoroethylene), by combining neutron scattering with cryogenic scanning electron tomography assisted by focused ion beam milling and cryogenic transmission electron microscopy with elemental analysis. We show that the ionic liquid is primarily located in the polymer amorphous phase and forms nanostructures with 10–12 nm size. It does not penetrate into the crystalline lamellae or the polymer amorphous phase confined between them, and it does not affect the polymer degree of crystallinity nor its complete crystallization in the highly electroactive β-phase. Saturation of the unconfined amorphous phase with ionic liquid is identified as the key factor enabling high ionic conductivity while preserving mechanical integrity. At high ionic liquid concentrations, its excess microphase-separates during the composite processing and accumulates in predominantly interconnected micrometer-sized pores, providing the magnetoelectric response and further increasing the ionic conductivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrathin tungsten films enabling enhanced electrical response to spin currents

  • Morales-Aragonés, José Ignacio
  • Groen, Inge
  • Hueso, Luis E
  • Casanova, Fèlix
  • Pardo, José Ángel
  • Sánchez-Azqueta, Carlos
  • De Teresa, José María
  • Sangiao, Soraya
The efficient detection of spin currents is crucial for the development of next-generation spintronic devices. Here, we demonstrate that ultrathin W layers, with thicknesses down to 2 nm—equivalent to only four atomic planes—allow for highly efficient spin-to-charge conversion. From spin pumping experiments in YIG/W bilayers, we analyzed the inverse spin Hall effect (SHE) voltage dependence on W thickness and extracted a spin Hall conductivity of σSH = −1.14(6) × 105 Ω −1 m−1, yielding effective spin Hall angles ranging from −0.27(4) to −0.88(4) over the investigated thickness range. Furthermore, assuming the Elliott–Yafet spin scattering mechanism dominates, we estimate a spin diffusion length λsd = 4.3(5) × 10−15Ωm2/ρW, where the W resistivity ρW is strongly dependent on thickness. Structural characterization, together with roomtemperature electrical resistivity measurements and the high spin-to-charge conversion efficiency observed, confirms the stabilization of the β-phase in these ultrathin W layers. We demonstrate that the monotonic increase of the inverse SHE voltage with decreasing W thickness persists down to 2-nm-thick W layer, reflecting the extremely short spin diffusion length. This allows for efficient spin-current detection in W layers below 5 nm, effectively doubling the voltage output at half the thickness. In the thinnest sample, a continuous 2-nm-thick W layer, the generated voltage exceeds 0.5 mV—well within the operating range of conventional electronics. These findings demonstrate not only the feasibility of spin-current detection in ultrathin W, but also its compatibility with conventional electronics. They highlight the strong potential of integrating ultrathin W layers with high-quality YIG films for the development of energy-efficient spintronic devices and sensors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • De Teresa, José María
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Application of Ag-Enriched Nanostructures Through Ga+ Irradiation of Silver Butyrate Films in Surface-Enhanced Raman Spectroscopy (SERS)

  • Ocaña-Parral, Juan Ignacio
  • Herrer, Lucía
  • Tejedor, Inés
  • Salvador-Porroche, Alba
  • Barth, Sven
  • Cea, Pilar
  • Sangiao, Soraya
  • De Teresa, José María
Spin-coated films based on silver butyrate precursor solutions are submitted to focused Ga+ irradiation for the direct fabrication of Ag-enriched nanostructures. We report that, through the optimization of the solutions’ concentration, the spin-coating conditions, and the irradiation parameters, Ag-enriched patterned films with a tunable microstructure are obtained. In the case of a microstructure consisting of large and continuous Ag-enriched platelets, the patterned film is metallic, with resistivity down to 90 µΩ·cm. In the case of a microstructure consisting of small and discontinuous Ag-enriched nanoparticles, the corresponding patterned film is found to be suitable as a Surface-Enhanced Raman Spectroscopy (SERS) substrate. As proof of concept, the SERS signals produced by thiophenol solutions are measured and compared to a rough Ag film grown by sputtering, leading to a 200 times higher signal. Given the low Ga+ irradiation fluence required to produce tunable Ag nanostructures with metallic or SERS functionality, the obtained results highlight the potential of silver butyrate precursor solutions for the high-throughput printing of a nanomaterial with applications in nanoelectronics (metallic interconnects) and nanophotonics (SERS substrates).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Measurement of piezoresistivity in self-standing nanowires fabricated by focused electron beam-induced deposition

  • Pruchnik, Bartosz
  • Kwoka, Krzysztof
  • Piasecki, Tomasz
  • Sangiao, Soraya
  • De Teresa, José M
  • Putek, Piotr
  • Gacka, Ewelina
  • Badura, Dominik
  • Sierakowski, Andrzej
  • Janus, Pawel
  • Gotszalk, Teodor
Nanowires (NWs) exhibit distinct mechanical and electrical properties compared to bulk materials, with giant piezoresistive effect—characterized by exceptionally high gauge factors (GFs)—being of particular interest for nanoscale sensing applications. Precise characterization of this effect in focused electron beam-induced deposition (FEBID) NWs remains limited. Here we investigate the piezoresistive behavior of FEBID NWs composed of platinum–carbon, tungsten–carbon, and cobalt using a four-point measurement setup integrated within operational microelectromechanical systems inside a scanning electron microscope. FEBID NWs are fabricated as self-standing devices, grown bottom-up and contacted in the same nanometrological setup. Our results reveal a giant piezoresistive effect in tungsten–carbon NWs, exhibiting GFs exceeding 10 000, while cobalt NWs show moderate sensitivity and platinum–carbon NWs display no clear piezoresistive response. These findings demonstrate the potential of FEBID-fabricated NWs, particularly tungsten–carbon, for high-sensitivity strain sensing, advancing the development of nanoscale piezoresistive devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vortex Domain Wall Imaging in a 3D Magnetic Nanotube Grown by Focused Electron Beam Induced Deposition

  • Pablo-Navarro, Javier
  • Rodríguez, Luis Alfredo
  • Gatel, Christophe
  • Andersen, Ingrid Marie
  • Snoeck, Etienne
  • De Teresa, José María
  • Magén, César
Theoretical predictions present the magnetic nanotube (MNT) as an ideal physical implementation for 3D spintronic devices due to the unique magnetization dynamics, with stable and fast domain wall (DW) motion beyond the Walker limit, given by its coreless curved topology. However, due to this heterogeneous architecture and the need to combine different synthetic methods, experimental realizations of nanometer‐size MNTs are scarce and technically complex. Here, we report for the first time the fabrication of nanometer‐scale 3D Co MNTs, synthesized by a single growth technique, namely focused electron beam induced deposition (FEBID), and thermally annealed in vacuum. Quantitative magnetic imaging of the remanent state and DW structure of a 10‐nm‐thick cylindrical Co nanotube grown on a 70‐nm‐wide vertical Pt–C nanowire template, carried out by off‐axis electron holography in an aberration‐corrected Lorentz (field‐free) transmission electron microscope, reveals the nucleation and pinning of a head‐to‐head tilted vortex DW, whose structure has been confirmed by detailed micromagnetic simulations. The direct experimental evidence of such spin configuration stabilized in MNTs opens new venues for the investigation of curvature‐driven spin textures and new technologies based on 3D nanomagnets.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Substrate compatibility of Cryo-FIBID processes with the Co2(CO)8 precursor

  • Escalante-Quiceno, A. T.
  • Magén, C.
  • De Teresa, J. M.
Cryo-FIBID (focused ion beam induced deposition at cryogenic conditions) is an advanced nanofabrication technique that enables the controlled deposition of materials with high spatial resolution by condensing a precursor on a cooled substrate before ion beam irradiation. In this study, Cryo-FIBID using a Ga+ source and the Co2(CO)8 precursor was used to deposit cobalt layers on a variety of substrates, including metals, semiconductors, insulators, and graphene, without the need for conductive coatings on insulating surfaces. The microstructural and compositional properties of the deposits were probed by means of several microscopy techniques, which indicate that the deposits consist of homogeneous and compact cobalt-based thin layers. The investigation has revealed that two deposition parameters, the initial thickness of the condensed precursor layer and the Ga+ irradiation fluence, have a significant impact on the composition, microstructure and thickness of the final deposit. Interestingly, it was found that the cobalt content in the grown deposits depends strongly on the substrate material. Whereas deposits with a high cobalt content ( 60 at.%) are produced on Si, Au and Al substrates, the use of SiO2, graphene and SrTiO3 substrates gives rise to deposits with a lower cobalt content ( 40 at.%). The set of results highlights the versatility of Cryo-FIBID toward the growth of patterned cobalt-based structures on a wide range of substrates.