Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 55
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martin, Santiago
  • Sorribes-Terrés, Iván
  • Mata, Jose A.
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 +/- 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes., Thanks to the Spanish Ministry of Science and Innovation for financial support through the projects PID2021-126071OB-C21, PID2021-126071OB-C22 and CEX2023-001286-S, funded by MICIN/AEI/10.13039/501100011033/FEDER "Una manera de hacer Europa". Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) is also gratefully acknowledged. I. S. thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR", and the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU". I.S. also gratefully acknowledges the program ESGENT from Generalitat valenciana (CIESGT/2024/16). J. M.-V. thanks the program "Santiago Grisolia" (GrisoliaP2021/114). The authors thank 'Servei Central d'Instrumentacio Cientifica (SCIC) de la Universitat Jaume I '. S. M. is grateful to Gobierno de Aragon for the grant E31_23R with European Social Funds (Construyendo Europa desde Aragon).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Alloying Engineering of Defective Molybdenum SulfideBasal Planes for Enhanced Borrowing Hydrogen Activity inthe Thioetherification of Alcohols

  • Rodenes-Carrillo, Miriam
  • Ostric, Darija
  • Martín, Santiago
  • Concepción, Patricia
  • Sorribes-Terrés, Iván
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The borrowing hydrogen thioetherification of alcohols overheterogeneous catalysts has emerged as an attractive andpractical synthetic strategy to prepare thioethers from theperspective of green and sustainable chemistry. Developingefficient catalysts is the key to improve this carbon-sulfur (C@S)bond formation process. Herein, a novel catalyst, namely{Mo2.89W0.11S4}n, has been prepared by alloying engineering of itsbasal planes through an innovative synthetic methodology thatmakes use of isostructural building entities based on molybde-num and tungsten sulfide molecular complexes with M3S4(M=Mo, W) cluster cores. Besides excellent activity and reus-ability, {Mo2.89W0.11S4}n is of broad scope, enabling the con-version of structurally diverse thiols and primary as well assecondary alcohols into thioethers. A set of characterizations, incombination with catalytic results, reveal that the catalyticactivity of {Mo2.89W0.11S4}n for this relevant transformation arisesfrom the presence of multiple-type active centers in thedefective basal planes of this alloyed catalyst. More specifically,coordinatively unsaturated sulfurs and metal atoms with Lewisbasic and Lewis acid properties, respectively, are proposed tobe the active sites involved in the borrowing hydrogenmechanism., This work has been supported by the Gen-T Plan of theGeneralitat Valenciana through the programs Subvencions al Excel·lència Científica de Júniors Investigadors (SEJI/2020/018)and Suport a l estabilització de les persones investigadores amb talent contractades amb càrrec a les convocatòries 2023 ianteriors del Pla GenT (ESGENT/016/2024). The Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR , the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033and by ERDF/EU , as well as the Universitat Jaume I(GACUJIMB/2023/13) are also gratefully acknowledged. Authorsare thankful for the support from the Severo Ochoa Center ofExcellence program (CEX2021-001230-S). M.R. acknowledgesthe Vice-Rectorate for Research, Innovation and Transfer of theUniversitat Politècnica de València (UPV) for a pre-doctoralfellowship. D.O. thanks the ERASMUS + programme. S.M. isgrateful for financial assistance from Gobierno de Aragónthrough grant E31_23R with European Social Funds (Con-struyendo Europa desde Aragón).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Deep eutectic solvents formed by glycerol and xylitol, fructose and sorbitol: effect of the different sugars in their physicochemical properties

  • Lomba, Laura
  • Werner, Álvaro
  • Giner, Beatriz
  • Lafuente, Carlos
The search for new eutectic solvents for different applications (extraction, drug formulation, chemical reactions, etc.) is booming thanks to their high solubility capacity and low toxicity. However, it is necessary to carry out a comprehensive physicochemical characterization of these mixtures to understand the molecular behavior at different experimental conditions. In this study, three deep eutectic solvents (DESs) formed by glycerol and xylitol, fructose and sorbitol and water in the molar ratio 1:2:3 were prepared and several physicochemical properties (refractive index, density, surface tension, viscosity, speed of sound, isobaric heat capacity and isentropic compressibility) were measured and analyzed in the 278.15–338.15 K temperature range. The results indicate a linear dependence with temperature for the following properties: surface tension, refractive index, density and isobaric molar heat capacity while viscosity values have been fitted to the Vogel–Fulcher–Tammann equation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Using eutectic solvents for extracting astaxanthin from dry biomass of Xanthophyllomyces dendrorhous pretreated by pulsed electric fields

  • Artigas-Hernández, Diego
  • Berzosa, Alejandro
  • Aguilar-Machado, Diederich
  • Raso, Javier
  • Artal, Manuela
The healthy properties of astaxanthin (AST) together with the growing interest in products of natural origin have motivated the development of sustainable extraction procedures from biomass. For this, it is essential to establish mechanisms that allow overcoming the barrier of the cell envelopes as well as the substitution of the conventional solvents. This work is focused on the evaluation of pulse electric fields (PEFs) as a fresh biomass pretreatment to enhance the efficacy of eutectic mixtures (ESs) as eco-friendly solvents for extracting AST from the freeze-dried yeast Xanthophyllomyces dendrorhous. The results showed a positive effect on the extraction efficiency of the pulse treatment and subsequent incubation stage. The thymol/salol system was the best solvent and the most favorable composition, temperature and extraction time were calculated. The efficiency reached 79% in the PEF-treated cells after incubation. The antioxidant capacity of AST in the eutectic mixture was determined and an IC50 value of 0.02 μg/mL was obtained. A synergistic effect between AST and thymol was observed. The main conclusion of the work is that consecutively using PEFs as an electroporation technique and ESs as solvents allows us to obtain a high extraction efficiency of AST from dry yeast.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermophysical characterization of 1-propylpyridinium 1,1,1-trifluoromethanesulfonate, effect of alkyl chain length of the cation, and anion structure

  • Díez, Héctor
  • Lafuente, Alberto
  • Mrad, Sahar
  • Lafuente, Carlos
Ionic liquids have attracted increasing attention as promising alternatives to traditional organic solvents due to their unique properties. Thermophysical properties such as density, speed of sound, refractive index, surface tension, isobaric molar heat capacity, kinematic viscosity, and electrical conductivity were measured for 1-propylpyridinium 1,1,1-trifluoromethanesulfonate over a wide temperature range and at atmospheric pressure. Volumetric properties were also determined at temperatures (283.15 - 338.15) K and at pressures up to 65.0 MPa. From these experimental data, some derived properties were calculated. Moreover, the influence of the chemical structure on these properties was investigated through comparing them with ionic liquids of common anion, ethylpyridinium 1,1,1-trifluoromethanesulfonate and 1-butylpyridinium 1,1,1-trifluoromethanesulfonate and an ionic liquid of common cation, 1-butylpyridinium tetrafluroborate.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dilute Gd hydroxycarbonate particles for localized spin qubit integration

  • Tejedor, Inés
  • Urtizberea, Ainhoa
  • Natividad, Eva
  • Martínez, Jesús I.
  • Gascón, Ignacio
  • Roubeau, Olivier
Molecular spins are considered as the quantum hardware to build hybrid quantum processors in which coupling to superconducting devices would provide the means to implement the necessary coherent manipulations. As an alternative to large magnetically-dilute crystals or concentrated nano-scale deposits of paramagnetic molecules that have been studied so far, the use of pre-formed sub-micronic spherical particles of a doped Gd@Y hydroxycarbonate is evaluated here. Particles with an adjustable number of spin carriers are prepared through the control of both particle size and doping. Bulk magnetic properties and continuous wave and time-domain-EPR spectroscopy show that the Gd spins in these particles are potential qubits with robust quantum coherence. Monolayers of densely-packed particles are then formed interfacially and transferred successfully to the surface of Nb superconducting resonators. Alternatively, these particles are disposed at controlled localizations as isolated groups of a few particles through Dip-Pen Nanolithography using colloidal organic dispersions as ink. Altogether, this study offers new material and methodologies relevant to the development of viable hybrid quantum processors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Large area arrays of discrete single-molecule junctions derived from host–guest complexes

  • Escorihuela, Enrique
  • Barrio, Jesús del
  • Davidson, Ross J.
  • Beeby, Andrew
  • Low, Paul J.
  • Prez-Murano, Francesc
  • Cea, Pilar
  • Martin, Santiago
The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host–guest complexes of the wire-like viologen derivative 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host–guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host–guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host–guest complexes without deleterious intermolecular coupling effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gas-Phase Synthesis of Iron Silicide Nanostructures Using a Single-Source Precursor: Comparing Direct-Write Processing and Thermal Conversion

  • Jungwirth, Felix
  • Salvador-Porroche, Alba
  • Porrati, Fabrizio
  • Jochmann, Nicolas P.
  • Knez, Daniel
  • Huth, Michael
  • Gracia, Isabel
  • Cané, Carles
  • Cea, Pilar
  • De Teresa, José María
  • Barth, Sven
The investigation of precursor classes for the fabrication of nanostructures is of specific interest for maskless fabrication and direct nanoprinting. In this study, the differences in material composition depending on the employed process are illustrated for focused-ion-beam- and focused-electron-beam-induced deposition (FIBID/FEBID) and compared to the thermal decomposition in chemical vapor deposition (CVD). This article reports on specific differences in the deposit composition and microstructure when the (H3Si)2Fe(CO)4 precursor is converted into an inorganic material. Maximum metal/metalloid contents of up to 90 at. % are obtained in FIBID deposits and higher than 90 at. % in CVD films, while FEBID with the same precursor provides material containing less than 45 at. % total metal/metalloid content. Moreover, the Fe:Si ratio is retained well in FEBID and CVD processes, but FIBID using Ga+ ions liberates more than 50% of the initial Si provided by the precursor. This suggests that precursors for FIBID processes targeting binary materials should include multiple bonding such as bridging positions for nonmetals. In addition, an in situ method for investigations of supporting thermal effects of precursor fragmentation during the direct-writing processes is presented, and the applicability of the precursor for nanoscale 3D FEBID writing is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring the Impact of the HOMO–LUMO Gap on Molecular Thermoelectric Properties: A Comparative Study of Conjugated Aromatic, Quinoidal, and Donor–Acceptor Core Systems

  • Blankevoort, Nickel
  • Bastante, Pablo
  • Davidson, Ross J.
  • Salthouse, Rebecca J.
  • Daaoub, Abdalghani H. S.
  • Cea, Pilar
  • Martin Solans, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Bryce, Martin R.
  • Agrait, Nicolas
  • Sadeghi, Hatef
Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO–LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor–acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Discarding metal incorporation in pyrazole macrocycles and the role of the substrate on single-layer assemblies

  • Lobo-Checa, Jorge
  • Rodríguez, Sindy Julieth
  • Hernández-López, Leyre
  • Herrer, Lucía
  • Passeggi, Mario C. G.
  • Cea, Pilar
  • Serrano, José Luis
Pyrazole derivatives are key in crystal engineering and liquid crystal fields and thrive in agriculture, pharmaceutical, or biomedicine industries. Such versatility relies in their supramolecular bond adaptability when forming hydrogen bonds or metal-pyrazole complexes. Interestingly, the precise structure of pyrazole-based macrocycles forming widespread porous structures is still unsolved. We bring insight into such fundamental question by studying the self-assembled structures of a bis-pyrazole derivative sublimed in ultra-high-vacuum conditions (without solvents) onto the three (111) noble metal surfaces. By means of high-resolution scanning tunneling microscopy that is validated by gas phase density functional theory calculations, we find a common hexagonal nanoporous network condensed by triple hydrogen bonds at the molecule–metal interface. Such assembly is disrupted and divergent after annealing: (i) on copper, the molecular integrity is compromised leading to structural chaos, (ii) on silver, an incommensurate new oblique structure requiring molecular deprotonation is found and, (iii) on gold, metal–organic complexes are promoted yielding irregular chain structures. Our findings confirm the critical role of these metals on the different pyrazole nanoporous structure formation, discarding their preference for metal incorporation into the connecting nodes whenever there is no solvent involved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermophysical properties of ethyl levulinate and n-alkanol systems

  • Abidi, Raouia
  • García-Gracia, Mario
  • Hernández, Ariel
  • Hichri, Monia
  • Lafuente, Carlos
Some thermophysical properties such as densities, speeds of sound, refractive indices, and heat flows of the binary systems ethyl levulinate and n-alkanols (methanol, ethanol, 1-propanol, and 1-butanol) are reported in the temperature range T = (283.15–313.15) K and at p = 100 kPa. From these experimental data, the excess properties were calculated and correlated with the composition using a modified Redlich–Kister equation. The excess molar volumes were negative for short-chain alcohols and positive for 1-propanol and 1-butanol. The excess refractive indices exhibited the opposite behaviour. The excess isentropic compressibilities were negative and the excess molar enthalpies, were positive. The perturbed chain statistical associating fluid theory equation of state (PC-SAFT EoS) was successfully applied to correlate the densities of the mixtures, and good qualitative results in the computation of the excess molar enthalpy were obtained. Furthermore, Schaaff’s collision factor theory (SCFT) and the Laplace mixing rule were coupled with PC-SAFT to predict the speed of sound and the refractive index, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in Langmuir–Blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José L.
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well‐organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well‐organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying‐flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo‐cross linking, leading to the formation of a compact photo‐crosslinked film. Incubation of these photo‐crosslinked films in a solution containing 1‐hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Robust large area molecular junctions based on transparent and flexible electrodes

  • García-Serrano, Aitor
  • Cea, Pilar
  • Osorio, Henrry M.
  • Pérez-Murano, Francesc
  • Rius, Gemma
  • Low, Paul J.
  • Martin, Santiago
Electrografting of an oligophenylene ethynylene monolayer (OPEH) onto a Mylar®-supported PEDOT : PSS and graphene substrate prior to wet-transfer of a graphene top-electrode has been used to create flexible and transparent large-area Mylar–PEDOT : PSS|OPEH|Graphene molecular junctions. The electrical conductance of the Mylar–PEDOT : PSS|OPEH|Graphene structure was determined by conductive probe atomic force microscopy (c-AFM), sampling various regions across the surfaces of multiple devices. All registered I–V curves (sampling size ∼150 tests) give a sigmoidal response, consistent with through molecule conductance and ruling out the presence of direct electrode contacts or short-circuits. The demonstration of the combined use of Mylar-supported PEDOT : PSS and graphene as alternative electrode materials to conventional metal thin film electrodes in large-area molecular junctions opens avenues to enable flexible and transparent molecular (opto)electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Characterization of camphor: thymol or dl-menthol eutectic mixtures; Structure, thermophysical properties, and lidocaine solubility

  • Padilla, Nuria
  • Delso, Ignacio
  • Bergua, Fernando
  • Lafuente, Carlos
  • Artal, Manuela
The low solubility of drugs in aqueous media is a major problem for the pharmaceutical industry. Among the solutions proposed, the use of eutectic mixtures can be highlighted. In them, the components used can also increase the therapeutic advantages of the active principle. In this work, we analyzed the solubility of lidocaine in mixtures of camphor + thymol or dl-menthol. These binary eutectic solvents were also characterized. For all this, several NMR techniques were used and different thermophysical properties (density, speed of sound, refraction index, isobaric molar heat capacity, surface tension, and kinematic viscosity) were measured. The results indicated that the interaction of camphor with thymol was stronger than with dl-menthol, providing a more compact fluid. On the contrary, the steric hindrance was greater in the mixture with dl-menthol, giving rise to a more viscous liquid. Furthermore, the lidocaine was significantly more soluble (up to 540 times) in these mixtures than in water. The lidocaine showed the strongest interactions with thymol molecules, somewhat weaker with dl-menthol, and the weakest were with camphor ones.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineered p¿p interactions favour supramolecular dimers X@[FeL<sub>3</sub>]<sub>2</sub> (X = Cl, Br, I): solid state and solution structure

  • Risa, Arnau
  • Barrios, Leoní A.
  • Diego, Rosa
  • Roubeau, Olivier
  • Aleshin, Dmitry Y.
  • Nelyubina, Yulia
  • Novikov, Valentin
  • Teat, Simon J.
  • Ribas-Ariño, Jordi
  • Aromí, Guillem
Ditopic bis-pyrazolylpyridine ligands usually react with divalent metal ions (M2+) to produce dinuclear triple-stranded helicates [M2L3]4+ or, via π⋯π interactions, dimers of monoatomic complexes ([ML3]2)4+. The introduction of an additional benzene ring at each end of ligand L increases the number of aromatic contacts within the supramolecular aggregate by 40%, driving the self-recognition process in an irreversible manner. Consequently, the mixing of new bis-pyrazolylquinoline L2 with FeX2 salts leads to crystallization of the tripartite high-spin assemblies (X@[Fe(L2)3]2)3+ (X = Cl, Br or I). The aggregates exhibit exceptional stability, as confirmed by a combination of paramagnetic 1H NMR techniques, demonstrating their persistence in solution. Our investigations further reveal that the guests Br− and I− are retained inside the associate in solution but Cl− is immediately released, resulting in the formation of the empty supramolecular dimer ([Fe(L2)3]2)4+.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermophysical properties of lidocaine:thymol or l-menthol eutectic mixtures

  • Molero Sangüesa, María
  • Jiménez Omeñaca, Isabel
  • Bergua, Fernando
  • Artigas, Héctor
  • Lafuente, Carlos
  • Artal, Manuela
Backgrounds A key objective of green chemistry is to obtain a broad database of thermophysical properties of liquid mixtures. Thus, the replacement of conventional solvents with ecological ones will be facilitated. Methods Herein, two eutectic systems with therapeutic properties are characterized. They are binary mixtures of lidocaine and thymol or l-menthol. Properties as solid-liquid equilibrium, density, speed of sound, refractive index, isobaric molar heat capacity, surface tension, and viscosity were determined at 0.1 MPa and several temperatures. From them, others derivatives were calculated. In addition, the phase diagram was correlated with NRTL model and the density and isobaric molar heat capacity were modelled with PC-SAFT equation of state. Significant findings Although the mixtures with l-menthol were almost ideal, a complex diagram owing the presence of stable and metastable phases. For these mixtures, the values of all measured properties were lower than those with thymol. Results indicated that PC-SAFT can be used to predict the thermodynamic behaviour of both systems in any working condition.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gd Metal–Organic Framework Thin Film for On-Chip Local Magnetic Refrigeration

  • Tejedor, Inés
  • Kravchenko, Dmitry E.
  • Gandara-Loe, Jesús
  • Ameloot, Rob
  • Gascón, Ignacio
  • Roubeau, Olivier
Dense metal–organic frameworks with high spin paramagnetic nodes are competitive materials for cryogenic magnetic refrigeration, particularly in applications for which local cooling is advantageous. We focus on obtaining thin films of gadolinium formate, which has a large volumetric magnetocaloric effect. Continuous and homogeneous deposits of gadolinium formate are successfully formed on silicon by means of aerosol jet printing, with control over the film thickness from 0.35 μm up to 2.5 μm. The excellent cooling power of the deposits is evidenced via direct measurements of the cooling of a 200 μm silicon wafer down to sub-K temperatures by a single demagnetization from 1 T and 2 K, thereby demonstrating the potential of this approach for on-chip local magnetic refrigeration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Spin-coated films of gadolinium formate for cryogenic cooling

  • Tejedor, Inés
  • Calvo, María Isabel
  • Gandara-Loe, Jesús
  • Rubio-Giménez, Víctor
  • Ameloot, Rob
  • Gascón, Ignacio
  • Roubeau, Olivier
Continuous and homogenous films of spin-coated gadolinium formate provide a solution for efficient local cryogenic magnetic refrigeration. The films possess unprecedentedly high surface cooling power, enough to cool a 325 μm silicon wafer down to sub-K temperatures by a single demagnetization step from 2 K or even liquid He temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The conductance and thermopower behavior of pendent trans-coordinated Palladium(II) complexes in cingle-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Al Malki, Wafa
  • Salthouse, Rebecca J.
  • Cea, Pilar
  • Martin, Santiago
  • Batsanov, Andrei S.
  • Lambert, Colin J.
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 1,2-bis(2-pyridylethynyl)benzene (bpb) palladium complexes on their electron transmission properties within gold|single-molecule|gold junctions. The ligands 2,2′-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(4-(methylthio)pyridine) (Lm) and 6,6′-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(3-(methylthio)pyridine) (Lp) were synthesized and coordinated with PdCl2 to give the trans-Pd(Lm or p)Cl2 complexes. X-ray photoelectron spectroscopy (XPS) measurements shed light on the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy–break junction (STM–BJ) measurements and density functional theory (DFT) calculations demonstrate that the typical lower conductance of meta- compared with para-connected isomers in a molecular junction was suppressed upon metal coordination. Simultaneously there was a modest increase in both conductance and Seebeck coefficient due to the contraction of the HOMO–LUMO gap upon metal coordination. It is shown that the low Seebeck coefficient is primarily a consequence of how the resonances shift relative to the Fermi energy
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Advancements in engineering planar model cell membranes: current techniques, applications, and future perspectives

  • Coronado, Sara
  • Herrera, Johan
  • Pino, María Graciela
  • Martín, Santiago
  • Ballesteros-Rueda, Luz
  • Cea, Pilar
Cell membranes are crucial elements in living organisms, serving as protective barriers and providing structural support for cells. They regulate numerous exchange and communication processes between cells and their environment, including interactions with other cells, tissues, ions, xenobiotics, and drugs. However, the complexity and heterogeneity of cell membranes—comprising two asymmetric layers with varying compositions across different cell types and states (e.g., healthy vs. diseased)—along with the challenges of manipulating real cell membranes represent significant obstacles for in vivo studies. To address these challenges, researchers have developed various methodologies to create model cell membranes or membrane fragments, including mono- or bilayers organized in planar systems. These models facilitate fundamental studies on membrane component interactions as well as the interactions of membrane components with external agents, such as drugs, nanoparticles (NPs), or biomarkers. The applications of model cell membranes have extended beyond basic research, encompassing areas such as biosensing and nanoparticle camouflage to evade immune detection. In this review, we highlight advancements in the engineering of planar model cell membranes, focusing on the nanoarchitectonic tools used for their fabrication. We also discuss approaches for incorporating challenging materials, such as proteins and enzymes, into these models. Finally, we present our view on future perspectives in the field of planar model cell membranes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interfacial insights: [6]-Gingerol monolayers at the air-water interface and beyond

  • Adwan, Lara
  • Dotor, Laura
  • Pino, María Graciela
  • Gil, Adriana
  • Martin, Santiago
  • Cea, Pilar
Ginger is a culinary spice with a millennia-old tradition due to its extensive therapeutic applications, recently validated by scientific studies. In particular [6]-Gingerol, a key active molecule in ginger, exhibits extraordinary capabilities in addressing a wide spectrum of health issues. However, its therapeutic potential is limited by its rather low bioavailability. The incorporation of [6]-Gingerol into membrane systems of liposomes, micelles, or exosomes is a promising strategy to overcome this limitation. In this contribution, we report the hitherto unexplored surface properties of [6]-Gingerol at the air-water interface. Our comprehensive study, which includes a detailed analysis of surface pressure and surface potential vs. area per molecule isotherms, surface compression modulus, and Brewster Angle Microscopy, demonstrates the capability of [6]-Gingerol to form Langmuir films. These films can be transferred onto solid substrates, forming remarkably homogeneous Langmuir-Blodgett films which have been characterized by Quartz Crystal Microbalance and Atomic Force Microscopy. This study may be of interest as it paves the way for future research on introducing [6]-Gingerol into membrane systems and transporting it into living cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Asymmetric [Dy2] molecules deposited into microSQUID susceptometers: in situ characterization of their magnetic integrity

  • Repollés, Ana
  • Pallarés, María Carmen
  • Aguilà, David
  • Roubeau, Olivier
  • Velasco, Verónica
  • Gella, Diego
  • Barrios, Leoní A.
  • Martínez-Pérez, María José
  • Sesé, Javier
  • Drung, Dietmar
  • Martínez, Jesús Ignacio
  • Schurig, Thomas
  • Le Guennic, Boris
  • Lostao, Anabel
  • Aromí, Guillem
  • Luis, Fernando
The controlled integration of magnetic molecules into superconducting circuits is key to developing hybrid quantum devices. Herein, we study [Dy2] molecular dimers deposited into micro-SQUID susceptometers. The results of magnetic, heat capacity and magnetic resonance experiments, backed by theoretical calculations, show that each [Dy2] dimer fulfills the main requisites to encode a two-spin quantum processor. Arrays of between 2 * 108 and 7 * 109[Dy2] molecules were optimally integrated under ambient conditions inside the 20 mum wide loops of micro-SQUID sensors by means of dip-pen nanolithography. Equilibrium magnetic susceptibility and phonon-assisted spin tunneling dynamics measured in situ substantiate that these molecules preserve spin ground states, magnetic interactions and magnetic asymmetry that characterize them in bulk. These results show that it is possible to interface multi-qubit molecular complexes with on-chip superconducting circuits without disturbing their relevant properties and suggest the potential of soft nanolithography techniques to achieve this goal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He<sup>+</sup> and Ne<sup>+</sup> beam nanowriting from organometallic thin films: a comparison with Ga<sup>+</sup> and e<sup>-</sup> beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • De Teresa, José María
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Localized nanoscale formation of vanadyl porphyrin 2D MOF nanosheets and their optimal coupling to lumped element superconducting resonators

  • Gimeno, Ignacio
  • Luis, Fernando
  • Marcuello, Carlos
  • Pallarés, Maria Carmen
  • Lostao, Anabel
  • Calero de Ory, Marina
  • Gomez, Alicia
  • Granados, Daniel
  • Tejedor, Inés
  • Natividad, Eva
  • Urtizberea, Ainhoa
  • Roubeau, Olivier
A strategy toward the realization of a quantum spin processor involves the coupling of spin qubits and qudits to photons within superconducting resonators. To enable the realization of such hybrid architecture, here we first explore the design of a chip with multiple lumped-element LC superconducting resonators optimized for their coupling to distinct transitions of a vanadyl porphyrin electronuclear qudit. The controlled integration of the vanadyl qudit onto the superconducting device, both in terms of number and orientation, is then attained using the in situ formation of nanosheets of a 2D framework built on the vanadyl qudit as a node. Low-temperature transmission experiments demonstrate the coupling of photons in resonators with different frequencies to the targeted electronuclear transitions of the vanadyl qudit, also confirming the control over the vanadyl qudit node orientation. The derived collective spin-photon couplings in the 0.3–1.6 MHz range then allow to estimate enhanced, optimal, single spin photon couplings up to 4 Hz.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Geraniol and hydrophobic geraniol: thymol eutectic mixtures: Structure and thermophysical characterization

  • Haftbaradaran Esfahani, Mohammadreza
  • Bergua, Fernando
  • Delso, Ignacio
  • Lafuente, Carlos
  • Artal, Manuela
The properties of essential oils as food preservatives are well-established. These components have also been used as neoteric solvents to prepare eutectic mixtures. Their high capacity to dissolve poorly water-soluble substances makes them particularly interesting in the biotechnology industry. To implement them, it is essential to determine the structural and chemical-physical properties, as well as develop models to predict the behaviour under any operational condition. Herein, pure geraniol and geraniol/thymol mixtures are studied. Nuclear magnetic resonance experiments and molecular dynamics are used to evaluate the fluid structure. In addition, seven thermophysical properties are measured and correlated. The experimental densities, surface tensions, and viscosities were lower than 952 kg m–3, 33 mN m–1, and 36 mPa s, respectively. These values were adequate for the industrial application of these mixtures. PC-SAFT equation of state well predicted the density with an average deviation of 0.13 %, and the isobaric molar heat capacity with a deviation of 6.9 %. Greater compaction was observed at higher thymol molar ratios and dispersive interactions were predominant. Depending on the composition, geraniol was both an acceptor and donor of hydrogen bonds; conversely, thymol acted as a donor. The article provides the necessary knowledge to be able to use these mixtures and design new ones, as ecological solvents in different applications including those in the agri-food sector.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • De Teresa, José María
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermophysical characterization of lidocaine:camphor:thymol or l-menthol eutectic mixtures: Experimental and modelling

  • Sancho-Blasco, Mónica
  • Pastor, Jorge L.
  • Muñoz-Embid, José
  • Lafuente, Carlos
  • Artal, Manuela
Knowing the values of the thermodynamic and transport properties of fluids is essential for their implementation in different fields. In addition, their analysis allows us to understand the intermolecular interactions which is useful in the subsequent design of processes. In this work, two ternary eutectic mixtures composed of lidocaine, camphor, and thymol or l-menthol were studied. Six thermophysical properties were measured at 0.1 MPa and at various temperatures. Density values up to 65 MPa were also determined. From these data, different properties were calculated, such as isobaric expansibility, isentropic and isothermal compressibility, internal pressure, and critical temperature, among others. The mixture with thymol was the most dense, structured, and viscous. The correlations and models used showed small deviations between the experimental and estimated values. The deviations of the density and isobaric molar heat capacity predicted with PC-SAFT equation of state were lower than 1.4 % and 3.1 %, respectively. The interactions between lidocaine and thymol were the strongest. On the other hand, camphor was shown to be a steric hindrance to binary interactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Alloying Engineering of Defective Molybdenum Sulfide Basal Planes for Enhanced Borrowing Hydrogen Activity in the Thioetherification of Alcohols

  • Rodenes, Miriam
  • Oštric, Darija
  • Martín, Santiago
  • Concepción, Patricia
  • Corma, Avelino
  • Sorribes, Iván
The borrowing hydrogen thioetherification of alcohols over heterogeneous catalysts has emerged as an attractive and practical synthetic strategy to prepare thioethers from the perspective of green and sustainable chemistry. Developing efficient catalysts is the key to improve this carbon‐sulfur (C−S) bond formation process. Herein, a novel catalyst, namely {Mo2.89W0.11S4}n, has been prepared by alloying engineering of its basal planes through an innovative synthetic methodology that makes use of isostructural building entities based on molybdenum and tungsten sulfide molecular complexes with M3S4 (M=Mo, W) cluster cores. Besides excellent activity and reusability, {Mo2.89W0.11S4}n is of broad scope, enabling the conversion of structurally diverse thiols and primary as well as secondary alcohols into thioethers. A set of characterizations, in combination with catalytic results, reveal that the catalytic activity of {Mo2.89W0.11S4}n for this relevant transformation arises from the presence of multiple‐type active centers in the defective basal planes of this alloyed catalyst. More specifically, coordinatively unsaturated sulfurs and metal atoms with Lewis basic and Lewis acid properties, respectively, are proposed to be the active sites involved in the borrowing hydrogen mechanism.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene as a Suitable Support for Nickel Nanoparticles Functionalized with NHC Ligands in Dehydrogenation of Alcohols

  • Medina-Vargas, Judith
  • Mollar-Cuni, Andrés
  • Martín, Santiago
  • Sorribes, Iván
  • Mata, Jose A.
In this paper, we describe a bottom‐up synthesis of nickel nanoparticles (NiNPs) functionalized with N‐heterocyclic carbene ligands and immobilized onto reduce graphene oxide (rGO). This tailored synthetic approach provides insights into the physical and chemical factors influencing NiNP formation and properties. The hybrid material (metal nanoparticles + organic ligand + graphene) is prepared starting from a well‐defined nickel complex that is decomposed in a controlled manner providing ligand‐decorated metal nanoparticles under mild conditions. The resulting NiNPs are spherical, with a small average size distribution (3.7 ± 0.9 nm). This hybrid material (NiNPs/NHC@rGO) is an efficient catalytic material for the dehydrogenation of alcohols to produce carbonyls with the concomitant release of molecular hydrogen. We explore its catalytic properties, substrate scope, and recyclability. Furthermore, X‐ray photoelectron spectroscopy analysis reveals the material's evolution over multiple catalytic cycles. The reusability of NiNPs on graphene represents a significant advancement in the design of nickel‐based catalytic materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Operando Raman and ex situ characterization of an iron-based conductive MOF as a negative electrode in Li-ion batteries

  • Ciria-Ramos, Isabel
  • Neale, Alex R.
  • Hardwick, Laurence J.
  • Juarez-Perez, Emilio J.
  • Gascón, Ignacio
  • Haro, Marta
An iron-based electrically conductive metal–organic framework (MOF), Fe-HHTP, formed by the coordination of Fe cations and the organic ligand HHTP (2,3,6,7,10,11-hexahydroxytriphenylene), has been synthesized, characterized, and explored as a potential negative electrode for lithium-ion batteries (LIBs). Galvanostatic cycling experiments, with a lower cut-off voltage of 0.1 V vs. Li/Li+, reveal that Fe-HHTP undergoes a significant activation process, resulting in an increase in specific capacity up to 1142 mAh g−1 after ∼220 cycles at a current of 355 mA g−1. Operando Raman spectroscopy during the first lithiation, complemented by ex situ techniques at different cycling stages, demonstrates that both the organic ligands and metal centers actively contribute to Li+ storage. Initially, lithiation occurs primarily at the MOF boundaries, while continuous cycling induces a structural transformation that allows greater accessibility to the inner regions of Fe-HHTP. These results provide a better understanding of the electrochemical and structural behavior of pristine MOFs that allow tailoring their properties for direct application in energy storage devices without the need for high-temperature processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Recycling Properties of Iridium Nanoparticles Anchored on Graphene as Catalysts in Alcohol Oxidation

  • Ruiz-Almoguera, David
  • Martín, Santiago
  • Sorribes, Iván
  • Mata, José A.
In this paper, we describe the synthesis, characterization, and recycling properties of iridium nanoparticles (IrNPs) anchored on graphene (IrNPs@GNPs) as a catalyst for alcohol oxidation. The formation of this hybrid material (comprising metal nanoparticles on graphene) is achieved in a single step under mild conditions. Graphene serves not only as a support for metal nanoparticles but also plays a critical role in controlling nanoparticle growth and nucleation while enhancing stability by preventing sintering. The IrNPs exhibit a spherical morphology with a small average size distribution (2.1 nm). The IrNPs@GNPs is an efficient catalytic material in the conversion of alcohols to the corresponding carbonyls in a sustainable manner, as supported by quantitative sustainability metrics. Oxidation reactions proceed at room temperature, using water as the solvent and atmospheric oxygen as the terminal oxidant. We detail the catalytic activity, substrate scope, and reuse/recycling of this hybrid material. Furthermore, we identify the primary deactivation pathway of the catalyst and present a regeneration protocol that restores its initial activity. The reuse and recyclability of iridium nanoparticles on graphene represent a significant advancement in the sustainable application of iridium-based catalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring Ibuprofen–Menthol Eutectic Systems: Physicochemical Properties and Cytotoxicity for Pharmaceutical Applications

  • Werner, Álvaro
  • Zuriaga, Estefanía
  • Sanz, Marina
  • Bergua, Fernando
  • Giner, Beatriz
  • Lafuente, Carlos
  • Lomba, Laura
Recent pharmaceutical research has increasingly focused on eutectic systems to improve the formulation and delivery of active pharmaceutical ingredients (APIs). This study presents the preparation and characterization of three therapeutic eutectic systems (THEESs) based on ibuprofen and menthol at various molar ratios. Methods: The THEESs were prepared and analyzed by assessing their physicochemical properties and rheological properties were evaluated to determine flow behavior. Cytotoxicity assays were conducted on HaCaT and HepG2 cell lines to assess biocompatibility. Results: All systems formed monophasic, homogeneous, clear and viscous liquids. Key physicochemical properties, including density, refractive index, surface tension, speed of sound and isobaric heat capacity, showed a temperature-dependent, inverse proportional trend. Viscosity followed the Vogel–Fulcher–Tammann equation, and rheological analysis revealed non-Newtonian behavior, which is important for pharmaceutical processing. Notably, cytotoxicity assays revealed that Ibu-M3 and Ibu-M4 showed lower toxicity than pure compounds in HaCaT cells, while Ibu-M5 was more toxic; in HepG2 cells, only Ibu-M3 was less toxic, whereas Ibu-M4 and Ibu-M5 were more cytotoxic than the pure compounds. Conclusions: These findings highlight the potential of ibuprofen–menthol eutectic systems for safer and more effective pharmaceutical formulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Encapsulation Enhances the Quantum Coherence of a Solid‐State Molecular Spin Qubit

  • Swain, Abinash
  • Barrios, Leoní A.
  • Nelyubina, Yulia
  • Teat, Simon J.
  • Roubeau, Olivier
  • Novikov, Valentin
  • Aromí, Guillem
Spins within molecules benefit from the atomistic control of synthetic chemistry for the realization of qubits. One advantage is that the quantum superpositions of the spin states encoding the qubit can be coherently manipulated using electromagnetic radiation. The main challenge is the fragility of these superpositions when qubits are to partake of solid‐state devices. We address this issue with a supramolecular approach for protecting molecular spin qubits against decoherence. The molecular qubit [Cr(ox)3]3− has been encapsulated inside the diamagnetic triple‐stranded helicate [Zn2L3]4+ (L is a bis‐pyrazolylpyridine ligand). The quantum coherence of the protected qubit is then analyzed with pulsed EPR spectroscopy and compared with the unprotected qubit, both in solution and in the solid state. Crucially, the spin–spin relaxation in the solid state has been examined within diamagnetic crystal lattices of the isostructural ([Al(ox)3]@[Zn2L3])+ or [Al(ox)3]3‐ assemblies, respectively, doped with the Cr3+ qubit in two different (<10%) concentrations. The study unveils a surprising increase of the phase memory time of the qubit upon encapsulation only in the solid. Spin‐lattice relaxation times also exhibit a significant enhancement, as established from inversion recovery pulse sequences and from slow relaxation of the magnetization of the protected qubit, not featured by the free qubit.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Molecular Electronics Meets Direct-Write Carbon Nanofabrication via Focused Electron-Beam-Induced Deposition (FEBID): A Platform for Junction Architecture Design

  • García-Serrano, Aitor
  • Sangtarash, Sara
  • González-Orive, Alejandro
  • Sadeghi, Hatef
  • Martín, Santiago
  • Herrer, Lucía
  • Nichols, Richard J.
  • Low, Paul J.
  • Lambert, Colin J.
  • de Teresa, José María
  • Sangiao, Soraya
  • Cea, Pilar
The electrical characteristics of a molecular junction are highly sensitive to the nature and uniformity of the molecule|electrode contacts. This gives rise to significant interest in the development of not only the active molecular structures that modulate charge transport and the anchor groups that contact them to the electrodes, but also methods for assembling uniform molecular monolayers on a substrate electrode and subsequent fabrication of a “top electrode” to achieve the reliable fabrication of viable molecular electronic devices. In this contribution, 4-(4-(4-(trimethylsilylethynyl)phenylethynyl)phenylethynyl)aniline was converted to the corresponding diazonium salt and electrografted onto highly oriented pyrolytic graphite (HOPG), resulting in an organized monolayer covalently bonded to the HOPG “substrate” electrode. Subsequently, focused electron-beam-induced deposition was used to form an amorphous carbon top electrode (C-FEBID) onto the monolayer from a naphthalene precursor. By guiding the raster scanning of the electron beam, the position, shape, and thickness of the carbon electrode “written” onto the monolayer can be controlled with nanometer precision. In addition, as a proof-of-principle demonstration of the construction of the interconnects necessary for integration of molecular devices, platinum was deposited precisely on top of the C-FEBID electrodes, using focused-ion-beam-induced deposition of PtMe3CpMe (CpMe = η5-C5H4Me) (Pt-FIBID). The HOPG|molecule|C-FEBID|Pt-FIBID “large area” junctions produced in this manner exhibited excellent reproducibility and were free of short circuits for top-electrode dimensions ranging from 4 × 4 to 8 × 8 μm2. The electrical characteristics of these devices were measured and modeled by using quantum chemical approaches. These results illustrate alternative routes toward the fabrication of planar 2D devices based on molecular monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single-Molecule and π–π-Stacked Dimer Electron Transport in Carbazole and Folded Bicarbazole Derivatives in Molecular Junctions

  • Alrehaili, Adel Amer
  • Davidson, Ross J.
  • Hurtado-Gallego, Juan
  • Alajmi, Asma
  • Alwhaibi, Noorah
  • Batsanov, Andrei S.
  • Martin, Santiago
  • Cea, Pilar
  • Bryce, Martin R.
  • Agraït, Nicolás
  • Ismael, Ali K.
  • Lambert, Colin J.
The present work provides insight into how the conformations of flexible molecules can impact their single-molecule conductance. Six thiol-substituted carbazole-based molecules are synthesized and characterized. In four, two carbazole groups are joined by a linking group (1,3-propane or meta-xylene) while the remaining two are model monocarbazoles. Using a combination of X-ray hotoelectron spectroscopy (XPS), single-molecule conductance measurements, and density functional theory (DFT) calculations, we demonstrate that upon transitioning from a self-assembled monolayer (SAM) to a single-molecule junction, the intermolecular interactions give way to intramolecular interactions. This resulted in the flexible bicarbazole molecular wire switching conductance mechanisms, which occurred primarily via the covalent conjugated aromatic part of the molecule in the SAM to one including conductance via noncovalent π−π interactions in the single-molecule junction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Self‐Cooling Molecular Spin Qudits

  • Palacios, Elías
  • Aguilà, David
  • Gracia, David
  • Maniaki, Diamatoula
  • Barrios, Leoní A.
  • Chiesa, Alessandro
  • Martínez, Jesús I.
  • Novikov, Valentin
  • Roubeau, Olivier
  • Carretta, Stefano
  • Evangelisti, Marco
  • Aromí, Guillem
  • Luis, Fernando
The need of operating molecular spin qubits at very low temperatures constitutes a technological limitation. This challenge is addressed by integrating, in the same material and at the molecular scale, quantum processing and magnetic refrigeration capabilities. The molecular unit is a [GdEr] heterolanthanide coordination complex, where Er(III) encodes a qubit while Gd(III) provides a large magnetocaloric effect. The properties of each component are separately studied in isostructural [LaEr] and [GdLu] complexes, where each functional ion lies next to a diamagnetic metal. All complexes are characterized by magnetic, heat capacity, and EPR measurements. The results show that the presence of both ions in the same molecule has a synergic effect on both functionalities. Thus, the coupling between Er(III) and Gd(III) spins lifts any level degeneracies even close to zero magnetic field, leading to a d = 16 set of spin states that, as revealed by pulse EPR measurements, can be coherently manipulated. In turn, Er(III) enhances the magnetocaloric effect compared to [GdLu], extending it to lower temperatures. This is corroborated by direct magnetocaloric measurements, which show the ability of this material to cool itself, and a device, down to temperatures as low as 0.4 K.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Uncrosslinked Thermoresponsive Hybrid Magnetic Nanospheres Directly Prepared from Poly( <i>N</i> -isopropylacrylamide) that Behave as Heating Rate Nanosensors

  • García-Maestre, María
  • Cervera-Gabalda, Laura
  • Natividad, Eva
Poly(N-isopropylacrylamide) (PNIPAM) provides thermoresponsiveness to nanoobjects containing magnetic/plasmonic nanoparticles (NPs) for biosensing and biomedicine. Conjugation methods include the grafting of PNIPAM onto NPs or the embedding of NPs in PNIPAM nanogels. Nanoobjects are often obtained simultaneously with monomer (NIPAM) polymerization, and the cytotoxicity of unreacted NIPAM represents a non-negligible concern. Herein, a facile and versatile miniemulsion method employing already polymerized PNIPAM is developed. Miniemulsion is achieved through PNIPAM globulization above the lower critical solution temperature (LCST) and stabilized by poly(vinyl alcohol) (PVA). Aqueous decants, obtained after solvent evaporation, contain thermoresponsive nanospheres with PNIPAM/PVA blends, stable in water for months, monomodal in size at high magnetic NP contents, biocompatible and with hyperthermia capability. Unlike the shrinking/swelling displayed by PNIPAM-based nanogels, these uncrosslinked nanospheres disintegrate/rebuild, with a size after disintegration undoubtedly related to their heating rate across LCST, behaving as unprecedented dual hyperthermia agents and heating rate nanosensors without further sensing molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermophysical properties of eutectic mixtures composed by oleic acid and components of essential oils

  • Pérez-Pueyo, Elena
  • Artigas, Héctor
  • Haftbaradaran Esfahani , Mohammadreza
  • Lafuente, Carlos
  • Artal, Manuela
Currently, replacing traditional solvents with others whose components are considered safe is one of the most important challenges in the chemical industry. However, this change cannot be achieved without understanding the behavior of fluids under different operating conditions. To achieve this, thermophysical properties must be either determined experimentally over wide ranges of pressure, temperature, and composition, or tools must be available to predict them. Here, we studied binary mixtures of Generally Recognize as Safe (GRAS) compounds. These mixtures could be used both as extractants of natural products and solvents of poorly-water soluble ones. Specifically, they are oleic acid-based systems with thymol, l-menthol, eugenol, or linalool. The measured properties were the phase change equilibria, density, speed of sound, refractive index, isobaric molar heat capacity, surface tension, and kinematic viscosity at 0.1 MPa and from 283.15 to 338.15 K. In addition, several derived properties were calculated, different correlations were used and the PC-SAFT equation of state (EoS) was validated. All mixtures were less dense than water and moderately viscous. The most and least compact mixtures were those with eugenol and linalool, respectively. The prediction of the isobaric molar heat capacity from both molar mass and critical properties, as well as EoS, showed a deviation of less than 5 % from the measured values. For the density, the maximum mean relative deviation with the EoS results was of 0.19 %.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On-chip EPR spectrometry of metalloproteins using superconducting lumped element resonators

  • Marcuello, Carlos
  • Rodriguez, David
  • Pallarés, María Carmen
  • Granados, Daniel
  • Roubeau, Olivier
  • Luis, Fernando
  • Gomez, Alicia
  • Lostao, Anabel
We report electron paramagnetic resonance experiments performed on myoglobin hemeproteins using a chip hosting 6 superconducting lumped element resonators with resonance frequencies between 1.94 and 2.11 GHz. Successive layers of myoglobin were deposited onto the inductors of four of them using dip-pen nanolithography, a technique based on atomic force microscopy. A combination of atomic force and confocal microscopies estimated the number of protein molecules in each deposit, which ranges from 8.6 × 10^11 (one dip-pen layer) to 3.33 × 10^12 (four dip-pen layers). Two reference bulk samples were pipetted from the same solution onto the remaining two resonators. The microwave transmission of the device, measured at 11 mK, shows evidence of the coupling of protein spins to the photon excitations of all resonators. In particular, the resonance broadening measured as a function of magnetic field provides the spin resonance absorption spectrum. The analysis suggests that proteins tend to self-orient on the chip. It also allows estimating the single spin to single photon coupling strength, which is around 9 Hz. This high coupling value suggests that dip-pen nanolithography gives rise to a close to optimum interface between the molecules and the chip surface. The developed methodology combines an increase in sensitivity of at least three orders of magnitude with the ability to characterize multiple samples in a single experiment, opening the door to a highly sensitive multi-analyte detection technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mechanistic Insights in Acceptorless Dehydrogenation of N-Heterocycles Using Graphenes as Carbocatalysts

  • Mollar-Cuni, Andrés
  • García-Aznar, Pablo
  • Martín, Santiago
  • Sastre, German
  • García, Hermenegildo
  • Mata, Jose A.
Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of N-heterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Geraniol:l-menthol eutectic mixtures; thermophysical properties and drug solubility

  • Esfahani, Mohammadreza Haftbaradaran
  • Bergua, Fernando
  • Delso, Ignacio
  • Lafuente, Carlos
  • Artal, Manuela
The study of eco-sustainable alternative solvents as the eutectic mixtures (ESs) is a fundamental pillar of the concept of green chemistry. Furthermore, the dissolution of pharmaceutical active ingredients (APIs) in ESs has shown to be a feasible strategy to improve the bioavailability of poorly soluble APIs in water. Here, three geraniol:l-menthol (GM) mixtures are characterized for the first time. The structure and thermophysical properties were evaluated and discussed. Furthermore, the ability of GM ES and pure geraniol (G) to dissolve five APIs was determined and compared with that of water and other ESs. No similar studies were found in the literature for this system. From NMR, a more slowly diffusion of the species as the l-menthol ratio increased was observed. All hydrodynamic radii were similar, about 6.8 Å. Also, no strong aggregation was observed. At 298.15 K, the values of density, free volume, and surface tension were about 890 kg/m3, 72 %, and 28.5 mN/m, respectively. The dynamic viscosity ranged from 10 to 19 mPa s. These properties decreased as the G mole ratio increased. Furthermore, a parallel orientation of the adjacent dipoles was observed. Thermodynamic correlations and PC-SAFT equation of state were validated. The lowest solubility was obtained with water as solvent and the highest with pure G. Respectively, the values expressed as mole fraction of API were: 6.12⋅10− 6 and 2.31⋅10− 4 for nitrofurantoin, 4.17⋅10− 6 and 1.69⋅10− 3 for furosemide, 2.56⋅10− 8 and 0.028 for quercetin, 3.08⋅10− 5 and 0.026 for tetracycline, and 7.66⋅10− 7 and 0.042 for carvedilol.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancement of molecular conductance through a supramolecular five-molecule assembly

  • Escorihuela, Enrique
  • Regalado Aguilar, Mauricio
  • Mondal, Biswajit
  • Cuscó, Sara
  • Romero, Pilar
  • Davidson, Ross J.
  • Cea, Pilar
  • Benet-Buchholz, Jordi
  • Ruiz, Eliseo
  • Aragonès, Albert C.
  • Martín, Santiago
Achieving a comprehensive understanding and precise control of non-covalent interactions is crucial in molecular design and the development of functional molecular electronic devices, where supramolecular interactions enable the control of the local environment in molecular assemblies. Here, intermolecular interactions are used to create a complex supramolecular assembly by π stacking of 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride (1[Cl]2) and tetracyanoquinodimethane radical anion (TCNQ·−), whose crystal structure is determined by an electron diffraction technique, showing the presence of stacked 12+-2(TCNQ·−) units. This solid dissolves in aqueous solutions of cucurbit[8]uril (CB[8]), which acts as the host, to form a supramolecular five-molecule {12+-2(TCNQ·−)@2CB[8]} assembly. Its transport properties result in a significant enhancement of conductance. Theoretical studies confirm the stability of the supramolecular assembly and corroborate the enhancement in conductance. These results present a simple and effective method for stabilizing and enhancing charge transport efficiency through a combination of non-covalent and supramolecular interactions, with significant implications for the development of future (opto)electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Experimental and theoretical studies of isomeric metal (N^C^N)Cl coordination complexes (Metal = Pt, Pd) with multiple conductance pathways in single-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Chelli, Yahia
  • Daaoub, Abdalghani H. S.
  • Cea, Pilar
  • Martin, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Sadeghi, Hatef
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 3,5-bis(pyridin-2-yl)phenyl (N^C^N) platinum and palladium complexes on their electron transmission properties within gold|molecule|gold junctions. The ligands 3,5-bis(4-(methylthio)pyridin-2-yl)phenyl hexanoate (LmH) and 3,5-bis(5-(methylthio)pyridin-2-yl)phenyl hexanoate (Lp H) were synthesized and coordinated with either PtCl or PdCl to form complexes Ptm, Ptp, Pdm and Pdp. X-ray photoelectron spectroscopy (XPS) measurements evaluated the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy-break junction (STM-BJ) measurements and density functional theory (DFT) calculations demonstrate that for the single-molecule S···S contacted junctions metal coordination enhanced the conductance compared with the free ligands. Notably, the higher degree of orbital mixing between the metal center and the ligand π-orbitals in the metal complexes plays a greater role than quantum interference to the extent that the complexes that incorporate ligands substituted with thiomethyl groups in meta positions relative to the pyridine-benzene linkages have a higher conductance than their para-analogs, e.g., Ptp −3.8 log(G/G0) and Ptm −3.3 log(G/G0), in contrast to the usual conductance trend (para > meta) for purely organic π-electron systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martín, Santiago
  • Sorribes, Iván
  • García, Hermenegildo
  • Mata, José A.
The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 ± 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Oleic acid: geraniol or cinnamyl alcohol hydrophobic mixtures: thermophysical properties and quercetin solubility

  • Gavín, Ana
  • Juan, Daniel
  • Muñoz-Embid, José
  • Haftbaradaran Esfahani, Mohammadreza
  • Lafuente, Carlos
  • Artal, Manuela
The low solubility of drugs and nutraceuticals in water decreases their bioavailability, which poses a serious challenge to the biotechnology industry. To improve this, several mixtures have been proposed. Here, the solubility and antioxidant capacity of quercetin in binary mixtures of oleic acid with geraniol and cinnamyl alcohol are determined. As a preliminary step, phase changes and thermophysical properties are discussed and modelled with the PC-SAFT EoS. The densities were between 6% at 283.15 K and 11% at 338.15 K lower than those of water. The surface tensions and viscosities were moderate and also decreased as the temperature increased. The equation of state correctly predicted the density and heat capacity, with average deviations less than 0.32% and 1.9%, respectively. The solubility of quercetin was favored in both mixtures. A synergistic effect on the antioxidant capacity was observed in the mixture with geraniol, which was the least compact.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Thermophysical characterization of substances used as flavorings

  • Martín-Ramo, Roberto
  • Romero, Candela
  • Muñoz-Embid, José
  • Artigas, Héctor
  • Lafuente, Carlos
  • Artal, Manuela
Essential oils possess numerous health benefits. Their components, often terpene and aromatic compounds, are characterized by a distinctive aroma and flavor. Consequently, they are widely used in the food, cosmetic, and pharmaceutical industries. However, their comprehensive thermophysical characterization is still lacking, which is fundamental for the optimal operational design of the processes in which they are used. In this work, the density, speed of sound, refractive index, isobaric molar heat capacity, surface tension, and viscosity of five flavorings were determined and discussed. The studied substances were anisyl alcohol, linalool, β-citronellol, citronellal, and eucalyptol. Except for the first one, the others exhibited densities lower than that of water. Anisyl alcohol was also the most compact and viscous compound. The results were explained based on the structure (number of donor and acceptor sites and geometry) of the compounds. Furthermore, the PC-SAFT parameters of the pure compounds were obtained to predict their thermodynamic behavior under any experimental conditions. The deviations in the modeling of density and isobaric molar heat capacity were less than 1.1% and 4.1%, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • De Teresa, José María
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Application of Ag-Enriched Nanostructures Through Ga+ Irradiation of Silver Butyrate Films in Surface-Enhanced Raman Spectroscopy (SERS)

  • Ocaña-Parral, Juan Ignacio
  • Herrer, Lucía
  • Tejedor, Inés
  • Salvador-Porroche, Alba
  • Barth, Sven
  • Cea, Pilar
  • Sangiao, Soraya
  • De Teresa, José María
Spin-coated films based on silver butyrate precursor solutions are submitted to focused Ga+ irradiation for the direct fabrication of Ag-enriched nanostructures. We report that, through the optimization of the solutions’ concentration, the spin-coating conditions, and the irradiation parameters, Ag-enriched patterned films with a tunable microstructure are obtained. In the case of a microstructure consisting of large and continuous Ag-enriched platelets, the patterned film is metallic, with resistivity down to 90 µΩ·cm. In the case of a microstructure consisting of small and discontinuous Ag-enriched nanoparticles, the corresponding patterned film is found to be suitable as a Surface-Enhanced Raman Spectroscopy (SERS) substrate. As proof of concept, the SERS signals produced by thiophenol solutions are measured and compared to a rough Ag film grown by sputtering, leading to a 200 times higher signal. Given the low Ga+ irradiation fluence required to produce tunable Ag nanostructures with metallic or SERS functionality, the obtained results highlight the potential of silver butyrate precursor solutions for the high-throughput printing of a nanomaterial with applications in nanoelectronics (metallic interconnects) and nanophotonics (SERS substrates).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

From catalyst design to recycling studies for the analysis of sodium formate/bicarbonate as a practical system for hydrogen storage

  • Arroyas, Lidón
  • Mollar-Cuni, Andrés
  • Mejuto, Carmen
  • Martín, Santiago
  • Sorribes, Iván
  • Mata, Jose A.
In this manuscript we evaluate the practical advantages and limitations of sodium formate/bicarbonate pair as a Hydrogen Carrier (HC). The catalyst is a hybrid material composed of palladium nanoparticles (PdNPs) supported on carbon-nitride (g-C3N4), prepared in a single-step synthesis that provides well-defined and homogeneously distributed nanoparticles. The catalytic performance of PdNPs@C3N4 was investigated in the dehydrogenation of sodium formate under aqueous conditions, showing moderate activity and good stability over multiple reuse cycles. The same catalyst is also effective for the reverse reaction, i.e. the sodium bicarbonate hydrogenation, demonstrating its bidirectional catalytic capability. Catalyst performance and stability were further evaluated through alternating cycles of formate dehydrogenation and bicarbonate hydrogenation, achieving four complete cycles without significant deactivation. Mechanistic insights, supported by labelling deuterium experiments, provide experimental evidence of a plausible pathway involving heterolytic water activation facilitated by the nitrogen-rich support.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards scalable high-performance molecular electronics devices based on diketopyrrolopyrrole derivatives

  • Bonastre, José María
  • Giglio, Maria Elisabetta
  • Mas-Torrent, Marta
  • Davidson, Ross J.
  • Beeby, Andrew
  • Cea, Pilar
  • Crivillers, Núria
  • Martin, Santiago
Large-area molecular junctions offer a promising pathway toward the scalable implementation of molecular electronic devices, where charge transport is strongly governed by molecular structure and supramolecular organization. In this work, two diketopyrrolopyrrole (DPP) derivatives featuring tailored alkyl chain lengths designed to isolate the DPP moiety from the anchor groups, are used to form well-ordered Langmuir–Blodgett (LB) films. By bridging the gap between single-molecule behavior and collective transport in large-area devices, molecular junctions were first characterized using the ‘scanning tunneling microscopy (STM) touch-to-contact’ method. These junctions exhibit higher conductance than conventional single molecule I(s) measurements, attributed to intermolecular charge-transfer processes enabled by the ordered LB assemblies. Consistent with this enhanced conductance, low transition voltages (Vtrans) indicate favorable alignment between the metal electrode Fermi level and the frontier molecular orbitals. To assess device-relevant performance, large-area molecular junctions were fabricated using Eutectic Gallium–Indium (EGaIn) alloy as a soft top electrode. These junctions exhibit high yield and reproducibility, confirming the formation of robust and high-quality junctions that mirror the transport behavior observed at the single-molecule scale. Together, these results establish a consistent transport picture across both small- and large-area junctions identifying the DPP moiety as a highly effective molecular wire. This effectiveness stems from the capability of these DPP derivatives to form well-ordered films exhibiting intermolecular charge-transfer processes, which, combined with a favorable energy-level alignment with the electrodes, ultimately results in high device conductance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring the structure, thermophysical properties, and solvent capacity of the pure cinnamyl alcohol, and its hydrophobic eutectic mixtures with thymol

  • Haftbaradaran Esfahani, Mohammadreza
  • Delso, Ignacio
  • Artigas, Héctor
  • Lafuente, Carlos
  • Artal, Manuela
Eco-sustainable alternative solvents, particularly eutectic mixtures, constitute a key platform within green chemistry. In this study, thermophysical properties of pure cinnamyl alcohol and cinnamyl alcohol:thymol mixtures were measured, modelled, and discussed. The structure and solvent capacity of the mixtures were also analyzed. Nuclear magnetic resonance experiments showed prevalence of the hydrophobic intermolecular interactions and minimal aggregation. Experimentally measured densities, surface tensions, and viscosities were below 1050 kg·m−3, 43 mN·m−1, and 30 mPa·s, respectively, and decreased as the thymol mole fraction increased. A predominant parallel orientation of adjacent dipoles was also observed. The solubility of the active pharmaceutical ingredients studied in cinnamyl alcohol:thymol eutectic solvents was much higher than in water. Except for carvedilol, the solubility (in mole fraction) increased with the cinnamyl alcohol ratio. Overall, the results identify pure cinnamyl alcohol and cinnamyl alcohol:thymol mixtures as promising eco-friendly solvents with significant potential for improving the solubility of poorly soluble pharmaceuticals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Topology modulation in Ni(ii) helicates through SiF62−-directed self-assembly

  • Swain, Abinash
  • Martínez, Jordi
  • Roubeau, Olivier
  • Antkowiak, Michal
  • Mallah, Talal
  • Novikov, Valentin
  • Nelyubina, Yulia
  • Barrios, Leoní A.
  • Aromí, Guillem
A remarkable template effect exerted by the SiF62− anion directs the self-assembly of a rare heteroleptic triple-stranded helicate, (SiF6@[Ni2(L1)(L2)2])2+, and of the unprecedented tetranuclear architecture ((SiF6)2@[Ni4(L1)6])4+ (L1 and L2 are bis(pyrazolyl)pyridine ligands). Guest symmetry, reinforced by highly directional F⋯H–N hydrogen bonds, dictates the composition and topology of the resulting supramolecular assemblies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Solid-state spin dynamics of a molecular qubit of Ce3+

  • Serrano-Guarinos, José
  • Hosseinzadeh, Zahra
  • Swain, Abinash
  • Aguilà, David
  • Barrios, Leoní A.
  • Nelyubina, Yulia
  • Ribas-Ariño, Jordi
  • Roubeau, Olivier
  • Novikov, Valentin
  • Aromí, Guillem
A Ce3+ ion is the qubit of a molecular coordination compound with a [ErCeEr] core that was reported as a platform for the implementation of the three qubit (TQC) repetition code for quantum error correction, by exploiting its interaction with two Er3+ ancillary qubits. We report here a detailed study of the spin dynamics of this Ce3+ qubit by embedding it within [LuCeLu] derivatives of a molecular analogue of the error protected qubit. In these novel molecules the magnetic influence of the Er3+ ancillary qubits is suppressed by replacing them with diamagnetic Lu3+ ions. The pure site-selective heterometallic nature of these molecules is demonstrated and their magnetization dynamics is studied with SQUID measurements. Most notably, the spin dynamics of the qubits are investigated with X-band pulsed EPR in the solid state and their quantum coherence thus quantified. This is achieved by doping molecules of the qubit within an isostructural diamagnetic crystal lattice made of the [LuLaLu] analogue. The solid solution is accessed by co-crystallization of two different [LnLn′Ln] molecules. Their required stability in solution is here unambiguously demonstrated by paramagnetic 1H NMR and mass spectrometry. The influence of the ligand scaffold around the [LuCeLu] metal core on the quantum coherence of the Ce3+ center is discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

MetalloporphyrinZr-MOF Nanoparticles Film for DeviceIntegration of Spin Qubits and Qudits

  • Serrano-Oiza, Javier
  • Tejedor, Inés
  • Natividad, Eva
  • Hemmerle, Arnaud
  • Fontaine, Philippe
  • Novikov, Valentin
  • Aromi´, Guillem
  • Gascón, Ignacio
  • Roubeau, Olivier
Integration of molecular spin qubits onto superconducting circuits is one of the current proposals to build a hybrid quantum processor, in which their coupling to resonators would allow complex coherent quantum operations. As an alternative to large magnetically dilute crystals or concentrated nanoscale deposits of paramagnetic molecules studied so far, we consider here preformed nanoparticles of a Zr(IV)-based 3D MOF doped with Cu(II) and V(IV)O metalloporphyrin. Highly crystalline, phase-pure nanoparticles are obtained with an adjustable number of spin carriers and a homogeneous size that is adequate for nanoconstrictions in superconducting resonators. Continuous-wave and time-domain EPR spectroscopy show that the Cu(II) and V(IV) spins in these particles are potential qubits and qudits, respectively, with robust quantum coherence. These nanoparticles form good dispersions in methanol-chloroform mixtures, which allows the formation of monolayers of densely packed particles at the air–water interface. These Langmuir films are successfully transferred to very different substrates, including Nb resonators, homogeneously covering their most sensitive areas, i.e., the edges of the superconducting lines. Finally, the quantum coherence of the qubit nodes is maintained in the transferred nanoparticles, thereby demonstrating the viability of the present approach for the development of hybrid quantum processors.