Skip to main content

HETEROUNION ENTRE PEROVSKITA HIBRIDA Y NANOCRISTALES PARA CELDA SOLAR CON ABSORCION EXTENDIDA Y EFICIENCIA MEJORADA

PID2019-107893RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Earth-abundant non-toxic perovskite nanocrystals for solution processed solar cells

  • Aina, Sergio
  • Villacampa, Belén
  • Bernechea, María
Semiconductor nanocrystals, used in quantum dot solar cells, are interesting materials for photovoltaics because they can be obtained in solution and can be composed of abundant elements. Moreover, as compared to other photovoltaic materials, nanomaterials show unique features due to their novel size- and shape-dependent properties such as band gap tuning, multiple exciton generation, and modulation of n- or p-type behaviour by doping or by modifying the ligands on the surface of the nanocrystals. Quantum dot solar cells, together with perovskite solar cells, are the latest incorporation to photovoltaic technologies and have already shown impressive progress in efficiencies and great promise as alternatives to commercial solar cells. However, in all cases, the highest efficiencies are obtained with materials that contain lead in their composition. To solve the problem of toxicity, several materials have been proposed as substitutes. In this review, we summarize some of the non-toxic alternatives that have been synthesized as nanocrystals and incorporated in photovoltaic solar cells, specifically: tin (Sn), germanium (Ge), bismuth (Bi), and antimony (Sb)-based materials. Our findings show that this field has been scarcely covered; there are very few reports on non-toxic perovskite nanocrystals incorporated in solar cells and in general, the efficiencies are still modest. However, this area deserves more attention since some nanocrystal-based solar cells already outperform bulk counterparts. For each case, we also discuss factors limiting efficiency, the approaches followed to overcome these limitations, and the possible solutions to improve efficiency., Authors acknowledge Fundación Iberdrola España, CIBER-BBN (financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund), the ICTS “NANBIOSIS”, Agencia Estatal de Investigación-AEI (Ref. PID2019-107893RB-I00 and PID2019-104307GB-I00), and Gobierno de Aragón (Ref. T57_20R and E47_20R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of oxidation temperature on the properties of NiOx layers for application in optical sensors

  • Castillo-Saenz, Jhonathan
  • Nedev, Nicola
  • Valdez-Salas, Benjamín
  • Bernechea, María
  • Martínez-Guerra, Eduardo
  • Mendívil, María Isabel
  • Curiel-Alvarez, Mario
  • Mateos, David
  • Perez-Landeros, Oscar M.
Thin NiOx layers were prepared by oxidation at 400, 500 and 600 °C of metallic Ni deposited by electron beam evaporation. The bandgap of NiOx determined from optical measurements increases from 3.6 to 3.7 eV with the increase of oxidation temperature from 400 to 500°C. Higher temperature leads to larger grain sizes, 12.6 nm at 400 °C, 15.3 nm at 500 °C and 16.1 nm 600 °C. Photodiodes based on NiOx/Si heterostructure were fabricated by evaporation of semitransparent Au top contacts. The structures with NiOx obtained at 500 °C showed superior diode characteristics compared to the other two types of devices with dark current < 3.5 × 10-8 A (current density J < 3.9 × 10−4 A/cm2) for reverse biases between 0 and -2 V and forward current of 3.3 × 10−5 A (J = 0.36 A/cm2) at bias of 1.5 V. The responsivity of these devices at 0 V is between 0.85 and 0.55 A/W for wavelengths in the 365 – 635 nm range, values higher than those previously reported for self-powered NiOx/Si photodiodes. The responsivity at reverse bias of -1.5 V increases more than 60 times to values of 33, 32, 50 and 59 A/W for red, green, blue, and ultraviolet light, values among the highest reported for broadband photodetectors. The excellent properties of the photodiodes with NiOx obtained at 500 °C are the result of a higher quality of the Si/NiOx interfacial region, which leads to lower recombination rate of the photogenerated carriers., JRC gratefully acknowledges the National Council for Science and Technology (CONACYT), Mexico for a Ph.D. fellowship. MB acknowledges Fundación Iberdrola España, CIBER-BBN, the ICTS “NANBIOSIS”, and Agencia Estatal de Investigación-AEI (PID2019-107893RB-I00) for financial support. This work was partially supported by Proyecto Bilateral Conacyt-AFOSR CC0015-2016-05-279915 “Single Crystal and Thin Film Hybrid Perovskite Materials for Optoelectornic Applications”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw-Ndiaye, Fatou
  • Furgeaud, Clarisse
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
13 figures, 6 tables.-- Supplementary information available., Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells., E.J.J-P acknowledges the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). M.H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I) and the project PID2019-108247RA-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739 GB-100/AEI/10.13039/501100011033). RA also acknowledge to Government of Aragon (project DGA E13-20R (FEDER, EU)) and European Union H2020 program “ESTEEM3” (823717). A.A-C acknowledges financial support from Spanish MCIN/AEI/10.13039/501100011033 under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic-level understanding of a formamidinium hybrid halide perovskite, FAPbBr3

  • Li, Chengmin
  • Juárez-Pérez, Emilio J.
  • Mayoral, Álvaro
Herein, we show how electron microscopy can provide atomic-level understanding of FAPbBr3, where electron diffraction and high-resolution imaging were combined allowing not only the characterization of the pristine material but also the identification of different intermediates upon its structural disintegration. Additionally, a minor tetragonal phase was also identified whose structure was also solved., Funding support has been received from the MCIN (RYC2018-024561-I) and DGA (E13_20R), the European Union's Horizon 2020 research and innovation programme (823717 – ESTEEM3), the NFSC (21850410448 and 21835002) and The Centre for High-resolution Electron Microscopy (CħEM), ShanghaiTech University (EM 02161943). E. J. J.-P. acknowledges MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR (PID2019-107893RB-I00 and EIN2020-112315, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solar energy storage using a Cu2O-TiO2 photocathode in a lithium battery

  • Ciria-Ramos, Isabel
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A Cu2O-TiO2 photoelectrode is pr+oposed for simultaneous solar light energy harvesting and storing of electrochemical energy in an adapted lithium coin cell. The p-type Cu2O semiconductor layer is the light harvester component of the photoelectrode and the TiO2 film performs as the capacitive layer. The rationale of the energy scheme shows that the photocharges generated in the Cu2O semiconductor induce lithiation/delithiation processes in the TiO2 film as a function of the applied bias voltage and light power. A photorechargeable lithium button cell drilled on one side recharges with visible white light in ≈9 h in open circuit. It provides an energy density of ≈150 mAh g−1 at 0.1 C discharge current in dark, and the overall efficiency is 0.29%. This work draws a new approach for the photoelectrode role to advance in monolithic rechargeable batteries., M.H. acknowledges the funding support from MCIN/ AEI/10.13039/501100011033 and European Union "ESF Investing in your future" for the Ramón y Cajal fellowship (RYC2018-025222-I) and the project PID2019-108247RA-I00. E.J.J.-P. acknowledges the funding support from MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/ PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). The authors also acknowledge the Diputación General de Aragón under the projects LMP71_21, E31_20R (M.H. and I.C.-R.) and T57_20R (E.J.J.-P.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juárez-Pérez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices., Authors acknowledge the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR for project grants PID2022-140516OB-I00 (E.J.J.-P. and M.H.), PID2019-107893RB-I00 (E.J.J.-P.), PID2020-116011RB-C22 (R.C.), EIN2020-112315 (E.J.J.-P.), and PID2019-108247RA-I00 (M.H.) and fellowships from Ramón y Cajal (RYC-2018-025222-I; M.H.) and Juan de la Cierva Incorporación (IJC-2020-044684-I; C.M.) Also, authors acknowledge the funding support from the Aragon Regional Government for the Program for Research Groups under grant: T57_23R (E.J.J.-P. and C.M.), E31_20R (M.H.), and T27_23R (R.C.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes., E. J. J.-P. and M. H. acknowledge the funding support from MCIN/AEI/10.13039/501100011033 for the project grant PID2022-140516OB-I00, E. J. J.-P. for the project grant PID2019-107893RB-I00, and M. H. for CNS2023-145197, PID2019-108247RA-I00, and her Ramón y Cajal fellowship (RYC-2018-025222-I). M. H, I. C.-R and E. J. J-P acknowledge the Diputación General de Aragón for projects E31_23R (M. H and I. C.-R.) and T57_23R (E. J. J.-P.). A. M. acknowledges the Spanish ministry of Science and Universities (RYC2018-024561-I, CNS2023-144346), and the Gobierno de Aragón (Nanomidas group, E13_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jeronimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions., The authors acknowledge the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR for project grants PID2022-140516OB-I00 (E.J.J.-P. and M.H.), PID2019-107893RB-I00 (E.J.J.-P.), EIN2020-112315 (E.J.J.-P.), and PID2019-108247RA-I00 (M.H.); a Ramón y Cajal fellowship (RYC-2018-025222-I; M.H.); and CPP2022-009766 (E.J.J.-P., A.S.-M., and R.J.-C.). Also, the authors acknowledge the funding support from the Aragon Regional Government for the Program for Research Groups under grants T57_23R (E.J.J.-P., A.S.-M., and R.J.-C.) and E31_20R (M.H.) and CIBER-BBN, ICTS “NANBIOSIS” (E.J.J.-P., A.S.-M., and R.J.-C.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimizing quantum dots integration for enhanced charge dynamics in carbon perovskite solar cells

  • Diaw-Ndiaye, Fatou
  • De Moor, Gilles
  • Perrin, Lara
  • Narbey, Stéphanie
  • Bernechea, María
  • Flandin, Lionel
  • Planes, Emilie
The data that support the findings of this study are available from the corresponding author upon reasonable request., Metal halide perovskites have reshaped the photovoltaic (PV) research, but their commercialization is hindered by limited stability and a spectral response confined to the visible range. This study explores the integration of CsPbBr3 quantum dots (QDs) with MAPbI3-base perovskites as a strategy to convert ultraviolet light into visible light, thus enhancing both power conversion efficiency (PCE) and operational stability. Two types of QDs—one synthesized at room temperature with short-chain ligands, the other commercially produced via hot injection with long-chain ligands—are compared to assess the influence of synthesis route and surface chemistry on device performance. Heterojunction solar cells are fabricated by drop-casting in ambient conditions, using a combination of QDs, MAPbI3 and the AVAI additive. Various integration methods (blending into the perovskite matrix, sequential deposition, and surface application) are investigated. Devices incorporating QDs show a PCE improvement of up to 11.8%, reaching 10.4% compared to 9.3% for the reference. Thanks to advanced characterization techniques, these results offer valuable insights into how the properties of quantum dots influence charge generation mechanisms, paving the way for more robust and scalable carbon-based perovskite solar cell technologies., Financial supports from UNITA (FD predoctoral contract, DESCOPENANO project), MICIU /AEI/10.13039/501100011033 (Grant: PID2019-107893RB-I00 and CEX2023-001286-S), the French Embassy in Spain (COPYN project), Universidad de Zaragoza (UZ2023-IyA-01 project), Savoie Mont-Blanc University yearly AAP (2023−2024), and Rhone-Alpes region AURA (DOTHIS project) are greatly acknowledged. Authors also thanks the platform of Consortium des Moyens Technologiques Communs (CMTC) of Grenoble INP for laboratory assistance (Thierry Encinas and Stéphane Coindeau), the Alternative Energies and Atomic Energy Commission (CEA) in Chambery (Philippe Voarino), CIBER-BBN, ICTS ‘“NANBIOSIS”’, instrumentation and technical advice provided by the National Facility ICTS ELECMI node “Laboratorio de Microscopias Avanzadas”, and Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward more scalable processes for perovskite solar cells: A comparison between planar and mesoporous architectures

  • Diaw-Ndiaye, Fatou
  • Perrin, Lara
  • Bernechea, María
  • Flandin, Lionel
  • Planes, Emilie
The data that support the findings of this study are available from the corresponding author upon reasonable request., Developing perovskite solar cells (PSCs) under ambient conditions remains challenging due to the material's sensitivity to oxygen and moisture. This study presents two types of PSCs fabricated entirely under ambient atmospheric conditions using different deposition techniques: spin coating and drop casting. Spin-coated cells were produced with a compact planar structure (C-PSC), while drop-cast cells utilized a mesoporous architecture (M-PSC), which not only lowers manufacturing costs but also reduces the environmental impact by limiting perovskite exposure to air during processing. Both architectures employed a CH3NH3PbI3 perovskite layer, stabilized with either chloride anion (Cl−) or ammonium valeric acid cation (AVA+) additives to enhance film stability. The maturation process of fresh cells was also investigated, revealing that M-PSC devices benefited from increased photovoltaic activity postmaturation. Functional cells were achieved, with the C-PSC_Cl devices reaching nearly 13% power conversion efficiency (PCE) and M-PSC_AVAI_m devices attaining a PCE of 10.7%. The M-PSCs also showed larger active areas and more consistent performance, underscoring their reproducibility and suitability for scaling. This study provides valuable insights into cost-effective and environmentally sustainable fabrication methods for PSCs, offering promising pathways for the large-scale manufacturing and deployment of PSC technologies., This study was funded by the UNITA (FD predoctoral contract, DESCOPE NANO project), MCIN/AEI/10.13039/501100011033 (Grant: PID2019-107893RB-I00), the French Embassy in Spain (COPYN project), Savoie Mont-Blanc University yearly AAP (2023-2024), and Rhone-Alpes region AURA (DOTHIS project)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Atomic-level understanding of a formamidinium hybrid halide perovskite, FAPbBr<sub>3</sub>

  • Li, Chengmin
  • Juarez-Perez, Emilio J.
  • Mayoral, Alvaro
Herein, we show how electron microscopy can provide atomic-level understanding of FAPbBr3 , where electron diffraction and high-resolution imaging were combined allowing not only the characterization of the pristine material but also the identification of different intermediates upon its structural disintegration. Additionally, a minor tetragonal phase was also identified whose structure was also solved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Solar energy storage using a Cu2O-TiO photocathode in a lithium battery

  • Ciria-Ramos, Isabel
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A Cu2O-TiO2 photoelectrode is pr+oposed for simultaneous solar light energy harvesting and storing of electrochemical energy in an adapted lithium coin cell. The p-type Cu2O semiconductor layer is the light harvester component of the photoelectrode and the TiO2 film performs as the capacitive layer. The rationale of the energy scheme shows that the photocharges generated in the Cu2O semiconductor induce lithiation/delithiation processes in the TiO2 film as a function of the applied bias voltage and light power. A photorechargeable lithium button cell drilled on one side recharges with visible white light in ≈9 h in open circuit. It provides an energy density of ≈150 mAh g−1 at 0.1 C discharge current in dark, and the overall efficiency is 0.29%. This work draws a new approach for the photoelectrode role to advance in monolithic rechargeable batteries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juarez-Perez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jerónimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions. For complete details on the use and execution of this protocol, please refer to Juarez-Perez et al.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Toward more scalable processes for Perovskite solar cells: a comparison between planar and mesoporous architectures

  • Diaw Ndiaye, Fatou
  • Perrin, Lara
  • Bernechea, María
  • Flandin, Lionel
  • Planes, Emilie
Developing perovskite solar cells (PSCs) under ambient conditions remains challenging due to the material's sensitivity to oxygen and moisture. This study presents two types of PSCs fabricated entirely under ambient atmospheric conditions using different deposition techniques: spin coating and drop casting. Spin-coated cells were produced with a compact planar structure (C-PSC), while drop-cast cells utilized a mesoporous architecture (M-PSC), which not only lowers manufacturing costs but also reduces the environmental impact by limiting perovskite exposure to air during processing. Both architectures employed a CH3NH3PbI3 perovskite layer, stabilized with either chloride anion (Cl−) or ammonium valeric acid cation (AVA+) additives to enhance film stability. The maturation process of fresh cells was also investigated, revealing that M-PSC devices benefited from increased photovoltaic activity postmaturation. Functional cells were achieved, with the C-PSC_Cl devices reaching nearly 13% power conversion efficiency (PCE) and M-PSC_AVAI_m devices attaining a PCE of 10.7%. The M-PSCs also showed larger active areas and more consistent performance, underscoring their reproducibility and suitability for scaling. This study provides valuable insights into cost-effective and environmentally sustainable fabrication methods for PSCs, offering promising pathways for the large-scale manufacturing and deployment of PSC technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Earth-abundant non-toxic perovskite nanocrystals for solution processed solar cells

  • Aina S.
  • Villacampa B.
  • Bernechea M.
Semiconductor nanocrystals, used in quantum dot solar cells, are interesting materials for photovoltaics because they can be obtained in solution and can be composed of abundant elements. Moreover, as compared to other photovoltaic materials, nanomaterials show unique features due to their novel size- and shape-dependent properties such as band gap tuning, multiple exciton generation, and modulation of n- or p-type behaviour by doping or by modifying the ligands on the surface of the nanocrystals. Quantum dot solar cells, together with perovskite solar cells, are the latest incorporation to photovoltaic technologies and have already shown impressive progress in efficiencies and great promise as alternatives to commercial solar cells. However, in all cases, the highest efficiencies are obtained with materials that contain lead in their composition. To solve the problem of toxicity, several materials have been proposed as substitutes. In this review, we summarize some of the non-toxic alternatives that have been synthesized as nanocrystals and incorporated in photovoltaic solar cells, specifically: tin (Sn), germanium (Ge), bismuth (Bi), and antimony (Sb)-based materials. Our findings show that this field has been scarcely covered; there are very few reports on non-toxic perovskite nanocrystals incorporated in solar cells and in general, the efficiencies are still modest. However, this area deserves more attention since some nanocrystal-based solar cells already outperform bulk counterparts. For each case, we also discuss factors limiting efficiency, the approaches followed to overcome these limitations, and the possible solutions to improve efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimizing quantum dots integration for enhanced charge dynamics in carbon perovskite solar cells

  • Diaw Ndiaye, Fatou
  • De Moor, Gilles
  • Perrin, Lara
  • Narbey, Stéphanie
  • Bernechea, María
  • Flandin, Lionel
  • Planes, Emilie
Metal halide perovskites have reshaped the photovoltaic (PV) research, but their commercialization is hindered by limited stability and a spectral response confined to the visible range. This study explores the integration of CsPbBr3 quantum dots (QDs) with MAPbI3‐base perovskites as a strategy to convert ultraviolet light into visible light, thus enhancing both power conversion efficiency (PCE) and operational stability. Two types of QDs—one synthesized at room temperature with short‐chain ligands, the other commercially produced via hot injection with long‐chain ligands—are compared to assess the influence of synthesis route and surface chemistry on device performance. Heterojunction solar cells are fabricated by drop‐casting in ambient conditions, using a combination of QDs, MAPbI3 and the AVAI additive. Various integration methods (blending into the perovskite matrix, sequential deposition, and surface application) are investigated. Devices incorporating QDs show a PCE improvement of up to 11.8%, reaching 10.4% compared to 9.3% for the reference. Thanks to advanced characterization techniques, these results offer valuable insights into how the properties of quantum dots influence charge generation mechanisms, paving the way for more robust and scalable carbon‐based perovskite solar cell technologies.