Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale charge density and dynamics in graphene oxide

  • Palacios-Lidón, E.
  • Colchero, J.
  • Ortuño, Miguel
  • Colom, E.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Somoza, Andrés M.
4 figures.-- Supplementary information available., Graphene oxide (GO) is widely used as a component in thin film optoelectronic device structures for practical reasons because its electronic and optical properties can be controlled. Progress critically depends on elucidating the nanoscale electronic structure of GO. However, direct experimental access is challenging because of its disordered and nonconductive character. Here, we quantitatively mapped the nanoscopic charge distribution and charge dynamics of an individual GO sheet by using Kelvin probe force microscopy (KPFM). Charge domains are identified, presenting important charge interactions below distances of 20 nm. Charge dynamics with very long relaxation times of at least several hours and a logarithmic decay of the time correlation function are in excellent agreement with Monte Carlo simulations, revealing an universal hopping transport mechanism best described by Efros–Shklovskii’s law., This research was financed by the Ministerio de Ciencia e Innovación and the Agencia Estatal de Investigación (MICINN/AEI, Spain) and associated Funds of the European Union through the projects “Nano and Meso Scales: Modelling, Structure and Characterization” (PID2019-104272RB-C52/AEI/10.13039/501100011033 and “Photoelectrochemical hydrogen production by optimized graphene-based interfaces” (PID2019-104272RB-C51/AEI/10.13039/501100011033) and the Fundación Séneca through the projects 19907/GERM/15 and 20860/PI/18, as well as the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R)., E.C. acknowledges funding of his predoctoral contract by Spanish MINEICO and associated European Social Funds (BES2017-080020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Puntos de carbono poliméricos. Síntesis y desarrollo de nuevos nanomateriales de carbono fluorescentes y su implicación en la producción de hidrógeno sostenible

  • Álvarez Sánchez, Miguel Ángel
  • Martínez-Barón, Carlos
  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
Póster presentado en el XVII Simposio de Investigadores Jóvenes de la RSEQ (2021), celebrado en la Universidad de Alcalá de Henares, 23-26 noviembre., Los puntos de carbono poliméricos, pertenecientes a la familia de puntos de carbono (del inglés Carbon Dots), han despertado gran interés en los últimos años por sus excelentes propiedades de fluorescencia, que se puede modificar para que emitan en un rango variado de longitudes de onda. Esto, sumado a su bajo coste de síntesis, gran estabilidad fotoquímica, facilidad de funcionalización, baja toxicidad, elevada biocompatibilidad y solubilidad en agua, los posicionan como una potente alternativa a los puntos cuánticos convencionales, en su mayoría tóxicos por la presencia de metales pesados. Por todo ello, estos materiales resultan muy prometedores para aplicaciones en una gran variedad de campos, como son la biomedicina (diagnóstico, terapia, detección), la fotocatálisis (degradación de contaminantes) y la energía (fotovoltaica) entre otros. Los puntos poliméricos comúnmente emiten en el azul y su mecanismo de fluorescencia ha sido estudiado en profundidad. [5] Sin embargo, se han reportado pocos ejemplos de puntos poliméricos con una emisión de fluorescencia desplazada hacia el rojo. En este trabajo se presenta la producción, optimización y caracterización de puntos poliméricos solubles en agua, con fluorescencia en el verde y elevado rendimiento cuántico. Además, estos puntos poliméricos, implementados sobre un fotoánodo de óxido de titanio, han mejorado la fotoactividad del mismo para procesos de producción limpia de hidrógeno por escisión fotoelectroquímica del agua., Este trabajo ha sido financiado por MICINN/AEI con el proyecto PID2019-104272RB-C51/AEI/10.13039/50110 0 011033 y por el gobierno de Aragón, grupos reconocidos DGA-T03_20R. Agradecimientos a la DGA por la financiación del contrato predoctoral para el periodo 2019-2023., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocristales de quitina: Síntesis, caracterización y aplicaciones de un nanomaterial sostenible

  • Calvo Peña, Víctor
  • Ulcuango, Matías
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en el XVII Simposio de Investigadores Jóvenes RSEQ, 23-26 noviembre 2021, celebrado en Alcalá de Henares., Los biopolímeros nanoestructurados tienen propiedades excepcionales, se extraen de fuentes naturales y tienen el potencial de sustituir plásticos de fuentes no sostenibles, como el petróleo. Estas cualidades se deben a su tamaño en la nano-escala (entre 1 y 100 nm), siendo el más investigado la nanocelulosa en sus distintas variedades. La quitina es el segundo biopolímero más abundante tras la celulosa y se encuentra en distintos seres vivos, por ejemplo, en los exoesqueletos de crustáceos y artrópodos, aportando rigidez y dureza. [3] La quitina se puede transformar en nanocristales de quitina (NCQ) a través de un proceso de hidrólisis ácida. [4] Distintas aplicaciones de los NCQ son la estabilización eficiente en agua de nanomateriales de carbono, la preparación de aerogeles o su uso como refuerzo de otros materiales. En este trabajo se presenta un método optimizado para la obtención de NCQ dispersos en agua con un rendimiento superior al 60% frente al 30% del método inicial. Se han caracterizado por diversas técnicas como difracción de rayos X, termogravimetría o microscopía de transmisión electrónica. Se ha probado también la capacidad de redispersión de los NCQ tras liofilizarlos, obteniendo una dispersión de calidad similar tras un proceso sencillo basado en ultrasonidos, lo cual no sucede con otros biopolímeros nanoestructurados, como los nanocristales de celulosa. Se ha probado el uso de estos NCQ como dispersante en tintas tanto de nanotubos de carbono de una sola capa como de nanofibras de carbono y su integración in situ y ex situ como refuerzo en xerogeles de nanocelulosa bacteriana. En definitiva, la presente comunicación demuestra el enorme potencial de los NCQ como agente dispersante, refuerzo, y aditivo sostenible para obtener desde una perspectiva verde una variedad de nanomateriales compuestos., Financiación del MICINN/AEI bajo los proyectos PID2019-104272RB-C51/AEI/10.13039/501100011033 y PID2020-120439RA-I00, y del Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R). Víctor C. agradece a la DGA por la financiación de su contrato predoctoral (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rational description and modelling of the separation of nanotubes from solid nanoparticles in centrifugation processes

  • Ciria, José Carlos
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 figures, 3 tables.-- Supplementary information available., Centrifugation of liquid dispersions is a typical technique being employed to separate single-walled carbon nanotubes (SWCNTs) from big aggregates and impurities. Shining light on the underlying mechanism contributes to a more efficient preparation of corresponding suspensions or inks with improved properties. In this work, we model the sedimentation process by applying fundamental equations and a mathematical algorithm for the centrifugation routine, which takes into account centrifugation parameters and the geometry of nanoparticles. The model is fed with experimental data, namely, the centrifugation mass yield, the SWCNT purity index, metal contents, and nanoparticle sizes measured for pristine, thermally-oxidized, and chemically functionalized SWCNT samples. Particle aggregation, including SWCNT bundling, and changes due to physicochemical pretreatments are taken into account. It is shown that the complete experimental data set can be quantitatively well understood in terms of the particle sedimentation coefficient. The proposed model thus provides a rational concept to optimize centrifugation protocols for the separation of mixtures containing nanoparticles of different shapes., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and processing of nanomaterials mediated by living organisms

  • Calvo Peña, Víctor
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 figures, 1 scheme., Green living nanofactories: Nanomaterials (NMs) and nanocomposites are typically prepared by procedures that are incompatible with green chemistry and sustainability principles. But some living entities, from single cells to higher organisms, are able to synthesize and process NMs very efficiently under milder conditions. In this Minireview, the advances and prospects of this growing trend are discussed and summarized., Nanomaterials offer exciting properties and functionalities. However, their production and processing frequently involve complex methods, cumbersome equipment, harsh conditions, and hazardous media. The capability of organisms to accomplish this using mild conditions offers a sustainable, biocompatible, and environmentally friendly alternative. Different nanomaterials such as metal nanoparticles, quantum dots, silica nanostructures, and nanocellulose are being synthesized increasingly through living entities. In addition, the bionanofabrication potential enables also the in situ processing of nanomaterials inside biomatrices with unprecedented outcomes. In this Minireview we present a critical state-of-the-art vision of current nanofabrication approaches mediated by living entities (ranging from unicellular to higher organisms), in order to expand this knowledge and scrutinize future prospects. An efficient interfacial interaction at the nanoscale by green means is within reach through this approach., Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R) is acknowledged. V.C. gratefully thanks the DGA for funding his PhD contract (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fabricación de electrodos fotoactivos para la escisión de la molécula de agua a partir de tintas basadas en nanocelulosa

  • Martínez-Barón, Carlos
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., Financiación de MICINN y AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033), y Gobierno de Aragón (Grupo Reconocido GCNN T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez, Silvia
  • Sierra, Tania
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillén, Agustín G.
  • Escarpa, Alberto
4 figures, 2 tables., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L−1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been financially supported by the TRANSNANOAVANSENS program from the Community of Madrid (P2018/NMT-4349), and the Spanish Ministry of Economy and Competitiveness (CTQ2017-86441-C2-1-R). Additional funding support was from Spanish MINEICO/MICINN under project with references ENE2016-79282-C5-1-R (AEI/FEDER/UE), PID2019-104272RB-C51/AEI/10.13039/501100011033, and PID2020-120439RA-I00. Funding support from Gobierno de Aragón (Grupo Reconocido T03_20R) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intrinsic and selective activity of functionalized carbon nanotube/nanocellulose platforms against colon cancer cells

  • González Domínguez, José Miguel
  • Grasa, Laura
  • Frontiñán-Rubio, Javier
  • Abás, Elisa
  • Domínguez Alfaro, Antonio
  • Mesonero, José Emilio
  • Criado, A.
  • Ansón-Casaos, Alejandro
13 figures, 2 tables.-- Supplementary information available., Given their large surface area and versatile chemical reactivity, single-walled carbon nanotubes (SWCNTs) are regarded as the basis of new pharmacological complexes. In this study, SWCNTs are chemically functionalized with fluorescein, folic acid, and capecitabine, a drug that is commonly used against colorectal cancer. These functionalized SWCNTs are dispersed in water by taking advantage of their synergistic interaction with type-II nanocrystalline cellulose (II-NCC), and the resulting colloidal system is tested in vitro on both normal (differentiated) and cancerous (proliferative) human colon cells (Caco-2). The functionalized SWCNT/II-NCC hybrids show a higher activity than the reference (capecitabine) against the Caco-2 cancer cell line. However, this effect appears to be intrinsically associated with the SWCNT/II-NCC complex, particularly boosted by fluorescein, as the presence of capecitabine is not required. In addition, confocal microscopy fluorescence imaging using cell cultures highlights the enormous potential of this nanohybrid platform for colon cancer theranostics., This research was funded by the regional government of Aragón, DGA (Grupos Reconocidos DGA-T03_17R, DGA-T03_20R and DGA-A20_20R), together with associated EU Regional Development Funds, and also the Spanish MINEICO through a “Juan de la Cierva Incorporación” contract, and their associated research funds (ref. IJCI-2016–27789). A.C. thanks the Xunta de Galicia for an “Atracción de Talento” research grant (no. ED431H 2020/17)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Aerogeles unidireccionales de óxido de grafeno como soporte de electrocatalizadores

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
Póster presentado en la 9ª Jornada de Jóvenes Investigadores de Física y Química de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021., El traslado de propiedades del grafeno hacia estructuras 3-D es de gran interés para la catálisis, electrocatálisis y el almacenamiento de energía. Sin embargo, el grafeno es proclive a apilarse, perdiendo sus propiedades y disminuyendo el área superficial. Los aerogeles de grafeno pueden evitar el problema del apilamiento, logrando mantener propiedades fundamentales como un gran área superficial, gran porosidad para la difusión de moléculas grandes, flexibilidad, resistencia mecánica y conductividad eléctrica. Aquí presentamos un método sintético para producir aerogeles de óxido de grafeno reducido (rGO) controlando la porosidad y la estructura interna, para su uso como soporte de electrocatalizadores en la reacción de evolución de hidrógeno (HER)., MICINN/AEI. PID2019-104272RB-C51/AEI/10.13039/501100011033 Grupo Reconocido DGA T03_20R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Catalytic activity of MWCNT-based inks synthetized by different methods

  • Lorca, Sebastián
  • Santos, Florencio
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Álvarez Sánchez, Miguel Ángel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Abstract of the poster presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemistry Group of the Spanish Royal Society of Chemistry and 1st French-Spanish Atelier/Workshop on Electrochemistry, Paris (July 6 - 9, 2021)., Research on new catalyst materials for the oxygen reduction reaction (ORR) is the main goal for many research groups around the world, due to its application in fuel cells and metal/air batteries. ORR mainly occurs by two pathways, in alkaline media, the direct four-electron transfer pathway from O2 to OH- or in a two-steps mechanism, where hydrogen peroxide (HO2-) is formed in the first reaction. On fuel cells and metal air batteries applications, the catalyst must be optimized to get the oxygen reduced directly to water through the 4 electrons mechanism1. Due to high price of the precious metals, new materials are tested to be used as catalyst in ORR. Among them, researchers have focused their attention mainly on metal oxides, perovskites or carbonaceous materials. In this communication, we have studied four carbonaceous-based inks synthetized by ultrasonic or hydrothermal methods2, using a rotating ring-disk electrode (RRDE) (Figure 1.A). The production of HO2- (%HO2-), transferred electrons and others parameters will be analyzed and the results will be discussed in depth. Finally, the inks were used as catalysts in the cathode of a PVA-KOH-based zinc/air batteries to replace the most widely used catalyst to date, MnO2, The authors thank the financial support from Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18 and 19882-GERM-15), Spanish Agencia Estatal de Investigación (PID2019-104272RB-C55/ AEI/10.13039/501100011033 and PID2019-104272RB-C51/AEI/10.13039/501100011033), and Gobierno de Aragón (DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocristales de quitina y sus híbridos funcionales con potenciales aplicaciones en energía y sostenibilidad

  • Calvo Peña, Víctor
  • Ulcuango, Matías
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en la 9ª Jornada de Jóvenes Investigadores de Física y Química de Aragón, celebrada el 16 de diciembre de 2021 en Zaragoza., Los biopolímeros nanoestructurados tienen propiedades excepcionales, se extraen de fuentes naturales y tienen el potencial de sustituir plásticos de fuentes no sostenibles, como el petróleo. Estas cualidades se deben a su tamaño en la nano-escala (entre 1 y 100 nm), siendo el más investigado la nanocelulosa en sus distintas variedades [1,2]. La quitina es el segundo biopolímero más abundante tras la celulosa y se encuentra en distintos seres vivos, por ejemplo, en los exoesqueletos de crustáceos y artrópodos, aportando rigidez y dureza [3]. La quitina se puede transformar en nanocristales de quitina (NCQ) a través de un proceso de hidrólisis ácida [4]. Distintas aplicaciones de los NCQ son la estabilización eficiente en agua de nanomateriales de carbono, la preparación de aerogeles o su uso como refuerzo de otros materiales [5,6]. En este trabajo se presenta un método optimizado para la obtención de NCQ dispersos en agua con un rendimiento superior al 60% frente al 30% del método inicial. Se han caracterizado por diversas técnicas como difracción de rayos X, termogravimetría o microscopía de transmisión electrónica. Se ha probado también la capacidad de redispersión de los NCQ tras liofilizarlos, obteniendo una dispersión de calidad similar tras un proceso sencillo basado en ultrasonidos, lo cual no sucede con otros biopolímeros nanoestructurados, como los nanocristales de celulosa. Se ha probado el uso de NCQ como dispersante en tintas tanto de nanotubos de carbono como de nanofibras de carbono y su integración in situ y ex situ como refuerzo en xerogeles de nanocelulosa bacteriana. En definitiva, la presente comunicación demuestra el enorme potencial de NCQ como agente dispersante, refuerzo, y aditivo sostenible para obtener desde una perspectiva verde una variedad de nanomateriales compuestos., Financiación del MICINN/AEI bajo los proyectos PID2019-104272RB-C51/ AEI/10.13039/501100011033 y PID2020-120439RA-I00, y del Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R). Víctor C. agradece a la DGA por la financiación de su contrato predoctoral (Ref. CUS/581/2020).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw-Ndiaye, Fatou
  • Furgeaud, Clarisse
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
13 figures, 6 tables.-- Supplementary information available., Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells., E.J.J-P acknowledges the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). M.H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I) and the project PID2019-108247RA-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739 GB-100/AEI/10.13039/501100011033). RA also acknowledge to Government of Aragon (project DGA E13-20R (FEDER, EU)) and European Union H2020 program “ESTEEM3” (823717). A.A-C acknowledges financial support from Spanish MCIN/AEI/10.13039/501100011033 under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Titanium dioxide electrodes for water photo-electrolysis: modelling of photoelectrochemical processes

  • Ansón-Casaos, Alejandro
  • Ciria, José Carlos
  • Martínez-Barón, Carlos
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of the work presented at the EHEC 2022, European Hydrogen Energy Conference 18-20 May, 2022. Madrid, Spain., Solar photoelectrolysis of water is considered as a promising route towards green hydrogen production. Since its first demonstration in 1969 [1], improving the efficiency of the process remains the major challenge. Current research efforts focus on the development of improved photoelectrodes enabling higher photocurrents and larger solar-to-hydrogen conversion. Of special interest are photoactive semiconductors being used as photoanodes. Employing concepts of nanostructuring and doping combined with liquid phase technologies for constructing favorable layered configurations, metal oxides offer strategic advantages when it comes towards the use of abundant non-critical materials and sustainable fabrication of efficient large-area photoanodes. Deeper comprehension of the underlying photoelectrochemical processes provides the necessary feedback to a successful progress. In this presentation, boron-doped nanostructured TiO2 film electrodes are used as photoanode. We show that its photoelectrochemical performance can be successfully described by mathematical and physical models. This finding is of wider general interest to understand and improve the performance of nanostructured layered photoanode architectures., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/10.13039/ 501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Oxygen reduction reaction by cobalt dispersed on carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Carrera Jiménez, Clara
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura.-- Resumen del póster presentado en el IX International Symposium on Carbon for Catalysis, CARBOCAT, 28-30 junio 2022, Zaragoza, España., Transition metal modified carbon nanomaterials are being widely investigated as electrocatalysts for the oxygen reduction reaction, since they are promising candidates for the replacement of precious metal catalysts in fuel cells, as well as other applications. These materials possess a high versatility; depending on the preparation conditions, and subsequently, the structure and electronic environment of the supported cobalt (single site, nanoparticulate), high activities and selectivities may be achieved for both the four-electron and two-electron pathways. The nature of carbon support is also known to be of crucial importance in these materials [1]. Heteroatom inclusion (N-doping) and the porosity of the material are some of the key parameters than can be explored, and tailored towards the desired application. In this work, Multi-walled carbon nanotubes (MWCNTs, Nanocyl), electrochemically synthesized nitrogen-doped graphene quantum dots (NGQDs), and graphene aerogels (GA) were used as support for cobalt electrocatalysts., Ministerio de Ciencia e Innovación (PID2019-104272RB-C51/AEI/10.13039/501100011033 project), and Gobierno de Aragón (Grupo Reconocido T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrocatalytic water splitting on carbon dot/titania electrodes with methanol oxidation

  • Ansón-Casaos, Alejandro
  • Hernández Ferrer, Mariano
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure, 2 tables.-- Abstract of the poster presented at the 9th International Symposium on Carbon for Catalysis, IX CarboCat, 28th-30th June, Zaragoza, Spain., Short-chain alcohols such as methanol (MeOH) work well as hole scavengers in the photocatalytic water splitting on TiO2. Besides, MeOH is widely studied as a model pollutant in water. Both ideas are often combined to achieve efficient water purification processes with the simultaneous production of hydrogen. In this communication, we present a photoelectrochemical study on carbon dot (CD)/TiO2 electrodes., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/ 10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface-enriched boron-doped TiO2 nanoparticles as photocatalysts for propene oxidation

  • Cano Casanova, Laura
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
2 schemes, 8 figures.-- Supplementary information available., A series of nanostructured boron-TiO2 photocatalysts (B-X-TiO2-T) were prepared by sol–gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount (X) and crystallization temperature (T), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement. The presence of boric acid during the TiO2 synthesis hinders the development of rutile without affecting the textural properties. X-ray photoelectron spectroscopy analysis reveals the interstitial incorporation of boron into the surface lattice of the TiO2 nanostructure, while segregation of B2O3 occurs in samples with high boron loading, also confirmed by X-ray diffraction. The best-performing photocatalysts are those with the lowest boron loading. Their high activity, outperforming the equivalent sample without boron, can be attributed to a high anatase and surface hydroxyl group content and efficient photo-charge separation (photoelectrochemical characterization, PEC), which can explain the suppression of visible photoluminescence (PL). Crystallization at 450 °C renders the most active sample, likely due to the development of a pure anatase structure with a large surface boron enrichment. A shift in the wavelength-dependent activity profile (PEC data) and the lowest electron–hole recombination rate (PL data) are also observed for this sample., The authors thank funding to the Spanish Ministry of Science, Innovation and Universities and FEDER, project of reference RTI2018-095291-B-I00, GV/FEDER (PROMETEO/2018/076), and University of Alicante (VIGROB-136) for financial support. Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104272RB-C53/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Explosive percolation yields highly-conductive polymer nanocomposites

  • Meloni, Manuela
  • Large, Matthew J.
  • González Domínguez, José Miguel
  • Víctor-Román, Sandra
  • Fratta, Giuseppe
  • Istif, Emin
  • Tomes, Oliver
  • Savage, Jonathan P.
  • Ewels, Christopher P.
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • King, Alice A. K.
  • Ogilvie, Sean P.
  • Dalton, Alan B.
4 figures.-- The processed data used in this study are available in the Sussex Figshare database under https://doi.org/10.25377/sussex.21388851. Unprocessed data were available upon request from the corresponding author.-- Supplementary information available., Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties., This work was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 642742. A.B.D. acknowledges EPSRC Capital Award EP/S018069/1. W.K.M. and A.B. acknowledge support from Spanish MCIN/AEI under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Government of Aragon (DGA) under project “Grupos Consolidados” T03-20R., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-Deposited Carbon Aerogel Derived from Graphene Oxide Enables NO2-Selective Parts-per-Billion Sensing

  • Nufer, S.
  • Lynch, P.J.
  • Large, M.J.
  • Ogilvie, S.P.
  • Salvage, J.P.
  • Pelaez-Fernandez, M.
  • Waters, T.
  • Jurewicz, I.
  • Muñoz, E.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • Tagmatarchis, N.
  • Ewels, C.P.
  • Brunton, A.
  • Dalton, A.B.
Laser-deposited carbon aerogel is a low-density porous network of carbon clusters synthesized using a laser process. A one-step synthesis, involving deposition and annealing, results in the formation of a thin porous conductive film which can be applied as a chemiresistor. This material is sensitive to NO2 compared to ammonia and other volatile organic compounds and is able to detect ultra-low concentrations down to at least 10 parts-per-billion. The sensing mechanism, based on the solubility of NO2 in the water layer adsorbed on the aerogel, increases the usability of the sensor in practically relevant ambient environments. A heating step, achieved in tandem with a microheater, allows the recovery to the baseline, making it operable in real world environments. This, in combination with its low cost and scalable production, makes it promising for Internet-of-Things air quality monitoring.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanoscale Charge Density and Dynamics in Graphene Oxide

  • Palacios-Lidón, E.
  • Colchero, J.
  • Ortuno, M.
  • Colom, E.
  • Benito, A.M.
  • Maser, W.K.
  • Somoza, A.M.
Graphene oxide (GO) is widely used as a component in thin film optoelectronic device structures for practical reasons because its electronic and optical properties can be controlled. Progress critically depends on elucidating the nanoscale electronic structure of GO. However, direct experimental access is challenging because of its disordered and nonconductive character. Here, we quantitatively mapped the nanoscopic charge distribution and charge dynamics of an individual GO sheet by using Kelvin probe force microscopy (KPFM). Charge domains are identified, presenting important charge interactions below distances of 20 nm. Charge dynamics with very long relaxation times of at least several hours and a logarithmic decay of the time correlation function are in excellent agreement with Monte Carlo simulations, revealing an universal hopping transport mechanism best described by Efros-Shklovskii''s law. © 2021 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Intrinsic and selective activity of functionalized carbon nanotube/nanocellulose platforms against colon cancer cells

  • González-Domínguez, J. M.
  • Grasa, L.
  • Frontiñán-Rubio, J.
  • Abás, E.
  • Domínguez-Alfaro, A.
  • Mesonero, J. E.
  • Criado, A.
  • Ansón-Casaos, A.
Given their large surface area and versatile chemical reactivity, single-walled carbon nanotubes (SWCNTs) are regarded as the basis of new pharmacological complexes. In this study, SWCNTs are chemically functionalized with fluorescein, folic acid, and capecitabine, a drug that is commonly used against colorectal cancer. These functionalized SWCNTs are dispersed in water by taking advantage of their synergistic interaction with type-II nanocrystalline cellulose (II-NCC), and the resulting colloidal system is tested in vitro on both normal (differentiated) and cancerous (proliferative) human colon cells (Caco-2). The functionalized SWCNT/II-NCC hybrids show a higher activity than the reference (capecitabine) against the Caco-2 cancer cell line. However, this effect appears to be intrinsically associated with the SWCNT/II-NCC complex, particularly boosted by fluorescein, as the presence of capecitabine is not required. In addition, confocal microscopy fluorescence imaging using cell cultures highlights the enormous potential of this nanohybrid platform for colon cancer theranostics. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon nanotube film electrodes with acrylic additives: Blocking electrochemical charge transfer reactions

  • Ansón Casados, A.
  • Sanahuja Parejo, O.
  • Hernández Ferrer, J.
  • Benito, Ana M.
  • Wolfgang K., Maser
Carbon nanotubes (CNTs) processed into conductive films by liquid phase deposition technologies reveal increasing interest as electrode components in electrochemical device platforms for sensing and energy storage applications. In this work we show that the addition of acrylic latex to water-based CNT inks not only favors the fabrication of stable and robust flexible electrodes on plastic substrates but, moreover, sensitively enables the control of their electrical and electrochemical transport properties. Importantly, within a given concentration range, the acrylic additive in the films, being used as working electrodes, effectively blocks undesired faradaic transfer reactions across the electrode–electrolyte interface while maintaining their capacitance response as probed in a three-electrode electrochemical device configuration. Our results suggest a valuable strategy to enhance the chemical stability of CNT film electrodes and to suppress non-specific parasitic electrochemical reactions of relevance to electroanalytical and energy storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The viscosity of dilute carbon nanotube (1D) and graphene oxide (2D) nanofluids

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Sanahuja-Parejo, O.
  • Víctor-Román, Sandra
  • González-Domínguez, J.M.
  • García-Bordejé, E.
  • Benito, Ana M.
  • Maser, W.K.
Controlling the physicochemical properties of nanoparticles in fluids directly impacts on their liquid phase processing and applications in nanofluidics, thermal engineering, biomedicine and printed electronics. In this work, the temperature dependent viscosity of various aqueous nanofluids containing carbon nanotubes (CNTs) or graphene oxide (GO), i.e. 1D and 2D nanoparticles with extreme aspect ratios, is analyzed by empirical and predictive physical models. The focus is to understand how the nanoparticle shape, concentration, motion degrees and surface chemistry affect the viscosity of diluted dispersions. To this end, experimental results from capillary viscosimeters are first examined in terms of the energy of viscous flow and the maximum packing fraction applying the Maron–Pierce model. Next, a comparison of the experimental data with predictive physical models is carried out in terms of nanoparticle characteristics that affect the viscosity of the fluid, mostly their aspect ratio. The analysis of intrinsic viscosity data leads to a general understanding of motion modes for carbon nanoparticles, including those with extreme aspect ratios, in a flowing liquid. The resulting universal curve might be extended to the prediction of the viscosity for any kind of 1D and 2D nanoparticles in dilute suspensions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Explosive percolation yields highly-conductive polymer nanocomposites

  • Meloni, M.
  • Large, M. J.
  • González Domínguez, J. M.
  • Victor-Román, S.
  • Fratta, G.
  • Istif, E.
  • Tomes, O.
  • Salvage, J. P.
  • Ewels, C. P.
  • Peláez-Fernandez, M.
  • Arenal, R.
  • Benito, A.
  • Maser, W. K.
  • King, A. A. K.
  • Ajayan, P. M.
  • Ogilvie, S. P.
  • Dalton, A. B.
Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes

  • Ansón-Casaos, A.
  • Martínez-Barón, C.
  • Angoy-Benabarre, S.
  • Hernández-Ferrer, J.
  • Benito, A.M.
  • Maser, W.K.
  • Blesa, M.J.
Dye sensitization of semiconductor metal oxides aims to extend the light absorption range into the visible region, of particular interest for their use as photoanodes in photoelectrochemical (PEC) water splitting. Organic dyes, however, suffer from limited chemical stability when they are exposed to constant potential and irradiation in aqueous media. Thus, in this work, we evaluate a novel metal-free donor-π-acceptor (D-π-A) dye (AT-Pyri), demonstrating significant sensitization of film photoanodes based on TiO2 nanoparticles. Among a series of tested sacrificial agents, the addition of triethanolamine (TEOA) to the sodium sulphate electrolyte prevents the degradation of AT-Pyri even after several hours of operation. Combining two sacrificial agents (methanol and TEOA) results in a synergetic improvement of the PEC water-splitting activity. Notably, the stabilization of the AT-Pyri photoanode is accompanied by a substantial increase in the photocurrent over the reference TiO2 photoanode, while the associated spikes in transient photocurrent measurements disappear.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, J.
  • Galán-González, A.
  • Ansón-Casaos, A.
  • Navarro-Rodríguez, M.
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla, J.
  • Urbina, A.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improved O2-assisted styrene synthesis by double-function purification of SWCNT catalyst

  • Mercadal, Juan J.
  • Mayoral, Alvaro
  • Fierro, José Luis G.
  • García-Bordejé, Enrique
  • Melián-Cabrera, Ignacio
The catalytic performance of SWCNT was notably improved in the oxidative dehydrogenation of ethylbenzene (EB) to styrene (ST) upon a double-function purification in one step of the raw SWCNT. This consists of lowering the MeOx concentration and generating surface C=O groups after processing it in nitric acid at controlled conditions, while preserving the structure. The textural improvement was ascribed to the cutting of the tubes/bundles by oxidation and to MeOx removal itself (dilution effect). Both EB conversion and ST selectivity increased with a parallel lowering of the undesired COx selectivity. The conversion was interpreted by the enhancement of the intrinsic properties (i.e., more surface ketonic groups) but also to the higher load of SWCNT in the bed upon purification; both factors contribute to a higher number of active sites (C=O) in the bed for styrene formation. The most purified catalyst underperformed in conversion once the purification altered the SWCNT structure notably. Thus, preserving the structure is an important condition to achieve high conversion and yield. The better selectivity was explained in two ways; more styrene-forming sites (C=O) or less COx-forming sites (uncoated MeOx) in the bed, or both. The styrene yield per catalyst volume was improved by an average of ca. 240 % in comparison to the non-purified SWCNT. Deactivation is critical in maximizing the purification effect on the intrinsic and volumetric yields. In practical terms, the purification method proved to enhance the reaction; the selectivity towards the unwanted COx was significantly lowered with a gain towards styrene, achieving comparable selectivity values as in the conventional process, but operated at much lower temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, V.
  • Rubio, C.
  • Galán-González, A.
  • Muñoz, E.
  • Benito, A. M.
  • Maser, W. K.
  • Coronas, J.
  • Téllez, C.
The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m-2 h-1 bar-1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m-2 h-1 bar-1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Detailed thermal reduction analyses of graphene oxide via in-situ TEM/EELS studies

  • Pelaez-Fernandez, M.
  • Bermejo, A.
  • Benito, A.M.
  • Maser, W.K.
  • Arenal, R.
We report an in-depth study of the reduction of graphene oxide (GO) by in-situ thermal transmission electron microscopy (TEM) analysis. In-situ heating high-resolution TEM (HRTEM) imaging and electron energy-loss spectroscopy (EELS) measurements have been combined to identify the transformations of different oxygen functional groups, the desorption of physisorbed and chemisorbed water and the graphitisation as a function of the temperature in the range from 70 up to 1200 °C. A model for the general removal of water and OFGs is proposed based on different chemical and physical parameters that have been monitored. All this unique information provides a detailed roadmap of the thermal behaviour of GO at an extended range of temperature. This is not only of interest to understand the thermal reduction process of GO but also of critical relevance to the response of GO in applications when exposed to thermal effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rational description and modelling of the separation of nanotubes from solid nanoparticles in centrifugation processes

  • Ciria J.C.
  • Ansón-Casaos A.
  • Benito A.M.
  • Maser W.K.
Centrifugation of liquid dispersions is a typical technique being employed to separate single-walled carbon nanotubes (SWCNTs) from big aggregates and impurities. Shining light on the underlying mechanism contributes to a more efficient preparation of corresponding suspensions or inks with improved properties. In this work, we model the sedimentation process by applying fundamental equations and a mathematical algorithm for the centrifugation routine, which takes into account centrifugation parameters and the geometry of nanoparticles. The model is fed with experimental data, namely, the centrifugation mass yield, the SWCNT purity index, metal contents, and nanoparticle sizes measured for pristine, thermally-oxidized, and chemically functionalized SWCNT samples. Particle aggregation, including SWCNT bundling, and changes due to physicochemical pretreatments are taken into account. It is shown that the complete experimental data set can be quantitatively well understood in terms of the particle sedimentation coefficient. The proposed model thus provides a rational concept to optimize centrifugation protocols for the separation of mixtures containing nanoparticles of different shapes.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez Herranz, Silvia|||0000-0002-1999-5605
  • Sierra Gómez, Tania|||0000-0003-3019-2026
  • Álvarez Sánchez, Miguel A.
  • González Domínguez, José L.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillen, Agustín G.
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
10 p., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L?1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Comunidad de Madrid; Ministerio de Economía y Competitividad de España; CRUE-CSIC; Gobierno de Aragon, Comunidad de Madrid, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Gobierno de Aragón