Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Metal organic framework top-down and bottom-up patterning techniques

  • Ruiz-Zambrana, C.L.
  • Malankowska, M.
  • Coronas, J.
Metal organic frameworks (MOFs) have recently attracted considerable research interest in several fields from coordination chemistry and materials science to engineering and medicine not only due to energy and environmental issues but also due to the need for new paradigms of efficiency and sustainability according to the requirements of the 21st century global society. Because of their crystalline and organic-inorganic nature, they are able to crystallize constituting intergrown architectures ductile enough to be patterned, with the use of appropriate techniques, as nano- and micro-devices with multiple applications. This perspective comprehensively summarizes the recent state of the art in the use of top-down and bottom-up methodologies to create MOF structures with a defined pattern at the nano- and micro-scale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Solventless synthesis of ZIF-L and ZIF-8 with hydraulic press and high temperature

  • Pérez-Miana, M.
  • Reséndiz-Ordóñez, J.U.
  • Coronas, J.
In recent years, alternative methods to conventional synthesis of MOFs (metal-organic frameworks) have emerged due to the problematic use of solvents for both the environment and human health. Here we present the synthesis of ZIFs (zeolitic imidazolate frameworks) at high pressure by means of a hydraulic press provided with a heating mechanism. By the optimization of parameters such as temperature, time and the addition of promotor NH4NO3, a considerable increase in the reaction yield was achieved in products, neither washed nor activated, obtained since the first minute of reaction. Depending on the operation conditions, ZIF-L appeared as competing phase with ZIF-8. Upon transformation of ZIF-L into ZIF-8 in presence of ethanol, a reaction yield of 58.2% was achieved to highly crystalline ZIF-8 with a BET specific surface area of 947 m2/g. This green, fast, versatile and improved method suggests a possible way to future synthesis of other MOFs and the possibility of their industrial implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improving CO2 methanation performance by distributed feeding in a Ni-Mn catalyst fixed bed reactor

  • Aragüés-Aldea, P.
  • Sanz-Martínez, A.
  • Durán, P.
  • Francés, E.
  • Peña, J.A.
  • Herguido, J.
It has been successfully demonstrated the effect of feeding reactants in distributed manner for the reaction of methanation of CO2. This operation mode has improved not only the selectivity towards CH4, but also the overall process performance. A fixed bed reactor, loaded with Ni-Mn based catalyst, was operated co-feeding both CO2 and H2, but alternatively feeding one of them through several lateral inlets. Preserving the same global W/FCO2 ratio, the side distribution of CO2 allowed to clearly increase the activity of the process (e.g., at 375 °C, the conversion with distributed feeding was around 35% higher than that for the conventional one: XCO2 = 0.12 vs. XCO2 = 0.09). Furthermore, a substantially lower selectivity towards non-desired CO was obtained at any conversion level (e.g., SCO = 0.45 vs. SCO = 0.70, when XCO2 = 0.10). In addition, a more homogeneous temperature profile could be achieved in the bed without increasing the severity of hot spots appearance. On the contrary, side distribution of H2 always led to similar or worse results than for the conventional co-feeding configuration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis of ZIF-94 from Recycled Mother Liquors: Study of the Influence of Its Loading on Postcombustion CO2 Capture with Pebax Based Mixed Matrix Membranes

  • Hasan, M.R.
  • Paseta, Lorena
  • Malankowska, M.
  • Téllez, Carlos
  • Coronas, Joaquín
Global energy demand is met in large part, by burning of fossil fuels, which is causing global warming. Mixed matrix membranes (MMMs) with metal organic frameworks (MOFs) as fillers are an interesting alternative for capturing post combustion CO2 which would make the energy sector sustainable. This research is focused on the synthesis of MOF ZIF-94 from the recycling of its mother liquors and the incorporation of synthesized MOF into a Pebax MH 1657 for MMM fabrication. The pH and the temperature of ZIF-94 synthesis are modified and monitored and this results in various nanoparticle diameters (average particle size in the range of 41 ± 8–180 ± 73 nm). Incorporation of ZIF-94 significantly improves the performance of the bare Pebax MH 1657 membrane. The maximum CO2/N2 selectivity and CO2 permeability are obtained for 10 wt% ZIF-94 loading in 9 wt% (polymer concentration in 70/30 (v/v) ethanol/water solution) Pebax MH 1657 matrix being 36 ± 7 (71% increment compared to bare membrane) and 137 ± 31 Barrer (80% improvement), respectively. © 2021 The Authors. Advanced Sustainable Systems published by Wiley-VCH GmbH
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comparative study between single gas and mixed gas permeation of polyether-block-amide type copolymer membranes

  • Martínez-Izquierdo, L.
  • Perea-Cachero, A.
  • Malankowska, M.
  • Téllez, C.
  • Coronas, J.
We analyze the gas separation performance of five polyether-block-amide type copolymers (Pebax® 1657, Renew®, 2533, 3533 and 4533). These codes are composed of different hard and rubbery segments with different proportions. Dense membranes were prepared by the casting-solution method and studied by elemental, thermogravimetric and X-ray diffraction analyses, FTIR-ATR spectroscopy and single and mixed gas permeation. Codes with the best separation performance are those of polyethylene oxide as the soft phase (Pebax® 1657 and Renew®) due to the more intense interactions of this segment with CO2, which increases the CO2/N2 solubility selectivity (17.5 and 30.5 for Pebax® 1657 and Renew®, respectively) and hence the CO2/N2 separation selectivity of the membrane (36 and 37 for Pebax® 1657 and Renew®, respectively, obtained from mixed gas permeation). It is also noticeable that the proportion of the soft phase in the copolymer determines the permeability of CO2. It was found that the codes with a greater soft/hard segment ratio (Pebax® 2533 and 3533) have also a greater permeability value (239 and 220 Barrer for Pebax® 2533 and 3533, respectively, measured by mixed gas permeation). Pebax® Renew® was the polymer with the best separation performance with CO2 permeabilities of 167 and 164 Barrer and CO2/N2 selectivities of 41 and 37, measured by single and mixed gas permeation, respectively. The comparison between the single and mixture gas permeation results revealed a relatively good correspondence between both for most of the Pebax® codes tuned by the solubility and diffusion properties of the polymers. © 2022 The Authors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Self-supported single-wall carbon nanotube buckypaper membranes applied to air and water filtration

  • Berned-Samatán, Víctor
  • Jiménez, Santiago
  • Rubio, César
  • Téllez, Carlos
  • Coronas, Joaquín
Background: This work addresses the use of self-supported single-wall carbon nanotube (SWCNT) buckypapers asfilters ormembranes to treat air or water streams to reduce the concentration of pollutants.Results: The fabrication of the buckypapers was carried out by a facilefiltration method. The performance of the buckypaper asan airfilter was tested with a NaCl aerosol obtaining a permeance of 241 m3m−2h−1bar−1and afiltration efficiency of99.9991%. The performance of the buckypaper as a water ultrafiltration (UF) membrane was studied separating ZIF-8 nanopar-ticles of 30, 50 and 120 nm in diameter, achieving a permeance of 124 L·m−2h−1bar−1and a rejection of 99.99%.Conclusions: A simple technique is described for the rapid fabrication of self-supported SWCNT buckypaper membranes with afiltration method resulting in an excellent performance in both air and waterfiltration. In addition, because of the acquired con-trol of ZIF-8 crystallization, particles of different sizes of this material were synthesizedad hocto serve as a reference solute ofUF separation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly stable Pebax® Renew® thin-film nanocomposite membranes with metal organic framework ZIF-94 and ionic liquid [Bmim][BF4] for CO2 capture

  • Martínez-Izquierdo, Lidia
  • Téllez, Carlos
  • Coronas, Joaquín
Ionic liquid [Bmim][BF4] and metal organic framework ZIF-8 and ZIF-94 nanoparticles were incorporated into polymer Pebax® Renew® 30R51 to obtain highly efficient thin-film nanocomposite membranes, ca. 300 nm thick.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of MIL-178(Fe) and Pebax® 3533 loading in mixed matrix membranes for CO2 capture

  • Hasan, Md R.
  • Zhao, H.
  • Steunou, N.
  • Serre, C.
  • Malankowska, M.
  • Téllez, C.
  • Coronas, J.
Global warming is considered as a consequence of extensive use of fossil fuels. Post combustion CO2 capture is an interesting and alternative solution where mixed matrix membranes (MMMs) can be an exciting candidate. This research focuses on the optimization of MMM composition consisting of Pebax® 3533 as the polymer matrix and porous coordination polymer (PCP) MIL-178(Fe) as a filler for gas separation application. MIL-178(Fe) characterized with SEM, TEM and TGA were applied to compare bare polymer and MMM. Optimum composition of the MMM obtained was 5 wt.% MIL-178(Fe) in Pebax® 3533. Average thickness of the optimized dense MMM was 116 ± 8 µm. Such MMM showed CO2 permeability and CO2/N2 selectivity of 312 ± 5 Barrer and 25.0 ± 0.5, respectively, 12% and 25% improved regarding the bare membrane. Additionally, optimum MMM was applied for CO2/CH4 separation and successfully compared in terms of improved CO2 permeability and CO2/CH4 selectivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Double-Layered Pebax® 3533/ZIF-8 Membranes with Single-Walled Carbon Nanotube Buckypapers as Support for Gas Separation

  • Berned-Samatán, Víctor
  • Téllez, Carlos
  • Coronas, Joaquín
Single-walled carbon nanotube buckypapers (SWCNT-bps) coated with a metal–organic framework ZIF-8 layer were used as supports for the preparation of Pebax® 3533 TFC membranes by both phase inversion and spin coating techniques. Upon proper characterization of the materials by X-ray diffraction, IR spectroscopy, thermogravimetry and electron microscopy, the obtained membranes were tested in gas separation experiments with a 15:85 CO2/N2 mixture. These experiments proved that the ZIF-8 layer prevented from the penetration of the polymer selective film into the SWCNT-bp support, giving rise to a highly permeable selective membrane. The optimum membrane was achieved by the spin-coating method, with better permeation results than that prepared by the phase inversion method, obtaining a CO2 permeance of 566 GPU together with a CO2/N2 selectivity of 20.9.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanofiltration with polyamide thin film composite membrane with ZIF-93/SWCNT intermediate layers on polyimide support

  • Berned-Samatán, Victor
  • Piantek, Marten
  • Coronas, Joaquín
  • Téllez, Carlos
Among current separation processes, nanofiltration (NF), besides its easy scalability, exhibits low energy consumption, environmental impact and footprint, being widely used for water treatment and solvent recovery. The development of membranes for NF involves perfecting the skin selective layer, the sublayers and the support. In this work, a multilayer structure membrane is presented where a selective layer of polyamide (PA, thickness 40–60 nm) was interfacially polymerized on a sub-layer of MOF ZIF-93 (thickness ∼ 50 nm) grown on another sub-layer of single-walled carbon nanotubes (SWCNT, thickness ∼ 400 nm) vacuum filtrated on an asymmetric polyimide P84® support (thickness ∼ 200 μm). The membrane with structure PA/ZIF-93/SWCNT/P84 showed excellent results in water NF and methanol organic solvent NF of different dyes (with the highest values of water and methanol permeances of up to 57.6 and 84.5 L·m−2·h−1·bar−1, respectively, with rejections usually greater than 99%). By means of a wide range of characterization techniques (contact angle, AFM, XRD, ATR-FTIR and FIB-SEM) the role of every component in the membrane was elucidated. In fact, the presence of the sublayer of ZIF-93 increased the roughness and hydrophilicity as well as decreased the thickness of the PA layer. These effects are related to the fact that the sublayers subordinate the interfacial polymerization as well as influence the properties of the PA film and therefore its NF performance, even showing chlorine resistance as well as ten-day cross-flow NF stability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Co2 rich streams methanization intensified by steam adsorption with lta zeolites in fluidized bed reactor.

  • de Matías, Irene
  • Sanz-Martínez, Andrés
  • Mercader, Víctor
  • Durán, Paul
  • Francés, Eva
  • Herguido, Javier
  • Peña, José Angel
The Sabatier reaction enhanced by selective water sorption (SESaR process), was evaluated in a fluidized bed reactor. This constitutes a configuration alternative to the traditional fixed bed one. A Ni-Fe bimetallic catalyst (Al2O3 as support) and zeolite 5A as adsorbent were used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membranes in CO2 separation applications

  • Embaye, Alula Selomon
  • Martinez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Tellez, Carlos
  • Coronas, Joaqui´n
Poly(ether-block-amide) (PEBA, commercialized as Pebax) copolymer membranes show a highly promising platform for preparing high-performance membranes for CO2 capture from process streams containing CH4 and N2. Pebax combines high CO2 affinity with the desired mechanical strength for polymeric membranes thanks to its flexible polyether segment and hard polyamide block, respectively. Furthermore, researchers have been improving the performance of these membranes by preparing a thin Pebax selective layer on top of porous supports and by incorporating inorganic and organic nanofillers into the Pebax matrix to overcome the permeance-selectivity limit. The chemical and structural characteristics of Pebax membranes according to the different fabrication techniques and parameters are discussed first. Then, the recent developments in terms of both Pebax-based thin film composite and mixed matrix membranes are summarized. Finally, thermal and water stabilities of these membranes are addressed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Lindane removal by membrane nanofiltration

  • Ruiz-Gutierrez, Adrián
  • Lasobras, Javier
  • Coronas, Joaquín
  • Menéndez, Miguel
  • Luque-Alled, José Miguel
Lindane is the γ-isomer of 1,2,3,4,5,6-hexachlorocyclohexane (HCH) and it has been widely used in the pesticide industry due to its insecticide properties. In the production of lindane, significant quantities of other HCH isomers are generated as byproducts. All these compounds are typically stored in landfills, often with poor management practices. Polyamide membranes, two commercial membranes from Alfa Laval (NF99HF and NF99) and homemade thin film composite membranes prepared by interfacial polymerization on a porous polyimide support, were evaluated for water nanofiltration (NF) of HCH isomers, including lindane. Homemade membranes, with a lindane rejection of 91.3 % and a permeance of 2.7 L·m−2·h−1·bar−1, offered the highest performance in terms of both permeance and rejection. NF99 and homemade membranes were proven to be equally effective in removing α-HCH and β-HCH, showing similar results. Homemade membranes achieved 99.5 and 99.8 % rejections for α-HCH and β-HCH, respectively. Long-term experiments were carried out with NF99 and homemade membranes to assess their stability during filtrations with lindane solutions for up to 214 h. Homemade TFC membrane maintained its initial rejection (ca. 93.5 %) after 214 h, although its permeance decreased over time, ending in 2.5 L·m−2·h−1·bar−1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sustainable ß- and ¿-cyclodextrins for development of highly permeable thin film composite nanofiltration membranes

  • Pina-Vidal, Cristina
  • Luque-Alled, Jose Miguel
  • Coronas, Joaquín
  • Téllez, Carlos
The use of macromolecules, such as cyclodextrins (CDs), given their porosity and compatibility with organic materials, are very attractive for the progress of polymeric membranes in nanofiltration (NF) of aqueous dye solutions. Two types of membranes were fabricated. Firstly, β- and γ-CDs were incorporated to polyamide (PA) thin film composite (TFC) membranes. These membranes, named CD/MPD-TMC, were prepared by conventional interfacial polymerization —i.e., an aqueous solution of m-phenylenediamine (MPD) followed by a solution of trimesoyl chloride (TMC) in hexane— by replacing a certain amount of the MPD monomer with varying proportions of CDs. Secondly, two-step double-IP (TD-IP) membranes were fabricated as follows: CDs were deposited atop the polymer support, followed by addition of TMC —forming a polyester (PE) layer—, and subsequently the membrane surface was modified with MPD molecules. In both CD/MPD-TMC and TD-IP membranes, the presence of CDs improved the membrane performance, the latter configuration leading to much higher water permeances. The TD-IP membrane using β-CD achieved the highest water permeance of 10 L m−2 h−1·bar−1 (LMH bar−1) and a rejection of acridine orange dye (265 Da) greater than 98 %. This represents a 6-fold increase in water permeance compared to bare PA (1.6 LMH bar−1). The enhanced water transport was mainly attributed to the more hydrophilic nature of the membranes and the presence of a PE layer with a porous structure and high pore connectivity. High dye rejection resulted from electrostatic and Donnan repulsions due to surface modification with MPD molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Lindane removal by catalytic hydrodechlorination

  • Ruiz-Gutiérrez, A.
  • Lasobras, J.
  • Menéndez, M.
Lindane is an organochlorine pesticide, that has caused contamination of soil, water and air. This paper studies catalytic hydrodechlorination as a possible solution to the lindane problem in water streams. Several catalysts were tested. The effects of mass transfer and temperature was studied for a Ni-based and a Pt-based catalysts. A Ni-supported and a Pt-supported catalyst gave good results, but the best catalyst was Pd supported on active carbon, which provided 99% conversion in a few minutes at room temperature. Additional tests allow to discard adsorption instead of a catalytic effect. The amount of hexachlorocyclohexane compounds remaining as adsorbed on the catalyst surface was negligible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vapor phase interfacial polymerization: a method to synthesize thin film composite membranes without using organic solvents

  • Paseta, L.
  • Echaide-Górriz, C.
  • Téllez, C.
  • Coronas, J.
Thin film composite membranes (TFC) of polyamide (PA) prepared by interfacial polymerization (IP) between a diamine and an acyl chloride are applied to industrial nanofiltration and reverse osmosis. Water, to dissolve the diamine, and n-hexane, to dissolve the acyl chloride, solvents are involved in the IP process. Eliminating the use ofn-hexane would be crucial to produce a greener TFC membrane synthesis method. This is achieved here by carrying out an interfacial polymerization from the vapor phase. First, the membrane support was impregnated with the aqueous diamine solution. Second, the support with the diamine was contacted with vapors of the acyl chloride to unchain the IP reaction. Besides the absence ofn-hexane, acyl chloride was applied more efficiently avoiding its loss during the cleaning operations carried out in the typical IP process. These membranes were applied in the nanofiltration of simulated micropollutants in water (rose Bengal, sunset yellow and acridine orange dyes), with higher water permeance (up to 3.3 L·m-2·h-1·bar-1) than that of conventional TFC membranes and dye rejections higher than 94% in all cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, V.
  • Rubio, C.
  • Galán-González, A.
  • Muñoz, E.
  • Benito, A. M.
  • Maser, W. K.
  • Coronas, J.
  • Téllez, C.
The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m-2 h-1 bar-1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m-2 h-1 bar-1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Phase inversion method for the preparation of Pebax® 3533 thin film membranes for CO2/N2separation

  • Martínez-Izquierdo L.
  • Malankowska M.
  • Téllez C.
  • Coronas J.
Thin film composite membranes of poly(ether-block-amide) copolymer Pebax® 3533 were prepared for the first time on asymmetric polysulfone supports by a phase inversion method. The casting solution concentration and the number of layers were varied to study their influence on the selective layer thickness and the gas separation performance. The casting solution concentrations of polymer dissolved in the 1-propanol/1-butanol mixture were 0.25, 0.5, 1.0 and 1.5 wt%. These conditions produced membranes with selective skin layers with thicknesses from 0.2 to 1.8 µm. All the membranes were characterized by scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. Furthermore, the intrinsic viscosity of all the casting solutions was studied to understand the effect of the polymer concentration on the homogeneity and the gas separation properties of the obtained membranes. In general, lower viscosity of casting solutions rendered to more defective skin layers, resulting in a higher number of layers required to obtain selective membranes. The gas separation performance was tested for the post-combustion 15/85 CO2/N2 mixture at 25-50 °C and under a feed pressure of 3 bar. The best separation performance was achieved with the 0.5 wt% casting solution membranes after the deposition of four polymer layers, obtaining a CO2 permeance of 127 GPU and a CO2/N2 selectivity of 21.4 at 35 °C, the same selectivity of the corresponding dense membrane but with much higher permeance.