Skip to main content

NUEVAS CONFIGURACIONES DE REACTOR PARA VALORIZACION ENERGETICA CONJUNTA DE BIOGAS E HIDROGENO RENOVABLE

CTQ2016-77277-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Biogas to high purity hydrogen by methane dry reforming in TZFBR+MB and exhaustion by Steam-Iron Process. Techno–economic assessment

  • Lachén, J.
  • Durán, P.
  • Menéndez, M.
  • Peña, J.A.
  • Herguido, J.
A techno-economic study has been carried out with the aim of analyzing the performance (product distribution and energy yields) and estimating the production costs of high purity hydrogen obtained from biogas. For such purpose and taking advantage of empirical data developed in our laboratory, it has been proposed a system consisting of a two-zone fluidized bed reactor aided by a system of permselective (Pd/Ag) metallic membranes inserted in the fluidized bed (TZFBR+MB), and a battery of several fixed bed reactors operating cycles of reduction and oxidation (Steam-Iron Process -SIP-). The feed has always been an equimolar mixture of CH4 and CO2 simulating a sweetened biogas. The first reactor (TZFBR+MB) can produce a stream of pure hydrogen (i.e. PEMFC quality) as permeated flow through the MB, and a retentate stream rich in all species resulting from the methane dry reforming reaction (MDR) and the water gas shift equilibrium (WGS). The singularity of this kind of complex reactors is that regeneration of the catalyst is performed in the same reactor and simultaneously to the MDR reaction because of the two-zone. Due to the reductive behavior of the retentate stream, it can be fed to a bed of solid where up to two different oxygen carriers (iron oxide with additives and cobalt ferrite) can be reduced to their metallic state. Once the solid has been completely reduced, it can be reoxidized with steam releasing a high purity hydrogen stream. Both reactors (i.e. TZFBR+MB and SIP) have been coupled in different degrees. A performance (hydrogen and energy yields) as well as costs analysis (fixed assets and operating costs) have been performed with the aid of Aspen HYSYS v9.0, used for dimensioning the equipment needed to process up to 1350 kg/h of biogas. On this way, the integrated process enhances the efficiencies of every single process allowing pure hydrogen yields up to 68% at 575 °C in the TZFBR+MB and an overall energy efficiency greater than 45%. Production costs have been found to be in the range from 4 to 15 €/kg, still high but not so far away from the target of DOE fixed in 2 $/kg by 2020.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Production and purification of hydrogen by biogas combined reforming and steam-iron process

  • Lachén, J.
  • Herguido, J.
  • Peña, J.A.
Cobalt ferrite and hematite with minor additives have been tested for production and purification of high purity hydrogen from a synthetic biogas by steam-iron process (SIP) in a fixed bed reactor. A catalyst based in nickel aluminate has been included in the bed of solids to enhance the rate of the reaction of methane dry reforming (MDR). The reductants resulting from MDR are responsible for reducing the oxides based on iron that will, in the following stage, be oxidized by steam to release hydrogen with less than 50 ppm of CO. Coke minimization along reduction stages forces to operate such reactors above 700 °C for reductions, and as low as 500 °C for oxidations to avoid coke gasification. To avoid problems such as reactor clogging by coke in reductions and/or contamination of hydrogen by gasification of coke along oxidations, steam in small proportions has been included in the feed with the aim of minimizing or even avoiding formation of carbonaceous depositions along the reduction stage of SIP. Since steam is an oxidant, it exerts an inhibiting effect upon reduction of the oxide, that slows down the efficiency of the process. It has been proved that co-feeding low proportions of steam with an equimolar mixture of CH4 and CO2 (simulating a poor heating value desulphurized biogas) is able to avoid coke deposition, allowing the operation of both, reductions and oxidations, in isothermal regime (700 °C). Empirical results have been contrasted with data found in literature for similar processes based in MDR and combined (or mixed) reforming process (CMR), concluding that the combination of MDR + SIP proposed in this work, taking apart economic aspects and complex engineering, shows similar yields towards hydrogen, but with the advantage of not requiring a subsequent purification process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improving CO2 methanation performance by distributed feeding in a Ni-Mn catalyst fixed bed reactor

  • Aragüés-Aldea, P.
  • Sanz-Martínez, A.
  • Durán, P.
  • Francés, E.
  • Peña, J.A.
  • Herguido, J.
It has been successfully demonstrated the effect of feeding reactants in distributed manner for the reaction of methanation of CO2. This operation mode has improved not only the selectivity towards CH4, but also the overall process performance. A fixed bed reactor, loaded with Ni-Mn based catalyst, was operated co-feeding both CO2 and H2, but alternatively feeding one of them through several lateral inlets. Preserving the same global W/FCO2 ratio, the side distribution of CO2 allowed to clearly increase the activity of the process (e.g., at 375 °C, the conversion with distributed feeding was around 35% higher than that for the conventional one: XCO2 = 0.12 vs. XCO2 = 0.09). Furthermore, a substantially lower selectivity towards non-desired CO was obtained at any conversion level (e.g., SCO = 0.45 vs. SCO = 0.70, when XCO2 = 0.10). In addition, a more homogeneous temperature profile could be achieved in the bed without increasing the severity of hot spots appearance. On the contrary, side distribution of H2 always led to similar or worse results than for the conventional co-feeding configuration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Biogas Upgrading by CO2 Methanation with Ni-, Ni–Fe-, and Ru-Based Catalysts

  • Sanz Martínez, Andrés
  • Durán, Paul
  • Mercader, Víctor D.
  • Francés, Eva
  • Peña, José Ángel
  • Herguido, Javier
This piece of work dealt with the concept of ‘biogas upgrading’ or enrichment of the CH4 contained in a sweetened biogas to proportions and features comparable to those of synthetic natural gas (SNG). For this, the behavior of three lab made catalysts (Ni/Al2O3, Ru/Al2O3, and Ni–Fe/Al2O3) was tested in a CO2 methanation reaction (Sabatier reaction) under different feeding conditions (with and without methane). In the first set of experiments (without methane), the good catalytic behavior of the solids was validated. All three catalysts offered similar and increasing CO2 conversions with increasing temperature (range studied from 250 to 400 °C) at a constant WHSV of 30 × 103 STPmL·gcat−1·h−1. The CH4 selectivity remained close to one in all cases. Considering their total metallic load, the Ru (3.7 wt%)-based catalyst stood out remarkably, with TOF values that reached up to 5.1 min−1, this being six or three times higher, than those obtained with the Ni (10.3 wt%) and Ni–Fe (7.4–2.1 wt%) catalysts, respectively. In the second set (cofeeding methane), and also for the three catalysts, a high correspondence between the conversions (and selectivities) obtained with both types of feeds was observed. This indicated that the addition of CH4 to the system did not severely modify the reaction mechanism, resulting in the possibility of taking advantage of the ‘biogas upgrading’ process by using H2 produced off-peak by electrolysis. In order to maximize the CH4 yield, temperatures in the range from 350–375 °C and a H2:CO2 molar ratio of 6:1 were determined as the optimal reaction conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High purity hydrogen from biogas via steam iron process: Preventing reactor clogging by interspersed coke combustions

  • Lachén, J.
  • Herguido, J.
  • Peña, J.A.
Production of high purity hydrogen from biogas by combined dry reforming of methane and steam iron process (SIP), outlines a serious drawback with the possible formation of coke deposits along reduction steps of the iron oxide. Steam used along reoxidations, which regenerates the iron oxide and force the release of high purity hydrogen, could also be responsible of the gasification of such coke deposits and the consequent contamination of hydrogen with carbonaceous species such as CO or CO2. Oxidations at low enough temperature can inhibit coke gasification, but paradoxically, increasing amounts of coke upon repeated cycles will provoke reactor clogging sooner or later. To circumvent this issue, a strategy consisting of interspersing coke combustion stages with diluted oxygen within the regular cycles of reduction with biogas and reoxidation with steam releasing hydrogen, has been analyzed with three solids based on iron oxide. It has been verified that including coke combustion stages within the regular scheme of redox cycles, not only counteracts both bed clogging and catalyst deactivation by coking, but also breaks down the trend to lose (by sintering) active material for the redox process, thus allowing the extension of the useful life of the solid.