Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Iron oxide ores as carriers for the production of high purity hydrogen from biogas by steam–iron process

  • Lachén, J.
  • Plou, J.
  • Durán, P.
  • Herguido, J.
  • Peña, J.A.
Production of high purity hydrogen (<50 ppm CO) by steam–iron process (SIP) from a synthetic sweetened biogas has been investigated making use of a natural iron ore containing up to 81 wt% of hematite (Fe2O3) as oxygen carrier. The presence of a lab-made catalyst (NiAl2O4 with NiO excess above its stoichiometric composition) was required to carry out the significant transformation of mixtures of methane and carbon dioxide in hydrogen and carbon monoxide by methane dry reforming reaction. Three consecutive sub-stages have been identified along the reduction stage that comprise A) the combustion of CH4 by lattice oxygen of NiO and Fe2O3, B) catalyzed methane dry reforming and C) G–G equilibrium described by the Water-Gas-Shift reaction. Oxidation stages were carried out with steam completing the cycle. Oxidation temperature was always kept constant at 500 °C regardless of the temperature used in the previous reduction to minimize the gasification of eventual carbon deposits formed along the previous reduction stage. The presence of other oxides different from hematite in minor proportions (SiO2, Al2O3, CaO and MgO to name the most significant) confers it an increased thermal resistance against sintering respecting pure hematite at the expense of slowing down the reduction and oxidation rates. A “tailor made” hematite with additives (Al2O3 and CeO2) in minor proportions (2 wt%) has been used to stablish comparisons in performance between natural and synthetic iron oxides. It has been investigated the effect of the reduction temperature, the proportion of methane to carbon dioxide in the feed (CH4:CO2 ratio) and the number of repetitive redox cycles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Biogas to high purity hydrogen by methane dry reforming in TZFBR+MB and exhaustion by Steam-Iron Process. Techno–economic assessment

  • Lachén, J.
  • Durán, P.
  • Menéndez, M.
  • Peña, J.A.
  • Herguido, J.
A techno-economic study has been carried out with the aim of analyzing the performance (product distribution and energy yields) and estimating the production costs of high purity hydrogen obtained from biogas. For such purpose and taking advantage of empirical data developed in our laboratory, it has been proposed a system consisting of a two-zone fluidized bed reactor aided by a system of permselective (Pd/Ag) metallic membranes inserted in the fluidized bed (TZFBR+MB), and a battery of several fixed bed reactors operating cycles of reduction and oxidation (Steam-Iron Process -SIP-). The feed has always been an equimolar mixture of CH4 and CO2 simulating a sweetened biogas. The first reactor (TZFBR+MB) can produce a stream of pure hydrogen (i.e. PEMFC quality) as permeated flow through the MB, and a retentate stream rich in all species resulting from the methane dry reforming reaction (MDR) and the water gas shift equilibrium (WGS). The singularity of this kind of complex reactors is that regeneration of the catalyst is performed in the same reactor and simultaneously to the MDR reaction because of the two-zone. Due to the reductive behavior of the retentate stream, it can be fed to a bed of solid where up to two different oxygen carriers (iron oxide with additives and cobalt ferrite) can be reduced to their metallic state. Once the solid has been completely reduced, it can be reoxidized with steam releasing a high purity hydrogen stream. Both reactors (i.e. TZFBR+MB and SIP) have been coupled in different degrees. A performance (hydrogen and energy yields) as well as costs analysis (fixed assets and operating costs) have been performed with the aid of Aspen HYSYS v9.0, used for dimensioning the equipment needed to process up to 1350 kg/h of biogas. On this way, the integrated process enhances the efficiencies of every single process allowing pure hydrogen yields up to 68% at 575 °C in the TZFBR+MB and an overall energy efficiency greater than 45%. Production costs have been found to be in the range from 4 to 15 €/kg, still high but not so far away from the target of DOE fixed in 2 $/kg by 2020.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Production and purification of hydrogen by biogas combined reforming and steam-iron process

  • Lachén, J.
  • Herguido, J.
  • Peña, J.A.
Cobalt ferrite and hematite with minor additives have been tested for production and purification of high purity hydrogen from a synthetic biogas by steam-iron process (SIP) in a fixed bed reactor. A catalyst based in nickel aluminate has been included in the bed of solids to enhance the rate of the reaction of methane dry reforming (MDR). The reductants resulting from MDR are responsible for reducing the oxides based on iron that will, in the following stage, be oxidized by steam to release hydrogen with less than 50 ppm of CO. Coke minimization along reduction stages forces to operate such reactors above 700 °C for reductions, and as low as 500 °C for oxidations to avoid coke gasification. To avoid problems such as reactor clogging by coke in reductions and/or contamination of hydrogen by gasification of coke along oxidations, steam in small proportions has been included in the feed with the aim of minimizing or even avoiding formation of carbonaceous depositions along the reduction stage of SIP. Since steam is an oxidant, it exerts an inhibiting effect upon reduction of the oxide, that slows down the efficiency of the process. It has been proved that co-feeding low proportions of steam with an equimolar mixture of CH4 and CO2 (simulating a poor heating value desulphurized biogas) is able to avoid coke deposition, allowing the operation of both, reductions and oxidations, in isothermal regime (700 °C). Empirical results have been contrasted with data found in literature for similar processes based in MDR and combined (or mixed) reforming process (CMR), concluding that the combination of MDR + SIP proposed in this work, taking apart economic aspects and complex engineering, shows similar yields towards hydrogen, but with the advantage of not requiring a subsequent purification process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High purity hydrogen from biogas via steam iron process: Preventing reactor clogging by interspersed coke combustions

  • Lachén, J.
  • Herguido, J.
  • Peña, J.A.
Production of high purity hydrogen from biogas by combined dry reforming of methane and steam iron process (SIP), outlines a serious drawback with the possible formation of coke deposits along reduction steps of the iron oxide. Steam used along reoxidations, which regenerates the iron oxide and force the release of high purity hydrogen, could also be responsible of the gasification of such coke deposits and the consequent contamination of hydrogen with carbonaceous species such as CO or CO2. Oxidations at low enough temperature can inhibit coke gasification, but paradoxically, increasing amounts of coke upon repeated cycles will provoke reactor clogging sooner or later. To circumvent this issue, a strategy consisting of interspersing coke combustion stages with diluted oxygen within the regular cycles of reduction with biogas and reoxidation with steam releasing hydrogen, has been analyzed with three solids based on iron oxide. It has been verified that including coke combustion stages within the regular scheme of redox cycles, not only counteracts both bed clogging and catalyst deactivation by coking, but also breaks down the trend to lose (by sintering) active material for the redox process, thus allowing the extension of the useful life of the solid.